diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 287 |
1 files changed, 0 insertions, 287 deletions
diff --git a/Makefile.in b/Makefile.in index d807d97..0121ad8 100644 --- a/Makefile.in +++ b/Makefile.in @@ -124,9 +124,6 @@ NM = nm LD = ld -BZIPPROG = bzip2 -MD5PROG = md5sum - # These values are substituted by configure. DEFAULT_YACC = @DEFAULT_YACC@ DEFAULT_LEX = @DEFAULT_LEX@ @@ -1807,290 +1804,6 @@ Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(SHELL) ./config.status # -# Support for building net releases - -# Files in devo used in any net release. -# ChangeLog omitted because it may refer to files which are not in this -# distribution (perhaps it would be better to include it anyway). -DEVO_SUPPORT= README Makefile.in configure configure.in \ - config.guess config.if config.sub config move-if-change \ - mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \ - COPYING COPYING.LIB install-sh config-ml.in symlink-tree \ - mkinstalldirs ltconfig ltmain.sh missing ylwrap \ - libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh - -# Files in devo/etc used in any net release. -# ChangeLog omitted because it may refer to files which are not in this -# distribution (perhaps it would be better to include it anyway). -ETC_SUPPORT= Makefile.in configure configure.in standards.texi \ - make-stds.texi standards.info* configure.texi configure.info* \ - configbuild.* configdev.* - - -# When you use `make setup-dirs' or `make taz' you should always redefine -# this macro. -SUPPORT_FILES = list-of-support-files-for-tool-in-question - -# NOTE: No double quotes in the below. It is used within shell script -# as VER="$(VER)" -VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \ - sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \ - elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \ - sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \ - elif test -f $(TOOL)/version.in; then \ - head -1 $(TOOL)/version.in; \ - elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \ - sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \ - else \ - echo VERSION; \ - fi` -PACKAGE = $(TOOL) - -.PHONY: taz -taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex - $(MAKE) -f Makefile.in do-proto-toplev \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - $(MAKE) -f Makefile.in do-md5sum \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - $(MAKE) -f Makefile.in do-tar \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - $(MAKE) -f Makefile.in do-bz2 \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - -.PHONY: gdb-tar -gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex - $(MAKE) -f Makefile.in do-proto-toplev \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - $(MAKE) -f Makefile.in do-md5sum \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - $(MAKE) -f Makefile.in do-djunpack \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - $(MAKE) -f Makefile.in do-tar \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - -.PHONY: gdb-taz -gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex - $(MAKE) -f Makefile.in gdb-tar \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - $(MAKE) -f Makefile.in do-bz2 \ - TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(SUPPORT_FILES)" - -.PHONY: do-proto-toplev -do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex - echo "==> Making $(PACKAGE)-$(VER)/" - # Take out texinfo from a few places. - sed -e '/^all\.normal: /s/\all-texinfo //' \ - -e '/^ install-texinfo /d' \ - <Makefile.in >tmp - mv -f tmp Makefile.in - # - ./configure sun4 - [ -z "$(CONFIGURE_TARGET_MODULES)" ] \ - || $(MAKE) $(CONFIGURE_TARGET_MODULES) \ - ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \ - CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)" - # Make links, and run "make diststuff" or "make info" when needed. - rm -rf proto-toplev ; mkdir proto-toplev - set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \ - for d in $$dirs ; do \ - if [ -d $$d ]; then \ - if [ ! -f $$d/Makefile ] ; then true ; \ - elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \ - (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \ - elif grep '^info:' $$d/Makefile >/dev/null ; then \ - (cd $$d ; $(MAKE) info ) || exit 1 ; \ - fi ; \ - if [ -d $$d/proto-$$d.dir ]; then \ - ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \ - else \ - ln -s ../$$d proto-toplev/$$d ; \ - fi ; \ - else ln -s ../$$d proto-toplev/$$d ; fi ; \ - done - cd etc && $(MAKE) info - $(MAKE) distclean - # - mkdir proto-toplev/etc - (cd proto-toplev/etc; \ - for i in $(ETC_SUPPORT); do \ - ln -s ../../etc/$$i . ; \ - done) - # - # Take out texinfo from configurable dirs - rm proto-toplev/configure.in - sed -e '/^host_tools=/s/texinfo //' \ - <configure.in >proto-toplev/configure.in - # - mkdir proto-toplev/texinfo - ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/ - if test -r texinfo/util/tex3patch ; then \ - mkdir proto-toplev/texinfo/util && \ - ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \ - else true; fi - chmod -R og=u . || chmod og=u `find . -print` - # - # Create .gmo files from .po files. - for f in `find . -name '*.po' -type f -print`; do \ - msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \ - done - # - -rm -f $(PACKAGE)-$(VER) - ln -s proto-toplev $(PACKAGE)-$(VER) - -.PHONY: do-tar -do-tar: - echo "==> Making $(PACKAGE)-$(VER).tar" - -rm -f $(PACKAGE)-$(VER).tar - find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \ - | tar cTfh - $(PACKAGE)-$(VER).tar - -.PHONY: do-bz2 -do-bz2: - echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2" - -rm -f $(PACKAGE)-$(VER).tar.bz2 - $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar - -.PHONY: do-md5sum -do-md5sum: - echo "==> Adding md5 checksum to top-level directory" - cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \ - | xargs $(MD5PROG) > ../md5.sum - mv md5.sum proto-toplev - -.PHONY: do-djunpack -do-djunpack: - echo "==> Adding updated djunpack.bat to top-level directory" - echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/' - sed < djunpack.bat > djunpack.new \ - -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/' - mv djunpack.new djunpack.bat - -rm -f proto-toplev/djunpack.bat - ln -s ../djunpack.bat proto-toplev/djunpack.bat - -TEXINFO_SUPPORT= texinfo/texinfo.tex -DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT) - -.PHONY: gas.tar.bz2 -GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep -gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas - $(MAKE) -f Makefile.in taz TOOL=gas \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" - -# The FSF "binutils" release includes gprof and ld. -.PHONY: binutils.tar.bz2 -BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep -binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils - $(MAKE) -f Makefile.in taz TOOL=binutils \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" - -.PHONY: gas+binutils.tar.bz2 -GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof -gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas - $(MAKE) -f Makefile.in taz TOOL=gas \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" - -GNATS_SUPPORT_DIRS=include libiberty send-pr -gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats - $(MAKE) -f Makefile.in taz TOOL=gnats \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)" - -.PHONY: gdb.tar.bz2 -GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl -gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(GDB_SUPPORT_DIRS)" -.PHONY: gdb.tar -gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(GDB_SUPPORT_DIRS)" - -DEJAGNU_SUPPORT_DIRS= tcl expect libiberty -.PHONY: dejagnu.tar.bz2 -dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu - $(MAKE) -f Makefile.in taz TOOL=dejagnu \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)" - -.PHONY: gdb+dejagnu.tar.bz2 -GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu -gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)" -.PHONY: gdb+dejagnu.tar -gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)" - -.PHONY: insight.tar.bz2 -INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui -insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)" -.PHONY: insight.tar -insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)" - -.PHONY: insight+dejagnu.tar.bz2 -INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu -insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)" -.PHONY: insight+dejagnu.tar -insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb - $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)" - -.PHONY: newlib.tar.bz2 -NEWLIB_SUPPORT_DIRS=libgloss -# taz configures for the sun4 target which won't configure newlib. -# We need newlib configured so that the .info files are made. -# Unfortunately, it is not enough to just configure newlib separately: -# taz will build the .info files but since SUBDIRS won't contain newlib, -# distclean won't be run (leaving Makefile, config.status, and the tmp files -# used in building the .info files, eg: *.def, *.ref). -# The problem isn't solvable however without a lot of extra work because -# target libraries are built in subdir $(target_alias) which gets nuked during -# the make distclean. For now punt on the issue of shipping newlib info files -# with newlib net releases and wait for a day when some native target (sun4?) -# supports newlib (if only minimally). -newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib - $(MAKE) -f Makefile.in taz TOOL=newlib \ - MD5PROG="$(MD5PROG)" \ - SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \ - DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib .NOEXPORT: MAKEOVERRIDES= |