diff options
39 files changed, 3471 insertions, 0 deletions
diff --git a/newlib/ChangeLog b/newlib/ChangeLog index a1c1591..a4fa8ce 100644 --- a/newlib/ChangeLog +++ b/newlib/ChangeLog @@ -1,3 +1,27 @@ +2001-11-12 Hans-Peter Nilsson <hp@bitrange.com> + + * libc/include/machine/ieeefp.h: Add support for mmix target. + * libc/include/machine/setjmp.h: Ditto. + * configure.host: Ditto. + * libc/sys/mmixware/Makefile.am, libc/sys/mmixware/_exit.c, + libc/sys/mmixware/access.c, libc/sys/mmixware/aclocal.m4, + libc/sys/mmixware/chmod.c, libc/sys/mmixware/chown.c, + libc/sys/mmixware/close.c, libc/sys/mmixware/configure.in, + libc/sys/mmixware/creat.c, libc/sys/mmixware/crt0.c, + libc/sys/mmixware/execv.c, libc/sys/mmixware/execve.c, + libc/sys/mmixware/fork.c, libc/sys/mmixware/fstat.c, + libc/sys/mmixware/getpid.c, libc/sys/mmixware/gettime.c, + libc/sys/mmixware/isatty.c, libc/sys/mmixware/kill.c, + libc/sys/mmixware/lseek.c, libc/sys/mmixware/open.c, + libc/sys/mmixware/pipe.c, libc/sys/mmixware/read.c, + libc/sys/mmixware/sbrk.c, libc/sys/mmixware/setjmp.S, + libc/sys/mmixware/stat.c, libc/sys/mmixware/sys/syscall.h, + libc/sys/mmixware/time.c, libc/sys/mmixware/times.c, + libc/sys/mmixware/unlink.c, libc/sys/mmixware/utime.c, + libc/sys/mmixware/wait.c, libc/sys/mmixware/write.c: New files. + * libc/sys/mmixware/configure, libc/sys/mmixware/Makefile.in, + libc/sys/mmixware/aclocal.m4: Generate. + 2001-11-05 Corinna Vinschen <corinna@vinschen.de> * libc/include/sys/unistd.h: Add prototypes for endusershell(), diff --git a/newlib/configure.host b/newlib/configure.host index 0b8b0c0..b04c800 100644 --- a/newlib/configure.host +++ b/newlib/configure.host @@ -125,6 +125,8 @@ case "${host_cpu}" in mips*) machine_dir=mips ;; + mmix) + ;; mn10200) machine_dir=mn10200 ;; @@ -276,6 +278,9 @@ case "${host}" in mips*-dec-*) sys_dir=decstation ;; + mmix-knuth-mmixware) + sys_dir=mmixware + ;; powerpcle-*-pe) sys_dir=cygwin posix_dir=posix @@ -423,6 +428,12 @@ case "${host}" in newlib_cflags="${newlib_cflags}" syscall_dir=syscalls ;; + mmix-*) + syscall_dir=syscalls + # We need every symbol 32-bit aligned, so the invalid + # construct with attribute ((alias ("_ctype_b+127"))) breaks. + newlib_cflags="${newlib_cflags} -DCOMPACT_CTYPE" + ;; mn10?00-*-*) syscall_dir=syscalls ;; diff --git a/newlib/libc/include/machine/ieeefp.h b/newlib/libc/include/machine/ieeefp.h index cc5ced4..42a6cf0 100644 --- a/newlib/libc/include/machine/ieeefp.h +++ b/newlib/libc/include/machine/ieeefp.h @@ -98,6 +98,10 @@ #define __IEEE_BIG_ENDIAN #endif +#ifdef __MMIX__ +#define __IEEE_BIG_ENDIAN +#endif + /* necv70 was __IEEE_LITTLE_ENDIAN. */ #ifdef __W65__ diff --git a/newlib/libc/include/machine/setjmp.h b/newlib/libc/include/machine/setjmp.h index c65c455..0add20f 100644 --- a/newlib/libc/include/machine/setjmp.h +++ b/newlib/libc/include/machine/setjmp.h @@ -145,6 +145,12 @@ typedef int jmp_buf[_JBLEN]; #define _JBLEN 16 #endif +#ifdef __MMIX__ +/* Using a layout compatible with GCC's built-in. */ +#define _JBLEN 5 +#define _JBTYPE unsigned long +#endif + #ifdef _JBLEN #ifdef _JBTYPE typedef _JBTYPE jmp_buf[_JBLEN]; diff --git a/newlib/libc/include/sys/config.h b/newlib/libc/include/sys/config.h index 683e5be..a0741dc 100644 --- a/newlib/libc/include/sys/config.h +++ b/newlib/libc/include/sys/config.h @@ -73,6 +73,10 @@ #define __IEEE_LITTLE_ENDIAN #endif +#ifdef __MMIX__ +#define __IEEE_BIG_ENDIAN +#endif + #ifdef __AVR__ #define _DOUBLE_IS_32BITS #define __SMALL_BITFIELDS diff --git a/newlib/libc/sys/mmixware/Makefile.am b/newlib/libc/sys/mmixware/Makefile.am new file mode 100644 index 0000000..1e4ed31 --- /dev/null +++ b/newlib/libc/sys/mmixware/Makefile.am @@ -0,0 +1,18 @@ +## Process this file with automake to generate Makefile.in + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = _exit.c access.c chmod.c chown.c close.c creat.c \ + execv.c execve.c fork.c fstat.c getpid.c isatty.c \ + kill.c lseek.c open.c pipe.c read.c \ + sbrk.c stat.c time.c unlink.c utime.c wait.c write.c \ + times.c gettime.c setjmp.S + +all: crt0.o + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host diff --git a/newlib/libc/sys/mmixware/Makefile.in b/newlib/libc/sys/mmixware/Makefile.in new file mode 100644 index 0000000..e5ba1b6 --- /dev/null +++ b/newlib/libc/sys/mmixware/Makefile.in @@ -0,0 +1,328 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AR = @AR@ +AS = @AS@ +CC = @CC@ +CPP = @CPP@ +EXEEXT = @EXEEXT@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +VERSION = @VERSION@ +machine_dir = @machine_dir@ +newlib_basedir = @newlib_basedir@ +sys_dir = @sys_dir@ + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = _exit.c access.c chmod.c chown.c close.c creat.c \ + execv.c execve.c fork.c fstat.c getpid.c isatty.c \ + kill.c lseek.c open.c pipe.c read.c \ + sbrk.c stat.c time.c unlink.c utime.c wait.c write.c \ + times.c gettime.c setjmp.S + + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +LIBRARIES = $(noinst_LIBRARIES) + + +DEFS = @DEFS@ -I. -I$(srcdir) +CPPFLAGS = @CPPFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBS = @LIBS@ +lib_a_LIBADD = +lib_a_OBJECTS = _exit.o access.o chmod.o chown.o close.o creat.o \ +execv.o execve.o fork.o fstat.o getpid.o isatty.o kill.o lseek.o open.o \ +pipe.o read.o sbrk.o stat.o time.o unlink.o utime.o wait.o write.o \ +times.o gettime.o setjmp.o +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +SOURCES = $(lib_a_SOURCES) +OBJECTS = $(lib_a_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .o .s +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ + ../../../acinclude.m4 ../../../aclocal.m4 + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +mostlyclean-noinstLIBRARIES: + +clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) + +distclean-noinstLIBRARIES: + +maintainer-clean-noinstLIBRARIES: + +.c.o: + $(COMPILE) -c $< + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) + -rm -f lib.a + $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) + $(RANLIB) lib.a + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + @for file in $(DISTFILES); do \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: +check: check-am +installcheck-am: +installcheck: installcheck-am +install-info-am: +install-info: install-info-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(LIBRARIES) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ + mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ + mostlyclean-am + +clean: clean-am + +distclean-am: distclean-noinstLIBRARIES distclean-compile \ + distclean-tags distclean-generic clean-am + +distclean: distclean-am + -rm -f config.status + +maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ + maintainer-clean-compile maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + -rm -f config.status + +.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ +clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-info-am install-info \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +all: crt0.o + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/newlib/libc/sys/mmixware/_exit.c b/newlib/libc/sys/mmixware/_exit.c new file mode 100644 index 0000000..b528182 --- /dev/null +++ b/newlib/libc/sys/mmixware/_exit.c @@ -0,0 +1,26 @@ +/* _exit for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" + +void _exit (int n) +{ + /* Unfortunately, the return status is not returned by Knuth's mmix + simulator, so it seems in effect ineffective. We set it anyway; + there may be a purpose. */ + __asm__ ("SET $255,%0\n\tTRAP 0,0,0" + : /* No outputs. */ + : "r" (n) + : "memory"); +} diff --git a/newlib/libc/sys/mmixware/access.c b/newlib/libc/sys/mmixware/access.c new file mode 100644 index 0000000..a3cfeac --- /dev/null +++ b/newlib/libc/sys/mmixware/access.c @@ -0,0 +1,41 @@ +/* access for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <fcntl.h> +#include <sys/stat.h> +#include <unistd.h> +#include "sys/syscall.h" +#include <errno.h> + +int +access (const char *fn, int flags) +{ + /* Ugh. We don't have stat (), so we can't copy the other + implementations. Opening a directory as a file usually works, so + let's try and open it and use the openability, regardless of what + kind of test or file it is. */ + long ret; + + /* We'll just assume that if we can open the file for reading, then it's + Z-able, no matter what Z was. */ + ret = TRAP3f (SYS_Fopen, TMPFNO, fn, BinaryRead); + if (ret == 0) + { + /* Yes, this was readable. As in other simulator access functions, + we always return success in this case (though the others check + for directory access). */ + TRAP1f (SYS_Fclose, TMPFNO); + return 0; + } + + errno = EACCES; + return -1; +} diff --git a/newlib/libc/sys/mmixware/aclocal.m4 b/newlib/libc/sys/mmixware/aclocal.m4 new file mode 100644 index 0000000..31ccc38 --- /dev/null +++ b/newlib/libc/sys/mmixware/aclocal.m4 @@ -0,0 +1,291 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4 + +dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +dnl This provides configure definitions used by all the newlib +dnl configure.in files. + +dnl Basic newlib configury. This calls basic introductory stuff, +dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs +dnl configure.host. The only argument is the relative path to the top +dnl newlib directory. + +AC_DEFUN(NEWLIB_CONFIGURE, +[ +dnl Default to --enable-multilib +AC_ARG_ENABLE(multilib, +[ --enable-multilib build many library versions (default)], +[case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; + esac], [multilib=yes])dnl + +dnl Support --enable-target-optspace +AC_ARG_ENABLE(target-optspace, +[ --enable-target-optspace optimize for space], +[case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; + esac], [target_optspace=])dnl + +dnl Support --enable-malloc-debugging - currently only supported for Cygwin +AC_ARG_ENABLE(malloc-debugging, +[ --enable-malloc-debugging indicate malloc debugging requested], +[case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; + esac], [malloc_debugging=])dnl + +dnl Support --enable-newlib-mb +AC_ARG_ENABLE(newlib-mb, +[ --enable-newlib-mb enable multibyte support], +[case "${enableval}" in + yes) newlib_mb=yes ;; + no) newlib_mb=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;; + esac], [newlib_mb=no])dnl + +dnl We may get other options which we don't document: +dnl --with-target-subdir, --with-multisrctop, --with-multisubdir + +test -z "[$]{with_target_subdir}" && with_target_subdir=. + +if test "[$]{srcdir}" = "."; then + if test "[$]{with_target_subdir}" != "."; then + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" + else + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" + fi +else + newlib_basedir="[$]{srcdir}/$1" +fi +AC_SUBST(newlib_basedir) + +AC_CANONICAL_HOST + +AM_INIT_AUTOMAKE(newlib, 1.9.0) + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + +AC_DEFUN(LIB_AC_PROG_CC, +[AC_BEFORE([$0], [AC_PROG_CPP])dnl +AC_CHECK_PROG(CC, gcc, gcc) +if test -z "$CC"; then + AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) + test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) +fi + +AC_PROG_CC_GNU + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +dnl Check whether -g works, even if CFLAGS is set, in case the package +dnl plays around with CFLAGS (such as to build both debugging and +dnl normal versions of a library), tasteless as that idea is. + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + AC_PROG_CC_G + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi +]) + +LIB_AC_PROG_CC + +# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't +# run it explicitly here, it will be run implicitly before +# NEWLIB_CONFIGURE, which doesn't work because that means that it will +# be run before AC_CANONICAL_HOST. +AC_CANONICAL_BUILD + +AC_CHECK_TOOL(AS, as) +AC_CHECK_TOOL(AR, ar) +AC_CHECK_TOOL(RANLIB, ranlib, :) + +AC_PROG_INSTALL + +AM_MAINTAINER_MODE + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +if false; then + AC_EXEEXT +fi + +. [$]{newlib_basedir}/configure.host + +case [$]{newlib_basedir} in +/* | [A-Za-z]:[/\\]*) newlib_flagbasedir=[$]{newlib_basedir} ;; +*) newlib_flagbasedir='[$](top_builddir)/'[$]{newlib_basedir} ;; +esac + +newlib_cflags="[$]{newlib_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{newlib_flagbasedir}/libc/include" +case "${host}" in + *-*-cygwin*) + newlib_cflags="[$]{newlib_cflags} -I[$]{newlib_flagbasedir}/../winsup/cygwin/include -I[$]{newlib_flagbasedir}/../winsup/w32api/include" + ;; +esac + +newlib_cflags="[$]{newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} +AC_SUBST(NEWLIB_CFLAGS) + +AC_SUBST(machine_dir) +AC_SUBST(sys_dir) +]) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN(AM_INIT_AUTOMAKE, +[AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN(AM_SANITY_CHECK, +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN(AM_MISSING_PROG, +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + diff --git a/newlib/libc/sys/mmixware/chmod.c b/newlib/libc/sys/mmixware/chmod.c new file mode 100644 index 0000000..2ff6141 --- /dev/null +++ b/newlib/libc/sys/mmixware/chmod.c @@ -0,0 +1,24 @@ +/* chmod stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +chmod (const char *path, mode_t mode) +{ + UNIMPLEMENTED (("path: %s, mode: %lu", path, (unsigned long) mode)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/chown.c b/newlib/libc/sys/mmixware/chown.c new file mode 100644 index 0000000..6df7c42 --- /dev/null +++ b/newlib/libc/sys/mmixware/chown.c @@ -0,0 +1,24 @@ +/* chown stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +chown (const char *path, short owner, short group) +{ + UNIMPLEMENTED (("path: %s, owner: %d, group: %d", path, owner, group)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/close.c b/newlib/libc/sys/mmixware/close.c new file mode 100644 index 0000000..d2065da --- /dev/null +++ b/newlib/libc/sys/mmixware/close.c @@ -0,0 +1,36 @@ +/* close for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +_close (int file) +{ + if ((unsigned int) file >= N_MMIX_FILEHANDLES + || _MMIX_allocated_filehandle[file] == 0) + { + errno = EBADF; + return -1; + } + + _MMIX_allocated_filehandle[file] = 0; + + if (TRAP1f (SYS_Fclose, file) != 0) + { + errno = EIO; + return -1; + } + return 0; +} diff --git a/newlib/libc/sys/mmixware/configure b/newlib/libc/sys/mmixware/configure new file mode 100755 index 0000000..d26fd3b --- /dev/null +++ b/newlib/libc/sys/mmixware/configure @@ -0,0 +1,1701 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.13 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help + --enable-multilib build many library versions (default)" +ac_help="$ac_help + --enable-target-optspace optimize for space" +ac_help="$ac_help + --enable-malloc-debugging indicate malloc debugging requested" +ac_help="$ac_help + --enable-newlib-mb enable multibyte support" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +sitefile= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.13" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=crt0.c + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi + fi +else + CONFIG_SITE="$sitefile" +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +ac_aux_dir= +for ac_dir in ../../../.. $srcdir/../../../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:580: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +echo "configure:633: checking whether build environment is sane" >&5 +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" 1>&2; exit 1; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { echo "configure: error: newly created file is older than distributed files! +Check your system clock" 1>&2; exit 1; } +fi +rm -f conftest* +echo "$ac_t""yes" 1>&6 +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:690: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:723: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 728 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:739: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:756: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 761 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes + +# Check whether --enable-multilib or --disable-multilib was given. +if test "${enable_multilib+set}" = set; then + enableval="$enable_multilib" + case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;; + esac +else + multilib=yes +fi + +# Check whether --enable-target-optspace or --disable-target-optspace was given. +if test "${enable_target_optspace+set}" = set; then + enableval="$enable_target_optspace" + case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;; + esac +else + target_optspace= +fi + +# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. +if test "${enable_malloc_debugging+set}" = set; then + enableval="$enable_malloc_debugging" + case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;; + esac +else + malloc_debugging= +fi + +# Check whether --enable-newlib-mb or --disable-newlib-mb was given. +if test "${enable_newlib_mb+set}" = set; then + enableval="$enable_newlib_mb" + case "${enableval}" in + yes) newlib_mb=yes ;; + no) newlib_mb=no ;; + *) { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;; + esac +else + newlib_mb=no +fi + + +test -z "${with_target_subdir}" && with_target_subdir=. + +if test "${srcdir}" = "."; then + if test "${with_target_subdir}" != "."; then + newlib_basedir="${srcdir}/${with_multisrctop}../../../.." + else + newlib_basedir="${srcdir}/${with_multisrctop}../../.." + fi +else + newlib_basedir="${srcdir}/../../.." +fi + + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:854: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + + + +PACKAGE=newlib + +VERSION=1.9.0 + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi +cat >> confdefs.h <<EOF +#define PACKAGE "$PACKAGE" +EOF + +cat >> confdefs.h <<EOF +#define VERSION "$VERSION" +EOF + + + +missing_dir=`cd $ac_aux_dir && pwd` +echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 +echo "configure:895: checking for working aclocal" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal + echo "$ac_t""found" 1>&6 +else + ACLOCAL="$missing_dir/missing aclocal" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +echo "configure:908: checking for working autoconf" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$ac_t""found" 1>&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working automake""... $ac_c" 1>&6 +echo "configure:921: checking for working automake" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake + echo "$ac_t""found" 1>&6 +else + AUTOMAKE="$missing_dir/missing automake" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +echo "configure:934: checking for working autoheader" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$ac_t""found" 1>&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +echo "configure:947: checking for working makeinfo" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$ac_t""found" 1>&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$ac_t""missing" 1>&6 +fi + + + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:972: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1002: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1051: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <<EOF +#ifdef __GNUC__ + yes; +#endif +EOF +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1075: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + + +# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't +# run it explicitly here, it will be run implicitly before +# NEWLIB_CONFIGURE, which doesn't work because that means that it will +# be run before AC_CANONICAL_HOST. +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:1108: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + + +# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1129: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_AS="${ac_tool_prefix}as" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as" +fi +fi +AS="$ac_cv_prog_AS" +if test -n "$AS"; then + echo "$ac_t""$AS" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + + +# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1161: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar" +fi +fi +AR="$ac_cv_prog_AR" +if test -n "$AR"; then + echo "$ac_t""$AR" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + + +# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1193: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +if test -z "$ac_cv_prog_RANLIB"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1225: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +else + RANLIB=":" +fi +fi + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:1270: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:1324: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +if false; then + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:1358: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:1368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi + +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT + +fi + +. ${newlib_basedir}/configure.host + +case ${newlib_basedir} in +/* | A-Za-z:/\\*) newlib_flagbasedir=${newlib_basedir} ;; +*) newlib_flagbasedir='$(top_builddir)/'${newlib_basedir} ;; +esac + +newlib_cflags="${newlib_cflags} -I"'$(top_builddir)'"/../../../targ-include -I${newlib_flagbasedir}/libc/include" +case "${host}" in + *-*-cygwin*) + newlib_cflags="${newlib_cflags} -I${newlib_flagbasedir}/../winsup/cygwin/include -I${newlib_flagbasedir}/../winsup/w32api/include" + ;; +esac + +newlib_cflags="${newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} + + + + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS <<EOF +#! /bin/sh +# Generated automatically by configure. +# Run this file to recreate the current configuration. +# This directory was configured as follows, +# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.13" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS <<EOF + +# Protect against being on the right side of a sed subst in config.status. +sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@newlib_basedir@%$newlib_basedir%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@PACKAGE@%$PACKAGE%g +s%@VERSION@%$VERSION%g +s%@ACLOCAL@%$ACLOCAL%g +s%@AUTOCONF@%$AUTOCONF%g +s%@AUTOMAKE@%$AUTOMAKE%g +s%@AUTOHEADER@%$AUTOHEADER%g +s%@MAKEINFO@%$MAKEINFO%g +s%@SET_MAKE@%$SET_MAKE%g +s%@CC@%$CC%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@AS@%$AS%g +s%@AR@%$AR%g +s%@RANLIB@%$RANLIB%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g +s%@EXEEXT@%$EXEEXT%g +s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g +s%@machine_dir@%$machine_dir%g +s%@sys_dir@%$sys_dir%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <<EOF + +CONFIG_FILES=\${CONFIG_FILES-"Makefile"} +EOF +cat >> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF +cat >> $CONFIG_STATUS <<EOF + +EOF +cat >> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/newlib/libc/sys/mmixware/configure.in b/newlib/libc/sys/mmixware/configure.in new file mode 100644 index 0000000..b9fa988 --- /dev/null +++ b/newlib/libc/sys/mmixware/configure.in @@ -0,0 +1,12 @@ +dnl This is the newlib/libc/sys/mmixware configure.in file. +dnl Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.5) +AC_INIT(crt0.c) + +dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. +AC_CONFIG_AUX_DIR(../../../..) + +NEWLIB_CONFIGURE(../../..) + +AC_OUTPUT(Makefile) diff --git a/newlib/libc/sys/mmixware/creat.c b/newlib/libc/sys/mmixware/creat.c new file mode 100644 index 0000000..5555f18 --- /dev/null +++ b/newlib/libc/sys/mmixware/creat.c @@ -0,0 +1,25 @@ +/* creat for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +creat (const char *path, + /* We can't set the mode, so we have to ignore it. */ + mode_t mode) +{ + return open (path, O_CREAT|O_WRONLY|O_TRUNC); +} diff --git a/newlib/libc/sys/mmixware/crt0.c b/newlib/libc/sys/mmixware/crt0.c new file mode 100644 index 0000000..d39ff43 --- /dev/null +++ b/newlib/libc/sys/mmixware/crt0.c @@ -0,0 +1,16 @@ +/* crt0 stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +/* At present this is just a placeholder, to be filled in, if the need + arises. The main init contents is in gcc/config/mmix/crti.asm. + + I think this file is not allowed to be empty. So here goes: */ +extern int _Dummy; diff --git a/newlib/libc/sys/mmixware/execv.c b/newlib/libc/sys/mmixware/execv.c new file mode 100644 index 0000000..6bbe50a --- /dev/null +++ b/newlib/libc/sys/mmixware/execv.c @@ -0,0 +1,24 @@ +/* execv stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +execv (const char *path, char *const argv[]) +{ + UNIMPLEMENTED (("path: %s, argv: %p", path, argv)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/execve.c b/newlib/libc/sys/mmixware/execve.c new file mode 100644 index 0000000..2456a3d --- /dev/null +++ b/newlib/libc/sys/mmixware/execve.c @@ -0,0 +1,24 @@ +/* execve stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +_execve (const char *path, char *const argv[], char *const envp[]) +{ + UNIMPLEMENTED (("path: %s, argv: %p, envp: %p", path, argv, envp)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/fork.c b/newlib/libc/sys/mmixware/fork.c new file mode 100644 index 0000000..e09d664 --- /dev/null +++ b/newlib/libc/sys/mmixware/fork.c @@ -0,0 +1,24 @@ +/* fork stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +_fork () +{ + UNIMPLEMENTED (("")); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/fstat.c b/newlib/libc/sys/mmixware/fstat.c new file mode 100644 index 0000000..aeec860 --- /dev/null +++ b/newlib/libc/sys/mmixware/fstat.c @@ -0,0 +1,24 @@ +/* fstat for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" + +int +_fstat (int file, + struct stat *st) +{ + st->st_mode = S_IFCHR; + st->st_blksize = 4096; + return 0; +} diff --git a/newlib/libc/sys/mmixware/getpid.c b/newlib/libc/sys/mmixware/getpid.c new file mode 100644 index 0000000..9146361 --- /dev/null +++ b/newlib/libc/sys/mmixware/getpid.c @@ -0,0 +1,20 @@ +/* getpid stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" + +_getpid (n) +{ + return 1; +} diff --git a/newlib/libc/sys/mmixware/gettime.c b/newlib/libc/sys/mmixware/gettime.c new file mode 100644 index 0000000..d067150 --- /dev/null +++ b/newlib/libc/sys/mmixware/gettime.c @@ -0,0 +1,25 @@ +/* gettime stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include "sys/time.h" +#include <errno.h> + +int +_gettimeofday (struct timeval *tp, void *tzp) +{ + UNIMPLEMENTED (("timeval: %p, tzp: %p", tp, tzp)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/isatty.c b/newlib/libc/sys/mmixware/isatty.c new file mode 100644 index 0000000..54647f6 --- /dev/null +++ b/newlib/libc/sys/mmixware/isatty.c @@ -0,0 +1,21 @@ +/* isatty for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" + +isatty (fd) + int fd; +{ + return fd == 0 || fd == 1 || fd == 2; +} diff --git a/newlib/libc/sys/mmixware/kill.c b/newlib/libc/sys/mmixware/kill.c new file mode 100644 index 0000000..2c4373b --- /dev/null +++ b/newlib/libc/sys/mmixware/kill.c @@ -0,0 +1,26 @@ +/* kill for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +_kill (n, m) +{ + if (n == 1) + return TRAP1i (SYS_halt, 0); + + errno = EPERM; + return -1; +} + diff --git a/newlib/libc/sys/mmixware/lseek.c b/newlib/libc/sys/mmixware/lseek.c new file mode 100644 index 0000000..9405dd2 --- /dev/null +++ b/newlib/libc/sys/mmixware/lseek.c @@ -0,0 +1,61 @@ +/* lseek for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/unistd.h> +#include "sys/syscall.h" +#include <errno.h> + +off_t +_lseek (int file, + off_t ptr, + int dir) +{ + off_t simoff = dir == SEEK_END ? -(ptr + 1) : ptr; + long ret; + + if ((unsigned int) file >= 32 || _MMIX_allocated_filehandle[file] == 0) + { + errno = EBADF; + return -1; + } + + if (dir == SEEK_CUR) + { + long curpos = TRAP2f (SYS_Ftell, file, 0); + + if (curpos == -1) + { + errno = EIO; + return -1; + } + + ptr += (off_t) curpos; + } + + ret = TRAP2f (SYS_Fseek, file, simoff); + if (ret == -1) + { + return -1; + errno = EIO; + } + + ret = TRAP2f (SYS_Ftell, file, 0); + if (ret == -1) + { + errno = EIO; + return -1; + } + + return ret; +} diff --git a/newlib/libc/sys/mmixware/open.c b/newlib/libc/sys/mmixware/open.c new file mode 100644 index 0000000..ec0d222 --- /dev/null +++ b/newlib/libc/sys/mmixware/open.c @@ -0,0 +1,106 @@ +/* open for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <fcntl.h> +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +/* Let's keep the filehandle array here, since this is a primary + initializer of it. */ +unsigned char _MMIX_allocated_filehandle[32] = + { + 1, + 1, + 1, + 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 + }; + +int +_open (const char *path, + int flags, ...) +{ + long fileno; + unsigned char mode; + long fffile = 0; + long ret; + + for (fileno = 0; + fileno < (sizeof (_MMIX_allocated_filehandle) / + sizeof (_MMIX_allocated_filehandle[0])); + fileno++) + if (_MMIX_allocated_filehandle[fileno] == 0) + break; + + if (fileno == (sizeof (_MMIX_allocated_filehandle) / + sizeof (_MMIX_allocated_filehandle[0]))) + { + errno = EMFILE; + return -1; + } + + /* We map this to a fopen call. The flags parameter is stymied because + we don't support more other than these flags. */ + if (flags & ~(O_RDONLY | O_WRONLY | O_RDWR | O_CREAT | O_APPEND | O_TRUNC)) + { + UNIMPLEMENTED (("path: %s, flags: %d", path, flags)); + errno = ENOSYS; + return -1; + } + + if ((flags & O_ACCMODE) == O_RDONLY) + mode = BinaryRead; + else if ((flags & (O_WRONLY | O_APPEND)) == (O_WRONLY | O_APPEND)) + { + mode = BinaryReadWrite; + fffile = 1; + } + else if ((flags & (O_RDWR | O_APPEND)) == (O_RDWR | O_APPEND)) + { + mode = BinaryReadWrite; + fffile = 1; + } + else if ((flags & (O_WRONLY | O_CREAT)) == (O_WRONLY | O_CREAT) + || (flags & (O_WRONLY | O_TRUNC)) == (O_WRONLY | O_TRUNC)) + mode = BinaryWrite; + else if ((flags & (O_RDWR | O_CREAT)) == (O_RDWR | O_CREAT)) + mode = BinaryReadWrite; + else if (flags & O_RDWR) + mode = BinaryReadWrite; + else + { + errno = EINVAL; + return -1; + } + + ret = TRAP3f (SYS_Fopen, fileno, path, mode); + if (ret < 0) + { + /* It's totally unknown what the error was. We'll just take our + chances and assume ENOENT. */ + errno = ENOENT; + return -1; + } + + _MMIX_allocated_filehandle[fileno] = 1; + + if (fffile) + { + TRAP2f (SYS_Fseek, fileno, -1); + } + + return fileno; +} diff --git a/newlib/libc/sys/mmixware/pipe.c b/newlib/libc/sys/mmixware/pipe.c new file mode 100644 index 0000000..76be534 --- /dev/null +++ b/newlib/libc/sys/mmixware/pipe.c @@ -0,0 +1,24 @@ +/* pipe stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +pipe (int *fd) +{ + UNIMPLEMENTED (("fd: %p", fd)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/read.c b/newlib/libc/sys/mmixware/read.c new file mode 100644 index 0000000..b474b80 --- /dev/null +++ b/newlib/libc/sys/mmixware/read.c @@ -0,0 +1,49 @@ +/* read for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +_read (int file, + char *ptr, + size_t len) +{ + long ret; + + if ((unsigned int) file >= 32 || _MMIX_allocated_filehandle[file] == 0) + { + errno = EBADF; + return -1; + } + + ret = TRAP3f (SYS_Fread, file, ptr, len); + + /* Map the return codes: + -1-len: an error. We return -1. + 0: success. We return len. + n-len: end-of-file after n chars read. We return n. */ + if (ret == 0) + return len; + + if (ret == -1 - (long) len) + { + /* We don't know the nature of the failure, so this is an + approximation. */ + errno = EIO; + return -1; + } + + return ret + len; +} diff --git a/newlib/libc/sys/mmixware/sbrk.c b/newlib/libc/sys/mmixware/sbrk.c new file mode 100644 index 0000000..5d25612 --- /dev/null +++ b/newlib/libc/sys/mmixware/sbrk.c @@ -0,0 +1,41 @@ +/* sbrk for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" + +extern char *_Sbrk_high; + +/* When the program is loaded, the first location in Pool_Segment holds + the first available octabyte in the memory pool (a.k.a. the heap); + somewhere after the command-line parameters. We don't have to + initialize that location, we can just use it straight up as a pointer; + just point the symbol there. + + This file will be compiled with -no-builtin-syms, so we need to define + Pool_Segment and any other symbols that would be predefined in mmixal. */ + +__asm__ (" .global _Sbrk_high\n" + "_Sbrk_high IS Pool_Segment\n" + "Pool_Segment IS 0x40<<56"); + +caddr_t +_sbrk (size_t incr) +{ + extern char end; /* Defined by the linker */ + char *prev_heap_end; + + prev_heap_end = _Sbrk_high; + _Sbrk_high += incr; + return (caddr_t) prev_heap_end; +} diff --git a/newlib/libc/sys/mmixware/setjmp.S b/newlib/libc/sys/mmixware/setjmp.S new file mode 100644 index 0000000..e5f0431 --- /dev/null +++ b/newlib/libc/sys/mmixware/setjmp.S @@ -0,0 +1,85 @@ +/* Setjmp and longjmp for mmix. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. + + jmp_buf[5]: + 0: fp + 1: rJ (return-address) + 2: sp + 3: rO *before* the setjmp call. + 4: temporary storage. Reserved between setjmp and longjmp. */ + +#ifdef __MMIX_ABI_GNU__ +#define arg1 $231 +#define arg2 $232 +#define outret $231 +#define popval 0 +#else +#define arg1 $0 +#define arg2 $1 +#define outret $0 +#define popval 1 +#endif + + .section .text.setjmp,"ax",@progbits + .global setjmp +setjmp: +% Store fp, sp and return address. Recycle the static-chain and +% structure-return registers as temporary register, since we need to keep +% the jmp_buf (parameter 1) and the return address across a "POP". + SET $251,arg1 + STOU $253,$251,0 + GET $252,rJ + STOU $252,$251,8 + STOU $254,$251,16 + SETL outret,0 + +% Jump through hoops to get the value of rO *before* the setjmp call. + GETA $255,0f + PUT rJ,$255 + POP popval,0 +0: + GET $255,rO + STOU $255,$251,24 + GO $255,$252,0 + .size setjmp,.-setjmp + + .section .text.longjmp,"ax",@progbits + .global longjmp +longjmp: +% Reset arg2 to 1 if it is 0 (see longjmp(2)) and store it in jmp_buf. +% Save arg1 in a global register, since it will be destroyed by the POPs +% (in the mmixware ABI). + CSZ arg2,arg2,1 + STOU arg2,arg1,32 + SET $251,arg1 + +% Loop and "POP 0,0" until rO is the expected value, like +% the expansion of nonlocal_goto_receiver, except that we put the return +% value in the right register and make sure that the POP causes it to +% enter the right return-value register as seen by the caller. For the +% GNU ABI, it is unnecessary to do this in the loop and perhaps the memory +% access can be hoisted outside the loop, but this is safe and simple and +% I see no need to optimize longjmps. + GETA $255,0f + PUT rJ,$255 + LDOU $255,$251,24 +0: + GET $252,rO + CMPU $252,$252,$255 + BNP $252,1f + LDOU outret,$251,32 + POP popval,0 +1: + LDOU $253,$251,0 + LDOU $255,$251,8 + LDOU $254,$251,16 + GO $255,$255,0 + .size longjmp,.-longjmp diff --git a/newlib/libc/sys/mmixware/stat.c b/newlib/libc/sys/mmixware/stat.c new file mode 100644 index 0000000..5dd1b24 --- /dev/null +++ b/newlib/libc/sys/mmixware/stat.c @@ -0,0 +1,25 @@ +/* stat stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +_stat (const char *path, struct stat *st) + +{ + UNIMPLEMENTED (("path: %s, st: %p", path, st)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/syscall.h b/newlib/libc/sys/mmixware/syscall.h new file mode 100644 index 0000000..e639ba2 --- /dev/null +++ b/newlib/libc/sys/mmixware/syscall.h @@ -0,0 +1,138 @@ +/* syscall defines for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +/* These are the mmixware simulator calls that are of use in newlib. */ + +#define SYS_halt 0 +#define SYS_Fopen 1 +#define SYS_Fclose 2 +#define SYS_Fread 3 +#define SYS_Fwrite 6 +#define SYS_Fseek 9 +#define SYS_Ftell 10 + + +enum MMIX_filemode + { + TextRead = 0, + TextWrite = 1, + BinaryRead = 2, + BinaryWrite = 3, + BinaryReadWrite = 4 + }; + +#define N_MMIX_FILEHANDLES 32 + +/* We store a bitmap of allocated filehandles + _MMIX_allocated_filehandle[fileno] in an array. There are 32 of them. + Indexes 0, 1 and 2 are allocated from start. The reason we keep track + of them is that *we* have to allocate a filehandle when opening a file. + Had we got a filehandle from the simulator, we wouldn't have to keep + track of it. A value of 0 denotes a free handle. */ +extern unsigned char _MMIX_allocated_filehandle[N_MMIX_FILEHANDLES]; + +/* We use this file-handle number as a temporary; not used by usual file + I/O. */ +#define TMPFNO 127 + +/* Simulator call with one argument. Also used for zero-argument calls; + pass a zero as ARG1. */ +#define TRAP1i(FUN, ARG1) \ + ({ long ret_; \ + __asm__ ("TRAP 0,%1,%2\n\tSET %0,$255" \ + : "=r" (ret_) : "i" (FUN), "i" (ARG1) \ + : "memory"); \ + ret_; \ + }) + +/* Helper macros to cope with the file-handle parameter to the simulator + being *constant*. We support up to 32 simultaneously open files. */ +#define I3f(FUN, ARG1, N, ARGS) \ + if (ARG1 == N) \ + __asm__ ("SET $255,%3\n\tTRAP 0,%1,%2\n\tSET %0,$255" \ + : "=r" (ret_) : "i" (FUN), "i" (N), "r" (ARGS) \ + : "memory") + +/* Using if:s rather than switches to help GCC optimize the rest away. */ +#define DO32(FUN, ARG1, ARGS) \ + I3f (FUN, ARG1, 0, ARGS); \ + else I3f (FUN, ARG1, 1, ARGS); \ + else I3f (FUN, ARG1, 2, ARGS); \ + else I3f (FUN, ARG1, 3, ARGS); \ + else I3f (FUN, ARG1, 4, ARGS); \ + else I3f (FUN, ARG1, 5, ARGS); \ + else I3f (FUN, ARG1, 6, ARGS); \ + else I3f (FUN, ARG1, 7, ARGS); \ + else I3f (FUN, ARG1, 8, ARGS); \ + else I3f (FUN, ARG1, 9, ARGS); \ + else I3f (FUN, ARG1, 10, ARGS); \ + else I3f (FUN, ARG1, 11, ARGS); \ + else I3f (FUN, ARG1, 12, ARGS); \ + else I3f (FUN, ARG1, 13, ARGS); \ + else I3f (FUN, ARG1, 14, ARGS); \ + else I3f (FUN, ARG1, 15, ARGS); \ + else I3f (FUN, ARG1, 16, ARGS); \ + else I3f (FUN, ARG1, 17, ARGS); \ + else I3f (FUN, ARG1, 18, ARGS); \ + else I3f (FUN, ARG1, 19, ARGS); \ + else I3f (FUN, ARG1, 20, ARGS); \ + else I3f (FUN, ARG1, 21, ARGS); \ + else I3f (FUN, ARG1, 22, ARGS); \ + else I3f (FUN, ARG1, 23, ARGS); \ + else I3f (FUN, ARG1, 24, ARGS); \ + else I3f (FUN, ARG1, 25, ARGS); \ + else I3f (FUN, ARG1, 26, ARGS); \ + else I3f (FUN, ARG1, 27, ARGS); \ + else I3f (FUN, ARG1, 28, ARGS); \ + else I3f (FUN, ARG1, 29, ARGS); \ + else I3f (FUN, ARG1, 30, ARGS); \ + else I3f (FUN, ARG1, 31, ARGS); \ + else \ + { \ + errno = EBADF; \ + return -1; \ + } + +#define TRAP1f(FUN, ARG1) \ + ({ long ret_; \ + DO32 (FUN, ARG1, 0); \ + ret_; \ + }) + +#define TRAP2f(FUN, ARG1, ARG2) \ + ({ long ret_; \ + DO32 (FUN, ARG1, ARG2); \ + ret_; \ + }) + +#define TRAP3f(FUN, ARG1, ARG2, ARG3) \ + ({ long ret_; \ + unsigned long args_[] \ + = { (unsigned long) (ARG2), (unsigned long) (ARG3) }; \ + DO32 (FUN, ARG1, args_); \ + ret_; \ + }) + +#ifndef __GNUC__ +/* Probably will not happen. Nevertheless... */ +# define UNIMPLEMENTED(MSG) +#else +# define UNIMPLEMENTED(MSG) UNIMPLEMENTEDi MSG +# define UNIMPLEMENTEDi(MSG, ARGS...) \ + do { \ + char buf[2000]; \ + sprintf (buf, "UNIMPLEMENTED %s in %s\n", __FUNCTION__, __FILE__); \ + write (2, buf, strlen (buf)); \ + sprintf (buf, MSG , ##ARGS); \ + write (2, buf, strlen (buf)); \ + write (2, "\n", 1); \ + } while (0) +#endif diff --git a/newlib/libc/sys/mmixware/time.c b/newlib/libc/sys/mmixware/time.c new file mode 100644 index 0000000..56d2de5 --- /dev/null +++ b/newlib/libc/sys/mmixware/time.c @@ -0,0 +1,28 @@ +/* time stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" + +time_t +time (time_t *tloc) +{ + /* Nowhere to get time reasonably from; neither of rC, rI and rU seems + usable without assuming some scaling of mems and oops to real time. */ + time_t thetime = 0; + + if (tloc) + *tloc = thetime; + + return thetime; +} diff --git a/newlib/libc/sys/mmixware/times.c b/newlib/libc/sys/mmixware/times.c new file mode 100644 index 0000000..c44dd48 --- /dev/null +++ b/newlib/libc/sys/mmixware/times.c @@ -0,0 +1,23 @@ +/* times stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include "sys/times.h" + +clock_t +times (struct tms *buffer) +{ + memset (buffer, 0, sizeof (*buffer)); + return 0; +} diff --git a/newlib/libc/sys/mmixware/unlink.c b/newlib/libc/sys/mmixware/unlink.c new file mode 100644 index 0000000..c4ac738 --- /dev/null +++ b/newlib/libc/sys/mmixware/unlink.c @@ -0,0 +1,21 @@ +/* unlink stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" + +int +_unlink () +{ + return -1; +} diff --git a/newlib/libc/sys/mmixware/utime.c b/newlib/libc/sys/mmixware/utime.c new file mode 100644 index 0000000..8c6d25d --- /dev/null +++ b/newlib/libc/sys/mmixware/utime.c @@ -0,0 +1,26 @@ +/* utime stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +utime (path, times) + const char *path; + char *times; +{ + UNIMPLEMENTED (("path: %s, times: %p", path, times)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/wait.c b/newlib/libc/sys/mmixware/wait.c new file mode 100644 index 0000000..69c677f --- /dev/null +++ b/newlib/libc/sys/mmixware/wait.c @@ -0,0 +1,25 @@ +/* wait stub for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +_wait (statusp) + int *statusp; +{ + UNIMPLEMENTED (("statusp: %p", statusp)); + errno = ENOSYS; + return -1; +} diff --git a/newlib/libc/sys/mmixware/write.c b/newlib/libc/sys/mmixware/write.c new file mode 100644 index 0000000..492eafa --- /dev/null +++ b/newlib/libc/sys/mmixware/write.c @@ -0,0 +1,40 @@ +/* write for MMIXware. + + Copyright (C) 2001 Hans-Peter Nilsson. + + Permission to use, copy, modify, and distribute this software is freely + granted, provided that this notice is preserved with no changes. + THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. */ + +#include <_ansi.h> +#include <sys/types.h> +#include <sys/stat.h> +#include "sys/syscall.h" +#include <errno.h> + +int +_write ( int file, + char *ptr, + size_t len) +{ + long ret; + + if ((unsigned int) file >= 32 || _MMIX_allocated_filehandle[file] == 0) + { + errno = EBADF; + return -1; + } + + ret = TRAP3f (SYS_Fwrite, file, ptr, len); + + if (ret < 0) + { + errno = EIO; + return -1; + } + + return len; +} |