diff options
| -rw-r--r-- | ChangeLog | 6 | ||||
| -rw-r--r-- | config/ChangeLog | 4 | ||||
| -rw-r--r-- | config/gxx-include-dir.m4 | 26 | ||||
| -rwxr-xr-x | configure | 83 | ||||
| -rw-r--r-- | configure.in | 20 |
5 files changed, 79 insertions, 60 deletions
@@ -1,5 +1,11 @@ 2004-12-03 Richard Sandiford <rsandifo@redhat.com> + * configure.in: Include config/gxx-include-dir.m4. Use + TL_AC_GXX_INCLUDE_DIR. Remove some now-redundant AC_SUBSTs. + * configure: Regenerate. + +2004-12-03 Richard Sandiford <rsandifo@redhat.com> + * config.if: Delete. * configure.in: Set libstdcxx_incdir directly. * configure: Regenerate. diff --git a/config/ChangeLog b/config/ChangeLog index dd64c45..49cbfdd 100644 --- a/config/ChangeLog +++ b/config/ChangeLog @@ -1,3 +1,7 @@ +2004-12-03 Richard Sandiford <rsandifo@redhat.com> + + * gxx-include-dir.m4: New file. + 2004-12-02 Richard Sandiford <rsandifo@redhat.com> * gcc-version.m4: New file. diff --git a/config/gxx-include-dir.m4 b/config/gxx-include-dir.m4 new file mode 100644 index 0000000..87a65ad --- /dev/null +++ b/config/gxx-include-dir.m4 @@ -0,0 +1,26 @@ +dnl Usage: TL_AC_GXX_INCLUDE_DIR +dnl +dnl Set $gxx_include_dir to the location of the installed C++ include +dnl directory. The value depends on $gcc_version and the configuration +dnl options --with-gxx-include-dir and --enable-version-specific-runtime-libs. +dnl +dnl If you change the default here, you'll need to change the gcc and +dnl libstdc++-v3 subdirectories too. +AC_DEFUN([TL_AC_GXX_INCLUDE_DIR], +[ +case "${with_gxx_include_dir}" in + yes) + AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory]) + ;; + no | "") + case "${enable_version_specific_runtime_libs}" in + yes) gxx_include_dir='${libsubdir}/include/c++' ;; + *) + libstdcxx_incdir=c++/${gcc_version} + gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;; + esac ;; + *) gxx_include_dir=${with_gxx_include_dir} ;; +esac +AC_SUBST(gxx_include_dir) +AC_SUBST(libstdcxx_incdir) +]) @@ -3376,9 +3376,7 @@ fi target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}" # provide a proper gxx_include_dir. -# Note, if you change the default, make sure to fix both here and in -# the gcc and libstdc++-v3 subdirectories. -# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given. + case "${with_gxx_include_dir}" in yes) { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; } @@ -3388,11 +3386,14 @@ case "${with_gxx_include_dir}" in yes) gxx_include_dir='${libsubdir}/include/c++' ;; *) libstdcxx_incdir=c++/${gcc_version} - gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;; + gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;; esac ;; *) gxx_include_dir=${with_gxx_include_dir} ;; esac + + + FLAGS_FOR_TARGET= case " $target_configdirs " in *" newlib "*) @@ -3568,8 +3569,6 @@ done - - # Build module lists & subconfigure args. @@ -3596,7 +3595,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3600: checking for $ac_word" >&5 +echo "configure:3599: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3629,7 +3628,7 @@ if test -z "$ac_cv_prog_AR" ; then # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3633: checking for $ac_word" >&5 +echo "configure:3632: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3668,7 +3667,7 @@ fi # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3672: checking for $ac_word" >&5 +echo "configure:3671: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3701,7 +3700,7 @@ if test -z "$ac_cv_prog_AS" ; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3705: checking for $ac_word" >&5 +echo "configure:3704: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3740,7 +3739,7 @@ fi # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3744: checking for $ac_word" >&5 +echo "configure:3743: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3773,7 +3772,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3777: checking for $ac_word" >&5 +echo "configure:3776: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3812,7 +3811,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3816: checking for $ac_word" >&5 +echo "configure:3815: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3845,7 +3844,7 @@ if test -z "$ac_cv_prog_LD" ; then # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3849: checking for $ac_word" >&5 +echo "configure:3848: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3884,7 +3883,7 @@ fi # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3888: checking for $ac_word" >&5 +echo "configure:3887: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3917,7 +3916,7 @@ if test -z "$ac_cv_prog_NM" ; then # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3921: checking for $ac_word" >&5 +echo "configure:3920: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3956,7 +3955,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3960: checking for $ac_word" >&5 +echo "configure:3959: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3989,7 +3988,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3993: checking for $ac_word" >&5 +echo "configure:3992: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4028,7 +4027,7 @@ fi # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4032: checking for $ac_word" >&5 +echo "configure:4031: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4061,7 +4060,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4065: checking for $ac_word" >&5 +echo "configure:4064: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4100,7 +4099,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args. set dummy ${ncn_tool_prefix}objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4104: checking for $ac_word" >&5 +echo "configure:4103: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4133,7 +4132,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then # Extract the first word of "objcopy", so it can be a program name with args. set dummy objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4137: checking for $ac_word" >&5 +echo "configure:4136: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4172,7 +4171,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args. set dummy ${ncn_tool_prefix}objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4176: checking for $ac_word" >&5 +echo "configure:4175: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4205,7 +4204,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4209: checking for $ac_word" >&5 +echo "configure:4208: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4251,7 +4250,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4255: checking for $ac_word" >&5 +echo "configure:4254: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4284,7 +4283,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4288: checking for $ac_word" >&5 +echo "configure:4287: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4323,7 +4322,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4327: checking for $ac_word" >&5 +echo "configure:4326: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4356,7 +4355,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4360: checking for $ac_word" >&5 +echo "configure:4359: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4395,7 +4394,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4399: checking for $ac_word" >&5 +echo "configure:4398: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4428,7 +4427,7 @@ if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4432: checking for $ac_word" >&5 +echo "configure:4431: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4467,7 +4466,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4471: checking for $ac_word" >&5 +echo "configure:4470: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4500,7 +4499,7 @@ if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4504: checking for $ac_word" >&5 +echo "configure:4503: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4539,7 +4538,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4543: checking for $ac_word" >&5 +echo "configure:4542: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4572,7 +4571,7 @@ if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4576: checking for $ac_word" >&5 +echo "configure:4575: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4611,7 +4610,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4615: checking for $ac_word" >&5 +echo "configure:4614: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4644,7 +4643,7 @@ if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4648: checking for $ac_word" >&5 +echo "configure:4647: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4683,7 +4682,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4687: checking for $ac_word" >&5 +echo "configure:4686: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4716,7 +4715,7 @@ if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4720: checking for $ac_word" >&5 +echo "configure:4719: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4801,7 +4800,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4805: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4804: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4848,7 +4847,7 @@ esac # gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not # possible, however, we can resort to mv. echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6 -echo "configure:4852: checking if symbolic links between directories work" >&5 +echo "configure:4851: checking if symbolic links between directories work" >&5 if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5104,6 +5103,8 @@ s%@bootstrap_lean@%$bootstrap_lean%g s%@default_target@%$default_target%g /@serialization_dependencies@/r $serialization_dependencies s%@serialization_dependencies@%%g +s%@gxx_include_dir@%$gxx_include_dir%g +s%@libstdcxx_incdir@%$libstdcxx_incdir%g /@host_makefile_frag@/r $host_makefile_frag s%@host_makefile_frag@%%g /@target_makefile_frag@/r $target_makefile_frag @@ -5119,8 +5120,6 @@ s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g s%@tooldir@%$tooldir%g s%@build_tooldir@%$build_tooldir%g s%@GDB_TK@%$GDB_TK%g -s%@gxx_include_dir@%$gxx_include_dir%g -s%@libstdcxx_incdir@%$libstdcxx_incdir%g s%@build_configargs@%$build_configargs%g s%@build_configdirs@%$build_configdirs%g s%@host_configargs@%$host_configargs%g diff --git a/configure.in b/configure.in index 587bf92..dd9834c 100644 --- a/configure.in +++ b/configure.in @@ -20,6 +20,7 @@ sinclude(config/acx.m4) sinclude(config/gcc-version.m4) +sinclude(config/gxx-include-dir.m4) AC_INIT(move-if-change) AC_PREREQ(2.13) @@ -1963,22 +1964,7 @@ fi target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}" # provide a proper gxx_include_dir. -# Note, if you change the default, make sure to fix both here and in -# the gcc and libstdc++-v3 subdirectories. -# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given. -case "${with_gxx_include_dir}" in - yes) - AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory]) - ;; - no | "") - case "${enable_version_specific_runtime_libs}" in - yes) gxx_include_dir='${libsubdir}/include/c++' ;; - *) - libstdcxx_incdir=c++/${gcc_version} - gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;; - esac ;; - *) gxx_include_dir=${with_gxx_include_dir} ;; -esac +TL_AC_GXX_INCLUDE_DIR FLAGS_FOR_TARGET= case " $target_configdirs " in @@ -2154,8 +2140,6 @@ AC_SUBST(BUILD_PREFIX_1) AC_SUBST(tooldir) AC_SUBST(build_tooldir) AC_SUBST(GDB_TK) -AC_SUBST(gxx_include_dir) -AC_SUBST(libstdcxx_incdir) # Build module lists & subconfigure args. AC_SUBST(build_configargs) |