2002-10-02 Nathanael Nerode <neroden@gcc.gnu.org>

	* Makefile.tpl: Remove material now in src-release.  (Finally!)
	* Makefile.in: Regenerate.

1 files changed, 0 insertions, 287 deletions

diff --git a/Makefile.in b/Makefile.in
index d807d97..0121ad8 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -124,9 +124,6 @@ NM = nm
 
 LD = ld
 
-BZIPPROG = bzip2
-MD5PROG = md5sum
-
 # These values are substituted by configure.
 DEFAULT_YACC = @DEFAULT_YACC@
 DEFAULT_LEX = @DEFAULT_LEX@
@@ -1807,290 +1804,6 @@ Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
 	$(SHELL) ./config.status
 
 #
-# Support for building net releases
-
-# Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
-	config.guess config.if config.sub config move-if-change \
-	mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
-	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
-	mkinstalldirs ltconfig ltmain.sh missing ylwrap \
-	libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
-
-# Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
-	make-stds.texi standards.info* configure.texi configure.info* \
-	configbuild.* configdev.*
-
-
-# When you use `make setup-dirs' or `make taz' you should always redefine
-# this macro.
-SUPPORT_FILES = list-of-support-files-for-tool-in-question
-
-# NOTE: No double quotes in the below.  It is used within shell script
-# as VER="$(VER)"
-VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
-	  sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
-	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
-	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
-	elif test -f $(TOOL)/version.in; then \
-	  head -1 $(TOOL)/version.in; \
-	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
-	  sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
-	else \
-	  echo VERSION; \
-	fi`
-PACKAGE = $(TOOL)
-
-.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	$(MAKE) -f Makefile.in do-proto-toplev \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-md5sum \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-tar \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-bz2 \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-tar
-gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	$(MAKE) -f Makefile.in do-proto-toplev \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-md5sum \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-djunpack \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-tar \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-taz
-gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	$(MAKE) -f Makefile.in gdb-tar \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-bz2 \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: do-proto-toplev
-do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	echo "==> Making $(PACKAGE)-$(VER)/"
-	# Take out texinfo from a few places.
-	sed -e '/^all\.normal: /s/\all-texinfo //' \
-	    -e '/^	install-texinfo /d' \
-	<Makefile.in >tmp
-	mv -f tmp Makefile.in
-	#
-	./configure sun4
-	[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
-	  || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
-	    ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
-	    CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
-	# Make links, and run "make diststuff" or "make info" when needed.
-	rm -rf proto-toplev ; mkdir proto-toplev
-	set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
-	for d in $$dirs ; do \
-	  if [ -d $$d ]; then \
-	    if [ ! -f $$d/Makefile ] ; then true ; \
-	    elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
-		(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
-	    elif grep '^info:' $$d/Makefile >/dev/null ; then \
-	        (cd $$d ; $(MAKE) info ) || exit 1 ; \
-	    fi ; \
-	    if [ -d $$d/proto-$$d.dir ]; then \
-	      ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
-	    else \
-	      ln -s ../$$d proto-toplev/$$d ; \
-	    fi ; \
-	  else ln -s ../$$d proto-toplev/$$d ; fi ; \
-	done
-	cd etc && $(MAKE) info
-	$(MAKE) distclean
-	#
-	mkdir proto-toplev/etc
-	(cd proto-toplev/etc; \
-	 for i in $(ETC_SUPPORT); do \
-		ln -s ../../etc/$$i . ; \
-	 done)
-	#
-	# Take out texinfo from configurable dirs
-	rm proto-toplev/configure.in
-	sed -e '/^host_tools=/s/texinfo //' \
-	    <configure.in >proto-toplev/configure.in
-	#
-	mkdir proto-toplev/texinfo
-	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/
-	if test -r texinfo/util/tex3patch ; then \
-	  mkdir proto-toplev/texinfo/util && \
-	  ln -s ../../../texinfo/util/tex3patch	proto-toplev/texinfo/util ; \
-	else true; fi
-	chmod -R og=u . || chmod og=u `find . -print`
-	#
-	# Create .gmo files from .po files.
-	for f in `find . -name '*.po' -type f -print`; do \
-	     msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
-	done
-	#
-	-rm -f $(PACKAGE)-$(VER)
-	ln -s proto-toplev $(PACKAGE)-$(VER)
-
-.PHONY: do-tar
-do-tar:
-	echo "==> Making $(PACKAGE)-$(VER).tar"
-	-rm -f $(PACKAGE)-$(VER).tar
-	find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
-		| tar cTfh - $(PACKAGE)-$(VER).tar
-
-.PHONY: do-bz2
-do-bz2:
-	echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
-	-rm -f $(PACKAGE)-$(VER).tar.bz2
-	$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
-
-.PHONY: do-md5sum
-do-md5sum:
-	echo "==> Adding md5 checksum to top-level directory"
-	cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
-		| xargs $(MD5PROG) > ../md5.sum
-	mv md5.sum proto-toplev
-
-.PHONY: do-djunpack
-do-djunpack:
-	echo "==> Adding updated djunpack.bat to top-level directory"
-	echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
-	sed < djunpack.bat > djunpack.new \
-		-e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
-	mv djunpack.new djunpack.bat
-	-rm -f proto-toplev/djunpack.bat
-	ln -s ../djunpack.bat proto-toplev/djunpack.bat
-
-TEXINFO_SUPPORT= texinfo/texinfo.tex
-DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-
-.PHONY: gas.tar.bz2
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
-gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
-	$(MAKE) -f Makefile.in taz TOOL=gas \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
-
-# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
-binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
-	$(MAKE) -f Makefile.in taz TOOL=binutils \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
-
-.PHONY: gas+binutils.tar.bz2
-GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
-	$(MAKE) -f Makefile.in taz TOOL=gas \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-
-GNATS_SUPPORT_DIRS=include libiberty send-pr
-gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
-	$(MAKE) -f  Makefile.in taz TOOL=gnats \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
-
-.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
-gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: gdb.tar
-gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-
-DEJAGNU_SUPPORT_DIRS=  tcl expect libiberty
-.PHONY: dejagnu.tar.bz2
-dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
-	$(MAKE) -f Makefile.in taz TOOL=dejagnu \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
-
-.PHONY: gdb+dejagnu.tar.bz2
-GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
-gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-.PHONY: gdb+dejagnu.tar
-gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-
-.PHONY: insight.tar.bz2
-INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
-insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-.PHONY: insight.tar
-insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-
-.PHONY: insight+dejagnu.tar.bz2
-INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
-insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-.PHONY: insight+dejagnu.tar
-insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
-	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-
-.PHONY: newlib.tar.bz2
-NEWLIB_SUPPORT_DIRS=libgloss
-# taz configures for the sun4 target which won't configure newlib.
-# We need newlib configured so that the .info files are made.
-# Unfortunately, it is not enough to just configure newlib separately:
-# taz will build the .info files but since SUBDIRS won't contain newlib,
-# distclean won't be run (leaving Makefile, config.status, and the tmp files
-# used in building the .info files, eg: *.def, *.ref).
-# The problem isn't solvable however without a lot of extra work because
-# target libraries are built in subdir $(target_alias) which gets nuked during
-# the make distclean.  For now punt on the issue of shipping newlib info files
-# with newlib net releases and wait for a day when some native target (sun4?)
-# supports newlib (if only minimally).
-newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
-	$(MAKE) -f Makefile.in taz TOOL=newlib \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
-		DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
 
 .NOEXPORT:
 MAKEOVERRIDES=