| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The truncation was causing the sorting algorithm to behave oddly when comparing
positive and negative offsets. Fortunately, this doesn't currently happen in
practice and was exposed by a WIP. Thus, I can't test this change now, but the
follow on patch will.
llvm-svn: 263255
|
|
http://reviews.llvm.org/D17967
llvm-svn: 263021
|
|
Differential Revision: http://reviews.llvm.org/D17868
llvm-svn: 262774
|
|
These parameters aren't expected to be null, so take them by reference.
llvm-svn: 262151
|
|
Take MachineInstr by reference instead of by pointer in SlotIndexes and
the SlotIndex wrappers in LiveIntervals. The MachineInstrs here are
never null, so this cleans up the API a bit. It also incidentally
removes a few implicit conversions from MachineInstrBundleIterator to
MachineInstr* (see PR26753).
At a couple of call sites it was convenient to convert to a range-based
for loop over MachineBasicBlock::instr_begin/instr_end, so I added
MachineBasicBlock::instrs.
llvm-svn: 262115
|
|
llvm-svn: 258364
|
|
llvm-svn: 258363
|
|
Note that this is disabled by default and still requires a patch to
handleMove() which is not upstreamed yet.
If the TrackLaneMasks policy/strategy is enabled the MachineScheduler
will build a schedule graph where definitions of independent
subregisters are no longer serialised.
Implementation comments:
- Without lane mask tracking a sub register def also counts as a use
(except for the first one with the read-undef flag set), with lane
mask tracking enabled this is no longer the case.
- Pressure Diffs where previously maintained per definition of a
vreg with the help of the SSA information contained in the
LiveIntervals. With lanemask tracking enabled we cannot do this
anymore and instead change the pressure diffs for all uses of the vreg
as it becomes live/dead. For this changed style to work correctly we
ignore uses of instructions that define the same register again: They
won't affect register pressure.
- With lanemask tracking we remove all read-undef flags from
sub register defs when building the graph and re-add them later when
all vreg lanes have become dead.
Differential Revision: http://reviews.llvm.org/D14969
llvm-svn: 258259
|
|
Differential Revision: http://reviews.llvm.org/D14968
llvm-svn: 258258
|
|
increase
Summary:
This patch adds a function called getRegPressureSetScore() to
TargetRegisterInfo. The MachineScheduler uses this when comparing
instruction that increase the register pressure of different sets
to determine which set is safer to increase.
This hook is useful for GPU targets where the number of registers in the
class is not the best metric for determing which presser set is safer to
increase.
Future work may include adding more parameters to this function, like
for example, the current pressure level of the set or the amount that
the pressure will be increased/decreased.
Reviewers: qcolombet, escha, arsenm, atrick, MatzeB
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14806
llvm-svn: 255795
|
|
llvm-svn: 253097
|
|
When there is only 1 node left in the ready queue and it is picked call
the reason "ONLY1" instead of "NOCAND".
llvm-svn: 253096
|
|
llvm-svn: 252340
|
|
ScheduleDAGInstrs doesn't behave differently before or after register
allocation. It was only used in a method of MachineSchedulerBase which
behaved differently in MachineScheduler/PostMachineScheduler. Change
this to let MachineScheduler/PostMachineScheduler just pass in a
parameter to that function.
The order of the LiveIntervals* and bool RemoveKillFlags paramters have
been switched to make out-of-tree code fail instead of unintentionally
passing a value intended for the IsPostRA flag to the (previously
following and default initialized) RemoveKillFlags.
Differential Revision: http://reviews.llvm.org/D14245
llvm-svn: 251883
|
|
It broke 3 arm testcases.
This reverts commit r251608.
llvm-svn: 251615
|
|
Maybe I just missed the humor there ;-)
llvm-svn: 251609
|
|
This was a layering violation in ScheduleDAGInstrs (and
MachineSchedulerBase) they both shouldn't know directly whether they are
used by the PostMachineScheduler or the MachineScheduler.
llvm-svn: 251608
|
|
llvm-svn: 251607
|
|
r248010 changed the -debug output to use short ids, but did not
similarly modify the graph printer. Change to be consistent, for ease of
cross-reference.
llvm-svn: 251465
|
|
llvm-svn: 251037
|
|
llvm-svn: 249884
|
|
At least...a little bit.
llvm-svn: 248020
|
|
LiveInRegs/LiveOutRegs from RegisterPressure to PressureTracker"
This reverts commit r247943.
Accidental commit, code review was not finished yet.
llvm-svn: 247945
|
|
PressureTracker
Differential Revision: http://reviews.llvm.org/D12814
llvm-svn: 247943
|
|
default
llvm-svn: 247942
|
|
with the new pass manager, and no longer relying on analysis groups.
This builds essentially a ground-up new AA infrastructure stack for
LLVM. The core ideas are the same that are used throughout the new pass
manager: type erased polymorphism and direct composition. The design is
as follows:
- FunctionAAResults is a type-erasing alias analysis results aggregation
interface to walk a single query across a range of results from
different alias analyses. Currently this is function-specific as we
always assume that aliasing queries are *within* a function.
- AAResultBase is a CRTP utility providing stub implementations of
various parts of the alias analysis result concept, notably in several
cases in terms of other more general parts of the interface. This can
be used to implement only a narrow part of the interface rather than
the entire interface. This isn't really ideal, this logic should be
hoisted into FunctionAAResults as currently it will cause
a significant amount of redundant work, but it faithfully models the
behavior of the prior infrastructure.
- All the alias analysis passes are ported to be wrapper passes for the
legacy PM and new-style analysis passes for the new PM with a shared
result object. In some cases (most notably CFL), this is an extremely
naive approach that we should revisit when we can specialize for the
new pass manager.
- BasicAA has been restructured to reflect that it is much more
fundamentally a function analysis because it uses dominator trees and
loop info that need to be constructed for each function.
All of the references to getting alias analysis results have been
updated to use the new aggregation interface. All the preservation and
other pass management code has been updated accordingly.
The way the FunctionAAResultsWrapperPass works is to detect the
available alias analyses when run, and add them to the results object.
This means that we should be able to continue to respect when various
passes are added to the pipeline, for example adding CFL or adding TBAA
passes should just cause their results to be available and to get folded
into this. The exception to this rule is BasicAA which really needs to
be a function pass due to using dominator trees and loop info. As
a consequence, the FunctionAAResultsWrapperPass directly depends on
BasicAA and always includes it in the aggregation.
This has significant implications for preserving analyses. Generally,
most passes shouldn't bother preserving FunctionAAResultsWrapperPass
because rebuilding the results just updates the set of known AA passes.
The exception to this rule are LoopPass instances which need to preserve
all the function analyses that the loop pass manager will end up
needing. This means preserving both BasicAAWrapperPass and the
aggregating FunctionAAResultsWrapperPass.
Now, when preserving an alias analysis, you do so by directly preserving
that analysis. This is only necessary for non-immutable-pass-provided
alias analyses though, and there are only three of interest: BasicAA,
GlobalsAA (formerly GlobalsModRef), and SCEVAA. Usually BasicAA is
preserved when needed because it (like DominatorTree and LoopInfo) is
marked as a CFG-only pass. I've expanded GlobalsAA into the preserved
set everywhere we previously were preserving all of AliasAnalysis, and
I've added SCEVAA in the intersection of that with where we preserve
SCEV itself.
One significant challenge to all of this is that the CGSCC passes were
actually using the alias analysis implementations by taking advantage of
a pretty amazing set of loop holes in the old pass manager's analysis
management code which allowed analysis groups to slide through in many
cases. Moving away from analysis groups makes this problem much more
obvious. To fix it, I've leveraged the flexibility the design of the new
PM components provides to just directly construct the relevant alias
analyses for the relevant functions in the IPO passes that need them.
This is a bit hacky, but should go away with the new pass manager, and
is already in many ways cleaner than the prior state.
Another significant challenge is that various facilities of the old
alias analysis infrastructure just don't fit any more. The most
significant of these is the alias analysis 'counter' pass. That pass
relied on the ability to snoop on AA queries at different points in the
analysis group chain. Instead, I'm planning to build printing
functionality directly into the aggregation layer. I've not included
that in this patch merely to keep it smaller.
Note that all of this needs a nearly complete rewrite of the AA
documentation. I'm planning to do that, but I'd like to make sure the
new design settles, and to flesh out a bit more of what it looks like in
the new pass manager first.
Differential Revision: http://reviews.llvm.org/D12080
llvm-svn: 247167
|
|
llvm-svn: 245379
|
|
Before creating a schedule edge to encourage MacroOpFusion check that:
- The predecessor actually writes a register that the branch reads.
- The predecessor has no successors in the ScheduleDAG so we can
schedule it in front of the branch.
This avoids skewing the scheduling heuristic in cases where macroop
fusion cannot happen.
Differential Revision: http://reviews.llvm.org/D10745
llvm-svn: 242723
|
|
Apparently, the style needs to be agreed upon first.
llvm-svn: 240390
|
|
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
|
|
llvm-svn: 240112
|
|
Summary:
TargetInstrInfo::getLdStBaseRegImmOfs to
TargetInstrInfo::getMemOpBaseRegImmOfs and implement for x86. The
implementation only handles a few easy cases now and will be made more
sophisticated in the future.
This is NFCI: the only user of `getLdStBaseRegImmOfs` (now
`getmemOpBaseRegImmOfs`) is `LoadClusterMotion` and `LoadClusterMotion`
is disabled for x86.
Reviewers: reames, ab, MatzeB, atrick
Reviewed By: MatzeB, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10199
llvm-svn: 239741
|
|
enablePostRAScheduler()
r213101 changed the behaviour of this method to not only affect the
PostMachineScheduler scheduler but also the PostRAScheduler scheduler,
renaming should make this fact clear. Also document that the preferred
way is to specify this in the scheduling model instead of overriding
this method.
Differential Revision: http://reviews.llvm.org/D10427
llvm-svn: 239659
|
|
llvm-svn: 237545
|
|
llvm-svn: 237544
|
|
"Fix the MachineScheduler's logic for updating ready times for in-order.
Now the scheduler updates a node's ready time as soon as it is
scheduled, before releasing dependent nodes."
This fix was only made in one variant of the ScheduleDAGMI driver.
Francois de Ferriere reported the issue in the other bit of code where
it was also needed.
I never got around to coming up with a test case, but it's an
obvious fix that shouldn't be delayed any longer.
I'll try to refactor this code a little better.
I did verify performance on a wide variety of targets and saw no
negative impact with this fix.
llvm-svn: 233366
|
|
that control, individually, all of the disparate things it was
controlling.
At the same time move a FIXME in the Hexagon port to a new
subtarget function that will enable a user of the machine
scheduler to avoid using the source scheduler for pre-RA-scheduling.
The FIXME would have this removed, but involves either testcase
changes or adding -pre-RA-sched=source to a few testcases.
llvm-svn: 231980
|
|
llvm-svn: 227173
|
|
source and dest are local
This fixes PR21792.
Differential Revision: http://reviews.llvm.org/D6823
llvm-svn: 226433
|
|
options.
This commit changes the command line arguments (PassInfo::PassArgument) of two
passes, MachineFunctionPrinter and MachineScheduler, to avoid collisions with
command line options that have the same argument strings.
This bug manifests when the PassList construct (defined in opt.cpp) is used
in a tool that links with codegen passes. To reproduce the bug, paste the
following lines into llc.cpp and run llc.
#include "llvm/IR/LegacyPassNameParser.h"
static llvm::cl::list<const llvm::PassInfo*, bool, llvm::PassNameParser>
PassList(llvm::cl::desc("Optimizations available:"));
rdar://problem/19212448
llvm-svn: 224186
|
|
with/without -g."
This reapplies r224118 with a fix for test 'misched-code-difference-with-debug.ll'.
That test was failing on some buildbots because it was x86 specific but it was
missing a target triple.
Added an explicit triple to test misched-code-difference-with-debug.ll.
llvm-svn: 224126
|
|
with/without -g.
Test 'misched-code-difference-with-debug.ll' was failing on some buildbots.
llvm-svn: 224121
|
|
with/without -g.
This patch fixes the issue reported as PR21807. There was a minor difference
in the generated code depending on the -g flag.
The cause was that with -g the machine scheduler used a different
scheduling strategy. This decision was based on the number of instructions
in a schedule region and included debug instructions in that count.
This patch fixes the issue in MISched and provides a test.
Patch by Russell Gallop!
llvm-svn: 224118
|
|
scheduler or via the SelectionDAG if available. Otherwise
grab the subtarget off of the MachineFunction by going up
the parent chain.
llvm-svn: 219666
|
|
Fixes a logic error in the MachineScheduler found by Steve Montgomery (and
confirmed by Andy). This has gone unfixed for months because the fix has been
found to introduce some small performance regressions. However, Andy has
recommended that, at this point, we fix this to avoid further dependence on the
incorrect behavior (and then follow-up separately on any regressions), and I
agree.
Fixes PR18883.
llvm-svn: 219512
|
|
llvm-svn: 215153
|
|
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
llvm-svn: 214838
|
|
information and update all callers. No functional change.
llvm-svn: 214781
|
|
This reverts commit r212109, which reverted r212088.
However, disable the assert as it's not necessary for correctness. There are
several corner cases that the assert needed to handle better for in-order
scheduling, but none of them are incorrect scheduler behavior. The assert is
mainly there to collect good unit tests like this and ensure that the
target-independent scheduler is working as expected with the various machine
models.
llvm-svn: 212187
|
|
This macro is sometimes defined manually but isn't (and doesn't need to be) in
llvm-config.h so shouldn't appear in the headers, likewise NDEBUG.
Instead switch them over to LLVM_DUMP_METHOD on the definitions.
llvm-svn: 212130
|
