| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Summary:
emit vector info of traceback table.
Reviewers: Jason Liu,Hubert Tong
Differential Revision: https://reviews.llvm.org/D93659
|
|
variadic debug values"
Rewrites test to use correct architecture triple; fixes incorrect
reference in SourceLevelDebugging doc; simplifies `spillReg` behaviour
so as to not be dependent on changes elsewhere in the patch stack.
This reverts commit d2000b45d033c06dc7973f59909a0ad12887ff51.
|
|
variadic debug values"
This reverts commit d07f106f4a48b6e941266525b6f7177834d7b74e.
|
|
values
This patch adds a new instruction that can represent variadic debug values,
DBG_VALUE_VAR. This patch alone covers the addition of the instruction and a set
of basic code changes in MachineInstr and a few adjacent areas, but does not
correctly handle variadic debug values outside of these areas, nor does it
generate them at any point.
The new instruction is similar to the existing DBG_VALUE instruction, with the
following differences: the operands are in a different order, any number of
values may be used in the instruction following the Variable and Expression
operands (these are referred to in code as “debug operands”) and are indexed
from 0 so that getDebugOperand(X) == getOperand(X+2), and the Expression in a
DBG_VALUE_VAR must use the DW_OP_LLVM_arg operator to pass arguments into the
expression.
The new DW_OP_LLVM_arg operator is only valid in expressions appearing in a
DBG_VALUE_VAR; it takes a single argument and pushes the debug operand at the
index given by the argument onto the Expression stack. For example the
sub-expression `DW_OP_LLVM_arg, 0` has the meaning “Push the debug operand at
index 0 onto the expression stack.”
Differential Revision: https://reviews.llvm.org/D82363
|
|
|
|
|
|
|
|
|
|
The last use of the function was removed on Oct 20, 2018 in commit
8d6ff4c0af843e1a61b76d89812aed91e358de34.
|
|
|
|
Differential Revision: https://reviews.llvm.org/D90327
|
|
Following on from this RFC[0] from a while back, this is the first patch towards
implementing variadic debug values.
This patch specifically adds a set of functions to MachineInstr for performing
operations specific to debug values, and replacing uses of the more general
functions where appropriate. The most prevalent of these is replacing
getOperand(0) with getDebugOperand(0) for debug-value-specific code, as the
operands corresponding to values will no longer be at index 0, but index 2 and
upwards: getDebugOperand(x) == getOperand(x+2). Similar replacements have been
added for the other operands, along with some helper functions to replace
oft-repeated code and operate on a variable number of value operands.
[0] http://lists.llvm.org/pipermail/llvm-dev/2020-February/139376.html<Paste>
Differential Revision: https://reviews.llvm.org/D81852
|
|
|
|
Reverting because this is causing failures on bots with expensive checks
enabled.
This reverts commit 73cea83a6f5ab521edf3cccfc603534776d691ec.
|
|
When optimising for code size at the expense of performance, it is often
worth saving and restoring some of r0-r3, if IPRA will be able to take
advantage of them. This doesn't cost any extra code size if we already
have a PUSH/POP pair, and increases the number of available registers
across any calls to the function.
We already have an optimisation which tries fold the subtract/add of the
SP into the PUSH/POP by using extra registers, which somewhat conflicts
with this. I've made the new optimisation less aggressive in cases where
the existing one is likely to trigger, which gives better results than
either of these optimisations by themselves.
Differential revision: https://reviews.llvm.org/D69936
|
|
|
|
llvm::Register as started by r367614. NFC
llvm-svn: 367633
|
|
test64rr)
Peephole opt has a one use limitation which appears to be accidental. The function being used was incorrectly documented as returning whether the def had one *user*, but instead returned true only when there was one *use*. Add a corresponding hasOneNonDbgUser helper, and adjust peephole-opt to use the appropriate one.
All of the actual folding code handles multiple uses within a single instruction. That codepath is well exercised through instruction selection.
Differential Revision: https://reviews.llvm.org/D63656
llvm-svn: 364336
|
|
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
|
|
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
|
|
Change of approach, it looks like it's a much better idea to deal with
the vregs that have LLTs and reg classes both properly, than trying to
avoid creating those across all GlobalISel passes and all targets.
The change mostly touches MachineRegisterInfo::constrainRegClass,
which is apparently only used by MachineCSE. The changes are NFC for
any pipeline but one that contains MachineCSE mid-GlobalISel.
NOTE on isCallerPreservedOrConstPhysReg change in MachineCSE:
There is no test covering it as the only way to insert a new pass
(MachineCSE) from a command line I know of is llc's -run-pass option,
which only works with MIR, but MIRParser freezes reserved registers upon
MachineFunctions creation, making it impossible to reproduce the state
that exposes the issue.
Reviwed By: aditya_nandakumar
Differential Revision: https://reviews.llvm.org/D53144
llvm-svn: 344822
|
|
them in a pre-legalize combiner for AArch64
Summary: Depends on D45541
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, javed.absar, aemerson
Subscribers: aemerson, rengolin, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45543
The previous commit failed portions of the test-suite on GreenDragon due to
duplicate COPY instructions and iterator invalidation. Both issues have now
been fixed. To assist with this, a helper (cloneVirtualRegister) has been added
to MachineRegisterInfo that can be used to get another register that has the same
type and class/bank as an existing one.
llvm-svn: 343654
|
|
sed -Ei 's/[[:space:]]+$//' include/**/*.{def,h,td} lib/**/*.{cpp,h}
llvm-svn: 338293
|
|
by replacing DenseMap with IndexedMap for LLTs within MRI, as
benchmarked by cross-compiling sqlite3 amalgamation for AArch64
on x86 machine.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D46809
llvm-svn: 333125
|
|
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
|
|
createGenericVirtualRegister.
llvm-svn: 329076
|
|
llvm-svn: 328887
|
|
Right now, it is not possible to run MachineCSE in the middle of the
GlobalISel pipeline. Being able to run generic optimizations between the
core passes of GlobalISel was one of the goals of the new ISel framework.
This is the first attempt to do it.
The problem is that MachineCSE pass assumes all register operands have a
register class, which, in GlobalISel context, won't be true until after the
InstructionSelect pass. The reason for this behaviour is that before
replacing one virtual register with another, MachineCSE pass (and most of
the other optimization machine passes) must check if the virtual registers'
constraints have a (sufficiently large) intersection, and constrain the
resulting register appropriately if such intersection exists.
GlobalISel extends the representation of such constraints from just a
register class to a triple (low-level type, register bank, register
class).
This commit adds MachineRegisterInfo::constrainRegAttrs method that extends
MachineRegisterInfo::constrainRegClass to such a triple.
The idea is that going forward we should use:
- RegisterBankInfo::constrainGenericRegister within GlobalISel's
InstructionSelect pass
- MachineRegisterInfo::constrainRegClass within SelectionDAG ISel
- MachineRegisterInfo::constrainRegAttrs everywhere else regardless
the target and instruction selector it uses.
Patch by Roman Tereshin. Thanks!
llvm-svn: 322805
|
|
The Function can never be nullptr so we can return a reference.
llvm-svn: 320884
|
|
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
llvm-svn: 319168
|
|
The instructions addis,addi, bl are used to calculate the address of TLS thread
local variables. These TLS access code sequences are generated repeatedly every
time the thread local variable is accessed. By communicating to Machine CSE that
X2 is guaranteed to have the same value within the same function call (so called
Caller Preserved Physical Register), the redundant TLS access code sequences are
cleaned up.
Differential Revision: https://reviews.llvm.org/D39173
llvm-svn: 318661
|
|
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
|
|
Summary:
Use use_nodbg_empty() rather than use_empty() in
MachineRegisterInfo::EmitLiveInCopies() when determining if a livein
register has any uses or not. Otherwise a single dbg.value can make us
generate different code, meaning -g would affect code generation.
Found when compiling code for my out-of-tree target. Unfortunately I
haven't been able to reproduce the problem on X86 or any of the other
in-tree targets that I tried, so no test case.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39044
llvm-svn: 318382
|
|
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
|
|
causing link errors for several people.
Error LNK2019 unresolved external symbol "public: void __cdecl `anonymous namespace'::MatchableInfo::dump(void)const " (?dump@MatchableInfo@?A0xf4f1c304@@QEBAXXZ) referenced in function "public: void __cdecl `anonymous namespace'::AsmMatcherEmitter::run(class llvm::raw_ostream &)" (?run@AsmMatcherEmitter@?A0xf4f1c304@@QEAAXAEAVraw_ostream@llvm@@@Z) llvm-tblgen D:\llvm\2017\utils\TableGen\AsmMatcherEmitter.obj 1
llvm-svn: 315854
|
|
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
|
|
A register in CodeGen can be marked as reserved: In that case we
consider the register always live and do not use (or rather ignore)
kill/dead/undef operand flags.
LiveIntervalAnalysis however tracks liveness per register unit (not per
register). We already needed adjustments for this in r292871 to deal
with super/sub registers. However I did not look at aliased register
there. Looking at ARM:
FPSCR (regunits FPSCR, FPSCR~FPSCR_NZCV) aliases with FPSCR_NZCV
(regunits FPSCR_NZCV, FPSCR~FPSCR_NZCV) hence they share a register unit
(FPSCR~FPSCR_NZCV) that represents the aliased parts of the registers.
This shared register unit was previously considered non-reserved,
however given that we uses of the reserved FPSCR potentially violate
some rules (like uses without defs) we should make FPSCR~FPSCR_NZCV
reserved too and stop tracking liveness for it.
This patch:
- Defines a register unit as reserved when: At least for one root
register, the root register and all its super registers are reserved.
- Adjust LiveIntervals::computeRegUnitRange() for new reserved
definition.
- Add MachineRegisterInfo::isReservedRegUnit() to have a canonical way
of testing.
- Stop computing LiveRanges for reserved register units in HMEditor even
with UpdateFlags enabled.
- Skip verification of uses of reserved reg units in the machine
verifier (this usually didn't happen because there would be no cached
liverange but there is no guarantee for that and I would run into this
case before the HMEditor tweak, so may as well fix the verifier too).
Note that this should only affect ARMs FPSCR/FPSCR_NZCV registers today;
aliased registers are rarely used, the only other cases are hexagons
P0-P3/P3_0 and C8/USR pairs which are not mixing reserved/non-reserved
registers in an alias.
Differential Revision: https://reviews.llvm.org/D37356
llvm-svn: 312348
|
|
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
|
|
The MIR printer dumps a string that describe the register mask of a function.
A static predefined list of register masks matches a static list of strings.
However when the register mask is not from the static predefined list, there is no descriptor string and the printer fails.
This patch adds support to custom register mask printing and dumping.
Also the list of callee saved registers (describing the registers that must be preserved for the caller) might be dynamic.
As such this data needs to be dumped and parsed back to the Machine Register Info.
Differential Revision: https://reviews.llvm.org/D30971
llvm-svn: 298207
|
|
llvm-svn: 297932
|
|
llvm-svn: 297729
|
|
Each Calling convention (CC) defines a static list of registers that should be preserved by a callee function. All other registers should be saved by the caller.
Some CCs use additional condition: If the register is used for passing/returning arguments – the caller needs to save it - even if it is part of the Callee Saved Registers (CSR) list.
The current LLVM implementation doesn’t support it. It will save a register if it is part of the static CSR list and will not care if the register is passed/returned by the callee.
The solution is to dynamically allocate the CSR lists (Only for these CCs). The lists will be updated with actual registers that should be saved by the callee.
Since we need the allocated lists to live as long as the function exists, the list should reside inside the Machine Register Info (MRI) which is a property of the Machine Function and managed by it (and has the same life span).
The lists should be saved in the MRI and populated upon LowerCall and LowerFormalArguments.
The patch will also assist to implement future no_caller_saved_regsiters attribute intended for interrupt handler CC.
Differential Revision: https://reviews.llvm.org/D28566
llvm-svn: 297715
|
|
other minor fixes (NFC).
llvm-svn: 295499
|
|
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
|
|
After instruction selection we perform some checks on each VReg just before
discarding the type information. These checks were assertions before, but that
breaks the fallback path so this patch moves the logic into the main flow and
reports a better error on failure.
llvm-svn: 286289
|
|
llvm-svn: 285423
|
|
llvm-svn: 283851
|
|
This should fix the fallout of r283848.
llvm-svn: 283850
|
|
This changes MachineRegisterInfo to be initializes after parsing all
instructions. This is in preparation for upcoming commits that allow the
register class specification on the operand or deduce them from the
MCInstrDesc.
This commit removes the unused feature of having nonsequential register
numbers. This was confusing anyway as the vreg numbers would be
different after parsing when you had "holes" in your numbering.
This patch also introduces the concept of an incomplete virtual
register. An incomplete virtual register may be used during .mir parsing
to construct MachineOperands without knowing the exact register class
(or register bank) yet.
NFC except for some error messages.
Differential Revision: https://reviews.llvm.org/D22397
llvm-svn: 283848
|
|
Summary:
The current implementation of isConstantPhysReg() checks for defs of
physical registers to determine if they are constant. Some
architectures (e.g. AArch64 XZR/WZR) have registers that are constant
and may be used as destinations to indicate the generated value is
discarded, preventing isConstantPhysReg() from returning true. This
change adds a TargetRegisterInfo hook that overrides the no defs check
for cases such as this.
Reviewers: MatzeB, qcolombet, t.p.northover, jmolloy
Subscribers: junbuml, aemerson, mcrosier, rengolin
Differential Revision: https://reviews.llvm.org/D24570
llvm-svn: 282543
|
