From 0bede41cf38dc8d3b4d611e31900d5d6cff6c06c Mon Sep 17 00:00:00 2001 From: Carlos O'Donell Date: Wed, 22 Jul 2020 23:28:05 -0400 Subject: Update libc.pot for 2.32 release. --- po/libc.pot | 1733 +++++++++++++++++++++++++---------------------------------- 1 file changed, 731 insertions(+), 1002 deletions(-) (limited to 'po') diff --git a/po/libc.pot b/po/libc.pot index c6bb32e..0d430e4 100644 --- a/po/libc.pot +++ b/po/libc.pot @@ -5,8 +5,8 @@ #, fuzzy msgid "" msgstr "" -"Project-Id-Version: libc 2.30.9000\n" -"POT-Creation-Date: 2020-01-02 20:08+0530\n" +"Project-Id-Version: libc 2.31.9000\n" +"POT-Creation-Date: 2020-07-22 23:24-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -66,7 +66,8 @@ msgid "Give a short usage message" msgstr "" #: argp/argp-parse.c:103 catgets/gencat.c:109 catgets/gencat.c:113 -#: iconv/iconv_prog.c:60 iconv/iconv_prog.c:61 nscd/nscd.c:105 nss/makedb.c:120 +#: iconv/iconv_prog.c:61 iconv/iconv_prog.c:62 nscd/nscd.c:107 nscd/nscd.c:111 +#: nss/makedb.c:120 msgid "NAME" msgstr "" @@ -138,10 +139,10 @@ msgid "" "[OUTPUT-FILE [INPUT-FILE]...]" msgstr "" -#: catgets/gencat.c:229 debug/pcprofiledump.c:209 elf/ldconfig.c:308 -#: elf/pldd.c:247 elf/sln.c:77 elf/sprof.c:372 iconv/iconv_prog.c:405 +#: catgets/gencat.c:229 debug/pcprofiledump.c:209 elf/ldconfig.c:306 +#: elf/pldd.c:247 elf/sln.c:77 elf/sprof.c:372 iconv/iconv_prog.c:388 #: iconv/iconvconfig.c:379 locale/programs/locale.c:276 -#: locale/programs/localedef.c:437 login/programs/pt_chown.c:89 +#: locale/programs/localedef.c:438 login/programs/pt_chown.c:89 #: malloc/memusagestat.c:563 nss/getent.c:953 nss/makedb.c:369 #: posix/getconf.c:503 sysdeps/unix/sysv/linux/lddlibc4.c:61 #, c-format @@ -151,11 +152,11 @@ msgid "" msgstr "" #: catgets/gencat.c:245 debug/pcprofiledump.c:225 debug/xtrace.sh:64 -#: elf/ldconfig.c:324 elf/ldd.bash.in:38 elf/pldd.c:263 elf/sotruss.sh:75 -#: elf/sprof.c:389 iconv/iconv_prog.c:422 iconv/iconvconfig.c:396 -#: locale/programs/locale.c:293 locale/programs/localedef.c:463 +#: elf/ldconfig.c:322 elf/ldd.bash.in:38 elf/pldd.c:263 elf/sotruss.sh:75 +#: elf/sprof.c:389 iconv/iconv_prog.c:405 iconv/iconvconfig.c:396 +#: locale/programs/locale.c:293 locale/programs/localedef.c:460 #: login/programs/pt_chown.c:63 malloc/memusage.sh:71 malloc/memusagestat.c:581 -#: nscd/nscd.c:509 nss/getent.c:88 nss/makedb.c:385 posix/getconf.c:485 +#: nscd/nscd.c:522 nss/getent.c:88 nss/makedb.c:385 posix/getconf.c:485 #: sysdeps/unix/sysv/linux/lddlibc4.c:68 #, c-format msgid "" @@ -165,10 +166,10 @@ msgid "" msgstr "" #: catgets/gencat.c:250 debug/pcprofiledump.c:230 debug/xtrace.sh:68 -#: elf/ldconfig.c:329 elf/pldd.c:268 elf/sprof.c:395 iconv/iconv_prog.c:427 +#: elf/ldconfig.c:327 elf/pldd.c:268 elf/sprof.c:395 iconv/iconv_prog.c:410 #: iconv/iconvconfig.c:401 locale/programs/locale.c:298 -#: locale/programs/localedef.c:468 malloc/memusage.sh:75 -#: malloc/memusagestat.c:586 nscd/nscd.c:514 nss/getent.c:93 nss/makedb.c:390 +#: locale/programs/localedef.c:465 malloc/memusage.sh:75 +#: malloc/memusagestat.c:586 nscd/nscd.c:527 nss/getent.c:93 nss/makedb.c:390 #: posix/getconf.c:490 #, c-format msgid "Written by %s.\n" @@ -178,7 +179,7 @@ msgstr "" msgid "*standard input*" msgstr "" -#: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:290 +#: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:273 #: nss/makedb.c:246 #, c-format msgid "cannot open input file `%s'" @@ -367,7 +368,7 @@ msgstr "" msgid ", OS ABI: %s %d.%d.%d" msgstr "" -#: elf/cache.c:163 elf/ldconfig.c:1334 +#: elf/cache.c:163 elf/ldconfig.c:1297 #, c-format msgid "Can't open cache file %s\n" msgstr "" @@ -408,11 +409,11 @@ msgstr "" msgid "Renaming of %s to %s failed" msgstr "" -#: elf/dl-close.c:406 elf/dl-open.c:285 +#: elf/dl-close.c:406 elf/dl-open.c:293 msgid "cannot create scope list" msgstr "" -#: elf/dl-close.c:852 +#: elf/dl-close.c:862 msgid "shared object not open" msgstr "" @@ -439,11 +440,11 @@ msgstr "" msgid "cannot allocate dependency list" msgstr "" -#: elf/dl-deps.c:483 elf/dl-deps.c:543 +#: elf/dl-deps.c:483 elf/dl-deps.c:548 msgid "cannot allocate symbol search list" msgstr "" -#: elf/dl-deps.c:523 +#: elf/dl-deps.c:528 msgid "Filters not supported with LD_TRACE_PRELINKING" msgstr "" @@ -467,143 +468,139 @@ msgstr "" msgid "internal error: symidx out of range of fptr table" msgstr "" -#: elf/dl-hwcaps.c:202 elf/dl-hwcaps.c:214 +#: elf/dl-hwcaps.c:92 elf/dl-hwcaps.c:104 msgid "cannot create capability list" msgstr "" -#: elf/dl-load.c:427 +#: elf/dl-load.c:428 msgid "cannot allocate name record" msgstr "" -#: elf/dl-load.c:513 elf/dl-load.c:626 elf/dl-load.c:715 elf/dl-load.c:811 +#: elf/dl-load.c:514 elf/dl-load.c:627 elf/dl-load.c:716 elf/dl-load.c:812 msgid "cannot create cache for search path" msgstr "" -#: elf/dl-load.c:609 +#: elf/dl-load.c:610 msgid "cannot create RUNPATH/RPATH copy" msgstr "" -#: elf/dl-load.c:702 +#: elf/dl-load.c:703 msgid "cannot create search path array" msgstr "" -#: elf/dl-load.c:892 +#: elf/dl-load.c:964 msgid "cannot stat shared object" msgstr "" -#: elf/dl-load.c:1003 elf/dl-load.c:2191 +#: elf/dl-load.c:1075 elf/dl-load.c:2278 msgid "cannot create shared object descriptor" msgstr "" -#: elf/dl-load.c:1022 elf/dl-load.c:1571 elf/dl-load.c:1672 +#: elf/dl-load.c:1094 elf/dl-load.c:1658 elf/dl-load.c:1759 msgid "cannot read file data" msgstr "" -#: elf/dl-load.c:1068 +#: elf/dl-load.c:1140 msgid "ELF load command alignment not page-aligned" msgstr "" -#: elf/dl-load.c:1075 +#: elf/dl-load.c:1147 msgid "ELF load command address/offset not properly aligned" msgstr "" -#: elf/dl-load.c:1151 -msgid "cannot process note segment" -msgstr "" - -#: elf/dl-load.c:1162 +#: elf/dl-load.c:1226 msgid "object file has no loadable segments" msgstr "" -#: elf/dl-load.c:1175 +#: elf/dl-load.c:1239 msgid "cannot dynamically load executable" msgstr "" -#: elf/dl-load.c:1196 +#: elf/dl-load.c:1275 msgid "object file has no dynamic section" msgstr "" -#: elf/dl-load.c:1223 +#: elf/dl-load.c:1302 msgid "cannot dynamically load position-independent executable" msgstr "" -#: elf/dl-load.c:1225 +#: elf/dl-load.c:1304 msgid "shared object cannot be dlopen()ed" msgstr "" -#: elf/dl-load.c:1238 +#: elf/dl-load.c:1317 msgid "cannot allocate memory for program header" msgstr "" -#: elf/dl-load.c:1271 elf/dl-load.h:130 +#: elf/dl-load.c:1350 elf/dl-load.h:130 msgid "cannot change memory protections" msgstr "" -#: elf/dl-load.c:1291 +#: elf/dl-load.c:1370 msgid "cannot enable executable stack as shared object requires" msgstr "" -#: elf/dl-load.c:1304 +#: elf/dl-load.c:1383 msgid "cannot close file descriptor" msgstr "" -#: elf/dl-load.c:1571 +#: elf/dl-load.c:1658 msgid "file too short" msgstr "" -#: elf/dl-load.c:1606 +#: elf/dl-load.c:1693 msgid "invalid ELF header" msgstr "" -#: elf/dl-load.c:1618 +#: elf/dl-load.c:1705 msgid "ELF file data encoding not big-endian" msgstr "" -#: elf/dl-load.c:1620 +#: elf/dl-load.c:1707 msgid "ELF file data encoding not little-endian" msgstr "" -#: elf/dl-load.c:1624 +#: elf/dl-load.c:1711 msgid "ELF file version ident does not match current one" msgstr "" -#: elf/dl-load.c:1628 +#: elf/dl-load.c:1715 msgid "ELF file OS ABI invalid" msgstr "" -#: elf/dl-load.c:1631 +#: elf/dl-load.c:1718 msgid "ELF file ABI version invalid" msgstr "" -#: elf/dl-load.c:1634 +#: elf/dl-load.c:1721 msgid "nonzero padding in e_ident" msgstr "" -#: elf/dl-load.c:1637 +#: elf/dl-load.c:1724 msgid "internal error" msgstr "" -#: elf/dl-load.c:1644 +#: elf/dl-load.c:1731 msgid "ELF file version does not match current one" msgstr "" -#: elf/dl-load.c:1652 +#: elf/dl-load.c:1739 msgid "only ET_DYN and ET_EXEC can be loaded" msgstr "" -#: elf/dl-load.c:1657 +#: elf/dl-load.c:1744 msgid "ELF file's phentsize not the expected size" msgstr "" -#: elf/dl-load.c:2210 +#: elf/dl-load.c:2297 msgid "wrong ELF class: ELFCLASS64" msgstr "" -#: elf/dl-load.c:2211 +#: elf/dl-load.c:2298 msgid "wrong ELF class: ELFCLASS32" msgstr "" -#: elf/dl-load.c:2214 +#: elf/dl-load.c:2301 msgid "cannot open shared object file" msgstr "" @@ -615,56 +612,56 @@ msgstr "" msgid "cannot map zero-fill pages" msgstr "" -#: elf/dl-lookup.c:882 +#: elf/dl-lookup.c:876 msgid "symbol lookup error" msgstr "" -#: elf/dl-open.c:71 +#: elf/dl-open.c:79 msgid "cannot extend global scope" msgstr "" -#: elf/dl-open.c:391 +#: elf/dl-open.c:399 msgid "TLS generation counter wrapped! Please report this." msgstr "" -#: elf/dl-open.c:783 +#: elf/dl-open.c:808 msgid "invalid mode for dlopen()" msgstr "" -#: elf/dl-open.c:800 +#: elf/dl-open.c:825 msgid "no more namespaces available for dlmopen()" msgstr "" -#: elf/dl-open.c:824 +#: elf/dl-open.c:849 msgid "invalid target namespace in dlmopen()" msgstr "" -#: elf/dl-reloc.c:120 +#: elf/dl-reloc.c:139 msgid "cannot allocate memory in static TLS block" msgstr "" -#: elf/dl-reloc.c:213 +#: elf/dl-reloc.c:232 msgid "cannot make segment writable for relocation" msgstr "" -#: elf/dl-reloc.c:273 +#: elf/dl-reloc.c:292 #, c-format msgid "%s: out of memory to store relocation results for %s\n" msgstr "" -#: elf/dl-reloc.c:289 +#: elf/dl-reloc.c:308 msgid "cannot restore segment prot after reloc" msgstr "" -#: elf/dl-reloc.c:320 +#: elf/dl-reloc.c:339 msgid "cannot apply additional memory protection after relocation" msgstr "" -#: elf/dl-sym.c:150 +#: elf/dl-sym.c:138 msgid "RTLD_NEXT used in code not dynamically loaded" msgstr "" -#: elf/dl-tls.c:931 +#: elf/dl-tls.c:1011 msgid "cannot create TLS data structures" msgstr "" @@ -676,222 +673,218 @@ msgstr "" msgid "cannot allocate version reference table" msgstr "" -#: elf/ldconfig.c:142 +#: elf/ldconfig.c:145 msgid "Print cache" msgstr "" -#: elf/ldconfig.c:143 +#: elf/ldconfig.c:146 msgid "Generate verbose messages" msgstr "" -#: elf/ldconfig.c:144 +#: elf/ldconfig.c:147 msgid "Don't build cache" msgstr "" -#: elf/ldconfig.c:145 +#: elf/ldconfig.c:148 msgid "Don't update symbolic links" msgstr "" -#: elf/ldconfig.c:146 +#: elf/ldconfig.c:149 msgid "Change to and use ROOT as root directory" msgstr "" -#: elf/ldconfig.c:146 +#: elf/ldconfig.c:149 msgid "ROOT" msgstr "" -#: elf/ldconfig.c:147 +#: elf/ldconfig.c:150 msgid "CACHE" msgstr "" -#: elf/ldconfig.c:147 +#: elf/ldconfig.c:150 msgid "Use CACHE as cache file" msgstr "" -#: elf/ldconfig.c:148 +#: elf/ldconfig.c:151 msgid "CONF" msgstr "" -#: elf/ldconfig.c:148 +#: elf/ldconfig.c:151 msgid "Use CONF as configuration file" msgstr "" -#: elf/ldconfig.c:149 +#: elf/ldconfig.c:152 msgid "" "Only process directories specified on the command line. Don't build cache." msgstr "" -#: elf/ldconfig.c:150 +#: elf/ldconfig.c:153 msgid "Manually link individual libraries." msgstr "" -#: elf/ldconfig.c:151 +#: elf/ldconfig.c:154 msgid "FORMAT" msgstr "" -#: elf/ldconfig.c:151 -msgid "Format to use: new, old or compat (default)" +#: elf/ldconfig.c:154 +msgid "Format to use: new (default), old, or compat" msgstr "" -#: elf/ldconfig.c:152 +#: elf/ldconfig.c:155 msgid "Ignore auxiliary cache file" msgstr "" -#: elf/ldconfig.c:160 +#: elf/ldconfig.c:163 msgid "Configure Dynamic Linker Run Time Bindings." msgstr "" -#: elf/ldconfig.c:347 +#: elf/ldconfig.c:346 #, c-format msgid "Path `%s' given more than once" msgstr "" -#: elf/ldconfig.c:387 +#: elf/ldconfig.c:347 +#, c-format +msgid "(from %s:%d and %s:%d)\n" +msgstr "" + +#: elf/ldconfig.c:393 #, c-format msgid "%s is not a known library type" msgstr "" -#: elf/ldconfig.c:415 +#: elf/ldconfig.c:421 #, c-format msgid "Can't stat %s" msgstr "" -#: elf/ldconfig.c:489 +#: elf/ldconfig.c:500 #, c-format msgid "Can't stat %s\n" msgstr "" -#: elf/ldconfig.c:499 +#: elf/ldconfig.c:510 #, c-format msgid "%s is not a symbolic link\n" msgstr "" -#: elf/ldconfig.c:518 +#: elf/ldconfig.c:529 #, c-format msgid "Can't unlink %s" msgstr "" -#: elf/ldconfig.c:524 +#: elf/ldconfig.c:535 #, c-format msgid "Can't link %s to %s" msgstr "" -#: elf/ldconfig.c:530 +#: elf/ldconfig.c:541 msgid " (changed)\n" msgstr "" -#: elf/ldconfig.c:532 +#: elf/ldconfig.c:543 msgid " (SKIPPED)\n" msgstr "" -#: elf/ldconfig.c:587 +#: elf/ldconfig.c:598 #, c-format msgid "Can't find %s" msgstr "" -#: elf/ldconfig.c:603 elf/ldconfig.c:769 elf/ldconfig.c:825 elf/ldconfig.c:857 +#: elf/ldconfig.c:614 elf/ldconfig.c:781 elf/ldconfig.c:839 elf/ldconfig.c:871 #, c-format msgid "Cannot lstat %s" msgstr "" -#: elf/ldconfig.c:610 +#: elf/ldconfig.c:621 #, c-format msgid "Ignored file %s since it is not a regular file." msgstr "" -#: elf/ldconfig.c:619 +#: elf/ldconfig.c:630 #, c-format msgid "No link created since soname could not be found for %s" msgstr "" -#: elf/ldconfig.c:702 +#: elf/ldconfig.c:689 +#, c-format +msgid " (from %s:%d)\n" +msgstr "" + +#: elf/ldconfig.c:714 #, c-format msgid "Can't open directory %s" msgstr "" -#: elf/ldconfig.c:787 elf/ldconfig.c:845 elf/readlib.c:97 +#: elf/ldconfig.c:799 elf/ldconfig.c:859 elf/readlib.c:97 #, c-format msgid "Input file %s not found.\n" msgstr "" -#: elf/ldconfig.c:794 +#: elf/ldconfig.c:806 #, c-format msgid "Cannot stat %s" msgstr "" -#: elf/ldconfig.c:939 +#: elf/ldconfig.c:953 #, c-format msgid "libc5 library %s in wrong directory" msgstr "" -#: elf/ldconfig.c:942 +#: elf/ldconfig.c:956 #, c-format msgid "libc6 library %s in wrong directory" msgstr "" -#: elf/ldconfig.c:945 +#: elf/ldconfig.c:959 #, c-format msgid "libc4 library %s in wrong directory" msgstr "" -#: elf/ldconfig.c:973 +#: elf/ldconfig.c:987 #, c-format msgid "" "libraries %s and %s in directory %s have same soname but different type." msgstr "" -#: elf/ldconfig.c:1083 +#: elf/ldconfig.c:1097 #, c-format msgid "Warning: ignoring configuration file that cannot be opened: %s" msgstr "" -#: elf/ldconfig.c:1149 -#, c-format -msgid "%s:%u: bad syntax in hwcap line" -msgstr "" - -#: elf/ldconfig.c:1155 -#, c-format -msgid "%s:%u: hwcap index %lu above maximum %u" -msgstr "" - -#: elf/ldconfig.c:1162 elf/ldconfig.c:1170 -#, c-format -msgid "%s:%u: hwcap index %lu already defined as %s" -msgstr "" - -#: elf/ldconfig.c:1173 +#: elf/ldconfig.c:1145 #, c-format -msgid "%s:%u: duplicate hwcap %lu %s" +msgid "%s:%u: hwcap directive ignored" msgstr "" -#: elf/ldconfig.c:1195 +#: elf/ldconfig.c:1164 #, c-format msgid "need absolute file name for configuration file when using -r" msgstr "" -#: elf/ldconfig.c:1202 locale/programs/xmalloc.c:63 malloc/obstack.c:416 -#: malloc/obstack.c:418 posix/getconf.c:458 posix/getconf.c:697 +#: elf/ldconfig.c:1171 locale/programs/xasprintf.c:31 +#: locale/programs/xmalloc.c:63 malloc/obstack.c:416 malloc/obstack.c:418 +#: posix/getconf.c:458 posix/getconf.c:697 #, c-format msgid "memory exhausted" msgstr "" -#: elf/ldconfig.c:1235 +#: elf/ldconfig.c:1204 #, c-format msgid "%s:%u: cannot read directory %s" msgstr "" -#: elf/ldconfig.c:1283 +#: elf/ldconfig.c:1252 #, c-format msgid "relative path `%s' used to build cache" msgstr "" -#: elf/ldconfig.c:1313 +#: elf/ldconfig.c:1276 #, c-format msgid "Can't chdir to /" msgstr "" -#: elf/ldconfig.c:1354 +#: elf/ldconfig.c:1317 #, c-format msgid "Can't open cache file directory %s\n" msgstr "" @@ -930,7 +923,7 @@ msgstr "" #. TRANS This is a ``file doesn't exist'' error #. TRANS for ordinary files that are referenced in contexts where they are #. TRANS expected to already exist. -#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.c:37 +#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.h:16 msgid "No such file or directory" msgstr "" @@ -1301,12 +1294,12 @@ msgstr "" msgid "cannot allocate symbol data" msgstr "" -#: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:445 +#: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:428 #, c-format msgid "cannot open output file" msgstr "" -#: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:308 +#: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:291 #, c-format msgid "error while closing input `%s'" msgstr "" @@ -1316,128 +1309,128 @@ msgstr "" msgid "illegal input sequence at position %Zd" msgstr "" -#: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:536 +#: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:519 #, c-format msgid "incomplete character or shift sequence at end of buffer" msgstr "" -#: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:579 -#: iconv/iconv_prog.c:615 +#: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:562 +#: iconv/iconv_prog.c:598 #, c-format msgid "error while reading the input" msgstr "" -#: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:597 +#: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:580 #, c-format msgid "unable to allocate buffer for input" msgstr "" -#: iconv/iconv_prog.c:59 +#: iconv/iconv_prog.c:60 msgid "Input/Output format specification:" msgstr "" -#: iconv/iconv_prog.c:60 +#: iconv/iconv_prog.c:61 msgid "encoding of original text" msgstr "" -#: iconv/iconv_prog.c:61 +#: iconv/iconv_prog.c:62 msgid "encoding for output" msgstr "" -#: iconv/iconv_prog.c:62 +#: iconv/iconv_prog.c:63 msgid "Information:" msgstr "" -#: iconv/iconv_prog.c:63 +#: iconv/iconv_prog.c:64 msgid "list all known coded character sets" msgstr "" -#: iconv/iconv_prog.c:64 locale/programs/localedef.c:124 +#: iconv/iconv_prog.c:65 locale/programs/localedef.c:124 msgid "Output control:" msgstr "" -#: iconv/iconv_prog.c:65 +#: iconv/iconv_prog.c:66 msgid "omit invalid characters from output" msgstr "" -#: iconv/iconv_prog.c:66 iconv/iconvconfig.c:128 +#: iconv/iconv_prog.c:67 iconv/iconvconfig.c:128 #: locale/programs/localedef.c:117 locale/programs/localedef.c:119 #: locale/programs/localedef.c:121 locale/programs/localedef.c:150 #: malloc/memusagestat.c:56 msgid "FILE" msgstr "" -#: iconv/iconv_prog.c:66 +#: iconv/iconv_prog.c:67 msgid "output file" msgstr "" -#: iconv/iconv_prog.c:67 +#: iconv/iconv_prog.c:68 msgid "suppress warnings" msgstr "" -#: iconv/iconv_prog.c:68 +#: iconv/iconv_prog.c:69 msgid "print progress information" msgstr "" -#: iconv/iconv_prog.c:73 +#: iconv/iconv_prog.c:74 msgid "Convert encoding of given files from one encoding to another." msgstr "" -#: iconv/iconv_prog.c:77 +#: iconv/iconv_prog.c:78 msgid "[FILE...]" msgstr "" -#: iconv/iconv_prog.c:230 +#: iconv/iconv_prog.c:177 iconv/iconv_prog.c:239 +#, c-format +msgid "failed to start conversion processing" +msgstr "" + +#: iconv/iconv_prog.c:213 #, c-format msgid "conversions from `%s' and to `%s' are not supported" msgstr "" -#: iconv/iconv_prog.c:235 +#: iconv/iconv_prog.c:218 #, c-format msgid "conversion from `%s' is not supported" msgstr "" -#: iconv/iconv_prog.c:242 +#: iconv/iconv_prog.c:225 #, c-format msgid "conversion to `%s' is not supported" msgstr "" -#: iconv/iconv_prog.c:246 +#: iconv/iconv_prog.c:229 #, c-format msgid "conversion from `%s' to `%s' is not supported" msgstr "" -#: iconv/iconv_prog.c:256 -#, c-format -msgid "failed to start conversion processing" -msgstr "" - -#: iconv/iconv_prog.c:354 +#: iconv/iconv_prog.c:337 #, c-format msgid "error while closing output file" msgstr "" -#: iconv/iconv_prog.c:455 +#: iconv/iconv_prog.c:438 #, c-format msgid "conversion stopped due to problem in writing the output" msgstr "" -#: iconv/iconv_prog.c:532 +#: iconv/iconv_prog.c:515 #, c-format msgid "illegal input sequence at position %ld" msgstr "" -#: iconv/iconv_prog.c:540 +#: iconv/iconv_prog.c:523 #, c-format msgid "internal error (illegal descriptor)" msgstr "" -#: iconv/iconv_prog.c:543 +#: iconv/iconv_prog.c:526 #, c-format msgid "unknown iconv() error %d" msgstr "" -#: iconv/iconv_prog.c:786 +#: iconv/iconv_prog.c:769 msgid "" "The following list contains all the coded character sets known. This does\n" "not necessarily mean that all combinations of these names can be used for\n" @@ -2679,27 +2672,27 @@ msgid "" "--list-archive [FILE]" msgstr "" -#: locale/programs/localedef.c:238 +#: locale/programs/localedef.c:239 #, c-format msgid "cannot create directory for output files" msgstr "" -#: locale/programs/localedef.c:249 +#: locale/programs/localedef.c:250 msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'" msgstr "" -#: locale/programs/localedef.c:263 locale/programs/localedef.c:279 -#: locale/programs/localedef.c:673 locale/programs/localedef.c:693 +#: locale/programs/localedef.c:264 locale/programs/localedef.c:280 +#: locale/programs/localedef.c:678 locale/programs/localedef.c:698 #, c-format msgid "cannot open locale definition file `%s'" msgstr "" -#: locale/programs/localedef.c:303 +#: locale/programs/localedef.c:304 #, c-format msgid "cannot write output files to `%s'" msgstr "" -#: locale/programs/localedef.c:309 +#: locale/programs/localedef.c:310 msgid "no output file produced because errors were issued" msgstr "" @@ -2712,11 +2705,21 @@ msgid "" "%s" msgstr "" -#: locale/programs/localedef.c:641 +#: locale/programs/localedef.c:546 +#, c-format +msgid "cannot create output path '%s': %s" +msgstr "" + +#: locale/programs/localedef.c:554 +#, c-format +msgid "no write permission to output path '%s': %s" +msgstr "" + +#: locale/programs/localedef.c:646 msgid "circular dependencies between locale definitions" msgstr "" -#: locale/programs/localedef.c:647 +#: locale/programs/localedef.c:652 #, c-format msgid "cannot add already read locale `%s' a second time" msgstr "" @@ -3068,7 +3071,7 @@ msgid "unable to free arguments" msgstr "" #: nis/nis_error.h:1 nis/ypclnt.c:825 nis/ypclnt.c:914 posix/regcomp.c:135 -#: sysdeps/gnu/errlist.c:21 +#: sysdeps/gnu/errlist.h:4 msgid "Success" msgstr "" @@ -3109,7 +3112,7 @@ msgid "First/next chain broken" msgstr "" #. TRANS The file permissions do not allow the attempted operation. -#: nis/nis_error.h:11 nis/ypclnt.c:870 sysdeps/gnu/errlist.c:158 +#: nis/nis_error.h:11 nis/ypclnt.c:870 sysdeps/gnu/errlist.h:93 msgid "Permission denied" msgstr "" @@ -3570,44 +3573,6 @@ msgstr "" msgid " No recursive nonmembers\n" msgstr "" -#: nis/nss_nisplus/nisplus-publickey.c:100 -#: nis/nss_nisplus/nisplus-publickey.c:182 -#, c-format -msgid "DES entry for netname %s not unique\n" -msgstr "" - -#: nis/nss_nisplus/nisplus-publickey.c:219 -#, c-format -msgid "netname2user: missing group id list in `%s'" -msgstr "" - -#: nis/nss_nisplus/nisplus-publickey.c:301 -#: nis/nss_nisplus/nisplus-publickey.c:307 -#: nis/nss_nisplus/nisplus-publickey.c:372 -#: nis/nss_nisplus/nisplus-publickey.c:381 -#, c-format -msgid "netname2user: (nis+ lookup): %s\n" -msgstr "" - -#: nis/nss_nisplus/nisplus-publickey.c:320 -#, c-format -msgid "netname2user: DES entry for %s in directory %s not unique" -msgstr "" - -#: nis/nss_nisplus/nisplus-publickey.c:338 -#, c-format -msgid "netname2user: principal name `%s' too long" -msgstr "" - -#: nis/nss_nisplus/nisplus-publickey.c:394 -#, c-format -msgid "netname2user: LOCAL entry for %s in directory %s not unique" -msgstr "" - -#: nis/nss_nisplus/nisplus-publickey.c:401 -msgid "netname2user: should not have uid 0" -msgstr "" - #: nis/ypclnt.c:828 msgid "Request arguments bad" msgstr "" @@ -3696,12 +3661,12 @@ msgstr "" msgid "yp_update: cannot get server address\n" msgstr "" -#: nscd/aicache.c:82 nscd/hstcache.c:452 +#: nscd/aicache.c:69 nscd/hstcache.c:452 #, c-format msgid "Haven't found \"%s\" in hosts cache!" msgstr "" -#: nscd/aicache.c:84 nscd/hstcache.c:454 +#: nscd/aicache.c:71 nscd/hstcache.c:454 #, c-format msgid "Reloading \"%s\" in hosts cache!" msgstr "" @@ -3735,6 +3700,15 @@ msgstr "" msgid "considering %s entry \"%s\", timeout %" msgstr "" +#: nscd/cachedumper.c:168 +msgid " - all data: " +msgstr "" + +#: nscd/cachedumper.c:362 +#, c-format +msgid " - remaining data %p: " +msgstr "" + #: nscd/connections.c:520 #, c-format msgid "invalid persistent database file \"%s\": %s" @@ -3995,18 +3969,18 @@ msgstr "" msgid "setgroups failed" msgstr "" -#: nscd/grpcache.c:385 nscd/hstcache.c:402 nscd/initgrcache.c:385 +#: nscd/grpcache.c:385 nscd/hstcache.c:402 nscd/initgrcache.c:379 #: nscd/pwdcache.c:363 nscd/servicescache.c:310 #, c-format msgid "short write in %s: %s" msgstr "" -#: nscd/grpcache.c:430 nscd/initgrcache.c:81 +#: nscd/grpcache.c:430 nscd/initgrcache.c:75 #, c-format msgid "Haven't found \"%s\" in group cache!" msgstr "" -#: nscd/grpcache.c:432 nscd/initgrcache.c:83 +#: nscd/grpcache.c:432 nscd/initgrcache.c:77 #, c-format msgid "Reloading \"%s\" in group cache!" msgstr "" @@ -4046,118 +4020,122 @@ msgstr "" msgid "Reloading \"%s (%s,%s,%s)\" in netgroup cache!" msgstr "" -#: nscd/nscd.c:106 +#: nscd/nscd.c:108 msgid "Read configuration data from NAME" msgstr "" -#: nscd/nscd.c:108 +#: nscd/nscd.c:110 msgid "Do not fork and display messages on the current tty" msgstr "" -#: nscd/nscd.c:110 +#: nscd/nscd.c:112 +msgid "Print contents of the offline cache file NAME" +msgstr "" + +#: nscd/nscd.c:114 msgid "Do not fork, but otherwise behave like a daemon" msgstr "" -#: nscd/nscd.c:111 +#: nscd/nscd.c:115 msgid "NUMBER" msgstr "" -#: nscd/nscd.c:111 +#: nscd/nscd.c:115 msgid "Start NUMBER threads" msgstr "" -#: nscd/nscd.c:112 +#: nscd/nscd.c:116 msgid "Shut the server down" msgstr "" -#: nscd/nscd.c:113 +#: nscd/nscd.c:117 msgid "Print current configuration statistics" msgstr "" -#: nscd/nscd.c:114 +#: nscd/nscd.c:118 msgid "TABLE" msgstr "" -#: nscd/nscd.c:115 +#: nscd/nscd.c:119 msgid "Invalidate the specified cache" msgstr "" -#: nscd/nscd.c:116 +#: nscd/nscd.c:120 msgid "TABLE,yes" msgstr "" -#: nscd/nscd.c:117 +#: nscd/nscd.c:121 msgid "Use separate cache for each user" msgstr "" -#: nscd/nscd.c:122 +#: nscd/nscd.c:126 msgid "Name Service Cache Daemon." msgstr "" -#: nscd/nscd.c:155 nss/getent.c:987 nss/makedb.c:206 +#: nscd/nscd.c:159 nss/getent.c:987 nss/makedb.c:206 #, c-format msgid "wrong number of arguments" msgstr "" -#: nscd/nscd.c:165 +#: nscd/nscd.c:174 #, c-format msgid "failure while reading configuration file; this is fatal" msgstr "" -#: nscd/nscd.c:174 +#: nscd/nscd.c:183 #, c-format msgid "already running" msgstr "" -#: nscd/nscd.c:194 +#: nscd/nscd.c:203 #, c-format msgid "cannot create a pipe to talk to the child" msgstr "" -#: nscd/nscd.c:198 +#: nscd/nscd.c:207 #, c-format msgid "cannot fork" msgstr "" -#: nscd/nscd.c:268 +#: nscd/nscd.c:277 msgid "cannot change current working directory to \"/\"" msgstr "" -#: nscd/nscd.c:276 +#: nscd/nscd.c:285 msgid "Could not create log file" msgstr "" -#: nscd/nscd.c:355 nscd/nscd_stat.c:209 +#: nscd/nscd.c:364 nscd/nscd_stat.c:209 #, c-format msgid "write incomplete" msgstr "" -#: nscd/nscd.c:366 +#: nscd/nscd.c:375 #, c-format msgid "cannot read invalidate ACK" msgstr "" -#: nscd/nscd.c:372 +#: nscd/nscd.c:381 #, c-format msgid "invalidation failed" msgstr "" -#: nscd/nscd.c:417 nscd/nscd.c:442 nscd/nscd_stat.c:190 +#: nscd/nscd.c:430 nscd/nscd.c:455 nscd/nscd_stat.c:190 #, c-format msgid "Only root is allowed to use this option!" msgstr "" -#: nscd/nscd.c:437 +#: nscd/nscd.c:450 #, c-format msgid "'%s' is not a known database" msgstr "" -#: nscd/nscd.c:452 +#: nscd/nscd.c:465 #, c-format msgid "secure services not implemented anymore" msgstr "" -#: nscd/nscd.c:485 +#: nscd/nscd.c:498 #, c-format msgid "" "Supported tables:\n" @@ -4167,17 +4145,17 @@ msgid "" "%s.\n" msgstr "" -#: nscd/nscd.c:635 +#: nscd/nscd.c:648 #, c-format msgid "'wait' failed\n" msgstr "" -#: nscd/nscd.c:642 +#: nscd/nscd.c:655 #, c-format msgid "child exited with status %d\n" msgstr "" -#: nscd/nscd.c:647 +#: nscd/nscd.c:660 #, c-format msgid "child terminated by signal %d\n" msgstr "" @@ -4909,7 +4887,7 @@ msgstr "" msgid "Input message available" msgstr "" -#: stdio-common/psiginfo-data.h:46 timezone/zdump.c:375 timezone/zic.c:561 +#: stdio-common/psiginfo-data.h:46 timezone/zdump.c:375 timezone/zic.c:564 msgid "I/O error" msgstr "" @@ -4972,20 +4950,16 @@ msgstr "" msgid "Unknown signal" msgstr "" -#: string/_strerror.c:45 sysdeps/mach/_strerror.c:86 +#: string/_strerror.c:30 sysdeps/mach/_strerror.c:55 msgid "Unknown error " msgstr "" -#: string/strerror.c:41 -msgid "Unknown error" -msgstr "" - -#: string/strsignal.c:60 +#: string/strsignal.c:39 #, c-format msgid "Real-time signal %d" msgstr "" -#: string/strsignal.c:64 +#: string/strsignal.c:43 #, c-format msgid "Unknown signal %d" msgstr "" @@ -5093,35 +5067,35 @@ msgstr "" msgid "RPC: (unknown error code)" msgstr "" -#: sunrpc/clnt_perr.c:330 +#: sunrpc/clnt_perr.c:334 msgid "Authentication OK" msgstr "" -#: sunrpc/clnt_perr.c:333 +#: sunrpc/clnt_perr.c:337 msgid "Invalid client credential" msgstr "" -#: sunrpc/clnt_perr.c:337 +#: sunrpc/clnt_perr.c:341 msgid "Server rejected credential" msgstr "" -#: sunrpc/clnt_perr.c:341 +#: sunrpc/clnt_perr.c:345 msgid "Invalid client verifier" msgstr "" -#: sunrpc/clnt_perr.c:345 +#: sunrpc/clnt_perr.c:349 msgid "Server rejected verifier" msgstr "" -#: sunrpc/clnt_perr.c:349 +#: sunrpc/clnt_perr.c:353 msgid "Client credential too weak" msgstr "" -#: sunrpc/clnt_perr.c:353 +#: sunrpc/clnt_perr.c:357 msgid "Invalid server verifier" msgstr "" -#: sunrpc/clnt_perr.c:357 +#: sunrpc/clnt_perr.c:361 msgid "Failed (unspecified error)" msgstr "" @@ -5157,449 +5131,181 @@ msgstr "" msgid "Cannot receive reply to broadcast" msgstr "" -#: sunrpc/rpc_main.c:281 -#, c-format -msgid "%s: output would overwrite %s\n" +#: sunrpc/svc_run.c:72 +msgid "svc_run: - out of memory" msgstr "" -#: sunrpc/rpc_main.c:288 -#, c-format -msgid "%s: unable to open %s: %m\n" +#: sunrpc/svc_run.c:92 +msgid "svc_run: - poll failed" msgstr "" -#: sunrpc/rpc_main.c:300 +#: sunrpc/svc_simple.c:72 #, c-format -msgid "%s: while writing output %s: %m" +msgid "can't reassign procedure number %ld\n" msgstr "" -#: sunrpc/rpc_main.c:336 sunrpc/rpc_main.c:375 -#, c-format -msgid "cannot find C preprocessor: %s\n" +#: sunrpc/svc_simple.c:82 +msgid "couldn't create an rpc server\n" msgstr "" -#: sunrpc/rpc_main.c:411 +#: sunrpc/svc_simple.c:90 #, c-format -msgid "%s: C preprocessor failed with signal %d\n" +msgid "couldn't register prog %ld vers %ld\n" msgstr "" -#: sunrpc/rpc_main.c:414 -#, c-format -msgid "%s: C preprocessor failed with exit code %d\n" +#: sunrpc/svc_simple.c:98 +msgid "registerrpc: out of memory\n" msgstr "" -#: sunrpc/rpc_main.c:454 +#: sunrpc/svc_simple.c:161 #, c-format -msgid "illegal nettype: `%s'\n" +msgid "trouble replying to prog %d\n" msgstr "" -#: sunrpc/rpc_main.c:1089 +#: sunrpc/svc_simple.c:170 #, c-format -msgid "rpcgen: too many defines\n" +msgid "never registered prog %d\n" msgstr "" -#: sunrpc/rpc_main.c:1101 -#, c-format -msgid "rpcgen: arglist coding error\n" +#: sunrpc/svc_tcp.c:165 +msgid "svc_tcp.c - tcp socket creation problem" msgstr "" -#. TRANS: the file will not be removed; this is an -#. TRANS: informative message. -#: sunrpc/rpc_main.c:1134 -#, c-format -msgid "file `%s' already exists and may be overwritten\n" +#: sunrpc/svc_tcp.c:180 +msgid "svc_tcp.c - cannot getsockname or listen" msgstr "" -#: sunrpc/rpc_main.c:1179 -#, c-format -msgid "Cannot specify more than one input file!\n" +#: sunrpc/svc_udp.c:136 +msgid "svcudp_create: socket creation problem" msgstr "" -#: sunrpc/rpc_main.c:1349 -#, c-format -msgid "Cannot use netid flag with inetd flag!\n" +#: sunrpc/svc_udp.c:150 +msgid "svcudp_create - cannot getsockname" msgstr "" -#: sunrpc/rpc_main.c:1358 -#, c-format -msgid "Cannot use netid flag without TIRPC!\n" +#: sunrpc/svc_udp.c:182 +msgid "svcudp_create: xp_pad is too small for IP_PKTINFO\n" msgstr "" -#: sunrpc/rpc_main.c:1365 -#, c-format -msgid "Cannot use table flags with newstyle!\n" +#: sunrpc/svc_udp.c:481 +msgid "enablecache: cache already enabled" msgstr "" -#: sunrpc/rpc_main.c:1384 -#, c-format -msgid "\"infile\" is required for template generation flags.\n" +#: sunrpc/svc_udp.c:487 +msgid "enablecache: could not allocate cache" msgstr "" -#: sunrpc/rpc_main.c:1389 -#, c-format -msgid "Cannot have more than one file generation flag!\n" +#: sunrpc/svc_udp.c:496 +msgid "enablecache: could not allocate cache data" msgstr "" -#: sunrpc/rpc_main.c:1398 -#, c-format -msgid "usage: %s infile\n" +#: sunrpc/svc_udp.c:504 +msgid "enablecache: could not allocate cache fifo" msgstr "" -#: sunrpc/rpc_main.c:1399 -#, c-format -msgid "" -"\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] " -"infile\n" +#: sunrpc/svc_udp.c:540 +msgid "cache_set: victim not found" msgstr "" -#: sunrpc/rpc_main.c:1401 -#, c-format -msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" +#: sunrpc/svc_udp.c:551 +msgid "cache_set: victim alloc failed" msgstr "" -#: sunrpc/rpc_main.c:1403 -#, c-format -msgid "\t%s [-s nettype]* [-o outfile] [infile]\n" +#: sunrpc/svc_udp.c:558 +msgid "cache_set: could not allocate new rpc_buffer" msgstr "" -#: sunrpc/rpc_main.c:1404 -#, c-format -msgid "\t%s [-n netid]* [-o outfile] [infile]\n" +#: sunrpc/svc_unix.c:163 +msgid "svc_unix.c - AF_UNIX socket creation problem" msgstr "" -#: sunrpc/rpc_main.c:1412 -#, c-format -msgid "options:\n" +#: sunrpc/svc_unix.c:179 +msgid "svc_unix.c - cannot getsockname or listen" msgstr "" -#: sunrpc/rpc_main.c:1413 -#, c-format -msgid "-a\t\tgenerate all files, including samples\n" +#: sysdeps/aarch64/dl-bti.c:41 +msgid "mprotect failed to turn on BTI" msgstr "" -#: sunrpc/rpc_main.c:1414 -#, c-format -msgid "-b\t\tbackward compatibility mode (generates code for SunOS 4.1)\n" +#: sysdeps/generic/siglist.h:29 +msgid "Hangup" msgstr "" -#: sunrpc/rpc_main.c:1415 -#, c-format -msgid "-c\t\tgenerate XDR routines\n" +#: sysdeps/generic/siglist.h:30 +msgid "Interrupt" msgstr "" -#: sunrpc/rpc_main.c:1416 -#, c-format -msgid "-C\t\tANSI C mode\n" +#: sysdeps/generic/siglist.h:31 +msgid "Quit" msgstr "" -#: sunrpc/rpc_main.c:1417 -#, c-format -msgid "-Dname[=value]\tdefine a symbol (same as #define)\n" +#: sysdeps/generic/siglist.h:32 +msgid "Illegal instruction" msgstr "" -#: sunrpc/rpc_main.c:1418 -#, c-format -msgid "-h\t\tgenerate header file\n" +#: sysdeps/generic/siglist.h:33 +msgid "Trace/breakpoint trap" msgstr "" -#: sunrpc/rpc_main.c:1419 -#, c-format -msgid "-i size\t\tsize at which to start generating inline code\n" +#: sysdeps/generic/siglist.h:34 +msgid "Aborted" msgstr "" -#: sunrpc/rpc_main.c:1420 -#, c-format -msgid "-I\t\tgenerate code for inetd support in server (for SunOS 4.1)\n" +#: sysdeps/generic/siglist.h:35 +msgid "Floating point exception" msgstr "" -#: sunrpc/rpc_main.c:1421 -#, c-format -msgid "-K seconds\tserver exits after K seconds of inactivity\n" +#: sysdeps/generic/siglist.h:36 +msgid "Killed" msgstr "" -#: sunrpc/rpc_main.c:1422 -#, c-format -msgid "-l\t\tgenerate client side stubs\n" +#: sysdeps/generic/siglist.h:37 +msgid "Bus error" msgstr "" -#: sunrpc/rpc_main.c:1423 -#, c-format -msgid "-L\t\tserver errors will be printed to syslog\n" +#: sysdeps/generic/siglist.h:38 +msgid "Bad system call" msgstr "" -#: sunrpc/rpc_main.c:1424 -#, c-format -msgid "-m\t\tgenerate server side stubs\n" +#: sysdeps/generic/siglist.h:39 +msgid "Segmentation fault" msgstr "" -#: sunrpc/rpc_main.c:1425 -#, c-format -msgid "-M\t\tgenerate MT-safe code\n" +#. TRANS There is no process reading from the other end of a pipe. +#. TRANS Every library function that returns this error code also generates a +#. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled +#. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} +#. TRANS unless it has handled or blocked @code{SIGPIPE}. +#: sysdeps/generic/siglist.h:40 sysdeps/gnu/errlist.h:219 +msgid "Broken pipe" msgstr "" -#: sunrpc/rpc_main.c:1426 -#, c-format -msgid "-n netid\tgenerate server code that supports named netid\n" +#: sysdeps/generic/siglist.h:41 +msgid "Alarm clock" msgstr "" -#: sunrpc/rpc_main.c:1427 -#, c-format -msgid "-N\t\tsupports multiple arguments and call-by-value\n" +#: sysdeps/generic/siglist.h:42 +msgid "Terminated" msgstr "" -#: sunrpc/rpc_main.c:1428 -#, c-format -msgid "-o outfile\tname of the output file\n" +#: sysdeps/generic/siglist.h:43 +msgid "Urgent I/O condition" msgstr "" -#: sunrpc/rpc_main.c:1429 -#, c-format -msgid "-s nettype\tgenerate server code that supports named nettype\n" +#: sysdeps/generic/siglist.h:44 +msgid "Stopped (signal)" msgstr "" -#: sunrpc/rpc_main.c:1430 -#, c-format -msgid "-Sc\t\tgenerate sample client code that uses remote procedures\n" +#: sysdeps/generic/siglist.h:45 +msgid "Stopped" msgstr "" -#: sunrpc/rpc_main.c:1431 -#, c-format -msgid "-Ss\t\tgenerate sample server code that defines remote procedures\n" +#: sysdeps/generic/siglist.h:46 +msgid "Continued" msgstr "" -#: sunrpc/rpc_main.c:1432 -#, c-format -msgid "-Sm \t\tgenerate makefile template \n" -msgstr "" - -#: sunrpc/rpc_main.c:1433 -#, c-format -msgid "-t\t\tgenerate RPC dispatch table\n" -msgstr "" - -#: sunrpc/rpc_main.c:1434 -#, c-format -msgid "-T\t\tgenerate code to support RPC dispatch tables\n" -msgstr "" - -#: sunrpc/rpc_main.c:1435 -#, c-format -msgid "-Y path\t\tdirectory name to find C preprocessor (cpp)\n" -msgstr "" - -#: sunrpc/rpc_main.c:1436 -#, c-format -msgid "-5\t\tSysVr4 compatibility mode\n" -msgstr "" - -#: sunrpc/rpc_main.c:1437 -#, c-format -msgid "--help\t\tgive this help list\n" -msgstr "" - -#: sunrpc/rpc_main.c:1438 -#, c-format -msgid "--version\tprint program version\n" -msgstr "" - -#: sunrpc/rpc_main.c:1440 -#, c-format -msgid "" -"\n" -"For bug reporting instructions, please see:\n" -"%s.\n" -msgstr "" - -#: sunrpc/rpc_scan.c:112 -msgid "constant or identifier expected" -msgstr "" - -#: sunrpc/rpc_scan.c:308 -msgid "illegal character in file: " -msgstr "" - -#: sunrpc/rpc_scan.c:347 sunrpc/rpc_scan.c:373 -msgid "unterminated string constant" -msgstr "" - -#: sunrpc/rpc_scan.c:379 -msgid "empty char string" -msgstr "" - -#: sunrpc/rpc_scan.c:521 sunrpc/rpc_scan.c:531 -msgid "preprocessor error" -msgstr "" - -#: sunrpc/svc_run.c:72 -msgid "svc_run: - out of memory" -msgstr "" - -#: sunrpc/svc_run.c:92 -msgid "svc_run: - poll failed" -msgstr "" - -#: sunrpc/svc_simple.c:72 -#, c-format -msgid "can't reassign procedure number %ld\n" -msgstr "" - -#: sunrpc/svc_simple.c:82 -msgid "couldn't create an rpc server\n" -msgstr "" - -#: sunrpc/svc_simple.c:90 -#, c-format -msgid "couldn't register prog %ld vers %ld\n" -msgstr "" - -#: sunrpc/svc_simple.c:98 -msgid "registerrpc: out of memory\n" -msgstr "" - -#: sunrpc/svc_simple.c:161 -#, c-format -msgid "trouble replying to prog %d\n" -msgstr "" - -#: sunrpc/svc_simple.c:170 -#, c-format -msgid "never registered prog %d\n" -msgstr "" - -#: sunrpc/svc_tcp.c:165 -msgid "svc_tcp.c - tcp socket creation problem" -msgstr "" - -#: sunrpc/svc_tcp.c:180 -msgid "svc_tcp.c - cannot getsockname or listen" -msgstr "" - -#: sunrpc/svc_udp.c:136 -msgid "svcudp_create: socket creation problem" -msgstr "" - -#: sunrpc/svc_udp.c:150 -msgid "svcudp_create - cannot getsockname" -msgstr "" - -#: sunrpc/svc_udp.c:182 -msgid "svcudp_create: xp_pad is too small for IP_PKTINFO\n" -msgstr "" - -#: sunrpc/svc_udp.c:481 -msgid "enablecache: cache already enabled" -msgstr "" - -#: sunrpc/svc_udp.c:487 -msgid "enablecache: could not allocate cache" -msgstr "" - -#: sunrpc/svc_udp.c:496 -msgid "enablecache: could not allocate cache data" -msgstr "" - -#: sunrpc/svc_udp.c:504 -msgid "enablecache: could not allocate cache fifo" -msgstr "" - -#: sunrpc/svc_udp.c:540 -msgid "cache_set: victim not found" -msgstr "" - -#: sunrpc/svc_udp.c:551 -msgid "cache_set: victim alloc failed" -msgstr "" - -#: sunrpc/svc_udp.c:558 -msgid "cache_set: could not allocate new rpc_buffer" -msgstr "" - -#: sunrpc/svc_unix.c:163 -msgid "svc_unix.c - AF_UNIX socket creation problem" -msgstr "" - -#: sunrpc/svc_unix.c:179 -msgid "svc_unix.c - cannot getsockname or listen" -msgstr "" - -#: sysdeps/generic/siglist.h:29 -msgid "Hangup" -msgstr "" - -#: sysdeps/generic/siglist.h:30 -msgid "Interrupt" -msgstr "" - -#: sysdeps/generic/siglist.h:31 -msgid "Quit" -msgstr "" - -#: sysdeps/generic/siglist.h:32 -msgid "Illegal instruction" -msgstr "" - -#: sysdeps/generic/siglist.h:33 -msgid "Trace/breakpoint trap" -msgstr "" - -#: sysdeps/generic/siglist.h:34 -msgid "Aborted" -msgstr "" - -#: sysdeps/generic/siglist.h:35 -msgid "Floating point exception" -msgstr "" - -#: sysdeps/generic/siglist.h:36 -msgid "Killed" -msgstr "" - -#: sysdeps/generic/siglist.h:37 -msgid "Bus error" -msgstr "" - -#: sysdeps/generic/siglist.h:38 -msgid "Bad system call" -msgstr "" - -#: sysdeps/generic/siglist.h:39 -msgid "Segmentation fault" -msgstr "" - -#. TRANS There is no process reading from the other end of a pipe. -#. TRANS Every library function that returns this error code also generates a -#. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled -#. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} -#. TRANS unless it has handled or blocked @code{SIGPIPE}. -#: sysdeps/generic/siglist.h:40 sysdeps/gnu/errlist.c:360 -msgid "Broken pipe" -msgstr "" - -#: sysdeps/generic/siglist.h:41 -msgid "Alarm clock" -msgstr "" - -#: sysdeps/generic/siglist.h:42 -msgid "Terminated" -msgstr "" - -#: sysdeps/generic/siglist.h:43 -msgid "Urgent I/O condition" -msgstr "" - -#: sysdeps/generic/siglist.h:44 -msgid "Stopped (signal)" -msgstr "" - -#: sysdeps/generic/siglist.h:45 -msgid "Stopped" -msgstr "" - -#: sysdeps/generic/siglist.h:46 -msgid "Continued" -msgstr "" - -#: sysdeps/generic/siglist.h:47 -msgid "Child exited" +#: sysdeps/generic/siglist.h:47 +msgid "Child exited" msgstr "" #: sysdeps/generic/siglist.h:48 @@ -5664,12 +5370,12 @@ msgstr "" #. TRANS Only the owner of the file (or other resource) #. TRANS or processes with special privileges can perform the operation. -#: sysdeps/gnu/errlist.c:26 +#: sysdeps/gnu/errlist.h:9 msgid "Operation not permitted" msgstr "" #. TRANS No process matches the specified process ID. -#: sysdeps/gnu/errlist.c:46 +#: sysdeps/gnu/errlist.h:21 msgid "No such process" msgstr "" @@ -5680,12 +5386,12 @@ msgstr "" #. TRANS You can choose to have functions resume after a signal that is handled, #. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted #. TRANS Primitives}. -#: sysdeps/gnu/errlist.c:61 +#: sysdeps/gnu/errlist.h:32 msgid "Interrupted system call" msgstr "" #. TRANS Usually used for physical read or write errors. -#: sysdeps/gnu/errlist.c:70 +#: sysdeps/gnu/errlist.h:37 msgid "Input/output error" msgstr "" @@ -5694,7 +5400,7 @@ msgstr "" #. TRANS This can mean that the device file was installed incorrectly, or that #. TRANS the physical device is missing or not correctly attached to the #. TRANS computer. -#: sysdeps/gnu/errlist.c:83 +#: sysdeps/gnu/errlist.h:46 msgid "No such device or address" msgstr "" @@ -5702,27 +5408,27 @@ msgstr "" #. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a #. TRANS File}) occupy too much memory space. This condition never arises on #. TRANS @gnuhurdsystems{}. -#: sysdeps/gnu/errlist.c:95 +#: sysdeps/gnu/errlist.h:54 msgid "Argument list too long" msgstr "" #. TRANS Invalid executable file format. This condition is detected by the #. TRANS @code{exec} functions; see @ref{Executing a File}. -#: sysdeps/gnu/errlist.c:105 +#: sysdeps/gnu/errlist.h:60 msgid "Exec format error" msgstr "" #. TRANS For example, I/O on a descriptor that has been #. TRANS closed or reading from a descriptor open only for writing (or vice #. TRANS versa). -#: sysdeps/gnu/errlist.c:116 +#: sysdeps/gnu/errlist.h:67 msgid "Bad file descriptor" msgstr "" #. TRANS This error happens on operations that are #. TRANS supposed to manipulate child processes, when there aren't any processes #. TRANS to manipulate. -#: sysdeps/gnu/errlist.c:127 +#: sysdeps/gnu/errlist.h:74 msgid "No child processes" msgstr "" @@ -5730,69 +5436,69 @@ msgstr "" #. TRANS deadlock situation. The system does not guarantee that it will notice #. TRANS all such situations. This error means you got lucky and the system #. TRANS noticed; it might just hang. @xref{File Locks}, for an example. -#: sysdeps/gnu/errlist.c:139 +#: sysdeps/gnu/errlist.h:82 msgid "Resource deadlock avoided" msgstr "" #. TRANS The system cannot allocate more virtual memory #. TRANS because its capacity is full. -#: sysdeps/gnu/errlist.c:149 +#: sysdeps/gnu/errlist.h:88 msgid "Cannot allocate memory" msgstr "" #. TRANS An invalid pointer was detected. #. TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. -#: sysdeps/gnu/errlist.c:168 +#: sysdeps/gnu/errlist.h:99 msgid "Bad address" msgstr "" #. TRANS A file that isn't a block special file was given in a situation that #. TRANS requires one. For example, trying to mount an ordinary file as a file #. TRANS system in Unix gives this error. -#: sysdeps/gnu/errlist.c:179 +#: sysdeps/gnu/errlist.h:106 msgid "Block device required" msgstr "" #. TRANS A system resource that can't be shared is already in use. #. TRANS For example, if you try to delete a file that is the root of a currently #. TRANS mounted filesystem, you get this error. -#: sysdeps/gnu/errlist.c:190 +#: sysdeps/gnu/errlist.h:113 msgid "Device or resource busy" msgstr "" #. TRANS An existing file was specified in a context where it only #. TRANS makes sense to specify a new file. -#: sysdeps/gnu/errlist.c:200 +#: sysdeps/gnu/errlist.h:119 msgid "File exists" msgstr "" #. TRANS An attempt to make an improper link across file systems was detected. #. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but #. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). -#: sysdeps/gnu/errlist.c:211 +#: sysdeps/gnu/errlist.h:126 msgid "Invalid cross-device link" msgstr "" #. TRANS The wrong type of device was given to a function that expects a #. TRANS particular sort of device. -#: sysdeps/gnu/errlist.c:221 +#: sysdeps/gnu/errlist.h:132 msgid "No such device" msgstr "" #. TRANS A file that isn't a directory was specified when a directory is required. -#: sysdeps/gnu/errlist.c:230 +#: sysdeps/gnu/errlist.h:137 msgid "Not a directory" msgstr "" #. TRANS You cannot open a directory for writing, #. TRANS or create or remove hard links to it. -#: sysdeps/gnu/errlist.c:240 +#: sysdeps/gnu/errlist.h:143 msgid "Is a directory" msgstr "" #. TRANS This is used to indicate various kinds of problems #. TRANS with passing the wrong argument to a library function. -#: sysdeps/gnu/errlist.c:250 +#: sysdeps/gnu/errlist.h:149 msgid "Invalid argument" msgstr "" @@ -5803,20 +5509,20 @@ msgstr "" #. TRANS limit that can usually be increased. If you get this error, you might #. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; #. TRANS @pxref{Limits on Resources}. -#: sysdeps/gnu/errlist.c:265 +#: sysdeps/gnu/errlist.h:160 msgid "Too many open files" msgstr "" #. TRANS There are too many distinct file openings in the entire system. Note #. TRANS that any number of linked channels count as just one file opening; see #. TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. -#: sysdeps/gnu/errlist.c:276 +#: sysdeps/gnu/errlist.h:167 msgid "Too many open files in system" msgstr "" #. TRANS Inappropriate I/O control operation, such as trying to set terminal #. TRANS modes on an ordinary file. -#: sysdeps/gnu/errlist.c:286 +#: sysdeps/gnu/errlist.h:173 msgid "Inappropriate ioctl for device" msgstr "" @@ -5825,47 +5531,47 @@ msgstr "" #. TRANS debugger to run a program is considered having it open for writing and #. TRANS will cause this error. (The name stands for ``text file busy''.) This #. TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. -#: sysdeps/gnu/errlist.c:299 +#: sysdeps/gnu/errlist.h:182 msgid "Text file busy" msgstr "" #. TRANS The size of a file would be larger than allowed by the system. -#: sysdeps/gnu/errlist.c:308 +#: sysdeps/gnu/errlist.h:187 msgid "File too large" msgstr "" #. TRANS Write operation on a file failed because the #. TRANS disk is full. -#: sysdeps/gnu/errlist.c:318 +#: sysdeps/gnu/errlist.h:193 msgid "No space left on device" msgstr "" #. TRANS Invalid seek operation (such as on a pipe). -#: sysdeps/gnu/errlist.c:327 +#: sysdeps/gnu/errlist.h:198 msgid "Illegal seek" msgstr "" #. TRANS An attempt was made to modify something on a read-only file system. -#: sysdeps/gnu/errlist.c:336 +#: sysdeps/gnu/errlist.h:203 msgid "Read-only file system" msgstr "" #. TRANS The link count of a single file would become too large. #. TRANS @code{rename} can cause this error if the file being renamed already has #. TRANS as many links as it can take (@pxref{Renaming Files}). -#: sysdeps/gnu/errlist.c:347 +#: sysdeps/gnu/errlist.h:210 msgid "Too many links" msgstr "" #. TRANS Used by mathematical functions when an argument value does #. TRANS not fall into the domain over which the function is defined. -#: sysdeps/gnu/errlist.c:370 +#: sysdeps/gnu/errlist.h:225 msgid "Numerical argument out of domain" msgstr "" #. TRANS Used by mathematical functions when the result value is #. TRANS not representable because of overflow or underflow. -#: sysdeps/gnu/errlist.c:380 +#: sysdeps/gnu/errlist.h:231 msgid "Numerical result out of range" msgstr "" @@ -5898,19 +5604,10 @@ msgstr "" #. TRANS so usually an interactive program should report the error to the user #. TRANS and return to its command loop. #. TRANS @end itemize -#: sysdeps/gnu/errlist.c:417 +#: sysdeps/gnu/errlist.h:264 msgid "Resource temporarily unavailable" msgstr "" -#. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). -#. TRANS The values are always the same, on every operating system. -#. TRANS -#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a -#. TRANS separate error code. -#: sysdeps/gnu/errlist.c:430 -msgid "Operation would block" -msgstr "" - #. TRANS An operation that cannot complete immediately was initiated on an object #. TRANS that has non-blocking mode selected. Some functions that must always #. TRANS block (such as @code{connect}; @pxref{Connecting}) never return @@ -5919,47 +5616,47 @@ msgstr "" #. TRANS the object before the call completes return @code{EALREADY}. You can #. TRANS use the @code{select} function to find out when the pending operation #. TRANS has completed; @pxref{Waiting for I/O}. -#: sysdeps/gnu/errlist.c:446 +#: sysdeps/gnu/errlist.h:276 msgid "Operation now in progress" msgstr "" #. TRANS An operation is already in progress on an object that has non-blocking #. TRANS mode selected. -#: sysdeps/gnu/errlist.c:456 +#: sysdeps/gnu/errlist.h:282 msgid "Operation already in progress" msgstr "" #. TRANS A file that isn't a socket was specified when a socket is required. -#: sysdeps/gnu/errlist.c:465 +#: sysdeps/gnu/errlist.h:287 msgid "Socket operation on non-socket" msgstr "" #. TRANS The size of a message sent on a socket was larger than the supported #. TRANS maximum size. -#: sysdeps/gnu/errlist.c:475 +#: sysdeps/gnu/errlist.h:293 msgid "Message too long" msgstr "" #. TRANS The socket type does not support the requested communications protocol. -#: sysdeps/gnu/errlist.c:484 +#: sysdeps/gnu/errlist.h:298 msgid "Protocol wrong type for socket" msgstr "" #. TRANS You specified a socket option that doesn't make sense for the #. TRANS particular protocol being used by the socket. @xref{Socket Options}. -#: sysdeps/gnu/errlist.c:494 +#: sysdeps/gnu/errlist.h:304 msgid "Protocol not available" msgstr "" #. TRANS The socket domain does not support the requested communications protocol #. TRANS (perhaps because the requested protocol is completely invalid). #. TRANS @xref{Creating a Socket}. -#: sysdeps/gnu/errlist.c:505 +#: sysdeps/gnu/errlist.h:311 msgid "Protocol not supported" msgstr "" #. TRANS The socket type is not supported. -#: sysdeps/gnu/errlist.c:514 +#: sysdeps/gnu/errlist.h:316 msgid "Socket type not supported" msgstr "" @@ -5969,71 +5666,71 @@ msgstr "" #. TRANS error can happen for many calls when the object does not support the #. TRANS particular operation; it is a generic indication that the server knows #. TRANS nothing to do for that call. -#: sysdeps/gnu/errlist.c:528 +#: sysdeps/gnu/errlist.h:326 msgid "Operation not supported" msgstr "" #. TRANS The socket communications protocol family you requested is not supported. -#: sysdeps/gnu/errlist.c:537 +#: sysdeps/gnu/errlist.h:331 msgid "Protocol family not supported" msgstr "" #. TRANS The address family specified for a socket is not supported; it is #. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. -#: sysdeps/gnu/errlist.c:547 +#: sysdeps/gnu/errlist.h:337 msgid "Address family not supported by protocol" msgstr "" #. TRANS The requested socket address is already in use. @xref{Socket Addresses}. -#: sysdeps/gnu/errlist.c:556 +#: sysdeps/gnu/errlist.h:342 msgid "Address already in use" msgstr "" #. TRANS The requested socket address is not available; for example, you tried #. TRANS to give a socket a name that doesn't match the local host name. #. TRANS @xref{Socket Addresses}. -#: sysdeps/gnu/errlist.c:567 +#: sysdeps/gnu/errlist.h:349 msgid "Cannot assign requested address" msgstr "" #. TRANS A socket operation failed because the network was down. -#: sysdeps/gnu/errlist.c:576 +#: sysdeps/gnu/errlist.h:354 msgid "Network is down" msgstr "" #. TRANS A socket operation failed because the subnet containing the remote host #. TRANS was unreachable. -#: sysdeps/gnu/errlist.c:586 +#: sysdeps/gnu/errlist.h:360 msgid "Network is unreachable" msgstr "" #. TRANS A network connection was reset because the remote host crashed. -#: sysdeps/gnu/errlist.c:595 +#: sysdeps/gnu/errlist.h:365 msgid "Network dropped connection on reset" msgstr "" #. TRANS A network connection was aborted locally. -#: sysdeps/gnu/errlist.c:604 +#: sysdeps/gnu/errlist.h:370 msgid "Software caused connection abort" msgstr "" #. TRANS A network connection was closed for reasons outside the control of the #. TRANS local host, such as by the remote machine rebooting or an unrecoverable #. TRANS protocol violation. -#: sysdeps/gnu/errlist.c:615 +#: sysdeps/gnu/errlist.h:377 msgid "Connection reset by peer" msgstr "" #. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this #. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the #. TRANS other from network operations. -#: sysdeps/gnu/errlist.c:626 +#: sysdeps/gnu/errlist.h:384 msgid "No buffer space available" msgstr "" #. TRANS You tried to connect a socket that is already connected. #. TRANS @xref{Connecting}. -#: sysdeps/gnu/errlist.c:636 +#: sysdeps/gnu/errlist.h:390 msgid "Transport endpoint is already connected" msgstr "" @@ -6041,82 +5738,74 @@ msgstr "" #. TRANS try to transmit data over a socket, without first specifying a #. TRANS destination for the data. For a connectionless socket (for datagram #. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. -#: sysdeps/gnu/errlist.c:648 +#: sysdeps/gnu/errlist.h:398 msgid "Transport endpoint is not connected" msgstr "" #. TRANS No default destination address was set for the socket. You get this #. TRANS error when you try to transmit data over a connectionless socket, #. TRANS without first specifying a destination for the data with @code{connect}. -#: sysdeps/gnu/errlist.c:659 +#: sysdeps/gnu/errlist.h:405 msgid "Destination address required" msgstr "" #. TRANS The socket has already been shut down. -#: sysdeps/gnu/errlist.c:668 +#: sysdeps/gnu/errlist.h:410 msgid "Cannot send after transport endpoint shutdown" msgstr "" -#: sysdeps/gnu/errlist.c:676 +#: sysdeps/gnu/errlist.h:413 msgid "Too many references: cannot splice" msgstr "" #. TRANS A socket operation with a specified timeout received no response during #. TRANS the timeout period. -#: sysdeps/gnu/errlist.c:686 +#: sysdeps/gnu/errlist.h:419 msgid "Connection timed out" msgstr "" #. TRANS A remote host refused to allow the network connection (typically because #. TRANS it is not running the requested service). -#: sysdeps/gnu/errlist.c:696 +#: sysdeps/gnu/errlist.h:425 msgid "Connection refused" msgstr "" #. TRANS Too many levels of symbolic links were encountered in looking up a file name. #. TRANS This often indicates a cycle of symbolic links. -#: sysdeps/gnu/errlist.c:706 +#: sysdeps/gnu/errlist.h:431 msgid "Too many levels of symbolic links" msgstr "" #. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for #. TRANS Files}) or host name too long (in @code{gethostname} or #. TRANS @code{sethostname}; @pxref{Host Identification}). -#: sysdeps/gnu/errlist.c:717 +#: sysdeps/gnu/errlist.h:438 msgid "File name too long" msgstr "" #. TRANS The remote host for a requested network connection is down. -#: sysdeps/gnu/errlist.c:726 +#: sysdeps/gnu/errlist.h:443 msgid "Host is down" msgstr "" -#. TRANS The remote host for a requested network connection is not reachable. -#: sysdeps/gnu/errlist.c:735 +#: sysdeps/gnu/errlist.h:448 msgid "No route to host" msgstr "" #. TRANS Directory not empty, where an empty directory was expected. Typically, #. TRANS this error occurs when you are trying to delete a directory. -#: sysdeps/gnu/errlist.c:745 +#: sysdeps/gnu/errlist.h:454 msgid "Directory not empty" msgstr "" -#. TRANS This means that the per-user limit on new process would be exceeded by -#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on -#. TRANS the @code{RLIMIT_NPROC} limit. -#: sysdeps/gnu/errlist.c:756 -msgid "Too many processes" -msgstr "" - #. TRANS The file quota system is confused because there are too many users. #. TRANS @c This can probably happen in a GNU system when using NFS. -#: sysdeps/gnu/errlist.c:766 +#: sysdeps/gnu/errlist.h:460 msgid "Too many users" msgstr "" #. TRANS The user's disk quota was exceeded. -#: sysdeps/gnu/errlist.c:775 +#: sysdeps/gnu/errlist.h:465 msgid "Disk quota exceeded" msgstr "" @@ -6125,7 +5814,7 @@ msgstr "" #. TRANS for NFS file systems or corruption in other file systems. #. TRANS Repairing this condition usually requires unmounting, possibly repairing #. TRANS and remounting the file system. -#: sysdeps/gnu/errlist.c:788 +#: sysdeps/gnu/errlist.h:474 msgid "Stale file handle" msgstr "" @@ -6133,179 +5822,74 @@ msgstr "" #. TRANS already specifies an NFS-mounted file. #. TRANS (This is an error on some operating systems, but we expect it to work #. TRANS properly on @gnuhurdsystems{}, making this error code impossible.) -#: sysdeps/gnu/errlist.c:800 +#: sysdeps/gnu/errlist.h:482 msgid "Object is remote" msgstr "" -#: sysdeps/gnu/errlist.c:808 -msgid "RPC struct is bad" -msgstr "" - -#: sysdeps/gnu/errlist.c:816 -msgid "RPC version wrong" -msgstr "" - -#: sysdeps/gnu/errlist.c:824 -msgid "RPC program not available" -msgstr "" - -#: sysdeps/gnu/errlist.c:832 -msgid "RPC program version wrong" -msgstr "" - -#: sysdeps/gnu/errlist.c:840 -msgid "RPC bad procedure for program" -msgstr "" - #. TRANS This is used by the file locking facilities; see #. TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but #. TRANS it can result from an operation to an NFS server running another #. TRANS operating system. -#: sysdeps/gnu/errlist.c:852 +#: sysdeps/gnu/errlist.h:490 msgid "No locks available" msgstr "" -#. TRANS The file was the wrong type for the -#. TRANS operation, or a data file had the wrong format. -#. TRANS -#. TRANS On some systems @code{chmod} returns this error if you try to set the -#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. -#: sysdeps/gnu/errlist.c:865 -msgid "Inappropriate file type or format" -msgstr "" - -#: sysdeps/gnu/errlist.c:873 -msgid "Authentication error" -msgstr "" - -#: sysdeps/gnu/errlist.c:881 -msgid "Need authenticator" -msgstr "" - #. TRANS This indicates that the function called is #. TRANS not implemented at all, either in the C library itself or in the #. TRANS operating system. When you get this error, you can be sure that this #. TRANS particular function will always fail with @code{ENOSYS} unless you #. TRANS install a new version of the C library or the operating system. -#: sysdeps/gnu/errlist.c:894 +#: sysdeps/gnu/errlist.h:499 msgid "Function not implemented" msgstr "" -#. TRANS A function returns this error when certain parameter -#. TRANS values are valid, but the functionality they request is not available. -#. TRANS This can mean that the function does not implement a particular command -#. TRANS or option value or flag bit at all. For functions that operate on some -#. TRANS object given in a parameter, such as a file descriptor or a port, it -#. TRANS might instead mean that only @emph{that specific object} (file -#. TRANS descriptor, port, etc.) is unable to support the other parameters given; -#. TRANS different file descriptors might support different ranges of parameter -#. TRANS values. -#. TRANS -#. TRANS If the entire function is not available at all in the implementation, -#. TRANS it returns @code{ENOSYS} instead. -#: sysdeps/gnu/errlist.c:914 -msgid "Not supported" -msgstr "" - #. TRANS While decoding a multibyte character the function came along an invalid #. TRANS or an incomplete sequence of bytes or the given wide character is invalid. -#: sysdeps/gnu/errlist.c:924 +#: sysdeps/gnu/errlist.h:505 msgid "Invalid or incomplete multibyte or wide character" msgstr "" -#. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return -#. TRANS this error for certain operations when the caller is not in the -#. TRANS foreground process group of the terminal. Users do not usually see this -#. TRANS error because functions such as @code{read} and @code{write} translate -#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, -#. TRANS for information on process groups and these signals. -#: sysdeps/gnu/errlist.c:938 -msgid "Inappropriate operation for background process" -msgstr "" - -#. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is -#. TRANS translated by a program and the translator program dies while starting -#. TRANS up, before it has connected to the file. -#: sysdeps/gnu/errlist.c:949 -msgid "Translator died" -msgstr "" - -#. TRANS The experienced user will know what is wrong. -#. TRANS @c This error code is a joke. Its perror text is part of the joke. -#. TRANS @c Don't change it. -#: sysdeps/gnu/errlist.c:960 -msgid "?" -msgstr "" - -#. TRANS You did @strong{what}? -#: sysdeps/gnu/errlist.c:969 -msgid "You really blew it this time" -msgstr "" - -#. TRANS Go home and have a glass of warm, dairy-fresh milk. -#. TRANS @c Okay. Since you are dying to know, I'll tell you. -#. TRANS @c This is a joke, obviously. There is a children's song which begins, -#. TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) -#. TRANS @c errno macro EIO, I think about that song. Probably most of my -#. TRANS @c compatriots who program on Unix do, too. One of them must have stayed -#. TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. -#. TRANS @c Whoever did it should be castigated, but it made me laugh. -#. TRANS @c --jtobey@channel1.com -#. TRANS @c -#. TRANS @c "bought the farm" means "died". -jtobey -#. TRANS @c -#. TRANS @c Translators, please do not translate this litteraly, translate it into -#. TRANS @c an idiomatic funny way of saying that the computer died. -#: sysdeps/gnu/errlist.c:991 -msgid "Computer bought the farm" -msgstr "" - -#. TRANS This error code has no purpose. -#: sysdeps/gnu/errlist.c:1000 -msgid "Gratuitous error" -msgstr "" - -#: sysdeps/gnu/errlist.c:1008 +#: sysdeps/gnu/errlist.h:508 msgid "Bad message" msgstr "" -#: sysdeps/gnu/errlist.c:1016 +#: sysdeps/gnu/errlist.h:511 msgid "Identifier removed" msgstr "" -#: sysdeps/gnu/errlist.c:1024 +#: sysdeps/gnu/errlist.h:514 msgid "Multihop attempted" msgstr "" -#: sysdeps/gnu/errlist.c:1032 +#: sysdeps/gnu/errlist.h:517 msgid "No data available" msgstr "" -#: sysdeps/gnu/errlist.c:1040 +#: sysdeps/gnu/errlist.h:520 msgid "Link has been severed" msgstr "" -#: sysdeps/gnu/errlist.c:1048 +#: sysdeps/gnu/errlist.h:523 msgid "No message of desired type" msgstr "" -#: sysdeps/gnu/errlist.c:1056 +#: sysdeps/gnu/errlist.h:526 msgid "Out of streams resources" msgstr "" -#: sysdeps/gnu/errlist.c:1064 +#: sysdeps/gnu/errlist.h:529 msgid "Device not a stream" msgstr "" -#: sysdeps/gnu/errlist.c:1072 +#: sysdeps/gnu/errlist.h:532 msgid "Value too large for defined data type" msgstr "" -#: sysdeps/gnu/errlist.c:1080 +#: sysdeps/gnu/errlist.h:535 msgid "Protocol error" msgstr "" -#: sysdeps/gnu/errlist.c:1088 +#: sysdeps/gnu/errlist.h:538 msgid "Timer expired" msgstr "" @@ -6313,199 +5897,316 @@ msgstr "" #. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, #. TRANS the normal result is for the operations affected to complete with this #. TRANS error; @pxref{Cancel AIO Operations}. -#: sysdeps/gnu/errlist.c:1100 +#: sysdeps/gnu/errlist.h:546 msgid "Operation canceled" msgstr "" -#: sysdeps/gnu/errlist.c:1108 +#: sysdeps/gnu/errlist.h:549 msgid "Owner died" msgstr "" -#: sysdeps/gnu/errlist.c:1116 +#: sysdeps/gnu/errlist.h:552 msgid "State not recoverable" msgstr "" -#: sysdeps/gnu/errlist.c:1124 +#: sysdeps/gnu/errlist.h:555 msgid "Interrupted system call should be restarted" msgstr "" -#: sysdeps/gnu/errlist.c:1132 +#: sysdeps/gnu/errlist.h:558 msgid "Channel number out of range" msgstr "" -#: sysdeps/gnu/errlist.c:1140 +#: sysdeps/gnu/errlist.h:561 msgid "Level 2 not synchronized" msgstr "" -#: sysdeps/gnu/errlist.c:1148 +#: sysdeps/gnu/errlist.h:564 msgid "Level 3 halted" msgstr "" -#: sysdeps/gnu/errlist.c:1156 +#: sysdeps/gnu/errlist.h:567 msgid "Level 3 reset" msgstr "" -#: sysdeps/gnu/errlist.c:1164 +#: sysdeps/gnu/errlist.h:570 msgid "Link number out of range" msgstr "" -#: sysdeps/gnu/errlist.c:1172 +#: sysdeps/gnu/errlist.h:573 msgid "Protocol driver not attached" msgstr "" -#: sysdeps/gnu/errlist.c:1180 +#: sysdeps/gnu/errlist.h:576 msgid "No CSI structure available" msgstr "" -#: sysdeps/gnu/errlist.c:1188 +#: sysdeps/gnu/errlist.h:579 msgid "Level 2 halted" msgstr "" -#: sysdeps/gnu/errlist.c:1196 +#: sysdeps/gnu/errlist.h:582 msgid "Invalid exchange" msgstr "" -#: sysdeps/gnu/errlist.c:1204 +#: sysdeps/gnu/errlist.h:585 msgid "Invalid request descriptor" msgstr "" -#: sysdeps/gnu/errlist.c:1212 +#: sysdeps/gnu/errlist.h:588 msgid "Exchange full" msgstr "" -#: sysdeps/gnu/errlist.c:1220 +#: sysdeps/gnu/errlist.h:591 msgid "No anode" msgstr "" -#: sysdeps/gnu/errlist.c:1228 +#: sysdeps/gnu/errlist.h:594 msgid "Invalid request code" msgstr "" -#: sysdeps/gnu/errlist.c:1236 +#: sysdeps/gnu/errlist.h:597 msgid "Invalid slot" msgstr "" -#: sysdeps/gnu/errlist.c:1244 -msgid "File locking deadlock error" -msgstr "" - -#: sysdeps/gnu/errlist.c:1252 +#: sysdeps/gnu/errlist.h:600 msgid "Bad font file format" msgstr "" -#: sysdeps/gnu/errlist.c:1260 +#: sysdeps/gnu/errlist.h:603 msgid "Machine is not on the network" msgstr "" -#: sysdeps/gnu/errlist.c:1268 +#: sysdeps/gnu/errlist.h:606 msgid "Package not installed" msgstr "" -#: sysdeps/gnu/errlist.c:1276 +#: sysdeps/gnu/errlist.h:609 msgid "Advertise error" msgstr "" -#: sysdeps/gnu/errlist.c:1284 +#: sysdeps/gnu/errlist.h:612 msgid "Srmount error" msgstr "" -#: sysdeps/gnu/errlist.c:1292 +#: sysdeps/gnu/errlist.h:615 msgid "Communication error on send" msgstr "" -#: sysdeps/gnu/errlist.c:1300 +#: sysdeps/gnu/errlist.h:618 msgid "RFS specific error" msgstr "" -#: sysdeps/gnu/errlist.c:1308 +#: sysdeps/gnu/errlist.h:621 msgid "Name not unique on network" msgstr "" -#: sysdeps/gnu/errlist.c:1316 +#: sysdeps/gnu/errlist.h:624 msgid "File descriptor in bad state" msgstr "" -#: sysdeps/gnu/errlist.c:1324 +#: sysdeps/gnu/errlist.h:627 msgid "Remote address changed" msgstr "" -#: sysdeps/gnu/errlist.c:1332 +#: sysdeps/gnu/errlist.h:630 msgid "Can not access a needed shared library" msgstr "" -#: sysdeps/gnu/errlist.c:1340 +#: sysdeps/gnu/errlist.h:633 msgid "Accessing a corrupted shared library" msgstr "" -#: sysdeps/gnu/errlist.c:1348 +#: sysdeps/gnu/errlist.h:636 msgid ".lib section in a.out corrupted" msgstr "" -#: sysdeps/gnu/errlist.c:1356 +#: sysdeps/gnu/errlist.h:639 msgid "Attempting to link in too many shared libraries" msgstr "" -#: sysdeps/gnu/errlist.c:1364 +#: sysdeps/gnu/errlist.h:642 msgid "Cannot exec a shared library directly" msgstr "" -#: sysdeps/gnu/errlist.c:1372 +#: sysdeps/gnu/errlist.h:645 msgid "Streams pipe error" msgstr "" -#: sysdeps/gnu/errlist.c:1380 +#: sysdeps/gnu/errlist.h:648 msgid "Structure needs cleaning" msgstr "" -#: sysdeps/gnu/errlist.c:1388 +#: sysdeps/gnu/errlist.h:651 msgid "Not a XENIX named type file" msgstr "" -#: sysdeps/gnu/errlist.c:1396 +#: sysdeps/gnu/errlist.h:654 msgid "No XENIX semaphores available" msgstr "" -#: sysdeps/gnu/errlist.c:1404 +#: sysdeps/gnu/errlist.h:657 msgid "Is a named type file" msgstr "" -#: sysdeps/gnu/errlist.c:1412 +#: sysdeps/gnu/errlist.h:660 msgid "Remote I/O error" msgstr "" -#: sysdeps/gnu/errlist.c:1420 +#: sysdeps/gnu/errlist.h:663 msgid "No medium found" msgstr "" -#: sysdeps/gnu/errlist.c:1428 +#: sysdeps/gnu/errlist.h:666 msgid "Wrong medium type" msgstr "" -#: sysdeps/gnu/errlist.c:1436 +#: sysdeps/gnu/errlist.h:669 msgid "Required key not available" msgstr "" -#: sysdeps/gnu/errlist.c:1444 +#: sysdeps/gnu/errlist.h:672 msgid "Key has expired" msgstr "" -#: sysdeps/gnu/errlist.c:1452 +#: sysdeps/gnu/errlist.h:675 msgid "Key has been revoked" msgstr "" -#: sysdeps/gnu/errlist.c:1460 +#: sysdeps/gnu/errlist.h:678 msgid "Key was rejected by service" msgstr "" -#: sysdeps/gnu/errlist.c:1468 +#: sysdeps/gnu/errlist.h:681 msgid "Operation not possible due to RF-kill" msgstr "" -#: sysdeps/gnu/errlist.c:1476 +#: sysdeps/gnu/errlist.h:684 msgid "Memory page has hardware error" msgstr "" -#: sysdeps/mach/_strerror.c:56 +#: sysdeps/gnu/errlist.h:687 +msgid "RPC struct is bad" +msgstr "" + +#. TRANS The file was the wrong type for the +#. TRANS operation, or a data file had the wrong format. +#. TRANS +#. TRANS On some systems @code{chmod} returns this error if you try to set the +#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. +#: sysdeps/gnu/errlist.h:696 +msgid "Inappropriate file type or format" +msgstr "" + +#: sysdeps/gnu/errlist.h:699 +msgid "RPC bad procedure for program" +msgstr "" + +#: sysdeps/gnu/errlist.h:702 +msgid "Authentication error" +msgstr "" + +#. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is +#. TRANS translated by a program and the translator program dies while starting +#. TRANS up, before it has connected to the file. +#: sysdeps/gnu/errlist.h:709 +msgid "Translator died" +msgstr "" + +#: sysdeps/gnu/errlist.h:712 +msgid "RPC version wrong" +msgstr "" + +#. TRANS You did @strong{what}? +#: sysdeps/gnu/errlist.h:717 +msgid "You really blew it this time" +msgstr "" + +#. TRANS This means that the per-user limit on new process would be exceeded by +#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on +#. TRANS the @code{RLIMIT_NPROC} limit. +#: sysdeps/gnu/errlist.h:724 +msgid "Too many processes" +msgstr "" + +#. TRANS This error code has no purpose. +#: sysdeps/gnu/errlist.h:729 +msgid "Gratuitous error" +msgstr "" + +#. TRANS A function returns this error when certain parameter +#. TRANS values are valid, but the functionality they request is not available. +#. TRANS This can mean that the function does not implement a particular command +#. TRANS or option value or flag bit at all. For functions that operate on some +#. TRANS object given in a parameter, such as a file descriptor or a port, it +#. TRANS might instead mean that only @emph{that specific object} (file +#. TRANS descriptor, port, etc.) is unable to support the other parameters given; +#. TRANS different file descriptors might support different ranges of parameter +#. TRANS values. +#. TRANS +#. TRANS If the entire function is not available at all in the implementation, +#. TRANS it returns @code{ENOSYS} instead. +#: sysdeps/gnu/errlist.h:745 +msgid "Not supported" +msgstr "" + +#: sysdeps/gnu/errlist.h:748 +msgid "RPC program version wrong" +msgstr "" + +#. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return +#. TRANS this error for certain operations when the caller is not in the +#. TRANS foreground process group of the terminal. Users do not usually see this +#. TRANS error because functions such as @code{read} and @code{write} translate +#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, +#. TRANS for information on process groups and these signals. +#: sysdeps/gnu/errlist.h:758 +msgid "Inappropriate operation for background process" +msgstr "" + +#. TRANS Go home and have a glass of warm, dairy-fresh milk. +#. TRANS @c Okay. Since you are dying to know, I'll tell you. +#. TRANS @c This is a joke, obviously. There is a children's song which begins, +#. TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) +#. TRANS @c errno macro EIO, I think about that song. Probably most of my +#. TRANS @c compatriots who program on Unix do, too. One of them must have stayed +#. TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. +#. TRANS @c Whoever did it should be castigated, but it made me laugh. +#. TRANS @c --jtobey@channel1.com +#. TRANS @c +#. TRANS @c "bought the farm" means "died". -jtobey +#. TRANS @c +#. TRANS @c Translators, please do not translate this litteraly, translate it into +#. TRANS @c an idiomatic funny way of saying that the computer died. +#: sysdeps/gnu/errlist.h:776 +msgid "Computer bought the farm" +msgstr "" + +#. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). +#. TRANS The values are always the same, on every operating system. +#. TRANS +#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a +#. TRANS separate error code. +#: sysdeps/gnu/errlist.h:785 +msgid "Operation would block" +msgstr "" + +#: sysdeps/gnu/errlist.h:788 +msgid "Need authenticator" +msgstr "" + +#. TRANS The experienced user will know what is wrong. +#. TRANS @c This error code is a joke. Its perror text is part of the joke. +#. TRANS @c Don't change it. +#: sysdeps/gnu/errlist.h:795 +msgid "?" +msgstr "" + +#: sysdeps/gnu/errlist.h:798 +msgid "RPC program not available" +msgstr "" + +#: sysdeps/mach/_strerror.c:43 msgid "Error in unknown error system: " msgstr "" @@ -6604,36 +6305,28 @@ msgstr "" msgid "cannot read header from `%s'" msgstr "" -#: sysdeps/x86/dl-cet.c:202 -msgid "mprotect legacy bitmap failed" -msgstr "" - -#: sysdeps/x86/dl-cet.c:217 -msgid "legacy bitmap isn't available" +#: sysdeps/x86/dl-cet.c:147 +msgid "rebuild shared object with IBT support enabled" msgstr "" -#: sysdeps/x86/dl-cet.c:247 -msgid "failed to mark legacy code region" +#: sysdeps/x86/dl-cet.c:158 +msgid "rebuild shared object with SHSTK support enabled" msgstr "" -#: sysdeps/x86/dl-cet.c:269 -msgid "shadow stack isn't enabled" -msgstr "" - -#: sysdeps/x86/dl-cet.c:290 +#: sysdeps/x86/dl-cet.c:187 msgid "can't disable CET" msgstr "" #: timezone/zdump.c:332 -msgid "has fewer than 3 characters" +msgid "has characters other than ASCII alphanumerics, '-' or '+'" msgstr "" #: timezone/zdump.c:334 -msgid "has more than 6 characters" +msgid "has fewer than 3 characters" msgstr "" #: timezone/zdump.c:336 -msgid "has characters other than ASCII alphanumerics, '-' or '+'" +msgid "has more than 6 characters" msgstr "" #: timezone/zdump.c:341 @@ -6668,446 +6361,482 @@ msgstr "" msgid "%s: wild -t argument %s\n" msgstr "" -#: timezone/zic.c:429 +#: timezone/zic.c:432 #, c-format msgid "%s: Memory exhausted: %s\n" msgstr "" -#: timezone/zic.c:437 +#: timezone/zic.c:440 msgid "size overflow" msgstr "" -#: timezone/zic.c:447 +#: timezone/zic.c:450 msgid "alignment overflow" msgstr "" -#: timezone/zic.c:495 +#: timezone/zic.c:498 msgid "integer overflow" msgstr "" -#: timezone/zic.c:529 +#: timezone/zic.c:532 #, c-format msgid "\"%s\", line %: " msgstr "" -#: timezone/zic.c:532 +#: timezone/zic.c:535 #, c-format msgid " (rule from \"%s\", line %)" msgstr "" -#: timezone/zic.c:551 +#: timezone/zic.c:554 #, c-format msgid "warning: " msgstr "" -#: timezone/zic.c:576 +#: timezone/zic.c:579 #, c-format msgid "" "%s: usage is %s [ --version ] [ --help ] [ -v ] \\\n" -"\t[ -l localtime ] [ -p posixrules ] [ -d directory ] \\\n" -"\t[ -t localtime-link ] [ -L leapseconds ] [ filename ... ]\n" +"\t[ -b {slim|fat} ] [ -d directory ] [ -l localtime ] [ -L leapseconds ] \\\n" +"\t[ -p posixrules ] [ -r '[@lo][/@hi]' ] [ -t localtime-link ] \\\n" +"\t[ filename ... ]\n" "\n" "Report bugs to %s.\n" msgstr "" -#: timezone/zic.c:599 +#: timezone/zic.c:604 #, c-format msgid "%s: Can't chdir to %s: %s\n" msgstr "" -#: timezone/zic.c:632 +#: timezone/zic.c:698 msgid "wild compilation-time specification of zic_t" msgstr "" -#: timezone/zic.c:652 +#: timezone/zic.c:716 timezone/zic.c:720 +msgid "incompatible -b options" +msgstr "" + +#: timezone/zic.c:723 +#, c-format +msgid "invalid option: -b '%s'" +msgstr "" + +#: timezone/zic.c:730 #, c-format msgid "%s: More than one -d option specified\n" msgstr "" -#: timezone/zic.c:662 +#: timezone/zic.c:740 #, c-format msgid "%s: More than one -l option specified\n" msgstr "" -#: timezone/zic.c:672 +#: timezone/zic.c:750 #, c-format msgid "%s: More than one -p option specified\n" msgstr "" -#: timezone/zic.c:680 +#: timezone/zic.c:758 #, c-format msgid "%s: More than one -t option specified\n" msgstr "" -#: timezone/zic.c:689 +#: timezone/zic.c:767 msgid "-y is obsolescent" msgstr "" -#: timezone/zic.c:693 +#: timezone/zic.c:771 #, c-format msgid "%s: More than one -y option specified\n" msgstr "" -#: timezone/zic.c:703 +#: timezone/zic.c:781 #, c-format msgid "%s: More than one -L option specified\n" msgstr "" -#: timezone/zic.c:712 +#: timezone/zic.c:792 +#, c-format +msgid "%s: More than one -r option specified\n" +msgstr "" + +#: timezone/zic.c:798 +#, c-format +msgid "%s: invalid time range: %s\n" +msgstr "" + +#: timezone/zic.c:805 msgid "-s ignored" msgstr "" -#: timezone/zic.c:753 +#: timezone/zic.c:848 msgid "link to link" msgstr "" -#: timezone/zic.c:756 timezone/zic.c:760 +#: timezone/zic.c:851 timezone/zic.c:855 msgid "command line" msgstr "" -#: timezone/zic.c:776 +#: timezone/zic.c:871 msgid "empty file name" msgstr "" -#: timezone/zic.c:779 +#: timezone/zic.c:874 #, c-format msgid "file name '%s' begins with '/'" msgstr "" -#: timezone/zic.c:789 +#: timezone/zic.c:884 #, c-format msgid "file name '%s' contains '%.*s' component" msgstr "" -#: timezone/zic.c:795 +#: timezone/zic.c:890 #, c-format msgid "file name '%s' component contains leading '-'" msgstr "" -#: timezone/zic.c:798 +#: timezone/zic.c:893 #, c-format msgid "file name '%s' contains overlength component '%.*s...'" msgstr "" -#: timezone/zic.c:826 +#: timezone/zic.c:921 #, c-format msgid "file name '%s' contains byte '%c'" msgstr "" -#: timezone/zic.c:827 +#: timezone/zic.c:922 #, c-format msgid "file name '%s' contains byte '\\%o'" msgstr "" -#: timezone/zic.c:897 +#: timezone/zic.c:992 #, c-format msgid "%s: link from %s/%s failed: %s\n" msgstr "" -#: timezone/zic.c:907 timezone/zic.c:1876 +#: timezone/zic.c:1002 timezone/zic.c:1992 #, c-format msgid "%s: Can't remove %s/%s: %s\n" msgstr "" -#: timezone/zic.c:931 +#: timezone/zic.c:1026 #, c-format msgid "symbolic link used because hard link failed: %s" msgstr "" -#: timezone/zic.c:939 +#: timezone/zic.c:1034 #, c-format msgid "%s: Can't read %s/%s: %s\n" msgstr "" -#: timezone/zic.c:946 timezone/zic.c:1889 +#: timezone/zic.c:1041 timezone/zic.c:2005 #, c-format msgid "%s: Can't create %s/%s: %s\n" msgstr "" -#: timezone/zic.c:955 +#: timezone/zic.c:1050 #, c-format msgid "copy used because hard link failed: %s" msgstr "" -#: timezone/zic.c:958 +#: timezone/zic.c:1053 #, c-format msgid "copy used because symbolic link failed: %s" msgstr "" -#: timezone/zic.c:1032 timezone/zic.c:1034 +#: timezone/zic.c:1122 timezone/zic.c:1124 msgid "same rule name in multiple files" msgstr "" -#: timezone/zic.c:1081 +#: timezone/zic.c:1171 #, c-format msgid "%s in ruleless zone" msgstr "" -#: timezone/zic.c:1101 +#: timezone/zic.c:1191 msgid "standard input" msgstr "" -#: timezone/zic.c:1106 +#: timezone/zic.c:1196 #, c-format msgid "%s: Can't open %s: %s\n" msgstr "" -#: timezone/zic.c:1117 +#: timezone/zic.c:1207 msgid "line too long" msgstr "" -#: timezone/zic.c:1139 +#: timezone/zic.c:1230 msgid "input line of unknown type" msgstr "" -#: timezone/zic.c:1158 timezone/zic.c:1593 timezone/zic.c:1615 +#: timezone/zic.c:1253 timezone/zic.c:1699 timezone/zic.c:1721 #, c-format msgid "%s: panic: Invalid l_value %d\n" msgstr "" -#: timezone/zic.c:1167 +#: timezone/zic.c:1262 msgid "expected continuation line not found" msgstr "" -#: timezone/zic.c:1203 +#: timezone/zic.c:1298 msgid "fractional seconds rejected by pre-2018 versions of zic" msgstr "" -#: timezone/zic.c:1221 timezone/zic.c:3078 +#: timezone/zic.c:1316 timezone/zic.c:3282 msgid "time overflow" msgstr "" -#: timezone/zic.c:1227 +#: timezone/zic.c:1322 msgid "values over 24 hours not handled by pre-2007 versions of zic" msgstr "" -#: timezone/zic.c:1245 +#: timezone/zic.c:1340 msgid "invalid saved time" msgstr "" -#: timezone/zic.c:1256 +#: timezone/zic.c:1351 msgid "wrong number of fields on Rule line" msgstr "" -#: timezone/zic.c:1265 +#: timezone/zic.c:1360 #, c-format msgid "Invalid rule name \"%s\"" msgstr "" -#: timezone/zic.c:1287 +#: timezone/zic.c:1382 msgid "wrong number of fields on Zone line" msgstr "" -#: timezone/zic.c:1292 +#: timezone/zic.c:1387 #, c-format msgid "\"Zone %s\" line and -l option are mutually exclusive" msgstr "" -#: timezone/zic.c:1298 +#: timezone/zic.c:1393 #, c-format msgid "\"Zone %s\" line and -p option are mutually exclusive" msgstr "" -#: timezone/zic.c:1305 +#: timezone/zic.c:1400 #, c-format msgid "duplicate zone name %s (file \"%s\", line %)" msgstr "" -#: timezone/zic.c:1319 +#: timezone/zic.c:1414 msgid "wrong number of fields on Zone continuation line" msgstr "" -#: timezone/zic.c:1359 +#: timezone/zic.c:1454 msgid "invalid UT offset" msgstr "" -#: timezone/zic.c:1363 +#: timezone/zic.c:1458 msgid "invalid abbreviation format" msgstr "" -#: timezone/zic.c:1372 +#: timezone/zic.c:1467 #, c-format msgid "format '%s' not handled by pre-2015 versions of zic" msgstr "" -#: timezone/zic.c:1399 +#: timezone/zic.c:1494 msgid "Zone continuation line end time is not after end time of previous line" msgstr "" -#: timezone/zic.c:1426 -msgid "wrong number of fields on Leap line" -msgstr "" - -#: timezone/zic.c:1435 +#: timezone/zic.c:1526 msgid "invalid leaping year" msgstr "" -#: timezone/zic.c:1455 timezone/zic.c:1547 +#: timezone/zic.c:1548 timezone/zic.c:1653 msgid "invalid month name" msgstr "" -#: timezone/zic.c:1468 timezone/zic.c:1663 timezone/zic.c:1677 +#: timezone/zic.c:1561 timezone/zic.c:1769 timezone/zic.c:1783 msgid "invalid day of month" msgstr "" -#: timezone/zic.c:1473 +#: timezone/zic.c:1566 msgid "time too small" msgstr "" -#: timezone/zic.c:1477 +#: timezone/zic.c:1570 msgid "time too large" msgstr "" -#: timezone/zic.c:1481 timezone/zic.c:1576 +#: timezone/zic.c:1574 timezone/zic.c:1682 msgid "invalid time of day" msgstr "" -#: timezone/zic.c:1494 -msgid "illegal CORRECTION field on Leap line" +#: timezone/zic.c:1577 +msgid "leap second precedes Epoch" msgstr "" -#: timezone/zic.c:1499 -msgid "illegal Rolling/Stationary field on Leap line" +#: timezone/zic.c:1585 +msgid "wrong number of fields on Leap line" msgstr "" -#: timezone/zic.c:1505 -msgid "leap second precedes Epoch" +#: timezone/zic.c:1591 +msgid "invalid Rolling/Stationary field on Leap line" msgstr "" -#: timezone/zic.c:1518 +#: timezone/zic.c:1599 +msgid "invalid CORRECTION field on Leap line" +msgstr "" + +#: timezone/zic.c:1611 +msgid "wrong number of fields on Expires line" +msgstr "" + +#: timezone/zic.c:1613 +msgid "multiple Expires lines" +msgstr "" + +#: timezone/zic.c:1624 msgid "wrong number of fields on Link line" msgstr "" -#: timezone/zic.c:1522 +#: timezone/zic.c:1628 msgid "blank FROM field on Link line" msgstr "" -#: timezone/zic.c:1597 +#: timezone/zic.c:1703 msgid "invalid starting year" msgstr "" -#: timezone/zic.c:1619 +#: timezone/zic.c:1725 msgid "invalid ending year" msgstr "" -#: timezone/zic.c:1623 +#: timezone/zic.c:1729 msgid "starting year greater than ending year" msgstr "" -#: timezone/zic.c:1630 +#: timezone/zic.c:1736 msgid "typed single year" msgstr "" -#: timezone/zic.c:1633 +#: timezone/zic.c:1739 #, c-format msgid "year type \"%s\" is obsolete; use \"-\" instead" msgstr "" -#: timezone/zic.c:1668 +#: timezone/zic.c:1774 msgid "invalid weekday name" msgstr "" -#: timezone/zic.c:1800 +#: timezone/zic.c:1935 #, c-format msgid "reference clients mishandle more than %d transition times" msgstr "" -#: timezone/zic.c:1804 +#: timezone/zic.c:1939 msgid "pre-2014 clients may mishandle more than 1200 transition times" msgstr "" -#: timezone/zic.c:1920 +#: timezone/zic.c:2058 msgid "too many transition times" msgstr "" -#: timezone/zic.c:2107 +#: timezone/zic.c:2297 #, c-format msgid "%%z UT offset magnitude exceeds 99:59:59" msgstr "" -#: timezone/zic.c:2488 +#: timezone/zic.c:2673 msgid "no POSIX environment variable for zone" msgstr "" -#: timezone/zic.c:2494 +#: timezone/zic.c:2679 #, c-format msgid "%s: pre-%d clients may mishandle distant timestamps" msgstr "" -#: timezone/zic.c:2631 +#: timezone/zic.c:2818 msgid "two rules for same instant" msgstr "" -#: timezone/zic.c:2696 +#: timezone/zic.c:2889 msgid "can't determine time zone abbreviation to use just after until time" msgstr "" -#: timezone/zic.c:2785 -msgid "too many local time types" +#: timezone/zic.c:2964 +msgid "UT offset out of range" msgstr "" -#: timezone/zic.c:2789 -msgid "UT offset out of range" +#: timezone/zic.c:2987 +msgid "too many local time types" msgstr "" -#: timezone/zic.c:2813 +#: timezone/zic.c:3005 msgid "too many leap seconds" msgstr "" -#: timezone/zic.c:2844 +#: timezone/zic.c:3032 msgid "Leap seconds too close together" msgstr "" -#: timezone/zic.c:2891 +#: timezone/zic.c:3043 +msgid "\"#expires\" is obsolescent; use \"Expires\"" +msgstr "" + +#: timezone/zic.c:3049 +msgid "last Leap time does not precede Expires time" +msgstr "" + +#: timezone/zic.c:3095 msgid "Wild result from command execution" msgstr "" -#: timezone/zic.c:2892 +#: timezone/zic.c:3096 #, c-format msgid "%s: command was '%s', result was %d\n" msgstr "" -#: timezone/zic.c:2998 +#: timezone/zic.c:3202 #, c-format msgid "\"%s\" is undocumented; use \"last%s\" instead" msgstr "" -#: timezone/zic.c:3029 +#: timezone/zic.c:3233 #, c-format msgid "\"%s\" is ambiguous in pre-2017c zic" msgstr "" -#: timezone/zic.c:3063 +#: timezone/zic.c:3267 msgid "Odd number of quotation marks" msgstr "" -#: timezone/zic.c:3157 +#: timezone/zic.c:3361 msgid "use of 2/29 in non leap-year" msgstr "" -#: timezone/zic.c:3192 +#: timezone/zic.c:3396 msgid "" "rule goes past start/end of month; will not work with pre-2004 versions of " "zic" msgstr "" -#: timezone/zic.c:3219 +#: timezone/zic.c:3423 msgid "time zone abbreviation has fewer than 3 characters" msgstr "" -#: timezone/zic.c:3221 +#: timezone/zic.c:3425 msgid "time zone abbreviation has too many characters" msgstr "" -#: timezone/zic.c:3223 +#: timezone/zic.c:3427 msgid "time zone abbreviation differs from POSIX standard" msgstr "" -#: timezone/zic.c:3229 +#: timezone/zic.c:3433 msgid "too many, or too long, time zone abbreviations" msgstr "" -#: timezone/zic.c:3275 +#: timezone/zic.c:3479 #, c-format msgid "%s: Can't create directory %s: %s" msgstr "" -- cgit v1.1