From 28f540f45bbacd939bfd07f213bcad2bf730b1bf Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sat, 18 Feb 1995 01:27:10 +0000 Subject: initial import --- manual/socket.texi | 2748 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2748 insertions(+) create mode 100644 manual/socket.texi (limited to 'manual/socket.texi') diff --git a/manual/socket.texi b/manual/socket.texi new file mode 100644 index 0000000..0b338fc --- /dev/null +++ b/manual/socket.texi @@ -0,0 +1,2748 @@ +@node Sockets, Low-Level Terminal Interface, Pipes and FIFOs, Top +@chapter Sockets + +This chapter describes the GNU facilities for interprocess +communication using sockets. + +@cindex socket +@cindex interprocess communication, with sockets +A @dfn{socket} is a generalized interprocess communication channel. +Like a pipe, a socket is represented as a file descriptor. But, +unlike pipes, sockets support communication between unrelated +processes, and even between processes running on different machines +that communicate over a network. Sockets are the primary means of +communicating with other machines; @code{telnet}, @code{rlogin}, +@code{ftp}, @code{talk}, and the other familiar network programs use +sockets. + +Not all operating systems support sockets. In the GNU library, the +header file @file{sys/socket.h} exists regardless of the operating +system, and the socket functions always exist, but if the system does +not really support sockets, these functions always fail. + +@strong{Incomplete:} We do not currently document the facilities for +broadcast messages or for configuring Internet interfaces. + +@menu +* Socket Concepts:: Basic concepts you need to know about. +* Communication Styles::Stream communication, datagrams, and other styles. +* Socket Addresses:: How socket names (``addresses'') work. +* File Namespace:: Details about the file namespace. +* Internet Namespace:: Details about the Internet namespace. +* Misc Namespaces:: Other namespaces not documented fully here. +* Open/Close Sockets:: Creating sockets and destroying them. +* Connections:: Operations on sockets with connection state. +* Datagrams:: Operations on datagram sockets. +* Inetd:: Inetd is a daemon that starts servers on request. + The most convenient way to write a server + is to make it work with Inetd. +* Socket Options:: Miscellaneous low-level socket options. +* Networks Database:: Accessing the database of network names. +@end menu + +@node Socket Concepts +@section Socket Concepts + +@cindex communication style (of a socket) +@cindex style of communication (of a socket) +When you create a socket, you must specify the style of communication +you want to use and the type of protocol that should implement it. +The @dfn{communication style} of a socket defines the user-level +semantics of sending and receiving data on the socket. Choosing a +communication style specifies the answers to questions such as these: + +@itemize @bullet +@item +@cindex packet +@cindex byte stream +@cindex stream (sockets) +@strong{What are the units of data transmission?} Some communication +styles regard the data as a sequence of bytes, with no larger +structure; others group the bytes into records (which are known in +this context as @dfn{packets}). + +@item +@cindex loss of data on sockets +@cindex data loss on sockets +@strong{Can data be lost during normal operation?} Some communication +styles guarantee that all the data sent arrives in the order it was +sent (barring system or network crashes); other styles occasionally +lose data as a normal part of operation, and may sometimes deliver +packets more than once or in the wrong order. + +Designing a program to use unreliable communication styles usually +involves taking precautions to detect lost or misordered packets and +to retransmit data as needed. + +@item +@strong{Is communication entirely with one partner?} Some +communication styles are like a telephone call---you make a +@dfn{connection} with one remote socket, and then exchange data +freely. Other styles are like mailing letters---you specify a +destination address for each message you send. +@end itemize + +@cindex namespace (of socket) +@cindex domain (of socket) +@cindex socket namespace +@cindex socket domain +You must also choose a @dfn{namespace} for naming the socket. A socket +name (``address'') is meaningful only in the context of a particular +namespace. In fact, even the data type to use for a socket name may +depend on the namespace. Namespaces are also called ``domains'', but we +avoid that word as it can be confused with other usage of the same +term. Each namespace has a symbolic name that starts with @samp{PF_}. +A corresponding symbolic name starting with @samp{AF_} designates the +address format for that namespace. + +@cindex network protocol +@cindex protocol (of socket) +@cindex socket protocol +@cindex protocol family +Finally you must choose the @dfn{protocol} to carry out the +communication. The protocol determines what low-level mechanism is used +to transmit and receive data. Each protocol is valid for a particular +namespace and communication style; a namespace is sometimes called a +@dfn{protocol family} because of this, which is why the namespace names +start with @samp{PF_}. + +The rules of a protocol apply to the data passing between two programs, +perhaps on different computers; most of these rules are handled by the +operating system, and you need not know about them. What you do need to +know about protocols is this: + +@itemize @bullet +@item +In order to have communication between two sockets, they must specify +the @emph{same} protocol. + +@item +Each protocol is meaningful with particular style/namespace +combinations and cannot be used with inappropriate combinations. For +example, the TCP protocol fits only the byte stream style of +communication and the Internet namespace. + +@item +For each combination of style and namespace, there is a @dfn{default +protocol} which you can request by specifying 0 as the protocol +number. And that's what you should normally do---use the default. +@end itemize + +@node Communication Styles +@section Communication Styles + +The GNU library includes support for several different kinds of sockets, +each with different characteristics. This section describes the +supported socket types. The symbolic constants listed here are +defined in @file{sys/socket.h}. +@pindex sys/socket.h + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int SOCK_STREAM +The @code{SOCK_STREAM} style is like a pipe (@pxref{Pipes and FIFOs}); +it operates over a connection with a particular remote socket, and +transmits data reliably as a stream of bytes. + +Use of this style is covered in detail in @ref{Connections}. +@end deftypevr + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int SOCK_DGRAM +The @code{SOCK_DGRAM} style is used for sending +individually-addressed packets, unreliably. +It is the diametrical opposite of @code{SOCK_STREAM}. + +Each time you write data to a socket of this kind, that data becomes +one packet. Since @code{SOCK_DGRAM} sockets do not have connections, +you must specify the recipient address with each packet. + +The only guarantee that the system makes about your requests to +transmit data is that it will try its best to deliver each packet you +send. It may succeed with the sixth packet after failing with the +fourth and fifth packets; the seventh packet may arrive before the +sixth, and may arrive a second time after the sixth. + +The typical use for @code{SOCK_DGRAM} is in situations where it is +acceptable to simply resend a packet if no response is seen in a +reasonable amount of time. + +@xref{Datagrams}, for detailed information about how to use datagram +sockets. +@end deftypevr + +@ignore +@c This appears to be only for the NS domain, which we aren't +@c discussing and probably won't support either. +@comment sys/socket.h +@comment BSD +@deftypevr Macro int SOCK_SEQPACKET +This style is like @code{SOCK_STREAM} except that the data is +structured into packets. + +A program that receives data over a @code{SOCK_SEQPACKET} socket +should be prepared to read the entire message packet in a single call +to @code{read}; if it only reads part of the message, the remainder of +the message is simply discarded instead of being available for +subsequent calls to @code{read}. + +Many protocols do not support this communication style. +@end deftypevr +@end ignore + +@ignore +@comment sys/socket.h +@comment BSD +@deftypevr Macro int SOCK_RDM +This style is a reliable version of @code{SOCK_DGRAM}: it sends +individually addressed packets, but guarantees that each packet sent +arrives exactly once. + +@strong{Warning:} It is not clear this is actually supported +by any operating system. +@end deftypevr +@end ignore + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int SOCK_RAW +This style provides access to low-level network protocols and +interfaces. Ordinary user programs usually have no need to use this +style. +@end deftypevr + +@node Socket Addresses +@section Socket Addresses + +@cindex address of socket +@cindex name of socket +@cindex binding a socket address +@cindex socket address (name) binding +The name of a socket is normally called an @dfn{address}. The +functions and symbols for dealing with socket addresses were named +inconsistently, sometimes using the term ``name'' and sometimes using +``address''. You can regard these terms as synonymous where sockets +are concerned. + +A socket newly created with the @code{socket} function has no +address. Other processes can find it for communication only if you +give it an address. We call this @dfn{binding} the address to the +socket, and the way to do it is with the @code{bind} function. + +You need be concerned with the address of a socket if other processes +are to find it and start communicating with it. You can specify an +address for other sockets, but this is usually pointless; the first time +you send data from a socket, or use it to initiate a connection, the +system assigns an address automatically if you have not specified one. + +Occasionally a client needs to specify an address because the server +discriminates based on addresses; for example, the rsh and rlogin +protocols look at the client's socket address and don't bypass password +checking unless it is less than @code{IPPORT_RESERVED} (@pxref{Ports}). + +The details of socket addresses vary depending on what namespace you are +using. @xref{File Namespace}, or @ref{Internet Namespace}, for specific +information. + +Regardless of the namespace, you use the same functions @code{bind} and +@code{getsockname} to set and examine a socket's address. These +functions use a phony data type, @code{struct sockaddr *}, to accept the +address. In practice, the address lives in a structure of some other +data type appropriate to the address format you are using, but you cast +its address to @code{struct sockaddr *} when you pass it to +@code{bind}. + +@menu +* Address Formats:: About @code{struct sockaddr}. +* Setting Address:: Binding an address to a socket. +* Reading Address:: Reading the address of a socket. +@end menu + +@node Address Formats +@subsection Address Formats + +The functions @code{bind} and @code{getsockname} use the generic data +type @code{struct sockaddr *} to represent a pointer to a socket +address. You can't use this data type effectively to interpret an +address or construct one; for that, you must use the proper data type +for the socket's namespace. + +Thus, the usual practice is to construct an address in the proper +namespace-specific type, then cast a pointer to @code{struct sockaddr *} +when you call @code{bind} or @code{getsockname}. + +The one piece of information that you can get from the @code{struct +sockaddr} data type is the @dfn{address format} designator which tells +you which data type to use to understand the address fully. + +@pindex sys/socket.h +The symbols in this section are defined in the header file +@file{sys/socket.h}. + +@comment sys/socket.h +@comment BSD +@deftp {Date Type} {struct sockaddr} +The @code{struct sockaddr} type itself has the following members: + +@table @code +@item short int sa_family +This is the code for the address format of this address. It +identifies the format of the data which follows. + +@item char sa_data[14] +This is the actual socket address data, which is format-dependent. Its +length also depends on the format, and may well be more than 14. The +length 14 of @code{sa_data} is essentially arbitrary. +@end table +@end deftp + +Each address format has a symbolic name which starts with @samp{AF_}. +Each of them corresponds to a @samp{PF_} symbol which designates the +corresponding namespace. Here is a list of address format names: + +@table @code +@comment sys/socket.h +@comment GNU +@item AF_FILE +@vindex AF_FILE +This designates the address format that goes with the file namespace. +(@code{PF_FILE} is the name of that namespace.) @xref{File Namespace +Details}, for information about this address format. + +@comment sys/socket.h +@comment BSD +@item AF_UNIX +@vindex AF_UNIX +This is a synonym for @code{AF_FILE}, for compatibility. +(@code{PF_UNIX} is likewise a synonym for @code{PF_FILE}.) + +@comment sys/socket.h +@comment BSD +@item AF_INET +@vindex AF_INET +This designates the address format that goes with the Internet +namespace. (@code{PF_INET} is the name of that namespace.) +@xref{Internet Address Format}. + +@comment sys/socket.h +@comment BSD +@item AF_UNSPEC +@vindex AF_UNSPEC +This designates no particular address format. It is used only in rare +cases, such as to clear out the default destination address of a +``connected'' datagram socket. @xref{Sending Datagrams}. + +The corresponding namespace designator symbol @code{PF_UNSPEC} exists +for completeness, but there is no reason to use it in a program. +@end table + +@file{sys/socket.h} defines symbols starting with @samp{AF_} for many +different kinds of networks, all or most of which are not actually +implemented. We will document those that really work, as we receive +information about how to use them. + +@node Setting Address +@subsection Setting the Address of a Socket + +@pindex sys/socket.h +Use the @code{bind} function to assign an address to a socket. The +prototype for @code{bind} is in the header file @file{sys/socket.h}. +For examples of use, see @ref{File Namespace}, or see @ref{Inet Example}. + +@comment sys/socket.h +@comment BSD +@deftypefun int bind (int @var{socket}, struct sockaddr *@var{addr}, size_t @var{length}) +The @code{bind} function assigns an address to the socket +@var{socket}. The @var{addr} and @var{length} arguments specify the +address; the detailed format of the address depends on the namespace. +The first part of the address is always the format designator, which +specifies a namespace, and says that the address is in the format for +that namespace. + +The return value is @code{0} on success and @code{-1} on failure. The +following @code{errno} error conditions are defined for this function: + +@table @code +@item EBADF +The @var{socket} argument is not a valid file descriptor. + +@item ENOTSOCK +The descriptor @var{socket} is not a socket. + +@item EADDRNOTAVAIL +The specified address is not available on this machine. + +@item EADDRINUSE +Some other socket is already using the specified address. + +@item EINVAL +The socket @var{socket} already has an address. + +@item EACCES +You do not have permission to access the requested address. (In the +Internet domain, only the super-user is allowed to specify a port number +in the range 0 through @code{IPPORT_RESERVED} minus one; see +@ref{Ports}.) +@end table + +Additional conditions may be possible depending on the particular namespace +of the socket. +@end deftypefun + +@node Reading Address +@subsection Reading the Address of a Socket + +@pindex sys/socket.h +Use the function @code{getsockname} to examine the address of an +Internet socket. The prototype for this function is in the header file +@file{sys/socket.h}. + +@comment sys/socket.h +@comment BSD +@deftypefun int getsockname (int @var{socket}, struct sockaddr *@var{addr}, size_t *@var{length-ptr}) +The @code{getsockname} function returns information about the +address of the socket @var{socket} in the locations specified by the +@var{addr} and @var{length-ptr} arguments. Note that the +@var{length-ptr} is a pointer; you should initialize it to be the +allocation size of @var{addr}, and on return it contains the actual +size of the address data. + +The format of the address data depends on the socket namespace. The +length of the information is usually fixed for a given namespace, so +normally you can know exactly how much space is needed and can provide +that much. The usual practice is to allocate a place for the value +using the proper data type for the socket's namespace, then cast its +address to @code{struct sockaddr *} to pass it to @code{getsockname}. + +The return value is @code{0} on success and @code{-1} on error. The +following @code{errno} error conditions are defined for this function: + +@table @code +@item EBADF +The @var{socket} argument is not a valid file descriptor. + +@item ENOTSOCK +The descriptor @var{socket} is not a socket. + +@item ENOBUFS +There are not enough internal buffers available for the operation. +@end table +@end deftypefun + +You can't read the address of a socket in the file namespace. This is +consistent with the rest of the system; in general, there's no way to +find a file's name from a descriptor for that file. + +@node File Namespace +@section The File Namespace +@cindex file namespace, for sockets + +This section describes the details of the file namespace, whose +symbolic name (required when you create a socket) is @code{PF_FILE}. + +@menu +* Concepts: File Namespace Concepts. What you need to understand. +* Details: File Namespace Details. Address format, symbolic names, etc. +* Example: File Socket Example. Example of creating a socket. +@end menu + +@node File Namespace Concepts +@subsection File Namespace Concepts + +In the file namespace, socket addresses are file names. You can specify +any file name you want as the address of the socket, but you must have +write permission on the directory containing it. In order to connect to +a socket, you must have read permission for it. It's common to put +these files in the @file{/tmp} directory. + +One peculiarity of the file namespace is that the name is only used when +opening the connection; once that is over with, the address is not +meaningful and may not exist. + +Another peculiarity is that you cannot connect to such a socket from +another machine--not even if the other machine shares the file system +which contains the name of the socket. You can see the socket in a +directory listing, but connecting to it never succeeds. Some programs +take advantage of this, such as by asking the client to send its own +process ID, and using the process IDs to distinguish between clients. +However, we recommend you not use this method in protocols you design, +as we might someday permit connections from other machines that mount +the same file systems. Instead, send each new client an identifying +number if you want it to have one. + +After you close a socket in the file namespace, you should delete the +file name from the file system. Use @code{unlink} or @code{remove} to +do this; see @ref{Deleting Files}. + +The file namespace supports just one protocol for any communication +style; it is protocol number @code{0}. + +@node File Namespace Details +@subsection Details of File Namespace + +@pindex sys/socket.h +To create a socket in the file namespace, use the constant +@code{PF_FILE} as the @var{namespace} argument to @code{socket} or +@code{socketpair}. This constant is defined in @file{sys/socket.h}. + +@comment sys/socket.h +@comment GNU +@deftypevr Macro int PF_FILE +This designates the file namespace, in which socket addresses are file +names, and its associated family of protocols. +@end deftypevr + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int PF_UNIX +This is a synonym for @code{PF_FILE}, for compatibility's sake. +@end deftypevr + +The structure for specifying socket names in the file namespace is +defined in the header file @file{sys/un.h}: +@pindex sys/un.h + +@comment sys/un.h +@comment BSD +@deftp {Data Type} {struct sockaddr_un} +This structure is used to specify file namespace socket addresses. It has +the following members: + +@table @code +@item short int sun_family +This identifies the address family or format of the socket address. +You should store the value @code{AF_FILE} to designate the file +namespace. @xref{Socket Addresses}. + +@item char sun_path[108] +This is the file name to use. + +@strong{Incomplete:} Why is 108 a magic number? RMS suggests making +this a zero-length array and tweaking the example following to use +@code{alloca} to allocate an appropriate amount of storage based on +the length of the filename. +@end table +@end deftp + +You should compute the @var{length} parameter for a socket address in +the file namespace as the sum of the size of the @code{sun_family} +component and the string length (@emph{not} the allocation size!) of +the file name string. + +@node File Socket Example +@subsection Example of File-Namespace Sockets + +Here is an example showing how to create and name a socket in the file +namespace. + +@smallexample +@include mkfsock.c.texi +@end smallexample + +@node Internet Namespace +@section The Internet Namespace +@cindex Internet namespace, for sockets + +This section describes the details the protocols and socket naming +conventions used in the Internet namespace. + +To create a socket in the Internet namespace, use the symbolic name +@code{PF_INET} of this namespace as the @var{namespace} argument to +@code{socket} or @code{socketpair}. This macro is defined in +@file{sys/socket.h}. +@pindex sys/socket.h + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int PF_INET +This designates the Internet namespace and associated family of +protocols. +@end deftypevr + +A socket address for the Internet namespace includes the following components: + +@itemize @bullet +@item +The address of the machine you want to connect to. Internet addresses +can be specified in several ways; these are discussed in @ref{Internet +Address Format}, @ref{Host Addresses}, and @ref{Host Names}. + +@item +A port number for that machine. @xref{Ports}. +@end itemize + +You must ensure that the address and port number are represented in a +canonical format called @dfn{network byte order}. @xref{Byte Order}, +for information about this. + +@menu +* Internet Address Format:: How socket addresses are specified in the + Internet namespace. +* Host Addresses:: All about host addresses of internet host. +* Protocols Database:: Referring to protocols by name. +* Ports:: Internet port numbers. +* Services Database:: Ports may have symbolic names. +* Byte Order:: Different hosts may use different byte + ordering conventions; you need to + canonicalize host address and port number. +* Inet Example:: Putting it all together. +@end menu + +@node Internet Address Format +@subsection Internet Socket Address Format + +In the Internet namespace, a socket address consists of a host address +and a port on that host. In addition, the protocol you choose serves +effectively as a part of the address because local port numbers are +meaningful only within a particular protocol. + +The data type for representing socket addresses in the Internet namespace +is defined in the header file @file{netinet/in.h}. +@pindex netinet/in.h + +@comment netinet/in.h +@comment BSD +@deftp {Data Type} {struct sockaddr_in} +This is the data type used to represent socket addresses in the +Internet namespace. It has the following members: + +@table @code +@item short int sin_family +This identifies the address family or format of the socket address. +You should store the value of @code{AF_INET} in this member. +@xref{Socket Addresses}. + +@item struct in_addr sin_addr +This is the Internet address of the host machine. @xref{Host +Addresses}, and @ref{Host Names}, for how to get a value to store +here. + +@item unsigned short int sin_port +This is the port number. @xref{Ports}. +@end table +@end deftp + +When you call @code{bind} or @code{getsockname}, you should specify +@code{sizeof (struct sockaddr_in)} as the @var{length} parameter if +you are using an Internet namespace socket address. + +@node Host Addresses +@subsection Host Addresses + +Each computer on the Internet has one or more @dfn{Internet addresses}, +numbers which identify that computer among all those on the Internet. +Users typically write numeric host addresses as sequences of four +numbers, separated by periods, as in @samp{128.52.46.32}. + +Each computer also has one or more @dfn{host names}, which are strings +of words separated by periods, as in @samp{churchy.gnu.ai.mit.edu}. + +Programs that let the user specify a host typically accept both numeric +addresses and host names. But the program needs a numeric address to +open a connection; to use a host name, you must convert it to the +numeric address it stands for. + +@menu +* Abstract Host Addresses:: What a host number consists of. +* Data type: Host Address Data Type. Data type for a host number. +* Functions: Host Address Functions. Functions to operate on them. +* Names: Host Names. Translating host names to host numbers. +@end menu + +@node Abstract Host Addresses +@subsubsection Internet Host Addresses +@cindex host address, Internet +@cindex Internet host address + +@ifinfo +Each computer on the Internet has one or more Internet addresses, +numbers which identify that computer among all those on the Internet. +@end ifinfo + +@cindex network number +@cindex local network address number +An Internet host address is a number containing four bytes of data. +These are divided into two parts, a @dfn{network number} and a +@dfn{local network address number} within that network. The network +number consists of the first one, two or three bytes; the rest of the +bytes are the local address. + +Network numbers are registered with the Network Information Center +(NIC), and are divided into three classes---A, B, and C. The local +network address numbers of individual machines are registered with the +administrator of the particular network. + +Class A networks have single-byte numbers in the range 0 to 127. There +are only a small number of Class A networks, but they can each support a +very large number of hosts. Medium-sized Class B networks have two-byte +network numbers, with the first byte in the range 128 to 191. Class C +networks are the smallest; they have three-byte network numbers, with +the first byte in the range 192-255. Thus, the first 1, 2, or 3 bytes +of an Internet address specifies a network. The remaining bytes of the +Internet address specify the address within that network. + +The Class A network 0 is reserved for broadcast to all networks. In +addition, the host number 0 within each network is reserved for broadcast +to all hosts in that network. + +The Class A network 127 is reserved for loopback; you can always use +the Internet address @samp{127.0.0.1} to refer to the host machine. + +Since a single machine can be a member of multiple networks, it can +have multiple Internet host addresses. However, there is never +supposed to be more than one machine with the same host address. + +@c !!! this section could document the IN_CLASS* macros in . + +@cindex standard dot notation, for Internet addresses +@cindex dot notation, for Internet addresses +There are four forms of the @dfn{standard numbers-and-dots notation} +for Internet addresses: + +@table @code +@item @var{a}.@var{b}.@var{c}.@var{d} +This specifies all four bytes of the address individually. + +@item @var{a}.@var{b}.@var{c} +The last part of the address, @var{c}, is interpreted as a 2-byte quantity. +This is useful for specifying host addresses in a Class B network with +network address number @code{@var{a}.@var{b}}. + +@item @var{a}.@var{b} +The last part of the address, @var{c}, is interpreted as a 3-byte quantity. +This is useful for specifying host addresses in a Class A network with +network address number @var{a}. + +@item @var{a} +If only one part is given, this corresponds directly to the host address +number. +@end table + +Within each part of the address, the usual C conventions for specifying +the radix apply. In other words, a leading @samp{0x} or @samp{0X} implies +hexadecimal radix; a leading @samp{0} implies octal; and otherwise decimal +radix is assumed. + +@node Host Address Data Type +@subsubsection Host Address Data Type + +Internet host addresses are represented in some contexts as integers +(type @code{unsigned long int}). In other contexts, the integer is +packaged inside a structure of type @code{struct in_addr}. It would +be better if the usage were made consistent, but it is not hard to extract +the integer from the structure or put the integer into a structure. + +The following basic definitions for Internet addresses appear in the +header file @file{netinet/in.h}: +@pindex netinet/in.h + +@comment netinet/in.h +@comment BSD +@deftp {Data Type} {struct in_addr} +This data type is used in certain contexts to contain an Internet host +address. It has just one field, named @code{s_addr}, which records the +host address number as an @code{unsigned long int}. +@end deftp + +@comment netinet/in.h +@comment BSD +@deftypevr Macro {unsigned long int} INADDR_LOOPBACK +You can use this constant to stand for ``the address of this machine,'' +instead of finding its actual address. It is the Internet address +@samp{127.0.0.1}, which is usually called @samp{localhost}. This +special constant saves you the trouble of looking up the address of your +own machine. Also, the system usually implements @code{INADDR_LOOPBACK} +specially, avoiding any network traffic for the case of one machine +talking to itself. +@end deftypevr + +@comment netinet/in.h +@comment BSD +@deftypevr Macro {unsigned long int} INADDR_ANY +You can use this constant to stand for ``any incoming address,'' when +binding to an address. @xref{Setting Address}. This is the usual +address to give in the @code{sin_addr} member of @w{@code{struct +sockaddr_in}} when you want to accept Internet connections. +@end deftypevr + +@comment netinet/in.h +@comment BSD +@deftypevr Macro {unsigned long int} INADDR_BROADCAST +This constant is the address you use to send a broadcast message. +@c !!! broadcast needs further documented +@end deftypevr + +@comment netinet/in.h +@comment BSD +@deftypevr Macro {unsigned long int} INADDR_NONE +This constant is returned by some functions to indicate an error. +@end deftypevr + +@node Host Address Functions +@subsubsection Host Address Functions + +@pindex arpa/inet.h +These additional functions for manipulating Internet addresses are +declared in @file{arpa/inet.h}. They represent Internet addresses in +network byte order; they represent network numbers and +local-address-within-network numbers in host byte order. +@xref{Byte Order}, for an explanation of network and host byte order. + +@comment arpa/inet.h +@comment BSD +@deftypefun {int} inet_aton (const char *@var{name}, struct in_addr *@var{addr}) +This function converts the Internet host address @var{name} +from the standard numbers-and-dots notation into binary data and stores +it in the @code{struct in_addr} that @var{addr} points to. +@code{inet_aton} returns nonzero if the address is valid, zero if not. +@end deftypefun + +@comment arpa/inet.h +@comment BSD +@deftypefun {unsigned long int} inet_addr (const char *@var{name}) +This function converts the Internet host address @var{name} from the +standard numbers-and-dots notation into binary data. If the input is +not valid, @code{inet_addr} returns @code{INADDR_NONE}. This is an +obsolete interface to @code{inet_aton}, described immediately above; it +is obsolete because @code{INADDR_NONE} is a valid address +(255.255.255.255), and @code{inet_aton} provides a cleaner way to +indicate error return. +@end deftypefun + +@comment arpa/inet.h +@comment BSD +@deftypefun {unsigned long int} inet_network (const char *@var{name}) +This function extracts the network number from the address @var{name}, +given in the standard numbers-and-dots notation. +If the input is not valid, @code{inet_network} returns @code{-1}. +@end deftypefun + +@comment arpa/inet.h +@comment BSD +@deftypefun {char *} inet_ntoa (struct in_addr @var{addr}) +This function converts the Internet host address @var{addr} to a +string in the standard numbers-and-dots notation. The return value is +a pointer into a statically-allocated buffer. Subsequent calls will +overwrite the same buffer, so you should copy the string if you need +to save it. +@end deftypefun + +@comment arpa/inet.h +@comment BSD +@deftypefun {struct in_addr} inet_makeaddr (int @var{net}, int @var{local}) +This function makes an Internet host address by combining the network +number @var{net} with the local-address-within-network number +@var{local}. +@end deftypefun + +@comment arpa/inet.h +@comment BSD +@deftypefun int inet_lnaof (struct in_addr @var{addr}) +This function returns the local-address-within-network part of the +Internet host address @var{addr}. +@end deftypefun + +@comment arpa/inet.h +@comment BSD +@deftypefun int inet_netof (struct in_addr @var{addr}) +This function returns the network number part of the Internet host +address @var{addr}. +@end deftypefun + +@node Host Names +@subsubsection Host Names +@cindex hosts database +@cindex converting host name to address +@cindex converting host address to name + +Besides the standard numbers-and-dots notation for Internet addresses, +you can also refer to a host by a symbolic name. The advantage of a +symbolic name is that it is usually easier to remember. For example, +the machine with Internet address @samp{128.52.46.32} is also known as +@samp{churchy.gnu.ai.mit.edu}; and other machines in the @samp{gnu.ai.mit.edu} +domain can refer to it simply as @samp{churchy}. + +@pindex /etc/hosts +@pindex netdb.h +Internally, the system uses a database to keep track of the mapping +between host names and host numbers. This database is usually either +the file @file{/etc/hosts} or an equivalent provided by a name server. +The functions and other symbols for accessing this database are declared +in @file{netdb.h}. They are BSD features, defined unconditionally if +you include @file{netdb.h}. + +@comment netdb.h +@comment BSD +@deftp {Data Type} {struct hostent} +This data type is used to represent an entry in the hosts database. It +has the following members: + +@table @code +@item char *h_name +This is the ``official'' name of the host. + +@item char **h_aliases +These are alternative names for the host, represented as a null-terminated +vector of strings. + +@item int h_addrtype +This is the host address type; in practice, its value is always +@code{AF_INET}. In principle other kinds of addresses could be +represented in the data base as well as Internet addresses; if this were +done, you might find a value in this field other than @code{AF_INET}. +@xref{Socket Addresses}. + +@item int h_length +This is the length, in bytes, of each address. + +@item char **h_addr_list +This is the vector of addresses for the host. (Recall that the host +might be connected to multiple networks and have different addresses on +each one.) The vector is terminated by a null pointer. + +@item char *h_addr +This is a synonym for @code{h_addr_list[0]}; in other words, it is the +first host address. +@end table +@end deftp + +As far as the host database is concerned, each address is just a block +of memory @code{h_length} bytes long. But in other contexts there is an +implicit assumption that you can convert this to a @code{struct in_addr} or +an @code{unsigned long int}. Host addresses in a @code{struct hostent} +structure are always given in network byte order; see @ref{Byte Order}. + +You can use @code{gethostbyname} or @code{gethostbyaddr} to search the +hosts database for information about a particular host. The information +is returned in a statically-allocated structure; you must copy the +information if you need to save it across calls. + +@comment netdb.h +@comment BSD +@deftypefun {struct hostent *} gethostbyname (const char *@var{name}) +The @code{gethostbyname} function returns information about the host +named @var{name}. If the lookup fails, it returns a null pointer. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct hostent *} gethostbyaddr (const char *@var{addr}, int @var{length}, int @var{format}) +The @code{gethostbyaddr} function returns information about the host +with Internet address @var{addr}. The @var{length} argument is the +size (in bytes) of the address at @var{addr}. @var{format} specifies +the address format; for an Internet address, specify a value of +@code{AF_INET}. + +If the lookup fails, @code{gethostbyaddr} returns a null pointer. +@end deftypefun + +@vindex h_errno +If the name lookup by @code{gethostbyname} or @code{gethostbyaddr} +fails, you can find out the reason by looking at the value of the +variable @code{h_errno}. (It would be cleaner design for these +functions to set @code{errno}, but use of @code{h_errno} is compatible +with other systems.) Before using @code{h_errno}, you must declare it +like this: + +@smallexample +extern int h_errno; +@end smallexample + +Here are the error codes that you may find in @code{h_errno}: + +@table @code +@comment netdb.h +@comment BSD +@item HOST_NOT_FOUND +@vindex HOST_NOT_FOUND +No such host is known in the data base. + +@comment netdb.h +@comment BSD +@item TRY_AGAIN +@vindex TRY_AGAIN +This condition happens when the name server could not be contacted. If +you try again later, you may succeed then. + +@comment netdb.h +@comment BSD +@item NO_RECOVERY +@vindex NO_RECOVERY +A non-recoverable error occurred. + +@comment netdb.h +@comment BSD +@item NO_ADDRESS +@vindex NO_ADDRESS +The host database contains an entry for the name, but it doesn't have an +associated Internet address. +@end table + +You can also scan the entire hosts database one entry at a time using +@code{sethostent}, @code{gethostent}, and @code{endhostent}. Be careful +in using these functions, because they are not reentrant. + +@comment netdb.h +@comment BSD +@deftypefun void sethostent (int @var{stayopen}) +This function opens the hosts database to begin scanning it. You can +then call @code{gethostent} to read the entries. + +@c There was a rumor that this flag has different meaning if using the DNS, +@c but it appears this description is accurate in that case also. +If the @var{stayopen} argument is nonzero, this sets a flag so that +subsequent calls to @code{gethostbyname} or @code{gethostbyaddr} will +not close the database (as they usually would). This makes for more +efficiency if you call those functions several times, by avoiding +reopening the database for each call. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct hostent *} gethostent () +This function returns the next entry in the hosts database. It +returns a null pointer if there are no more entries. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun void endhostent () +This function closes the hosts database. +@end deftypefun + +@node Ports +@subsection Internet Ports +@cindex port number + +A socket address in the Internet namespace consists of a machine's +Internet address plus a @dfn{port number} which distinguishes the +sockets on a given machine (for a given protocol). Port numbers range +from 0 to 65,535. + +Port numbers less than @code{IPPORT_RESERVED} are reserved for standard +servers, such as @code{finger} and @code{telnet}. There is a database +that keeps track of these, and you can use the @code{getservbyname} +function to map a service name onto a port number; see @ref{Services +Database}. + +If you write a server that is not one of the standard ones defined in +the database, you must choose a port number for it. Use a number +greater than @code{IPPORT_USERRESERVED}; such numbers are reserved for +servers and won't ever be generated automatically by the system. +Avoiding conflicts with servers being run by other users is up to you. + +When you use a socket without specifying its address, the system +generates a port number for it. This number is between +@code{IPPORT_RESERVED} and @code{IPPORT_USERRESERVED}. + +On the Internet, it is actually legitimate to have two different +sockets with the same port number, as long as they never both try to +communicate with the same socket address (host address plus port +number). You shouldn't duplicate a port number except in special +circumstances where a higher-level protocol requires it. Normally, +the system won't let you do it; @code{bind} normally insists on +distinct port numbers. To reuse a port number, you must set the +socket option @code{SO_REUSEADDR}. @xref{Socket-Level Options}. + +@pindex netinet/in.h +These macros are defined in the header file @file{netinet/in.h}. + +@comment netinet/in.h +@comment BSD +@deftypevr Macro int IPPORT_RESERVED +Port numbers less than @code{IPPORT_RESERVED} are reserved for +superuser use. +@end deftypevr + +@comment netinet/in.h +@comment BSD +@deftypevr Macro int IPPORT_USERRESERVED +Port numbers greater than or equal to @code{IPPORT_USERRESERVED} are +reserved for explicit use; they will never be allocated automatically. +@end deftypevr + +@node Services Database +@subsection The Services Database +@cindex services database +@cindex converting service name to port number +@cindex converting port number to service name + +@pindex /etc/services +The database that keeps track of ``well-known'' services is usually +either the file @file{/etc/services} or an equivalent from a name server. +You can use these utilities, declared in @file{netdb.h}, to access +the services database. +@pindex netdb.h + +@comment netdb.h +@comment BSD +@deftp {Data Type} {struct servent} +This data type holds information about entries from the services database. +It has the following members: + +@table @code +@item char *s_name +This is the ``official'' name of the service. + +@item char **s_aliases +These are alternate names for the service, represented as an array of +strings. A null pointer terminates the array. + +@item int s_port +This is the port number for the service. Port numbers are given in +network byte order; see @ref{Byte Order}. + +@item char *s_proto +This is the name of the protocol to use with this service. +@xref{Protocols Database}. +@end table +@end deftp + +To get information about a particular service, use the +@code{getservbyname} or @code{getservbyport} functions. The information +is returned in a statically-allocated structure; you must copy the +information if you need to save it across calls. + +@comment netdb.h +@comment BSD +@deftypefun {struct servent *} getservbyname (const char *@var{name}, const char *@var{proto}) +The @code{getservbyname} function returns information about the +service named @var{name} using protocol @var{proto}. If it can't find +such a service, it returns a null pointer. + +This function is useful for servers as well as for clients; servers +use it to determine which port they should listen on (@pxref{Listening}). +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct servent *} getservbyport (int @var{port}, const char *@var{proto}) +The @code{getservbyport} function returns information about the +service at port @var{port} using protocol @var{proto}. If it can't +find such a service, it returns a null pointer. +@end deftypefun + +You can also scan the services database using @code{setservent}, +@code{getservent}, and @code{endservent}. Be careful in using these +functions, because they are not reentrant. + +@comment netdb.h +@comment BSD +@deftypefun void setservent (int @var{stayopen}) +This function opens the services database to begin scanning it. + +If the @var{stayopen} argument is nonzero, this sets a flag so that +subsequent calls to @code{getservbyname} or @code{getservbyport} will +not close the database (as they usually would). This makes for more +efficiency if you call those functions several times, by avoiding +reopening the database for each call. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct servent *} getservent (void) +This function returns the next entry in the services database. If +there are no more entries, it returns a null pointer. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun void endservent (void) +This function closes the services database. +@end deftypefun + +@node Byte Order +@subsection Byte Order Conversion +@cindex byte order conversion, for socket +@cindex converting byte order + +@cindex big-endian +@cindex little-endian +Different kinds of computers use different conventions for the +ordering of bytes within a word. Some computers put the most +significant byte within a word first (this is called ``big-endian'' +order), and others put it last (``little-endian'' order). + +@cindex network byte order +So that machines with different byte order conventions can +communicate, the Internet protocols specify a canonical byte order +convention for data transmitted over the network. This is known +as the @dfn{network byte order}. + +When establishing an Internet socket connection, you must make sure that +the data in the @code{sin_port} and @code{sin_addr} members of the +@code{sockaddr_in} structure are represented in the network byte order. +If you are encoding integer data in the messages sent through the +socket, you should convert this to network byte order too. If you don't +do this, your program may fail when running on or talking to other kinds +of machines. + +If you use @code{getservbyname} and @code{gethostbyname} or +@code{inet_addr} to get the port number and host address, the values are +already in the network byte order, and you can copy them directly into +the @code{sockaddr_in} structure. + +Otherwise, you have to convert the values explicitly. Use +@code{htons} and @code{ntohs} to convert values for the @code{sin_port} +member. Use @code{htonl} and @code{ntohl} to convert values for the +@code{sin_addr} member. (Remember, @code{struct in_addr} is equivalent +to @code{unsigned long int}.) These functions are declared in +@file{netinet/in.h}. +@pindex netinet/in.h + +@comment netinet/in.h +@comment BSD +@deftypefun {unsigned short int} htons (unsigned short int @var{hostshort}) +This function converts the @code{short} integer @var{hostshort} from +host byte order to network byte order. +@end deftypefun + +@comment netinet/in.h +@comment BSD +@deftypefun {unsigned short int} ntohs (unsigned short int @var{netshort}) +This function converts the @code{short} integer @var{netshort} from +network byte order to host byte order. +@end deftypefun + +@comment netinet/in.h +@comment BSD +@deftypefun {unsigned long int} htonl (unsigned long int @var{hostlong}) +This function converts the @code{long} integer @var{hostlong} from +host byte order to network byte order. +@end deftypefun + +@comment netinet/in.h +@comment BSD +@deftypefun {unsigned long int} ntohl (unsigned long int @var{netlong}) +This function converts the @code{long} integer @var{netlong} from +network byte order to host byte order. +@end deftypefun + +@node Protocols Database +@subsection Protocols Database +@cindex protocols database + +The communications protocol used with a socket controls low-level +details of how data is exchanged. For example, the protocol implements +things like checksums to detect errors in transmissions, and routing +instructions for messages. Normal user programs have little reason to +mess with these details directly. + +@cindex TCP (Internet protocol) +The default communications protocol for the Internet namespace depends on +the communication style. For stream communication, the default is TCP +(``transmission control protocol''). For datagram communication, the +default is UDP (``user datagram protocol''). For reliable datagram +communication, the default is RDP (``reliable datagram protocol''). +You should nearly always use the default. + +@pindex /etc/protocols +Internet protocols are generally specified by a name instead of a +number. The network protocols that a host knows about are stored in a +database. This is usually either derived from the file +@file{/etc/protocols}, or it may be an equivalent provided by a name +server. You look up the protocol number associated with a named +protocol in the database using the @code{getprotobyname} function. + +Here are detailed descriptions of the utilities for accessing the +protocols database. These are declared in @file{netdb.h}. +@pindex netdb.h + +@comment netdb.h +@comment BSD +@deftp {Data Type} {struct protoent} +This data type is used to represent entries in the network protocols +database. It has the following members: + +@table @code +@item char *p_name +This is the official name of the protocol. + +@item char **p_aliases +These are alternate names for the protocol, specified as an array of +strings. The last element of the array is a null pointer. + +@item int p_proto +This is the protocol number (in host byte order); use this member as the +@var{protocol} argument to @code{socket}. +@end table +@end deftp + +You can use @code{getprotobyname} and @code{getprotobynumber} to search +the protocols database for a specific protocol. The information is +returned in a statically-allocated structure; you must copy the +information if you need to save it across calls. + +@comment netdb.h +@comment BSD +@deftypefun {struct protoent *} getprotobyname (const char *@var{name}) +The @code{getprotobyname} function returns information about the +network protocol named @var{name}. If there is no such protocol, it +returns a null pointer. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct protoent *} getprotobynumber (int @var{protocol}) +The @code{getprotobynumber} function returns information about the +network protocol with number @var{protocol}. If there is no such +protocol, it returns a null pointer. +@end deftypefun + +You can also scan the whole protocols database one protocol at a time by +using @code{setprotoent}, @code{getprotoent}, and @code{endprotoent}. +Be careful in using these functions, because they are not reentrant. + +@comment netdb.h +@comment BSD +@deftypefun void setprotoent (int @var{stayopen}) +This function opens the protocols database to begin scanning it. + +If the @var{stayopen} argument is nonzero, this sets a flag so that +subsequent calls to @code{getprotobyname} or @code{getprotobynumber} will +not close the database (as they usually would). This makes for more +efficiency if you call those functions several times, by avoiding +reopening the database for each call. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct protoent *} getprotoent (void) +This function returns the next entry in the protocols database. It +returns a null pointer if there are no more entries. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun void endprotoent (void) +This function closes the protocols database. +@end deftypefun + +@node Inet Example +@subsection Internet Socket Example + +Here is an example showing how to create and name a socket in the +Internet namespace. The newly created socket exists on the machine that +the program is running on. Rather than finding and using the machine's +Internet address, this example specifies @code{INADDR_ANY} as the host +address; the system replaces that with the machine's actual address. + +@smallexample +@include mkisock.c.texi +@end smallexample + +Here is another example, showing how you can fill in a @code{sockaddr_in} +structure, given a host name string and a port number: + +@smallexample +@include isockad.c.texi +@end smallexample + +@node Misc Namespaces +@section Other Namespaces + +@vindex PF_NS +@vindex PF_ISO +@vindex PF_CCITT +@vindex PF_IMPLINK +@vindex PF_ROUTE +Certain other namespaces and associated protocol families are supported +but not documented yet because they are not often used. @code{PF_NS} +refers to the Xerox Network Software protocols. @code{PF_ISO} stands +for Open Systems Interconnect. @code{PF_CCITT} refers to protocols from +CCITT. @file{socket.h} defines these symbols and others naming protocols +not actually implemented. + +@code{PF_IMPLINK} is used for communicating between hosts and Internet +Message Processors. For information on this, and on @code{PF_ROUTE}, an +occasionally-used local area routing protocol, see the GNU Hurd Manual +(to appear in the future). + +@node Open/Close Sockets +@section Opening and Closing Sockets + +This section describes the actual library functions for opening and +closing sockets. The same functions work for all namespaces and +connection styles. + +@menu +* Creating a Socket:: How to open a socket. +* Closing a Socket:: How to close a socket. +* Socket Pairs:: These are created like pipes. +@end menu + +@node Creating a Socket +@subsection Creating a Socket +@cindex creating a socket +@cindex socket, creating +@cindex opening a socket + +The primitive for creating a socket is the @code{socket} function, +declared in @file{sys/socket.h}. +@pindex sys/socket.h + +@comment sys/socket.h +@comment BSD +@deftypefun int socket (int @var{namespace}, int @var{style}, int @var{protocol}) +This function creates a socket and specifies communication style +@var{style}, which should be one of the socket styles listed in +@ref{Communication Styles}. The @var{namespace} argument specifies +the namespace; it must be @code{PF_FILE} (@pxref{File Namespace}) or +@code{PF_INET} (@pxref{Internet Namespace}). @var{protocol} +designates the specific protocol (@pxref{Socket Concepts}); zero is +usually right for @var{protocol}. + +The return value from @code{socket} is the file descriptor for the new +socket, or @code{-1} in case of error. The following @code{errno} error +conditions are defined for this function: + +@table @code +@item EPROTONOSUPPORT +The @var{protocol} or @var{style} is not supported by the +@var{namespace} specified. + +@item EMFILE +The process already has too many file descriptors open. + +@item ENFILE +The system already has too many file descriptors open. + +@item EACCESS +The process does not have privilege to create a socket of the specified +@var{style} or @var{protocol}. + +@item ENOBUFS +The system ran out of internal buffer space. +@end table + +The file descriptor returned by the @code{socket} function supports both +read and write operations. But, like pipes, sockets do not support file +positioning operations. +@end deftypefun + +For examples of how to call the @code{socket} function, +see @ref{File Namespace}, or @ref{Inet Example}. + + +@node Closing a Socket +@subsection Closing a Socket +@cindex socket, closing +@cindex closing a socket +@cindex shutting down a socket +@cindex socket shutdown + +When you are finished using a socket, you can simply close its +file descriptor with @code{close}; see @ref{Opening and Closing Files}. +If there is still data waiting to be transmitted over the connection, +normally @code{close} tries to complete this transmission. You +can control this behavior using the @code{SO_LINGER} socket option to +specify a timeout period; see @ref{Socket Options}. + +@pindex sys/socket.h +You can also shut down only reception or only transmission on a +connection by calling @code{shutdown}, which is declared in +@file{sys/socket.h}. + +@comment sys/socket.h +@comment BSD +@deftypefun int shutdown (int @var{socket}, int @var{how}) +The @code{shutdown} function shuts down the connection of socket +@var{socket}. The argument @var{how} specifies what action to +perform: + +@table @code +@item 0 +Stop receiving data for this socket. If further data arrives, +reject it. + +@item 1 +Stop trying to transmit data from this socket. Discard any data +waiting to be sent. Stop looking for acknowledgement of data already +sent; don't retransmit it if it is lost. + +@item 2 +Stop both reception and transmission. +@end table + +The return value is @code{0} on success and @code{-1} on failure. The +following @code{errno} error conditions are defined for this function: + +@table @code +@item EBADF +@var{socket} is not a valid file descriptor. + +@item ENOTSOCK +@var{socket} is not a socket. + +@item ENOTCONN +@var{socket} is not connected. +@end table +@end deftypefun + +@node Socket Pairs +@subsection Socket Pairs +@cindex creating a socket pair +@cindex socket pair +@cindex opening a socket pair + +@pindex sys/socket.h +A @dfn{socket pair} consists of a pair of connected (but unnamed) +sockets. It is very similar to a pipe and is used in much the same +way. Socket pairs are created with the @code{socketpair} function, +declared in @file{sys/socket.h}. A socket pair is much like a pipe; the +main difference is that the socket pair is bidirectional, whereas the +pipe has one input-only end and one output-only end (@pxref{Pipes and +FIFOs}). + +@comment sys/socket.h +@comment BSD +@deftypefun int socketpair (int @var{namespace}, int @var{style}, int @var{protocol}, int @var{filedes}@t{[2]}) +This function creates a socket pair, returning the file descriptors in +@code{@var{filedes}[0]} and @code{@var{filedes}[1]}. The socket pair +is a full-duplex communications channel, so that both reading and writing +may be performed at either end. + +The @var{namespace}, @var{style}, and @var{protocol} arguments are +interpreted as for the @code{socket} function. @var{style} should be +one of the communication styles listed in @ref{Communication Styles}. +The @var{namespace} argument specifies the namespace, which must be +@code{AF_FILE} (@pxref{File Namespace}); @var{protocol} specifies the +communications protocol, but zero is the only meaningful value. + +If @var{style} specifies a connectionless communication style, then +the two sockets you get are not @emph{connected}, strictly speaking, +but each of them knows the other as the default destination address, +so they can send packets to each other. + +The @code{socketpair} function returns @code{0} on success and @code{-1} +on failure. The following @code{errno} error conditions are defined +for this function: + +@table @code +@item EMFILE +The process has too many file descriptors open. + +@item EAFNOSUPPORT +The specified namespace is not supported. + +@item EPROTONOSUPPORT +The specified protocol is not supported. + +@item EOPNOTSUPP +The specified protocol does not support the creation of socket pairs. +@end table +@end deftypefun + +@node Connections +@section Using Sockets with Connections + +@cindex connection +@cindex client +@cindex server +The most common communication styles involve making a connection to a +particular other socket, and then exchanging data with that socket +over and over. Making a connection is asymmetric; one side (the +@dfn{client}) acts to request a connection, while the other side (the +@dfn{server}) makes a socket and waits for the connection request. + +@iftex +@itemize @bullet +@item +@ref{Connecting}, describes what the client program must do to +initiate a connection with a server. + +@item +@ref{Listening}, and @ref{Accepting Connections}, describe what the +server program must do to wait for and act upon connection requests +from clients. + +@item +@ref{Transferring Data}, describes how data is transferred through the +connected socket. +@end itemize +@end iftex + +@menu +* Connecting:: What the client program must do. +* Listening:: How a server program waits for requests. +* Accepting Connections:: What the server does when it gets a request. +* Who is Connected:: Getting the address of the + other side of a connection. +* Transferring Data:: How to send and receive data. +* Byte Stream Example:: An example program: a client for communicating + over a byte stream socket in the Internet namespace. +* Server Example:: A corresponding server program. +* Out-of-Band Data:: This is an advanced feature. +@end menu + +@node Connecting +@subsection Making a Connection +@cindex connecting a socket +@cindex socket, connecting +@cindex socket, initiating a connection +@cindex socket, client actions + +In making a connection, the client makes a connection while the server +waits for and accepts the connection. Here we discuss what the client +program must do, using the @code{connect} function, which is declared in +@file{sys/socket.h}. + +@comment sys/socket.h +@comment BSD +@deftypefun int connect (int @var{socket}, struct sockaddr *@var{addr}, size_t @var{length}) +The @code{connect} function initiates a connection from the socket +with file descriptor @var{socket} to the socket whose address is +specified by the @var{addr} and @var{length} arguments. (This socket +is typically on another machine, and it must be already set up as a +server.) @xref{Socket Addresses}, for information about how these +arguments are interpreted. + +Normally, @code{connect} waits until the server responds to the request +before it returns. You can set nonblocking mode on the socket +@var{socket} to make @code{connect} return immediately without waiting +for the response. @xref{File Status Flags}, for information about +nonblocking mode. +@c !!! how do you tell when it has finished connecting? I suspect the +@c way you do it is select for writing. + +The normal return value from @code{connect} is @code{0}. If an error +occurs, @code{connect} returns @code{-1}. The following @code{errno} +error conditions are defined for this function: + +@table @code +@item EBADF +The socket @var{socket} is not a valid file descriptor. + +@item ENOTSOCK +The socket @var{socket} is not a socket. + +@item EADDRNOTAVAIL +The specified address is not available on the remote machine. + +@item EAFNOSUPPORT +The namespace of the @var{addr} is not supported by this socket. + +@item EISCONN +The socket @var{socket} is already connected. + +@item ETIMEDOUT +The attempt to establish the connection timed out. + +@item ECONNREFUSED +The server has actively refused to establish the connection. + +@item ENETUNREACH +The network of the given @var{addr} isn't reachable from this host. + +@item EADDRINUSE +The socket address of the given @var{addr} is already in use. + +@item EINPROGRESS +The socket @var{socket} is non-blocking and the connection could not be +established immediately. You can determine when the connection is +completely established with @code{select}; @pxref{Waiting for I/O}. +Another @code{connect} call on the same socket, before the connection is +completely established, will fail with @code{EALREADY}. + +@item EALREADY +The socket @var{socket} is non-blocking and already has a pending +connection in progress (see @code{EINPROGRESS} above). +@end table +@end deftypefun + +@node Listening +@subsection Listening for Connections +@cindex listening (sockets) +@cindex sockets, server actions +@cindex sockets, listening + +Now let us consider what the server process must do to accept +connections on a socket. First it must use the @code{listen} function +to enable connection requests on the socket, and then accept each +incoming connection with a call to @code{accept} (@pxref{Accepting +Connections}). Once connection requests are enabled on a server socket, +the @code{select} function reports when the socket has a connection +ready to be accepted (@pxref{Waiting for I/O}). + +The @code{listen} function is not allowed for sockets using +connectionless communication styles. + +You can write a network server that does not even start running until a +connection to it is requested. @xref{Inetd Servers}. + +In the Internet namespace, there are no special protection mechanisms +for controlling access to connect to a port; any process on any machine +can make a connection to your server. If you want to restrict access to +your server, make it examine the addresses associated with connection +requests or implement some other handshaking or identification +protocol. + +In the File namespace, the ordinary file protection bits control who has +access to connect to the socket. + +@comment sys/socket.h +@comment BSD +@deftypefun int listen (int @var{socket}, unsigned int @var{n}) +The @code{listen} function enables the socket @var{socket} to accept +connections, thus making it a server socket. + +The argument @var{n} specifies the length of the queue for pending +connections. When the queue fills, new clients attempting to connect +fail with @code{ECONNREFUSED} until the server calls @code{accept} to +accept a connection from the queue. + +The @code{listen} function returns @code{0} on success and @code{-1} +on failure. The following @code{errno} error conditions are defined +for this function: + +@table @code +@item EBADF +The argument @var{socket} is not a valid file descriptor. + +@item ENOTSOCK +The argument @var{socket} is not a socket. + +@item EOPNOTSUPP +The socket @var{socket} does not support this operation. +@end table +@end deftypefun + +@node Accepting Connections +@subsection Accepting Connections +@cindex sockets, accepting connections +@cindex accepting connections + +When a server receives a connection request, it can complete the +connection by accepting the request. Use the function @code{accept} +to do this. + +A socket that has been established as a server can accept connection +requests from multiple clients. The server's original socket +@emph{does not become part} of the connection; instead, @code{accept} +makes a new socket which participates in the connection. +@code{accept} returns the descriptor for this socket. The server's +original socket remains available for listening for further connection +requests. + +The number of pending connection requests on a server socket is finite. +If connection requests arrive from clients faster than the server can +act upon them, the queue can fill up and additional requests are refused +with a @code{ECONNREFUSED} error. You can specify the maximum length of +this queue as an argument to the @code{listen} function, although the +system may also impose its own internal limit on the length of this +queue. + +@comment sys/socket.h +@comment BSD +@deftypefun int accept (int @var{socket}, struct sockaddr *@var{addr}, size_t *@var{length-ptr}) +This function is used to accept a connection request on the server +socket @var{socket}. + +The @code{accept} function waits if there are no connections pending, +unless the socket @var{socket} has nonblocking mode set. (You can use +@code{select} to wait for a pending connection, with a nonblocking +socket.) @xref{File Status Flags}, for information about nonblocking +mode. + +The @var{addr} and @var{length-ptr} arguments are used to return +information about the name of the client socket that initiated the +connection. @xref{Socket Addresses}, for information about the format +of the information. + +Accepting a connection does not make @var{socket} part of the +connection. Instead, it creates a new socket which becomes +connected. The normal return value of @code{accept} is the file +descriptor for the new socket. + +After @code{accept}, the original socket @var{socket} remains open and +unconnected, and continues listening until you close it. You can +accept further connections with @var{socket} by calling @code{accept} +again. + +If an error occurs, @code{accept} returns @code{-1}. The following +@code{errno} error conditions are defined for this function: + +@table @code +@item EBADF +The @var{socket} argument is not a valid file descriptor. + +@item ENOTSOCK +The descriptor @var{socket} argument is not a socket. + +@item EOPNOTSUPP +The descriptor @var{socket} does not support this operation. + +@item EWOULDBLOCK +@var{socket} has nonblocking mode set, and there are no pending +connections immediately available. +@end table +@end deftypefun + +The @code{accept} function is not allowed for sockets using +connectionless communication styles. + +@node Who is Connected +@subsection Who is Connected to Me? + +@comment sys/socket.h +@comment BSD +@deftypefun int getpeername (int @var{socket}, struct sockaddr *@var{addr}, size_t *@var{length-ptr}) +The @code{getpeername} function returns the address of the socket that +@var{socket} is connected to; it stores the address in the memory space +specified by @var{addr} and @var{length-ptr}. It stores the length of +the address in @code{*@var{length-ptr}}. + +@xref{Socket Addresses}, for information about the format of the +address. In some operating systems, @code{getpeername} works only for +sockets in the Internet domain. + +The return value is @code{0} on success and @code{-1} on error. The +following @code{errno} error conditions are defined for this function: + +@table @code +@item EBADF +The argument @var{socket} is not a valid file descriptor. + +@item ENOTSOCK +The descriptor @var{socket} is not a socket. + +@item ENOTCONN +The socket @var{socket} is not connected. + +@item ENOBUFS +There are not enough internal buffers available. +@end table +@end deftypefun + + +@node Transferring Data +@subsection Transferring Data +@cindex reading from a socket +@cindex writing to a socket + +Once a socket has been connected to a peer, you can use the ordinary +@code{read} and @code{write} operations (@pxref{I/O Primitives}) to +transfer data. A socket is a two-way communications channel, so read +and write operations can be performed at either end. + +There are also some I/O modes that are specific to socket operations. +In order to specify these modes, you must use the @code{recv} and +@code{send} functions instead of the more generic @code{read} and +@code{write} functions. The @code{recv} and @code{send} functions take +an additional argument which you can use to specify various flags to +control the special I/O modes. For example, you can specify the +@code{MSG_OOB} flag to read or write out-of-band data, the +@code{MSG_PEEK} flag to peek at input, or the @code{MSG_DONTROUTE} flag +to control inclusion of routing information on output. + +@menu +* Sending Data:: Sending data with @code{send}. +* Receiving Data:: Reading data with @code{recv}. +* Socket Data Options:: Using @code{send} and @code{recv}. +@end menu + +@node Sending Data +@subsubsection Sending Data + +@pindex sys/socket.h +The @code{send} function is declared in the header file +@file{sys/socket.h}. If your @var{flags} argument is zero, you can just +as well use @code{write} instead of @code{send}; see @ref{I/O +Primitives}. If the socket was connected but the connection has broken, +you get a @code{SIGPIPE} signal for any use of @code{send} or +@code{write} (@pxref{Miscellaneous Signals}). + +@comment sys/socket.h +@comment BSD +@deftypefun int send (int @var{socket}, void *@var{buffer}, size_t @var{size}, int @var{flags}) +The @code{send} function is like @code{write}, but with the additional +flags @var{flags}. The possible values of @var{flags} are described +in @ref{Socket Data Options}. + +This function returns the number of bytes transmitted, or @code{-1} on +failure. If the socket is nonblocking, then @code{send} (like +@code{write}) can return after sending just part of the data. +@xref{File Status Flags}, for information about nonblocking mode. + +Note, however, that a successful return value merely indicates that +the message has been sent without error, not necessarily that it has +been received without error. + +The following @code{errno} error conditions are defined for this function: + +@table @code +@item EBADF +The @var{socket} argument is not a valid file descriptor. + +@item EINTR +The operation was interrupted by a signal before any data was sent. +@xref{Interrupted Primitives}. + +@item ENOTSOCK +The descriptor @var{socket} is not a socket. + +@item EMSGSIZE +The socket type requires that the message be sent atomically, but the +message is too large for this to be possible. + +@item EWOULDBLOCK +Nonblocking mode has been set on the socket, and the write operation +would block. (Normally @code{send} blocks until the operation can be +completed.) + +@item ENOBUFS +There is not enough internal buffer space available. + +@item ENOTCONN +You never connected this socket. + +@item EPIPE +This socket was connected but the connection is now broken. In this +case, @code{send} generates a @code{SIGPIPE} signal first; if that +signal is ignored or blocked, or if its handler returns, then +@code{send} fails with @code{EPIPE}. +@end table +@end deftypefun + +@node Receiving Data +@subsubsection Receiving Data + +@pindex sys/socket.h +The @code{recv} function is declared in the header file +@file{sys/socket.h}. If your @var{flags} argument is zero, you can +just as well use @code{read} instead of @code{recv}; see @ref{I/O +Primitives}. + +@comment sys/socket.h +@comment BSD +@deftypefun int recv (int @var{socket}, void *@var{buffer}, size_t @var{size}, int @var{flags}) +The @code{recv} function is like @code{read}, but with the additional +flags @var{flags}. The possible values of @var{flags} are described +In @ref{Socket Data Options}. + +If nonblocking mode is set for @var{socket}, and no data is available to +be read, @code{recv} fails immediately rather than waiting. @xref{File +Status Flags}, for information about nonblocking mode. + +This function returns the number of bytes received, or @code{-1} on failure. +The following @code{errno} error conditions are defined for this function: + +@table @code +@item EBADF +The @var{socket} argument is not a valid file descriptor. + +@item ENOTSOCK +The descriptor @var{socket} is not a socket. + +@item EWOULDBLOCK +Nonblocking mode has been set on the socket, and the read operation +would block. (Normally, @code{recv} blocks until there is input +available to be read.) + +@item EINTR +The operation was interrupted by a signal before any data was read. +@xref{Interrupted Primitives}. + +@item ENOTCONN +You never connected this socket. +@end table +@end deftypefun + +@node Socket Data Options +@subsubsection Socket Data Options + +@pindex sys/socket.h +The @var{flags} argument to @code{send} and @code{recv} is a bit +mask. You can bitwise-OR the values of the following macros together +to obtain a value for this argument. All are defined in the header +file @file{sys/socket.h}. + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int MSG_OOB +Send or receive out-of-band data. @xref{Out-of-Band Data}. +@end deftypevr + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int MSG_PEEK +Look at the data but don't remove it from the input queue. This is +only meaningful with input functions such as @code{recv}, not with +@code{send}. +@end deftypevr + +@comment sys/socket.h +@comment BSD +@deftypevr Macro int MSG_DONTROUTE +Don't include routing information in the message. This is only +meaningful with output operations, and is usually only of interest for +diagnostic or routing programs. We don't try to explain it here. +@end deftypevr + +@node Byte Stream Example +@subsection Byte Stream Socket Example + +Here is an example client program that makes a connection for a byte +stream socket in the Internet namespace. It doesn't do anything +particularly interesting once it has connected to the server; it just +sends a text string to the server and exits. + +@smallexample +@include inetcli.c.texi +@end smallexample + +@node Server Example +@subsection Byte Stream Connection Server Example + +The server end is much more complicated. Since we want to allow +multiple clients to be connected to the server at the same time, it +would be incorrect to wait for input from a single client by simply +calling @code{read} or @code{recv}. Instead, the right thing to do is +to use @code{select} (@pxref{Waiting for I/O}) to wait for input on +all of the open sockets. This also allows the server to deal with +additional connection requests. + +This particular server doesn't do anything interesting once it has +gotten a message from a client. It does close the socket for that +client when it detects an end-of-file condition (resulting from the +client shutting down its end of the connection). + +This program uses @code{make_socket} and @code{init_sockaddr} to set +up the socket address; see @ref{Inet Example}. + +@smallexample +@include inetsrv.c.texi +@end smallexample + +@node Out-of-Band Data +@subsection Out-of-Band Data + +@cindex out-of-band data +@cindex high-priority data +Streams with connections permit @dfn{out-of-band} data that is +delivered with higher priority than ordinary data. Typically the +reason for sending out-of-band data is to send notice of an +exceptional condition. The way to send out-of-band data is using +@code{send}, specifying the flag @code{MSG_OOB} (@pxref{Sending +Data}). + +Out-of-band data is received with higher priority because the +receiving process need not read it in sequence; to read the next +available out-of-band data, use @code{recv} with the @code{MSG_OOB} +flag (@pxref{Receiving Data}). Ordinary read operations do not read +out-of-band data; they read only the ordinary data. + +@cindex urgent socket condition +When a socket finds that out-of-band data is on its way, it sends a +@code{SIGURG} signal to the owner process or process group of the +socket. You can specify the owner using the @code{F_SETOWN} command +to the @code{fcntl} function; see @ref{Interrupt Input}. You must +also establish a handler for this signal, as described in @ref{Signal +Handling}, in order to take appropriate action such as reading the +out-of-band data. + +Alternatively, you can test for pending out-of-band data, or wait +until there is out-of-band data, using the @code{select} function; it +can wait for an exceptional condition on the socket. @xref{Waiting +for I/O}, for more information about @code{select}. + +Notification of out-of-band data (whether with @code{SIGURG} or with +@code{select}) indicates that out-of-band data is on the way; the data +may not actually arrive until later. If you try to read the +out-of-band data before it arrives, @code{recv} fails with an +@code{EWOULDBLOCK} error. + +Sending out-of-band data automatically places a ``mark'' in the stream +of ordinary data, showing where in the sequence the out-of-band data +``would have been''. This is useful when the meaning of out-of-band +data is ``cancel everything sent so far''. Here is how you can test, +in the receiving process, whether any ordinary data was sent before +the mark: + +@smallexample +success = ioctl (socket, SIOCATMARK, &result); +@end smallexample + +Here's a function to discard any ordinary data preceding the +out-of-band mark: + +@smallexample +int +discard_until_mark (int socket) +@{ + while (1) + @{ + /* @r{This is not an arbitrary limit; any size will do.} */ + char buffer[1024]; + int result, success; + + /* @r{If we have reached the mark, return.} */ + success = ioctl (socket, SIOCATMARK, &result); + if (success < 0) + perror ("ioctl"); + if (result) + return; + + /* @r{Otherwise, read a bunch of ordinary data and discard it.} + @r{This is guaranteed not to read past the mark} + @r{if it starts before the mark.} */ + success = read (socket, buffer, sizeof buffer); + if (success < 0) + perror ("read"); + @} +@} +@end smallexample + +If you don't want to discard the ordinary data preceding the mark, you +may need to read some of it anyway, to make room in internal system +buffers for the out-of-band data. If you try to read out-of-band data +and get an @code{EWOULDBLOCK} error, try reading some ordinary data +(saving it so that you can use it when you want it) and see if that +makes room. Here is an example: + +@smallexample +struct buffer +@{ + char *buffer; + int size; + struct buffer *next; +@}; + +/* @r{Read the out-of-band data from SOCKET and return it} + @r{as a `struct buffer', which records the address of the data} + @r{and its size.} + + @r{It may be necessary to read some ordinary data} + @r{in order to make room for the out-of-band data.} + @r{If so, the ordinary data is saved as a chain of buffers} + @r{found in the `next' field of the value.} */ + +struct buffer * +read_oob (int socket) +@{ + struct buffer *tail = 0; + struct buffer *list = 0; + + while (1) + @{ + /* @r{This is an arbitrary limit.} + @r{Does anyone know how to do this without a limit?} */ + char *buffer = (char *) xmalloc (1024); + struct buffer *link; + int success; + int result; + + /* @r{Try again to read the out-of-band data.} */ + success = recv (socket, buffer, sizeof buffer, MSG_OOB); + if (success >= 0) + @{ + /* @r{We got it, so return it.} */ + struct buffer *link + = (struct buffer *) xmalloc (sizeof (struct buffer)); + link->buffer = buffer; + link->size = success; + link->next = list; + return link; + @} + + /* @r{If we fail, see if we are at the mark.} */ + success = ioctl (socket, SIOCATMARK, &result); + if (success < 0) + perror ("ioctl"); + if (result) + @{ + /* @r{At the mark; skipping past more ordinary data cannot help.} + @r{So just wait a while.} */ + sleep (1); + continue; + @} + + /* @r{Otherwise, read a bunch of ordinary data and save it.} + @r{This is guaranteed not to read past the mark} + @r{if it starts before the mark.} */ + success = read (socket, buffer, sizeof buffer); + if (success < 0) + perror ("read"); + + /* @r{Save this data in the buffer list.} */ + @{ + struct buffer *link + = (struct buffer *) xmalloc (sizeof (struct buffer)); + link->buffer = buffer; + link->size = success; + + /* @r{Add the new link to the end of the list.} */ + if (tail) + tail->next = link; + else + list = link; + tail = link; + @} + @} +@} +@end smallexample + +@node Datagrams +@section Datagram Socket Operations + +@cindex datagram socket +This section describes how to use communication styles that don't use +connections (styles @code{SOCK_DGRAM} and @code{SOCK_RDM}). Using +these styles, you group data into packets and each packet is an +independent communication. You specify the destination for each +packet individually. + +Datagram packets are like letters: you send each one independently, +with its own destination address, and they may arrive in the wrong +order or not at all. + +The @code{listen} and @code{accept} functions are not allowed for +sockets using connectionless communication styles. + +@menu +* Sending Datagrams:: Sending packets on a datagram socket. +* Receiving Datagrams:: Receiving packets on a datagram socket. +* Datagram Example:: An example program: packets sent over a + datagram socket in the file namespace. +* Example Receiver:: Another program, that receives those packets. +@end menu + +@node Sending Datagrams +@subsection Sending Datagrams +@cindex sending a datagram +@cindex transmitting datagrams +@cindex datagrams, transmitting + +@pindex sys/socket.h +The normal way of sending data on a datagram socket is by using the +@code{sendto} function, declared in @file{sys/socket.h}. + +You can call @code{connect} on a datagram socket, but this only +specifies a default destination for further data transmission on the +socket. When a socket has a default destination, then you can use +@code{send} (@pxref{Sending Data}) or even @code{write} (@pxref{I/O +Primitives}) to send a packet there. You can cancel the default +destination by calling @code{connect} using an address format of +@code{AF_UNSPEC} in the @var{addr} argument. @xref{Connecting}, for +more information about the @code{connect} function. + +@comment sys/socket.h +@comment BSD +@deftypefun int sendto (int @var{socket}, void *@var{buffer}. size_t @var{size}, int @var{flags}, struct sockaddr *@var{addr}, size_t @var{length}) +The @code{sendto} function transmits the data in the @var{buffer} +through the socket @var{socket} to the destination address specified +by the @var{addr} and @var{length} arguments. The @var{size} argument +specifies the number of bytes to be transmitted. + +The @var{flags} are interpreted the same way as for @code{send}; see +@ref{Socket Data Options}. + +The return value and error conditions are also the same as for +@code{send}, but you cannot rely on the system to detect errors and +report them; the most common error is that the packet is lost or there +is no one at the specified address to receive it, and the operating +system on your machine usually does not know this. + +It is also possible for one call to @code{sendto} to report an error +due to a problem related to a previous call. +@end deftypefun + +@node Receiving Datagrams +@subsection Receiving Datagrams +@cindex receiving datagrams + +The @code{recvfrom} function reads a packet from a datagram socket and +also tells you where it was sent from. This function is declared in +@file{sys/socket.h}. + +@comment sys/socket.h +@comment BSD +@deftypefun int recvfrom (int @var{socket}, void *@var{buffer}, size_t @var{size}, int @var{flags}, struct sockaddr *@var{addr}, size_t *@var{length-ptr}) +The @code{recvfrom} function reads one packet from the socket +@var{socket} into the buffer @var{buffer}. The @var{size} argument +specifies the maximum number of bytes to be read. + +If the packet is longer than @var{size} bytes, then you get the first +@var{size} bytes of the packet, and the rest of the packet is lost. +There's no way to read the rest of the packet. Thus, when you use a +packet protocol, you must always know how long a packet to expect. + +The @var{addr} and @var{length-ptr} arguments are used to return the +address where the packet came from. @xref{Socket Addresses}. For a +socket in the file domain, the address information won't be meaningful, +since you can't read the address of such a socket (@pxref{File +Namespace}). You can specify a null pointer as the @var{addr} argument +if you are not interested in this information. + +The @var{flags} are interpreted the same way as for @code{recv} +(@pxref{Socket Data Options}). The return value and error conditions +are also the same as for @code{recv}. +@end deftypefun + +You can use plain @code{recv} (@pxref{Receiving Data}) instead of +@code{recvfrom} if you know don't need to find out who sent the packet +(either because you know where it should come from or because you +treat all possible senders alike). Even @code{read} can be used if +you don't want to specify @var{flags} (@pxref{I/O Primitives}). + +@ignore +@c sendmsg and recvmsg are like readv and writev in that they +@c use a series of buffers. It's not clear this is worth +@c supporting or that we support them. +@c !!! they can do more; it is hairy + +@comment sys/socket.h +@comment BSD +@deftp {Data Type} {struct msghdr} +@end deftp + +@comment sys/socket.h +@comment BSD +@deftypefun int sendmsg (int @var{socket}, const struct msghdr *@var{message}, int @var{flags}) +@end deftypefun + +@comment sys/socket.h +@comment BSD +@deftypefun int recvmsg (int @var{socket}, struct msghdr *@var{message}, int @var{flags}) +@end deftypefun +@end ignore + +@node Datagram Example +@subsection Datagram Socket Example + +Here is a set of example programs that send messages over a datagram +stream in the file namespace. Both the client and server programs use the +@code{make_named_socket} function that was presented in @ref{File +Namespace}, to create and name their sockets. + +First, here is the server program. It sits in a loop waiting for +messages to arrive, bouncing each message back to the sender. +Obviously, this isn't a particularly useful program, but it does show +the general ideas involved. + +@smallexample +@include filesrv.c.texi +@end smallexample + +@node Example Receiver +@subsection Example of Reading Datagrams + +Here is the client program corresponding to the server above. + +It sends a datagram to the server and then waits for a reply. Notice +that the socket for the client (as well as for the server) in this +example has to be given a name. This is so that the server can direct +a message back to the client. Since the socket has no associated +connection state, the only way the server can do this is by +referencing the name of the client. + +@smallexample +@include filecli.c.texi +@end smallexample + +Keep in mind that datagram socket communications are unreliable. In +this example, the client program waits indefinitely if the message +never reaches the server or if the server's response never comes +back. It's up to the user running the program to kill it and restart +it, if desired. A more automatic solution could be to use +@code{select} (@pxref{Waiting for I/O}) to establish a timeout period +for the reply, and in case of timeout either resend the message or +shut down the socket and exit. + +@node Inetd +@section The @code{inetd} Daemon + +We've explained above how to write a server program that does its own +listening. Such a server must already be running in order for anyone +to connect to it. + +Another way to provide service for an Internet port is to let the daemon +program @code{inetd} do the listening. @code{inetd} is a program that +runs all the time and waits (using @code{select}) for messages on a +specified set of ports. When it receives a message, it accepts the +connection (if the socket style calls for connections) and then forks a +child process to run the corresponding server program. You specify the +ports and their programs in the file @file{/etc/inetd.conf}. + +@menu +* Inetd Servers:: +* Configuring Inetd:: +@end menu + +@node Inetd Servers +@subsection @code{inetd} Servers + +Writing a server program to be run by @code{inetd} is very simple. Each time +someone requests a connection to the appropriate port, a new server +process starts. The connection already exists at this time; the +socket is available as the standard input descriptor and as the +standard output descriptor (descriptors 0 and 1) in the server +process. So the server program can begin reading and writing data +right away. Often the program needs only the ordinary I/O facilities; +in fact, a general-purpose filter program that knows nothing about +sockets can work as a byte stream server run by @code{inetd}. + +You can also use @code{inetd} for servers that use connectionless +communication styles. For these servers, @code{inetd} does not try to accept +a connection, since no connection is possible. It just starts the +server program, which can read the incoming datagram packet from +descriptor 0. The server program can handle one request and then +exit, or you can choose to write it to keep reading more requests +until no more arrive, and then exit. You must specify which of these +two techniques the server uses, when you configure @code{inetd}. + +@node Configuring Inetd +@subsection Configuring @code{inetd} + +The file @file{/etc/inetd.conf} tells @code{inetd} which ports to listen to +and what server programs to run for them. Normally each entry in the +file is one line, but you can split it onto multiple lines provided +all but the first line of the entry start with whitespace. Lines that +start with @samp{#} are comments. + +Here are two standard entries in @file{/etc/inetd.conf}: + +@smallexample +ftp stream tcp nowait root /libexec/ftpd ftpd +talk dgram udp wait root /libexec/talkd talkd +@end smallexample + +An entry has this format: + +@smallexample +@var{service} @var{style} @var{protocol} @var{wait} @var{username} @var{program} @var{arguments} +@end smallexample + +The @var{service} field says which service this program provides. It +should be the name of a service defined in @file{/etc/services}. +@code{inetd} uses @var{service} to decide which port to listen on for +this entry. + +The fields @var{style} and @var{protocol} specify the communication +style and the protocol to use for the listening socket. The style +should be the name of a communication style, converted to lower case +and with @samp{SOCK_} deleted---for example, @samp{stream} or +@samp{dgram}. @var{protocol} should be one of the protocols listed in +@file{/etc/protocols}. The typical protocol names are @samp{tcp} for +byte stream connections and @samp{udp} for unreliable datagrams. + +The @var{wait} field should be either @samp{wait} or @samp{nowait}. +Use @samp{wait} if @var{style} is a connectionless style and the +server, once started, handles multiple requests, as many as come in. +Use @samp{nowait} if @code{inetd} should start a new process for each message +or request that comes in. If @var{style} uses connections, then +@var{wait} @strong{must} be @samp{nowait}. + +@var{user} is the user name that the server should run as. @code{inetd} runs +as root, so it can set the user ID of its children arbitrarily. It's +best to avoid using @samp{root} for @var{user} if you can; but some +servers, such as Telnet and FTP, read a username and password +themselves. These servers need to be root initially so they can log +in as commanded by the data coming over the network. + +@var{program} together with @var{arguments} specifies the command to +run to start the server. @var{program} should be an absolute file +name specifying the executable file to run. @var{arguments} consists +of any number of whitespace-separated words, which become the +command-line arguments of @var{program}. The first word in +@var{arguments} is argument zero, which should by convention be the +program name itself (sans directories). + +If you edit @file{/etc/inetd.conf}, you can tell @code{inetd} to reread the +file and obey its new contents by sending the @code{inetd} process the +@code{SIGHUP} signal. You'll have to use @code{ps} to determine the +process ID of the @code{inetd} process, as it is not fixed. + +@c !!! could document /etc/inetd.sec + +@node Socket Options +@section Socket Options +@cindex socket options + +This section describes how to read or set various options that modify +the behavior of sockets and their underlying communications protocols. + +@cindex level, for socket options +@cindex socket option level +When you are manipulating a socket option, you must specify which +@dfn{level} the option pertains to. This describes whether the option +applies to the socket interface, or to a lower-level communications +protocol interface. + +@menu +* Socket Option Functions:: The basic functions for setting and getting + socket options. +* Socket-Level Options:: Details of the options at the socket level. +@end menu + +@node Socket Option Functions +@subsection Socket Option Functions + +@pindex sys/socket.h +Here are the functions for examining and modifying socket options. +They are declared in @file{sys/socket.h}. + +@comment sys/socket.h +@comment BSD +@deftypefun int getsockopt (int @var{socket}, int @var{level}, int @var{optname}, void *@var{optval}, size_t *@var{optlen-ptr}) +The @code{getsockopt} function gets information about the value of +option @var{optname} at level @var{level} for socket @var{socket}. + +The option value is stored in a buffer that @var{optval} points to. +Before the call, you should supply in @code{*@var{optlen-ptr}} the +size of this buffer; on return, it contains the number of bytes of +information actually stored in the buffer. + +Most options interpret the @var{optval} buffer as a single @code{int} +value. + +The actual return value of @code{getsockopt} is @code{0} on success +and @code{-1} on failure. The following @code{errno} error conditions +are defined: + +@table @code +@item EBADF +The @var{socket} argument is not a valid file descriptor. + +@item ENOTSOCK +The descriptor @var{socket} is not a socket. + +@item ENOPROTOOPT +The @var{optname} doesn't make sense for the given @var{level}. +@end table +@end deftypefun + +@comment sys/socket.h +@comment BSD +@deftypefun int setsockopt (int @var{socket}, int @var{level}, int @var{optname}, void *@var{optval}, size_t @var{optlen}) +This function is used to set the socket option @var{optname} at level +@var{level} for socket @var{socket}. The value of the option is passed +in the buffer @var{optval}, which has size @var{optlen}. + +The return value and error codes for @code{setsockopt} are the same as +for @code{getsockopt}. +@end deftypefun + +@node Socket-Level Options +@subsection Socket-Level Options + +@comment sys/socket.h +@comment BSD +@deftypevr Constant int SOL_SOCKET +Use this constant as the @var{level} argument to @code{getsockopt} or +@code{setsockopt} to manipulate the socket-level options described in +this section. +@end deftypevr + +@pindex sys/socket.h +Here is a table of socket-level option names; all are defined in the +header file @file{sys/socket.h}. + +@table @code +@comment sys/socket.h +@comment BSD +@item SO_DEBUG +@c Extra blank line here makes the table look better. + +This option toggles recording of debugging information in the underlying +protocol modules. The value has type @code{int}; a nonzero value means +``yes''. +@c !!! should say how this is used +@c Ok, anyone who knows, please explain. + +@comment sys/socket.h +@comment BSD +@item SO_REUSEADDR +This option controls whether @code{bind} (@pxref{Setting Address}) +should permit reuse of local addresses for this socket. If you enable +this option, you can actually have two sockets with the same Internet +port number; but the system won't allow you to use the two +identically-named sockets in a way that would confuse the Internet. The +reason for this option is that some higher-level Internet protocols, +including FTP, require you to keep reusing the same socket number. + +The value has type @code{int}; a nonzero value means ``yes''. + +@comment sys/socket.h +@comment BSD +@item SO_KEEPALIVE +This option controls whether the underlying protocol should +periodically transmit messages on a connected socket. If the peer +fails to respond to these messages, the connection is considered +broken. The value has type @code{int}; a nonzero value means +``yes''. + +@comment sys/socket.h +@comment BSD +@item SO_DONTROUTE +This option controls whether outgoing messages bypass the normal +message routing facilities. If set, messages are sent directly to the +network interface instead. The value has type @code{int}; a nonzero +value means ``yes''. + +@comment sys/socket.h +@comment BSD +@item SO_LINGER +This option specifies what should happen when the socket of a type +that promises reliable delivery still has untransmitted messages when +it is closed; see @ref{Closing a Socket}. The value has type +@code{struct linger}. + +@comment sys/socket.h +@comment BSD +@deftp {Data Type} {struct linger} +This structure type has the following members: + +@table @code +@item int l_onoff +This field is interpreted as a boolean. If nonzero, @code{close} +blocks until the data is transmitted or the timeout period has expired. + +@item int l_linger +This specifies the timeout period, in seconds. +@end table +@end deftp + +@comment sys/socket.h +@comment BSD +@item SO_BROADCAST +This option controls whether datagrams may be broadcast from the socket. +The value has type @code{int}; a nonzero value means ``yes''. + +@comment sys/socket.h +@comment BSD +@item SO_OOBINLINE +If this option is set, out-of-band data received on the socket is +placed in the normal input queue. This permits it to be read using +@code{read} or @code{recv} without specifying the @code{MSG_OOB} +flag. @xref{Out-of-Band Data}. The value has type @code{int}; a +nonzero value means ``yes''. + +@comment sys/socket.h +@comment BSD +@item SO_SNDBUF +This option gets or sets the size of the output buffer. The value is a +@code{size_t}, which is the size in bytes. + +@comment sys/socket.h +@comment BSD +@item SO_RCVBUF +This option gets or sets the size of the input buffer. The value is a +@code{size_t}, which is the size in bytes. + +@comment sys/socket.h +@comment GNU +@item SO_STYLE +@comment sys/socket.h +@comment BSD +@itemx SO_TYPE +This option can be used with @code{getsockopt} only. It is used to +get the socket's communication style. @code{SO_TYPE} is the +historical name, and @code{SO_STYLE} is the preferred name in GNU. +The value has type @code{int} and its value designates a communication +style; see @ref{Communication Styles}. + +@comment sys/socket.h +@comment BSD +@item SO_ERROR +@c Extra blank line here makes the table look better. + +This option can be used with @code{getsockopt} only. It is used to reset +the error status of the socket. The value is an @code{int}, which represents +the previous error status. +@c !!! what is "socket error status"? this is never defined. +@end table + +@node Networks Database +@section Networks Database +@cindex networks database +@cindex converting network number to network name +@cindex converting network name to network number + +@pindex /etc/networks +@pindex netdb.h +Many systems come with a database that records a list of networks known +to the system developer. This is usually kept either in the file +@file{/etc/networks} or in an equivalent from a name server. This data +base is useful for routing programs such as @code{route}, but it is not +useful for programs that simply communicate over the network. We +provide functions to access this data base, which are declared in +@file{netdb.h}. + +@comment netdb.h +@comment BSD +@deftp {Data Type} {struct netent} +This data type is used to represent information about entries in the +networks database. It has the following members: + +@table @code +@item char *n_name +This is the ``official'' name of the network. + +@item char **n_aliases +These are alternative names for the network, represented as a vector +of strings. A null pointer terminates the array. + +@item int n_addrtype +This is the type of the network number; this is always equal to +@code{AF_INET} for Internet networks. + +@item unsigned long int n_net +This is the network number. Network numbers are returned in host +byte order; see @ref{Byte Order}. +@end table +@end deftp + +Use the @code{getnetbyname} or @code{getnetbyaddr} functions to search +the networks database for information about a specific network. The +information is returned in a statically-allocated structure; you must +copy the information if you need to save it. + +@comment netdb.h +@comment BSD +@deftypefun {struct netent *} getnetbyname (const char *@var{name}) +The @code{getnetbyname} function returns information about the network +named @var{name}. It returns a null pointer if there is no such +network. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct netent *} getnetbyaddr (long @var{net}, int @var{type}) +The @code{getnetbyaddr} function returns information about the network +of type @var{type} with number @var{net}. You should specify a value of +@code{AF_INET} for the @var{type} argument for Internet networks. + +@code{getnetbyaddr} returns a null pointer if there is no such +network. +@end deftypefun + +You can also scan the networks database using @code{setnetent}, +@code{getnetent}, and @code{endnetent}. Be careful in using these +functions, because they are not reentrant. + +@comment netdb.h +@comment BSD +@deftypefun void setnetent (int @var{stayopen}) +This function opens and rewinds the networks database. + +If the @var{stayopen} argument is nonzero, this sets a flag so that +subsequent calls to @code{getnetbyname} or @code{getnetbyaddr} will +not close the database (as they usually would). This makes for more +efficiency if you call those functions several times, by avoiding +reopening the database for each call. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun {struct netent *} getnetent (void) +This function returns the next entry in the networks database. It +returns a null pointer if there are no more entries. +@end deftypefun + +@comment netdb.h +@comment BSD +@deftypefun void endnetent (void) +This function closes the networks database. +@end deftypefun -- cgit v1.1