aboutsummaryrefslogtreecommitdiff
path: root/timezone
AgeCommit message (Collapse)AuthorFilesLines
2017-06-16Update timezone code from tzcode 2017b.Joseph Myers6-615/+864
This patch updates files coming from tzcode to the versions in tzcode 2017b. A couple of changes to other glibc code are needed. time/tzset.c was using the SECSPERDAY macro from tzfile.h, which no longer defines that macro, so a local definition is added to tzset.c. Because timezone/private.h now defines the _ macro whenever HAVE_GETTEXT is true, even if it was previously defined, it is also necessary to avoid a conflict with the definition in include/libintl.h. Defining _ISOMAC is the obvious way to avoid such internal definitions being visible, together with defining TZ_DOMAIN so that zic and zdump continue to get the messages from the libc domain as desired. However, zic and zdump rely on PKGVERSION and REPORT_BUGS_TO from config.h, which is not included by default with _ISOMAC, so -include config.h needs adding to the options for these programs as well. Together those changes allow unmodified tzcode 2017b sources to work in glibc. Tested for x86_64. * timezone/private.h: Update from tzcode 2017b. * timezone/tzfile.h: Likewise. * timezone/tzselect.ksh: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise. * timezone/Makefile (tz-cflags): Add -D_ISOMAC -DTZ_DOMAIN='"libc"' -include $(common-objpfx)config.h. * time/tzset.c (SECSPERDAY): New macro.
2017-06-07Fix tst-timezone race (bug 14096).Joseph Myers1-0/+1
I observed a failure of timezone/tst-timezone with the same symptoms as reported in bug 14096. I was unable to reproduce the failure on testing again. However, from inspection, the cause is as follows. tst-timezone uses time zones compiled from the northamerica file, but has no dependency on any such zones, so with a parallel build it is possible that they do not get compiled until after tst-timezone is run. This patch adds a dependency on the compiled America/New_York zone (the one used as a makefile target to cause such zones to be compiled, rather than one which is actually used in that test) to fix the race. Tested for x86_64. [BZ #14096] * timezone/Makefile ($(objpfx)tst-timezone.out): Depend on America/New_York.
2017-02-16Add missing header files throughout the testsuite.Zack Weinberg1-0/+1
* crypt/md5.h: Test _LIBC with #if defined, not #if. * dirent/opendir-tst1.c: Include sys/stat.h. * dirent/tst-fdopendir.c: Include sys/stat.h. * dirent/tst-fdopendir2.c: Include stdlib.h. * dirent/tst-scandir.c: Include stdbool.h. * elf/tst-auditmod1.c: Include link.h and stddef.h. * elf/tst-tls15.c: Include stdlib.h. * elf/tst-tls16.c: Include stdlib.h. * elf/tst-tls17.c: Include stdlib.h. * elf/tst-tls18.c: Include stdlib.h. * iconv/tst-iconv6.c: Include endian.h. * iconvdata/bug-iconv11.c: Include limits.h. * io/test-utime.c: Include stdint.h. * io/tst-faccessat.c: Include sys/stat.h. * io/tst-fchmodat.c: Include sys/stat.h. * io/tst-fchownat.c: Include sys/stat.h. * io/tst-fstatat.c: Include sys/stat.h. * io/tst-futimesat.c: Include sys/stat.h. * io/tst-linkat.c: Include sys/stat.h. * io/tst-mkdirat.c: Include sys/stat.h and stdbool.h. * io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h. * io/tst-mknodat.c: Include sys/stat.h and stdbool.h. * io/tst-openat.c: Include stdbool.h. * io/tst-readlinkat.c: Include sys/stat.h. * io/tst-renameat.c: Include sys/stat.h. * io/tst-symlinkat.c: Include sys/stat.h. * io/tst-unlinkat.c: Include stdbool.h. * libio/bug-memstream1.c: Include stdlib.h. * libio/bug-wmemstream1.c: Include stdlib.h. * libio/tst-fwrite-error.c: Include stdlib.h. * libio/tst-memstream1.c: Include stdlib.h. * libio/tst-memstream2.c: Include stdlib.h. * libio/tst-memstream3.c: Include stdlib.h. * malloc/tst-interpose-aux.c: Include stdint.h. * misc/tst-preadvwritev-common.c: Include sys/stat.h. * nptl/tst-basic7.c: Include limits.h. * nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h. * nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h. * nptl/tst-cancel4_1.c: Include stddef.h. * nptl/tst-cancel4_2.c: Include stddef.h. * nptl/tst-cond16.c: Include limits.h. Use sysconf(_SC_PAGESIZE) instead of __getpagesize. * nptl/tst-cond18.c: Include limits.h. Use sysconf(_SC_PAGESIZE) instead of __getpagesize. * nptl/tst-cond4.c: Include stdint.h. * nptl/tst-cond6.c: Include stdint.h. * nptl/tst-stack2.c: Include limits.h. * nptl/tst-stackguard1.c: Include stddef.h. * nptl/tst-tls4.c: Include stdint.h. Don't include tls.h. * nptl/tst-tls4moda.c: Include stddef.h. Don't include stdio.h, unistd.h, or tls.h. * nptl/tst-tls4modb.c: Include stddef.h. Don't include stdio.h, unistd.h, or tls.h. * nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h. * posix/tst-getaddrinfo2.c: Include stdio.h. * posix/tst-getaddrinfo5.c: Include stdio.h. * posix/tst-pathconf.c: Include sys/stat.h. * posix/tst-posix_fadvise-common.c: Include stdint.h. * posix/tst-preadwrite-common.c: Include sys/stat.h. * posix/tst-regex.c: Include stdint.h. Don't include spawn.h or spawn_int.h. * posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h. * posix/tst-vfork3.c: Include sys/stat.h. * resolv/tst-bug18665-tcp.c: Include stdlib.h. * resolv/tst-res_hconf_reorder.c: Include stdlib.h. * resolv/tst-resolv-search.c: Include stdlib.h. * stdio-common/tst-fmemopen2.c: Include stdint.h. * stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h. * stdlib/test-canon.c: Include sys/stat.h. * stdlib/tst-tls-atexit.c: Include stdbool.h. * string/test-memchr.c: Include stdint.h. * string/tst-cmp.c: Include stdint.h. * sysdeps/pthread/tst-timer.c: Include stdint.h. * sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h. * sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h. * sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h. Don't include init-arch.h. * sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h. Don't include init-arch.h. * sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h. * sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h. * sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h. * sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h. * sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h. * sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h. * sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h. * time/clocktest.c: Include stdint.h. * time/tst-posixtz.c: Include stdint.h. * timezone/tst-timezone.c: Include stdint.h.
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers3-3/+3
2016-03-14Remove mention of checktab.awk in timezone/README.Carlos O'Donell1-2/+3
2016-03-10Removed unused timezone/checktab.awk.Carlos O'Donell1-174/+0
2016-01-11Force rereading TZDEFRULES after it was used to set DST rules only (bug #19253)Andreas Schwab1-1/+4
If the TZDEFRULES file was used to set the DST rules when $TZ didn't provide any we need to make sure that the next time it is used we recompute everything as __tzfile_default changes some setting from what is provided by TZDEFRULES.
2016-01-07Update timezone code from tzcode 2015g.Paul Eggert9-918/+1456
This patch updates the timezone code from tzcode 2015g. The Makefile and README changes are based on those in Paul's patch <https://sourceware.org/ml/libc-alpha/2015-05/msg00553.html>. Tested for x86_64 and x86. 2016-01-06 Paul Eggert <eggert@cs.ucla.edu> Joseph Myers <joseph@codesourcery.com> * timezone/private.h: Update from tzcode 2015g. * timezone/tzfile.h: Likewise. * timezone/tzselect.ksh: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise. * timezone/ialloc.c: Remove file. * timezone/scheck.c: Likewise. * timezone/Makefile (extra-objs): Remove variable. ($(objpfx)zic): Do not depend on scheck.o and ialloc.o. (tz-cflags): Add -DHAVE_GETTEXT -DUSE_LTZ=0 -Wno-maybe-uninitialized. (CFLAGS-zdump.c): Remove -fwrapv -DNOID -DHAVE_GETTEXT. (CFLAGS-zic.c): Remove -DNOID -DHAVE_GETTEXT. (CFLAGS-ialloc.c): Remove variable. (CFLAGS-scheck.c): Likewise. * timezone/README: Update list of files from tzcode.
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers3-3/+3
2015-10-07 Update timezone/Makefile to use -Wno-unused-variableSteve Ellcey1-3/+6
GCC 6.0 (prelease) complains about time_t_min and time_t_max not being used. These variables are not used in glibc but are needed in other packages. * timezone/Makefile (CFLAGS-zic.c): Add -Wno-unused-variable. (CFLAGS-ialloc.c): Ditto. (CFLAGS-scheck.c): Ditto.
2015-09-18timezone: add a configure flag to disable program installMike Frysinger1-3/+5
Some distros build+install the timezone tools (zic/zdump/tzselect) outside of glibc and use the upstream package directly. Add a configure flag to glibc so they can disable install of those tools. This allows tests to run & pass regardless of the configure flag. Only the install of them is impacted.
2015-09-18Revert timezone/Makefile change.Joseph Myers1-6/+4
This change breaks the build with all released versions of GCC. * timezone/Makefile: Revert previous change.
2015-09-18Undo build error fixes to timezone/private.h, change makefile instead toWilco Dijkstra2-4/+16
ignore the errors. 2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> * timezone/Makefile: Ignore unused variable errors due to private.h (time_t_min) and (time_t_max). * timezone/private.h (time_t_min): Revert removal. (time_t_max): Likewise.
2015-09-18timezone: fix parallel check failuresMike Frysinger1-0/+1
The XT testdata install rules expect the testdata dir to already exist in the build tree, but it doesn't actually create it. Instead, it relies on the build-testdata define happening to be executed before it (which runs zic which creates the dir). When we run in parallel though, it's easy to hit a failure: $ cd timezone $ rm -rf $objdir/timezone/testdata $ make check -j ... cp testdata/XT1 .../timezone/testdata/XT1 cp: cannot create regular file '.../timezone/testdata/XT1': No such file or directory Makefile:116: recipe for target '.../timezone/testdata/XT1' failed make: *** [.../timezone/testdata/XT1] Error 1 make: *** Waiting for unfinished jobs....
2015-09-18Fix several build failures with GCC6 due to unused static variables.Wilco Dijkstra1-10/+0
2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> * resolv/base64.c (rcsid): Remove unused static. * sysdeps/ieee754/dbl-64/atnat2.h (qpi1): Remove unused static. (tqpi1): Likewise. * sysdeps/ieee754/dbl-64/uexp.h (one): Likewise. * sysdeps/ieee754/dbl-64/upow.h (sqrt_2): Likewise. * sysdeps/ieee754/flt-32/e_log10f.c (one): Likewise. * sysdeps/ieee754/flt-32/s_cosf.c (one): Likewise. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (zero): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (half): Likewise. * sysdeps/ieee754/ldbl-128/s_log1pl.c (maxlog): Likewise. * timezone/private.h (time_t_min): Likewise. (time_t_max): Likewise.
2015-08-20Don't use -Wno-strict-prototypes in timezone/.Joseph Myers1-5/+4
The current timezone/ code from tzcode doesn't need -Wno-strict-prototypes. This patch removes it from the CFLAGS settings in timezone/Makefile. Tested for x86_64 that glibc still builds OK with the patch applied. * timezone/Makefile (CFLAGS-zdump.c): Remove -Wno-strict-prototypes. (CFLAGS-zic.c): Likewise. (CFLAGS-ialloc.c): Likewise. (CFLAGS-scheck.c): Likewise.
2015-08-09Remove unused variables from timezone/MakefileAndreas Schwab1-9/+0
2015-08-06Modify several tests to use test-skeleton.cArjun Shankar1-2/+5
These tests were skipped by the use-test-skeleton conversion done in commit 29955b5d because they did not have an `int main (void)' declaration. Instead their `main' functions were declared with arguments (i.e. argc, argv) even though they didn't use them. Remove these arguments and include the test skeleton in these tests.
2015-07-15tst-tzset: raise timeout to 5 secondsMike Frysinger1-0/+1
This test is reliably taking 2.3 seconds on my system, and the default is 2 seconds, so it always times out. Bump it up to 5 seconds instead.
2015-06-19Fix timezone tests run in parallel.Stefan Liebler1-0/+6
The Makefile rule is called one time for target %/UTC or %/Universal. If the tests are run in parallel, UTC or Universal can trigger the rule. This patch patch generates the second test-result file as a copy of the generated one. Thus the testsuite can rely on the existence of the test-result files regardless of which target has triggered the rule. ChangeLog: * timezone/Makefile (%/UTC %/Universal): Generate test-result files for UTC and Universal.
2015-04-24Make time zone file parser more robust [BZ #17715]Florian Weimer7-1/+208
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers2-2/+2
2014-12-30Replace %ld with %jd and cast to intmax_tH.J. Lu1-4/+4
2014-09-30Allow cross-building of testsWill Newton1-0/+2
Allow building tests in a cross configuration without a test wrapper defined. This is helpful for doing simple build testing of tests. ChangeLog: 2014-09-30 Will Newton <will.newton@linaro.org> * localedata/Makefile: Move assignment to tests-special into an ifdef testing run-built-tests. * timezone/Makefile: Likewise.
2014-08-21Remove redundant CPPFLAGS for some programsSiddhesh Poyarekar1-2/+0
These programs get the NOT_IN_libc twice, once through the 'other' target and another explicitly. Remove the explicitly added CPFLAG. * catgets/Makefile (CPPFLAGS-gencat): Remove. * iconv/Makefile (CPPFLAGS-iconv_prog): Likewise. (CPPFLAGS-iconvconfig): Likewise. * timezone/Makefile (CPPFLAGS-zic): Likewise.
2014-06-25Update timezone code from tzcode 2014e.Joseph Myers5-84/+139
This patch updates the timezone code from tzcode 2014e (the previous version used was 2013i). Tested x86_64. * timezone/checktab.awk: Update from tzcode 2014e. * timezone/private.h: Likewise. * timezone/tzfile.h: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise.
2014-06-07Remove redundant C locale settings.Joseph Myers1-2/+1
Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
2014-06-06Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers1-2/+2
consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-05-16Fix variable used in sed expression in timezone/MakefileAllan McRae1-1/+1
2014-05-13tzselect: use zonedir instead of current working directorySami Kerola1-1/+1
2014-03-07Count miscellaneous files built on host for testing as tests.Joseph Myers1-2/+10
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I raised the question of counting miscellaneous dependencies of tests, built on the host rather than the build system, as tests, so that when test failures don't stop "make check" neither do those other builds on the host, so that a flaky host doesn't stop "make check" from producing a complete summary of test results. Brooks supported that idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>. This patch implements that change for all the examples I could find: one message catalog in catgets/, locales in localedata/ and timezone files in timezone/. Tested x86_64. * catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat. ($(objpfx)sample.SJIS.cat): Use $(evaluate-test). * timezone/Makefile (testdata): Move definition above include of Rules. (test-zones): New variable. (tests-special): Add zone files. (build-testdata): Use $(evaluate-test). localedata/ChangeLog: * Makefile (LOCALES): Move definition above include of Rules. (LOCALE_SRCS): Likewise. (CHARMAPS): Likewise. (CTYPE_FILES): Likewise. (tests-special): Add locale files. ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
2014-02-28Fix fallout from Joseph's untested Makeconfig change.Roland McGrath1-2/+2
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers1-4/+2
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-08tzselect: stop requiring kshMike Frysinger2-3/+1
This script works fine under bash (which we already require), so drop the legacy ksh munging. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae2-2/+2
2013-12-20Update timezone code from tzcode 2013i.Joseph Myers7-480/+1064
Now we have Paul's support for version-3 tz files checked in, this patch updates all the code we take (unmodified) from tzcode to version 2013i (which includes the support for generating version-3 tz files where necessary). Tested x86_64. * timezone/checktab.awk: Update from tzcode 2013i. * timezone/private.h: Likewise. * timezone/scheck.c: Likewise. * timezone/tzfile.h: Likewise. * timezone/tzselect.ksh: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise.
2013-03-13Update zic from tzcode 2013b.Joseph Myers1-2/+4
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers2-2/+2
2012-11-13Update tzcode from upstream git and support --with-bugurl for it.Joseph Myers4-14/+18
2012-11-10Use glibc version information in zic and zdump.Joseph Myers3-4/+8
2012-11-09Use unmodified tzselect.ksh in glibc.Joseph Myers3-7/+8
2012-11-09Update tzcode to 2012i.Joseph Myers10-463/+224
2012-04-25Update zdump and zic from tzcode 2012b.Joseph Myers3-12/+75
2012-03-21Do not install iso3166.tab and zone.tabAllan McRae1-5/+0
2012-03-21 Allan McRae <allan@archlinux.org> * timezone/Makefile: Do not install iso3166.tab and zone.tab
2012-03-07Remove distribute variable from MakefilesUlrich Drepper1-7/+2
2012-03-07Don't install timezone rule filesUlrich Drepper1-101/+1
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert2-6/+4
2009-06-15Update from tzcode2009i.Ulrich Drepper3-22/+52
2009-06-15Update timezone data from tzdata2009i.Ulrich Drepper19-95/+645
2008-10-01* timezone/africa: Update from tzdata2008f.Ulrich Drepper8-73/+517
* timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/europe: Likewise. * timezone/leapseconds: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise.