Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
|
|
We can't relocate entries in dynamic section if it is readonly:
1. Add a l_ld_readonly field to struct link_map to indicate if dynamic
section is readonly and set it based on p_flags of PT_DYNAMIC segment.
2. Replace DL_RO_DYN_SECTION with dl_relocate_ld to decide if dynamic
section should be relocated.
3. Remove DL_RO_DYN_TEMP_CNT.
4. Don't use a static dynamic section to make readonly dynamic section
in vDSO writable.
5. Remove the temp argument from elf_get_dynamic_info.
This fixes BZ #28340.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Testing for powerpc shows some of the new narrowing div/mul tests need
XFAILing for IBM long double and some ULPs updates are needed for
those tests.
|
|
As described in bug 28358, the round-to-odd computations used in the
libm functions that round their results to a narrower format can yield
spurious underflow exceptions in the following circumstances: the
narrowing only narrows the precision of the type and not the exponent
range (i.e., it's narrowing _Float128 to _Float64x on x86_64, x86 or
ia64), the architecture does after-rounding tininess detection (which
applies to all those architectures), the result is inexact, tiny
before rounding but not tiny after rounding (with the chosen rounding
mode) for _Float64x (which is possible for narrowing mul, div and fma,
not for narrowing add, sub or sqrt), so the underflow exception
resulting from the toward-zero computation in _Float128 is spurious
for _Float64x.
Fixed by making ROUND_TO_ODD call feclearexcept (FE_UNDERFLOW) in the
problem cases (as indicated by an extra argument to the macro); there
is never any need to preserve underflow exceptions from this part of
the computation, because the conversion of the round-to-odd value to
the narrower type will underflow in exactly the cases in which the
function should raise that exception, but it may be more efficient to
avoid the extra manipulation of the floating-point environment when
not needed.
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
|
pthread_mutexattr_setrobust_np (bug 28036)
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Recent binutils commit b25f942e18d6ecd7ec3e2d2e9930eb4f996c258a
changes the behavior of `.machine` directives to override, rather
than augment, the base CPU. This can result in _reduced_ functionality
when, for example, compiling for default machine "power8", but explicitly
asking for ".machine power5", which loses Altivec instructions.
In tst-ucontext-ppc64-vscr.c, while the instructions provoking the new
error messages are bracketed by ".machine power5", which is ostensibly
Power ISA 2.03 (POWER5), the POWER5 processor did not support the
VSX subset, so these instructions are not recognized as "power5".
Error: unrecognized opcode: `vspltisb'
Error: unrecognized opcode: `vpkuwus'
Error: unrecognized opcode: `mfvscr'
Error: unrecognized opcode: `stvx'
Manually adding the VSX subset via ".machine altivec" is sufficient.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
The fix for bug 19193 breaks some old applications which appear
to use pthread_kill to probe if a thread is still running, something
that is not supported by POSIX.
|
|
Glibc does not provide an interface for debugger to access libraries
loaded in multiple namespaces via dlmopen.
The current rtld-debugger interface is described in the file:
elf/rtld-debugger-interface.txt
under the "Standard debugger interface" heading. This interface only
provides access to the first link-map (LM_ID_BASE).
1. Bump r_version to 2 when multiple namespaces are used. This triggers
the GDB bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=28236
2. Add struct r_debug_extended to extend struct r_debug into a linked-list,
where each element correlates to an unique namespace.
3. Initialize the r_debug_extended structure. Bump r_version to 2 for
the new namespace and add the new namespace to the namespace linked list.
4. Add _dl_debug_update to return the address of struct r_debug' of a
namespace.
5. Add a hidden symbol, _r_debug_extended, for struct r_debug_extended.
6. Provide the symbol, _r_debug, with size of struct r_debug, as an alias
of _r_debug_extended, for programs which reference _r_debug.
This fixes BZ #15971.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all
support for !THREAD_GSCOPE_IN_TCB, along with the definition itself.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-4-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
This is a new implementation of GSCOPE which largely mirrors its NPTL
counterpart. Same as in NPTL, instead of a global flag shared between
threads, there is now a per-thread GSCOPE flag stored in each thread's
TCB. This makes entering and exiting a GSCOPE faster at the expense of
making THREAD_GSCOPE_WAIT () slower.
The largest win is the elimination of many redundant gsync_wake () RPC
calls; previously, even simplest programs would make dozens of fully
redundant gsync_wake () calls.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-3-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
The next commit is going to introduce a new implementation of
THREAD_GSCOPE_WAIT which needs to access the list of threads.
Since it must be usable from the dynamic laoder, we have to move
the symbols for the list of threads into the loader.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-2-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
include/math.h has a mechanism to redirect internal calls to various
libm functions, that can often be inlined by the compiler, to call
non-exported __* names for those functions in the case when the calls
aren't inlined, with the redirection being disabled when
NO_MATH_REDIRECT. Add fma to the functions to which this mechanism is
applied.
At present, libm-internal fma calls (generally to __builtin_fma*
functions) are only done when it's known the call will be inlined,
with alternative code not relying on an fma operation being used in
the caller otherwise. This patch is in preparation for adding the TS
18661 / C2X narrowing fma functions to glibc; it will be natural for
the narrowing function implementations to call the underlying fma
functions unconditionally, with this either being inlined or resulting
in an __fma* call. (Using two levels of round-to-odd computation like
that, in the case where there isn't an fma hardware instruction, isn't
optimal but is certainly a lot simpler for the initial implementation
than writing different narrowing fma implementations for all the
various pairs of formats.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch (using
<https://sourceware.org/pipermail/libc-alpha/2021-September/130991.html>
to fix installed library stripping in build-many-glibcs.py). Also
tested for x86_64.
|
|
0 was actually LLL_PRIVATE, so this does not actually change the code.
|
|
While originally this definition was indeed used to distinguish between
the cases where the GSCOPE flag was stored in TCB or not, it has since
become used as a general way to distinguish between HTL and NPTL.
THREAD_GSCOPE_IN_TCB will be removed in the following commits, as HTL,
which currently is the only port that does not put the flag into TCB,
will get ported to put the GSCOPE flag into the TCB as well. To prepare
for that change, migrate all code that wants to distinguish between HTL
and NPTL to use PTHREAD_IN_LIBC instead, which is a better choice since
the distinction mostly has to do with whether libc has access to the
list of thread structures and therefore can initialize thread-local
storage.
The parts of code that actually depend on whether the GSCOPE flag is in
TCB are left unchanged.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210907133325.255690-2-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
bits/mman-linux.h
Linux 5.14 adds constants MADV_POPULATE_READ and MADV_POPULATE_WRITE
(with the same values on all architectures). Add these to glibc's
bits/mman-linux.h.
Tested for x86_64.
|
|
This patch updates the kernel version in the test tst-mman-consts.py
to 5.14. (There are no new MAP_* constants covered by this test in
5.14 that need any other header changes.)
Tested with build-many-glibcs.py.
|
|
A new thread exit lock and flag are introduced. They are used to
detect that the thread is about to exit or has exited in
__pthread_kill_internal, and the signal is not sent in this case.
The test sysdeps/pthread/tst-pthread_cancel-select-loop.c is derived
from a downstream test originally written by Marek Polacek.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This closes one remaining race condition related to bug 12889: if
the thread already exited on the kernel side, returning ESRCH
is not correct because that error is reserved for the thread IDs
(pthread_t values) whose lifetime has ended. In case of a
kernel-side exit and a valid thread ID, no signal needs to be sent
and cancellation does not have an effect, so just return 0.
sysdeps/pthread/tst-kill4.c triggers undefined behavior and is
removed with this commit.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
|
|
Linux 5.14 has two new syscalls, memfd_secret (on some architectures
only) and quotactl_fd. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
|
|
{f,l,}xstat stub for MIPS is using INTERNAL_SYSCALL
to do xstat syscall for glibc ver, However it leaves
errno untouched and thus giving bad errno output.
Setup errno properly when syscall returns non-zero.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
This patch updates unroll8 code so as not to degrade at the peak
performance 16KB for both FX1000 and FX700.
Inserted 2 instructions at the beginning of the unroll8 loop,
cmp and branch, are a workaround that is found heuristically.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
Because of wrong commit author. Will recommit it with right author.
This reverts commit 23777232c23f80809613bdfa329f63aadf992922.
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
This patch updates unroll8 code so as not to degrade at the peak
performance 16KB for both FX1000 and FX700.
Inserted 2 instructions at the beginning of the unroll8 loop,
cmp and branch, are a workaround that is found heuristically.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
When using LLD (LLVM linker) as the linker, configure prints a confusing
message.
*** These critical programs are missing or too old: GNU ld
LLD>=13.0.0 can build glibc --enable-static-pie. (8.0.0 needs one
workaround for -Wl,-defsym=_begin=0. 9.0.0 works with
--disable-static-pie).
XFAIL two tests sysdeps/x86/tst-ifunc-isa-* which have the BZ #28154
issue (LLD follows the PowerPC port of GNU ld for ifunc by placing
IRELATIVE relocations in .rela.dyn, triggering a glibc ifunc fragility).
The set of dynamic symbols is the same with GNU ld and LLD,
modulo unused SHN_ABS version node symbols.
For comparison, gold does not support --enable-static-pie
yet (--no-dynamic-linker is unsupported BZ #22221), yet
has 6 failures more than LLD. gold linked libc.so has
larger .dynsym differences with GNU ld and LLD
(non-default version symbols are changed to default versions
by a version script BZ #28196).
|
|
MS_SYNC is actually 0, so we cannot test that both MS_SYNC and MS_ASYNC
are set.
|
|
== has higher priority than &
|
|
Use testl, instead of andl, to check __x86_string_control to avoid
updating __x86_string_control.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
On i686, there is no multiarch memove in libc.a, don't include multiarch
memove in ifunc-impl-list.c in libc.a.
|
|
posix/tst-spawn5 (BZ #28260)
It ensures a continuous range of file descriptor and avoid hitting
the RLIMIT_NOFILE.
Checked on x86_64-linux-gnu.
|
|
LLD doesn't support --{,no-}tls-get-addr-optimize.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
The minimum GNU binutils requirement is 2.25 which supports AVX512DQ.
Remove assembler AVX512DQ check.
|
|
The minimum GCC requirement is GCC 6.2 which supports -mavx512f. Remove
compiler -mavx512f check. Tested with GCC 6.4.1 on Linux/x86-64.
|
|
This is not referenced any more and includes a non-existing file.
|
|
Optimize loads of all bits set into ZMM register in AVX512 SVML codes
by replacing
vpbroadcastq .L_2il0floatpacket.16(%rip), %zmmX
and
vmovups .L_2il0floatpacket.13(%rip), %zmmX
with
vpternlogd $0xff, %zmmX, %zmmX, %zmmX
This fixes BZ #28252.
|
|
The Autoconf documentation for the AC_CACHE_CHECK macro states:
The commands-to-set-it must have no side effects except for setting
the variable cache-id, see below.
However, the tests for support of -msahf and -mmovbe were embedded in
the commands-to-set-it for lib_cv_include_x86_isa_level. This had the
consequence that libc_cv_have_x86_lahf_sahf and libc_cv_have_x86_movbe
were not defined whenever lib_cv_include_x86_isa_level was read from
cache. These variables' being undefined meant that their unquoted use
in later test expressions led to the 'test' built-in's misparsing its
arguments and emitting errors like "test: =: unexpected operator" or
"test: =: unary operator expected", depending on the particular shell.
This commit refactors the tests for LAHF/SAHF and MOVBE instruction
support into their own AC_CACHE_CHECK macro invocations to obey the
rule that the commands-to-set-it must have no side effects other than
setting the variable named by cache-id.
Signed-off-by: Matt Whitlock <sourceware@mattwhitlock.name>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
and drop reliance on _GLOBAL_OFFSET_TABLE_[0] being the link-time
address of _DYNAMIC. &__ehdr_start is a better way to get the load address.
This is similar to commits b37b75d269883a2c553bb7019a813094eb4e2dd1
(x86-64) and 43d06ed218fc8be58987bdfd00e21e5720f0b862 (aarch64).
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
|
|
&__ehdr_start is a better way to get the load address.
This is similar to commits b37b75d269883a2c553bb7019a813094eb4e2dd1
(x86-64) and 43d06ed218fc8be58987bdfd00e21e5720f0b862 (aarch64).
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now
that we have migrated to __thread and tls_model attributes, these macros
are unused and the tls-macros.h files can retire.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
and drop reliance on _GLOBAL_OFFSET_TABLE_[0] being the link-time
address of _DYNAMIC. &__ehdr_start is a better way to get the load address.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
#28152] [BZ #28205]
elf/tls-macros.h was added for TLS testing when GCC did not support
__thread. __thread and tls_model attributes are mature now and have been
used by many newer tests.
Also delete tst-tls2.c which tests .tls_common (unused by modern GCC and
unsupported by Clang/LLD). .tls_common and .tbss definition are almost
identical after linking, so the runtime test doesn't add additional
coverage. Assembler and linker tests should be on the binutils side.
When LLD 13.0.0 is allowed in configure.ac
(https://sourceware.org/pipermail/libc-alpha/2021-August/129866.html),
`make check` result is on par with glibc built with GNU ld on aarch64
and x86_64.
As a future clean-up, TLS_GD/TLS_LD/TLS_IE/TLS_IE macros can be removed from
sysdeps/*/tls-macros.h. We can add optional -mtls-dialect={gnu2,trad}
tests to ensure coverage.
Tested on aarch64-linux-gnu, powerpc64le-linux-gnu, and x86_64-linux-gnu.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
Gnumach's 0650a4ee30e3 implements support for high bits being set in the
mask parameter of vm_map. This allows to remove the fmh kludge that was
masking away the address range by mapping a dumb area there.
|
|
In "mips: align stack in clone [BZ #28223]"
(commit 1f51cd9a860ee45eee8a56fb2ba925267a2a7bfe) I made a mistake: I
misbelieved one "word" was 2-byte and "doubleword" should be 4-byte.
But in MIPS ABI one "word" is defined 32-bit (4-byte), so "doubleword" is
8-byte [1], and "quadword" is 16-byte [2].
[1]: "System V Application Binary Interface: MIPS(R) RISC Processor
Supplement, 3rd edition", page 3-31
[2]: "MIPSpro(TM) 64-Bit Porting and Transition Guide", page 23
|
|
The MIPS O32 ABI requires 4 byte aligned stack, and the MIPS N64 and N32
ABI require 8 byte aligned stack. Previously if the caller passed an
unaligned stack to clone the the child misbehaved.
Fixes bug 28223.
|
|
When the memory object is read-only, the kernel would be right in
refusing max vmprot containing VM_PROT_WRITE.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
|
|
The AArch64 ABI is largely platform agnostic and does not specify
_GLOBAL_OFFSET_TABLE_[0] ([1]). glibc ld.so turns out to be probably the
only user of _GLOBAL_OFFSET_TABLE_[0] and GNU ld defines the value
to the link-time address _DYNAMIC. [2]
In 2012, __ehdr_start was implemented in GNU ld and gold in binutils
2.23. Using adrp+add / (-mcmodel=tiny) adr to access
__ehdr_start/_DYNAMIC gives us a robust way to get the load address and
the link-time address of _DYNAMIC.
[1]: From a psABI maintainer, https://bugs.llvm.org/show_bug.cgi?id=49672#c2
[2]: LLD's aarch64 port does not set _GLOBAL_OFFSET_TABLE_[0] to the
link-time address _DYNAMIC.
LLD is widely used on aarch64 Android and ChromeOS devices. Software
just works without the need for _GLOBAL_OFFSET_TABLE_[0].
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
Simplify the code for memsets smaller than L1. Improve the unroll8 and
L1_prefetch loops.
Reviewed-by: Naohiro Tamura <naohirot@fujitsu.com>
|