Age | Commit message (Collapse) | Author | Files | Lines |
|
It fixes the build after 7ea510127e2067e and 22999b2f0fb62.
Checked with build for s390x-linux-gnu with -march=z13.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
|
|
__builtin_arm_uqsub8 is only available on gcc newer or equal than 10.
Checked on arm-linux-gnueabihf built with gcc 9.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The default Linux implementation already handled the Linux generic
ABIs interface used on newer architectures, so there is no need to
Imply the generic any longer.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Both are already defined on default linux Makefile.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And remove redundant entries on other architectures Version. The
version for fallocate64 was supposed to be 2.10, but it was then
added to 32-bit platforms in 2.11 because it mistakenly wasn't
exported for them in 2.10 (see the commit message for
1f3615a1c97a030bca59f728f998947f852679b9).
The linux/generic did not exist before 2.15, i.e. when the tile
ports were added (and microblaze did not exist before 2.18), which
explains those differences but also illustrates that "2.11 for 32-bit,
2.10 for 64-bit" should be sufficient since versions older than the
minimum for the architecture are automatically adjusted.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
While cleaning up old libc version support, the deprecated libc4 code was
accidentally kept in `implicit_soname`, instead of the libc6 code.
This causes additional symlinks to be created by `ldconfig` for libraries
without a soname, e.g. a library `libsomething.123.456.789` without a soname
will create a `libsomething.123` -> `libsomething.123.456.789` symlink.
As the libc6 version of the `implicit_soname` code is a trivial `xstrdup`,
just inline it and remove `implicit_soname` altogether.
Some further simplification looks possible (e.g. the call to `create_links`
looks like a no-op if `soname == NULL`, other than the verbose printfs), but
logic is kept as-is for now.
Fixes: BZ #30125
Fixes: 8ee878592c4a ("Assume only FLAG_ELF_LIBC6 suport")
Signed-off-by: Joan Bruguera <joanbrugueram@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Moved thread_state.h to x86 directory since we only need to customize
those 3 definitions.
Message-Id: <Y+x4xrsDMkAomncO@jupiter.tail36e24.ts.net>
|
|
And make it a bit more 64-bit ready. This is in preparation to moving this
file into x86/
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-6-bugaevc@gmail.com>
|
|
This ensures that a timer_t value can be cast to struct timer_node *
and back.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-5-bugaevc@gmail.com>
|
|
They all return int, not size_t.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-4-bugaevc@gmail.com>
|
|
Fix a few more cases of build errors caused by mismatched types. This is a
continuation of f4315054b46d5e58b44a709a51943fb73f846afb.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-3-bugaevc@gmail.com>
|
|
This is going to be done differently on x86_64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-2-bugaevc@gmail.com>
|
|
Signed-off-by: Qihao Chencao <twose@qq.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Add extra check for compiler definitions to ensure that compiler provides
sqrt and fma hw fpu instructions else use software implementation.
As divide/sqrt and FMA hw support from CPU side is optional,
the compiler can be configured by options to generate hw FPU instructions,
but without use of FDDIV, FDSQRT, FSDIV, FSSQRT, FDMADD and FSMADD
instructions. In this case __builtin_sqrt and __builtin_sqrtf provided by
compiler can't be used inside the glibc code, as these builtins are used
in implementations of sqrt() and sqrtf() functions but at the same time
these builtins unfold to sqrt() and sqrtf(). So it is possible to receive
code like that:
0001c4b4 <__ieee754_sqrtf>:
1c4b4: 0001 0000 b 0 ;1c4b4 <__ieee754_sqrtf>
The same is also true for __builtin_fma and __builtin_fmaf.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The ARCv2 ABI requires 4 byte stack pointer alignment. Don't allow to
use unaligned child stack in clone. As the stack grows down,
align it down.
This was pointed by misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests. Stack alignmet fixes these tests
fails.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Now that _STRING_ARCH_unaligned is not used anymore.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
And use a packed structure instead. The compiler generates optimized
unaligned code if the architecture supports it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
Builds for s390 recently started failing with:
../sysdeps/s390/multiarch/ifunc-impl-list.c: In function '__libc_ifunc_impl_list':
../sysdeps/s390/multiarch/ifunc-impl-list.c:83:21: error: unused variable 'dl_hwcap' [-Werror=unused-variable]
83 | unsigned long int dl_hwcap = features->hwcap;
| ^~~~~~~~
https://sourceware.org/pipermail/libc-testresults/2023q1/010855.html
Add __attribute__ ((unused)) as already done for another variable
there.
Tested with build-many-glibcs.py (compilers and glibcs) for
s390x-linux-gnu and s390-linux-gnu.
Note: s390x-linux-gnu-O3 started failing with a different error
earlier; that problem may still need to be fixed after this fix is in.
https://sourceware.org/pipermail/libc-testresults/2023q1/010829.html
|
|
Message-Id: <Y+8bqZzYTl7WaUm7@jupiter.tail36e24.ts.net>
|
|
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants in strtol-family functions when the base passed is 0
or 2. Implement that strtol support for glibc.
As discussed at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
this is incompatible with previous C standard versions, in that such
an input string starting with 0b or 0B was previously required to be
parsed as 0 (with the rest of the string unprocessed). Thus, as
proposed there, this patch adds 20 new __isoc23_* functions with
appropriate header redirection support. This patch does *not* do
anything about scanf %i (which will need 12 new functions per long
double variant, so 12, 24 or 36 depending on the glibc configuration),
instead leaving that for a future patch. The function names would
remain as __isoc23_* even if C2x ends up published in 2024 rather than
2023.
Making this change leads to the question of what should happen to
internal uses of these functions in glibc and its tests. The header
redirection (which applies for _GNU_SOURCE or any other feature test
macros enabling C2x features) has the effect of redirecting internal
uses but without those uses then ending up at a hidden alias (see the
comment in include/stdio.h about interaction with libc_hidden_proto).
It seems desirable for the default for internal uses to be the same
versions used by normal code using _GNU_SOURCE, so rather than doing
anything to disable that redirection, similar macro definitions to
those in include/stdio.h are added to the include/ headers for the new
functions.
Given that the default for uses in glibc is for the redirections to
apply, the next question is whether the C2x semantics are correct for
all those uses. Uses with the base fixed to 10, 16 or any other value
other than 0 or 2 can be ignored. I think this leaves the following
internal uses to consider (an important consideration for review of
this patch will be both whether this list is complete and whether my
conclusions on all entries in it are correct):
benchtests/bench-malloc-simple.c
benchtests/bench-string.h
elf/sotruss-lib.c
math/libm-test-support.c
nptl/perf.c
nscd/nscd_conf.c
nss/nss_files/files-parse.c
posix/tst-fnmatch.c
posix/wordexp.c
resolv/inet_addr.c
rt/tst-mqueue7.c
soft-fp/testit.c
stdlib/fmtmsg.c
support/support_test_main.c
support/test-container.c
sysdeps/pthread/tst-mutex10.c
I think all of these places are OK with the new semantics, except for
resolv/inet_addr.c, where the POSIX semantics of inet_addr do not
allow for binary constants; thus, I changed that file (to use
__strtoul_internal, whose semantics are unchanged) and added a test
for this case. In the case of posix/wordexp.c I think accepting
binary constants is OK since POSIX explicitly allows additional forms
of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is
not in POSIX so again I think accepting binary constants is OK.
Functions such as __strtol_internal, which are only exported for
compatibility with old binaries from when those were used in inline
functions in headers, have unchanged semantics; the __*_l_internal
versions (purely internal to libc and not exported) have a new
argument to specify whether to accept binary constants.
As well as for the standard functions, the header redirection also
applies to the *_l versions (GNU extensions), and to legacy functions
such as strtoq, to avoid confusing inconsistency (the *q functions
redirect to __isoc23_*ll rather than needing their own __isoc23_*
entry points). For the functions that are only declared with
_GNU_SOURCE, this means the old versions are no longer available for
normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro
is used to control the redirections in the headers, and cases in glibc
that wish to avoid the redirections - the function implementations
themselves and the tests of the old versions of the GNU functions -
then undefine and redefine that macro to allow the old versions to be
accessed. (There would of course be greater complexity should we wish
to make any of the old versions into compat symbols / avoid them being
defined at all for new glibc ABIs.)
strtol_l.c has some similarity to strtol.c in gnulib, but has already
diverged some way (and isn't listed at all at
https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c
and strtoul.c); I haven't made any attempts at gnulib compatibility in
the changes to that file.
I note incidentally that inttypes.h and wchar.h are missing the
__nonnull present on declarations of this family of functions in
stdlib.h; I didn't make any changes in that regard for the new
declarations added.
|
|
This macro from Mach headers conflicts with how
sysdeps/x86_64/multiarch/strcmp-sse2.S expects it to be defined.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230214173722.428140-3-bugaevc@gmail.com>
|
|
* Micro-optimize TLS access using GCC's native support for gs-based
addressing when available;
* Just use THREAD_GETMEM and THREAD_SETMEM instead of more inline
assembly;
* Sync tcbhead_t layout with NPTL, in particular update/fix __private_ss
offset;
* Statically assert that the two offsets that are a part of ABI are what
we expect them to be.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230214173722.428140-2-bugaevc@gmail.com>
|
|
This follows a99155555c21 ("htl: Remove unused files")
|
|
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-12-bugaevc@gmail.com>
|
|
|
|
|
|
And move pt-setup.c to the generic x86 tree.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-11-bugaevc@gmail.com>
|
|
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-10-bugaevc@gmail.com>
|
|
'sem' is the opaque 'sem_t', 'isem' is the actual 'struct new_sem'.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-6-bugaevc@gmail.com>
|
|
It has been decided that on x86_64, mach_msg_type_number_t stays 32-bit.
Therefore, it's not possible to use mach_msg_type_number_t
interchangeably with size_t, in particular this breaks when a pointer to
a variable is passed to a MIG routine.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-3-bugaevc@gmail.com>
|
|
Make the code flow more linear using early returns where possible. This
makes it so much easier to reason about what runs on error / successful
code paths.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-2-bugaevc@gmail.com>
|
|
We used to use .cfi_adjust_cfa_offset around %esp manipulation
asm instructions to fix unwinding, but when building glibc with
-fno-omit-frame-pointer this is bogus since in that case %ebp is the CFA and
does not move.
Instead, let's force -fno-omit-frame-pointer when building intr-msg.c so
that %ebp can always be used and no .cfi_adjust_cfa_offset is needed.
|
|
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
The powerpc64 ABI requires an initial stackframe so the child can
store/restore the TOC. It is create prior calling clone3 by
adjusting the stack size (since kernel will compute the stack as
stack plus size).
Checked on powerpc64-linux-gnu (power8, kernel 6.0) and
powerpc64le-linux-gnu (power9, kernel 4.18).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
|
|
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
|
|
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
|
|
The hard float abi and hard float are different,
Hard float abi: Use float register to pass float type arguments.
Hard float: Enable the hard float ISA feature.
So the with_fp_cond cannot represent these two features. When
-mfloat-abi=softfp, the float abi is soft and hard float is enabled.
So add 'with_hard_float_abi' in preconfigure and define 'CSKY_HARD_FLOAT_ABI'
if float abi is hard, and use 'CSKY_HARD_FLOAT_ABI' to determine
dynamic linker because it is what determines compatibility.
And with_fp_cond is still needed to tell glibc whether to enable
hard floating feature.
In addition, use AC_TRY_COMMAND to test gcc to ensure compatibility
between different versions of gcc. The original way has a problem
that __CSKY_HARD_FLOAT_FPU_SF__ means the target only has single
hard float-points ISA, so it's not defined in CPUs like ck810f.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This patch enables the option to influence hwcaps and stfle bits used
by the s390 specific ifunc-resolvers. The currently x86-specific
tunable glibc.cpu.hwcaps is also used on s390x to achieve the task. In
addition the user can also set a CPU arch-level like z13 instead of
single HWCAP and STFLE features.
Note that the tunable only handles the features which are really used
in the IFUNC-resolvers. All others are ignored as the values are only
used inside glibc. Thus we can influence:
- HWCAP_S390_VXRS (z13)
- HWCAP_S390_VXRS_EXT (z14)
- HWCAP_S390_VXRS_EXT2 (z15)
- STFLE_MIE3 (z15)
The influenced hwcap/stfle-bits are stored in the s390-specific
cpu_features struct which also contains reserved fields for future
usage.
The ifunc-resolvers and users of stfle bits are adjusted to use the
information from cpu_features struct.
On 31bit, the ELF_MACHINE_IRELATIVE macro is now also defined.
Otherwise the new ifunc-resolvers segfaults as they depend on
the not yet processed_rtld_global_ro@GLIBC_PRIVATE relocation.
|
|
It uses the bitmanip extension to optimize index_fist and index_last
with clz/ctz (using generic implementation that routes to compiler
builtin) and orc.b to check null bytes.
Checked the string test on riscv64 user mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Use the SH cmp/str on has_{zero,eq,zero_eq}.
Checked on sh4-linux-gnu.
|
|
While ppc has the more important string functions in assembly,
there are still a few generic routines used.
Use the Power 6 CMPB insn for testing of zeros.
Checked on powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
While arm has the more important string functions in assembly,
there are still a few generic routines used.
Use the UQSUB8 insn for testing of zeros.
Checked on armv7-linux-gnueabihf
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
While alpha has the more important string functions in assembly,
there are still a few for find the generic routines are used.
Use the CMPBGE insn, via the builtin, for testing of zeros. Use a
simplified expansion of __builtin_ctz when the insn isn't available.
Checked on alpha-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Use UXOR,SBZ to test for a zero byte within a word. While we can
get semi-decent code out of asm-goto, we would do slightly better
with a compiler builtin.
For index_zero et al, sequential testing of bytes is less expensive than
any tricks that involve a count-leading-zeros insn that we don't have.
Checked on hppa-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
GCC's combine pass cannot merge (x >> c | y << (32 - c)) into a
double-word shift unless (1) the subtract is in the same basic block
and (2) the result of the subtract is used exactly once. Neither
condition is true for any use of MERGE.
By forcing the use of a double-word shift, we not only reduce
contention on SAR, but also allow the setting of SAR to be hoisted
outside of a loop.
Checked on hppa-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
It also cleanups the multiple inclusion by leaving the ifunc
implementation to undef the weak_alias and libc_hidden_def.
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
New algorithm read the first aligned address and mask off the
unwanted bytes (this strategy is similar to arch-specific
implementations used on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_eq
macro.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powerpc64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
New algorithm now calls strchrnul.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powerpc64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
New algorithm read the first aligned address and mask off the unwanted
bytes (this strategy is similar to arch-specific implementations used
on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_zero_eq
function.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|