aboutsummaryrefslogtreecommitdiff
path: root/nss
AgeCommit message (Collapse)AuthorFilesLines
2017-03-15Fix build with --enable-static-nss [BZ #21088]Alexey Neyman1-1/+1
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-03-01Miscellaneous low-risk changes preparing for _ISOMAC testsuite.Zack Weinberg1-0/+1
These are a grab bag of changes where the testsuite was using internal symbols of some variety, but this was straightforward to fix, and the fixed code should work with or without the change to compile the testsuite under _ISOMAC. Four of these are just more #include adjustments, but I want to highlight sysdeps/powerpc/fpu/tst-setcontext-fpscr.c, which appears to have been written before the advent of sys/auxv.h. I think a big chunk of this file could be replaced by a simple call to getauxval, but I'll let someone who actually has a powerpc machine to test on do that. dlfcn/tst-dladdr.c was including ldsodefs.h just so it could use DL_LOOKUP_ADDRESS to print an additional diagnostic; as requested by Carlos, I have removed this. math/test-misc.c was using #ifndef NO_LONG_DOUBLE, which is an internal configuration macro, to decide whether to do certain tests involving 'long double'. I changed the test to #if LDBL_MANT_DIG > DBL_MANT_DIG instead, which uses only public float.h macros and is equivalent on all supported platforms. (Note that NO_LONG_DOUBLE doesn't mean 'the compiler doesn't support long double', it means 'long double is the same as double'.) tst-writev.c has a configuration macro 'ARTIFICIAL_LIMIT' that the Makefiles are expected to define, and sysdeps/unix/sysv/linux/Makefile was using the internal __getpagesize in the definition; changed to sysconf(_SC_PAGESIZE) which is the POSIX equivalent. ia64-linux doesn't supply 'clone', only '__clone2', which is not defined in the public headers(!) All the other clone tests have local extern declarations of __clone2, but tst-clone.c doesn't; it was getting away with this because include/sched.h does declare __clone2. * nss/tst-cancel-getpwuid_r.c: Include nss.h. * string/strcasestr.c: No need to include config.h. * sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: Include sys/auxv.h. Don't include sysdep.h. * sysdeps/powerpc/tst-set_ppr.c: Don't include dl-procinfo.h. * dlfcn/tst-dladdr.c: Don't include ldsodefs.h. Don't use DL_LOOKUP_ADDRESS. * math/test-misc.c: Instead of testing NO_LONG_DOUBLE, test whether LDBL_MANT_DIG is greater than DBL_MANT_DIG. * sysdeps/unix/sysv/linux/Makefile (CFLAGS-tst-writev.c): Use sysconf (_SC_PAGESIZE) instead of __getpagesize in definition of ARTIFICIAL_LIMIT. * sysdeps/unix/sysv/linux/tst-clone.c [__ia64__]: Add extern declaration of __clone2.
2017-01-05Increase some test timeouts.Joseph Myers2-0/+2
This patch increases timeouts on some tests I've observed timing out. elf/tst-tls13 and iconvdata/tst-loading both dynamically load many objects and so are slow when testing over NFS. They had timeouts set from before the default changed from 2 to 20 seconds; this patch removes those old settings, so effectively increasing the timeout to 20 seconds (from 3 and 10 seconds respectively). malloc/tst-malloc-thread-fail.c and malloc/tst-mallocfork2.c are slow on slow systems and so I set a fairly arbitrary 100 second timeout, which seems to suffice on the system where I saw them timing out. nss/tst-cancel-getpwuid_r.c and nss/tst-nss-getpwent.c are slow on systems with a large passwd file; I set timeouts that empirically worked for me. (It seems tst-cancel-getpwuid_r.c is hitting the 100000 getpwuid_r call limit in my testing, with each call taking a bit over 0.007 seconds, so 700 seconds for the test.) * elf/tst-tls13.c (TIMEOUT): Remove. * iconvdata/tst-loading.c (TIMEOUT): Likewise. * malloc/tst-malloc-thread-fail.c (TIMEOUT): Increase to 100. * malloc/tst-mallocfork2.c (TIMEOUT): Define to 100. * nss/tst-cancel-getpwuid_r.c (TIMEOUT): Define to 900. * nss/tst-nss-getpwent.c (TIMEOUT): Define to 300.
2017-01-01Update copyright dates not handled by scripts/update-copyrights.Joseph Myers2-2/+2
I've updated copyright dates in glibc for 2017. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Please remember to include 2017 in the dates for any new files added in future (which means updating any existing uncommitted patches you have that add new files to use the new copyright dates in them). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers63-63/+63
2016-12-31resolv: Deprecate the "inet6" option and RES_USE_INET6 [BZ #19582]Florian Weimer2-9/+9
2016-12-23Add deferred cancellation regression test for getpwuid_r.Carlos O'Donell2-0/+190
The fix in commit 312be3f9f5eab1643d7dcc7728c76d413d4f2640 resolved several cancellation issues in several APIs. This regression test is designed to double check that at least getpwuid_r remainds correctly implemented and does not provide additional unintended cancellation points that may leave locks in an inconsistent state.
2016-08-18Fix incorrect double-checked locking related to _res_hconf.initialized.Torvald Riegel1-2/+1
_res_hconf.initialized was not suitable for use in a multi-threaded environment due to the lack of atomics and memory barriers. Use of it was also unnecessary because _res_hconf_init did the right thing by using __libc_once. This patch fixes the glibc-internal uses by just calling _res_hconf_init unconditionally, and switches to a release MO atomic store for _res_hconf.initialized to fix the glibc side of the synchronization problem (which will maintain backward compatibility, but cannot fix the lack of acquire MO on any glibc-external loads). [BZ #20477] * resolv/res_hconf.c (do_init): Use atomic access. * resolv/res_hconf.h: Add comments. * nscd/aicache.c (addhstaiX): Call _res_hconf_init unconditionally. * nss/getXXbyYY_r.c (REENTRANT_NAME): Likewise. * sysdeps/posix/getaddrinfo.c (gaih_inet): Likewise.
2016-06-11nss_db: Fix initialization of iteration position [BZ #20237]Florian Weimer1-1/+7
When get*ent is called without a preceding set*ent, we need to set the initial iteration position in get*ent. Reproducer: Add “services: db files” to /etc/nsswitch.conf, then run “perl -e getservent”. It will segfault before this change, and exit silently after it.
2016-04-29NSS: Implement group merging support.Stephen Gallagher4-6/+137
https://sourceware.org/glibc/wiki/Proposals/GroupMerging == Justification == It is common today for users to rely on centrally-managed user stores for handling their user accounts. However, much software existing today does not have an innate understanding of such accounts. Instead, they commonly rely on membership in known groups for managing access-control (for example the "wheel" group on Fedora and RHEL systems or the "adm" group on Debian-derived systems). In the present incarnation of nsswitch, the only way to have such groups managed by a remote user store such as FreeIPA or Active Directory would be to manually remove the groups from /etc/group on the clients so that nsswitch would then move past nss_files and into the SSSD, nss-ldap or other remote user database. == Solution == With this patch, a new action is introduced for nsswitch: NSS_ACTION_MERGE. To take advantage of it, one will add [SUCCESS=merge] between two database entries in the nsswitch.conf file. When a group is located in the first of the two group entries, processing will continue on to the next one. If the group is also found in the next entry (and the group name and GID are an exact match), the member list of the second entry will be added to the group object to be returned. == Implementation == After each DL_LOOKUP_FN() returns, the next action is checked. If the function returned NSS_STATUS_SUCCESS and the next action is NSS_ACTION_MERGE, a copy of the result buffer is saved for the next pass through the loop. If on this next pass through the loop the database returns another instance of a group matching both the group name and GID, the member list is added to the previous list and it is returned as a single object. If the following database does not contain the same group, then the original is copied back into the destination buffer. This patch implements merge functionality only for the group database. For other databases, there is a default implementation that will return the EINVAL errno if a merge is requested. The merge functionality can be implemented for other databases at a later time if such is needed. Each database must provide a unique implementation of the deep-copy and merge functions. If [SUCCESS=merge] is present in nsswitch.conf for a glibc version that does not support it, glibc will process results up until that operation, at which time it will return results if it has found them or else will simply return an error. In practical terms, this ends up behaving like the remainder of the nsswitch.conf line does not exist. == Iterators == This feature does not modify the iterator functionality from its current behavior. If getgrnam() or getgrgid() is called, glibc will iterate through all entries in the `group` line in nsswitch.conf and display the list of members without attempting to merge them. This is consistent with the behavior of nss_files where if two separate lines are specified for the same group in /etc/groups, getgrnam()/getgrgid() will display both. Clients are already expected to handle this gracefully. == No Premature Optimizations == The following is a list of places that might be eligible for optimization, but were not overengineered for this initial contribution: * Any situation where a merge may occur will result in one malloc() of the same size as the input buffer. * Any situation where a merge does occur will result in a second malloc() to hold the list of pointers to member name strings. * The list of members is simply concatenated together and is not tested for uniqueness (which is identical to the behavior for nss_files, which will simply return identical values if they both exist on the line in the file. This could potentially be optimized to reduce space usage in the buffer, but it is both complex and computationally expensive to do so. == Testing == I performed testing by running the getent utility against my newly-built glibc and configuring /etc/nsswitch.conf with the following entry: group: group: files [SUCCESS=merge] sss In /etc/group I included the line: wheel:x:10:sgallagh I then configured my local SSSD using the id_provider=local to respond with: wheel:*:10:localuser,localuser2 I then ran `getent group wheel` against the newly-built glibc in multiple situations and received the expected output as described above: * When SSSD was running. * When SSSD was configured in nsswitch.conf but the daemon was not running. * When SSSD was configured in nsswitch.conf but nss_sss.so.2 was not installed on the system. * When the order of 'sss' and 'files' was reversed. * All of the above with the [SUCCESS=merge] removed (to ensure no regressions). * All of the above with `getent group 10`. * All of the above with `getent group` with and without `enumerate=true` set in SSSD. * All of the above with and without nscd enabled on the system.
2016-04-13Register extra test objectsAndreas Schwab1-0/+1
This makes sure that the extra test objects are compiled with the correct MODULE_NAME and dependencies are tracked.
2016-03-29nss_db: Propagate ERANGE error if parse_line fails [BZ #19837]Florian Weimer1-2/+2
Reproducer (needs to run as root): perl -e \ 'print "large:x:999:" . join(",", map {"user$_"} (1 .. 135))."\n"' \ >> /etc/group cd /var/db make getent -s db group After the fix, the last command should list the "large" group. The magic number 135 has been chosen so that the line is shorter than 1024 bytes, but the pointers required to encode the member array will cross the threshold, triggering the bug.
2016-01-04Update copyright dates not handled by scripts/update-copyrights.Joseph Myers2-2/+2
I've updated copyright dates in glibc for 2016. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers62-62/+62
2015-10-20Convert 113 more function definitions to prototype style (files with ↵Joseph Myers1-5/+1
assertions). This mostly automatically-generated patch converts 113 function definitions in glibc from old-style K&R to prototype-style. Following my other recent such patches, this one deals with the case of function definitions in files that either contain assertions or where grep suggested they might contain assertions - and thus where it isn't possible to use a simple object code comparison as a sanity check on the correctness of the patch, because line numbers are changed. A few such automatically-generated changes needed to be supplemented by manual changes for the result to compile. openat64 had a prototype declaration with "..." but an old-style definition in sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the generated prototype in the definition (I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing such cases in GCC; the old state was undefined behavior not requiring a diagnostic, but one seems a good idea). In addition, as Florian has noted regparm attribute mismatches between declaration and definition are only diagnosed for prototype definitions, and five functions needed internal_function added to their definitions (in the case of __pthread_mutex_cond_lock, via the macro definition of __pthread_mutex_lock) to compile on i386. After this patch is in, remaining old-style definitions are probably most readily fixed manually before we can turn on -Wold-style-definition for all builds. Tested for x86_64 and x86 (testsuite). * crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style function definition. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * debug/backtracesyms.c (__backtrace_symbols): Likewise. * elf/dl-minimal.c (_itoa): Likewise. * hurd/hurdmalloc.c (malloc): Likewise. (free): Likewise. (realloc): Likewise. * inet/inet6_option.c (inet6_option_space): Likewise. (inet6_option_init): Likewise. (inet6_option_append): Likewise. (inet6_option_alloc): Likewise. (inet6_option_next): Likewise. (inet6_option_find): Likewise. * io/ftw.c (FTW_NAME): Likewise. (NFTW_NAME): Likewise. (NFTW_NEW_NAME): Likewise. (NFTW_OLD_NAME): Likewise. * libio/iofwide.c (_IO_fwide): Likewise. * libio/strops.c (_IO_str_init_static_internal): Likewise. (_IO_str_init_static): Likewise. (_IO_str_init_readonly): Likewise. (_IO_str_overflow): Likewise. (_IO_str_underflow): Likewise. (_IO_str_count): Likewise. (_IO_str_seekoff): Likewise. (_IO_str_pbackfail): Likewise. (_IO_str_finish): Likewise. * libio/wstrops.c (_IO_wstr_init_static): Likewise. (_IO_wstr_overflow): Likewise. (_IO_wstr_underflow): Likewise. (_IO_wstr_count): Likewise. (_IO_wstr_seekoff): Likewise. (_IO_wstr_pbackfail): Likewise. (_IO_wstr_finish): Likewise. * locale/programs/localedef.c (normalize_codeset): Likewise. * locale/programs/locarchive.c (add_locale_to_archive): Likewise. (add_locales_to_archive): Likewise. (delete_locales_from_archive): Likewise. * malloc/malloc.c (__libc_mallinfo): Likewise. * math/gen-auto-libm-tests.c (init_fp_formats): Likewise. * misc/tsearch.c (__tfind): Likewise. * nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise. * nptl/pthread_attr_getdetachstate.c (__pthread_attr_getdetachstate): Likewise. * nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize): Likewise. * nptl/pthread_attr_getinheritsched.c (__pthread_attr_getinheritsched): Likewise. * nptl/pthread_attr_getschedparam.c (__pthread_attr_getschedparam): Likewise. * nptl/pthread_attr_getschedpolicy.c (__pthread_attr_getschedpolicy): Likewise. * nptl/pthread_attr_getscope.c (__pthread_attr_getscope): Likewise. * nptl/pthread_attr_getstack.c (__pthread_attr_getstack): Likewise. * nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr): Likewise. * nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize): Likewise. * nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise. (__pthread_attr_init_2_0): Likewise. * nptl/pthread_attr_setdetachstate.c (__pthread_attr_setdetachstate): Likewise. * nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize): Likewise. * nptl/pthread_attr_setinheritsched.c (__pthread_attr_setinheritsched): Likewise. * nptl/pthread_attr_setschedparam.c (__pthread_attr_setschedparam): Likewise. * nptl/pthread_attr_setschedpolicy.c (__pthread_attr_setschedpolicy): Likewise. * nptl/pthread_attr_setscope.c (__pthread_attr_setscope): Likewise. * nptl/pthread_attr_setstack.c (__pthread_attr_setstack): Likewise. * nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr): Likewise. * nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize): Likewise. * nptl/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * nptl/pthread_create.c (__find_in_stack_list): Likewise. * nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise. * nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to use internal_function. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to prototype-style function definition. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise. (__pthread_mutex_cond_lock_adjust): Likewise. Use internal_function. * nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock): Convert to prototype-style function definition. * nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt): Likewise. (__pthread_mutex_unlock): Likewise. * nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise. * nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise. * nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise. * nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise. * nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise. * nss/makedb.c (process_input): Likewise. * posix/fnmatch.c (__strchrnul): Likewise. (__wcschrnul): Likewise. (fnmatch): Likewise. * posix/fnmatch_loop.c (FCT): Likewise. * posix/glob.c (globfree): Likewise. (__glob_pattern_type): Likewise. (__glob_pattern_p): Likewise. * posix/regcomp.c (re_compile_pattern): Likewise. (re_set_syntax): Likewise. (re_compile_fastmap): Likewise. (regcomp): Likewise. (regerror): Likewise. (regfree): Likewise. * posix/regexec.c (regexec): Likewise. (re_match): Likewise. (re_search): Likewise. (re_match_2): Likewise. (re_search_2): Likewise. (re_search_stub): Likewise. Use internal_function (re_copy_regs): Likewise. (re_set_registers): Convert to prototype-style function definition. (prune_impossible_nodes): Likewise. Use internal_function. * resolv/inet_net_pton.c (inet_net_pton): Convert to prototype-style function definition. (inet_net_pton_ipv4): Likewise. * stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise. * sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise. * sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise. * sysdeps/pthread/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise. Make variadic. * time/strptime_l.c (localtime_r): Convert to prototype-style function definition. * wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise. * wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise. * wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise. * wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
2015-10-02Fix i386 build after put*ent hardening changes.Joseph Myers3-0/+3
The recent put*ent hardening changes broke the build for i386. i386 defines internal_function to __attribute__ ((regparm (3), stdcall)), which affects type compatibility, so requiring internal_function to be used consistently on declarations and definitions. This patch adds internal_function to the definitions of the new functions using it on their declarations. Tested for i386 that this fixes the build. * nss/rewrite_field.c (__nss_rewrite_field): Use internal_function. * nss/valid_field.c (__nss_valid_field): Likewise. * nss/valid_list_field.c (__nss_valid_list_field): Likewise.
2015-10-02Harden putpwent, putgrent, putspent, putspent against injection [BZ #18724]Florian Weimer6-71/+231
This prevents injection of ':' and '\n' into output functions which use the NSS files database syntax. Critical fields (user/group names and file system paths) are checked strictly. For backwards compatibility, the GECOS field is rewritten instead. The getent program is adjusted to use the put*ent functions in libc, instead of local copies. This changes the behavior of getent if user names start with '-' or '+'.
2015-09-25Fix inconsistent passwd compensation in nss/bug17079.cFlorian Weimer1-1/+9
It used to be common practice to have a statically linked shell for an alternative root account, as in: root:x:0:0:root:/root:/bin/bash toor:x:0:0:root recovery account:/root:/sbin/sash This causes problems with passwd NSS tests because a UID-based lookup will only retrieve one of those entries. The original version of nss/bug17079.c detected this, but failed to use this information later on.
2015-09-22Test in commit e07aabba73ea62e7dfa0512507c92efb851fbdbe is for bug 17079Florian Weimer2-2/+3
2015-09-22Add test case for bug 18287Florian Weimer2-1/+237
2015-09-08Move bits/libc-lock.h and bits/libc-lockP.h out of bits/ (bug 14912).Joseph Myers9-9/+9
It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/libc-lock.h to plain libc-lock.h and bits/libc-lockP.h to plain libc-lockP.h to follow that convention. Note that I don't know where libc-lockP.h comes from for Hurd (the Hurd libc-lock.h includes libc-lockP.h, but the only libc-lockP.h in the glibc source tree is for NPTL) - some unmerged patch? - but I updated the #include in the Hurd libc-lock.h anyway. Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * bits/libc-lock.h: Move to ... * sysdeps/generic/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/mach/hurd/bits/libc-lock.h: Move to ... * sysdeps/mach/hurd/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. [_LIBC]: Include <libc-lockP.h> instead of <bits/libc-lockP.h>. * sysdeps/mach/bits/libc-lock.h: Move to ... * sysdeps/mach/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/nptl/bits/libc-lock.h: Move to ... * sysdeps/nptl/libc-lock.h: ...here. (_BITS_LIBC_LOCK_H): Rename macro to _LIBC_LOCK_H. * sysdeps/nptl/bits/libc-lockP.h: Move to ... * sysdeps/nptl/libc-lockP.h: ...here. (_BITS_LIBC_LOCKP_H): Rename macro to _LIBC_LOCKP_H. * crypt/crypt_util.c: Include <libc-lock.h> instead of <bits/libc-lock.h>. * dirent/scandir-tail.c: Likewise. * dlfcn/dlerror.c: Likewise. * elf/dl-close.c: Likewise. * elf/dl-iteratephdr.c: Likewise. * elf/dl-lookup.c: Likewise. * elf/dl-open.c: Likewise. * elf/dl-support.c: Likewise. * elf/dl-writev.h: Likewise. * elf/rtld.c: Likewise. * grp/fgetgrent.c: Likewise. * gshadow/fgetsgent.c: Likewise. * gshadow/sgetsgent.c: Likewise. * iconv/gconv_conf.c: Likewise. * iconv/gconv_db.c: Likewise. * iconv/gconv_dl.c: Likewise. * iconv/gconv_int.h: Likewise. * iconv/gconv_trans.c: Likewise. * include/link.h: Likewise. * inet/getnameinfo.c: Likewise. * inet/getnetgrent.c: Likewise. * inet/getnetgrent_r.c: Likewise. * intl/bindtextdom.c: Likewise. * intl/dcigettext.c: Likewise. * intl/finddomain.c: Likewise. * intl/gettextP.h: Likewise. * intl/loadmsgcat.c: Likewise. * intl/localealias.c: Likewise. * intl/textdomain.c: Likewise. * libidn/idn-stub.c: Likewise. * libio/libioP.h: Likewise. * locale/duplocale.c: Likewise. * locale/freelocale.c: Likewise. * locale/newlocale.c: Likewise. * locale/setlocale.c: Likewise. * login/getutent_r.c: Likewise. * login/getutid_r.c: Likewise. * login/getutline_r.c: Likewise. * login/utmp-private.h: Likewise. * login/utmpname.c: Likewise. * malloc/mtrace.c: Likewise. * misc/efgcvt.c: Likewise. * misc/error.c: Likewise. * misc/fstab.c: Likewise. * misc/getpass.c: Likewise. * misc/mntent.c: Likewise. * misc/syslog.c: Likewise. * nis/nis_call.c: Likewise. * nis/nis_callback.c: Likewise. * nis/nss-default.c: Likewise. * nis/nss_compat/compat-grp.c: Likewise. * nis/nss_compat/compat-initgroups.c: Likewise. * nis/nss_compat/compat-pwd.c: Likewise. * nis/nss_compat/compat-spwd.c: Likewise. * nis/nss_nis/nis-alias.c: Likewise. * nis/nss_nis/nis-ethers.c: Likewise. * nis/nss_nis/nis-grp.c: Likewise. * nis/nss_nis/nis-hosts.c: Likewise. * nis/nss_nis/nis-network.c: Likewise. * nis/nss_nis/nis-proto.c: Likewise. * nis/nss_nis/nis-pwd.c: Likewise. * nis/nss_nis/nis-rpc.c: Likewise. * nis/nss_nis/nis-service.c: Likewise. * nis/nss_nis/nis-spwd.c: Likewise. * nis/nss_nisplus/nisplus-alias.c: Likewise. * nis/nss_nisplus/nisplus-ethers.c: Likewise. * nis/nss_nisplus/nisplus-grp.c: Likewise. * nis/nss_nisplus/nisplus-hosts.c: Likewise. * nis/nss_nisplus/nisplus-initgroups.c: Likewise. * nis/nss_nisplus/nisplus-network.c: Likewise. * nis/nss_nisplus/nisplus-proto.c: Likewise. * nis/nss_nisplus/nisplus-pwd.c: Likewise. * nis/nss_nisplus/nisplus-rpc.c: Likewise. * nis/nss_nisplus/nisplus-service.c: Likewise. * nis/nss_nisplus/nisplus-spwd.c: Likewise. * nis/ypclnt.c: Likewise. * nptl/libc_pthread_init.c: Likewise. * nss/getXXbyYY.c: Likewise. * nss/getXXent.c: Likewise. * nss/getXXent_r.c: Likewise. * nss/nss_db/db-XXX.c: Likewise. * nss/nss_db/db-netgrp.c: Likewise. * nss/nss_db/nss_db.h: Likewise. * nss/nss_files/files-XXX.c: Likewise. * nss/nss_files/files-alias.c: Likewise. * nss/nsswitch.c: Likewise. * posix/regex_internal.h: Likewise. * posix/wordexp.c: Likewise. * pwd/fgetpwent.c: Likewise. * resolv/res_hconf.c: Likewise. * resolv/res_libc.c: Likewise. * shadow/fgetspent.c: Likewise. * shadow/lckpwdf.c: Likewise. * shadow/sgetspent.c: Likewise. * socket/opensock.c: Likewise. * stdio-common/reg-modifier.c: Likewise. * stdio-common/reg-printf.c: Likewise. * stdio-common/reg-type.c: Likewise. * stdio-common/vfprintf.c: Likewise. * stdio-common/vfscanf.c: Likewise. * stdlib/abort.c: Likewise. * stdlib/cxa_atexit.c: Likewise. * stdlib/fmtmsg.c: Likewise. * stdlib/random.c: Likewise. * stdlib/setenv.c: Likewise. * string/strsignal.c: Likewise. * sunrpc/auth_none.c: Likewise. * sunrpc/bindrsvprt.c: Likewise. * sunrpc/create_xid.c: Likewise. * sunrpc/key_call.c: Likewise. * sunrpc/rpc_thread.c: Likewise. * sysdeps/arm/backtrace.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/generic/stdio-lock.h: Likewise. * sysdeps/generic/unwind-dw2-fde.c: Likewise. * sysdeps/i386/backtrace.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.c: Likewise. * sysdeps/m68k/backtrace.c: Likewise. * sysdeps/mach/hurd/cthreads.c: Likewise. * sysdeps/mach/hurd/dirstream.h: Likewise. * sysdeps/mach/hurd/malloc-machine.h: Likewise. * sysdeps/nptl/malloc-machine.h: Likewise. * sysdeps/nptl/stdio-lock.h: Likewise. * sysdeps/posix/dirstream.h: Likewise. * sysdeps/posix/getaddrinfo.c: Likewise. * sysdeps/posix/system.c: Likewise. * sysdeps/pthread/aio_suspend.c: Likewise. * sysdeps/s390/s390-32/backtrace.c: Likewise. * sysdeps/s390/s390-64/backtrace.c: Likewise. * sysdeps/unix/sysv/linux/check_pf.c: Likewise. * sysdeps/unix/sysv/linux/if_index.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutent_r.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutid_r.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getutline_r.c: Likewise. * sysdeps/unix/sysv/linux/shm-directory.c: Likewise. * sysdeps/unix/sysv/linux/system.c: Likewise. * sysdeps/x86_64/backtrace.c: Likewise. * time/alt_digit.c: Likewise. * time/era.c: Likewise. * time/tzset.c: Likewise. * wcsmbs/wcsmbsload.c: Likewise. * nptl/tst-initializers1.c (do_test): Refer to <libc-lock.h> instead of <bits/libc-lock.h> in comment.
2015-08-09fix non-portable `echo -n` usageMike Frysinger1-9/+9
These scripts use #!/bin/sh explicitly, so make sure they avoid echo -n as different shells treat it differently. Use the portable printf func instead.
2015-05-11Separate internal state between getXXent and getXXbyYY NSS calls (bug 18007)Andreas Schwab3-167/+67
2015-04-29CVE-2014-8121: Do not close NSS files database during iteration [BZ #18007]Florian Weimer3-2/+120
Robin Hack discovered Samba would enter an infinite loop processing certain quota-related requests. We eventually tracked this down to a glibc issue. Running a (simplified) test case under strace shows that /etc/passwd is continuously opened and closed: … open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 lseek(3, 0, SEEK_SET) = 0 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2717 lseek(3, 2717, SEEK_SET) = 2717 close(3) = 0 open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3 lseek(3, 0, SEEK_CUR) = 0 … The lookup function implementation in nss/nss_files/files-XXX.c:DB_LOOKUP has code to prevent that. It is supposed skip closing the input file if it was already open. /* Reset file pointer to beginning or open file. */ \ status = internal_setent (keep_stream); \ \ if (status == NSS_STATUS_SUCCESS) \ { \ /* Tell getent function that we have repositioned the file pointer. */ \ last_use = getby; \ \ while ((status = internal_getent (result, buffer, buflen, errnop \ H_ERRNO_ARG EXTRA_ARGS_VALUE)) \ == NSS_STATUS_SUCCESS) \ { break_if_match } \ \ if (! keep_stream) \ internal_endent (); \ } \ keep_stream is initialized from the stayopen flag in internal_setent. internal_setent is called from the set*ent implementation as: status = internal_setent (stayopen); However, for non-host database, this flag is always 0, per the STAYOPEN magic in nss/getXXent_r.c. Thus, the fix is this: - status = internal_setent (stayopen); + status = internal_setent (1); This is not a behavioral change even for the hosts database (where the application can specify the stayopen flag) because with a call to sethostent(0), the file handle is still not closed in the implementation of gethostent.
2015-03-13Enhance nscd's inotify support (Bug 14906).Carlos O'Donell2-44/+30
In bug 14906 the user complains that the inotify support in nscd is not sufficient when it comes to detecting changes in the configurationfiles that should be watched for the various databases. The current nscd implementation uses inotify to watch for changes in the configuration files, but adds watches only for IN_DELETE_SELF and IN_MODIFY. These watches are insufficient to cover even the most basic uses by a system administrator. For example using emacs or vim to edit a configuration file should trigger a reload but it might not if the editors use move to atomically update the file. This atomic update changes the inode and thus removes the notification on the file (as inotify is based on inodes). Thus the inotify support in nscd for configuration files is insufficient to account for the average use cases of system administrators and users. The inotify support is significantly enhanced and described here: https://www.sourceware.org/ml/libc-alpha/2015-02/msg00504.html Tested on x86_64 with and without inotify support.
2015-03-04Split rpcent tests out of tst-netdb.Roland McGrath1-41/+0
2015-02-06Exclude rpcent functions and NSS backends for rpc, key when excluding sunrpc.Roland McGrath2-2/+14
2015-01-02Update copyright dates not handled by scripts/update-copyrights.Joseph Myers2-2/+2
I've updated copyright dates in glibc for 2015. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Apart from the files updated last time (of which sotruss.ksh had moved to sotruss.sh during the year) this also updates nptl/version.c (missed from 2006 until October) and sysdeps/unix/sysv/linux/lddlibc4.c (missed since 2009). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers56-56/+56
2014-11-27Fix nss/tst-nss-test1.c format warning.Joseph Myers1-1/+1
Testing for 32-bit x86 shows up a warning "tst-nss-test1.c:25:3: warning: format '%ju' expects argument of type 'uintmax_t', but argument 2 has type 'int' [-Wformat=]". The argument is a difference of two pointers, a signed quantity of type ptrdiff_t for which the right format is %td; this patch makes this test use that format. Tested for 32-bit x86. * nss/tst-nss-test1.c (do_test): Use %td printf format for pointer difference, not %ju.
2014-11-24Remove NOT_IN_libcSiddhesh Poyarekar1-1/+0
Replace with !IS_IN (libc). This completes the transition from the IS_IN/NOT_IN macros to the IN_MODULE macro set. The generated code is unchanged on x86_64. * stdlib/isomac.c (fmt): Replace NOT_IN_libc with IN_MODULE. (get_null_defines): Adjust. * sunrpc/Makefile: Adjust comment. * Makerules (CPPFLAGS-nonlib): Remove NOT_IN_libc. * elf/Makefile (CPPFLAGS-sotruss-lib): Likewise. (CFLAGS-interp.c): Likewise. (CFLAGS-ldconfig.c): Likewise. (CPPFLAGS-.os): Likewise. * elf/rtld-Rules (rtld-CPPFLAGS): Likewise. * extra-lib.mk (CPPFLAGS-$(lib)): Likewise. * extra-modules.mk (extra-modules.mk): Likewise. * iconv/Makefile (CPPFLAGS-iconvprogs): Likewise. * locale/Makefile (CPPFLAGS-locale_programs): Likewise. * malloc/Makefile (CPPFLAGS-memusagestat): Likewise. * nscd/Makefile (CPPFLAGS-nscd): Likewise. * nss/Makefile (CPPFLAGS-nss_test1): Likewise. * stdlib/Makefile (CFLAGS-tst-putenvmod.c): Likewise. * sysdeps/gnu/Makefile ($(objpfx)errlist-compat.c): Likewise. * sysdeps/unix/sysv/linux/Makefile (CPPFLAGS-lddlibc4): Likewise. * iconvdata/Makefile (CPPFLAGS): Likewise. (cpp-srcs-left): Add libof for all iconvdata routines. * bits/stdio-lock.h: Replace NOT_IN_libc with IS_IN. * include/assert.h: Likewise. * include/ctype.h: Likewise. * include/errno.h: Likewise. * include/libc-symbols.h: Likewise. * include/math.h: Likewise. * include/netdb.h: Likewise. * include/resolv.h: Likewise. * include/stdio.h: Likewise. * include/stdlib.h: Likewise. * include/string.h: Likewise. * include/sys/stat.h: Likewise. * include/wctype.h: Likewise. * intl/l10nflist.c: Likewise. * libidn/idn-stub.c: Likewise. * libio/libioP.h: Likewise. * nptl/libc_multiple_threads.c: Likewise. * nptl/pthreadP.h: Likewise. * posix/regex_internal.h: Likewise. * resolv/res_hconf.c: Likewise. * sysdeps/arm/armv7/multiarch/memcpy.S: Likewise. * sysdeps/arm/memmove.S: Likewise. * sysdeps/arm/sysdep.h: Likewise. * sysdeps/generic/_itoa.h: Likewise. * sysdeps/generic/symbol-hacks.h: Likewise. * sysdeps/gnu/errlist.awk: Likewise. * sysdeps/gnu/errlist.c: Likewise. * sysdeps/i386/i586/memcpy.S: Likewise. * sysdeps/i386/i586/memset.S: Likewise. * sysdeps/i386/i686/memcpy.S: Likewise. * sysdeps/i386/i686/memmove.S: Likewise. * sysdeps/i386/i686/mempcpy.S: Likewise. * sysdeps/i386/i686/memset.S: Likewise. * sysdeps/i386/i686/multiarch/bcopy.S: Likewise. * sysdeps/i386/i686/multiarch/bzero.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memset.S: Likewise. * sysdeps/i386/i686/multiarch/memset_chk.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.S: Likewise. * sysdeps/i386/i686/multiarch/strnlen.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcschr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcslen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp-c.c: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise. * sysdeps/ia64/fpu/libm-symbols.h: Likewise. * sysdeps/nptl/bits/libc-lock.h: Likewise. * sysdeps/nptl/bits/libc-lockP.h: Likewise. * sysdeps/nptl/bits/stdio-lock.h: Likewise. * sysdeps/posix/closedir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/posix/readdir.c: Likewise. * sysdeps/posix/rewinddir.c: Likewise. * sysdeps/powerpc/novmx-sigjmp.c: Likewise. * sysdeps/powerpc/powerpc32/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc32/power6/memset.S: Likewise. * sysdeps/powerpc/powerpc32/setjmp.S: Likewise. * sysdeps/powerpc/powerpc64/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strpbrk.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc64/setjmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-32/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-32/multiarch/memset.S: Likewise. * sysdeps/s390/s390-64/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-64/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-64/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-64/multiarch/memset.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset.S: Likewise. * sysdeps/unix/alpha/sysdep.S: Likewise. * sysdeps/unix/alpha/sysdep.h: Likewise. * sysdeps/unix/make-syscalls.sh: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/getpid.c: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/not-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/longjmp_chk.c: Likewise. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/brk.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise. * sysdeps/wordsize-32/symbol-hacks.h: Likewise. * sysdeps/x86_64/memcpy.S: Likewise. * sysdeps/x86_64/memmove.c: Likewise. * sysdeps/x86_64/memset.S: Likewise. * sysdeps/x86_64/multiarch/init-arch.h: Likewise. * sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise. * sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcmp.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcpy.S: Likewise. * sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memmove.c: Likewise. * sysdeps/x86_64/multiarch/mempcpy.S: Likewise. * sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memset-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset.S: Likewise. * sysdeps/x86_64/multiarch/memset_chk.S: Likewise. * sysdeps/x86_64/multiarch/strcat-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcat-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcat.S: Likewise. * sysdeps/x86_64/multiarch/strchr-sse2-no-bsf.S: Likewise. * sysdeps/x86_64/multiarch/strchr.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcmp.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcpy.S: Likewise. * sysdeps/x86_64/multiarch/strcspn.S: Likewise. * sysdeps/x86_64/multiarch/strspn.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy-c.c: Likewise. * sysdeps/x86_64/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy.S: Likewise. * sysdeps/x86_64/multiarch/wmemcmp-c.c: Likewise. * sysdeps/x86_64/multiarch/wmemcmp.S: Likewise. * sysdeps/x86_64/strcmp.S: Likewise.
2014-11-24Remove IS_IN_libcSiddhesh Poyarekar1-1/+1
Replace it with IS_IN (libc) and remove the one place that it is defined in. The generated code remains unchanged on x86_64. * include/shlib-compat.h [!NOT_IN_libc]: Remove. * nss/nss_files/files-parse.c (IS_IN_libc): Replace with IS_IN (libc).
2014-11-21BZ#14498: fix infinite loop in nss_db_getservbynameAlexandre Oliva2-5/+11
nss_db uses nss_files code for services, but a continue on protocol mismatch that doesn't affect nss_files skipped the code that advanced to the next db entry. Any one of these changes would suffice to fix it, but fixing both makes them both safer to reuse elsewhere. for ChangeLog [BZ #14498] * NEWS: Fixed. * nss/nss_db/db-XXX.c (_nss_db_get##name##_r): Update hidx after parsing line but before break_if_match. * nss/nss_files/files-service (DB_LOOKUP): Don't "continue;" if there is a protocol mismatch.
2014-11-19Add new macro IN_MODULE to identify module in which source is builtSiddhesh Poyarekar1-1/+2
The current scheme to identify which module a translation unit is built in depends on defining multiple macros IS_IN_* and also defining NOT_IN_libc if we're building a non-libc module. In addition, there is an IN_LIB macro that does effectively the same thing, but for different modules (notably the systemtap probes). This macro scheme unifies both ideas to use just one macro IN_MODULE and assign it a value depending on the module it is being built into. If the module is not defined, it defaults to MODULE_libc. Patches that follow will replace uses of IS_IN_* variables with the IS_IN() macro. libc-symbols.h has been converted already to give an example of how such a transition will look. Verified that there are no relevant binary changes. One source change that will crop up repeatedly is that of nscd_stat, since it uses the build timestamp as a constant in its logic. * Makeconfig (in-module): Get value of libof set for the translation unit. (CPPFLAGS): Use $(in-module). * Makerules: Don't suffix routine names for nonlib. * include/libc-modules.h: New file. * include/libc-symbols.h: Include libc-modules.h (IS_IN): New macro to replace IS_IN_* macros. * elf/Makefile: Set libof-* for each routine. * elf/rtld-Rules: Likewise. * extra-modules.mk: Likewise. * iconv/Makefile: Likewise. * iconvdata/Makefile: Likewise. * locale/Makefile: Likewise. * malloc/Makefile: Likewise. * nss/Makefile: Likewise. * sysdeps/gnu/Makefile: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile: Likewise. * sysdeps/unix/sysv/linux/Makefile: Likewise. * sysdeps/s390/s390-64/Makefile: Likewise. * nscd/Makefile: Set libof-* for each routine. Set CFLAGS and CPPFLAGS for nscd instead of nonlib.
2014-11-05Modify several tests to use test-skeleton.cArjun Shankar1-2/+5
This patch modifies several test cases to use test-skeleton.c. It was generated by a bash script written for this purpose and thus excludes several other tests which I deemed worth a visual inspection before making the change. I intend to follow up with individual patches to the tests skipped by the script. The script itself resides at http://git.io/WODAmg and should reproduce this very patch when run against master. ChangeLog: 2014-10-30 Arjun Shankar <arjun.is@lostca.se> * catgets/test-gencat.c: Use test-skeleton.c. * catgets/tst-catgets.c: Likewise. * csu/tst-empty.c: Likewise. * elf/tst-audit2.c: Likewise. * elf/tst-global1.c: Likewise. * elf/tst-pathopt.c: Likewise. * elf/tst-piemod1.c: Likewise. * elf/tst-tls10.c: Likewise. * elf/tst-tls11.c: Likewise. * elf/tst-tls12.c: Likewise. * gnulib/tst-gcc.c: Likewise. * iconvdata/tst-e2big.c: Likewise. * iconvdata/tst-loading.c: Likewise. * iconv/tst-iconv1.c: Likewise. * iconv/tst-iconv2.c: Likewise. * inet/test-inet6_opt.c: Likewise. * inet/tst-gethnm.c: Likewise. * inet/tst-network.c: Likewise. * inet/tst-ntoa.c: Likewise. * intl/tst-codeset.c: Likewise. * intl/tst-gettext2.c: Likewise. * intl/tst-gettext3.c: Likewise. * intl/tst-ngettext.c: Likewise. * intl/tst-translit.c: Likewise. * io/test-stat.c: Likewise. * libio/test-fmemopen.c: Likewise. * libio/tst-freopen.c: Likewise. * libio/tst-sscanf.c: Likewise. * libio/tst-ungetwc1.c: Likewise. * libio/tst-ungetwc2.c: Likewise. * libio/tst-widetext.c: Likewise. * localedata/tst-ctype.c: Likewise. * localedata/tst-digits.c: Likewise. * localedata/tst-leaks.c: Likewise. * localedata/tst-mbswcs1.c: Likewise. * localedata/tst-mbswcs2.c: Likewise. * localedata/tst-mbswcs3.c: Likewise. * localedata/tst-mbswcs4.c: Likewise. * localedata/tst-mbswcs5.c: Likewise. * localedata/tst-setlocale.c: Likewise. * localedata/tst-trans.c: Likewise. * localedata/tst-wctype.c: Likewise. * localedata/tst-xlocale1.c: Likewise. * login/tst-grantpt.c: Likewise. * malloc/tst-calloc.c: Likewise. * malloc/tst-malloc.c: Likewise. * malloc/tst-mallocstate.c: Likewise. * malloc/tst-mcheck.c: Likewise. * malloc/tst-mtrace.c: Likewise. * malloc/tst-obstack.c: Likewise. * math/atest-exp2.c: Likewise. * math/atest-exp.c: Likewise. * math/atest-sincos.c: Likewise. * math/test-matherr.c: Likewise. * math/test-misc.c: Likewise. * math/test-powl.c: Likewise. * math/tst-definitions.c: Likewise. * misc/tst-dirname.c: Likewise. * misc/tst-efgcvt.c: Likewise. * misc/tst-fdset.c: Likewise. * misc/tst-hsearch.c: Likewise. * misc/tst-mntent2.c: Likewise. * nptl/tst-sem7.c: Likewise. * nptl/tst-sem8.c: Likewise. * nptl/tst-sem9.c: Likewise. * nss/test-netdb.c: Likewise. * posix/tst-fnmatch.c: Likewise. * posix/tst-getlogin.c: Likewise. * posix/tst-gnuglob.c: Likewise. * posix/tst-mmap.c: Likewise. * pwd/tst-getpw.c: Likewise. * resolv/tst-inet_ntop.c: Likewise. * rt/tst-timer.c: Likewise. * stdio-common/test-fseek.c: Likewise. * stdio-common/test-popen.c: Likewise. * stdio-common/test-vfprintf.c: Likewise. * stdio-common/tst-cookie.c: Likewise. * stdio-common/tst-fileno.c: Likewise. * stdio-common/tst-gets.c: Likewise. * stdio-common/tst-obprintf.c: Likewise. * stdio-common/tst-perror.c: Likewise. * stdio-common/tst-sprintf2.c: Likewise. * stdio-common/tst-sprintf3.c: Likewise. * stdio-common/tst-sprintf.c: Likewise. * stdio-common/tst-swprintf.c: Likewise. * stdio-common/tst-tmpnam.c: Likewise. * stdio-common/tst-unbputc.c: Likewise. * stdio-common/tst-wc-printf.c: Likewise. * stdlib/tst-environ.c: Likewise. * stdlib/tst-fmtmsg.c: Likewise. * stdlib/tst-limits.c: Likewise. * stdlib/tst-rand48-2.c: Likewise. * stdlib/tst-rand48.c: Likewise. * stdlib/tst-random2.c: Likewise. * stdlib/tst-random.c: Likewise. * stdlib/tst-strtol.c: Likewise. * stdlib/tst-strtoll.c: Likewise. * stdlib/tst-tls-atexit.c: Likewise. * stdlib/tst-xpg-basename.c: Likewise. * string/test-ffs.c: Likewise. * string/tst-bswap.c: Likewise. * string/tst-inlcall.c: Likewise. * string/tst-strtok.c: Likewise. * string/tst-strxfrm.c: Likewise. * sysdeps/x86_64/tst-audit10.c: Likewise. * sysdeps/x86_64/tst-audit3.c: Likewise. * sysdeps/x86_64/tst-audit4.c: Likewise. * sysdeps/x86_64/tst-audit5.c: Likewise. * time/tst-ftime_l.c: Likewise. * time/tst-getdate.c: Likewise. * time/tst-mktime3.c: Likewise. * time/tst-mktime.c: Likewise. * time/tst-posixtz.c: Likewise. * time/tst-strptime2.c: Likewise. * time/tst-strptime3.c: Likewise. * wcsmbs/tst-btowc.c: Likewise. * wcsmbs/tst-mbrtowc.c: Likewise. * wcsmbs/tst-mbsrtowcs.c: Likewise. * wcsmbs/tst-wchar-h.c: Likewise. * wcsmbs/tst-wcpncpy.c: Likewise. * wcsmbs/tst-wcrtomb.c: Likewise. * wcsmbs/tst-wcsnlen.c: Likewise. * wcsmbs/tst-wcstof.c: Likewise.
2014-06-25Remove stray includes of kernel-features.h.Joseph Myers1-1/+0
Now that files using __ASSUME_* macros have been made by <https://sourceware.org/ml/libc-alpha/2014-06/msg00543.html> to include <kernel-features.h> directly, any include from a file not using __ASSUME_* macros can safely be removed (as there will no longer be some other file relying on indirect inclusion via a header from which the include is being removed). This patch removes such unnecessary kernel-features.h includes. Tested x86_64 that disassembly of installed shared libraries is unchanged by this patch, except for line numbers in calls to __assert_fail from libc.so and ld.so. 2014-06-23 Joseph Myers <joseph@codesourcery.com> * nptl/createthread.c: Don't include kernel-features.h. * nptl/pthread_cancel.c: Likewise. * nptl/pthread_condattr_setclock.c: Likewise. * nptl/sysdeps/unix/sysv/linux/pt-raise.c: Likewise. * nptl/sysdeps/unix/sysv/linux/pthread_getcpuclockid.c: Likewise. * nptl/sysdeps/unix/sysv/linux/pthread_kill.c: Likewise. * nptl/sysdeps/unix/sysv/linux/pthread_sigqueue.c: Likewise. * nptl/sysdeps/unix/sysv/linux/raise.c: Likewise. * nptl/sysdeps/unix/sysv/linux/s390/s390-32/pt-vfork.S: Likewise. * nptl/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * nptl/sysdeps/unix/sysv/linux/s390/s390-64/pt-vfork.S: Likewise. * nptl/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * nptl/sysdeps/unix/sysv/linux/timer_create.c: Likewise. * nptl/sysdeps/unix/sysv/linux/timer_delete.c: Likewise. * nptl/sysdeps/unix/sysv/linux/timer_getoverr.c: Likewise. * nptl/sysdeps/unix/sysv/linux/timer_gettime.c: Likewise. * nptl/sysdeps/unix/sysv/linux/timer_routines.c: Likewise. * nptl/sysdeps/unix/sysv/linux/timer_settime.c: Likewise. * nscd/gai.c: Likewise. * nss/nss_db/db-open.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/sh/nptl/tls.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/adjtime.c: Likewise. * sysdeps/unix/sysv/linux/alpha/xstatconv.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/check_pf.c: Likewise. * sysdeps/unix/sysv/linux/clock_getcpuclockid.c: Likewise. * sysdeps/unix/sysv/linux/clock_getres.c: Likewise. * sysdeps/unix/sysv/linux/clock_gettime.c: Likewise. * sysdeps/unix/sysv/linux/clock_nanosleep.c: Likewise. * sysdeps/unix/sysv/linux/clock_settime.c: Likewise. * sysdeps/unix/sysv/linux/dl-execstack.c: Likewise. * sysdeps/unix/sysv/linux/dl-osinfo.h: Likewise. * sysdeps/unix/sysv/linux/dl-sysdep.c: Likewise. * sysdeps/unix/sysv/linux/generic/futimesat.c: Likewise. * sysdeps/unix/sysv/linux/generic/poll.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/fcntl.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pread.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pread64.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/preadv.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/preadv64.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev64.c: Likewise. * sysdeps/unix/sysv/linux/getcwd.c: Likewise. * sysdeps/unix/sysv/linux/getpagesize.c: Likewise. * sysdeps/unix/sysv/linux/getsysstats.c: Likewise. * sysdeps/unix/sysv/linux/i386/fxstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/lxstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/mmap.S: Likewise. * sysdeps/unix/sysv/linux/i386/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/i386/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/xstat.c: Likewise. * sysdeps/unix/sysv/linux/ia64/system.c: Likewise. * sysdeps/unix/sysv/linux/if_index.c: Likewise. * sysdeps/unix/sysv/linux/ifaddrs.c: Likewise. * sysdeps/unix/sysv/linux/ifreq.c: Likewise. * sysdeps/unix/sysv/linux/ldsodefs.h: Likewise. * sysdeps/unix/sysv/linux/lutimes.c: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/microblaze/nptl/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/accept4.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/recvmmsg.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/sendmmsg.c: Likewise. * sysdeps/unix/sysv/linux/mips/pread.c: Likewise. * sysdeps/unix/sysv/linux/mips/pread64.c: Likewise. * sysdeps/unix/sysv/linux/mips/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/mips/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/mips/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/netlinkaccess.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_mask.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_nomask.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pread.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pread64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_mask.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_nomask.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/getcontext.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/makecontext.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pread.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pread64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/pread.c: Likewise. * sysdeps/unix/sysv/linux/pread64.c: Likewise. * sysdeps/unix/sysv/linux/prof-freq.c: Likewise. * sysdeps/unix/sysv/linux/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise. * sysdeps/unix/sysv/linux/s390/system.c: Likewise. * sysdeps/unix/sysv/linux/sh/pread.c: Likewise. * sysdeps/unix/sysv/linux/sh/pread64.c: Likewise. * sysdeps/unix/sysv/linux/sh/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/sh/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/sigpending.c: Likewise. * sysdeps/unix/sysv/linux/sigprocmask.c: Likewise. * sysdeps/unix/sysv/linux/sigsuspend.c: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/xstatconv.c: Likewise. * sysdeps/unix/sysv/linux/sparc/system.c: Likewise. * sysdeps/unix/sysv/linux/syslog.c: Likewise. * sysdeps/unix/sysv/linux/system.c: Likewise. * sysdeps/unix/sysv/linux/testrtsig.h: Likewise. * sysdeps/unix/sysv/linux/timespec_get.c: Likewise. * sysdeps/unix/sysv/linux/ttyname.c: Likewise. * sysdeps/unix/sysv/linux/ttyname_r.c: Likewise. * sysdeps/unix/sysv/linux/utimensat.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/xstatconv.h: Likewise.
2014-06-23Don't ignore too long lines in nss_files (BZ #17079)Andreas Schwab1-1/+3
2014-05-26Use NSS_STATUS_TRYAGAIN to indicate insufficient buffer (BZ #16878)Siddhesh Poyarekar1-1/+1
The netgroups nss modules in the glibc tree use NSS_STATUS_UNAVAIL (with errno as ERANGE) when the supplied buffer does not have sufficient space for the result. This is wrong, because the canonical way to indicate insufficient buffer is to set the errno to ERANGE and the status to NSS_STATUS_TRYAGAIN, as is used by all other modules. This fixes nscd behaviour when the nss_ldap module returns NSS_STATUS_TRYAGAIN to indicate that a netgroup entry is too long to fit into the supplied buffer.
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers1-2/+2
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-10Use glibc_likely instead __builtin_expect.Ondřej Bílka1-1/+1
2014-01-27Fix invalid memory access when parsing netgroup files with blank lines (BZ ↵Siddhesh Poyarekar1-1/+2
#16506) The netgroups file parsing code tries to access the character before the newline in parsed lines to see if it is a backslash (\). This results in an access before the block allocated for the line if the line is blank, i.e. does not have anything other than the newline character. This doesn't seem like it will cause any crashes because the byte belongs to the malloc metadata block and hence access to it will always succeed. There could be an invalid alteration in code flow where a blank line is seen as a continuation due to the preceding byte *happening* to be '\\'. This could be done by interposing malloc, but that's not really a security problem since one could interpose getnetgrent_r itself and achieve a similar 'exploit'. The possibility of actually exploiting this is remote to impossible since it also requires the previous line to end with a '\\', which would happen only on invalid configurations.
2014-01-01Update remaining copyright datesAllan McRae2-2/+2
Update copyright years that are not handled by scripts/update-copyright.
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae56-56/+56
2013-12-02Use herrnop directlySiddhesh Poyarekar1-2/+2
H_ERRNO_ARGS is unnecessary since we this file is specifically for hosts lookup.
2013-11-28Get canonical name in getaddrinfo from hosts file for AF_INET (fixes 16077)Siddhesh Poyarekar2-250/+258
AF_INET lookup in hosts file uses _nss_files_gethostbyname2_r, which is not capable of returning a canonical name if it has found one. This change adds _nss_files_gethostbyname3_r, which wraps around _nss_files_gethostbyname2_r and then returns result.h_name as the canonical name.
2013-11-07Make getent services compliant with RFC 6335 section 5.1 Fixes bug 15374Ondřej Bílka1-2/+6
The RFC 6335 allows services that start with digit (like 3com-tsmux). These were parsed as port number which this patch fixes.
2013-10-30Fix reads for sizes larger than INT_MAX in AF_INET lookupSiddhesh Poyarekar1-8/+51
Currently for AF_INET lookups from the hosts file, buffer sizes larger than INT_MAX silently overflow and may result in access beyond bounds of a buffer. This happens when the number of results in an AF_INET lookup in /etc/hosts are very large. There are two aspects to the problem. One problem is that the size computed from the buffer size is stored into an int, which results in overflow for large sizes. Additionally, even if this size was expanded, the function used to read content into the buffer (fgets) accepts only int sizes. As a result, the fix is to have a function wrap around fgets that calls it multiple times with int sizes if necessary.
2013-08-26Use proper #include for xdecrypt declarations.Roland McGrath1-3/+1
2013-06-06Fix leading whitespaces.Ondrej Bilka1-1/+1
2013-05-31Link extra-libs consistently with libc and ld.so.Joseph Myers1-7/+5