aboutsummaryrefslogtreecommitdiff
path: root/nss/getXXbyYY_r.c
AgeCommit message (Collapse)AuthorFilesLines
2024-01-01Update copyright dates with scripts/update-copyrightsPaul Eggert1-1/+1
2023-01-06Update copyright dates with scripts/update-copyrightsJoseph Myers1-1/+1
2022-01-01Update copyright dates with scripts/update-copyrightsPaul Eggert1-1/+1
I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: *** 912-#endif remote: *** 913: remote: *** 914- remote: *** error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2021-09-03Remove "Contributed by" linesSiddhesh Poyarekar1-1/+0
We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-01-02Update copyright dates with scripts/update-copyrightsPaul Eggert1-1/+1
I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
2020-12-04nsswitch: use new internal API (callers)DJ Delorie1-46/+5
Stitch new ABI and types throughout all NSS callers. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2020-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers1-1/+1
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert1-1/+1
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers1-1/+1
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers1-1/+1
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-08-13NSS: Do not use internal_function for functions with hidden aliasesFlorian Weimer1-2/+1
Such functions are called across DSO boundaries and should not use a non-standard ABI.
2017-08-09nss: Call __resolv_context_put before early return in get*_r [BZ #21932]Florian Weimer1-1/+9
This corrects an oversight introduced in commit 352f4ff9a268b81ef5d4b2413f582565806e4790 (resolv: Introduce struct resolv_context).
2017-07-03resolv: Introduce struct resolv_context [BZ #21668]Florian Weimer1-14/+20
struct resolv_context objects provide a temporary resolver context which does not change during a name lookup operation. Only when the outmost context is created, the stub resolver configuration is verified to be current (at present, only against previous res_init calls). Subsequent attempts to obtain the context will reuse the result of the initial verification operation. struct resolv_context can also be extended in the future to store data which needs to be deallocated during thread cancellation.
2017-06-27resolv: Call _res_hconf_init from __res_vinitFlorian Weimer1-6/+0
Many callers of __res_maybe_init also call _res_hconf_init. Additional calls to the latter do not hurt because the function does its work only once. (/etc/hosts.conf is not reloaded or even checked for changes.) This means that we can simplify the code by calling _res_hconf_init directly from __res_vinit.
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers1-1/+1
2016-08-18Fix incorrect double-checked locking related to _res_hconf.initialized.Torvald Riegel1-2/+1
_res_hconf.initialized was not suitable for use in a multi-threaded environment due to the lack of atomics and memory barriers. Use of it was also unnecessary because _res_hconf_init did the right thing by using __libc_once. This patch fixes the glibc-internal uses by just calling _res_hconf_init unconditionally, and switches to a release MO atomic store for _res_hconf.initialized to fix the glibc side of the synchronization problem (which will maintain backward compatibility, but cannot fix the lack of acquire MO on any glibc-external loads). [BZ #20477] * resolv/res_hconf.c (do_init): Use atomic access. * resolv/res_hconf.h: Add comments. * nscd/aicache.c (addhstaiX): Call _res_hconf_init unconditionally. * nss/getXXbyYY_r.c (REENTRANT_NAME): Likewise. * sysdeps/posix/getaddrinfo.c (gaih_inet): Likewise.
2016-04-29NSS: Implement group merging support.Stephen Gallagher1-2/+108
https://sourceware.org/glibc/wiki/Proposals/GroupMerging == Justification == It is common today for users to rely on centrally-managed user stores for handling their user accounts. However, much software existing today does not have an innate understanding of such accounts. Instead, they commonly rely on membership in known groups for managing access-control (for example the "wheel" group on Fedora and RHEL systems or the "adm" group on Debian-derived systems). In the present incarnation of nsswitch, the only way to have such groups managed by a remote user store such as FreeIPA or Active Directory would be to manually remove the groups from /etc/group on the clients so that nsswitch would then move past nss_files and into the SSSD, nss-ldap or other remote user database. == Solution == With this patch, a new action is introduced for nsswitch: NSS_ACTION_MERGE. To take advantage of it, one will add [SUCCESS=merge] between two database entries in the nsswitch.conf file. When a group is located in the first of the two group entries, processing will continue on to the next one. If the group is also found in the next entry (and the group name and GID are an exact match), the member list of the second entry will be added to the group object to be returned. == Implementation == After each DL_LOOKUP_FN() returns, the next action is checked. If the function returned NSS_STATUS_SUCCESS and the next action is NSS_ACTION_MERGE, a copy of the result buffer is saved for the next pass through the loop. If on this next pass through the loop the database returns another instance of a group matching both the group name and GID, the member list is added to the previous list and it is returned as a single object. If the following database does not contain the same group, then the original is copied back into the destination buffer. This patch implements merge functionality only for the group database. For other databases, there is a default implementation that will return the EINVAL errno if a merge is requested. The merge functionality can be implemented for other databases at a later time if such is needed. Each database must provide a unique implementation of the deep-copy and merge functions. If [SUCCESS=merge] is present in nsswitch.conf for a glibc version that does not support it, glibc will process results up until that operation, at which time it will return results if it has found them or else will simply return an error. In practical terms, this ends up behaving like the remainder of the nsswitch.conf line does not exist. == Iterators == This feature does not modify the iterator functionality from its current behavior. If getgrnam() or getgrgid() is called, glibc will iterate through all entries in the `group` line in nsswitch.conf and display the list of members without attempting to merge them. This is consistent with the behavior of nss_files where if two separate lines are specified for the same group in /etc/groups, getgrnam()/getgrgid() will display both. Clients are already expected to handle this gracefully. == No Premature Optimizations == The following is a list of places that might be eligible for optimization, but were not overengineered for this initial contribution: * Any situation where a merge may occur will result in one malloc() of the same size as the input buffer. * Any situation where a merge does occur will result in a second malloc() to hold the list of pointers to member name strings. * The list of members is simply concatenated together and is not tested for uniqueness (which is identical to the behavior for nss_files, which will simply return identical values if they both exist on the line in the file. This could potentially be optimized to reduce space usage in the buffer, but it is both complex and computationally expensive to do so. == Testing == I performed testing by running the getent utility against my newly-built glibc and configuring /etc/nsswitch.conf with the following entry: group: group: files [SUCCESS=merge] sss In /etc/group I included the line: wheel:x:10:sgallagh I then configured my local SSSD using the id_provider=local to respond with: wheel:*:10:localuser,localuser2 I then ran `getent group wheel` against the newly-built glibc in multiple situations and received the expected output as described above: * When SSSD was running. * When SSSD was configured in nsswitch.conf but the daemon was not running. * When SSSD was configured in nsswitch.conf but nss_sss.so.2 was not installed on the system. * When the order of 'sss' and 'files' was reversed. * All of the above with the [SUCCESS=merge] removed (to ensure no regressions). * All of the above with `getent group 10`. * All of the above with `getent group` with and without `enumerate=true` set in SSSD. * All of the above with and without nscd enabled on the system.
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers1-1/+1
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers1-1/+1
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae1-1/+1
2013-05-21Set EAI_SYSTEM only when h_errno is NETDB_INTERNALSiddhesh Poyarekar1-4/+4
Fixes BZ #15339. NSS_STATUS_UNAVAIL may mean that a necessary input resource is not available. This could occur in a number of cases including when the network is down, system runs out of file descriptors, etc. The correct differentiator in such a case is the h_errno, which gives the nature of failure. In case of failures other than a simple 'not found', we set h_errno as NETDB_INTERNAL and let errno be the identifier for the exact error.
2013-05-21Fix parsing of numeric hosts in gethostbyname_rAndreas Schwab1-1/+4
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers1-1/+1
2012-11-19Return EAI_SYSTEM if we're out of file descriptorsSiddhesh Poyarekar1-1/+6
Resolves BZ #14719.
2012-10-30Suppress incorrect link warnings for NSS symbolsChris Metcalf1-1/+1
When glibc is built with --enable-static-nss, the warning that using NSS symbols requires the nss shared objects to be present is no longer true, as those symbols are built into libc. Suppress the warning for those symbols by providing a new macro (nss_interface_function) for the NSS functions that is defined as static_link_warning in the normal case, and empty for static NSS.
2012-08-04getXXbyYY_r.c: Fix comment typo: s/FUNCTION_NAME/FUNCTION2_NAME/Jim Meyering1-1/+1
2012-07-31Conditionalize use of PTR_MANGLE.Roland McGrath1-2/+10
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert1-3/+2
2010-08-11Add self-contained test for NSS.Ulrich Drepper1-2/+5
While at it fix interaction between __nss_configure_lookup and nscd. Otherwise the test fails if nscd is runnung.
2009-05-10* version.h (VERSION): Bump to 2.10.1.cvs/fedora-glibc-20090510T1842cvs/masterUlrich Drepper1-2/+4
* nss/getXXbyYY_r.c: If NO_COMPAT_NEEDED is defined don't define any compatibility functions. * nss/getXXent_r.c: Likewise. * gshadow/getsgent_r.c: Define NO_COMPAT_NEEDED. * gshadow/getsgnam_r.c: Likewise. * gshadow/Version: Remove duplicate entries. * sysdeps/x86_64/cacheinfo.c (intel_02_cache_info): Add missing entries for recent processor. * sysdeps/unix/sysv/linux/i386/sysconf.c (intel_02_cache_info): Likewise.
2007-10-30* nscd/Makefile (nscd-modules): Replace gethstbynm2_r withUlrich Drepper1-17/+46
gethstbynm3_r. * nscd/gethstbynm2_r.c: Remove. * nscd/gethstbynm3_r.c: New file. * nscd/aicache.c (addhstaiX): Use __gethostbyaddr2_r instead of __gethostbyaddr_r. * nscd/gethstbyad_r.c: Generate __gethostbyaddr2_r function. Define __gethostbyaddr_r compatibility wrapper. * nscd/hstcache.c (cache_addhst): Add ttl parameter. Use it when determining timeout of entry. (lookup): Take new parameter and pass it to __gethostbyname3_r and __gethostbyaddr2_r. (addhstbyX): Pass reference to variable for TTL to lookup and cache_addhst. * nss/Versions [glibc] (GLIBC_PRIVATE): Export __nss_passwd_lookup2, __nss_group_lookup2, __nss_hosts_lookup2, __nss_services_lookup2, and __nss_next2. Remove __nss_services_lookup. * nss/XXX-lookup.c: Name function now *_lookup2. Add new parameter. Add compat wrapper. * nss/getXXbyYY_r.c: Changes to call new *_lookup2 functions and __nss_next2. * nss/getXXent_r.c: Likewise. * nss/getnssent_r.c: Likewise. * nss/nsswitch.c (__nss_lookup): Add new parameter. If first function does not exist in module, try the optional second name. (__nss_next2): New function. (__nss_next): Now wrapper around __nss_next2. * nss/nsswitch.h: Adjust __nss_lookup prototype. Declare __nss_next2. Adjust definition of db_lookup_function type. * nss/service-lookup.c: Define NO_COMPAT. * include/netdb.h: Declare __gethostbyaddr2_r and __gethostbyname3_r. * inet/ether_hton.c: Use __nss_next2 instead of __nss_next. * inet/ether_ntoh.c: Likewise. * sunrpc/netname.c: Likewise. * sunrpc/publickey.c: Likewise. * inet/getnetgrent.c: Likewise. Adjust calls to __nss_lookup. * inet/gethstbyad_r.c (DB_LOOKUP_FCT): Change to __nss_hosts_lookup2. * inet/gethstbynm2_r.c (DB_LOOKUP_FCT): Likewise. * inet/gethstbynm_r.c (DB_LOOKUP_FCT): Likewise. * inet/gethstent_r.c (DB_LOOKUP_FCT): Likewise. * nscd/aicache.c (addhstaiX): Fix default TTL handling. * inet/getnetgrent.c (setup): Encrypt static pointer.
2007-10-15(REENTRANT_NAME): Mangle start and start_fct pointers.Ulrich Drepper1-8/+24
2006-12-19* nss/getXXbyYY_r.c: Include atomic.h.cvs/fedora-glibc-20061219T1804Ulrich Drepper1-4/+7
(INTERNAL (REENTRANT_NAME)): Write startp after start_fct, add atomic_write_barrier () in between.
2004-12-22(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.Ulrich Drepper1-7/+4
2007-07-122.5-18.1Jakub Jelinek1-4/+7
2004-09-16iAdd __nscd_getai prototype.Ulrich Drepper1-3/+0
2004-08-05Update.Ulrich Drepper1-1/+1
2004-08-04 Jakub Jelinek <jakub@redhat.com> * hesiod/hesiod.c (__hesiod_res_get): Use calloc instead of malloc + memset. (__hesiod_res_set): Free nsaddrs. * include/resolv.h (__res_maybe_init): Add prototype. * resolv/resolv.h (struct __res_state): Add _u._ext.initstamp field. * resolv/Versions (libc): Add __res_maybe_init@@GLIBC_PRIVATE. * resolv/res_libc.c (__res_initstamp, lock): New variables. (res_init): Increase __res_initstamp. (__res_maybe_init): New function. * resolv/res_init.c (__res_vinit): Initialize _u._ext.initstamp. * hesiod/hesiod.c (__hesiod_res_get): Use __res_maybe_init instead of RES_INIT check and {res_ninit,__res_ninit,res_init} call. * sysdeps/posix/getaddrinfo.c (gaih_inet): Likewise. * resolv/nss_dns/dns-host.c (_nss_dns_gethostbyname2_r, _nss_dns_gethostbyaddr_r): Likewise. * resolv/nss_dns/dns-network.c (_nss_dns_getnetbyname_r, _nss_dns_getnetbyaddr_r): Likewise. * resolv/gethnamaddr.c (gethostbyname, gethostbyname2, gethostbyaddr): Likewise. * resolv/res_data.c (fp_nquery, res_mkquery, res_mkupdate, res_isourserver, res_sendsigned, res_update, res_search, res_querydomain): Likewise. * nss/getXXbyYY_r.c (INTERNAL (REENTRANT_NAME)): Likewise. * nss/digits_dots.c (__nss_hostname_digits_dots): Likewise. * nss/getnssent_r.c (__nss_setent, __nss_endent, __nss_getent_r): Likewise. * sysdeps/posix/getaddrinfo.c (gaih_inet): Set ai_family for V4-mapped IPv6 addresses and req->ai_family==AF_INET. Reported by A. Guru <a.guru@sympatico.ca>. * po/pl.po: Likewise. characters than necessary.
2004-05-26Update.Ulrich Drepper1-9/+3
2004-05-25 Ulrich Drepper <drepper@redhat.com> * nss/digits_dots.c (__nss_hostname_digits_dots): Remove typep and flags parameter, convert afp to simple int parameter. Adjust code. typep was never != NULL and flags therefore also unused. *afp is never modified. * nss/nsswitch.h: Adjust __nss_hostname_digits_dots prototype. * nss/getXXbyYY.c: Remove HAVE_TYPE handling. Adjust af parameter handling for __nss_hostname_digits_dots calls. * nss/getXXbyYY_r.c: Likewise. * elf/dl-load.c (_dl_map_object_from_fd): Map DSOs with MAP_DENYWRITE.
2004-03-29Update.Ulrich Drepper1-1/+1
2004-03-29 Ulrich Drepper <drepper@redhat.com> * nss/getXXbyYY_r.c: Return 0 for NSS_STATUS_NOTFOUND.
2004-03-10Update.Ulrich Drepper1-0/+1
2004-03-10 Ulrich Drepper <drepper@redhat.com> * include/libc-symbols.h: Define attribute_compat_text_section and attribute_compat_data_section. * io/ftw.c: Mark compat code with attribute_compat_text_section. * libio/iofopncook.c: Likewise. * libio/oldfileops.c: Likewise. * libio/oldiofclose.c: Likewise. * libio/oldiofdopen.c: Likewise. * libio/oldiofgetpos.c: Likewise. * libio/oldiofgetpos64.c: Likewise. * libio/oldiofopen.c: Likewise. * libio/oldiofsetpos.c: Likewise. * libio/oldiofsetpos64.c: Likewise. * libio/oldiopopen.c: Likewise. * libio/oldpclose.c: Likewise. * libio/oldtmpfile.c: Likewise. * nptl/forward.c: Likewise. * nss/getXXbyYY_r.c: Likewise. * nss/getXXent_r.c: Likewise. * posix/tst-vfork1.c: Likewise. * stdlib/canonicalize.c: Likewise. * stdlib/old_atexit.c: Likewise. * sysdeps/generic/glob.c: Likewise. * sysdeps/posix/posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/i386/alphasort64.c: Likewise. * sysdeps/unix/sysv/linux/i386/chown.c: Likewise. * sysdeps/unix/sysv/linux/i386/glob64.c: Likewise. * sysdeps/unix/sysv/linux/i386/msgctl.c: Likewise. * sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/i386/posix_fadvise64.S: Likewise. * sysdeps/unix/sysv/linux/i386/readdir64.c: Likewise. * sysdeps/unix/sysv/linux/i386/readdir64_r.c: Likewise. * sysdeps/unix/sysv/linux/i386/scandir64.c: Likewise. * sysdeps/unix/sysv/linux/i386/semctl.c: Likewise. * sysdeps/unix/sysv/linux/i386/shmctl.c: Likewise. * sysdeps/unix/sysv/linux/i386/versionsort64.c: Likewise. * sysdeps/unix/sysv/linux/i386/syscalls.list: vm86@@GLIBC_2.3.4 should be the default symbol. Having none misses the point.
2004-02-27Update.Ulrich Drepper1-6/+3
2004-02-26 Ulrich Drepper <drepper@redhat.com> * nss/getXXbyYY_r.c: Pass result also to the nscd_* function. Don't set *result here. * nscd/nscd_proto.h: Add new argument for pointer to result pointer to all nscd_* functions. * nscd/nscd_getgr_r.c (nscd_getgr_r): Add new parameter. Store result pointer in the address provided by the new parameter if successful. Otherwise store NULL. Return zero if no entry found. (__nscd_getgrnam_r, __nscd_getgrgid_r): Add new parameter and pass it on. * nscd/nscd_gethst_r.c (nscd_gethst_r): Add new parameter. Store result pointer in the address provided by the new parameter if successful. Otherwise store NULL. Return zero if no entry found. (__nscd_gethostbyname_r, __nscd_gethostbyname2_r, __nscd_gethostbyaddr_r): Add new parameter and pass it on. * nscd/nscd_getpw_r.c (nscd_getpw_r): Add new parameter. Store result pointer in the address provided by the new parameter if successful. Otherwise store NULL. Return zero if no entry found. (__nscd_getpwnam_r, __nscd_getpwuid_r): Add new parameter and pass it on.
2003-09-04Update.Ulrich Drepper1-9/+8
2003-09-04 Ulrich Drepper <drepper@redhat.com> * nss/getXXbyYY.c (FUNCTION_NAME): Add a few casts. Remove unnecessary errno handling. * nss/getXXbyYY_r.c (INTERNAL): Use better variable name. Initialize it in all cases. Change it to be a bit more like the code we had before.
2003-09-04Update.Ulrich Drepper1-5/+16
2003-09-03 Ulrich Drepper <drepper@redhat.com> * nss/getXXbyYY_r.c (INTERNAL): Explicitly set errno and avoid returning ERANGE if this wasn't intended.
2003-06-16Update.Ulrich Drepper1-0/+2
2003-06-16 Thorsten Kukuk <kukuk@suse.de> * include/libc-symbols.h: Add static_link_warning macro. * grp/initgroups.c: Print linker warning if this function is called in a static linked binary. * nss/getXXbyYY.c: Likewise. * nss/getXXbyYY_r.c: Likewise. * nss/getXXent.c: Likewise. * nss/getXXent_r.c: Likewise. * sysdeps/posix/getaddrinfo.c: Likewise. 2003-06-16 Bruno Haible <bruno@clisp.org> * iconvdata/gconv-modules (ISO-8859-15): Add aliases ISO_8859-15, LATIN-9. (ISO-8859-16): Add aliases ISO_8859-16:2001, ISO_8859-16. (IBM1047): Add alias IBM-1047. (GBK): Add aliases MS936, WINDOWS-936. 2003-06-16 Jakub Jelinek <jakub@redhat.com> * sysdeps/unix/sysv/linux/xstatconv.c (__xstat_conv): Define even if defined __ASSUME_STAT64_SYSCALL && defined XSTAT_IS_XSTAT64. (__xstat64_conv): Change xstat_conv to __xstat_conv. Reported by Arnaud Desitter <arnaud.desitter@geography.oxford.ac.uk>.
2003-06-13Update.Ulrich Drepper1-5/+4
2003-06-12 Ulrich Drepper <drepper@redhat.com> * wcsmbs/wchar.h: Define wint_t in std namespace, too [PR libc/5034].
2003-06-12Update.Ulrich Drepper1-4/+6
* sysdeps/posix/getaddrinfo.c (gaih_inet): Set no_inet6_date alse if only PF_INET address is needed. * nss/getXXbyYY_r.c: Make sure we always return a nonzero value in case of an error.
2003-04-17Update.Ulrich Drepper1-1/+1
2003-04-17 Ulrich Drepper <drepper@redhat.com> * nss/getXXbyYY_r.c [USE_NSCD] (REENTRANT_NAME): Only retry contacting nscd if NOT_USENSCD_NAME > 0. * nss/nsswitch.c (__nss_disable_nscd): New function. * nss/nsswitch.h: Declare it. * nss/Versions [GLIBC_PRIVATE]: Export __nss_disable_nscd. * nscd/nscd.c (main): Call __nss_disable_nscd.
2003-02-18Update.Ulrich Drepper1-4/+3
* nss/getXXbyYY_r.c (REENTRANT_NAME): Return 0 is no entry has been found.
2002-11-10* nss/getXXent.c (GETFUNC_NAME): Use union type to avoid strict Andreas Jaeger1-20/+25
aliasing problem. * nss/getXXbyYY_r.c (INTERNAL): Likewise. * nss/getnssent_r.c (__nss_getent_r): Likewise. (__nss_setent): Likewise. (__nss_getent_r): Likewise. * inet/getnetgrent_r.c (innetgr): Likewise. (__internal_setnetgrent_reuse): Likewise. (internal_getnetgrent_r): Likewise. * inet/ether_hton.c (ether_hostton): Likewise. * inet/ether_ntoh.c (ether_ntohost): Likewise. * sunrpc/netname.c (netname2user): Likewise. * sunrpc/publickey.c (getpublickey): Likewise. (getsecretkey): Likewise.
2002-09-12* elf/dl-load.c (_dl_map_object_from_fd): Use l_addr instead ofRoland McGrath1-2/+0
l_map_start to adjust l_tls_initimage.