aboutsummaryrefslogtreecommitdiff
path: root/nptl_db
AgeCommit message (Collapse)AuthorFilesLines
2024-01-01Update copyright dates with scripts/update-copyrightsPaul Eggert46-46/+46
2023-06-02Fix all the remaining misspellings -- BZ 25337Paul Pluzhnikov2-2/+2
2023-06-01nptl_db/thread_dbP.h: fix warn unused resultFrédéric Bérat1-1/+3
Fix unused result warnings, detected when _FORTIFY_SOURCE is enabled in glibc. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2023-01-06Update copyright dates with scripts/update-copyrightsJoseph Myers46-46/+46
2022-06-08nptl_db: disable DT_RELR on libthread_db.soPaul E. Murphy1-0/+6
Some nptl tests inadvertently use the host's gdb to verify libthread_db.so, which is loaded with the host's runtime. This causes a couple of test failures when the host glibc does not support DT_RELR. The not correct, but simple, workaround is to build without DT_RELR as this library is otherwise likely to load on glibc 2.17 and newer today. This allows tst-pthread-gdb-attach{,-static} to continue working when testing on a gdb loaded with an older glibc. This avoids a failure in tst-pthread-gdb-attach similar to: Trying host libthread_db library: .../build/glibc/nptl_db/libthread_db.so.1. dlopen failed: /lib64/libc.so.6: version `GLIBC_ABI_DT_RELR' not found (required by .../build/glibc/nptl_db/libthread_db.so.1). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2022-01-01Update copyright dates with scripts/update-copyrightsPaul Eggert46-46/+46
I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: *** 912-#endif remote: *** 913: remote: *** 914- remote: *** error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2021-09-03Remove "Contributed by" linesSiddhesh Poyarekar38-38/+0
We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-06-29nptl_db: Re-use the ELF-to-abilist converter for ABI checkingFlorian Weimer2-12/+12
The previous approach uses readelf -DWs, which does not produce a stable output format (older binutils versions do not include symbol version information). This commit re-uses scripts/abilist.awk with a tweak to include GLIBC_PRIVATE symbols. This awk script is based on objdump -T output, which appears to be stable over time. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
2021-06-28nptl: Export libthread_db-used symbols under GLIBC_PRIVATEFlorian Weimer2-3/+5
This allows distributions to strip debugging information from libc.so.6 without impacting the debugging experience. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28nptl: Rename nptl_version to __nptl_versionFlorian Weimer2-2/+2
This prepares it for exporting as a dynamic symbol. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28nptl_db: Clean up main/rtld variable handlingFlorian Weimer2-10/+5
Most symbols are now in libc.so.6. The "main" (exempted from coverage checks) status is therefore not necessary. Use DB_MAIN_VARIABLE for the remaining separate symbol, __nptl_initial_report_events. DB_RTLD_VARIABLE is now unused, so remove it. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-06-28nptl_db: Install libthread_db under a regular implementation nameFlorian Weimer1-2/+0
Currently, the name is always libthread_db-1.0.so. It does not change with the glibc version, like the other libraries. GDB hard-codes libthread_db.so.1 (the soname), so this change does not affect loading libthread_db. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-06-22nptl: Move pthreadP.h into sysdeps directoryFlorian Weimer1-1/+1
This mirrors the situation on Hurd. These directories are on the include search part, so #include <pthreadP.h> works after this change on both Hurd and nptl. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-05-21nptl: Move pthread_create, thrd_create into libcFlorian Weimer2-6/+6
The symbols were moved using scripts/move-symbol-to-libc.py. The libpthread placeholder symbols need some changes because some symbol versions have gone away completely. But __errno_location@@GLIBC_2.0 still exists, so the GLIBC_2.0 version is still there. The internal __pthread_create symbol now points to the correct function, so the sysdeps/nptl/thrd_create.c override is no longer necessary. There was an issue how the hidden alias of pthread_getattr_default_np was defined, so this commit cleans up that aspects and removes the GLIBC_PRIVATE export altogether. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-05-17nptl: Move __nptl_create_event, __nptl_death_event into libcFlorian Weimer2-4/+8
In libthread_db, use the exported GLIBC_PRIVATE symbols directly instead of relying on _thread_db_* variables in libpthread (which used to be created by the DB_FUNCTION macros). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-05-17nptl: Move __nptl_initial_report_events into ld.so/startup codeFlorian Weimer3-6/+10
The initialization of the report_events TCB field is now performed in __tls_init_tp instead of __pthread_initialize_minimal_internal (in libpthread). The events interface is difficult to test because GDB stopped using it in 2015. The td_thr_get_info change to ignore lookup issues is enough to support GDB with this change. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-04-21nptl: Move __pthread_keys global variable into libcFlorian Weimer1-1/+1
This prepares moving pthread_exit, and later the pthread_key_create infrastructure. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-04-21nptl_db: Introduce DB_MAIN_ARRAY_VARIABLEFlorian Weimer2-0/+6
And document the reason for DB_ARRAY_VARIABLE. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-04-21nptl: Move internal __nptl_nthreads variable into libcFlorian Weimer1-1/+1
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-04-21nptl_db: Support different libpthread/ld.so load orders (bug 27744)Florian Weimer3-9/+11
libthread_db is loaded once GDB encounters libpthread, and at this point, ld.so may not have been processed by GDB yet. As a result, _rtld_global cannot be accessed by regular means from libthread_db. To make this work until GDB can be fixed, acess _rtld_global through a pointer stored in libpthread. The new test does not reproduce bug 27744 with --disable-hardcoded-path-in-tests, but is still a valid smoke test. With --enable-hardcoded-path-in-tests, it is necessary to avoid add-symbol-file because this can tickle a GDB bug. Fixes commit 1daccf403b1bd86370eb94edca794dc106d02039 ("nptl: Move stack list variables into _rtld_global"). Tested-by: Emil Velikov <emil.velikov@collabora.com>
2021-01-02Update copyright dates with scripts/update-copyrightsPaul Eggert46-46/+46
I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
2020-12-11treewide: fix incorrect spelling of indices in commentsDmitry V. Levin1-1/+1
Replace 'indeces' with 'indices', the most annoying of these typos were those found in elf.h which is a public header file copied to other projects.
2020-11-16nptl: Move stack list variables into _rtld_globalFlorian Weimer7-13/+70
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT, formerly __wait_lookup_done) can be implemented directly in ld.so, eliminating the unprotected GL (dl_wait_lookup_done) function pointer. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-10-08Avoid GCC 11 -Warray-parameter warnings [BZ #26686].Martin Sebor1-2/+2
Building Glibc with the latest GCC 11 also shows a couple of instances of the new -Warray-parameter warning in the thread db APIs. To avoid these, this patch changes the deefinitions of the two functions to match their definitions.
2020-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers46-46/+46
2019-11-12slotinfo in struct dtv_slotinfo_list should be flexible array [BZ #25097]Florian Weimer4-1/+14
GCC 10 will warn about subscribing inner length zero arrays. Use a GCC extension in csu/libc-tls.c to allocate space for the static_slotinfo variable. Adjust nptl_db so that the type description machinery does not attempt to determine the size of the flexible array member slotinfo. Change-Id: I51be146a7857186a4ede0bb40b332509487bdde8
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert46-46/+46
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-02-16Move remaining nptl_db headers to sysdeps/nptlFlorian Weimer2-553/+0
sys/procfs.h was already using this sysdeps directory. This avoids the need for nptl-specific wrapper headers under include/, a generic location in the source tree.
2019-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers48-48/+48
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2018-03-01nptl_db: Remove stale `match_pid' parameter from `iterate_thread_list'Maciej W. Rozycki1-4/+3
Complement commit c579f48edba8 ("Remove cached PID/TID in clone") and remove the `match_pid' parameter not used by `iterate_thread_list' any longer. Update call sites accordingly. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove `match_pid' parameter. (td_ta_thr_iter): Update accordingly.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers48-48/+48
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-09-01Move all old ChangeLogs to a top-level ChangeLog.old directory.Zack Weinberg1-347/+0
2017-03-01Narrowing the visibility of libc-internal.h even further.Zack Weinberg1-1/+1
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar to what was done with libc-diag.h, I have split the definitions of cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN to a new header, libc-pointer-arith.h. It then occurred to me that the remaining declarations in libc-internal.h are mostly to do with early initialization, and probably most of the files including it, even in the core code, don't need it anymore. Indeed, only 19 files actually need what remains of libc-internal.h. 23 others need libc-diag.h instead, and 12 need libc-pointer-arith.h instead. No file needs more than one of them, and 16 don't need any of them! So, with this patch, libc-internal.h stops including libc-diag.h as well as losing the pointer arithmetic macros, and all including files are adjusted. * include/libc-pointer-arith.h: New file. Define cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN here. * include/libc-internal.h: Definitions of above macros moved from here. Don't include libc-diag.h anymore either. * posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h. Don't include libc-internal.h. * debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c * io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c * nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c * string/strcoll_l.c, sysdeps/nacl/brk.c * sysdeps/unix/clock_settime.c * sysdeps/unix/sysv/linux/i386/get_clockfreq.c * sysdeps/unix/sysv/linux/ia64/get_clockfreq.c * sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c * sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c: Don't include libc-internal.h. * elf/get-dynamic-info.h, iconv/loop.c * iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h * misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h * nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c * soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c * sysdeps/ieee754/dbl-64/e_lgamma_r.c * sysdeps/ieee754/dbl-64/k_rem_pio2.c * sysdeps/ieee754/flt-32/e_lgammaf_r.c * sysdeps/ieee754/flt-32/k_rem_pio2f.c * sysdeps/ieee754/ldbl-128/k_tanl.c * sysdeps/ieee754/ldbl-128ibm/k_tanl.c * sysdeps/ieee754/ldbl-96/e_lgammal_r.c * sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h: Include libc-diag.h instead of libc-internal.h. * elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c * nptl/nptl-init.c, string/strcspn.c, string/strspn.c * malloc/malloc.c, sysdeps/i386/nptl/tls.h * sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h * sysdeps/unix/sysv/linux/spawni.c * sysdeps/x86_64/nptl/tls.h: Include libc-pointer-arith.h instead of libc-internal.h. * elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h * sysdeps/x86_64/atomic-machine.h: Add multiple include guard.
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers48-48/+48
2016-11-24Remove cached PID/TID in cloneAdhemerval Zanella3-62/+18
This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
2016-10-31Bug 20729: Include libc-internal.h where required.Carlos O'Donell1-0/+1
The original fix for bug 20729 failed to include libc-internal.h in the files that needed them and this caused build failures on machines that don't implicitly include this header. This commit fixes that by following the consensus rule that a header, if needed, should always be directly included.
2016-10-29Bug 20729: Fix building with -Os.Carlos O'Donell1-0/+9
This commit adds a new DIAG_IGNORE_Os_NEEDS_COMMENT which is only enabled when compiling with -Os. This allows developers working on -Os enabled builds to mark false-positive warnings without impacting the warnings emitted at -O2. Then using the new DIAG_IGNORE_Os_NEEDS_COMMENT we fix 6 warnings generated with GCC 5 to get -Os builds working again.
2016-09-23Installed-header hygiene (BZ#20366): obsolete BSD u_* types.Zack Weinberg1-1/+1
The types u_char, u_short, u_int, u_long, ushort, uint, ulong, u_int8_t, u_int16_t, u_int32_t, u_int64_t, quad_t, and u_quad_t are BSDisms that have never been standardized. While glibc should continue to *provide* these types for compatibility's sake, its public headers should not use them. The meat of this change was mechanically generated by the following shell command: perl -pi~ -e ' s/\b(__)?u_char\b/unsigned char/g; s/\b(__)?u_?short\b/unsigned short/g; s/\b(__)?u_?int\b/unsigned int/g; s/\b(__)?u_?long\b/unsigned long/g; s/\b(__)?u_int8_t\b/uint8_t/g; s/\b(__)?u_int16_t\b/uint16_t/g; s/\b(__)?u_int32_t\b/uint32_t/g; s/\b(__)?u_int64_t\b/uint64_t/g; s/\b(__)?u_quad_t\b/uint64_t/g; s/\b(__)?quad_t\b/uint64_t/g; ' $(grep -lE -e '\<((__)?(quad_t|u(short|int|long|_(char|short|int([0-9]+_t)?|long|quad_t))))\>' \ $(grep -LE '\<(_(SYS|BITS)_TYPES_H|rpc/(rpc|rpc_msg|types|xdr)\.h)\>' \ $(find . \( -false $(sed 's/^/-o -name /' all-installed-headers) \ \) -printf '%P\n' | sort -u))) where 'all-installed-headers' was a list of the basenames of all installed header files, manually extracted from the Makefiles. Non-installed wrapper headers in include/ are also adjusted, for consistency. I then manually fixed up indentation and line-wrapping. sys/types.h and bits/types.h are excluded because they must continue to define the u_* types (under __USE_MISC) for compatibility with applications. They do not use these types themselves. All headers that (transitively) include rpc/types.h are also excluded, for three reasons. First, the u_* types are defined by rpc/types.h, unconditionally (not just under __USE_MISC) so they are logically part of the SunRPC API. Second, many of those headers appear to be machine-generated. Third, it's my understanding that we are getting rid of as much of SunRPC as possible in the near future. (The one file under sunrpc/ that's touched, sunrpc/rpc/rpc_des.h, does *not* include rpc/types.h. This may itself be a bug.) After changing from u_intNN_t to uintNN_t, a number of headers now need to include stdint.h to pick up those types. It might be more hygenic, namespace-wise, to use __uintNN_t instead, but none of these headers are bound by ISO or POSIX to do so, and it's unlikely that anyone using them will be bothered. (The two files that were using __-prefixed versions of the u_types, sysdeps/mach/hurd/net/route.h and sysdeps/unix/sysv/linux/net/route.h, both already also contained uses of the unprefixed versions.) Some of these files directly included features.h and/or sys/cdefs.h, which I removed, as the style generally seems to be to let sys/types.h do that for us. (This does not change the set of definitions exposed by any header; sys/types.h unconditionally includes both features.h and sys/cdefs.h.) One file included asm/types.h unnecessarily. * bits/in.h, gmon/sys/gmon.h, inet/netinet/igmp.h * inet/protocols/routed.h, inet/protocols/talkd.h * inet/protocols/timed.h, io/fts.h, nptl_db/thread_db.h * resolv/arpa/nameser.h, resolv/resolv.h, sunrpc/rpc/rpc_des.h * sysdeps/generic/netinet/if_ether.h * sysdeps/generic/netinet/in_systm.h * sysdeps/generic/netinet/ip.h, sysdeps/generic/netinet/tcp.h * sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h * sysdeps/gnu/netinet/udp.h, sysdeps/mach/hurd/net/ethernet.h * sysdeps/mach/hurd/net/if_arp.h * sysdeps/mach/hurd/net/if_ppp.h * sysdeps/mach/hurd/net/route.h, sysdeps/mach/sys/reboot.h * sysdeps/unix/sysv/linux/bits/in.h * sysdeps/unix/sysv/linux/net/ethernet.h * sysdeps/unix/sysv/linux/net/if_arp.h * sysdeps/unix/sysv/linux/net/if_ppp.h * sysdeps/unix/sysv/linux/net/if_shaper.h * sysdeps/unix/sysv/linux/net/route.h * sysdeps/unix/sysv/linux/netinet/if_ether.h * sysdeps/unix/sysv/linux/netinet/if_fddi.h * sysdeps/unix/sysv/linux/netinet/if_tr.h * sysdeps/unix/sysv/linux/netipx/ipx.h * sysdeps/unix/sysv/linux/sys/acct.h * include/arpa/nameser.h, include/resolv.h: Change all uses of u_char to unsigned char, u_short and ushort to unsigned short, u_int and uint to unsigned int, u_long and ulong to unsigned long, u_int8_t to uint8_t, u_int16_t to uint16_t, u_int32_t to uint32_t, quad_t to int64_t, and u_int64_t and u_quad_t to uint64_t. * mach/sys/reboot.h: Remove two casts of integer literals to the types they already have. * bits/in.h: Correct error in description of IP_MULTICAST_LOOP. * sysdeps/unix/sysv/linux/bits/in.h: Likewise. * sysdeps/unix/sysv/linux/netinet/if_ether.h: Change a comment from referring to 'unsigned char' to 'uint8_t' for consistency with the macro definition below. * gmon/sys/gmon.h, inet/netinet/igmp.h, inet/protocols/talkd.h * io/fts.h, resolv/arpa/nameser.h, resolv/resolv.h * sunrpc/rpc/rpc_des.h, sysdeps/generic/netinet/ip.h * sysdeps/gnu/netinet/tcp.h, sysdeps/gnu/netinet/udp.h * sysdeps/mach/hurd/net/if_ppp.h, sysdeps/unix/sysv/linux/net/if_ppp.h * sysdeps/unix/sysv/linux/sys/acct.h * include/arpa/nameser.h, include/resolv.h: Fix indentation disrupted by mechanical edits. * inet/protocols/talkd.h, resolv/arpa/nameser.h * sysdeps/generic/netinet/in_systm.h * sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h * sysdeps/gnu/netinet/udp.h * sysdeps/unix/sysv/linux/net/ethernet.h * sysdeps/unix/sysv/linux/net/if_arp.h * sysdeps/unix/sysv/linux/net/if_ppp.h * sysdeps/unix/sysv/linux/net/if_shaper.h * sysdeps/unix/sysv/linux/netinet/if_fddi.h * sysdeps/unix/sysv/linux/netinet/if_tr.h * sysdeps/unix/sysv/linux/netipx/ipx.h * sysdeps/unix/sysv/linux/sys/acct.h Include stdint.h for uintNN_t definitions. Don't include sys/cdefs.h, features.h, or asm/types.h directly.
2016-08-03Update and install proc_service.h [BZ #20311]Tom Tromey2-6/+15
This adds an include guard and __BEGIN/__END_DECLS to proc_service.h, removes some extraneous "const"s, and then arranges to install the header. The idea here is to make it more convenient to implement the proc_service.h API.
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers48-48/+48
2015-10-20Convert 113 more function definitions to prototype style (files with ↵Joseph Myers5-15/+5
assertions). This mostly automatically-generated patch converts 113 function definitions in glibc from old-style K&R to prototype-style. Following my other recent such patches, this one deals with the case of function definitions in files that either contain assertions or where grep suggested they might contain assertions - and thus where it isn't possible to use a simple object code comparison as a sanity check on the correctness of the patch, because line numbers are changed. A few such automatically-generated changes needed to be supplemented by manual changes for the result to compile. openat64 had a prototype declaration with "..." but an old-style definition in sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the generated prototype in the definition (I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing such cases in GCC; the old state was undefined behavior not requiring a diagnostic, but one seems a good idea). In addition, as Florian has noted regparm attribute mismatches between declaration and definition are only diagnosed for prototype definitions, and five functions needed internal_function added to their definitions (in the case of __pthread_mutex_cond_lock, via the macro definition of __pthread_mutex_lock) to compile on i386. After this patch is in, remaining old-style definitions are probably most readily fixed manually before we can turn on -Wold-style-definition for all builds. Tested for x86_64 and x86 (testsuite). * crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style function definition. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * debug/backtracesyms.c (__backtrace_symbols): Likewise. * elf/dl-minimal.c (_itoa): Likewise. * hurd/hurdmalloc.c (malloc): Likewise. (free): Likewise. (realloc): Likewise. * inet/inet6_option.c (inet6_option_space): Likewise. (inet6_option_init): Likewise. (inet6_option_append): Likewise. (inet6_option_alloc): Likewise. (inet6_option_next): Likewise. (inet6_option_find): Likewise. * io/ftw.c (FTW_NAME): Likewise. (NFTW_NAME): Likewise. (NFTW_NEW_NAME): Likewise. (NFTW_OLD_NAME): Likewise. * libio/iofwide.c (_IO_fwide): Likewise. * libio/strops.c (_IO_str_init_static_internal): Likewise. (_IO_str_init_static): Likewise. (_IO_str_init_readonly): Likewise. (_IO_str_overflow): Likewise. (_IO_str_underflow): Likewise. (_IO_str_count): Likewise. (_IO_str_seekoff): Likewise. (_IO_str_pbackfail): Likewise. (_IO_str_finish): Likewise. * libio/wstrops.c (_IO_wstr_init_static): Likewise. (_IO_wstr_overflow): Likewise. (_IO_wstr_underflow): Likewise. (_IO_wstr_count): Likewise. (_IO_wstr_seekoff): Likewise. (_IO_wstr_pbackfail): Likewise. (_IO_wstr_finish): Likewise. * locale/programs/localedef.c (normalize_codeset): Likewise. * locale/programs/locarchive.c (add_locale_to_archive): Likewise. (add_locales_to_archive): Likewise. (delete_locales_from_archive): Likewise. * malloc/malloc.c (__libc_mallinfo): Likewise. * math/gen-auto-libm-tests.c (init_fp_formats): Likewise. * misc/tsearch.c (__tfind): Likewise. * nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise. * nptl/pthread_attr_getdetachstate.c (__pthread_attr_getdetachstate): Likewise. * nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize): Likewise. * nptl/pthread_attr_getinheritsched.c (__pthread_attr_getinheritsched): Likewise. * nptl/pthread_attr_getschedparam.c (__pthread_attr_getschedparam): Likewise. * nptl/pthread_attr_getschedpolicy.c (__pthread_attr_getschedpolicy): Likewise. * nptl/pthread_attr_getscope.c (__pthread_attr_getscope): Likewise. * nptl/pthread_attr_getstack.c (__pthread_attr_getstack): Likewise. * nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr): Likewise. * nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize): Likewise. * nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise. (__pthread_attr_init_2_0): Likewise. * nptl/pthread_attr_setdetachstate.c (__pthread_attr_setdetachstate): Likewise. * nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize): Likewise. * nptl/pthread_attr_setinheritsched.c (__pthread_attr_setinheritsched): Likewise. * nptl/pthread_attr_setschedparam.c (__pthread_attr_setschedparam): Likewise. * nptl/pthread_attr_setschedpolicy.c (__pthread_attr_setschedpolicy): Likewise. * nptl/pthread_attr_setscope.c (__pthread_attr_setscope): Likewise. * nptl/pthread_attr_setstack.c (__pthread_attr_setstack): Likewise. * nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr): Likewise. * nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize): Likewise. * nptl/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * nptl/pthread_create.c (__find_in_stack_list): Likewise. * nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise. * nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to use internal_function. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to prototype-style function definition. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise. (__pthread_mutex_cond_lock_adjust): Likewise. Use internal_function. * nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock): Convert to prototype-style function definition. * nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt): Likewise. (__pthread_mutex_unlock): Likewise. * nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise. * nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise. * nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise. * nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise. * nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise. * nss/makedb.c (process_input): Likewise. * posix/fnmatch.c (__strchrnul): Likewise. (__wcschrnul): Likewise. (fnmatch): Likewise. * posix/fnmatch_loop.c (FCT): Likewise. * posix/glob.c (globfree): Likewise. (__glob_pattern_type): Likewise. (__glob_pattern_p): Likewise. * posix/regcomp.c (re_compile_pattern): Likewise. (re_set_syntax): Likewise. (re_compile_fastmap): Likewise. (regcomp): Likewise. (regerror): Likewise. (regfree): Likewise. * posix/regexec.c (regexec): Likewise. (re_match): Likewise. (re_search): Likewise. (re_match_2): Likewise. (re_search_2): Likewise. (re_search_stub): Likewise. Use internal_function (re_copy_regs): Likewise. (re_set_registers): Convert to prototype-style function definition. (prune_impossible_nodes): Likewise. Use internal_function. * resolv/inet_net_pton.c (inet_net_pton): Convert to prototype-style function definition. (inet_net_pton_ipv4): Likewise. * stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise. * sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise. * sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise. * sysdeps/pthread/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise. Make variadic. * time/strptime_l.c (localtime_r): Convert to prototype-style function definition. * wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise. * wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise. * wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise. * wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
2015-03-17Fix DTV race, assert, DTV_SURPLUS Static TLS limit, and nptl_db garbageAlexandre Oliva7-12/+226
for ChangeLog [BZ #17090] [BZ #17620] [BZ #17621] [BZ #17628] * NEWS: Update. * elf/dl-tls.c (_dl_update_slotinfo): Clean up outdated DTV entries with Static TLS too. Skip entries past the end of the allocated DTV, from Alan Modra. (tls_get_addr_tail): Update to glibc_likely/unlikely. Move Static TLS DTV entry set up from... (_dl_allocate_tls_init): ... here (fix modid assertion), ... * elf/dl-reloc.c (_dl_nothread_init_static_tls): ... here... * nptl/allocatestack.c (init_one_static_tls): ... and here... * elf/dlopen.c (dl_open_worker): Drop l_tls_modid upper bound for Static TLS. * elf/tlsdeschtab.h (map_generation): Return size_t. Check that the slot we find is associated with the given map before using its generation count. * nptl_db/db_info.c: Include ldsodefs.h. (rtld_global, dtv_slotinfo_list, dtv_slotinfo): New typedefs. * nptl_db/structs.def (DB_RTLD_VARIABLE): New macro. (DB_MAIN_VARIABLE, DB_RTLD_GLOBAL_FIELD): Likewise. (link_map::l_tls_offset): New struct field. (dtv_t::counter): Likewise. (rtld_global): New struct. (_rtld_global): New rtld variable. (dl_tls_dtv_slotinfo_list): New rtld global field. (dtv_slotinfo_list): New struct. (dtv_slotinfo): Likewise. * nptl_db/td_symbol_list.c: Drop gnu/lib-names.h include. (td_lookup): Rename to... (td_mod_lookup): ... this. Use new mod parameter instead of LIBPTHREAD_SO. * nptl_db/td_thr_tlsbase.c: Include link.h. (dtv_slotinfo_list, dtv_slotinfo): New functions. (td_thr_tlsbase): Check DTV generation. Compute Static TLS addresses even if the DTV is out of date or missing them. * nptl_db/fetch-value.c (_td_locate_field): Do not refuse to index zero-length arrays. * nptl_db/thread_dbP.h: Include gnu/lib-names.h. (td_lookup): Make it a macro implemented in terms of... (td_mod_lookup): ... this declaration. * nptl_db/db-symbols.awk (DB_RTLD_VARIABLE): Override. (DB_MAIN_VARIABLE): Likewise.
2015-03-11powerpc: Remove HAVE_ASM_GLOBAL_DOT_NAME defineAdhemerval Zanella2-13/+1
With AIX port deprecated there is no need to check/define HAVE_ASM_GLOBAL_DOT_NAME anymore since the current minimum binutils supported (2.22) does not emit global symbol with dot. This patch removes all the HAVE_ASM_GLOBAL_DOT_NAME definition and checks for powerpc64 port.
2015-01-08Add stub sys/procfs.h fileRoland McGrath1-1/+1
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers48-48/+48
2014-11-24Remove IS_IN_libpthreadSiddhesh Poyarekar1-1/+1
Replace with IS_IN (libpthread). Generated code unchanged on x86_64. * nptl/lowlevellock.c: Use IS_IN instead of IS_IN_libpthread. * nptl/pthreadP.h: Likewise. * nptl_db/structs.def: Likewise. * sysdeps/arm/sysdep.h: Likewise. * sysdeps/nptl/bits/libc-lock.h: Likewise. * sysdeps/nptl/bits/libc-lockP.h: Likewise. * sysdeps/sparc/sparc32/lowlevellock.c: Likewise. * sysdeps/unix/alpha/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/not-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/cancellation.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise.
2014-09-12Remove configuration name patterns from shlib-versions.Joseph Myers1-1/+1
This patch removes the first column (patterns matching configuration names) from shlib-versions, leaving shlib-versions entry selection based purely on sysdeps directories. An implication of this removal is that the default for any non-Linux ports using NPTL will be the same SONAMEs for NPTL libraries as for Linux (as those defaults, previously limited to .*-.*-linux.*, are left in nptl/shlib-versions and nptl_db/shlib-versions). Special host_os handling in configure.ac that was purely for shlib-versions is removed. (The host_os setting is still used for libc-abis - see <https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding that - but no entries there are affected by this change.) Tested on x86_64 and x86 that the installed shared libraries are unchanged by this patch. * scripts/soversions.awk: Do not handle configuration names. * Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu, vendor and os variables to soversions.awk. * configure.ac: Do not modify gnu-* host_os. * configure: Regenerated * shlib-versions: Remove first column with configuration names. * nptl/shlib-versions: Likewise. * nptl_db/shlib-versions: Likewise. * sysdeps/hppa/shlib-versions: Likewise. * sysdeps/m68k/shlib-versions: Likewise. * sysdeps/mach/hurd/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise. libidn/ChangeLog: * shlib-versions: Remove first column with configuration names.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers1-1/+2
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-03Retire the separate ChangeLog files in nptl/ and nptl_db/ subdirs.Roland McGrath1-0/+5
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers2-0/+6
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.