| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
|
|
This patch completes the headers cleanup consequent on removal of
_BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations):
* #endif conditionals that referred to BSD or SVID are updated.
* Redundant __USE_* tests in cases involving __USE_MISC are removed.
This includes cases such as __USE_MISC || __USE_ISOC99, where
__USE_MISC is redundant (because __USE_MISC is only ever defined in
the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99
is also defined; the same applies to the non-XSI-extended POSIX
versions), and cases involving __USE_GNU, where __USE_GNU is
redundant (because if __USE_GNU is defined, so are the other __USE_*
macros). There may well be other cases of __USE_FOO || __USE_BAR
tests that could be simplified because one macro implies the other;
this patch only addresses cases involving __USE_MISC.
Tested x86_64.
* bits/fcntl.h [__USE_MISC]: Remove redundant conditionals.
* bits/sigaction.h [__USE_MISC]: Likewise.
* bits/waitstatus.h: Update #endif comments.
* ctype/ctype.h: Likewise.
* dirent/dirent.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
* grp/grp.h: Update #endif comments.
[__USE_GNU]: Remove redundant conditionals.
[__USE_MISC]: Likewise.
* inet/netinet/in.h [__USE_GNU]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/bits/stdio-ldbl.h [__USE_MISC]: Likewise.
* libio/bits/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* libio/bits/stdio2.h [__USE_MISC]: Likewise.
* libio/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* math/bits/math-finite.h [__USE_MISC]: Likewise.
* math/bits/mathcalls.h [__USE_MISC]: Likewise.
* math/math.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* misc/sys/uio.h: Update #endif comments.
* posix/bits/unistd.h [__USE_MISC]: Remove redundant conditionals.
* posix/glob.h [__USE_MISC]: Likewise.
* posix/sys/types.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/sys/wait.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/unistd.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* pwd/pwd.h [__USE_GNU]: Likewise.
[__USE_MISC]: Likewise.
* resolv/netdb.h [__USE_GNU]: Likewise.
* signal/signal.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* stdlib/stdlib.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
[__USE_GNU]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h [__USE_MISC]:
Likewise.
* sysdeps/mach/hurd/bits/fcntl.h [__USE_MISC]: Likewise.
* sysdeps/mach/hurd/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h: Update #endif
comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/unix/sysv/linux/bits/in.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/sigaction.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/x86/bits/string.h: Update #endif comments.
* sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC]: Remove redundant
conditionals.
* time/sys/time.h: Update #endif comments.
* time/time.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
|
|
This patch moves tests of clog10 to auto-libm-test-in. Note that this
means gen-auto-libm-tests will now depend on the recent MPC 1.0.2
release which added a fix for a bug that made gen-auto-libm-tests hang
for clog10. (It still can't conveniently be used for cacos cacosh
casin casinh catan catanh csin csinh because of extreme slowness of
those functions for special cases in MPC; at least some slow cases of
csin / csinh are fixed in MPC trunk, but not in a release.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of clog10.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of fma to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Because fma can have exact zero results depending on the rounding
mode, results of fma cannot always be determined from a single value
computed in higher precision with a sticky bit. Thus, this patch adds
support for recomputing results with the original MPFR/MPC function in
the case where an exact zero is involved. (This also affects some
results for cpow; when we start testing cpow in all rounding modes, I
think it will be most appropriate to make those tests use
IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs
of zero results, or special caes in general, for cpow, and I think
signs of zero for cpow are beyond the scope of glibc's accuracy
goals.)
Simply treating the existing test inputs for fma like those for other
functions (i.e., as representing the given value rounded up or down to
any of the supported floating-point formats) increases the size of
auto-libm-test-out by about 16MB (i.e., about half the file is fma
test data). While rounded versions of tests are perfectly reasonable
test inputs for fma, in this case having them seems excessive, so this
patch allows functions to specify in gen-auto-libm-tests that the
given test inputs are only to be interpreted exactly, not as
corresponding to values rounded up and down. This reduces the size of
the generated test data for fma to a more reasonable 2MB.
A consequence of this patch is that fma is now tested for correct
presence or absence of "inexact" exceptions, where previously this
wasn't tested because I didn't want to try to add that test coverage
manually to all the existing tests. As far as I know, the existing
fma implementations are already correct in this regard.
This patch provides the first cases where the gen-auto-libm-tests
support for distinguishing before-rounding/after-rounding underflow
actually produces separate entries in auto-libm-test-out (for
functions without exactly determined results, the affected cases are
all considered underflow-optional, so this only affects functions like
fma with exactly determined results). I didn't see any signs of
problems with this logic in the output.
Tested x86_64 and x86.
* math/auto-libm-test-in: Add tests of fma.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f.
(fma_towardzero_test_data): Likewise.
(fma_downward_test_data): Likewise.
(fma_upward_test_data): Likewise.
* math/gen-auto-libm-tests.c (rounding_mode_desc): Add field
mpc_mode.
(rounding_modes): Add values for new field.
(func_calc_method): Add value mpfr_fff_f.
(func_calc_desc): Add mpfr_fff_f union field.
(test_function): Add field exact_args.
(FUNC): Add macro argument EXACT_ARGS.
(FUNC_mpfr_f_f): Update call to FUNC.
(FUNC_mpfr_f_f): Likewise.
(FUNC_mpfr_ff_f): Likewise.
(FUNC_mpfr_if_f): Likewise.
(FUNC_mpc_c_f): Likewise.
(FUNC_mpc_c_c): Likewise.
(test_functions): Add fma. Update calls to FUNC.
(handle_input_arg): Add argument exact_args.
(add_test): Update call to handle_input_arg.
(calc_generic_results): Add argument mode. Handle mpfr_fff_f.
(output_for_one_input_case): Update call to calc_generic_results.
Recalculate exact zero results in each rounding mode.
|
|
gen-auto-libm-tests has a bug in the logic for setting a sticky bit
based on the ternary value from MPFR: it is correct for positive
results, but for negative results mpz_setbit acts as if a two's
complement representation is used, whereas the low bit needs setting
based on the sign-magnitude representation GMP actually uses. (This
showed up in converting fma tests to use auto-libm-test-in /
gen-auto-libm-tests.)
This patch fixes the problem by negating the mpz_t value to set its
low bit. There are lots of changes to auto-libm-test-out (mainly 1ulp
fixes to ldbl-128 expected results), but only a few ulps updates are
needed on x86 / x86_64. In one case, a corrected expectation showed
up a spurious underflow exception where the correct result is slightly
outside the underflowing range.
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c (adjust_real): Ensure integers are
non-negative before setting low bit.
* math/auto-libm-test-in: Mark one asin test possibly having
spurious underflow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch cleans up following the obsoletion of _BSD_SOURCE and
_SVID_SOURCE by combining __USE_BSD and __USE_SVID into __USE_MISC.
The only non-mechanical part of this patch is the changes to
features.h; everything else is simple substitution of __USE_MISC for
the old macros. Thus, this patch leaves obviously redundant
conditionals such as "defined __USE_MISC || defined __USE_MISC", and
does not update #endif comments where they referred to BSD or SVID in
words instead of the literal macro name. This is intended to
facilitate patch review by separating the less mechanical changes from
these purely mechanical changes into a separate patch. (I do intend
to integrate all the changes from
<https://sourceware.org/ml/libc-alpha/2013-12/msg00226.html>, which I
believe includes all the trailing comment updates, in subsequent
patches.)
Tested x86_64.
* include/features.h (__USE_BSD): Remove macro definitions.
(__USE_SVID): Likewise.
(_BSD_SOURCE): Likewise.
(_SVID_SOURCE): Likewise.
[!defined _BSD_SOURCE && !defined _SVID_SOURCE]: Remove condition
from definition of _DEFAULT_SOURCE.
[_BSD_SOURCE || _SVID_SOURCE]: Change condition to
[_DEFAULT_SOURCE].
* bits/fcntl.h [__USE_BSD]: Change condition to [__USE_MISC].
* bits/mman.h [__USE_BSD]: Likewise.
* bits/termios.h [__USE_BSD]: Likewise.
* bits/waitstatus.h [__USE_BSD]: Likewise.
* ctype/ctype.h [__USE_SVID]: Likewise.
* dirent/dirent.h [__USE_BSD]: Likewise.
* grp/grp.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* inet/netinet/igmp.h [__USE_BSD]: Likewise.
* io/fcntl.h [__USE_BSD]: Likewise.
* io/ftw.h [__USE_BSD]: Likewise.
* io/sys/stat.h [__USE_BSD]: Likewise.
* libio/bits/stdio-ldbl.h [__USE_BSD]: Likewise.
* libio/bits/stdio2.h [__USE_BSD]: Likewise.
* libio/stdio.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* math/math.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* misc/bits/syslog-ldbl.h [__USE_BSD]: Likewise.
* misc/bits/syslog.h [__USE_BSD]: Likewise.
* misc/search.h [__USE_SVID]: Likewise.
* misc/sys/mman.h [__USE_BSD]: Likewise.
* misc/sys/syslog.h [__USE_BSD]: Likewise.
* misc/sys/uio.h [__USE_BSD]: Likewise.
* posix/bits/unistd.h [__USE_BSD]: Likewise.
* posix/glob.h [__USE_BSD]: Likewise.
* posix/regex.h [__USE_BSD]: Likewise.
* posix/sys/types.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* posix/sys/utsname.h [__USE_SVID]: Likewise.
* posix/sys/wait.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* posix/unistd.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* pwd/pwd.h [__USE_SVID]: Likewise.
* resolv/netdb.h [__USE_BSD]: Likewise.
* setjmp/setjmp.h [__USE_BSD]: Likewise.
* signal/signal.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* socket/sys/socket.h [__USE_BSD]: Likewise.
* stdlib/fmtmsg.h [__USE_SVID]: Likewise.
* stdlib/stdlib.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* string/bits/string2.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* string/bits/string3.h [__USE_BSD]: Likewise.
* string/endian.h [__USE_BSD]: Likewise.
* string/string.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* string/strings.h [__USE_BSD]: Likewise.
* sysdeps/generic/netinet/ip.h [__USE_BSD]: Likewise.
* sysdeps/gnu/netinet/ip_icmp.h [__USE_BSD]: Likewise.
* sysdeps/mach/hurd/bits/fcntl.h [__USE_BSD]: Likewise.
* sysdeps/mach/hurd/bits/stat.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/bits/sys_errlist.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/netinet/if_ether.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/netinet/if_fddi.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/netinet/if_tr.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/x86/bits/string.h [__USE_BSD]: Likewise.
* sysvipc/sys/ipc.h [__USE_SVID]: Likewise.
* termios/termios.h [__USE_BSD]: Likewise.
* time/sys/time.h [__USE_BSD]: Likewise.
* time/time.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_BSD]: Change
condition to [__USE_MISC].
|
|
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from
the documented user API, making them into aliases for _DEFAULT_SOURCE
with a #warning given, but keeping most of the features.h logic using
those macros and all the exising __USE_* conditionals, on the basis
that all the consequent cleanups will go in followup patches.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros.
[_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define
_DEFAULT_SOURCE.
* manual/creature.texi (_BSD_SOURCE): Remove documentation.
(_SVID_SOURCE): Likewise.
(_DEFAULT_SOURCE): Update description of default features.
(Feature Test Macros): Don't mention _SVID_SOURCE in conjunction
with _GNU_SOURCE.
* manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE.
(S_ISVTX): Likewise.
* manual/math.texi (Mathematical Constants): Likewise.
* manual/signal.texi (Interrupted Primitives): Likewise.
* manual/startup.texi (putenv): Do not refer to _SVID_SOURCE.
* math/test-matherr.c (_SVID_SOURCE): Do not define.
* sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]:
Don't refer to _SVID_SOURCE in warning text.
|
|
Extend the range of numbers handled via unsafe mode.
Add expl testcase and regenerate ULPs for s390.
|
|
|
|
|
|
ARM has an override of the test math/test-fpucw.c, to disable (for
soft-float testing) definitions of hard-float macros in fpu_control.h
that the header normally defines not only when building for
hard-float, but also when building for soft-float with _LIBC defined
so that libc code can dynamically test whether VFP hardware is
present. (_LIBC is defined when building tests, although ideally it
wouldn't be.)
The override doesn't work for the derived tests test-fpucw-*.c because
they use #include "" instead of <> to include test-fpucw.c, so always
get the math/ version instead of the ARM sysdeps override. This patch
changes them to use <> so the sysdeps override is effective.
(test-fpucw-ieee-static.c doesn't need a change because it includes
test-fpucw-ieee.c, which isn't itself being overridden, which in turn
includes test-fpucw.c with a #include changed by this patch.)
Tested for ARM (big-endian soft-float, non-VFP hardware).
* math/test-fpucw-ieee.c: Use <> in #include of test-fpucw.c.
* math/test-fpucw-static.c: Likewise.
|
|
This patch marks more libm tests as expected to fail for ldbl-128ibm
in non-default rounding modes. Given this, my expm1l fix
<https://sourceware.org/ml/libc-alpha/2014-01/msg00135.html> and my
libgcc fix <http://gcc.gnu.org/ml/gcc-patches/2014-01/msg00157.html>
for spurious overflows, the remaining failures in test-ldouble.out
(for powerpc32 hard float) are small ulps, spurious underflow and
inexact exceptions (the former probably arising from libgcc bugs
though I haven't checked each case; the latter are barely meaningful
for this format anyway when basic arithmetic isn't correctly rounding,
though most of them are probably GCC bug 59412 which doesn't actually
involve long double), missing underflow exceptions from clog, ctan and
ctanh (probably one of the known bugs for another function), and logb
in round-downward mode (bug 887, though it's really a GCC bug that
we're not currently working around).
Tested for powerpc32 hard float.
* math/auto-libm-test-in: Mark various tests with
xfail-rounding:ldbl-128ibm.
* math/auto-libm-test-out: Regenerated.
|
|
This patch marks various libm tests with xfail-rounding:ldbl-128ibm,
where the failures appear to relate to GCC bug 59666 (bad libgcc
handling of directed rounding), so as to allow clean libm-test-ulps
regeneration without needing to edit out large ulps for various
functions manually.
Note that this only deals with the cases problematic for ulps
regeneration. There are plenty of test failures left that do not
affect ulps regeneration - results that are infinities or NaNs but
should be finite, or vice versa, and missing and spurious exceptions -
which should also be resolved during the release testing period.
Tested for powerpc32 (hard float).
* math/auto-libm-test-in: Mark various tests with
xfail-rounding:ldbl-128ibm.
* math/auto-libm-test-out: Regenerated.
|
|
|
|
16356).
This patch fixes bug 16356, bad results from x86 / x86_64 expl /
exp10l in directed rounding modes, the most serious of the bugs shown
up by my patch expanding libm test coverage. When I fixed bug 16293,
I thought it was only necessary to set round-to-nearest when using
frndint in expm1 functions, because in other cases the cancellation
error from having the resulting fractional part close to 1 or -1 would
not be significant. However, in expl and exp10l, the way the final
fractional part gets computed (something more complicated than a
simple subtraction, because more precision is needed than you'd get
that way) can result in a value outside the range [-1, 1] when the
argument to frndint was very close to an integer and was rounded the
"wrong" way because of the rounding mode - and the f2xm1 instruction
has undefined results if its argument is outside [-1, 1], so resulting
in the large errors seen. So this patch removes the USE_AS_EXPM1L
conditionals on the round-to-nearest settings, so all of expl, expm1l
and exp10l now get round-to-nearest used for frndint (meaning the
final fractional part can at most be slightly above 0.5 in
magnitude). Associated tests of exp and exp10 are added and testing
of exp10 in directed rounding modes enabled.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL): Also set
round-to-nearest for [!USE_AS_EXPM1L].
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL): Likewise.
* math/auto-libm-test-in: Do not expect cosh tests to fail. Add
more tests of exp and exp10. Expect some exp10 tests to miss
exceptions or fail in directed rounding modes.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (exp10_tonearest_test_data): New array.
(exp10_test_tonearest): New function.
(exp10_towardzero_test_data): New array.
(exp10_test_towardzero): New function.
(exp10_downward_test_data): New array.
(exp10_test_downward): New function.
(exp10_upward_test_data): New array.
(exp10_test_upward): New function.
(main): Call the new functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
Various libm functions have inadequate test coverage in libm-test.inc
/ auto-libm-test-in - failing to cover all the usual special cases
(infinities, NaNs, zero, large and small finite values, subnormals) as
well as a reasonable range of ordinary inputs and, where appropriate,
inputs close to the thresholds for underflow and overflow.
This patch improves test coverage for real functions [a-c]* (with the
expectation of adding more coverage for other functions later).
Tested x86_64 and x86 and ulps updated accordingly (and eight glibc
bugs and one C11 DR filed for issues found in the process).
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cbrt, cos and cosh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (acosh_test_data): Add more tests.
(atanh_test_data): Likewise.
(ceil_test_data): Likewise.
(copysign_test_data): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of cpow to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of cpow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cpow_test_data): Use AUTO_TESTS_cc_c.
* * math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_cc_c.
(func_calc_desc): Add mpc_cc_c union field.
(test_functions): Add cpow.
(special_fill_2pi): New function.
(special_real_inputs): Add 2pi.
(calc_generic_results): Handle mpc_cc_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and
ctanh to auto-libm-test-in, adding the required support to
gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now
(although the relevant table entries are put in gen-auto-libm-tests
for it to know how to handle them): clog10 because of a known MPC bug
causing it to hang for at least some pure imaginary inputs (fixed in
SVN, but I'd rather not rely on unreleased versions of MPFR or MPC
even if relying on very recent releases); the inverse trig and
hyperbolic functions because of known slowness in special cases; and
csin / csinh because of observed slowness that I need to investigate
and report to the MPC maintainers. Slowness can be bypassed by moving
to incremental generation (only for new / changed tests) rather than
regenerating the whole of auto-libm-test-out every time, but that
needs implementing. (This patch takes the time for running
gen-auto-libm-tests from about one second to seven, on my system,
which I think is reasonable. The slow functions would make it take
several minutes at least, which seems unreasonable.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog,
csqrt, ctan and ctanh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (TEST_COND_x86_64): New macro.
(TEST_COND_x86): Likewise.
(ccos_test_data): Use AUTO_TESTS_c_c.
(ccosh_test_data): Likewise.
(cexp_test_data): Likewise.
(clog_test_data): Likewise.
(csqrt_test_data): Likewise.
(ctan_test_data): Likewise.
(ctan_tonearest_test_data): Likewise.
(ctan_towardzero_test_data): Likewise.
(ctan_downward_test_data): Likewise.
(ctan_upward_test_data): Likewise.
(ctanh_test_data): Likewise.
(ctanh_tonearest_test_data): Likewise.
(ctanh_towardzero_test_data): Likewise.
(ctanh_downward_test_data): Likewise.
(ctanh_upward_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_c_c.
(func_calc_desc): Add mpc_c_c union field.
(FUNC_mpc_c_c): New macro.
(test_functions): Add cacos, cacosh, casin, casinh, catan, catanh,
ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and
ctanh.
(special_fill_min_subnorm_p120): New function.
(special_real_inputs): Add min_subnorm_p120.
(calc_generic_results): Handle mpc_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of cabs and carg to auto-libm-test-in, adding
the required support to gen-auto-libm-tests.
Tested x86_64 and x86; no ulps updates needed.
* math/auto-libm-test-in: Add tests of cabs and carg.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cabs_test_data): Use AUTO_TESTS_c_f.
(carg_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_c_f.
(func_calc_desc): Add mpc_c_f union field.
(test_functions): Add cabs and carg.
(calc_generic_results): Handle mpc_c_f.
|
|
This patch moves tests of sincos to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Tested x86_64 and x86 and ulps updated accordingly.
(auto-libm-test-out diffs omitted below.)
* math/auto-libm-test-in: Add tests of sincos.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (sincos_test_data): Use AUTO_TESTS_fFF_11.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpfr_f_11.
(func_calc_desc): Add mpfr_f_11 union field.
(test_functions): Add sincos.
(calc_generic_results): Handle mpfr_f_11.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
math/gen-libm-test.pl has code to beautify names of various constants,
transforming the source form in libm-test.inc into the version
appearing in test names in libm-test-ulps files.
This has become decreasingly relevant over time for the M_* constants,
first as I changed the test names so only the arguments and not the
expected results appeared in them, then as tests have moved to
auto-libm-test-* so that automatically generated hex float constants
get used instead of M_* in test inputs.
This patch removes the beautification for all M_* constants. Tested
x86_64 and x86 and ulps updated accordingly. Even the one case where
this affected the name in the ulps files will disappear once complex
function tests are moved to auto-libm-test-*.
* math/gen-libm-test.pl (%beautify): Remove M_* constants.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
Bug 16293 is inaccuracy of x86/x86_64 versions of expm1, near 0 in
directed rounding modes, that arises from frndint rounding the
exponent to 1 or -1 instead of 0, resulting in large cancellation
error. This inaccuracy in turn affects other functions such as sinh
that use expm1. This patch fixes the problem by setting
round-to-nearest mode temporarily around the affected calls to
frndint. I don't think this is needed for other uses of frndint, such
as in exp itself, as only for expm1 is the cancellation error
significant.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Set
round-to-nearest mode when using frndint.
* sysdeps/i386/fpu/s_expm1.S (__expm1): Likewise.
* sysdeps/i386/fpu/s_expm1f.S (__expm1f): Likewise.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of expm1. Do not expect
sinh test to fail.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (TEST_COND_x86_64): Remove macro.
(TEST_COND_x86): Likewise.
(expm1_tonearest_test_data): New array.
(expm1_test_tonearest): New function.
(expm1_towardzero_test_data): New array.
(expm1_test_towardzero): New function.
(expm1_downward_test_data): New array.
(expm1_test_downward): New function.
(expm1_upward_test_data): New array.
(expm1_test_upward): New function.
(main): Run the new test functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of jn and yn to auto-libm-test-in, adding the
required support for gen-auto-libm-tests (and adding a missing
assertion there and fixing logic that was broken for functions with
integer arguments).
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of jn and yn.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (jn_test_data): Use AUTO_TESTS_if_f.
(yn_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpfr_if_f.
(func_calc_desc): Add mpfr_if_f union field.
(FUNC_mpfr_if_f): New macro.
(test_functions): Add jn and yn.
(calc_generic_results): Assert type of second input for
mpfr_ff_f. Handle mpfr_if_f.
(output_for_one_input_case): Disable all checking for arguments
fitting floating-point types in case of an integer argument.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
As needed on x86.
* math/auto-libm-test-in: Mark some hypot tests no-test-inline.
* math/auto-libm-test-out: Regenerated.
|
|
This patch fixes bug 16338, ldbl-128 logl not handling subnormals
(with consequent inaccuracy for lgammal as well). The fix is simply
to use __frexpl when determining the exponent, as done already in
log2l and log10l. Given the lack of testing of small arguments to any
of the log* functions, appropriate tests are added for all of them.
Tested x86_64 and x86 and ulps updated accordingly, and spot tests
also run for mips64 to confirm the ldbl-128 fix.
Note that while this fixes lgammal inaccuracy for small positive
arguments, I suspect that there will still be problems with spurious
underflows in that case.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Use __frexpl
to determine exponent and adjust argument to have exponent of -1.
* math/auto-libm-test-in: Add more tests of log, log10, log1p and
log2.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
|
|
|
|
|
|
|
|
|
|
|
|
auto-libm-test-in.
|
|
|
|
|
|
|
|
|
|
auto-libm-test-in.
|
|
auto-libm-test-in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Not all architectures define this value, and if they don't,
just let the test run the same as test-fpucw, with __fpu_control
set to _FPU_DEFAULT explicitly.
|
|
|
|
lround / llround tests.
|
|
|
|
|
|
http://sourceware.org/ml/libc-alpha/2013-08/msg00084.html
Another batch of ieee854 macros and union replacement. These four
files also have bugs fixed with this patch. The fact that the two
doubles in an IBM long double may have different signs means that
negation and absolute value operations can't just twiddle one sign bit
as you can with ieee864 style extended double. fmodl, remainderl,
erfl and erfcl all had errors of this type. erfl also returned +1 for
large magnitude negative input where it should return -1. The hypotl
error is innocuous since the value adjusted twice is only used as a
flag. The e_hypotl.c tests for large "a" and small "b" are mutually
exclusive because we've already exited when x/y > 2**120. That allows
some further small simplifications.
[BZ #15734], [BZ #15735]
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Rewrite
all uses of ieee875 long double macros and unions. Simplify test
for 0.0L. Correct |x|<|y| and |x|=|y| test. Use
ldbl_extract_mantissa value for ix,iy exponents. Properly
normalize after ldbl_extract_mantissa, and don't add hidden bit
already handled. Don't treat low word of ieee854 mantissa like
low word of IBM long double and mask off bit when testing for
zero.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Rewrite
all uses of ieee875 long double macros and unions. Simplify tests
for 0.0L and inf. Correct double adjustment of k. Delete dead code
adjusting ha,hb. Simplify code setting kld. Delete two600 and
two1022, instead use their values. Recognise that tests for large
"a" and small "b" are mutually exclusive. Rename vars. Comment.
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl):
Rewrite all uses of ieee875 long double macros and unions. Simplify
test for 0.0L and nan. Correct negation.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c (__erfl): Rewrite all uses of
ieee875 long double macros and unions. Correct output for large
magnitude x. Correct absolute value calculation.
(__erfcl): Likewise.
* math/libm-test.inc: Add tests for errors discovered in IBM long
double versions of fmodl, remainderl, erfl and erfcl.
|
|
http://sourceware.org/ml/libc-alpha/2013-08/msg00081.html
This is the first of a series of patches to ban ieee854_long_double
and the ieee854_long_double macros when using IBM long double. union
ieee854_long_double just isn't correct for IBM long double, especially
when little-endian, and pretending it is OK has allowed a number of
bugs to remain undetected in sysdeps/ieee754/ldbl-128ibm/.
This changes the few places in generic code that use it.
* stdio-common/printf_size.c (__printf_size): Don't use
union ieee854_long_double in fpnum union.
* stdio-common/printf_fphex.c (__printf_fphex): Likewise. Use
signbit macro to retrieve sign from long double.
* stdio-common/printf_fp.c (___printf_fp): Use signbit macro to
retrieve sign from long double.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: Adjust for fpnum change.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Likewise.
* sysdeps/ieee754/ldbl-96/printf_fphex.c: Likewise.
* sysdeps/x86_64/fpu/printf_fphex.c: Likewise.
* math/test-misc.c (main): Don't use union ieee854_long_double.
ports/
* sysdeps/ia64/fpu/printf_fphex.c: Adjust for fpnum change.
|
