| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.
That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT. This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).
Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias). gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files). In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.
gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls). Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations. The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.
For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add". A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).
* math/Makefile (test-type-pairs): New variable.
(test-type-pairs-f64xf128-yes): Likewise.
(tests): Add test-narrow-macros.
(libm-test-funcs-narrow): New variable.
(libm-test-c-narrow): Likewise.
(generated): Add $(libm-test-c-narrow).
(libm-tests-base-narrow): New variable.
(libm-tests-narrow): Likewise.
(libm-tests): Add $(libm-tests-narrow).
(libm-tests-for-type): Handle $(libm-tests-narrow).
(libm-test-c-narrow-obj): New variable.
($(libm-test-c-narrow-obj)): New rule.
($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
$(o-iterator) to set dependencies and CFLAGS.
* math/gen-auto-libm-tests.c: Document use for narrowing
functions.
(output_for_one_input_case): Take argument NARROW.
(generate_output): Likewise. Update call to
output_for_one_input_case.
(main): Take --narrow option. Update call to generate_output.
* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
(apply_lit): Update call to _apply_lit.
(apply_arglit): New function.
(parse_args): Handle "a" arguments.
(parse_auto_input): Handle format names using ":".
* math/README.libm-test: Document "a" parameter type.
* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
(ARG_TYPE_TRUE_MIN): Likewise.
(ARG_TYPE_MAX): Likwise.
(ARG_MIN_EXP): Likewise.
(ARG_MAX_EXP): Likewise.
(ARG_MANT_DIG): Likewise.
(TEST_COND_arg_ibm128): Likewise.
(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
(TEST_COND_arg_fmt): New macro.
(init_max_error): Update prototype.
* math/libm-test-support.c (test_ibm128): New variable.
(init_max_error): Take argument testing_ibm128 and set test_ibm128
instead of using [TEST_COND_ibm128] conditional.
(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
[TEST_NARROW] (TEST_MSG): New definition.
(arg_plus_zero): New macro.
(arg_minus_zero): Likewise.
(arg_plus_infty): Likewise.
(arg_minus_infty): Likewise.
(arg_qnan_value_pl): Likewise.
(arg_qnan_value): Likewise.
(arg_snan_value_pl): Likewise.
(arg_snan_value): Likewise.
(arg_max_value): Likewise.
(arg_min_value): Likewise.
(arg_min_subnorm_value): Likewise.
[ARG_FLOAT] (struct test_aa_f_data): New struct type.
(RUN_TEST_LOOP_aa_f): New macro.
(TEST_SUFF): New macro.
(TEST_SUFF_STR): Likewise.
[!TEST_MATHVEC] (VEC_SUFF): Don't define.
(TEST_COND_any_ibm128): New macro.
(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
this_func. Update call to init_max_error.
* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
* math/test-math-scalar.h (TEST_NARROW): Likewise.
* math/test-math-vector.h (TEST_NARROW): Likewise.
* math/test-arg-double.h: New file.
* math/test-arg-float128.h: Likewise.
* math/test-arg-float32x.h: Likewise.
* math/test-arg-float64.h: Likewise.
* math/test-arg-float64x.h: Likewise.
* math/test-arg-ldouble.h: Likewise.
* math/test-math-narrow.h: Likewise.
* math/test-narrow-macros.c: Likewise.
* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
test-narrow-macros-ldbl-64.
(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
|
|
TS 18661-1 defines libm functions that carry out an operation (+ - * /
sqrt fma) on their arguments and return a result rounded to a
(usually) narrower type, as if the original result were computed to
infinite precision and then rounded directly to the result type
without any intermediate rounding to the argument type. For example,
fadd, faddl and daddl for addition. These are the last remaining TS
18661-1 functions left to be added to glibc. TS 18661-3 extends this
to corresponding functions for _FloatN and _FloatNx types.
As functions parametrized by two rather than one varying
floating-point types, these functions require infrastructure in glibc
that was not required for previous libm functions. This patch
provides such infrastructure - excluding test support, and actual
function implementations, which will be in subsequent patches.
Declaring the functions uses a header bits/mathcalls-narrow.h, which
is included many times, for each relevant pair of types. This will
end up containing macro calls of the form
__MATHCALL_NARROW (__MATHCALL_NAME (add), __MATHCALL_REDIR_NAME (add), 2);
for each family of narrowing functions. (The structure of this macro
call, with the calls to __MATHCALL_NAME and __MATHCALL_REDIR_NAME
there rather than in the definition of __MATHCALL_NARROW, arises from
the names such as "add" *not* themselves being reserved identifiers -
meaning it's necessary to avoid any indirection that would result in a
user-defined "add" macro being expanded.) Whereas for existing
functions declaring long double functions is disabled if _LIBC in the
case where they alias double functions, to facilitate defining the
long double functions as aliases of the double ones, there is no such
logic for the narrowing functions in this patch. Rather, the files
defining such functions are expected to use #define to hide the
original declarations of the alias names, to avoid errors about
defining aliases with incompatible types.
math/Makefile support is added for building the functions (listed in
libm-narrow-fns, currently empty) for all relevant pairs of types. An
internal header math-narrow.h is added for macros shared between
multiple function implementations - currently a ROUND_TO_ODD macro to
facilitate writing functions using the round-to-odd implementation
approach, and alias macros to create all the required function
aliases. libc_feholdexcept_setroundf128 and libc_feupdateenv_testf128
are added for use when required (only for x86_64). float128_private.h
support is added for ldbl-128 narrowing functions to be used for
_Float128.
Certain things are specifically omitted from this patch and the
immediate followups. tgmath.h support is deferred; there remain
unresolved questions about how the type-generic macros for these
functions are supposed to work, especially in the case of arguments of
integer type. The math.h / bits/mathcalls-narrow.h logic, and the
logic for determining what functions / aliases to define, will need
some adjustments to support the sqrt and fma functions, where
e.g. f32xsqrtf64 can just be an alias for sqrt rather than a separate
function. TS 18661-1 defines FP_FAST_* macros but no support is
included for defining them (they won't in general be true without
architecture-specific optimized function versions).
For each of the function groups (add sub mul div sqrt fma) there are
always six functions present (e.g. fadd, faddl, daddl, f32addf64,
f32addf32x, f32xaddf64). When _Float64x and _Float128 are supported,
there are seven more (e.g. f32addf64x, f32addf128, f64addf64x,
f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128). In addition, in
the ldbl-opt case there are function names such as __nldbl_daddl (an
alias for f32xaddf64, which is not a reserved name in TS 18661-1, only
in TS 18661-3), for calls to daddl to be mapped to in the
-mlong-double-64 case. (Calls to faddl just get mapped to fadd, and
for sqrt and fma there won't be __nldbl_* functions because dsqrtl and
dfmal can just be mapped to sqrt and fma with -mlong-double-64.)
While there are six or thirteen functions present in each group (plus
__nldbl_* names only as an ABI, not an API), not all are distinct;
they fall in various groups of aliases. There are two distinct
versions built if long double has the same format as double; four if
they have distinct formats but there is no _Float64x or _Float128
support; five if long double has binary128 format; seven when
_Float128 is distinct from long double.
Architecture-specific optimized versions are possible, but not
included in my patches. For example, IA64 generally supports
narrowing the result of most floating-point instructions; Power ISA
2.07 (POWER8) supports double values as arguments to float
instructions, with the results narrowed as expected; Power ISA 3
(POWER9) supports round-to-odd for float128 instructions, so meaning
that approach can be used without needing to set and restore the
rounding mode and test "inexact". I intend to leave any such
optimized versions to the architecture maintainers. Generally in such
cases it would also make sense for calls to these functions to be
expanded inline (given -fno-math-errno); I put a suggestion for TS
18661-1 built-in functions at <https://gcc.gnu.org/wiki/SummerOfCode>.
Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with further patches).
* math/bits/mathcalls-narrow.h: New file.
* include/bits/mathcalls-narrow.h: Likewise.
* math/math-narrow.h: Likewise.
* math/math.h (__MATHCALL_NARROW_ARGS_1): New macro.
(__MATHCALL_NARROW_ARGS_2): Likewise.
(__MATHCALL_NARROW_ARGS_3): Likewise.
(__MATHCALL_NARROW_NORMAL): Likewise.
(__MATHCALL_NARROW_REDIR): Likewise.
(__MATHCALL_NARROW): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)]: Repeatedly include
<bits/mathcalls-narrow.h> with _Mret_, _Marg_ and __MATHCALL_NAME
defined.
[__GLIBC_USE (IEC_60559_TYPES_EXT)]: Likewise.
* math/Makefile (headers): Add bits/mathcalls-narrow.h.
(libm-narrow-fns): New variable.
(libm-narrow-types-basic): Likewise.
(libm-narrow-types-ldouble-yes): Likewise.
(libm-narrow-types-float128-yes): Likewise.
(libm-narrow-types-float128-alias-yes): Likewise.
(libm-narrow-types): Likewise.
(libm-routines): Add narrowing functions.
* sysdeps/i386/fpu/fenv_private.h [__x86_64__]
(libc_feholdexcept_setroundf128): New macro.
[__x86_64__] (libc_feupdateenv_testf128): Likewise.
* sysdeps/ieee754/float128/float128_private.h: Include
<math/math-narrow.h>.
[libc_feholdexcept_setroundf128] (libc_feholdexcept_setroundl):
Undefine and redefine.
[libc_feupdateenv_testf128] (libc_feupdateenv_testl): Likewise.
(libm_alias_float_ldouble): Undefine and redefine.
(libm_alias_double_ldouble): Likewise.
|
|
The math/Makefile variable libm-test-incs was formerly used, but no
longer is. This patch removes it.
Tested for x86_64.
* math/Makefile [$(PERL) != no] (libm-test-incs): Remove variable.
|
|
I found that "make regen-ulps" failed when building with unmodified
GNU make 4.1, and an objdir /some/where/math/ longer than about 37
characters, because the list of tests in the "for run in $^" loop
exceeded the Linux kernel's MAX_ARG_STRLEN limit (131072 bytes) on the
length of a single argument passed to a command.
Some GNU/Linux distributions have a patch to make to work around this
limit (see e.g. Debian bug 688601), but clearly this ought to work
without needing such a patch. This patch arranges for the shell loop
to be over the test names without a $(objdir) prefix, which reduces
the space used to less than half MAX_ARG_STRLEN.
(I think we ought to aim to get rid of bits/mathinline.h completely -
filing GCC bugs for any optimizations GCC can't currently do with
-ffast-math - which would mean we could halve the number of libm tests
run because separate inline function tests would no longer be needed.
However, with a long directory name even half the number of tests
could make this command exceed MAX_ARG_STRLEN without my patch.)
Tested regen-ulps on a system where it failed before this patch.
* math/Makefile (run-regen-ulps): Add $(objpfx) to test name here.
(regen-ulps): Use $(libm-tests) not $^ in shell loop.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
In C++ mode, __MATH_TG cannot be used for defining iseqsig, because
__MATH_TG relies on __builtin_types_compatible_p, which is a C-only
builtin. This is true when float128 is provided as an ABI-distinct type
from long double.
Moreover, the comparison macros from ISO C take two floating-point
arguments, which need not have the same type. Choosing what underlying
function to call requires evaluating the formats of the arguments, then
selecting which is wider. The macro __MATH_EVAL_FMT2 provides this
information, however, only the type of the macro expansion is relevant
(actually evaluating the expression would be incorrect).
This patch provides a C++ version of iseqsig, in which only the type of
__MATH_EVAL_FMT2 (__typeof or decltype) is used as a template parameter
for __iseqsig_type. This function calls the appropriate underlying
function.
Tested for powerpc64le and x86_64.
[BZ #22377]
* math/Makefile [C++] (tests): Add test for iseqsig.
* math/math.h [C++] (iseqsig): New implementation, which does
not rely on __MATH_TG/__builtin_types_compatible_p.
* math/test-math-iseqsig.cc: New file.
* sysdeps/powerpc/powerpc64le/Makefile
(CFLAGS-test-math-iseqsig.cc): New variable.
|
|
Revert:
2017-12-19 Joseph Myers <joseph@codesourcery.com>
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
2017-12-19 Patrick McGehearty <patrick.mcgehearty@oracle.com>
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
|
|
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
|
|
Replace = with += in CFLAGS-xxx.c and CPPFLAGS-xxx.c to allow Makefile
under sysdeps to define CFLAGS-xx.c and CPPFLAGS-xxx.c.
* argp/Makefile (CFLAGS-argp-help.c): Replace = with +=.
(CFLAGS-argp-parse.c): Likewise.
(CFLAGS-argp-fmtstream.c): Likewise.
* crypt/Makefile (CPPFLAGS-sha256-crypt.c): Likewise.
(CPPFLAGS-sha512-crypt.c): Likewise.
(CPPFLAGS-md5-crypt.c): Likewise.
* debug/Makefile (CFLAGS-stack_chk_fail.c): Likewise.
(CFLAGS-stack_chk_fail_local.c): Likewise.
(CFLAGS-backtrace.c): Likewise.
(CFLAGS-sprintf_chk.c): Likewise.
(CFLAGS-snprintf_chk.c): Likewise.
(CFLAGS-vsprintf_chk.c): Likewise.
(CFLAGS-vsnprintf_chk.c): Likewise.
(CFLAGS-asprintf_chk.c): Likewise.
(CFLAGS-vasprintf_chk.c): Likewise.
(CFLAGS-obprintf_chk.c): Likewise.
(CFLAGS-dprintf_chk.c): Likewise.
(CFLAGS-vdprintf_chk.c): Likewise.
(CFLAGS-printf_chk.c): Likewise.
(CFLAGS-fprintf_chk.c): Likewise.
(CFLAGS-vprintf_chk.c): Likewise.
(CFLAGS-vfprintf_chk.c): Likewise.
(CFLAGS-gets_chk.c): Likewise.
(CFLAGS-fgets_chk.c): Likewise.
(CFLAGS-fgets_u_chk.c): Likewise.
(CFLAGS-fread_chk.c): Likewise.
(CFLAGS-fread_u_chk.c): Likewise.
(CFLAGS-swprintf_chk.c): Likewise.
(CFLAGS-vswprintf_chk.c): Likewise.
(CFLAGS-wprintf_chk.c): Likewise.
(CFLAGS-fwprintf_chk.c): Likewise.
(CFLAGS-vwprintf_chk.c): Likewise.
(CFLAGS-vfwprintf_chk.c): Likewise.
(CFLAGS-fgetws_chk.c): Likewise.
(CFLAGS-fgetws_u_chk.c): Likewise.
(CFLAGS-read_chk.c): Likewise.
(CFLAGS-pread_chk.c): Likewise.
(CFLAGS-pread64_chk.c): Likewise.
(CFLAGS-recv_chk.c): Likewise.
(CFLAGS-recvfrom_chk.c): Likewise.
(CFLAGS-tst-longjmp_chk.c): Likewise.
(CPPFLAGS-tst-longjmp_chk.c): Likewise.
(CFLAGS-tst-longjmp_chk2.c): Likewise.
(CPPFLAGS-tst-longjmp_chk2.c): Likewise.
(CFLAGS-tst-longjmp_chk3.c): Likewise.
(CPPFLAGS-tst-longjmp_chk3.c): Likewise.
(CFLAGS-tst-chk1.c): Likewise.
(CFLAGS-tst-chk2.c): Likewise.
(CFLAGS-tst-chk3.c): Likewise.
(CFLAGS-tst-chk4.cc): Likewise.
(CFLAGS-tst-chk5.cc): Likewise.
(CFLAGS-tst-chk6.cc): Likewise.
(CFLAGS-tst-lfschk1.c): Likewise.
(CFLAGS-tst-lfschk2.c): Likewise.
(CFLAGS-tst-lfschk3.c): Likewise.
(CFLAGS-tst-lfschk4.cc): Likewise.
(CFLAGS-tst-lfschk5.cc): Likewise.
(CFLAGS-tst-lfschk6.cc): Likewise.
(CFLAGS-tst-ssp-1.c): Likewise.
* dirent/Makefile (CFLAGS-scandir.c): Likewise.
(CFLAGS-scandir64.c): Likewise.
(CFLAGS-scandir-tail.c): Likewise.
(CFLAGS-scandir64-tail.c): Likewise.
* elf/Makefile (CPPFLAGS-dl-tunables.c): Likewise.
(CFLAGS-dl-tunables.c): Likewise.
(CFLAGS-dl-runtime.c): Likewise.
(CFLAGS-dl-lookup.c): Likewise.
(CFLAGS-dl-iterate-phdr.c): Likewise.
(CFLAGS-vismain.c): Likewise.
(CFLAGS-tst-linkall-static.c): Likewise.
(CFLAGS-tst-linkall-static.c): Likewise.
(CPPFLAGS-dl-load.c): Likewise.
(CFLAGS-ldconfig.c): Likewise.
(CFLAGS-dl-cache.c): Likewise.
(CFLAGS-cache.c): Likewise.
(CFLAGS-rtld.c): Likewise.
(CFLAGS-multiload.c): Likewise.
(CFLAGS-filtmod1.c): Likewise.
(CFLAGS-tst-align.c): Likewise.
(CFLAGS-tst-align2.c): Likewise.
(CFLAGS-tst-alignmod.c): Likewise.
(CFLAGS-tst-alignmod2.c): Likewise.
(CPPFLAGS-tst-execstack.c): Likewise.
(CFLAGS-tst-ptrguard1-static.c): Likewise.
(CFLAGS-tst-latepthreadmod.c): Likewise.
* grp/Makefile (CFLAGS-getgrgid_r.c): Likewise.
(CFLAGS-getgrnam_r.c): Likewise.
(CFLAGS-getgrent_r.c): Likewise.
(CFLAGS-getgrent.c): Likewise.
(CFLAGS-fgetgrent.c): Likewise.
(CFLAGS-fgetgrent_r.c): Likewise.
(CFLAGS-putgrent.c): Likewise.
(CFLAGS-initgroups.c): Likewise.
(CFLAGS-getgrgid.c): Likewise.
* gshadow/Makefile (CFLAGS-getsgent_r.c): Likewise.
(CFLAGS-getsgent.c): Likewise.
(CFLAGS-fgetsgent.c): Likewise.
(CFLAGS-fgetsgent_r.c): Likewise.
(CFLAGS-putsgent.c): Likewise.
(CFLAGS-getsgnam.c): Likewise.
(CFLAGS-getsgnam_r.c): Likewise.
* iconv/Makefile (CFLAGS-iconv_prog.c): Likewise.
(CFLAGS-iconv_charmap.c): Likewise.
(CFLAGS-dummy-repertoire.c): Likewise.
(CFLAGS-charmap.c): Likewise.
(CFLAGS-linereader.c): Likewise.
(CFLAGS-simple-hash.c): Likewise.
(CFLAGS-gconv_conf.c): Likewise.
(CFLAGS-iconvconfig.c): Likewise.
* inet/Makefile (CFLAGS-gethstbyad_r.c): Likewise.
(CFLAGS-gethstbyad.c): Likewise.
(CFLAGS-gethstbynm_r.c): Likewise.
(CFLAGS-gethstbynm.c): Likewise.
(CFLAGS-gethstbynm2_r.c): Likewise.
(CFLAGS-gethstbynm2.c): Likewise.
(CFLAGS-gethstent_r.c): Likewise.
(CFLAGS-gethstent.c): Likewise.
(CFLAGS-rcmd.c): Likewise.
(CFLAGS-getnetbynm_r.c): Likewise.
(CFLAGS-getnetbynm.c): Likewise.
(CFLAGS-getnetbyad_r.c): Likewise.
(CFLAGS-getnetbyad.c): Likewise.
(CFLAGS-getnetent_r.c): Likewise.
(CFLAGS-getnetent.c): Likewise.
(CFLAGS-getaliasent_r.c): Likewise.
(CFLAGS-getaliasent.c): Likewise.
(CFLAGS-getrpcent_r.c): Likewise.
(CFLAGS-getrpcent.c): Likewise.
(CFLAGS-getservent_r.c): Likewise.
(CFLAGS-getservent.c): Likewise.
(CFLAGS-getprtent_r.c): Likewise.
(CFLAGS-getprtent.c): Likewise.
(CFLAGS-either_ntoh.c): Likewise.
(CFLAGS-either_hton.c): Likewise.
(CFLAGS-getnetgrent.c): Likewise.
(CFLAGS-getnetgrent_r.c): Likewise.
(CFLAGS-tst-checks-posix.c): Likewise.
(CFLAGS-tst-sockaddr.c): Likewise.
* intl/Makefile (CFLAGS-tst-gettext.c): Likewise.
(CFLAGS-tst-translit.c): Likewise.
(CFLAGS-tst-gettext2.c): Likewise.
(CFLAGS-tst-codeset.c): Likewise.
(CFLAGS-tst-gettext3.c): Likewise.
(CFLAGS-tst-gettext4.c): Likewise.
(CFLAGS-tst-gettext5.c): Likewise.
(CFLAGS-tst-gettext6.c): Likewise.
* io/Makefile (CFLAGS-open.c): Likewise.
(CFLAGS-open64.c): Likewise.
(CFLAGS-creat.c): Likewise.
(CFLAGS-creat64.c): Likewise.
(CFLAGS-fcntl.c): Likewise.
(CFLAGS-poll.c): Likewise.
(CFLAGS-ppoll.c): Likewise.
(CFLAGS-lockf.c): Likewise.
(CFLAGS-statfs.c): Likewise.
(CFLAGS-fstatfs.c): Likewise.
(CFLAGS-statvfs.c): Likewise.
(CFLAGS-fstatvfs.c): Likewise.
(CFLAGS-fts.c): Likewise.
(CFLAGS-fts64.c): Likewise.
(CFLAGS-ftw.c): Likewise.
(CFLAGS-ftw64.c): Likewise.
(CFLAGS-lockf.c): Likewise.
(CFLAGS-posix_fallocate.c): Likewise.
(CFLAGS-posix_fallocate64.c): Likewise.
(CFLAGS-fallocate.c): Likewise.
(CFLAGS-fallocate64.c): Likewise.
(CFLAGS-read.c): Likewise.
(CFLAGS-write.c): Likewise.
(CFLAGS-test-stat.c): Likewise.
(CFLAGS-test-lfs.c): Likewise.
* libio/Makefile (CFLAGS-fileops.c): Likewise.
(CFLAGS-fputc.c): Likewise.
(CFLAGS-fputwc.c): Likewise.
(CFLAGS-freopen64.c): Likewise.
(CFLAGS-freopen.c): Likewise.
(CFLAGS-fseek.c): Likewise.
(CFLAGS-fseeko64.c): Likewise.
(CFLAGS-fseeko.c): Likewise.
(CFLAGS-ftello64.c): Likewise.
(CFLAGS-ftello.c): Likewise.
(CFLAGS-fwide.c): Likewise.
(CFLAGS-genops.c): Likewise.
(CFLAGS-getc.c): Likewise.
(CFLAGS-getchar.c): Likewise.
(CFLAGS-getwc.c): Likewise.
(CFLAGS-getwchar.c): Likewise.
(CFLAGS-iofclose.c): Likewise.
(CFLAGS-iofflush.c): Likewise.
(CFLAGS-iofgetpos64.c): Likewise.
(CFLAGS-iofgetpos.c): Likewise.
(CFLAGS-iofgets.c): Likewise.
(CFLAGS-iofgetws.c): Likewise.
(CFLAGS-iofputs.c): Likewise.
(CFLAGS-iofputws.c): Likewise.
(CFLAGS-iofread.c): Likewise.
(CFLAGS-iofsetpos64.c): Likewise.
(CFLAGS-iofsetpos.c): Likewise.
(CFLAGS-ioftell.c): Likewise.
(CFLAGS-iofwrite.c): Likewise.
(CFLAGS-iogetdelim.c): Likewise.
(CFLAGS-iogetline.c): Likewise.
(CFLAGS-iogets.c): Likewise.
(CFLAGS-iogetwline.c): Likewise.
(CFLAGS-ioputs.c): Likewise.
(CFLAGS-ioseekoff.c): Likewise.
(CFLAGS-ioseekpos.c): Likewise.
(CFLAGS-iosetbuffer.c): Likewise.
(CFLAGS-iosetvbuf.c): Likewise.
(CFLAGS-ioungetc.c): Likewise.
(CFLAGS-ioungetwc.c): Likewise.
(CFLAGS-oldfileops.c): Likewise.
(CFLAGS-oldiofclose.c): Likewise.
(CFLAGS-oldiofgetpos64.c): Likewise.
(CFLAGS-oldiofgetpos.c): Likewise.
(CFLAGS-oldiofsetpos64.c): Likewise.
(CFLAGS-oldiofsetpos.c): Likewise.
(CFLAGS-peekc.c): Likewise.
(CFLAGS-putc.c): Likewise.
(CFLAGS-putchar.c): Likewise.
(CFLAGS-putwc.c): Likewise.
(CFLAGS-putwchar.c): Likewise.
(CFLAGS-rewind.c): Likewise.
(CFLAGS-wfileops.c): Likewise.
(CFLAGS-wgenops.c): Likewise.
(CFLAGS-oldiofopen.c): Likewise.
(CFLAGS-iofopen.c): Likewise.
(CFLAGS-iofopen64.c): Likewise.
(CFLAGS-oldtmpfile.c): Likewise.
(CFLAGS-tst_putwc.c): Likewise.
* locale/Makefile (CFLAGS-md5.c): Likewise.
(CFLAGS-charmap.c): Likewise.
(CFLAGS-locfile.c): Likewise.
(CFLAGS-charmap-dir.c): Likewise.
* login/Makefile (CFLAGS-grantpt.c): Likewise.
(CFLAGS-getpt.c): Likewise.
(CFLAGS-pt_chown.c): Likewise.
* malloc/Makefile (CFLAGS-mcheck-init.c): Likewise.
(CFLAGS-obstack.c): Likewise.
* math/Makefile (CFLAGS-test-tgmath3.c): Likewise.
(CFLAGS-test-double-vlen4-wrappers.c): Likewise.
(CFLAGS-test-double-vlen8-wrappers.c): Likewise.
(CFLAGS-test-float-vlen8-wrappers.c): Likewise.
(CFLAGS-test-float-vlen16-wrappers.c): Likewise.
(CFLAGS-test-tgmath.c): Likewise.
(CFLAGS-test-tgmath2.c): Likewise.
(CFLAGS-test-tgmath-ret.c): Likewise.
(CFLAGS-test-powl.c): Likewise.
(CFLAGS-test-snan.c): Likewise.
(CFLAGS-test-signgam-finite.c): Likewise.
(CFLAGS-test-signgam-finite-c99.c): Likewise.
(CFLAGS-test-signgam-finite-c11.c): Likewise.
(CFLAGS-test-signgam-uchar.c): Likewise.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
(CFLAGS-test-math-cxx11.cc): Likewise.
(CFLAGS-test-math-isinff.cc): Likewise.
(CFLAGS-test-math-iszero.cc): Likewise.
(CFLAGS-test-math-issignaling.cc): Likewise.
(CFLAGS-test-math-iscanonical.cc): Likewise.
(CFLAGS-test-iszero-excess-precision.c): Likewise.
(CFLAGS-test-iseqsig-excess-precision.c): Likewise.
(CFLAGS-test-flt-eval-method.c): Likewise.
(CFLAGS-test-fe-snans-always-signal.c): Likewise.
(CFLAGS-test-finite-macros.c): Likewise.
* misc/Makefile (CFLAGS-select.c): Likewise.
(CFLAGS-tsearch.c): Likewise.
(CFLAGS-lsearch.c): Likewise.
(CFLAGS-pselect.c): Likewise.
(CFLAGS-readv.c): Likewise.
(CFLAGS-writev.c): Likewise.
(CFLAGS-preadv.c): Likewise.
(CFLAGS-preadv64.c): Likewise.
(CFLAGS-pwritev.c): Likewise.
(CFLAGS-pwritev64.c): Likewise.
(CFLAGS-preadv2.c): Likewise.
(CFLAGS-preadv64v2.c): Likewise.
(CFLAGS-pwritev2.c): Likewise.
(CFLAGS-pwritev64v2.c): Likewise.
(CFLAGS-usleep.c): Likewise.
(CFLAGS-syslog.c): Likewise.
(CFLAGS-error.c): Likewise.
(CFLAGS-getpass.c): Likewise.
(CFLAGS-mkstemp.c): Likewise.
(CFLAGS-mkstemp64.c): Likewise.
(CFLAGS-getsysstats.c): Likewise.
(CFLAGS-getusershell.c): Likewise.
(CFLAGS-err.c): Likewise.
(CFLAGS-tst-tsearch.c): Likewise.
(CFLAGS-msync.c): Likewise.
(CFLAGS-fdatasync.c): Likewise.
(CFLAGS-fsync.c): Likewise.
* nptl/Makefile (CFLAGS-nptl-init.c): Likewise.
(CFLAGS-unwind.c): Likewise.
(CFLAGS-unwind-forcedunwind.c): Likewise.
(CFLAGS-pthread_cancel.c): Likewise.
(CFLAGS-pthread_setcancelstate.c): Likewise.
(CFLAGS-pthread_setcanceltype.c): Likewise.
(CFLAGS-cancellation.c): Likewise.
(CFLAGS-libc-cancellation.c): Likewise.
(CFLAGS-pthread_exit.c): Likewise.
(CFLAGS-forward.c): Likewise.
(CFLAGS-pthread_testcancel.c): Likewise.
(CFLAGS-pthread_join.c): Likewise.
(CFLAGS-pthread_timedjoin.c): Likewise.
(CFLAGS-pthread_once.c): Likewise.
(CFLAGS-pthread_cond_wait.c): Likewise.
(CFLAGS-sem_wait.c): Likewise.
(CFLAGS-sem_timedwait.c): Likewise.
(CFLAGS-fcntl.c): Likewise.
(CFLAGS-lockf.c): Likewise.
(CFLAGS-pread.c): Likewise.
(CFLAGS-pread64.c): Likewise.
(CFLAGS-pwrite.c): Likewise.
(CFLAGS-pwrite64.c): Likewise.
(CFLAGS-wait.c): Likewise.
(CFLAGS-waitpid.c): Likewise.
(CFLAGS-sigwait.c): Likewise.
(CFLAGS-msgrcv.c): Likewise.
(CFLAGS-msgsnd.c): Likewise.
(CFLAGS-tcdrain.c): Likewise.
(CFLAGS-open.c): Likewise.
(CFLAGS-open64.c): Likewise.
(CFLAGS-pause.c): Likewise.
(CFLAGS-recv.c): Likewise.
(CFLAGS-send.c): Likewise.
(CFLAGS-accept.c): Likewise.
(CFLAGS-sendto.c): Likewise.
(CFLAGS-connect.c): Likewise.
(CFLAGS-recvfrom.c): Likewise.
(CFLAGS-recvmsg.c): Likewise.
(CFLAGS-sendmsg.c): Likewise.
(CFLAGS-close.c): Likewise.
(CFLAGS-read.c): Likewise.
(CFLAGS-write.c): Likewise.
(CFLAGS-nanosleep.c): Likewise.
(CFLAGS-sigsuspend.c): Likewise.
(CFLAGS-msync.c): Likewise.
(CFLAGS-fdatasync.c): Likewise.
(CFLAGS-fsync.c): Likewise.
(CFLAGS-pt-system.c): Likewise.
(CFLAGS-tst-cleanup2.c): Likewise.
(CFLAGS-tst-cleanupx2.c): Likewise.
(CFLAGS-flockfile.c): Likewise.
(CFLAGS-ftrylockfile.c): Likewise.
(CFLAGS-funlockfile.c): Likewise.
(CFLAGS-tst-initializers1.c): Likewise.
(CFLAGS-tst-initializers1-c89.c): Likewise.
(CFLAGS-tst-initializers1-c99.c): Likewise.
(CFLAGS-tst-initializers1-c11.c): Likewise.
(CFLAGS-tst-initializers1-gnu89.c): Likewise.
(CFLAGS-tst-initializers1-gnu99.c): Likewise.
(CFLAGS-tst-initializers1-gnu11.c): Likewise.
* nscd/Makefile (CFLAGS-nscd_getpw_r.c): Likewise.
(CFLAGS-nscd_getgr_r.c): Likewise.
(CFLAGS-nscd_gethst_r.c): Likewise.
(CFLAGS-nscd_getai.c): Likewise.
(CFLAGS-nscd_initgroups.c): Likewise.
* posix/Makefile (CFLAGS-getaddrinfo.c): Likewise.
(CFLAGS-pause.c): Likewise.
(CFLAGS-pread.c): Likewise.
(CFLAGS-pread64.c): Likewise.
(CFLAGS-pwrite.c): Likewise.
(CFLAGS-pwrite64.c): Likewise.
(CFLAGS-sleep.c): Likewise.
(CFLAGS-wait.c): Likewise.
(CFLAGS-waitid.c): Likewise.
(CFLAGS-waitpid.c): Likewise.
(CFLAGS-getopt.c): Likewise.
(CFLAGS-wordexp.c): Likewise.
(CFLAGS-sysconf.c): Likewise.
(CFLAGS-pathconf.c): Likewise.
(CFLAGS-fpathconf.c): Likewise.
(CFLAGS-spawn.c): Likewise.
(CFLAGS-spawnp.c): Likewise.
(CFLAGS-spawni.c): Likewise.
(CFLAGS-glob.c): Likewise.
(CFLAGS-glob64.c): Likewise.
(CFLAGS-getconf.c): Likewise.
(CFLAGS-nanosleep.c): Likewise.
* pwd/Makefile (CFLAGS-getpwent_r.c): Likewise.
(CFLAGS-getpwent.c): Likewise.
(CFLAGS-getpw.c): Likewise.
(CFLAGS-fgetpwent_r.c): Likewise.
* resolv/Makefile (CFLAGS-res_hconf.c): Likewise.
* rt/Makefile (CFLAGS-aio_suspend.c): Likewise.
(CFLAGS-mq_timedreceive.c): Likewise.
(CFLAGS-mq_timedsend.c): Likewise.
(CFLAGS-clock_nanosleep.c): Likewise.
(CFLAGS-librt-cancellation.c): Likewise.
* shadow/Makefile (CFLAGS-getspent_r.c): Likewise.
(CFLAGS-getspent.c): Likewise.
(CFLAGS-fgetspent.c): Likewise.
(CFLAGS-fgetspent_r.c): Likewise.
(CFLAGS-putspent.c): Likewise.
(CFLAGS-getspnam.c): Likewise.
(CFLAGS-getspnam_r.c): Likewise.
* signal/Makefile (CFLAGS-sigpause.c): Likewise.
(CFLAGS-sigsuspend.c): Likewise.
(CFLAGS-sigtimedwait.c): Likewise.
(CFLAGS-sigwait.c): Likewise.
(CFLAGS-sigwaitinfo.c): Likewise.
(CFLAGS-sigreturn.c): Likewise.
* stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise.
(CFLAGS-vfwprintf.c): Likewise.
(CFLAGS-tmpfile.c): Likewise.
(CFLAGS-tmpfile64.c): Likewise.
(CFLAGS-tempname.c): Likewise.
(CFLAGS-psignal.c): Likewise.
(CFLAGS-vprintf.c): Likewise.
(CFLAGS-cuserid.c): Likewise.
(CFLAGS-errlist.c): Likewise.
(CFLAGS-siglist.c): Likewise.
(CFLAGS-scanf15.c): Likewise.
(CFLAGS-scanf17.c): Likewise.
* stdlib/Makefile (CFLAGS-bsearch.c): Likewise.
(CFLAGS-msort.c): Likewise.
(CFLAGS-qsort.c): Likewise.
(CFLAGS-system.c): Likewise.
(CFLAGS-fmtmsg.c): Likewise.
(CFLAGS-strfmon.c): Likewise.
(CFLAGS-strfmon_l.c): Likewise.
(CFLAGS-strfromd.c): Likewise.
(CFLAGS-strfromf.c): Likewise.
(CFLAGS-strfroml.c): Likewise.
(CFLAGS-tst-bsearch.c): Likewise.
(CFLAGS-tst-qsort.c): Likewise.
(CFLAGS-tst-makecontext2.c): Likewise.
* sunrpc/Makefile (CFLAGS-xbootparam_prot.c): Likewise.
(CFLAGS-xnlm_prot.c): Likewise.
(CFLAGS-xrstat.c): Likewise.
(CFLAGS-xyppasswd.c): Likewise.
(CFLAGS-xklm_prot.c): Likewise.
(CFLAGS-xrex.c): Likewise.
(CFLAGS-xsm_inter.c): Likewise.
(CFLAGS-xmount.c): Likewise.
(CFLAGS-xrusers.c): Likewise.
(CFLAGS-xspray.c): Likewise.
(CFLAGS-xnfs_prot.c): Likewise.
(CFLAGS-xrquota.c): Likewise.
(CFLAGS-xkey_prot.c): Likewise.
(CFLAGS-auth_unix.c): Likewise.
(CFLAGS-key_call.c): Likewise.
(CFLAGS-pmap_rmt.c): Likewise.
(CFLAGS-clnt_perr.c): Likewise.
(CFLAGS-openchild.c): Likewise.
* sysvipc/Makefile (CFLAGS-msgrcv.c): Likewise.
(CFLAGS-msgsnd.c): Likewise.
* termios/Makefile (CFLAGS-tcdrain.c): Likewise.
* time/Makefile (CFLAGS-tzfile.c): Likewise.
(CFLAGS-tzset.c): Likewise.
(CFLAGS-getdate.c): Likewise.
(CFLAGS-test_time.c): Likewise.
(CPPFLAGS-tst-tzname.c): Likewise.
* timezone/Makefile (CFLAGS-zdump.c): Likewise.
(CFLAGS-zic.c): Likewise.
* wcsmbs/Makefile (CFLAGS-wcwidth.c): Likewise.
(CFLAGS-wcswidth.c): Likewise.
(CFLAGS-wcstol.c): Likewise.
(CFLAGS-wcstoul.c): Likewise.
(CFLAGS-wcstoll.c): Likewise.
(CFLAGS-wcstoull.c): Likewise.
(CFLAGS-wcstod.c): Likewise.
(CFLAGS-wcstold.c): Likewise.
(CFLAGS-wcstof128.c): Likewise.
(CFLAGS-wcstof.c): Likewise.
(CFLAGS-wcstol_l.c): Likewise.
(CFLAGS-wcstoul_l.c): Likewise.
(CFLAGS-wcstoll_l.c): Likewise.
(CFLAGS-wcstoull_l.c): Likewise.
(CFLAGS-wcstod_l.c): Likewise.
(CFLAGS-wcstold_l.c): Likewise.
(CFLAGS-wcstof128_l.c): Likewise.
(CFLAGS-wcstof_l.c): Likewise.
(CPPFLAGS-tst-wchar-h.c): Likewise.
(CPPFLAGS-wcstold_l.c): Likewise.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This patch concludes filling out TS 18661-3 support for different
types by adding *f32 function aliases of float functions to support
_Float32. As with _Float64 and _Float32x, this is supported for all
glibc configurations. As with the previous such patches there are
some x86 ulps updates because of inline functions present for float
but not for _Float32. The patch also has the usual
bits/floatn-common.h update, symbol versions, ABI baselines updates,
test enablement and documentation.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT32): Define to 1.
* manual/math.texi (Mathematics): Document support for _Float32.
* math/Makefile (test-types): Add float32.
* math/Versions (GLIBC_2.27): Add _Float32 functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
|
|
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
|
|
This patch adds support for testing _Float64x libm functions. A
configuration with such functions sets float64x-alias-fcts = yes in a
sysdeps Makeconfig file; until such settings are added, this test
support is inactive.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* math/test-float64x.h: New file.
* math/Makefile (type-float64x-yes): New variable.
(test-types): Add $(type-float64x-$(float64x-alias-fcts)).
|
|
math.h has a macro _Mlong_double_ for the type to use when declaring
long double functions, and similar macros for other types.
math/Makefile uses -D_Mlong_double_=double in the case of long double
having the same ABI as double.
This originates with:
Mon Jul 8 13:37:40 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu>
* math/math.h (_Mfloat_, _Mlong_double_): New macros, defined iff not
already defined to float, long double. Use those macros for _Mdouble_
defns when including mathcalls.h.
* math/Makefile [$(long-double-fcts) != yes] (CPPFLAGS): Append
-D_Mlong_double_=double.
However, math.h stopped declaring long double functions in the case of
long double having the same ABI as double (and thus probably stopped
actually needing the Makefile definition of _Mlong_double_) with:
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
* math/math.h: Unconditionally include bits/mathdef.h. Declare
long double functions only if __NO_LONG_DOUBLE_MATH is not
defined.
* sysdeps/generic/bits/mathdef.h: Define only if __USE_ISOC9X.
Define __NO_LONG_DOUBLE_MATH.
* sysdeps/m68k/fpu/bits/mathdef.h: Define only if __USE_ISOC9X.
* sysdeps/i386/fpu/bits/mathdef.h: Likewise.
The declarations were since restored for compiling user code, but
remain absent when _LIBC is defined, which is sufficient to avoid
problems declaring function aliases of incompatible types. Thus the
indirection through the _Mlong_double_ macro is not needed (probably
since that 1998 patch), and this patch removes _Mlong_double_ and
associated macros for other types, leaving only the macro _Mdouble_
which is actually used as the type for which a given inclusion of
<bits/mathcalls.h> should declared functions.
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by this patch.
* math/math.h [!_Mfloat_] (_Mfloat_): Do not define.
[!_Mlong_double_] (_Mlong_double_): Likewise.
[!_Mfloat16_] (_Mfloat16_): Likewise.
[!_Mfloat32_] (_Mfloat32_): Likewise.
[!_Mfloat64_] (_Mfloat64_): Likewise.
[!_Mfloat128_] (_Mfloat128_): Likewise.
[!_Mfloat32x_] (_Mfloat32x_): Likewise.
[!_Mfloat64x_] (_Mfloat64x_): Likewise.
[!_Mfloat128x_] (_Mfloat128x_): Likewise.
(_Mdouble_): Define without indirection through those macros.
* math/complex.h [!_Mfloat_] (_Mfloat_): Do not define.
[!_Mfloat128_] (_Mfloat128_): Likewise.
[_Mlong_double_] (_Mlong_double_): Likewise.
(_Mdouble_): Define without indirection through those macros.
* math/Makefile [$(long-double-fcts) != yes] (math-CPPFLAGS): Do
not add -D_Mlong_double_=double.
* include/math.h [_ISOMAC] (_Mlong_double_): Do not undefine.
* math/test-signgam-finite-c99.c (_Mlong_double_): Likewise.
|
|
The bits/floatn.h header currently only has defines relating to
_Float128. This patch adds defines relating to other _FloatN /
_FloatNx types.
The approach taken is to add defines for all _FloatN / _FloatNx types
known to GCC, and to put them in a common bits/floatn-common.h header
included at the end of all the individual bits/floatn.h headers. If
in future some defines become different for different glibc
configurations, they will move out into the separate bits/floatn.h
headers.
Some defines are expected always to be the same across glibc ports.
Corresponding defines are nevertheless put in this header. The intent
is that where there are conditionals (in headers or in non-installed
files) that can just repeat the same or nearly the same logic for each
floating-point type, they should do so, even if in fact the cases for
some types could be unconditionally present or absent because the same
conditionals are true or false for all glibc configurations. This
should make the glibc code with such conditionals easier to read,
because the reader can just see that the same conditionals are
repeated for each type, rather than seeing different conditionals for
different types and needing to reason, at each location with such
differences, why those differences are indeed correct there. (Cases
involving per-format rather than per-type logic are more likely still
to need differences in how they handle different types.)
Having such defines and conditionals also helps in incremental
preparation for adding _Float32 / _Float64 / _Float32x / _Float64x
function aliases. I intend subsequent patches to add such
conditionals corresponding to those already present for _Float128, as
well as making more architecture-specific function implementations use
common macros to define aliases in preparation for adding such _FloatN
/ _FloatNx aliases.
Tested for x86_64.
* bits/floatn-common.h: New file.
* math/Makefile (headers): Add bits/floatn-common.h.
* bits/floatn.h: Include <bits/floatn-common.h>.
* sysdeps/ia64/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h: Likewise.
* sysdeps/powerpc/bits/floatn.h: Likewise.
* sysdeps/x86/bits/floatn.h: Likewise.
|
|
This patch adds support for running libm tests for float128 in the
case where the float128 functions are aliases of long double
functions. In this case, the sysdeps Makeconfig file
(i.e. sysdeps/ieee754/ldbl-128/Makeconfig) will need to define
"float128-alias-fcts = yes" to enable the tests.
Tested for x86_64. Also tested with build-many-glibcs.py; installed
stripped shared libraries are unchanged by the patch. Also tested
together with changes to enable the float128 aliases.
* math/Makefile (test-types): Add
$(type-float128-$(float128-alias-fcts)).
* math/test-float128.h (TYPE_STR): Define conditional on
[FLT128_MANT_DIG == LDBL_MANT_DIG].
(ULP_IDX): Likewise.
(ULP_I_IDX): Likewise.
|
|
All interfaces in the glibc API ought to be covered by the testsuite,
even where they alias other interfaces. This patch arranges for libm
tests to be run for long double when it aliases double; previously
those tests were run only for the floating-point types with distinct
formats. The long double tests are made to use the double ulps values
in this case, as having a separate duplicate set of ulps for them
seems unnecessary; to accommodate that, the test-<type>.h headers now
specify the macro indexing into the ulps array explicitly instead of
having it computed from PREFIX.
Nothing special is done about vector function tests. None are
supported for any long double = double platforms, and supporting
vector functions for a type alias such as _Float32 would not simply
fall out of adding the scalar aliases for that type - it would require
vector function wrappers like those for *_finite (or, better, a new
GCC feature to allow specifying the asm name for vector functions
independently of that for scalar ones, as previously discussed), so it
seems reasonable to require the sysdeps makefile setting of
libmvec-tests to be updated if any such tests are to be run for type
aliases.
Tested for x86_64 and arm.
* math/Makefile (test-types-basic): New variable.
(test-types): Likewise.
(libm-test-support): Use $(test-types) instead of $(types).
(libm-tests-base-normal): Likewise.
(libm-tests-base-finite): Likewise.
(libm-tests-base-inline): Likewise.
(generated): Likewise.
($(objpfx)libm-test-support-$(t).c): Likewise.
(libm-tests-for-type iterator): Likewise.
(libm-test-support iterator): Likewise.
* math/libm-test-support.c (ulp_i_idx): Use ULP_I_IDX.
(ulp_idx): Use ULP_IDX.
* math/test-ldouble.h: Include <float.h>.
(TYPE_STR): Define conditional on [LDBL_MANT_DIG == DBL_MANT_DIG].
(ULP_IDX): New macro.
(ULP_I_IDX): Likewise.
* math/test-double.h (ULP_IDX): Likewise.
(ULP_I_IDX): Likewise.
* math/test-float.h (ULP_IDX): Likewise.
(ULP_I_IDX): Likewise.
* math/test-float128.h (ULP_IDX): Likewise.
(ULP_I_IDX): Likewise.
|
|
This patch ensures that the C99 and C11 features required by C++ are
defined according to the value of the __cplusplus macro, and not just
because G++ always defines _GNU_SOURCE. This will allow G++ to stop
defining _GNU_SOURCE some day, without causing the C99 and C11
interfaces to disappear for C++ programs.
[BZ #21326]
* include/features.h [__cplusplus >= 201103] (__USE_ISOC99): Define.
[__cplusplus >= 201703] (__USE_ISOCXX17, __USE_ISOC11): Define.
* math/Makefile (test-math-cxx11): New test.
* math/test-math-cxx11.cc: New file.
|
|
All representations of floating-point numbers in types with IEC 60559
binary exchange format are canonical. On the other hand, types with IEC
60559 extended formats, such as those implemented under ldbl-96 and
ldbl-128ibm, contain representations that are not canonical.
TS 18661-1 introduced the type-generic macro iscanonical, which returns
whether a floating-point value is canonical or not. In Glibc, this
type-generic macro is implemented using the macro __MATH_TG, which, when
support for float128 is enabled, relies on __builtin_types_compatible_p
to select between floating-point types. However, this use of
iscanonical breaks C++ applications, because the builtin is only
available in C mode.
This patch provides a C++ implementation of iscanonical that relies on
function overloading, rather than builtins, to select between
floating-point types.
Unlike the C++ implementations for iszero and issignaling, this
implementation ignores __NO_LONG_DOUBLE_MATH. The double type always
matches IEC 60559 double format, which is always canonical. Thus, when
double and long double are the same (__NO_LONG_DOUBLE_MATH), iscanonical
always returns 1 and is not implemented with __MATH_TG.
Tested for powerpc64, powerpc64le and x86_64.
[BZ #22235]
* math/math.h: Trivial fix for unbalanced parentheses in comment.
* math/Makefile [CXX] (tests): Add test-math-iscanonical.cc.
(CFLAGS-test-math-iscanonical.cc): New variable.
* math/test-math-iscanonical.cc: New file.
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h (iscanonical):
Provide a C++ implementation based on function overloading,
rather than using __MATH_TG, which uses C-only builtins.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h (iscanonical):
Likewise.
* sysdeps/powerpc/powerpc64le/Makefile
(CFLAGS-test-math-iscanonical.cc): New variable.
|
|
without wrapper on aarch64:
powf reciprocal-throughput: 4.2x faster
powf latency: 2.6x faster
old worst-case error: 1.11 ulp
new worst-case error: 0.82 ulp
aarch64 .text size: -780 bytes
aarch64 .rodata size: +144 bytes
powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms
that are used in exp2f and log2f, except that the log2f polynomial is
larger for extra precision and its output (and exp2f input) may be
scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction
step of exp2 (possible when efficient round and convert toint operation
is available).
The special case handling tries to minimize the checks in the hot path.
When the input of exp2_inline is checked, int arithmetics is used as
that was faster on the tested aarch64 cores.
* math/Makefile (type-float-routines): Add e_powf_log2_data.
* sysdeps/ieee754/flt-32/e_powf.c: New implementation.
* sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define.
(issignalingf_inline): Likewise.
(POWF_LOG2_TABLE_BITS): Likewise.
(POWF_LOG2_POLY_ORDER): Likewise.
(POWF_SCALE_BITS): Likewise.
(POWF_SCALE): Likewise.
* sysdeps/i386/fpu/e_powf_log2_data.c: New file.
* sysdeps/ia64/fpu/e_powf_log2_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file.
|
|
Similar to the new logf: double precision arithmetics and a small
lookup table is used. The argument reduction step is the same as in
the new logf.
without wrapper on aarch64:
log2f reciprocal-throughput: 2.3x faster
log2f latency: 2.1x faster
old worst case error: 1.72 ulp
new worst case error: 0.75 ulp
aarch64 .text size: -252 bytes
aarch64 .rodata size: +244 bytes
* math/Makefile (type-float-routines): Add e_log2f_data.
* sysdeps/ieee754/flt-32/e_log2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_log2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define.
(LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_log2f_data.c: New file.
* sysdeps/ia64/fpu/e_log2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file.
|
|
without wrapper on aarch64:
logf reciprocal-throughput: 2.2x faster
logf latency: 1.9x faster
old worst case error: 0.89 ulp
new worst case error: 0.82 ulp
aarch64 .text size: -356 bytes
aarch64 .rodata size: +240 bytes
Uses double precision arithmetics and a lookup table to allow smaller
polynomial and avoid the use of division.
Data is in a separate translation unit with fixed layout to prevent the
compiler generating suboptimal literal access.
Errors are handled inline according to POSIX rules, but this patch
keeps the wrapper with SVID compatible error handling.
Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode.
* math/Makefile (type-float-routines): Add e_logf_data.
* sysdeps/ieee754/flt-32/e_logf.c: New implementation.
* sysdeps/ieee754/flt-32/e_logf_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define.
(LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_logf_data.c: New file.
* sysdeps/ia64/fpu/e_logf_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file.
|
|
Based on new expf and exp2f code from
https://github.com/ARM-software/optimized-routines/
with wrapper on aarch64:
expf reciprocal-throughput: 2.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
expf reciprocal-throughput: 3.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
exp2f reciprocal-throughput: 2.8x faster
exp2f latency: 1.3x faster
libm.so size on aarch64:
.text size: -152 bytes
.rodata size: -1740 bytes
expf/exp2f worst case nearest rounding error: 0.502 ulp
worst case non-nearest rounding error: 1 ulp
Error checks are inline and errno setting is in separate tail called
functions, but the wrappers are kept in this patch to handle the
_LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls
and once for __expf_finite calls on targets where the new code is used.)
Double precision arithmetics is used which is expected to be faster on
most targets (including soft-float) than using single precision and it
is easier to get good precision result with it.
Const data is kept in a separate translation unit which complicates
maintenance a bit, but is expected to give good code for literal loads
on most targets and allows sharing data across expf, exp2f and powf.
(This data is disabled on i386, m68k and ia64 which have their own
expf, exp2f and powf code.)
Some details may need target specific tweaks:
- best convert and round to int operation in the arg reduction may be
different across targets.
- code was optimized on fma target, optimal polynomial eval may be
different without fma.
- gcc does not always generate good code for fp bit representation
access via unions or it may be inherently slow on some targets.
The libm-test-ulps will need adjustment because..
- The argument reduction ideally uses nearest rounded rint, but that is
not efficient on most targets, so the polynomial can get evaluated on a
wider interval in non-nearest rounding mode making 1 ulp errors common
in that case.
- The polynomial is evaluated such that it may have 1 ulp error on
negative tiny inputs with upward rounding.
* math/Makefile (type-float-routines): Add math_errf and e_exp2f_data.
* sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define.
(roundtoint, converttoint): Likewise.
* sysdeps/ieee754/flt-32/e_expf.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h: New file.
* sysdeps/ieee754/flt-32/math_errf.c: New file.
* sysdeps/ieee754/flt-32/t_exp2f.h: Remove.
* sysdeps/i386/fpu/e_exp2f_data.c: New file.
* sysdeps/i386/fpu/math_errf.c: New file.
* sysdeps/ia64/fpu/e_exp2f_data.c: New file.
* sysdeps/ia64/fpu/math_errf.c: New file.
* sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/math_errf.c: New file.
|
|
Similar to my patches for HUGE_VAL and INFINITY. this patch eliminates
the bits/nan.h headers. __builtin_nanf ("") is used to define NAN for
GCC 3.3 and later; the fallback is (0.0f / 0.0f), which is a constant
expression for a quiet NaN of type float, but raises a spurious
"invalid" exception outside static initializers, which seems the best
that can be done purely in standard C. Again, if anyone actually uses
a compiler with its own incompatible extension for producing a
constant quiet NaN, we can add compiler conditionals.
Tested for x86_64.
* math/math.h [__USE_ISOC99] (NAN): Define directly here. Do not
include <bits/nan.h>.
* math/Makefile (headers): Remove bits/nan.h.
* bits/nan.h: Remove.
* sysdeps/ieee754/bits/nan.h: Likewise.
* sysdeps/mips/bits/nan.h: Likewise.
|
|
Similar to my patch for HUGE_VAL, this patch eliminates the bits/inf.h
headers and just unconditionally uses the same definitions as the
sysdeps/ieee754 version did (__builtin_inff () for GCC >= 3.3,
otherwise HUGE_VALF), directly in math.h, so removing an unnecessary
level of indirection.
Tested for x86_64.
* math/math.h [__USE_ISOC99] (INFINITY): Define directly here. Do
not include <bits/inf.h>.
* math/Makefile (headers): Remove bits/inf.h.
* bits/inf.h: Remove.
* sysdeps/ieee754/bits/inf.h: Likewise.
|
|
There are various bits/huge_val*.h headers to define HUGE_VAL and
related macros. All of them use __builtin_huge_val etc. for GCC 3.3
and later. Then there are various fallbacks, such as using a large
hex float constant for GCC 2.96 and later, or using unions (with or
without compound literals) to construct the bytes of an infinity, with
this last being the reason for having architecture-specific files.
Supporting TS 18661-3 _FloatN / _FloatNx types that have the same
format as other supported types will mean adding more such macros;
needing to add more headers for them doesn't seem very desirable.
The fallbacks based on bytes of the representation of an infinity do
not meet the standard requirements for a constant expression. At
least one of them is also wrong: sysdeps/sh/bits/huge_val.h is
producing a mixed-endian representation which does not match what GCC
does.
This patch eliminates all those headers, defining the macros directly
in math.h. For GCC 3.3 and later, the built-in functions are used as
now. For other compilers, a large constant 1e10000 (with appropriate
suffix) is used. This is like the fallback for GCC 2.96 and later,
but without using hex floats (which have no apparent advantage here).
It is unambiguously valid standard C for all floating-point formats
with infinities, which covers all formats supported by glibc or likely
to be supported by glibc in future (C90 DR#025 said that if a
floating-point format represents infinities, all real values lie
within the range of representable values, so the constraints for
constant expressions are not violated), but may generate compiler
warnings and wouldn't handle the TS 18661-1 FENV_ROUND pragma
correctly. If someone is actually using a compiler with glibc that
does not claim to be GCC 3.3 or later, but which has a better way to
define the HUGE_VAL macros, we can always add compiler conditionals in
with alternative definitions.
I intend to make similar changes for INF and NAN. The SNAN macros
already just use __builtin_nans etc. with no fallback for compilers
not claiming to be GCC 3.3 or later.
Tested for x86_64.
* math/math.h: Do not include bits/huge_val.h, bits/huge_valf.h,
bits/huge_vall.h or bits/huge_val_flt128.h.
(HUGE_VAL): Define directly here.
[__USE_ISOC99] (HUGE_VALF): Likewise.
[__USE_ISOC99] (HUGE_VALL): Likewise.
[__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)]
(HUGE_VAL_F128): Likewise.
* math/Makefile (headers): Remove bits/huge_val.h,
bits/huge_valf.h, bits/huge_vall.h and bits/huge_val_flt128.h.
* bits/huge_val.h: Remove.
* bits/huge_val_flt128.h: Likewise.
* bits/huge_valf.h: Likewise.
* bits/huge_vall.h: Likewise.
* sysdeps/ia64/bits/huge_vall.h: Likewise.
* sysdeps/ieee754/bits/huge_val.h: Likewise.
* sysdeps/ieee754/bits/huge_valf.h: Likewise.
* sysdeps/m68k/m680x0/bits/huge_vall.h: Likewise.
* sysdeps/sh/bits/huge_val.h: Likewise.
* sysdeps/sparc/bits/huge_vall.h: Likewise.
* sysdeps/x86/bits/huge_vall.h: Likewise.
|
|
The current bits/math-finite.h approach to defining functions for
different types, involving math.h defining _MSUF_ and _MSUFTO_ for the
function suffixes involved, is not namespace-clean if one of those
suffixes (f, l, f128) is defined as a macro by the user before math.h
is included; too many levels of macro expansion occur. Instead, those
suffixes should appear directly in the expansion of the macro using ##
so they don't get expanded even if defined as macros by the user (that
is, math.h should be defining __REDIRFROM_X and __REDIRTO_X directly
to use those suffixes rather than suffixes being passed as an argument
by macro callers). This patch makes that change.
Tested for x86_64.
[BZ #22028]
* math/math.h [__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0]
(_MSUF_): Remove macro.
[__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0] (_MSUFTO_):
Likewise.
[__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0]
(__REDIRFROM_X): New macro.
[__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0] (__REDIRTO_X):
Likewise.
* math/bits/math-finite.h (__REDIRFROM_X): Remove macro.
(__REDIRTO_X): Likewise.
(__MATH_REDIRCALL): Do not pass _MSUF_ or _MSUFTO_ macro
arguments.
(__MATH_REDIRCALL_2): Likewise.
(__MATH_REDIRCALL_INTERNAL): Likewise.
(__REDIRFROM (lgamma, , _MSUF_)): Likewise.
(__REDIRFROM (gamma, , _MSUF_)): Likweise.
(__REDIRFROM (__gamma, _r_finite, _MSUF_)): Likewise.
(__REDIRFROM (tgamma, , _MSUF_)): Likewise.
* math/test-finite-macros.c: New file.
* math/Makefile (tests): Add test-finite-macros.
(CFLAGS-test-finite-macros.c): New variable.
|
|
The macro __MATH_TG contains the logic to select between long double and
_Float128, when these types are ABI-distinct. This logic relies on
__builtin_types_compatible_p, which is not available in C++ mode.
On the other hand, C++ function overloading provides the means to
distinguish between the floating-point types. The overloading
resolution will match the correct parameter regardless of type
qualifiers, i.e.: const and volatile.
Tested for powerpc64le, s390x, and x86_64.
* math/math.h [defined __cplusplus] (issignaling): Provide a C++
definition for issignaling that does not rely on __MATH_TG,
since __MATH_TG uses __builtin_types_compatible_p, which is only
available in C mode.
(CFLAGS-test-math-issignaling.cc): New variable.
* math/Makefile [CXX] (tests): Add test-math-issignaling.
* math/test-math-issignaling.cc: New test for C++ implementation
of type-generic issignaling.
* sysdeps/powerpc/powerpc64le/Makefile [subdir == math]
(CXXFLAGS-test-math-issignaling.cc): Add -mfloat128 to the build
options of test-math-issignaling on powerpc64le.
|
|
|
|
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling. matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.
The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).
Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used. If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).
I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).
Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128. This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly. Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.
I intend to move to the new wrappers for static libm and new ports in
followup patches. I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed. GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed). Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for. But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.
Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).
As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
[__USE_MISC] (_LIB_VERSION): Likewise.
[__USE_MISC] (struct exception): Likewise.
[__USE_MISC] (matherr): Likewise.
[__USE_MISC] (DOMAIN): Likewise.
[__USE_MISC] (SING): Likewise.
[__USE_MISC] (OVERFLOW): Likewise.
[__USE_MISC] (UNDERFLOW): Likewise.
[__USE_MISC] (TLOSS): Likewise.
[__USE_MISC] (PLOSS): Likewise.
[__USE_MISC] (HUGE): Likewise.
[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
* math/math-svid-compat.h: New file.
* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
and matherrl.
* include/math.h [!_ISOMAC] (__matherr): Remove.
* manual/arith.texi (FP Exceptions): Do not document matherr.
* math/Makefile (tests): Change test-matherr to test-matherr-3.
(tests-internal): New variable.
(install-lib): Do not add libieee.a.
(non-lib.a): Likewise.
(extra-objs): Do not add libieee.a and ieee-math.o.
(CPPFLAGS-s_lib_version.c): Remove variable.
($(objpfx)libieee.a): Remove rule.
($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
* math/ieee-math.c: Remove.
* math/libm-test-support.c (matherr): Remove.
* math/test-matherr.c: Use <support/test-driver.c>. Add copyright
and license notices. Include <math-svid-compat.h> and
<shlib-compat.h>.
(matherr): Undefine as macro. Use compat_symbol_reference.
(_LIB_VERSION): Likewise.
* math/test-matherr-2.c: New file.
* math/test-matherr-3.c: Likewise.
* sysdeps/generic/math_private.h (__kernel_standard): Remove
declaration.
(__kernel_standard_f): Likewise.
(__kernel_standard_l): Likewise.
* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(_LIB_VERSION): Undefine as macro.
(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define
only if [LIBM_SVID_COMPAT || !defined SHARED]. If
[LIBM_SVID_COMPAT], use compat_symbol.
* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(matherr): Undefine as macro.
(__matherr): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
compat_symbol_reference.
[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
(MATHERR_D): Remove declaration.
[!_LIBC] (_LIB_VERSION_TYPE): Likewise
[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
[LIBM_BUILD] (pmatherrf): Likewise.
[LIBM_BUILD] (pmatherr): Likewise.
[LIBM_BUILD] (pmatherrl): Likewise.
(DOMAIN): Likewise.
(SING): Likewise.
(OVERFLOW): Likewise.
(UNDERFLOW): Likewise.
(TLOSS): Likewise.
(PLOSS): Likewise.
* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
(__matherrf): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
(__matherrl): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* math/lgamma-compat.h: Include <math-svid-compat.h>.
* math/w_acos_compat.c: Likewise.
* math/w_acosf_compat.c: Likewise.
* math/w_acosh_compat.c: Likewise.
* math/w_acoshf_compat.c: Likewise.
* math/w_acoshl_compat.c: Likewise.
* math/w_acosl_compat.c: Likewise.
* math/w_asin_compat.c: Likewise.
* math/w_asinf_compat.c: Likewise.
* math/w_asinl_compat.c: Likewise.
* math/w_atan2_compat.c: Likewise.
* math/w_atan2f_compat.c: Likewise.
* math/w_atan2l_compat.c: Likewise.
* math/w_atanh_compat.c: Likewise.
* math/w_atanhf_compat.c: Likewise.
* math/w_atanhl_compat.c: Likewise.
* math/w_cosh_compat.c: Likewise.
* math/w_coshf_compat.c: Likewise.
* math/w_coshl_compat.c: Likewise.
* math/w_exp10_compat.c: Likewise.
* math/w_exp10f_compat.c: Likewise.
* math/w_exp10l_compat.c: Likewise.
* math/w_exp2_compat.c: Likewise.
* math/w_exp2f_compat.c: Likewise.
* math/w_exp2l_compat.c: Likewise.
* math/w_fmod_compat.c: Likewise.
* math/w_fmodf_compat.c: Likewise.
* math/w_fmodl_compat.c: Likewise.
* math/w_hypot_compat.c: Likewise.
* math/w_hypotf_compat.c: Likewise.
* math/w_hypotl_compat.c: Likewise.
* math/w_j0_compat.c: Likewise.
* math/w_j0f_compat.c: Likewise.
* math/w_j0l_compat.c: Likewise.
* math/w_j1_compat.c: Likewise.
* math/w_j1f_compat.c: Likewise.
* math/w_j1l_compat.c: Likewise.
* math/w_jn_compat.c: Likewise.
* math/w_jnf_compat.c: Likewise.
* math/w_jnl_compat.c: Likewise.
* math/w_lgamma_main.c: Likewise.
* math/w_lgamma_r_compat.c: Likewise.
* math/w_lgammaf_main.c: Likewise.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_main.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* math/w_log10_compat.c: Likewise.
* math/w_log10f_compat.c: Likewise.
* math/w_log10l_compat.c: Likewise.
* math/w_log2_compat.c: Likewise.
* math/w_log2f_compat.c: Likewise.
* math/w_log2l_compat.c: Likewise.
* math/w_log_compat.c: Likewise.
* math/w_logf_compat.c: Likewise.
* math/w_logl_compat.c: Likewise.
* math/w_pow_compat.c: Likewise.
* math/w_powf_compat.c: Likewise.
* math/w_powl_compat.c: Likewise.
* math/w_remainder_compat.c: Likewise.
* math/w_remainderf_compat.c: Likewise.
* math/w_remainderl_compat.c: Likewise.
* math/w_scalb_compat.c: Likewise.
* math/w_scalbf_compat.c: Likewise.
* math/w_scalbl_compat.c: Likewise.
* math/w_sinh_compat.c: Likewise.
* math/w_sinhf_compat.c: Likewise.
* math/w_sinhl_compat.c: Likewise.
* math/w_sqrt_compat.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* math/w_tgamma_compat.c: Likewise.
* math/w_tgammaf_compat.c: Likewise.
* math/w_tgammal_compat.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/k_standard.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
|
|
This patch adds a more thorough test of tgmath.h macros, verifying
both the return type and the function called for all the cases of
valid argument types. (Cases with current problems - I've just filed
four bugs - are disabled or omitted pending fixing those problems.)
The test uses a Python generator (works with both Python 2 and 3) to
generate a C file which is then built and run as a test in the usual
way (and that C file includes its own dummy definitions of libm
functions similar to existing tgmath.h tests). The motivation is to
make it easier to add tests of tgmath.h for _Float128 when adding
tgmath.h support for that type; the _FloatN / _FloatNx support is
present in the script, but disabled until the tgmath.h support is
written.
Tested for x86_64, and for arm to check things in the long double =
double case. (In that case, it's OK to call either double or long
double functions when the selected type is double or long double, as
long as the return type of the macro is exactly correct.)
* math/gen-tgmath-tests.py: New file.
* math/Makefile [PYTHON] (tests): Add test-tgmath3.
[PYTHON] (generated): Add test-tgmath3.c.
[PYTHON] (CFLAGS-test-tgmath3.c): New variable.
[PYTHON] ($(objpfx)test-tgmath3.c): New rule.
|
|
This patch converts the implementation of exp2l in math/e_exp2l.c into
a template in math/e_exp2_template.c, then adjusts Makefile to use
this template for long double (the implementations for float and
double in sysdeps have higher precedence and are not used). This
template can also be used for float128, thus reducing the amount of
duplicated code that gets added when adding support the new type.
Tested for powerpc64le and s390x.
* math/Makefile (libm-calls): Move e_exp2F to gen-libm-calls.
(gen-libm-calls): Add e_exp2F to use the template.
* math/e_exp2l.c: Rename to math/e_exp2_template.c.
* math/e_exp2_template.c: New file, renamed from
math/e_exp2l.c, and made into a template.
* sysdeps/generic/math-type-macros.h (M_MIN_EXP): New macro.
|
|
This introduces the machine-dependent bits/floatn.h to control
the inclusion of _Float128 ABI.
* bits/floatn.h: New file.
* bits/huge_val_flt128.h: Likewise.
* bits/libm-simd-decl-stubs.h (__DECL_SIMD_cosf128): New macro.
(__DECL_SIMD_sinf128): Likewise.
(__DECL_SIMD_sincosf128): Likewise.
(__DECL_SIMD_logf128): Likewise.
(__DECL_SIMD_expf128): Likewise.
(__DECL_SIMD_powf128): Likewise.
* math/Makefile (headers): Install bits/floatn.h and
bits/huge_val_flt128.h.
* math/bits/cmathcalls.h (_Mdouble_complex_): Only define if not
defined.
* math/bits/mathcalls.h (pow10, isinf, finite, drem, significand)
(isnan, gamma, nexttoward, scalb): Only define if not
__MATH_DECLARING_FLOATN.
(nextdown, nextup, llogb, roundeven, fromfp, ufromfp, fromfpx)
(ufromfpx, fmaxmag, fminmag, totalorder, totalordermag)
(canonicalize, getpayload, setpayload, setpayloadsig): Declare for
_FloatN even if __STDC_WANT_IEC_60559_BFP_EXT__ is not defined.
* math/complex.h: Include bits/libc-header-start.h and bits/floatn.h.
Include bits/cmathcalls.h to get the declarations of _Float128
versions of complex functions.
[__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)] (CMPLXF128):
Define macro.
* math/math.h: Include bits/floatn.h and bits/huge_val_flt128.h.
Include bits/mathcalls-helper-functions.h and bits/mathcalls.h to
get the declarations of _Float128 versions of math functions.
(__MATH_DECLARING_FLOATN): New macro to control declaration of
_FloatN types.
[__GNUC_PREREQ (6,0)] (signbit): Since GCC 6.0, __builtin_signbit
is type-generic, so use it without __MATH_TG.
[__HAVE_DISTINCT_FLOAT128] (isinf): This builtin is broken for
_Float128 type on GCC < 7.0. Explicitly call __isinff128 for
_Float128 type and GCC < 7.0, otherwise use the builtin.
[__HAVE_FLOAT128 && defined __USE_GNU] (M_Ef128, M_LOG2Ef128)
(M_LOG10Ef128, M_LN2f128, M_LN10f128, M_PIf128, M_PI_2f128)
(M_PI_4f128, M_1_PIf128, M_2_PIf128, M_SQRT2f128, M_SQRT1_2f128):
New _GNU_SOURCE enabled macros.
|
|
This adds the appropriate common bits for a platform to
enable float128 and expose ABI.
* math/Makefile:
(type-float128-suffix): New variable
(type-float128-routines): Likewise
(type-float128-yes): Likewise
(types): Append float128 if supported
(types-basic): New variable to control the use of templates for
float, double, and long double, but not for float128 or newer types.
(type-basic-foreach): Likewise.
* sysdeps/ieee754/float128/Makeconfig: New file.
* sysdeps/ieee754/float128/Versions: New file.
|
|
The classification macros: finite, fpclassify, iseqsig, isinf, isnan,
issignaling, and signbit are defined by ISO C11 and declared in
mathcalls.h for each of the floating-point types: float, double, and
long double.
TS 18661-3 does not mention these macros for float128, however support
for them must be present when _Float128 is present. This is true,
even when the feature test macro __STDC_WANT_IEC_60559_TYPES_EXT__ is
false. Other function declarations in mathcalls.h, on the other hand,
depend on __STDC_WANT_IEC_60559_TYPES_EXT__.
This patch splits the helper functions (__finite, __fpclassify,
__iseqsig, __isinf, __isnan, __issignaling, and __signbit) from
mathcalls.h, so that these helper functions can be declared for
_Float128, even when __STDC_WANT_IEC_60559_TYPES_EXT__ is false.
Tested for powerpc64le, s390x, and x86_64.
* include/bits/mathcalls-helper-functions.h: New file.
* math/Makefile (headers): Add bits/mathcalls-helper-functions.h.
* math/bits/mathcalls.h (__finite, __fpclassify, __iseqsig)
(__isinf, __isnan, __issignaling, __signbit): Move declarations to
math/bits/mathcalls-helper-functions.h.
* math/bits/mathcalls-helper-functions.h: New file.
* math/math.h: Include bits/mathcalls-helper-functions.h for
float, double, and long double.
|
|
At present, libm tests for each function get built into a single
executable (for each floating point type, for each of normal / inline
/ finite-math-only functions, plus vector variants) and run together,
resulting in a single PASS or FAIL (for each of those nine variants
plus vector variants). Building this executable involves reading
over 50 MB of libm-test-*.c sources.
This patch arranges for tests of each function to be run separately
from the makefiles instead. There are 121 functions being tested for
each (type, variant pair) (actually 126, but run as 121 from the
Makefile because each of the pairs (exp10, pow10), (isfinite, finite),
(lgamma, gamma), (remainder, drem), (scalbn, ldexp), shares a table of
test results and so is run together), so 1089 separate tests run from
the Makefile, plus 48 vector tests on x86_64 (six functions for eight
vector variants). Each test only involves a libm-test-<func>.c file
of no more than about 4 MB, rather than all such files taking about 50
MB. With tests run separately, test summaries will indicate which
functions actually have problems (of course, those problems may just
be out-of-date libm-test-ulps files if the file hasn't been updated
for the architecture in question recently).
All the .c files for the 1089+48 tests are generated automatically
from the Makefiles. Various checked-in boilerplate .c files are
removed as no longer needed. CFLAGS definitions for the different
kinds of tests are generated using makefile iterators to apply
target-specific variable settings. libm-have-vector-test.h is no
longer needed; the list of functions to test for each vector type is
now in the sysdeps Makefile.
This should reduce the amount of boilerplate needed for float128
testing support; test-float128.h will still be needed, but not various
.c files or Makefile CFLAGS definitions. The logic for creating
dependencies on libm-test-support-*.o files should also render
<https://sourceware.org/ml/libc-alpha/2017-02/msg00279.html>
unnecessary.
Tested for x86_64 and x86.
* math/Makefile (libm-tests-generated): Remove variable.
(libm-tests-base-normal): New variable.
(libm-tests-base-finite): Likewise.
(libm-tests-base-inline): Likewise.
(libm-tests-base): Likewise.
(libm-tests-normal): Likewise.
(libm-tests-finite): Likewise.
(libm-tests-inline): Likewise.
(libm-tests-vector): Likewise.
(libm-tests): Define in terms of these new variables.
(libm-tests-for-type): New variable.
(libm-tests.o): Move definition.
(tests): Move addition of $(libm-tests).
(generated): Update for new and removed libm test files.
($(objpfx)libm-test.c): Remove target.
($(objpfx)libm-have-vector-test.h): Likewise.
(CFLAGS-test-double-vlen2.c): Remove variable.
(CFLAGS-test-double-vlen4.c): Likewise.
(CFLAGS-test-double-vlen8.c): Likewise.
(CFLAGS-test-float-vlen4.c): Likewise.
(CFLAGS-test-float-vlen8.c): Likewise.
(CFLAGS-test-float-vlen16.c): Likewise.
(CFLAGS-test-float.c): Likewise.
(CFLAGS-test-float-finite.c): Likewise.
(CFLAGS-libm-test-support-float.c): Likewise.
(CFLAGS-test-double.c): Likewise.
(CFLAGS-test-double-finite.c): Likewise.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-test-ldouble.c): Likewise.
(CFLAGS-test-ldouble-finite.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
(libm-test-inline-cflags): New variable.
(CFLAGS-test-ifloat.c): Remove variable.
(CFLAGS-test-idouble.c): Likewise.
(CFLAGS-test-ildouble.c): Likewise.
($(addprefix $(objpfx), $(libm-tests.o))): Move target and update
dependencies.
($(foreach t,$(libm-tests-normal),$(objpfx)$(t).c)): New rule.
($(foreach t,$(libm-tests-finite),$(objpfx)$(t).c)): Likewise.
($(foreach t,$(libm-tests-inline),$(objpfx)$(t).c)): Likewise.
($(foreach t,$(libm-tests-vector),$(objpfx)$(t).c)): Likewise.
($(foreach t,$(types),$(objpfx)libm-test-support-$(t).c)):
Likewise.
(dependencies on libm-test-support-*.o): Remove.
($(foreach f,$(libm-test-funcs-all),$(objpfx)$(o)-$(f).o)): New
rules using iterators.
($(addprefix $(objpfx),$(call libm-tests-for-type,$(o)))):
Likewise.
($(objpfx)libm-test-support-$(o).o): Likewise.
($(addprefix $(objpfx),$(filter-out $(tests-static)
$(libm-vec-tests),$(tests)))): Filter out $(libm-tests-vector)
instead.
($(addprefix $(objpfx), $(libm-vec-tests))): Use iterator to
define rule instead.
* math/README.libm-test: Update.
* math/libm-test-acos.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-acosh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-asin.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-asinh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-atan.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-atan2.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-atanh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cabs.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cacos.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cacosh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-canonicalize.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-carg.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-casin.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-casinh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-catan.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-catanh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cbrt.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ccos.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ccosh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ceil.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cexp.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cimag.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-clog.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-clog10.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-conj.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-copysign.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cos.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cosh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cpow.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-cproj.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-creal.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-csin.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-csinh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-csqrt.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ctan.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ctanh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-erf.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-erfc.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-exp.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-exp10.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-exp2.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-expm1.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fabs.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fdim.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-floor.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fma.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fmax.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fmaxmag.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fmin.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fminmag.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fmod.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fpclassify.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-frexp.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fromfp.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-fromfpx.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-getpayload.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-hypot.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ilogb.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-iscanonical.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-iseqsig.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isfinite.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isgreater.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isgreaterequal.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isinf.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isless.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-islessequal.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-islessgreater.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isnan.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isnormal.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-issignaling.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-issubnormal.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-isunordered.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-iszero.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-j0.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-j1.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-jn.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-lgamma.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-llogb.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-llrint.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-llround.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-log.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-log10.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-log1p.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-log2.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-logb.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-lrint.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-lround.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-modf.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-nearbyint.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-nextafter.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-nextdown.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-nexttoward.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-nextup.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-pow.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-remainder.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-remquo.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-rint.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-round.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-roundeven.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-scalb.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-scalbln.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-scalbn.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-setpayload.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-setpayloadsig.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-signbit.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-significand.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-sin.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-sincos.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-sinh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-sqrt.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-tan.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-tanh.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-tgamma.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-totalorder.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-totalordermag.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-trunc.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ufromfp.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-ufromfpx.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-y0.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-y1.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-yn.inc: Include libm-test-driver.c.
(do_test): New function.
* math/libm-test-driver.c: Do not include libm-have-vector-test.h.
(HAVE_VECTOR): Remove macro.
(START): Do not call HAVE_VECTOR.
* math/test-double-vlen2.h (FUNC_TEST): Remove macro.
* math/test-double-vlen4.h (FUNC_TEST): Remove macro.
* math/test-double-vlen8.h (FUNC_TEST): Remove macro.
* math/test-float-vlen16.h (FUNC_TEST): Remove macro.
* math/test-float-vlen4.h (FUNC_TEST): Remove macro.
* math/test-float-vlen8.h (FUNC_TEST): Remove macro.
* math/test-math-vector.h (FUNC_TEST): New macro.
(WRAPPER_DECL): Rename to WRAPPER_DECL_f.
* sysdeps/x86_64/fpu/Makefile (double-vlen2-funcs): New variable.
(double-vlen4-funcs): Likewise.
(double-vlen4-avx2-funcs): Likewise.
(double-vlen8-funcs): Likewise.
(float-vlen4-funcs): Likewise.
(float-vlen8-funcs): Likewise.
(float-vlen8-avx2-funcs): Likewise.
(float-vlen16-funcs): Likewise.
(CFLAGS-test-double-vlen4-avx2.c): Remove variable.
(CFLAGS-test-float-vlen8-avx2.c): Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4.h (TEST_VECTOR_cos): Remove
macro.
(TEST_VECTOR_sin): Likewise.
(TEST_VECTOR_sincos): Likewise.
(TEST_VECTOR_log): Likewise.
(TEST_VECTOR_exp): Likewise.
(TEST_VECTOR_pow): Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8.h (TEST_VECTOR_cos):
Likewise.
(TEST_VECTOR_sin): Likewise.
(TEST_VECTOR_sincos): Likewise.
(TEST_VECTOR_log): Likewise.
(TEST_VECTOR_exp): Likewise.
(TEST_VECTOR_pow): Likewise.
* sysdeps/x86_64/fpu/test-float-vlen16.h (TEST_VECTOR_cosf):
Likewise.
(TEST_VECTOR_sinf): Likewise.
(TEST_VECTOR_sincosf): Likewise.
(TEST_VECTOR_logf): Likewise.
(TEST_VECTOR_expf): Likewise.
(TEST_VECTOR_powf): Likewise.
* sysdeps/x86_64/fpu/test-float-vlen8.h (TEST_VECTOR_cosf):
Likewise.
(TEST_VECTOR_sinf): Likewise.
(TEST_VECTOR_sincosf): Likewise.
(TEST_VECTOR_logf): Likewise.
(TEST_VECTOR_expf): Likewise.
(TEST_VECTOR_powf): Likewise.
* math/gen-libm-have-vector-test.sh: Remove file.
* math/libm-test.inc: Likewise.
* math/libm-test-support-double.c: Likewise.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/test-double-finite.c: Likewise.: Likewise.
* math/test-double.c: Likewise.
* math/test-float-finite.c: Likewise.
* math/test-float.c: Likewise.
* math/test-idouble.c: Likewise.
* math/test-ifloat.c: Likewise.
* math/test-ildouble.c: Likewise.
* math/test-ldouble-finite.c: Likewise.
* math/test-ldouble.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen2.h: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen16.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen4.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen4.h: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen8-avx2.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen8.c: Likewise.
|
|
Several wrappers for IEEE functions use _LIB_VERSION / matherr /
__kernel_standard functionality, which we want to obsolete. New
wrappers, such as for float128, must not use this functionality.
This patch adds new wrappers that only __set_errno and can be used by
the new float128 wrappers.
Tested for powerpc64le.
* math/Makefile: Add wrappers to gen-libm-calls.
* math/w_acos_template.c: New file.
* math/w_acosh_template.c: Likewise.
* math/w_asin_template.c: Likewise.
* math/w_atan2_template.c: Likewise.
* math/w_atanh_template.c: Likewise.
* math/w_cosh_template.c: Likewise.
* math/w_exp10_template.c: Likewise.
* math/w_exp2_template.c: Likewise.
* math/w_exp_template.c: Likewise.
* math/w_fmod_template.c: Likewise.
* math/w_hypot_template.c: Likewise.
* math/w_j0_template.c: Likewise.
* math/w_j1_template.c: Likewise.
* math/w_jn_template.c: Likewise.
* math/w_lgamma_r_template.c: Likewise.
* math/w_lgamma_template.c: Likewise.
* math/w_log10_template.c: Likewise.
* math/w_log2_template.c: Likewise.
* math/w_log_template.c: Likewise.
* math/w_pow_template.c: Likewise.
* math/w_remainder_template.c: Likewise.
* math/w_sinh_template.c: Likewise.
* math/w_sqrt_template.c: Likewise.
* math/w_tgamma_template.c: Likewise.: Likewise.
* sysdeps/generic/math-type-macros-double.h
(__USE_WRAPPER_TEMPLATE): New macro to control inclusion of
the new wrappers.
* sysdeps/generic/math-type-macros-float.h: Likewise.
* sysdeps/generic/math-type-macros-ldouble.h: Likewise.
|
|
This patch moves tests of catan and catanh with finite inputs (other
than the divide-by-zero cases producing an exact infinity) to using
the auto-libm-test machinery. Each of auto-libm-test-out-catan and
auto-libm-test-out-catanh takes about three seconds to generate on my
system (so in fact it wasn't necessary after all to defer the move to
auto-libm-test-* until the output files were split up by function).
Tested for x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of catan and catanh.
* math/auto-libm-test-out-catan: New generated file.
* math/auto-libm-test-out-catanh: Likewise.
* math/libm-test-catan.inc (catan_test_data): Use AUTO_TESTS_c_c.
Move tests with finite inputs, except divide-by-zero cases, to
auto-libm-test-in.
* math/libm-test-catanh.inc (catanh_test_data): Likewise.
* math/Makefile (libm-test-funcs-auto): Add catan and catanh.
(libm-test-funcs-noauto): Remove catan and catanh.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of casin and casinh with finite inputs to using
the auto-libm-test machinery. Each of auto-libm-test-out-casin and
auto-libm-test-out-casinh takes about 38 minutes to generate on my
system because of MPC slowness on special cases that appear in the
tests (with MPC 1.0.3; I don't know to what extent current MPC master
might speed it up).
Tested for x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of casin and casinh.
* math/auto-libm-test-out-casin: New generated file.
* math/auto-libm-test-out-casinh: Likewise.
* math/libm-test-casin.inc (casin_test_data): Use AUTO_TESTS_c_c.
Move tests with finite inputs to auto-libm-test-in.
* math/libm-test-casinh.inc (casinh_test_data): Likewise.
* math/Makefile (libm-test-funcs-auto): Add casin and casinh.
(libm-test-funcs-noauto): Remove casin and casinh.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of cacos and cacosh with finite inputs to using
the auto-libm-test machinery. Each of auto-libm-test-out-cacos and
auto-libm-test-out-cacosh takes about 80 minutes to generate on my
system because of MPC slowness on special cases that appear in the
tests (with MPC 1.0.3; I don't know to what extent current MPC master
might speed it up).
Tested for x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of cacos and cacosh.
* math/auto-libm-test-out-cacos: New generated file.
* math/auto-libm-test-out-cacosh: Likewise.
* math/libm-test-cacos.inc (cacos_test_data): Use AUTO_TESTS_c_c.
Move tests with finite inputs to auto-libm-test-in.
* math/libm-test-cacosh.inc (cacosh_test_data): Likewise.
* math/Makefile (libm-test-funcs-auto): Add cacos and cacosh.
(libm-test-funcs-noauto): Remove cacos and cacosh.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
Both libm-compat-calls and libm-compat-calls-auto list the functions
that must be built for the types float, double, and long double, but
not for other floating-point types that get added to libm. Besides
that, the use of libm-compat-calls-ldouble-yes to select if
w_lgamma_compatl and k_standardl should be built for long-double (in
libm-compat-calls) has the same effect of the use of type-foreach
(in libm-compat-calls-auto).
This patch merges the contents of libm-compat-calls into
libm-compat-calls-auto, then renames the latter to libm-compat-calls.
Tested for powerpc64le, s390, and x86_64.
* math/Makefile (libm-compat-calls-ldouble-yes): Merge into
libm-compat-calls-auto.
(libm-compat-calls): Likewise.
(libm-compat-calls-auto): Rename to libm-compat-calls and add
w_lgamma_compatF and k_standardF (merged from the items above).
(libm-routines): Use libm-compat-calls, instead of
libm-compat-calls-auto, with type-foreach.
|
|
The libm tests of inline functions undefine __NO_MATH_INLINES (from
math-CPPFLAGS) in test-math-inline.h, but __LIBC_INTERNAL_MATH_INLINES
via -U options in the makefile.
This is an odd inconsistency between the handling of the two macros.
It also depends on the ordering (in compilation commands) of the
various variables providing compiler options (which I think is why
it's using CPPFLAGS-*.c instead of CFLAGS-*.c).
This patch moves the undefine to test-math-inline.h, so improving
consistency and eliminating the dependency on the order in which
variables go in the compilation commands. The CPPFLAGS-*.c variables
are renamed to CFLAGS-*.c, matching those for the non-inline libm
function tests.
By moving the -U option to the header file, this should ensure that
ordering issues don't arise with a subsequent move of the options to
these tests to target-specific CFLAGS += ... variable settings (for
when tests for each function are build separately and so compilation
options need setting for many more makefile targets, for which
target-specific variable settings seem to be the most convenient form
to generate with iterators).
Tested for x86_64.
* math/test-math-inline.h (__LIBC_INTERNAL_MATH_INLINES): Undefine
macro.
* math/Makefile (CPPFLAGS-test-ifloat.c): Rename to ...
(CFLAGS-test-ifloat.c): ... this. Remove
-U__LIBC_INTERNAL_MATH_INLINES.
* math/Makefile (CPPFLAGS-test-idouble.c): Rename to ...
(CFLAGS-test-idouble.c): ... this. Remove
-U__LIBC_INTERNAL_MATH_INLINES.
* math/Makefile (CPPFLAGS-test-ildouble.c): Rename to ...
(CFLAGS-test-ildouble.c): ... this. Remove
-U__LIBC_INTERNAL_MATH_INLINES.
|
|
libm-test-driver.c contains various functions used in the course of
libm testing, which are built as part of each test using this
machinery.
Currently, these functions get built for three tests for each type
(e.g. test-float, test-ifloat, test-float-finite), plus the vector
function tests. All these tests are huge and thus slow to build; the
output of gen-libm-test.pl totals around 40 MB across all functions.
To make the individual tests built from the Makefile smaller, it makes
sense to split these tests up so the tests for each function are built
separately (thus, three tests for each (function, type) pair, plus
vector tests built only for functions that actually have vector
versions). This improves parallelism and means that if tests fail,
the summary of failed tests makes it more obvious where the problem
might be without needing to look in the .out files to see which
functions' tests failed (though architecture maintainers still need to
keep libm-test-ulps up to date to avoid spurious failures of little
interest).
Simply including libm-test-driver.c as-is in such individual-function
tests does not work because of unused static check_* functions (those
functions only being used for the types of the outputs of the function
under test). It also means the common code gets built over 1000 times
instead of nine (plus vector tests). To avoid that issue, this patch
splits out the bulk of the libm-test-driver.c code into a separate
file libm-test-support.c (with a few functions made non-static). That
separate file is built only once for each floating-point type (so at
present three times, or twice on architectures with long double =
double). Definitions needed in both libm-test-support.c and
libm-test-driver.c go in libm-test-support.h (it's possible some of
those are in fact only needed in one of the two files).
libm-test-driver.c keeps definitions of a limited number of variables
used to configure how libm-test-support.c behaves, various macros and
structures needed by individual-function tests, and the main function.
This move is also consistent in spirit with the move away from
test-skeleton.c having all the test support code, to a small
support/test-driver.c included in individual tests with most of the
code built separately.
Tested for x86_64 and x86.
* math/libm-test-support.c: New file. Content from
math/libm-test-driver.c.
* math/libm-test-support.h: Likewise.
* math/libm-test-support-double.c: New file.
* math/libm-test-support-float.c: Likewise.
* math/libm-test-support-ldouble.c: Likewise.
* math/libm-test-driver.c: Remove main comment and header
includes. Include libm-test-support.h.
[!_GNU_SOURCE] (_GNU_SOURCE): Do not define.
(flag_test_errno): Remove static.
(flag_test_exceptions): Likewise.
(flag_test_finite): Likewise.
(flag_test_inline): Likewise.
(flag_test_mathvec): Likewise.
(test_msg): Likewise.
(NO_EXCEPTION): Remove.
(INVALID_EXCEPTION): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION): Likewise.
(OVERFLOW_EXCEPTION): Likewise.
(UNDERFLOW_EXCEPTION): Likewise.
(INEXACT_EXCEPTION): Likewise.
(INVALID_EXCEPTION_OK): Likewise.
(DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise.
(OVERFLOW_EXCEPTION_OK): Likewise.
(UNDERFLOW_EXCEPTION_OK): Likewise.
(NO_INEXACT_EXCEPTION): Likewise.
(EXCEPTIONS_OK): Likewise.
(IGNORE_ZERO_INF_SIGN): Likewise.
(TEST_NAN_SIGN): Likewise.
(TEST_NAN_PAYLOAD): Likewise.
(NO_TEST_INLINE): Likewise.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(__CONCATX): Likewise.
(TYPE_MIN): Likewise.
(TYPE_TRUE_MIN): Likewise.
(TYPE_MAX): Likewise.
(MIN_EXP): Likewise.
(MAX_EXP): Likewise.
(MANT_DIG): Likewise.
(FSTR_MAX): Likewise.
(ulp_idx): Likewise.
(qtype_str): Remove static.
(TEST_COND_binary32): Remove.
(TEST_COND_binary64): Likewise.
(TEST_COND_binary128): Likewise.
(TEST_COND_ibm128): Likewise.
(TEST_COND_intel96): Likewise.
(TEST_COND_m68k96): Likewise.
(TEST_COND_ibm128_libgcc): Likewise.
(XFAIL_IBM128_LIBGCC): Likewise.
(PAYLOAD_DIG): Likewise.
(UNDERFLOW_EXCEPTION_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise.
(UNDERFLOW_EXCEPTION_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise.
(UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise.
(UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise.
(TEST_COND_long32): Likewise.
(TEST_COND_long64): Likewise.
(TEST_COND_before_rounding): Likewise.
(TEST_COND_after_rounding): Likewise.
(ulps_file_name): Likewise.
(ulps_file): Likewise.
(output_ulps): Likewise.
(output_dir): Likewise.
(noErrors): Likewise.
(noTests): Likewise.
(noExcTests): Likewise.
(noErrnoTests): Likewise.
(verbose): Likewise.
(output_max_error): Likewise.
(output_points): Likewise.
(ignore_max_ulp): Likewise.
(max_error): Likewise.
(real_max_error): Likewise.
(imag_max_error): Likewise.
(prev_max_error): Likewise.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(max_valid_error): Likewise.
(TYPE_DECIMAL_DIG): Likewise.
(TYPE_HEX_DIG): Likewise.
(fmt_ftostr): Likewise.
(compare_ulp_data): Likewise.
(find_ulps): Likewise.
(init_max_error): Likewise.
(set_max_error): Likewise.
(print_float): Likewise.
(print_screen): Likewise.
(print_screen_max_error): Likewise.
(update_stats): Likewise.
(print_function_ulps): Likewise.
(print_complex_function_ulps): Likewise.
(fpstack_test): Likewise.
(print_max_error): Likewise.
(print_complex_max_error): Likewise.
(test_single_exception): Likewise.
(test_exceptions): Likewise.
(test_single_errno): Likewise.
(test_errno): Likewise.
(ULPDIFF): Likewise.
(ulp): Likewise.
(check_float_internal): Likewise.
(check_float): Likewise.
(check_complex): Likewise.
(check_int): Likewise.
(check_long): Likewise.
(check_bool): Likewise.
(check_longlong): Likewise.
(check_intmax_t): Likewise.
(check_uintmax_t): Likewise.
(enable_test): Likewise.
(matherr): Likewise.
(initialize): Likewise.
(options): Likewise.
(doc): Remove static.
(argp): Likewise.
(parse_opt): Remove.
(check_ulp): Likewise.
(libm_test_init): Likewise.
(libm_test_finish): Likewise.
* math/Makefile (libm-test-support): New variable.
(test-extras): Add libm-test-support files.
(extra-test-objs): Likewise.
(CFLAGS-libm-test-support-float.c): New variable.
(CFLAGS-libm-test-support-double.c): Likewise.
(CFLAGS-libm-test-support-ldouble.c): Likewise.
($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate
libm-test-support objects.
|
|
This patch adds the "_compat" suffix to the wrappers of the function
exp, which use _LIB_VERSION / matherr / __kernel_standard
functionality.
Tested for powerpc64le, s390, and x86_64.
* math/Makefile (libm-calls): Move w_exp...
(libm-compat-calls-auto): Here.
* math/w_expl.c: Add suffix "_compat" to filename.
* sysdeps/ia64/fpu/w_expl.c: Likewise.
* sysdeps/ia64/fpu/w_expf.c: Likewise.
* sysdeps/ia64/fpu/w_exp.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl.c: Likewise.
* math/w_expl_compat.c: New file, copied from above.
* sysdeps/ia64/fpu/w_exp_compat.c: Likewise.
* sysdeps/ia64/fpu/w_expf_compat.c: Likewise.
* sysdeps/ia64/fpu/w_expl_compat.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/w_expl.c: Add suffix "_compat"
to filename.
* sysdeps/ieee754/ldbl-opt/w_exp.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: New file,
copied from above and adjusted for the new filenames.
* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Likewise.
|
|
This patch adds the suffix "_compat2" to the wrappers for lgamma,
which use _LIB_VERSION / matherr / __kernel_standard functionality.
The suffix "_compat2" is used because the suffix "_compat" is already
used.
Tested for powerpc64le, s390, and x86_64.
* math/Makefile (libm-calls): Move w_lgammaF...
(libm-compat-calls-auto): Here.
* math/w_lgamma.c: Add suffix "_compat2" to filename.
* math/w_lgammaf.c: Likewise.
* math/w_lgammal.c: Likewise.
* math/w_lgamma_compat2.c: New file, copied from above.
* math/w_lgammaf_compat2.c: Likewise.
* math/w_lgammal_compat2.c: Likewise.
|
|
This patch adds the suffix "_compat" to lgamma_r wrappers and make
some adjustments to #includes and Makefiles. This is a step towards
deprecation of wrappers that use _LIB_VERSION / matherr /
__kernel_standard functionality.
Tested for powerpc64le, s390, and x86_64.
* math/Makefile (libm-calls): Move w_lgammaF_r...
(libm-compat-calls-auto): Here.
* math/w_lgamma_r.c: Add suffix "_compat" to filename.
* math/w_lgammaf_r.c: Likewise.
* math/w_lgammal_r.c: Likewise.
* sysdeps/ia64/fpu/w_lgammal_r.c: Likewise.
* sysdeps/ia64/fpu/w_lgammaf_r.c: Likewise.
* sysdeps/ia64/fpu/w_lgamma_r.c: Likewise.
* math/w_lgamma_r_compat.c: New file, copied from above.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* sysdeps/ia64/fpu/w_lgamma_r_compat.c: Likewise.
* sysdeps/ia64/fpu/w_lgammaf_r_compat.c: Likewise.
* sysdeps/ia64/fpu/w_lgammal_r_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: Add suffix "_compat"
to filename.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r_compat.c: New file
copied from above and adjusted for the new filenames.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise.
|
|
Continuing the process of splitting up libm tests into more reasonably
sized units, this patch splits libm-test.inc into 121 separate
libm-test-<function>.inc files, one per array of test data. (There
are 126 libm *_test functions, but five of those are for functions
that are aliases for test purposes and so share arrays of test data.)
In the present patch, the 121 files get processed separately by
gen-libm-test.pl, each using only the auto-libm-test-out-<function>
file that is relevant (/dev/null for functions not using
auto-libm-test-* at all). This effectively eliminates the
serialization on running gen-libm-test.pl. However, the resulting .c
files still all get #included together, so compiling the limited
number of libm tests using libm-test.inc may still act as a
serialization point (the compilations still all have 40 MB of code to
process). libm-test.inc doesn't actually have anything in it any more
that needs gen-libm-test.pl processing, but is left as a .inc file
that gets processed to produce a .c file, rather than being renamed,
since the intent of this patch is as an intermediate step before
libm-test.inc gets removed and tests get compiled separately for each
function being tested.
Tested for x86_64.
* math/libm-test.inc: Move all tests of individual functions to
libm-test-*.inc and #include libm-test-*.c files.
(acos_test_data): Remove.
(acos_test): Likewise.
(acosh_test_data): Likewise.
(acosh_test): Likewise.
(asin_test_data): Likewise.
(asin_test): Likewise.
(asinh_test_data): Likewise.
(asinh_test): Likewise.
(atan_test_data): Likewise.
(atan_test): Likewise.
(atanh_test_data): Likewise.
(atanh_test): Likewise.
(atan2_test_data): Likewise.
(atan2_test): Likewise.
(cabs_test_data): Likewise.
(cabs_test): Likewise.
(cacos_test_data): Likewise.
(cacos_test): Likewise.
(cacosh_test_data): Likewise.
(cacosh_test): Likewise.
(canonicalize_test_data): Likewise.
(canonicalize_test): Likewise.
(carg_test_data): Likewise.
(carg_test): Likewise.
(casin_test_data): Likewise.
(casin_test): Likewise.
(casinh_test_data): Likewise.
(casinh_test): Likewise.
(catan_test_data): Likewise.
(catan_test): Likewise.
(catanh_test_data): Likewise.
(catanh_test): Likewise.
(cbrt_test_data): Likewise.
(cbrt_test): Likewise.
(ccos_test_data): Likewise.
(ccos_test): Likewise.
(ccosh_test_data): Likewise.
(ccosh_test): Likewise.
(ceil_test_data): Likewise.
(ceil_test): Likewise.
(cexp_test_data): Likewise.
(cexp_test): Likewise.
(cimag_test_data): Likewise.
(cimag_test): Likewise.
(clog_test_data): Likewise.
(clog_test): Likewise.
(clog10_test_data): Likewise.
(clog10_test): Likewise.
(conj_test_data): Likewise.
(conj_test): Likewise.
(copysign_test_data): Likewise.
(copysign_test): Likewise.
(cos_test_data): Likewise.
(cos_test): Likewise.
(cosh_test_data): Likewise.
(cosh_test): Likewise.
(cpow_test_data): Likewise.
(cpow_test): Likewise.
(cproj_test_data): Likewise.
(cproj_test): Likewise.
(creal_test_data): Likewise.
(creal_test): Likewise.
(csin_test_data): Likewise.
(csin_test): Likewise.
(csinh_test_data): Likewise.
(csinh_test): Likewise.
(csqrt_test_data): Likewise.
(csqrt_test): Likewise.
(ctan_test_data): Likewise.
(ctan_test): Likewise.
(ctanh_test_data): Likewise.
(ctanh_test): Likewise.
(erf_test_data): Likewise.
(erf_test): Likewise.
(erfc_test_data): Likewise.
(erfc_test): Likewise.
(exp_test_data): Likewise.
(exp_test): Likewise.
(exp10_test_data): Likewise.
(exp10_test): Likewise.
(pow10_test): Likewise.
(exp2_test_data): Likewise.
(exp2_test): Likewise.
(expm1_test_data): Likewise.
(expm1_test): Likewise.
(fabs_test_data): Likewise.
(fabs_test): Likewise.
(fdim_test_data): Likewise.
(fdim_test): Likewise.
(floor_test_data): Likewise.
(floor_test): Likewise.
(fma_test_data): Likewise.
(fma_test): Likewise.
(fmax_test_data): Likewise.
(fmax_test): Likewise.
(fmaxmag_test_data): Likewise.
(fmaxmag_test): Likewise.
(fmin_test_data): Likewise.
(fmin_test): Likewise.
(fminmag_test_data): Likewise.
(fminmag_test): Likewise.
(fmod_test_data): Likewise.
(fmod_test): Likewise.
(fpclassify_test_data): Likewise.
(fpclassify_test): Likewise.
(frexp_test_data): Likewise.
(frexp_test): Likewise.
(fromfp_test_data): Likewise.
(fromfp_test): Likewise.
(fromfpx_test_data): Likewise.
(fromfpx_test): Likewise.
(getpayload_test_data): Likewise.
(getpayload_test): Likewise.
(hypot_test_data): Likewise.
(hypot_test): Likewise.
(ilogb_test_data): Likewise.
(ilogb_test): Likewise.
(iscanonical_test_data): Likewise.
(iscanonical_test): Likewise.
(iseqsig_test_data): Likewise.
(iseqsig_test): Likewise.
(isfinite_test_data): Likewise.
(isfinite_test): Likewise.
(finite_test): Likewise.
(isgreater_test_data): Likewise.
(isgreater_test): Likewise.
(isgreaterequal_test_data): Likewise.
(isgreaterequal_test): Likewise.
(isinf_test_data): Likewise.
(isinf_test): Likewise.
(isless_test_data): Likewise.
(isless_test): Likewise.
(islessequal_test_data): Likewise.
(islessequal_test): Likewise.
(islessgreater_test_data): Likewise.
(islessgreater_test): Likewise.
(isnan_test_data): Likewise.
(isnan_test): Likewise.
(isnormal_test_data): Likewise.
(isnormal_test): Likewise.
(issignaling_test_data): Likewise.
(issignaling_test): Likewise.
(issubnormal_test_data): Likewise.
(issubnormal_test): Likewise.
(isunordered_test_data): Likewise.
(isunordered_test): Likewise.
(iszero_test_data): Likewise.
(iszero_test): Likewise.
(j0_test_data): Likewise.
(j0_test): Likewise.
(j1_test_data): Likewise.
(j1_test): Likewise.
(jn_test_data): Likewise.
(jn_test): Likewise.
(lgamma_test_data): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(llogb_test_data): Likewise.
(llogb_test): Likewise.
(lrint_test_data): Likewise.
(lrint_test): Likewise.
(llrint_test_data): Likewise.
(llrint_test): Likewise.
(log_test_data): Likewise.
(log_test): Likewise.
(log10_test_data): Likewise.
(log10_test): Likewise.
(log1p_test_data): Likewise.
(log1p_test): Likewise.
(log2_test_data): Likewise.
(log2_test): Likewise.
(logb_test_data): Likewise.
(logb_test): Likewise.
(lround_test_data): Likewise.
(lround_test): Likewise.
(llround_test_data): Likewise.
(llround_test): Likewise.
(modf_test_data): Likewise.
(modf_test): Likewise.
(nearbyint_test_data): Likewise.
(nearbyint_test): Likewise.
(nextafter_test_data): Likewise.
(nextafter_test): Likewise.
(nextup_test_data): Likewise.
(nextup_test): Likewise.
(nextdown_test_data): Likewise.
(nextdown_test): Likewise.
(nexttoward_test_data): Likewise.
(nexttoward_test): Likewise.
(pow_test_data): Likewise.
(pow_test): Likewise.
(remainder_test_data): Likewise.
(remainder_test): Likewise.
(drem_test): Likewise.
(remquo_test_data): Likewise.
(remquo_test): Likewise.
(rint_test_data): Likewise.
(rint_test): Likewise.
(round_test_data): Likewise.
(round_test): Likewise.
(roundeven_test_data): Likewise.
(roundeven_test): Likewise.
(scalb_test_data): Likewise.
(scalb_test): Likewise.
(scalbn_test_data): Likewise.
(scalbn_test): Likewise.
(ldexp_test): Likewise.
(scalbln_test_data): Likewise.
(scalbln_test): Likewise.
(setpayload_test_data): Likewise.
(setpayload_test): Likewise.
(setpayloadsig_test_data): Likewise.
(setpayloadsig_test): Likewise.
(signbit_test_data): Likewise.
(signbit_test): Likewise.
(sin_test_data): Likewise.
(sin_test): Likewise.
(sincos_test_data): Likewise.
(sincos_test): Likewise.
(sinh_test_data): Likewise.
(sinh_test): Likewise.
(sqrt_test_data): Likewise.
(sqrt_test): Likewise.
(tan_test_data): Likewise.
(tan_test): Likewise.
(tanh_test_data): Likewise.
(tanh_test): Likewise.
(tgamma_test_data): Likewise.
(tgamma_test): Likewise.
(totalorder_test_data): Likewise.
(totalorder_test): Likewise.
(totalordermag_test_data): Likewise.
(totalordermag_test): Likewise.
(trunc_test_data): Likewise.
(trunc_test): Likewise.
(ufromfp_test_data): Likewise.
(ufromfp_test): Likewise.
(ufromfpx_test_data): Likewise.
(ufromfpx_test): Likewise.
(y0_test_data): Likewise.
(y0_test): Likewise.
(y1_test_data): Likewise.
(y1_test): Likewise.
(yn_test_data): Likewise.
(yn_test): Likewise.
(significand_test_data): Likewise.
(significand_test): Likewise.
* math/Makefile (auto-libm-test-out-files): Remove variable.
(libm-test-funcs-noauto): New variable.
(libm-test-funcs-all): Likewise.
(libm-test-c-auto): Likewise.
(libm-test-c-noauto): Likewise.
(libm-tests-generated): Add $(libm-test-c-auto) and
$(libm-test-c-noauto).
(generated): Do not add auto-libm-test-out.
(libm-test-c-auto-obj): New variable.
(libm-test-c-noauto-obj): Likewise.
($(objpfx)libm-test.c): Do not generate or use auto-libm-test-out.
($(libm-test-c-noauto-obj)): New static pattern rule.
($(libm-test-c-auto-obj)): Likewise.
(libm-test-incs): New variable.
($(objpfx)libm-have-vector-test.h): Depend on $(libm-test-incs)
and pass it to gen-libm-have-vector-test.sh.
* math/gen-libm-have-vector-test.sh: Expect list of .inc files to
be passed on command line.
* math/libm-test-acos.inc: New file. Content from
math/libm-test.inc.
* math/libm-test-acosh.inc: Likewise.
* math/libm-test-asin.inc: Likewise.
* math/libm-test-asinh.inc: Likewise.
* math/libm-test-atan.inc: Likewise.
* math/libm-test-atan2.inc: Likewise.
* math/libm-test-atanh.inc: Likewise.
* math/libm-test-cabs.inc: Likewise.
* math/libm-test-cacos.inc: Likewise.
* math/libm-test-cacosh.inc: Likewise.
* math/libm-test-canonicalize.inc: Likewise.
* math/libm-test-carg.inc: Likewise.
* math/libm-test-casin.inc: Likewise.
* math/libm-test-casinh.inc: Likewise.
* math/libm-test-catan.inc: Likewise.
* math/libm-test-catanh.inc: Likewise.
* math/libm-test-cbrt.inc: Likewise.
* math/libm-test-ccos.inc: Likewise.
* math/libm-test-ccosh.inc: Likewise.
* math/libm-test-ceil.inc: Likewise.
* math/libm-test-cexp.inc: Likewise.
* math/libm-test-cimag.inc: Likewise.
* math/libm-test-clog.inc: Likewise.
* math/libm-test-clog10.inc: Likewise.
* math/libm-test-conj.inc: Likewise.
* math/libm-test-copysign.inc: Likewise.
* math/libm-test-cos.inc: Likewise.
* math/libm-test-cosh.inc: Likewise.
* math/libm-test-cpow.inc: Likewise.
* math/libm-test-cproj.inc: Likewise.
* math/libm-test-creal.inc: Likewise.
* math/libm-test-csin.inc: Likewise.
* math/libm-test-csinh.inc: Likewise.
* math/libm-test-csqrt.inc: Likewise.
* math/libm-test-ctan.inc: Likewise.
* math/libm-test-ctanh.inc: Likewise.
* math/libm-test-erf.inc: Likewise.
* math/libm-test-erfc.inc: Likewise.
* math/libm-test-exp.inc: Likewise.
* math/libm-test-exp10.inc: Likewise.
* math/libm-test-exp2.inc: Likewise.
* math/libm-test-expm1.inc: Likewise.
* math/libm-test-fabs.inc: Likewise.
* math/libm-test-fdim.inc: Likewise.
* math/libm-test-floor.inc: Likewise.
* math/libm-test-fma.inc: Likewise.
* math/libm-test-fmax.inc: Likewise.
* math/libm-test-fmaxmag.inc: Likewise.
* math/libm-test-fmin.inc: Likewise.
* math/libm-test-fminmag.inc: Likewise.
* math/libm-test-fmod.inc: Likewise.
* math/libm-test-fpclassify.inc: Likewise.
* math/libm-test-frexp.inc: Likewise.
* math/libm-test-fromfp.inc: Likewise.
* math/libm-test-fromfpx.inc: Likewise.
* math/libm-test-getpayload.inc: Likewise.
* math/libm-test-hypot.inc: Likewise.
* math/libm-test-ilogb.inc: Likewise.
* math/libm-test-iscanonical.inc: Likewise.
* math/libm-test-iseqsig.inc: Likewise.
* math/libm-test-isfinite.inc: Likewise.
* math/libm-test-isgreater.inc: Likewise.
* math/libm-test-isgreaterequal.inc: Likewise.
* math/libm-test-isinf.inc: Likewise.
* math/libm-test-isless.inc: Likewise.
* math/libm-test-islessequal.inc: Likewise.
* math/libm-test-islessgreater.inc: Likewise.
* math/libm-test-isnan.inc: Likewise.
* math/libm-test-isnormal.inc: Likewise.
* math/libm-test-issignaling.inc: Likewise.
* math/libm-test-issubnormal.inc: Likewise.
* math/libm-test-isunordered.inc: Likewise.
* math/libm-test-iszero.inc: Likewise.
* math/libm-test-j0.inc: Likewise.
* math/libm-test-j1.inc: Likewise.
* math/libm-test-jn.inc: Likewise.
* math/libm-test-lgamma.inc: Likewise.
* math/libm-test-llogb.inc: Likewise.
* math/libm-test-llrint.inc: Likewise.
* math/libm-test-llround.inc: Likewise.
* math/libm-test-log.inc: Likewise.
* math/libm-test-log10.inc: Likewise.
* math/libm-test-log1p.inc: Likewise.
* math/libm-test-log2.inc: Likewise.
* math/libm-test-logb.inc: Likewise.
* math/libm-test-lrint.inc: Likewise.
* math/libm-test-lround.inc: Likewise.
* math/libm-test-modf.inc: Likewise.
* math/libm-test-nearbyint.inc: Likewise.
* math/libm-test-nextafter.inc: Likewise.
* math/libm-test-nextdown.inc: Likewise.
* math/libm-test-nexttoward.inc: Likewise.
* math/libm-test-nextup.inc: Likewise.
* math/libm-test-pow.inc: Likewise.
* math/libm-test-remainder.inc: Likewise.
* math/libm-test-remquo.inc: Likewise.
* math/libm-test-rint.inc: Likewise.
* math/libm-test-round.inc: Likewise.
* math/libm-test-roundeven.inc: Likewise.
* math/libm-test-scalb.inc: Likewise.
* math/libm-test-scalbln.inc: Likewise.
* math/libm-test-scalbn.inc: Likewise.
* math/libm-test-setpayload.inc: Likewise.
* math/libm-test-setpayloadsig.inc: Likewise.
* math/libm-test-signbit.inc: Likewise.
* math/libm-test-significand.inc: Likewise.
* math/libm-test-sin.inc: Likewise.
* math/libm-test-sincos.inc: Likewise.
* math/libm-test-sinh.inc: Likewise.
* math/libm-test-sqrt.inc: Likewise.
* math/libm-test-tan.inc: Likewise.
* math/libm-test-tanh.inc: Likewise.
* math/libm-test-tgamma.inc: Likewise.
* math/libm-test-totalorder.inc: Likewise.
* math/libm-test-totalordermag.inc: Likewise.
* math/libm-test-trunc.inc: Likewise.
* math/libm-test-ufromfp.inc: Likewise.
* math/libm-test-ufromfpx.inc: Likewise.
* math/libm-test-y0.inc: Likewise.
* math/libm-test-y1.inc: Likewise.
* math/libm-test-yn.inc: Likewise.
* math/README.libm-test: Update.
|
|
math/auto-libm-test-out is, at over 30 MB, by far the largest file in
the glibc source tree. This patch splits it by function, so reducing
it to auto-libm-test-out-<func> files that are all under 5 MB in size.
This is preliminary to splitting up libm-test.inc as well so that each
function's tests can also be processed separately by
gen-libm-test.pl. As a preliminary patch it doesn't actually
implement that step; rather, all the separate files get concatenated
by the Makefile to produce the monolithic auto-libm-test-out file
again as an input to gen-libm-test.pl. (The concatentation is
identical to the file in the source tree before this patch.)
Even this preliminary step, however, is of use independent of
splitting up libm-test.inc: some tests for csin and csinh have not
been moved to auto-libm-test-in because they result in
auto-libm-test-out generation taking several minutes rather than a few
seconds (all released MPC versions are very slow for certain sin /
sinh inputs; there are some old improvements in MPC mainline which
should eventually become MPC 1.1, but the complex inverse trig and
hyperbolic functions are slow even in MPC mainline and have yet to be
moved to auto-libm-test-in at all), and it seems much more reasonable
to add such inputs to auto-libm-test-in when it will only slow down
regeneration for particular functions than when it will slow down
regeneration globally.
gen-auto-libm-tests still parses the whole input file, but only
generates output for the requested function. This ensures bad syntax
in the file is always detected, and parsing the whole file is quick;
it's output generation that is comparatively slow for some functions.
Tested for x86_64.
* math/gen-auto-libm-tests.c: Update comment about use of program.
(generate_output): Add argument FUNCTION.
(main): Require extra argument. Pass function name to
generate_output.
* math/Makefile (generated): Add auto-libm-test-out.
(libm-test-funcs-auto): New variable.
(auto-libm-test-out-files): New variable.
($(objpfx)libm-test.c): Depend on $(auto-libm-test-out-files).
Concatenate those files to form $(objpfx)auto-libm-test-out and
use it as input to gen-libm-test.pl.
* math/README.libm-test: Update.
* math/auto-libm-test-out: Remove.
* math/auto-libm-test-out-acos: New generated file.
* math/auto-libm-test-out-acosh: Likewise.
* math/auto-libm-test-out-asin: Likewise.
* math/auto-libm-test-out-asinh: Likewise.
* math/auto-libm-test-out-atan: Likewise.
* math/auto-libm-test-out-atan2: Likewise.
* math/auto-libm-test-out-atanh: Likewise.
* math/auto-libm-test-out-cabs: Likewise.
* math/auto-libm-test-out-carg: Likewise.
* math/auto-libm-test-out-cbrt: Likewise.
* math/auto-libm-test-out-ccos: Likewise.
* math/auto-libm-test-out-ccosh: Likewise.
* math/auto-libm-test-out-cexp: Likewise.
* math/auto-libm-test-out-clog: Likewise.
* math/auto-libm-test-out-clog10: Likewise.
* math/auto-libm-test-out-cos: Likewise.
* math/auto-libm-test-out-cosh: Likewise.
* math/auto-libm-test-out-cpow: Likewise.
* math/auto-libm-test-out-csin: Likewise.
* math/auto-libm-test-out-csinh: Likewise.
* math/auto-libm-test-out-csqrt: Likewise.
* math/auto-libm-test-out-ctan: Likewise.
* math/auto-libm-test-out-ctanh: Likewise.
* math/auto-libm-test-out-erf: Likewise.
* math/auto-libm-test-out-erfc: Likewise.
* math/auto-libm-test-out-exp: Likewise.
* math/auto-libm-test-out-exp10: Likewise.
* math/auto-libm-test-out-exp2: Likewise.
* math/auto-libm-test-out-expm1: Likewise.
* math/auto-libm-test-out-fma: Likewise.
* math/auto-libm-test-out-hypot: Likewise.
* math/auto-libm-test-out-j0: Likewise.
* math/auto-libm-test-out-j1: Likewise.
* math/auto-libm-test-out-jn: Likewise.
* math/auto-libm-test-out-lgamma: Likewise.
* math/auto-libm-test-out-log: Likewise.
* math/auto-libm-test-out-log10: Likewise.
* math/auto-libm-test-out-log1p: Likewise.
* math/auto-libm-test-out-log2: Likewise.
* math/auto-libm-test-out-pow: Likewise.
* math/auto-libm-test-out-sin: Likewise.
* math/auto-libm-test-out-sincos: Likewise.
* math/auto-libm-test-out-sinh: Likewise.
* math/auto-libm-test-out-sqrt: Likewise.
* math/auto-libm-test-out-tan: Likewise.
* math/auto-libm-test-out-tanh: Likewise.
* math/auto-libm-test-out-tgamma: Likewise.
* math/auto-libm-test-out-y0: Likewise.
* math/auto-libm-test-out-y1: Likewise.
* math/auto-libm-test-out-yn: Likewise.
|
|
math/Makefile uses libm-test.stmp to handle dependencies involving
multiple generated files all generated by a single sequence of
commands in a single Makefile rule.
Having separated the libm-test-ulps.h and libm-test.c generation into
separate runs of gen-libm-test.pl, there is now no need for a single
rule to generate multiple target files; each of the three target files
involved can be generated by a separate Makefile rule, meaning normal
dependencies on the individual files can be used and so libm-test.stmp
is not needed at all. This patch does just that, eliminating the
.stmp file, in further preparation for when there are many separate
libm-test-<func>.c files generated from libm-test-<func>.inc and the
dependencies are on just the relevant .c file in each case.
Tested for x86_64.
* math/Makefile (generated): Do not include libm-test.stmp.
($(addprefix $(objpfx), $(libm-tests-generated))): Do not depend
on $(objpfx)libm-test.stmp.
($(objpfx)libm-test.stmp): Remove rule.
($(objpfx)libm-test-ulps.h): New rule.
($(objpfx)libm-test.c): Likewise.
($(objpfx)libm-have-vector-test.h): Likewise.
($(addprefix $(objpfx), $(libm-tests.o)): Depend directly on
individual generated files, not libm-test.stmp.
|
|
This patch reworks how input and output files are specified for
gen-libm-test.pl.
Previously, the script had names of various inputs and outputs
hardcoded, with a -o option to specify an output directory. This
patch replaces this with all inputs and outputs being specified
explicitly as the arguments of options passed to the script. Outputs
are only generated if the relevant option is passed, and only the
processing required for the indicated outputs is done. The Makefile
is made to pass options for generating libm-test-ulps.h in a separate
invocation of gen-libm-test.pl from that generating libm-test.c.
This is all in preparation for splitting up libm-test.inc and
auto-libm-test-out and running tests separately for each function,
when gen-libm-test.pl will be run separately for each function to
generate the .c file but only once to generate libm-test-ulps.h (and
those runs will be able to be in parallel).
Tested for x86_64. The generated libm-test.c and libm-test-ulps.h are
identical before and after the patch. Also tested the "make
regen-ulps" case.
* math/gen-libm-test.pl ($output_dir): Remove variable.
($srcdir): Likewise.
($opt_a): New variable.
($opt_c): Likewise.
($opt_C): Likewise.
($opt_H): Likewise.
(-n): Make option take argument and use it as NewUlps output.
(-a): New option. Use its argument for auto-libm-test-out input.
(-c): New option. Use its argument for libm-test.inc input.
(-C): New option. Use its argument for libm-test.c output.
(-H): New option. Use its argument for libm-test-ulps.h output.
(top level): Only process inputs needed to generate outputs
specified by command-line options. Only generate outputs
specified by command-line options.
* math/README.libm-test: Update example gen-libm-test.pl command.
* math/Makefile ($(objpfx)libm-test.stmp): Update gen-libm-test.pl
commands.
(regen-ulps): Likewise.
|
|
In <https://sourceware.org/ml/libc-alpha/2015-12/msg00543.html>,
Florian noted highly parallel builds being slowed down by
gen-libm-test.pl running during the build, when it should only run for
testing, not for building glibc itself.
This is a consequence of libm-test.c being listed in before-compile.
That listing in before-compile arose from the error reported in
<https://sourceware.org/ml/libc-hacker/1999-10/msg00054.html> when
building dependencies: at that time, dependencies were generated
separation from compilation, so if a source file included a generated
file it wasn't enough for the dependencies for the .o file to be
correct, the generated file needed to be listed in before-compile.
Since <https://sourceware.org/ml/libc-hacker/2003-05/msg00001.html>,
dependencies are generated as a side-effect of compilation. This
means that having the right dependencies for the .o files for the
tests fully suffices to ensure that libm-test.c is generated by the
time it's needed; no entry in before-compile is needed. And we indeed
have such a dependency for all the tests using libm-test.c:
$(addprefix $(objpfx), $(libm-tests.o)): $(objpfx)libm-test.stmp
Thus, the before-compile definition is unnecessary, and this patch
removes it. (This may of course move serialization from the glibc
build to glibc testing, but I intend to split up libm-test.inc so that
tests for each (floating-point type, libm function) pair are built and
run separately, which should reduce that serialization.)
Tested for x86_64.
* math/Makefile (before-compile): Remove.
|
