aboutsummaryrefslogtreecommitdiff
path: root/manual
AgeCommit message (Collapse)AuthorFilesLines
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers1-3/+2
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26Fix two spaces after sentence.Ondřej Bílka18-55/+55
Minor formatting fix that was carried by issuing sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
2014-02-26Use @Theglibc{} in manual/ipc.texi.Carlos O'Donell1-1/+1
2014-02-26Add a new "Inter-Process Communication" chapter.Carlos O'Donell4-4/+120
This patch adds a new "Inter-Process Communication" chapter to cover the sem*, msg*, and shm* functions. Initially we document only the sem* function signatures and their safety notes.
2014-02-11Remove _BSD_SOURCE and _SVID_SOURCE.Joseph Myers5-33/+12
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from the documented user API, making them into aliases for _DEFAULT_SOURCE with a #warning given, but keeping most of the features.h logic using those macros and all the exising __USE_* conditionals, on the basis that all the consequent cleanups will go in followup patches. Tested x86_64. * include/features.h: Update comment documenting feature test macros. [_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define _DEFAULT_SOURCE. * manual/creature.texi (_BSD_SOURCE): Remove documentation. (_SVID_SOURCE): Likewise. (_DEFAULT_SOURCE): Update description of default features. (Feature Test Macros): Don't mention _SVID_SOURCE in conjunction with _GNU_SOURCE. * manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE. (S_ISVTX): Likewise. * manual/math.texi (Mathematical Constants): Likewise. * manual/signal.texi (Interrupted Primitives): Likewise. * manual/startup.texi (putenv): Do not refer to _SVID_SOURCE. * math/test-matherr.c (_SVID_SOURCE): Do not define. * sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]: Don't refer to _SVID_SOURCE in warning text.
2014-02-11manual/probes.texi: Use "triggered" instead of "hit"Will Newton1-73/+79
Use the term "triggered" instead of "hit" when talking about probe points. ChangeLog: 2014-02-11 Will Newton <will.newton@linaro.org> * manual/probes.texi (Mathematical Function Probes): Use "triggered" instead of "hit".
2014-02-11manual/probes.texi: Add documentation of setjmp/longjmp probesWill Newton1-0/+40
Add some documentation of the setjmp, longjmp and longjmp_target Systemtap probe points. ChangeLog: 2014-02-11 Will Newton <will.newton@linaro.org> * manual/probes.texi (Internal Probes): Add documentation of setjmp, longjmp and longjmp_target probes.
2014-02-08manual: setjmp: fix typos/grammarMike Frysinger1-9/+9
Should hopefully be all obvious stuff. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-02-06Update contrib.texiSiddhesh Poyarekar1-7/+12
Update blurb for Roland, Alex, Ryan, Joseph and Carlos.
2014-02-05Update contrib.texiSiddhesh Poyarekar1-4/+15
This may not be a complete list of new contributors added to the list, so I'd love it if more people look at contributions and suggest additions.
2014-02-03Fix manual build warnings.Carlos O'Donell1-2/+2
The mixed use of automatic and manual node next, previous, and top specification causes warning when building the manual. This fix explicitly specifies the node's next, previous and top values to fix the warning.
2014-02-03* manual/macros.texi: Add comments before MTASC-safety macros.Alexandre Oliva1-2/+46
2014-02-03* manual/users.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+794
2014-02-03* manual/threads.texi (pthread_key_create, pthread_key_delete,Alexandre Oliva2-20/+31
pthread_getspecific, pthread_setspecific): Format with @deftypefun, and add @safety note. * manual/signal.texi: Move comments that analyze the above functions to their home place.
2014-02-02* manual/time.texi (timegm): Add missing blank after @c.Alexandre Oliva1-1/+1
Reported by Joseph Myers <joseph@codesourcery.com>.
2014-02-01* manual/check-safety.sh: New.Alexandre Oliva2-1/+121
* manual/Makefile ($(objpfx)stamp-summary): Run it.
2014-02-01* manual/terminal.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+174
2014-02-01* manual/filesys.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+222
2014-02-01* manual/errno.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+43
2014-02-01* manual/intro.texi: Document safety identifiers andAlexandre Oliva1-3/+45
conditionals.
2014-02-01* manual/string.texi (wcstok): Fix prototype.Alexandre Oliva1-19/+14
(wcstok, strtok, strtok_r): Adjust reentrancy remarks.
2014-02-01* manual/time.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+369
2014-02-01* manual/string.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+120
2014-02-01* manual/threads.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+138
2014-02-01* manual/stdio.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+249
2014-02-01* manual/syslog.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+57
2014-02-01* manual/sysinfo.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+92
2014-02-01* manual/startup.texi: Document MTASC-safety properties.Alexandre Oliva1-2/+77
2014-02-01* manual/socket.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+569
2014-02-01* manual/signal.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+137
2014-01-31* manual/setjmp.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+44
2014-01-31* manual/search.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+72
2014-01-31* manual/resource.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+84
2014-01-31* manual/process.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+72
2014-01-31* manual/platform.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+18
2014-01-31* manual/pipe.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+110
2014-01-31* manual/pattern.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+727
2014-01-31* manual/message.texi: Document MTASC-safety properties.Alexandre Oliva1-2/+157
2014-01-31[BZ #12751]Alexandre Oliva1-0/+533
* manual/memory.texi: Document MTASC-safety properties.
2014-01-31* manual/math.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+103
2014-01-31* manual/locale.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+146
2014-01-31* manual/llio.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+280
2014-01-31* manual/libdl.texi: New.Alexandre Oliva1-0/+10
2014-01-31* manual/lang.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+17
2014-01-31* manual/job.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+25
2014-01-31* manual/getopt.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+26
2014-01-31* manual/ctype.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+73
2014-01-30* manual/debug.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+26
2014-01-29* manual/charset.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+94
2014-01-29* manual/crypt.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+30
generated by cgit v1.1 at 2025-01-07 22:10:15 +0000