Age | Commit message (Collapse) | Author | Files | Lines |
|
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
|
|
consistent environment.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
|
|
This patch increases the minimum Linux kernel version for glibc to
2.6.32, as discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-01/msg00511.html>.
This patch just does the minimal change to arch_minimum_kernel
settings (and LIBC_LINUX_VERSION, which determines the minimum kernel
headers version, as it doesn't make sense for that to be older than
the minimum kernel that can be used at runtime). Followups would be
expected to do, roughly and not necessarily precisely in this order:
* Remove __LINUX_KERNEL_VERSION checks in kernel-features.h files
where those checks are always true / always false for kernels 2.6.32
and above.
* Otherwise simplify/improve conditionals in those files (for example,
where defining once in the main file then undefining in
architecture-specific files makes things clearer than having lots of
separate definitions of the same macro), possibly fixing in the
process cases where a macro should optimally have been defined for a
given architecture but wasn't. (In the review in preparation for
this version increase I checked what the right conditions should be
for all macros in the main kernel-features.h whose definitions there
would have been affected by the increase - but I only fixed that
subset of the issues found where --enable-kernel=2.6.32 would have
caused a kernel feature to be wrongly assumed to be present, not any
cases where a feature is not assumed but could be assumed.)
* Remove conditionals on __ASSUME_* where they can now be taken to be
always-true, and the definitions when the macros are only used in
Linux-specific files.
* Split more architectures out of the main kernel-features.h (like
ex-ports architectures), once various of the architecture
conditionals there have been eliminated so the new
architecture-specific files are no larger than actually necessary.
Tested x86_64.
2014-03-27 Joseph Myers <joseph@codesourcery.com>
[BZ #9894]
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Change to 2.6.32.
(arch_minimum_kernel): Change all 2.6.16 settings to 2.6.32.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/microblaze/configure.ac: Remove file.
* sysdeps/unix/sysv/linux/microblaze/configure: Likewise.
* sysdeps/unix/sysv/linux/tile/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/tile/configure: Likewise.
* README: Update reference to required Linux kernel version.
* manual/install.texi (Linux): Update reference to required Linux
kernel headers version.
* INSTALL: Regenerated.
|
|
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
|
|
Minor formatting fix that was carried by issuing
sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
|
|
The commit d136c6dc resulted in menu text for the "Top" node being added
to the INSTALL file on regeneration. As the full menu is not displayed
in the plain text file anyway, suppress the menu section completely to
avoid the additional text.
Also regenerate the INSTALL file to commit a small formatting change
introduced in the same commit.
|
|
I have skipped regenerating the INSTALL file because we want to
continue using the 4.x generator for now.
|
|
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This reverts commit 583c76a7ce305d24e0625a22caed317b3e001d91 which
breaks building info pages during "make install".
Conflicts:
ChangeLog
|
|
These were left in when the installation section was split out
into its own file.
|
|
The pt-chown binary is discussed in the "Running make install" section
without clarification of the needed configure option. Clarify this
and simplfy the discription which is already covered in the "Configuring
and compiling" section.
|
|
|
|
The helper binary pt_chown tricked into granting access to another
user's pseudo-terminal.
Pre-conditions for the attack:
* Attacker with local user account
* Kernel with FUSE support
* "user_allow_other" in /etc/fuse.conf
* Victim with allocated slave in /dev/pts
Using the setuid installed pt_chown and a weak check on whether a file
descriptor is a tty, an attacker could fake a pty check using FUSE and
trick pt_chown to grant ownership of a pty descriptor that the current
user does not own. It cannot access /dev/pts/ptmx however.
In most modern distributions pt_chown is not needed because devpts
is enabled by default. The fix for this CVE is to disable building
and using pt_chown by default. We still provide a configure option
to enable hte use of pt_chown but distributions do so at their own
risk.
|
|
Can be enabled with --enable-lock-elision=yes at configure time.
|
|
|
|
|
|
The GNU C Library does not support building for i386
therefore we remove mention of this configuration
from the INSTALL file.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[BZ #13750]
Do not build manual anymore in the source dir. Also clean up the
Makefile and remove rules that have been used previously
when we had a stand-alone Makefile which was obsoleted recently.
|
|
This reverts commit 0d80ac6813e3bf21fad6d87202e9efe6d0c17a82.
Reverting since e3945c47bdac1149a1fec5d46bd567a248cd17b9 gets reverted
as well.
|
|
|
|
The FAQ is now at http://sourceware.org/glibc/wiki/FAQ and not
anymore part of the repository.
|
|
We use sourceware.org consistently to reference the
server that RedHat provides for community services
to open-source projects.
[BZ # 13963]
* manual/install.texi: Use sourceware.org.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* README.template: Update for 2.4.
* README: Regenerated.
* manual/install.texi (Configuring and compiling): Separate build
directory is mandatory. Use glibc-2.4 in example.
Update --enable-add-ons description.
(Supported Configurations): Remove section.
* INSTALL: Regenerated.
|
|
recommend 4.1, advise 4.0 for powerpc64, and note 4.1 required for
powerpc, s390{x,} with new long double.
* INSTALL: Regenerated.
|
|
2005-11-22 Ulrich Drepper <drepper@redhat.com>
[BZ #1908]
* manual/install.texi (Tools for Compilation): Require gawk.
2005-11-22 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/ldsodefs.h (struct rtld_global): Remove
unused is_static field from slotinfo array.
|
|
(Configuring and compiling): Don't use linuxthreads as example.
* sysdeps/unix/sysv/linux/configure.in: Check for nptl add-on only,
not linuxthreads.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* resolv/Depend: Add nptl.
* rt/Depend: Likewise.
* linuxthreads, linuxthreads_db: Directories removed (preserved in
ports repository).
|
|
is now needed.
|
|
|
|
|
|
* manual/install.texi (Supported Configurations): Replace bug-glibc
mention with web URL.
* INSTALL: Regenerated.
* locale/iso-3166.def: Likewise, in comment.
* locale/iso-4217.def: Likewise.
* locale/iso-639.def: Likewise.
* posix/cpio.h: Remove bug reporting comment.
|
|
Update.
2004-05-15 Petter Reinholdtsen <pere@hungry.com>
* locale/iso-3166.def: Remove YUGOSLAVIA and insert "SERBIA AND
MONTENEGRO" which have taken over the code 819. Patch from
Danilo Segan. [BZ #40]
2004-05-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h
(SYSCALL_ERROR_HANDLER): Rename __sparc.get_pic.l7 to
__sparc_get_pic_l7.
2004-05-15 Joseph S. Myers <jsm@polyomino.org.uk>
* catgets/gencat.c: Update bug reporting instructions.
* csu/version.c: Likewise.
* debug/catchsegv.sh: Likewise.
* debug/pcprofiledump.c: Likewise.
* debug/xtrace.sh: Likewise.
* elf/ldd.bash.in: Likewise.
* iconv/iconv_prog.c: Likewise.
* iconv/iconvconfig.c: Likewise.
* locale/programs/locale.c: Likewise.
* locale/programs/localedef.c: Likewise.
* login/programs/pt_chown.c: Likewise.
* malloc/memusage.sh: Likewise.
* malloc/memusagestat.c: Likewise.
* malloc/mtrace.pl: Likewise.
* manual/crypt.texi: Likewise.
* manual/install.texi: Likewise.
* nss/makedb.c: Likewise.
2004-05-14 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Only
CHECK_STATIC_TLS if sym != NULL.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rela): Likewise.
2004-05-12 Andreas Schwab <schwab@suse.de>
* posix/regex_internal.c (build_wcs_buffer): Also set pstr->mbs
when translating.
2004-05-13 H.J. Lu <hongjiu.lu@intel.com>
* Rules (xtests): Depend on tests.
|
|
Configurations): Add x86_64-*-linux.
|