Age | Commit message (Collapse) | Author | Files | Lines |
|
There is a 1 in 16 chance of a corruption escaping safe-linking and to
guard against spurious failures, tst-safe-linking runs each subtest 10
times to ensure that the chance is reduced to 1 in 2^40. However, in
the 1 in 16 chance that a corruption does escape safe linking, it
could well be caught by other sanity checks we do in malloc, which
then results in spurious test failures like below:
test test_fastbin_consolidate failed with a different error
expected: malloc_consolidate(): unaligned fastbin chunk detected
actual: malloc_consolidate(): invalid chunk size
This failure is seen more frequently on i686; I was able to reproduce
it in about 5 min of running it in a loop.
Guard against such failures by recording them and retrying the test.
Also, do not fail the test if we happened to get defeated by the 1 in
2^40 odds if in at least one of the instances it was detected by other
checks.
Finally, bolster the odds to 2^64 by running 16 times instead of 10.
The test still has a chance of failure so it is still flaky in theory.
However in practice if we see a failure here then it's more likely
that there's a bug than it being an issue with the test. Add more
printfs and also dump them to stdout so that in the event the test
actually fails, we will have some data to try and understand why it
may have failed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
1. Align struct hdr to MALLOC_ALIGNMENT bytes so that malloc hooks in
libmcheck align memory to MALLOC_ALIGNMENT bytes.
2. Remove tst-mallocalign1 from tests-exclude-mcheck for i386 and x32.
3. Add tst-pvalloc-fortify and tst-reallocarray to tests-exclude-mcheck
since they use malloc_usable_size (see BZ #22057).
This fixed BZ #28068.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
1. Add sysdeps/generic/malloc-size.h to define size related macros for
malloc.
2. Move x86_64/tst-mallocalign1.c to malloc and replace ALIGN_MASK with
MALLOC_ALIGN_MASK.
3. Add tst-mallocalign1 to tests-exclude-mcheck for i386 and x32 since
mcheck doesn't honor MALLOC_ALIGNMENT.
|
|
_int_realloc is correctly declared at the top to be static, but
incorrectly defined without the static keyword. Fix that. The
generated binaries have identical code.
|
|
It is defined in malloc, so it belongs there. Verified on x86_64 that
the built libraries are identical despite this change.
|
|
The tcache allocator layer uses the tcache pointer as a key to
identify a block that may be freed twice. Since this is in the
application data area, an attacker exploiting a use-after-free could
potentially get access to the entire tcache structure through this
key. A detailed write-up was provided by Awarau here:
https://awaraucom.wordpress.com/2020/07/19/house-of-io-remastered/
Replace this static pointer use for key checking with one that is
generated at malloc initialization. The first attempt is through
getrandom with a fallback to random_bits(), which is a simple
pseudo-random number generator based on the clock. The fallback ought
to be sufficient since the goal of the randomness is only to make the
key arbitrary enough that it is very unlikely to collide with user
data.
Co-authored-by: Eyal Itkin <eyalit@checkpoint.com>
|
|
It's tst-realloc, not tst-posix-realloc. Verified this time to ensure
that the total number of tests reduced by 1.
Reported-by: Stefan Liebler <stli@linux.ibm.com>
|
|
The realloc (NULL, 0) test in tst-realloc fails with gcc 7.x but
passes with newer gcc. This is because a newer gcc transforms the
realloc call to malloc (0), thus masking the bug in mcheck.
Disable the test with mcheck for now. The malloc removal patchset
will fix this and then remove this test from the exclusion list.
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The comment about different values of glibc.malloc.check is no longer
valid.
|
|
Avoid compilation errors GCC versions that do not default to
-fno-common, e.g. GCC <= 9.
Fixes commit 00d28960c5388a582a0485e07629b553c32dde49 ("mtrace:
Deprecate mallwatch and tr_break").
Suggested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Suggested-by: Florian Weimer <fweimer@redhat.com>
|
|
Separate the malloc check implementation from the malloc hooks. They
still use the hooks but are now maintained in a separate file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The variable and function pair appear to provide a way for users to
set conditional breakpoints in mtrace when a specific address is
returned by the allocator. This can be achieved by using conditional
breakpoints in gdb so it is redundant. There is no documentation of
this interface in the manual either, so it appears to have been a hack
that got added to debug malloc. Deprecate these symbols and do not
call tr_break anymore.
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Dependencies on hooks.c and arena.c get auto-computed when generating
malloc.o{,s}.d so there is no need to add them manually.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
|
|
After commit 1e26d35193efbb29239c710a4c46a64708643320 ("malloc: Fix
tcache leak after thread destruction [BZ #22111]"),
tcache_shutting_down is still not early enough. When we detach a
thread with no tcache allocated, tcache_shutting_down would still be
false.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Like malloc-check, add generic rules to run all tests in malloc by
linking with libmcheck.a so as to provide coverage for mcheck().
Currently the following 12 tests fail:
FAIL: malloc/tst-malloc-backtrace-mcheck
FAIL: malloc/tst-malloc-fork-deadlock-mcheck
FAIL: malloc/tst-malloc-stats-cancellation-mcheck
FAIL: malloc/tst-malloc-tcache-leak-mcheck
FAIL: malloc/tst-malloc-thread-exit-mcheck
FAIL: malloc/tst-malloc-thread-fail-mcheck
FAIL: malloc/tst-malloc-usable-static-mcheck
FAIL: malloc/tst-malloc-usable-static-tunables-mcheck
FAIL: malloc/tst-malloc-usable-tunables-mcheck
FAIL: malloc/tst-malloc_info-mcheck
FAIL: malloc/tst-memalign-mcheck
FAIL: malloc/tst-posix_memalign-mcheck
and they have been added to tests-exclude-mcheck for now to keep
status quo. At least the last two can be attributed to bugs in
mcheck() but I haven't fixed them here since they should be fixed by
removing malloc hooks. Others need to be triaged to check if they're
due to mcheck bugs or due to actual bugs.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Austin Group issue 62 [1] dropped the async-signal-safe requirement
for fork and provided a async-signal-safe _Fork replacement that
does not run the atfork handlers. It will be included in the next
POSIX standard.
It allow to close a long standing issue to make fork AS-safe (BZ#4737).
As indicated on the bug, besides the internal lock for the atfork
handlers itself; there is no guarantee that the handlers itself will
not introduce more AS-safe issues.
The idea is synchronize fork with the required internal locks to allow
children in multithread processes to use mostly of standard function
(even though POSIX states only AS-safe function should be used). On
signal handles, _Fork should be used intead and only AS-safe functions
should be used.
For testing, the new tst-_Fork only check basic usage. I also added
a new tst-mallocfork3 which uses the same strategy to check for
deadlock of tst-mallocfork2 but using threads instead of subprocesses
(and it does deadlock if it replaces _Fork with fork).
[1] https://austingroupbugs.net/view.php?id=62
|
|
Refactored malloc-check rules for tests that are automatically
generated and executed with MALLOC_CHECK_=3.
|
|
__malloc_initialized is mentioned in Versions when it is actually an
internal symbol. The resultant binaries are identical.
|
|
MALLOC_CHECK_ and mcheck() are two different malloc checking features.
tst-mcheck does not check mcheck(), instead it checks MALLOC_CHECK_,
so rename the file to avoid confusion.
|
|
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
"accomodate" should be "accommodate"
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Since test uses 160 multiple for malloc size, we should also use 160 multiple
for total variable instead of 16, then comparison is meaningful. So fix it.
Also change the ">" to ">=" so that the test is technically valid.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
When MALLOC_CHECK_ is non-zero, the realloc hook missed to set errno to
ENOMEM when called with too big size. Run the test tst-malloc-too-large
also with MALLOC_CHECK_=3 to catch that.
|
|
To help detect common kinds of memory (and other resource) management
bugs, GCC 11 adds support for the detection of mismatched calls to
allocation and deallocation functions. At each call site to a known
deallocation function GCC checks the set of allocation functions
the former can be paired with and, if the two don't match, issues
a -Wmismatched-dealloc warning (something similar happens in C++
for mismatched calls to new and delete). GCC also uses the same
mechanism to detect attempts to deallocate objects not allocated
by any allocation function (or pointers past the first byte into
allocated objects) by -Wfree-nonheap-object.
This support is enabled for built-in functions like malloc and free.
To extend it beyond those, GCC extends attribute malloc to designate
a deallocation function to which pointers returned from the allocation
function may be passed to deallocate the allocated objects. Another,
optional argument designates the positional argument to which
the pointer must be passed.
This change is the first step in enabling this extended support for
Glibc.
|
|
/bin/bash instead
(FYI, this is a repost of
https://sourceware.org/pipermail/libc-alpha/2019-July/105035.html now
that FSF papers have been signed and confirmed on FSF side).
This trivial patch attemps to fix BZ 24106. Basically the bash locally
used when building glibc on the host shall not leak on the installed
glibc, as the system where it is installed might be different and use
another bash location.
So I have looked for all occurences of @BASH@ or $(BASH) in installed
files, and replaced it by /bin/bash. This was suggested by Florian
Weimer in the bug report.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This replaces the FREE_P macro with the __nptl_stack_in_use inline
function. stack_list_del is renamed to __nptl_stack_list_del,
stack_list_add to __nptl_stack_list_add, __deallocate_stack to
__nptl_deallocate_stack, free_stacks to __nptl_free_stacks.
It is convenient to move __libpthread_freeres into libc at the
same time. This removes the temporary __default_pthread_attr_freeres
export and restores full freeres coverage for __default_pthread_attr.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Since malloc tunable callback functions are only used within the same
file, we should make them static.
|
|
Calling free directly may end up freeing a pointer allocated by the
dynamic loader using malloc from libc.so in the base namespace using
the allocator from libc.so in a secondary namespace, which results in
crashes.
This commit redirects the free call through GLRO and the dynamic
linker, to reach the correct namespace. It also cleans up the dlerror
handling along the way, so that pthread_setspecific is no longer
needed (which avoids triggering bug 24774).
|
|
* malloc/malloc.c (REALLOC_ZERO_BYTES_FREES): Improve comment further.
|
|
* malloc/malloc.c (REALLOC_ZERO_BYTES_FREES):
Update comment to match current C standard.
|
|
This allows the test to time out in case it hangs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
This is a workaround (hack) for a gcc optimization issue (PR 99551).
Without this the generated code may evaluate the expression in the
cold path which causes performance regression for small allocations
in the memory tagging disabled (common) case.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The internal _mid_memalign already returns newly tagged memory.
(__libc_memalign and posix_memalign already relied on this, this
patch fixes the other call sites.)
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The previous patch ensured that all chunk to mem computations use
chunk2rawmem, so now we can rename it to chunk2mem, and in the few
cases where the tag of mem is relevant chunk2mem_tag can be used.
Replaced tag_at (chunk2rawmem (x)) with chunk2mem_tag (x).
Renamed chunk2rawmem to chunk2mem.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The difference between chunk2mem and chunk2rawmem is that the latter
does not get the memory tag for the returned pointer. It turns out
chunk2rawmem almost always works:
The input of chunk2mem is a chunk pointer that is untagged so it can
access the chunk header. All memory that is not user allocated heap
memory is untagged, which in the current implementation means that it
has the 0 tag, but this patch does not rely on the tag value. The
patch relies on that chunk operations are either done on untagged
chunks or without doing memory access to the user owned part.
Internal interface contracts:
sysmalloc: Returns untagged memory.
_int_malloc: Returns untagged memory.
_int_free: Takes untagged memory.
_int_memalign: Returns untagged memory.
_int_realloc: Takes and returns tagged memory.
So only _int_realloc and functions outside this list need care.
Alignment checks do not need the right tag and tcache works with
untagged memory.
tag_at was kept in realloc after an mremap, which is not strictly
necessary, since the pointer is only used to retag the memory, but this
way the tag is guaranteed to be different from the old tag.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The comment explained why different tag is used after mremap, but
for that correctly tagged pointer should be passed to tag_new_usable.
Use chunk2mem to get the tag.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
This is a pure refactoring change that does not affect behaviour.
The CHUNK_AVAILABLE_SIZE name was unclear, the memsize name tries to
follow the existing convention of mem denoting the allocation that is
handed out to the user, while chunk is its internally used container.
The user owned memory for a given chunk starts at chunk2mem(p) and
the size is memsize(p). It is not valid to use on dumped heap chunks.
Moved the definition next to other chunk and mem related macros.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Use the runtime check where possible: it should not cause slow down in
the !USE_MTAG case since then mtag_enabled is constant false, but it
allows compiling the tagging logic so it's less likely to break or
diverge when developers only test the !USE_MTAG case.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The branches may be better optimized since mtag_enabled is widely used.
Granule size larger than a chunk header is not supported since then we
cannot have both the chunk header and user area granule aligned. To
fix that for targets with large granule, the chunk layout has to change.
So code that attempted to handle the granule mask generally was changed.
This simplified CHUNK_AVAILABLE_SIZE and the logic in malloc_usable_size.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
When glibc is built with memory tagging support (USE_MTAG) but it is not
enabled at runtime (mtag_enabled) then unconditional memset was used
even though that can be often avoided.
This is for performance when tagging is supported but not enabled.
The extra check should have no overhead: tag_new_zero_region already
had a runtime check which the compiler can now optimize away.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The memset api is suboptimal and does not provide much benefit. Memory
tagging only needs a zeroing memset (and only for memory that's sized
and aligned to multiples of the tag granule), so change the internal
api and the target hooks accordingly. This is to simplify the
implementation of the target hook.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
A flag check can be faster than function pointers because of how
branch prediction and speculation works and it can also remove a layer
of indirection when there is a mismatch between the malloc internal
tag_* api and __libc_mtag_* target hooks.
Memory tagging wrapper functions are moved to malloc.c from arena.c and
the logic now checks mmap_enabled. The definition of tag_new_usable is
moved after chunk related definitions.
This refactoring also allows using mtag_enabled checks instead of
USE_MTAG ifdefs when memory tagging support only changes code logic
when memory tagging is enabled at runtime. Note: an "if (false)" code
block is optimized away even at -O0 by gcc.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
This does not change behaviour, just removes one layer of indirection
in the internal memory tagging logic.
Use tag_ and mtag_ prefixes instead of __tag_ and __mtag_ since these
are all symbols with internal linkage, private to malloc.c, so there
is no user namespace pollution issue.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Either the memory belongs to the dumped area, in which case we don't
want to tag (the dumped area has the same tag as malloc internal data
so tagging is unnecessary, but chunks there may not have the right
alignment for the tag granule), or the memory will be unmapped
immediately (and thus tagging is not useful).
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The chunk cannot be a dumped one here. The only non-obvious cases
are free and realloc which may be called on a dumped area chunk,
but in both cases it can be verified that tagging is already
avoided for dumped area chunks.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
This is only used internally in malloc.c, the extern declaration
was wrong, __mtag_mmap_flags has internal linkage.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
At an _int_free call site in realloc the wrong size was used for tag
clearing: the chunk header of the next chunk was also cleared which
in practice may work, but logically wrong.
The tag clearing is moved before the memcpy to save a tag computation,
this avoids a chunk2mem. Another chunk2mem is removed because newmem
does not have to be recomputed. Whitespaces got fixed too.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
_int_free must be called with a chunk that has its tag reset. This was
missing in a rare case that could crash when heap tagging is enabled:
when in a multi-threaded process the current arena runs out of memory
during realloc, but another arena still has space to finish the realloc
then _int_free was called without clearing the user allocation tags.
Fixes bug 27468.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
This essentially folds compat_symbol_unique functionality into
compat_symbol.
This change eliminates the need for intermediate aliases for defining
multiple symbol versions, for both compat_symbol and versioned_symbol.
Some binutils versions do not suport multiple versions per symbol on
some targets, so aliases are automatically introduced, similar to what
compat_symbol_unique did. To reduce symbol table sizes, a configure
check is added to avoid these aliases if they are not needed.
The new mechanism works with data symbols as well as function symbols,
due to the way an assembler-level redirect is used. It is not
compatible with weak symbols for old binutils versions, which is why
the definition of __malloc_initialize_hook had to be changed. This
is not a loss of functionality because weak symbols do not matter
to dynamic linking.
The placeholder symbol needs repeating in nptl/libpthread-compat.c
now that compat_symbol is used, but that seems more obvious than
introducing yet another macro.
A subtle difference was that compat_symbol_unique made the symbol
global automatically. compat_symbol does not do this, so static
had to be removed from the definition of
__libpthread_version_placeholder.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|