aboutsummaryrefslogtreecommitdiff
path: root/hurd
AgeCommit message (Collapse)AuthorFilesLines
2021-03-23hurd: handle EINTR during critical sectionsSamuel Thibault7-2/+37
During critical sections, signal handling is deferred and thus RPCs return EINTR, even if SA_RESTART is set. We thus have to restart the whole critical section in that case. This also adds HURD_CRITICAL_UNLOCK in the cases where one wants to break the section in the middle.
2021-01-02Update copyright dates with scripts/update-copyrightsPaul Eggert88-88/+88
I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
2020-12-26hurd: set sigaction for signal preemptors in arch-independent fileSamuel Thibault2-7/+18
Instead of having the arch-specific trampoline setup code detect whether preemption happened or not, we'd rather pass it the sigaction. In the future, this may also allow to change sa_flags from post_signal().
2020-12-21Hurd: make sigstates hold a reference on thread portsRichard Braun2-7/+29
This change is required in order to correctly release per-thread resources. Directly reusing the threading library reference isn't possible since the sigstate is also used early in the main thread, before threading is initialized. * hurd/hurd/signal.h (_hurd_self_sigstate): Drop thread reference after calling _hurd_thread_sigstate. (_hurd_critical_section_lock): Likewise. * hurd/hurdsig.c (_hurd_thread_sigstate): Add a reference on the thread. (_hurd_sigstate_delete): Drop thread reference.
2020-12-21hurd: implement SA_SIGINFO signal handlers.Jeremie Koenig4-5/+10
SA_SIGINFO is actually just another way of expressing what we were already passing over with struct sigcontext. This just introduces the SIGINFO interface and fixes the posix values when that interface is requested by the application.
2020-12-19hurd: Also turn KERN_INVALID_ADDRESS to EINVALSamuel Thibault1-0/+1
When e.g. mmap is passed an invalid address we would return KERN_INVALID_ADDRESS, while POSIX applications would expect EINVAL.
2020-12-16hurd: Add __libc_open and __libc_closeSamuel Thibault1-0/+1
Needed by libpthread for sem_open and sem_close
2020-12-16hurd: Add __lll_abstimed_wait_intrSamuel Thibault5-1/+33
For semaphores, we need an interruptible version of low-level locks.
2020-12-16hurd: make lll_* take a variable instead of a ptrSamuel Thibault3-24/+30
To be coherent with other ports, let's make lll_* take a variable, and rename those that keep taking a ptr into __lll_*.
2020-12-16hurd: Rename LLL_INITIALIZER to LLL_LOCK_INITIALIZERSamuel Thibault1-1/+1
To get coherent with other ports.
2020-12-03htl: Add missing symbolsSamuel Thibault1-1/+1
hurd/hurdsig.c needs to detect whether __pthread_detach and __pthread_create are available, so they need to be exposed.
2020-11-23hurd report-wait: Fix stpcpy usageSamuel Thibault1-29/+49
We shall not overflow the size of the description parameter. This makes describe_number and describe_port behave like strpcpy (except for not filling all the end of buffer with zeroes) and _S_msg_report_wait use series of stpncpy-like call. If we were to overflow, we can now detect it and return ENOMEM.
2020-11-23hurd S_msg_report_wait: Fix detecting fd portsSamuel Thibault1-1/+1
_hurd_init_dtable stays set to non-NULL, so we have to run through both _hurd_init_dtable and _hurd_dtable.
2020-11-23hurd S_msg_report_wait: Fix reporting portsSamuel Thibault1-1/+1
This fixes the parameter order of MSG_EXAMINE, thus fixing the detection of e.g. fd ports for nicer output in ps WAIT output.
2020-11-22hurd: Fix strcpy callsSamuel Thibault1-3/+4
strcpy cannot be used with overlapping buffer, we have to use memmove instead. strcpy also cannot be safely used when the destination buffer is smaller that the source, we need to use strncpy to truncate the source if needed.
2020-11-22hurd: Fix _S_msg_get/set_env_variable prototypeSamuel Thibault1-3/+3
_S_msg_get_env_variable and _S_msg_set_env_variable are taking string_t, not char *. Fixes a warning with gcc 11.
2020-11-15hurd: Remove some remnants of cthreadsSamuel Thibault12-61/+44
Libc has actually been using mach's lock-internal.h mutex for a long time already.
2020-11-13hurd: initialize libpthread before starting the signal threadSamuel Thibault1-0/+6
We cannot rely on csu calling __pthread_initialize_minimal before posixland_init, in some cases _init gets called before that.
2020-11-13hurd: Make _hurd_libc_proc_init idempotentSamuel Thibault1-11/+19
For the cases where _init is getting called several times during startup. Better clean pointers anyway.
2020-11-11hurd: Notify the proc server later during initializationSamuel Thibault1-11/+25
Notifying the proc server is an involved task, and unleashes various signal handling etc. so we have to do this after e.g. ifunc relocations are completed.
2020-11-11htl: Initialize laterSamuel Thibault1-3/+0
Since htl does not actually need a stack switch, we can initialize it like nptl is, avoiding all sorts of startup issues with ifunc. More precisely, htl defines __pthread_initialize_minimal instead of the elder _cthread_init_routine. We can then drop the stack switching dances.
2020-08-05hurd: Rework sbrkSamuel Thibault1-3/+0
Making the brk start exactly at the end of the main application binary was requiring to get it through the _end symbol, which does not work any more with recent toolchains, and actually produces in libc.so a confusing external _end symbol that produces odd results, see https://sourceware.org/bugzilla/show_bug.cgi?id=23499 Trying to do so is quite outdated anyway with the tendency for address randomization. Using _end was also allowing to include the main binary data within the RLIMIT_DATA, but this also seems outdated with dynamic library loading, and nowadays' memory consumption via malloc and mmap rather than statically-allocated data. This adds a BRK_START macro in <vm_param.h> that just tells where we want to start the brk, and thus removes the _end symbol. * sysdeps/mach/hurd/i386/vm_param.h: New file. * sysdeps/mach/hurd/brk.c: Use BRK_START as brk start instead of _end. Also ignore __data_start. * hurd/Versions: Remove _end symbol. * sysdeps/mach/hurd/i386/libc.abilist: Remove _end symbol.
2020-06-28hurd: Add remaining cancelation pointsSamuel Thibault1-0/+5
* hurd/hurdselect.c: Include <sysdep-cancel.h>. (_hurd_select): Surround call to __mach_msg with enabling async cancel. * sysdeps/mach/hurd/accept4.c: Include <sysdep-cancel.h>. (__libc_accept4): Surround call to __socket_accept with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE. * sysdeps/mach/hurd/connect.c: Include <sysdep-cancel.h>. (__connect): Surround call to __file_name_lookup and __socket_connect with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE. * sysdeps/mach/hurd/fdatasync.c: Include <sysdep-cancel.h>. (fdatasync): Surround call to __file_sync with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE. * sysdeps/mach/hurd/fsync.c: Include <sysdep-cancel.h>. (fsync): Surround call to __file_sync with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE. * sysdeps/mach/hurd/ioctl.c: Include <sysdep-cancel.h>. (__ioctl): When request is TIOCDRAIN, surround call to send_rpc with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE. * sysdeps/mach/hurd/msync.c: Include <sysdep-cancel.h>. (msync): Surround call to __vm_object_sync with enabling async cancel. * sysdeps/mach/hurd/sigsuspend.c: Include <sysdep-cancel.h>. (__sigsuspend): Surround call to __mach_msg with enabling async cancel. * sysdeps/mach/hurd/sigwait.c: Include <sysdep-cancel.h>. (__sigwait): Surround wait code with enabling async cancel. * sysdeps/mach/msync.c: Include <sysdep-cancel.h>. (msync): Surround call to __vm_msync with enabling async cancel. * sysdeps/mach/sleep.c: Include <sysdep-cancel.h>. (__sleep): Surround call to __mach_msg with enabling async cancel. * sysdeps/mach/usleep.c: Include <sysdep-cancel.h>. (usleep): Surround call to __vm_msync with enabling async cancel.
2020-06-28hurd: clean fd and port on thread cancelSamuel Thibault8-4/+52
HURD_*PORT_USE link fd and port with a stack-stored structure, so on thread cancel we need to cleanup this. * hurd/fd-cleanup.c: New file. * hurd/port-cleanup.c (_hurd_port_use_cleanup): New function. * hurd/Makefile (routines): Add fd-cleanup. * sysdeps/hurd/include/hurd.h (__USEPORT_CANCEL): New macro. * sysdeps/hurd/include/hurd/fd.h (_hurd_fd_port_use_data): New structure. (_hurd_fd_port_use_cleanup): New prototype. (HURD_DPORT_USE_CANCEL, HURD_FD_PORT_USE_CANCEL): New macros. * sysdeps/hurd/include/hurd/port.h (_hurd_port_use_data): New structure. (_hurd_port_use_cleanup): New prototype. (HURD_PORT_USE_CANCEL): New macro. * hurd/hurd/fd.h (HURD_FD_PORT_USE): Also refer to HURD_FD_PORT_USE_CANCEL. * hurd/hurd.h (__USEPORT): Also refer to __USEPORT_CANCEL. * hurd/hurd/port.h (HURD_PORT_USE): Also refer to HURD_PORT_USE_CANCEL. * hurd/fd-read.c (_hurd_fd_read): Call HURD_FD_PORT_USE_CANCEL instead of HURD_FD_PORT_USE. * hurd/fd-write.c (_hurd_fd_write): Likewise. * sysdeps/mach/hurd/send.c (__send): Call HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE. * sysdeps/mach/hurd/sendmsg.c (__libc_sendmsg): Likewise. * sysdeps/mach/hurd/sendto.c (__sendto): Likewise. * sysdeps/mach/hurd/recv.c (__recv): Likewise. * sysdeps/mach/hurd/recvfrom.c (__recvfrom): Likewise. * sysdeps/mach/hurd/recvmsg.c (__libc_recvmsg): Call __USEPORT_CANCEL instead of __USEPORT, and HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
2020-06-07hurd: Fix hang in _hurd_raise_signal from pthread_killSamuel Thibault1-1/+5
When ss is not NULL, it is assumed to be locked. * hurd/hurd-raise.c (_hurd_raise_signal): Unlock before returning an error if ss is not NULL.
2020-06-07hurd: Reject raising invalid signalsSamuel Thibault1-0/+3
* hurd/hurd-raise.c (_hurd_raise_signal): Return EINVAL if signo <= 0 or signo >= NSI.
2020-05-28Hurd: Move <hurd/sigpreempt.h> internals into wrapper headerFlorian Weimer1-10/+0
_hurdsig_preemptors and _hurdsig_preempted_set are not ABI symbols, so do not declare them. HURD_PREEMPT_SIGNAL_P is an implementation detail, so move it as well. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2020-05-28Hurd: Use __sigmask in favor of deprecated sigmaskFlorian Weimer4-9/+9
This fixes various build errors due to deprecation warnings. Fixes commit 02802fafcf6e11ea3f998f685035ffe568dfddeb ("signal: Deprecate additional legacy signal handling functions"). Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2020-05-28hurd: Fix pselect atomicitySamuel Thibault2-10/+70
In case the signal arrives before the __mach_msg call, we need to catch between the sigprocmask call and the __mach_msg call. Let's just reuse the support for sigsuspend to make the signal send a message that our __mach_msg call will just receive. * hurd/hurdselect.c (_hurd_select): Add sigport and ss variables. When sigmask is not NULL, create a sigport port and register as ss->suspended. Add it to the portset. When we receive a message on it, set error to EINTR. Clean up sigport and portset appropriately. * hurd/hurdsig.c (wake_sigsuspend): Note that pselect also uses it.
2020-05-26htl: Add clock variantsSamuel Thibault1-0/+12
* htl/pt-join.c (__pthread_join): Move implementation to... (__pthread_join_common): ... new function. Add try, timed and clock support. (__pthread_join): Reimplement on top of __pthread_join_common. (__pthread_tryjoin_np, __pthread_timedjoin_np, __pthread_clockjoin_np): Implement on top of __pthread_join_common. (pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np): New aliases. * hurd/hurdlock.c (__lll_abstimed_wait, __lll_abstimed_xwait, __lll_abstimed_lock): Check for supported clock. * sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal): Add clockid parameter and support it. (__pthread_cond_timedwait): Pass -1 as clockid. (__pthread_cond_clockwait): New function. (pthread_cond_clockwait): New alias. * sysdeps/htl/pt-cond-wait.c (__pthread_cond_timedwait_internal): Update prototype. (__pthread_cond_wait): Pass -1 as clockid. * sysdeps/htl/pt-rwlock-timedrdlock.c (__pthread_rwlock_timedrdlock_internal): Add clockid parameter, and support id. (__pthread_rwlock_clockrdlock): New function. (pthread_rwlock_clockrdlock): New alias. * sysdeps/htl/pt-rwlock-rdlock.c (__pthread_rwlock_timedrdlock_internal): Update prototype. (__pthread_rwlock_rdlock): Pass -1 as clockid. * sysdeps/htl/pt-rwlock-timedwrlock.c (__pthread_rwlock_timedwrlock_internal): Add clockid parameter, and support id. (__pthread_rwlock_clockwrlock): New function. (pthread_rwlock_clockwrlock): New alias. * sysdeps/htl/pt-rwlock-wrlock.c (__pthread_rwlock_timedwrlock_internal): Update prototype. (__pthread_rwlock_wrlock): Pass -1 as clockid. * sysdeps/mach/hurd/htl/pt-mutex-timedlock.c (__pthread_mutex_timedlock): Move implementation to (__pthread_mutex_clocklock): New function with additional clockid parameter and support it. (pthread_mutex_clocklock): New alias. (__pthread_mutex_timedlock): Reimplement on top of __pthread_mutex_clocklock. * sysdeps/htl/pthread.h (pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np, pthread_mutex_clocklock, pthread_cond_clockwait, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock): New prototypes. * sysdeps/htl/pthreadP.h (__pthread_cond_clockwait): New prototype. * htl/Versions (GLIBC_2.32): Add pthread_cond_clockwait, pthread_mutex_clocklock, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock, pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np. * sysdeps/mach/hurd/i386/libpthread.abilist (pthread_clockjoin_np, pthread_cond_clockwait, pthread_mutex_clocklock, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock, pthread_timedjoin_np, pthread_tryjoin_np): New functions. * nptl/tst-abstime.c, nptl/tst-join10.c, nptl/tst-join11.c, nptl/tst-join12.c, nptl/tst-join13.c, nptl/tst-join14.c, nptl/tst-join2.c, nptl/tst-join3.c, nptl/tst-join8.c, nptl/tst-join9.c, nptl/tst-mutex-errorcheck.c, nptl/tst-pthread-mutexattr.c, nptl/tst-mutex11.c, nptl/tst-mutex5.c, nptl/tst-mutex7.c, nptl/tst-mutex7robus.c, nptl/tst-mutex9.c, nptl/tst-rwlock12.c, nptl/tst-rwlock14.c: Move to sysdeps/pthread. * sysdeps/pthread/tst-mutex8.c: Move back to nptl. * nptl/Makefile (tests): Move tst-mutex5, tst-mutex7, tst-mutex7robust, tst-mutex9, tst-mutex11, tst-rwlock12, tst-rwlock14, tst-join2, tst-join3, tst-join8, tst-join9 tst-join10, tst-join11, tst-join12, tst-join13, tst-join14, tst-abstime, tst-mutex-errorcheck, tst-pthread-mutexattr to ... * sysdeps/pthread/Makefile (tests): ... here.
2020-05-11hurd: Add missing sigstate members initializationSamuel Thibault1-1/+5
* hurd/hurdsig.c (_hurd_thread_sigstate): Initialize critical_section_lock, active_resources, cancel, and cancel_hook fields.
2020-03-29hurd: Make O_TRUNC update mtime/ctimeSamuel Thibault1-2/+11
* hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Call __file_utimens after __file_set_size.
2020-02-15hurd: Add THREAD_GET/SETMEM/_NCSamuel Thibault1-5/+6
Store them in the TCB, and use them for accessing _hurd_sigstate.
2020-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers87-87/+87
2019-12-29hurd: Global signal dispositionJeremie Koenig7-108/+282
This adds _hurd_sigstate_set_global_rcv used by libpthread to enable POSIX-confirming behavior of signals on a per-thread basis. This also provides a sigstate destructor _hurd_sigstate_delete, and a global process signal state, which needs to be locked and check when global disposition is enabled, thus the addition of _hurd_sigstate_lock _hurd_sigstate_actions _hurd_sigstate_pending _hurd_sigstate_unlock helpers. This also updates all the glibc code accordingly. This also drops support for get_int(INIT_SIGMASK), which did not make sense any more since we do not have a single signal thread any more. During fork/spawn, this also reinitializes the child global sigstate's lock. That cures an issue that would very rarely cause a deadlock in the child in fork, tries to unlock ss' critical section lock at the end of fork. This will typically (always?) be observed in /bin/sh, which is not surprising as that is the foremost caller of fork. To reproduce an intermediate state, add an endless loop if _hurd_global_sigstate is locked after __proc_dostop (cast through volatile); that is, while still being in the fork's parent process. When that triggers (use the libtool testsuite), the signal thread has already locked ss (which is _hurd_global_sigstate), and is stuck at hurdsig.c:685 in post_signal, trying to lock _hurd_siglock (which the main thread already has locked and keeps locked until after __task_create). This is the case that ss->thread == MACH_PORT_NULL, that is, a global signal. In the main thread, between __proc_dostop and __task_create is the __thread_abort call on the signal thread which would abort any current kernel operation (but leave ss locked). Later in fork, in the parent, when _hurd_siglock is unlocked in fork, the parent's signal thread can proceed and will unlock eventually the global sigstate. In the client, _hurd_siglock will likewise be unlocked, but the global sigstate never will be, as the client's signal thread has been configured to restart execution from _hurd_msgport_receive. Thus, when the child tries to unlock ss' critical section lock at the end of fork, it will first lock the global sigstate, will spin trying to lock it, which can never be successful, and we get our deadlock. Options seem to be: * Move the locking of _hurd_siglock earlier in post_signal -- but that may generally impact performance, if this locking isn't generally needed anyway? On the other hand, would it actually make sense to wait here until we are not any longer in a critical section (which is meant to disable signal delivery anyway (but not for preempted signals?))? * Clear the global sigstate in the fork's child with the rationale that we're anyway restarting the signal thread from a clean state. This has now been implemented. Why has this problem not been observed before Jérémie's patches? (Or has it? Perhaps even more rarely?) In _S_msg_sig_post, the signal is now posted to a *global receiver thread*, whereas previously it was posted to the *designated signal-receiving thread*. The latter one was in a critical section in fork, so didn't try to handle the signal until after leaving the critical section? (Not completely analyzed and verified.) Another question is what the signal is that is being received during/around the time __proc_dostop executes.
2019-12-29hurd: Signal code refactoringJeremie Koenig1-112/+160
This should not change the current behavior, although this fixes a few minor bugs which were made apparent in the process of global signal disposition work: - Split into more functions - Scope variables more restrictively - Split out inner functions - refactor check_pending_signals - make sigsuspend POSIX-conformant. - fix uninitialized act value.
2019-11-07hurd: Use __clock_gettime in _hurd_selectFlorian Weimer1-7/+4
The __gettimeofday references caused check-localplt failures after commit 5e46749c64d5. Fixes: 5e46749c64d51f50f8511ed99c1266d7c13e182b Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Change-Id: Ia6da4045157a5bbccc67d79e881d7592e6f8a890
2019-10-27time: Introduce function to check correctness of nanoseconds valueLukasz Majewski2-3/+3
The valid_nanoseconds () static inline function has been introduced to check if nanoseconds value is in the correct range - greater or equal to zero and less than 1000000000. The explicit #include <time.h> has been added to files where it was missing. The __syscall_slong_t type for ns has been used to avoid issues on x32. Tested with: - scripts/build-many-glibcs.py - make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert86-86/+86
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-08-30hurd: Fix poll and select POSIX compliancy details about errorsSamuel Thibault1-41/+108
This fixes the following: - On error, poll must not return without polling, including EBADF, and instead report POLLHUP/POLLERR/POLLNVAL - Select must report EBADF if some set contains an invalid FD. The idea is to move error management to after all select calls, in the poll/select final treatment. The error is instead recorded in a new `error' field, and a new SELECT_ERROR bit set. Thanks Svante Signell for the initial version of the patch. * hurd/hurdselect.c (SELECT_ERROR): New macro. (_hurd_select): - Add `error' field to `d' structures array. - If a poll descriptor is bogus, set EBADF, but continue with a zero timeout. - Go through the whole fd_set, not only until _hurd_dtablesize. Return EBADF there is any bit set above _hurd_dtablesize. - Do not request io_select on bogus descriptors (SELECT_ERROR). - On io_select request error, record the error. - On io_select bogus reply, use EIO error code. - On io_select bogus or error reply, record the error. - Do not destroy reply port for bogus FDs. - On error, make poll set POLLHUP in the EPIPE case, POLLNVAL in the EBADF case, or else POLLERR. - On error, make select simulated readiness.
2019-08-30hurd: Fix timeout handling in _hurd_selectRichard Braun2-40/+79
Rely on servers to implement timeouts, so that very short values (including 0) don't make mach_msg return before valid replies can be received. The purpose of this scheme is to guarantee a full client-server round-trip, whatever the timeout value. This change depends on the new io_select_timeout RPC being implemented by servers. * hurd/Makefile (user-interfaces): Add io_reply and io_request. * hurd/hurdselect.c: Include <sys/time.h>, <hurd/io_request.h> and <limits.h>. (_hurd_select): Replace the call to __io_select with either __io_select_request or __io_select_timeout_request, depending on the timeout. Count the number of ready descriptors (replies for which at least one type bit is set). Implement the timeout locally when there is no file descriptor.
2019-08-30hurd: Fix _hurd_select for single fd setsRichard Braun1-4/+1
The function attempts to optimize this case by performing one IPC system call with the timeout included among the parameters, but in the absence of a reply, it will call mach_msg again with the same timeout later, effectively doubling the total timeout of the select/poll call. Remove this optimization for the time being. * hurd/hurdselect.c (_hurd_select): Always call __io_select with no timeout.
2019-03-16hurd: Fix comment styleSamuel Thibault1-2/+1
2019-03-16hurd: Document how EINTR should be handled in critical sectionsSamuel Thibault1-1/+7
* hurd/hurd/signal.h (_hurd_critical_section_lock): Document how EINTR should be handled.
2019-02-27Fix -Wempty-body warnings in Hurd-specific code.Joseph Myers1-4/+6
This patch fixes -Wempty-body warnings in Hurd-specific code that show up building glibc with -Wextra. Note: there also such warnings on many platforms arising from the default definition of HP_TIMING_NOW in sysdeps/generic/hp-timing.h, but no change there is proposed in this patch because of other changes under discussion in that area that would result in a nonempty definition. Tested with build-many-glibcs.py. * hurd/hurdinit.c (_hurd_init): Use braces around empty body of an if statement.
2019-02-25Break more lines before not after operators.Joseph Myers7-32/+33
This patch makes further coding style fixes where code was breaking lines after an operator, contrary to the GNU Coding Standards. As with the previous patch, it is limited to files following a reasonable approximation to GNU style already, and is not exhaustive; more such issues remain to be fixed. Tested for x86_64, and with build-many-glibcs.py. * dirent/dirent.h [!_DIRENT_HAVE_D_NAMLEN && _DIRENT_HAVE_D_RECLEN] (_D_ALLOC_NAMLEN): Break lines before rather than after operators. * elf/cache.c (print_cache): Likewise. * gshadow/fgetsgent_r.c (__fgetsgent_r): Likewise. * htl/pt-getattr.c (__pthread_getattr_np): Likewise. * hurd/hurdinit.c (_hurd_setproc): Likewise. * hurd/hurdkill.c (_hurd_sig_post): Likewise. * hurd/hurdlookup.c (__file_name_lookup_under): Likewise. * hurd/hurdsig.c (_hurd_internal_post_signal): Likewise. (reauth_proc): Likewise. * hurd/lookup-at.c (__file_name_lookup_at): Likewise. (__file_name_split_at): Likewise. (__directory_name_split_at): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/port2fd.c (_hurd_port2fd): Likewise. * iconv/gconv_dl.c (do_print): Likewise. * inet/netinet/in.h (struct sockaddr_in): Likewise. * libio/wstrops.c (_IO_wstr_seekoff): Likewise. * locale/setlocale.c (new_composite_name): Likewise. * malloc/memusagestat.c (main): Likewise. * misc/fstab.c (fstab_convert): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt): Likewise. * nss/nss_compat/compat-grp.c (getgrent_next_nss): Likewise. (getgrent_next_file): Likewise. (internal_getgrnam_r): Likewise. (internal_getgrgid_r): Likewise. * nss/nss_compat/compat-initgroups.c (getgrent_next_nss): Likewise. (internal_getgrent_r): Likewise. * nss/nss_compat/compat-pwd.c (getpwent_next_nss_netgr): Likewise. (getpwent_next_nss): Likewise. (getpwent_next_file): Likewise. (internal_getpwnam_r): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (getspent_next_nss_netgr): Likewise. (getspent_next_nss): Likewise. (internal_getspnam_r): Likewise. * pwd/fgetpwent_r.c (__fgetpwent_r): Likewise. * shadow/fgetspent_r.c (__fgetspent_r): Likewise. * string/strchr.c (STRCHR): Likewise. * string/strchrnul.c (STRCHRNUL): Likewise. * sysdeps/aarch64/fpu/fpu_control.h (_FPU_FPCR_IEEE): Likewise. * sysdeps/aarch64/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/csky/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/generic/memcopy.h (PAGE_COPY_FWD_MAYBE): Likewise. * sysdeps/generic/symbol-hacks.h (__stack_chk_fail_local): Likewise. * sysdeps/gnu/netinet/ip_icmp.h (ICMP_INFOTYPE): Likewise. * sysdeps/gnu/updwtmp.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/gnu/utmp_file.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/hppa/jmpbuf-unwind.h (_JMPBUF_UNWINDS): Likewise. * sysdeps/mach/hurd/bits/stat.h (S_ISPARE): Likewise. * sysdeps/mach/hurd/dl-sysdep.c (_dl_sysdep_start): Likewise. (open_file): Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setprotocol.c (pthread_mutexattr_setprotocol): Likewise. * sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise. * sysdeps/mach/hurd/mmap.c (__mmap): Likewise. * sysdeps/mach/hurd/ptrace.c (ptrace): Likewise. * sysdeps/mach/hurd/spawni.c (__spawni): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_type_class): Likewise. (elf_machine_rela): Likewise. * sysdeps/mips/mips32/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/mips/mips64/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/mips/sys/asm.h (multiple #if conditionals): Likewise. * sysdeps/posix/rename.c (rename): Likewise. * sysdeps/powerpc/novmx-sigjmp.c (__novmx__sigjmp_save): Likewise. * sysdeps/powerpc/sigjmp.c (__vmx__sigjmp_save): Likewise. * sysdeps/s390/fpu/fenv_libc.h (FPC_VALID_MASK): Likewise. * sysdeps/s390/utf8-utf16-z9.c (gconv_end): Likewise. * sysdeps/unix/grantpt.c (grantpt): Likewise. * sysdeps/unix/sysv/linux/a.out.h (N_TXTOFF): Likewise. * sysdeps/unix/sysv/linux/updwtmp.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/unix/sysv/linux/utmp_file.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/x86/cpu-features.c (get_common_indices): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
2019-02-22Break some lines before not after operators.Joseph Myers15-79/+79
The GNU Coding Standards specify that line breaks in expressions should go before an operator, not after one. This patch fixes various code to do this. It only changes code that appears to be mostly following GNU style anyway, not files and directories with substantially different formatting. It is not exhaustive even for files using GNU style (for example, changes to sysdeps files are deferred for subsequent cleanups). Some files changed are shared with gnulib, but most are specific to glibc. Changes were made manually, with places to change found by grep (so some cases, e.g. where the operator was followed by a comment at end of line, are particularly liable to have been missed by grep, but I did include cases where the operator was followed by backslash-newline). This patch generally does not attempt to address other coding style issues in the expressions changed (for example, missing spaces before '(', or lack of parentheses to ensure indentation of continuation lines properly reflects operator precedence). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-memmem.c (simple_memmem): Break lines before rather than after operators. * benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise. * crypt/md5.c (md5_finish_ctx): Likewise. * crypt/sha256.c (__sha256_finish_ctx): Likewise. * crypt/sha512.c (__sha512_finish_ctx): Likewise. * elf/cache.c (load_aux_cache): Likewise. * elf/dl-load.c (open_verify): Likewise. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * elf/readelflib.c (process_elf_file): Likewise. * elf/rtld.c (dl_main): Likewise. * elf/sprof.c (generate_call_graph): Likewise. * hurd/ctty-input.c (_hurd_ctty_input): Likewise. * hurd/ctty-output.c (_hurd_ctty_output): Likewise. * hurd/dtable.c (reauth_dtable): Likewise. * hurd/getdport.c (__getdport): Likewise. * hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise. * hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise. * hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise): Likewise. * hurd/hurdioctl.c (fioctl): Likewise. * hurd/hurdselect.c (_hurd_select): Likewise. * hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise. (STOPSIGS): Likewise. * hurd/hurdstartup.c (_hurd_startup): Likewise. * hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/msgportdemux.c (msgport_server): Likewise. * hurd/setauth.c (_hurd_setauth): Likewise. * include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise. * libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise. * locale/programs/ld-ctype.c (set_class_defaults): Likewise. * localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise. * login/tst-utmp.c (do_check): Likewise. (simulate_login): Likewise. * mach/lowlevellock.h (lll_lock): Likewise. (lll_trylock): Likewise. * math/test-fenv.c (ALL_EXC): Likewise. * math/test-fenvinline.c (ALL_EXC): Likewise. * misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise. * nis/nis_call.c (__do_niscall3): Likewise. * nis/nis_callback.c (cb_prog_1): Likewise. * nis/nis_defaults.c (searchaccess): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nis/nis_ismember.c (internal_ismember): Likewise. * nis/nis_local_names.c (nis_local_principal): Likewise. * nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise. * nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r): Likewise. * nis/ypclnt.c (yp_match): Likewise. (yp_first): Likewise. (yp_next): Likewise. (yp_master): Likewise. (yp_order): Likewise. * nscd/hstcache.c (cache_addhst): Likewise. * nscd/initgrcache.c (addinitgroupsX): Likewise. * nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise. * posix/glob.h (__GLOB_FLAGS): Likewise. * posix/regcomp.c (peek_token): Likewise. (peek_token_bracket): Likewise. (parse_expression): Likewise. * posix/regexec.c (sift_states_iter_mb): Likewise. (check_node_accept_bytes): Likewise. * posix/tst-spawn3.c (do_test): Likewise. * posix/wordexp-test.c (testit): Likewise. * posix/wordexp.c (parse_tilde): Likewise. (exec_comm): Likewise. * posix/wordexp.h (__WRDE_FLAGS): Likewise. * resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise. * setjmp/sigjmp.c (__sigjmp_save): Likewise. * stdio-common/printf_fp.c (__printf_fp_l): Likewise. * stdio-common/tst-fileno.c (do_test): Likewise. * stdio-common/vfprintf-internal.c (vfprintf): Likewise. * stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise. * stdlib/strtod_l.c (round_and_return): Likewise. (____STRTOF_INTERNAL): Likewise. * stdlib/tst-strfrom.h (TEST_STRFROM): Likewise. * string/strcspn.c (STRCSPN): Likewise. * string/test-memmem.c (simple_memmem): Likewise. * termios/tcsetattr.c (tcsetattr): Likewise. * time/alt_digit.c (_nl_parse_alt_digit): Likewise. * time/asctime.c (asctime_internal): Likewise. * time/strptime_l.c (__strptime_internal): Likewise. * time/sys/time.h (timercmp): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
2019-01-24hurd: Fix initial sigaltstack stateSamuel Thibault1-0/+1
* hurd/hurdsig.c (_hurd_thread_sigstate): Set SS_DISABLE in sigaltstack.ss_flags.
2019-01-22hurd: Support AT_EMPTY_PATHSamuel Thibault1-0/+20
* hurd/lookup-at.c (__file_name_lookup_at): When at_flags contains AT_EMPTY_PATH, call __dir_lookup and __hurd_file_name_lookup_retry directly instead of __hurd_file_name_lookup.
2019-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers87-87/+87
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.