aboutsummaryrefslogtreecommitdiff
path: root/elf
AgeCommit message (Collapse)AuthorFilesLines
2014-11-19Add new macro IN_MODULE to identify module in which source is builtSiddhesh Poyarekar2-1/+11
The current scheme to identify which module a translation unit is built in depends on defining multiple macros IS_IN_* and also defining NOT_IN_libc if we're building a non-libc module. In addition, there is an IN_LIB macro that does effectively the same thing, but for different modules (notably the systemtap probes). This macro scheme unifies both ideas to use just one macro IN_MODULE and assign it a value depending on the module it is being built into. If the module is not defined, it defaults to MODULE_libc. Patches that follow will replace uses of IS_IN_* variables with the IS_IN() macro. libc-symbols.h has been converted already to give an example of how such a transition will look. Verified that there are no relevant binary changes. One source change that will crop up repeatedly is that of nscd_stat, since it uses the build timestamp as a constant in its logic. * Makeconfig (in-module): Get value of libof set for the translation unit. (CPPFLAGS): Use $(in-module). * Makerules: Don't suffix routine names for nonlib. * include/libc-modules.h: New file. * include/libc-symbols.h: Include libc-modules.h (IS_IN): New macro to replace IS_IN_* macros. * elf/Makefile: Set libof-* for each routine. * elf/rtld-Rules: Likewise. * extra-modules.mk: Likewise. * iconv/Makefile: Likewise. * iconvdata/Makefile: Likewise. * locale/Makefile: Likewise. * malloc/Makefile: Likewise. * nss/Makefile: Likewise. * sysdeps/gnu/Makefile: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile: Likewise. * sysdeps/unix/sysv/linux/Makefile: Likewise. * sysdeps/s390/s390-64/Makefile: Likewise. * nscd/Makefile: Set libof-* for each routine. Set CFLAGS and CPPFLAGS for nscd instead of nonlib.
2014-11-06Run check-localpltk/textrel/execstack over ld.so.Carlos O'Donell1-1/+2
For maximum paranoia we run ld.so through the normal set of tests for all of the shared libraries. This includes running ld.so through check-localplt, check-textrel, and check-execstack. While none of these should trigger any failures given the way ld.so is built, it might possibly fail if a developer does something wrong. This paranoia was triggered by a discussion over the use of __strcpy vs. strcpy [1] and if the symbol could leak and use the libc.so version. The check-localplt test fails right away because localplt.data needs updating for all arches. By default we add 6 new symbols: __tls_get_addr, __libc_memalign, malloc, calloc, realloc and free. Other machines like i386, power, and s390 require some different symbol sets e.g. ___tls_get_addr vs. __tls_get_addr for i386. Verified for i386 Verified for x86_64 Verified for ppc32 Verified for ppc64 Verified for ppc64le Verified for arm Verified for aarch64 Verified for s390 Verified for s390x Guessed for alpha Guessed for ia64 Guessed for m68k Guessed for microblaze Guessed for sparc32 Guessed for sparc64 Defaults for sh Defaults for mips Defaults for hppa Defaults for tile Machine manintainers notified to double check the data used in localplt.data. [1] https://sourceware.org/ml/libc-alpha/2014-10/msg00548.html
2014-11-05Remove INTDEF / INTUSE / INTVARDEF (bug 14132).Joseph Myers3-10/+4
Completing the removal of the obsolete INTDEF / INTUSE mechanism, this patch removes the final use - that for _dl_starting_up - replacing it by rtld_hidden_def / rtld_hidden_proto. Having removed the last use, the mechanism itself is also removed. Tested for x86_64 that installed stripped shared libraries are unchanged by the patch. (This is not much of a test since this variable is only defined and used in the !HAVE_INLINED_SYSCALLS case.) [BZ #14132] * include/libc-symbols.h (INTUSE): Remove macro. (INTDEF): Likewise. (INTVARDEF): Likewise. (_INTVARDEF): Likewise. (INTDEF2): Likewise. (INTVARDEF2): Likewise. * elf/rtld.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Use rtld_hidden_def instead of INTVARDEF. * sysdeps/generic/ldsodefs.h [IS_IN_rtld] (_dl_starting_up_internal): Remove declaration. (_dl_starting_up): Use rtld_hidden_proto. * elf/dl-init.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Remove declaration. [!HAVE_INLINED_SYSCALLS] (_dl_starting_up_internal): Likewise. (_dl_init) [!HAVE_INLINED_SYSCALLS]: Don't use INTUSE with _dl_starting_up. * elf/dl-writev.h (_dl_writev): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h [!HAVE_INLINED_SYSCALLS] (DL_STARTING_UP_DEF): Use __GI__dl_starting_up instead of _dl_starting_up_internal.
2014-11-05Modify several tests to use test-skeleton.cArjun Shankar7-14/+35
This patch modifies several test cases to use test-skeleton.c. It was generated by a bash script written for this purpose and thus excludes several other tests which I deemed worth a visual inspection before making the change. I intend to follow up with individual patches to the tests skipped by the script. The script itself resides at http://git.io/WODAmg and should reproduce this very patch when run against master. ChangeLog: 2014-10-30 Arjun Shankar <arjun.is@lostca.se> * catgets/test-gencat.c: Use test-skeleton.c. * catgets/tst-catgets.c: Likewise. * csu/tst-empty.c: Likewise. * elf/tst-audit2.c: Likewise. * elf/tst-global1.c: Likewise. * elf/tst-pathopt.c: Likewise. * elf/tst-piemod1.c: Likewise. * elf/tst-tls10.c: Likewise. * elf/tst-tls11.c: Likewise. * elf/tst-tls12.c: Likewise. * gnulib/tst-gcc.c: Likewise. * iconvdata/tst-e2big.c: Likewise. * iconvdata/tst-loading.c: Likewise. * iconv/tst-iconv1.c: Likewise. * iconv/tst-iconv2.c: Likewise. * inet/test-inet6_opt.c: Likewise. * inet/tst-gethnm.c: Likewise. * inet/tst-network.c: Likewise. * inet/tst-ntoa.c: Likewise. * intl/tst-codeset.c: Likewise. * intl/tst-gettext2.c: Likewise. * intl/tst-gettext3.c: Likewise. * intl/tst-ngettext.c: Likewise. * intl/tst-translit.c: Likewise. * io/test-stat.c: Likewise. * libio/test-fmemopen.c: Likewise. * libio/tst-freopen.c: Likewise. * libio/tst-sscanf.c: Likewise. * libio/tst-ungetwc1.c: Likewise. * libio/tst-ungetwc2.c: Likewise. * libio/tst-widetext.c: Likewise. * localedata/tst-ctype.c: Likewise. * localedata/tst-digits.c: Likewise. * localedata/tst-leaks.c: Likewise. * localedata/tst-mbswcs1.c: Likewise. * localedata/tst-mbswcs2.c: Likewise. * localedata/tst-mbswcs3.c: Likewise. * localedata/tst-mbswcs4.c: Likewise. * localedata/tst-mbswcs5.c: Likewise. * localedata/tst-setlocale.c: Likewise. * localedata/tst-trans.c: Likewise. * localedata/tst-wctype.c: Likewise. * localedata/tst-xlocale1.c: Likewise. * login/tst-grantpt.c: Likewise. * malloc/tst-calloc.c: Likewise. * malloc/tst-malloc.c: Likewise. * malloc/tst-mallocstate.c: Likewise. * malloc/tst-mcheck.c: Likewise. * malloc/tst-mtrace.c: Likewise. * malloc/tst-obstack.c: Likewise. * math/atest-exp2.c: Likewise. * math/atest-exp.c: Likewise. * math/atest-sincos.c: Likewise. * math/test-matherr.c: Likewise. * math/test-misc.c: Likewise. * math/test-powl.c: Likewise. * math/tst-definitions.c: Likewise. * misc/tst-dirname.c: Likewise. * misc/tst-efgcvt.c: Likewise. * misc/tst-fdset.c: Likewise. * misc/tst-hsearch.c: Likewise. * misc/tst-mntent2.c: Likewise. * nptl/tst-sem7.c: Likewise. * nptl/tst-sem8.c: Likewise. * nptl/tst-sem9.c: Likewise. * nss/test-netdb.c: Likewise. * posix/tst-fnmatch.c: Likewise. * posix/tst-getlogin.c: Likewise. * posix/tst-gnuglob.c: Likewise. * posix/tst-mmap.c: Likewise. * pwd/tst-getpw.c: Likewise. * resolv/tst-inet_ntop.c: Likewise. * rt/tst-timer.c: Likewise. * stdio-common/test-fseek.c: Likewise. * stdio-common/test-popen.c: Likewise. * stdio-common/test-vfprintf.c: Likewise. * stdio-common/tst-cookie.c: Likewise. * stdio-common/tst-fileno.c: Likewise. * stdio-common/tst-gets.c: Likewise. * stdio-common/tst-obprintf.c: Likewise. * stdio-common/tst-perror.c: Likewise. * stdio-common/tst-sprintf2.c: Likewise. * stdio-common/tst-sprintf3.c: Likewise. * stdio-common/tst-sprintf.c: Likewise. * stdio-common/tst-swprintf.c: Likewise. * stdio-common/tst-tmpnam.c: Likewise. * stdio-common/tst-unbputc.c: Likewise. * stdio-common/tst-wc-printf.c: Likewise. * stdlib/tst-environ.c: Likewise. * stdlib/tst-fmtmsg.c: Likewise. * stdlib/tst-limits.c: Likewise. * stdlib/tst-rand48-2.c: Likewise. * stdlib/tst-rand48.c: Likewise. * stdlib/tst-random2.c: Likewise. * stdlib/tst-random.c: Likewise. * stdlib/tst-strtol.c: Likewise. * stdlib/tst-strtoll.c: Likewise. * stdlib/tst-tls-atexit.c: Likewise. * stdlib/tst-xpg-basename.c: Likewise. * string/test-ffs.c: Likewise. * string/tst-bswap.c: Likewise. * string/tst-inlcall.c: Likewise. * string/tst-strtok.c: Likewise. * string/tst-strxfrm.c: Likewise. * sysdeps/x86_64/tst-audit10.c: Likewise. * sysdeps/x86_64/tst-audit3.c: Likewise. * sysdeps/x86_64/tst-audit4.c: Likewise. * sysdeps/x86_64/tst-audit5.c: Likewise. * time/tst-ftime_l.c: Likewise. * time/tst-getdate.c: Likewise. * time/tst-mktime3.c: Likewise. * time/tst-mktime.c: Likewise. * time/tst-posixtz.c: Likewise. * time/tst-strptime2.c: Likewise. * time/tst-strptime3.c: Likewise. * wcsmbs/tst-btowc.c: Likewise. * wcsmbs/tst-mbrtowc.c: Likewise. * wcsmbs/tst-mbsrtowcs.c: Likewise. * wcsmbs/tst-wchar-h.c: Likewise. * wcsmbs/tst-wcpncpy.c: Likewise. * wcsmbs/tst-wcrtomb.c: Likewise. * wcsmbs/tst-wcsnlen.c: Likewise. * wcsmbs/tst-wcstof.c: Likewise.
2014-11-05Don't use INTDEF/INTUSE with _dl_mcount (bug 14132).Joseph Myers3-3/+3
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this patch replaces its use for _dl_mcount with use of rtld_hidden_def / rtld_hidden_proto. Tested for x86_64 that installed stripped shared libraries are unchanged by the patch. [BZ #14132] * elf/dl-profile.c (_dl_mcount): Use rtld_hidden_def instead of INTDEF. * sysdeps/generic/ldsodefs.h (_dl_mcount_internal): Remove declaration. (_dl_mcount): Use rtld_hidden_proto. * elf/dl-runtime.c (_dl_profile_fixup): Don't use INTUSE with _dl_mcount. * elf/rtld.c (_rtld_global_ro): Likewise.
2014-11-04Don't use INTDEF/INTUSE with _dl_init (bug 14132).Joseph Myers1-1/+0
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this patch eliminates its use for _dl_init. Since _dl_init was already declared with hidden visibility, creating a second hidden alias for it was completely pointless, so this patch replaces all uses of _dl_init_internal with plain _dl_init instead of using hidden_proto / hidden_def (which are only needed when you want a hidden alias for a non-hidden symbol; it's quite possible there are cases where they are used but don't need to be because the symbol in question is not part of the public ABI and is only used within a single library, so using attributes_hidden instead would suffice). Tested for x86_64 that installed stripped shared libraries are unchanged by the patch. [BZ #14132] * elf/dl-init.c (_dl_init): Don't use INTDEF. * sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead of _dl_init_internal. * sysdeps/alpha/dl-machine.h (RTLD_START): Likewise. * sysdeps/arm/dl-machine.h (RTLD_START): Likewise. * sysdeps/hppa/dl-machine.h (RTLD_START): Likewise. * sysdeps/i386/dl-machine.h (RTLD_START): Likewise. * sysdeps/ia64/dl-machine.h (RTLD_START): Likewise. * sysdeps/m68k/dl-machine.h (RTLD_START): Likewise. * sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise. * sysdeps/mips/dl-machine.h (RTLD_START): Likewise. * sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise. * sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise. * sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise. * sysdeps/sh/dl-machine.h (RTLD_START): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise. * sysdeps/tile/dl-start.S (_start): Likewise. * sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise. * sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
2014-11-04Don't use INTDEF/INTUSE with _dl_argv (bug 14132).Joseph Myers2-21/+21
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this patch replaces its use for _dl_argv with rtld_hidden_data_def and rtld_hidden_proto. Some places in .S files that previously used _dl_argv_internal or INTUSE(_dl_argv) now use __GI__dl_argv directly (there are plenty of existing examples of such direct use of __GI_*). A single place in rtld.c previously used _dl_argv without INTUSE, apparently accidentally, while the rtld_hidden_proto mechanism avoids such accidential omissions. As a consequence, this patch *does* change the contents of stripped ld.so. However, the installed stripped shared libraries are identical to those you get if instead of this patch you change that single _dl_argv use to use INTUSE, without any other changes. Tested for x86_64 (testsuite as well as comparison of installed stripped shared libraries as described above). [BZ #14132] * sysdeps/generic/ldsodefs.h (_dl_argv): Use rtld_hidden_proto. [IS_IN_rtld] (_dl_argv_internal): Do not declare. (rtld_progname): Make macro definition unconditional. * elf/rtld.c (_dl_argv): Use rtld_hidden_data_def instead of INTDEF. (dlmopen_doit): Do not use INTUSE with _dl_argv. (dl_main): Likewise. * elf/dl-sysdep.c (_dl_sysdep_start): Likewise. * sysdeps/alpha/dl-machine.h (RTLD_START): Use __GI__dl_argv instead of _dl_argv_internal. * sysdeps/powerpc/powerpc32/dl-start.S (_dl_start_user): Use __GI__dl_argv instead of INTUSE(_dl_argv). * sysdeps/powerpc/powerpc64/dl-machine.h (RTLD_START): Use __GI__dl_argv instead of _dl_argv_internal.
2014-10-31Add a hook to enable load-time inspection of program headersMatthew Fortune2-0/+40
This hook can be used to perform additional compatibility checks between shared libraries by inspecting custom program header information. * elf/dl-machine-reject-phdr.h: New file. * elf/dl-load.c: #include that. (open_verify): Call elf_machine_reject_phdr_p and ignore the file if that returned true.
2014-10-28elf/dl-load.c: Use __strdup.Carlos O'Donell1-19/+5
During a refactoring pass several repeated blocks of code in dl-load.c were turned into a call to a local function named local_strdup. There is no need for local_strdup, and the routines should instead call __strdup. This change does just that. We call the internal symbol __strdup because calling strdup is unsafe. The user might be using a standard that doesn't include strdup and may have defined this symbol in their application. During a static link we might reference the user defined symbol and crash if it doesn't implement a standards conforming strdup. The resulting code is simpler to understand, and makes it easier to debug. No regressions on x86_64. 2014-10-28 Carlos O'Donell <carlos@redhat.com> * dl-load.c (local_strdup): Remove. (expand_dynamic_string_token): Use __strdup. (decompose_rpath): Likewise. (_dl_map_object): Likewise.
2014-10-10Don't use INTVARDEF/INTUSE with __libc_enable_secure (bug 14132).Joseph Myers4-21/+21
Continuing the removal of the obsolete INTDEF / INTVARDEF / INTUSE mechanism, this patch replaces its use for __libc_enable_secure with the use of rtld_hidden_data_def and rtld_hidden_proto. Tested for x86_64 that installed stripped shared libraries are unchanged by the patch. [BZ #14132] * elf/dl-sysdep.c (__libc_enable_secure): Use rtld_hidden_data_def instead of INTVARDEF. (_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure. * sysdeps/mach/hurd/dl-sysdep.c (__libc_enable_secure): Use rtld_hidden_data_def instead of INTVARDEF. (_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure. * elf/dl-deps.c (expand_dst): Likewise. * elf/dl-load.c (_dl_dst_count): Likewise. (_dl_dst_substitute): Likewise. (decompose_rpath): Likewise. (_dl_init_paths): Likewise. (open_path): Likewise. (_dl_map_object): Likewise. * elf/rtld.c (dl_main): Likewise. (process_dl_audit): Likewise. (process_envvars): Likewise. * include/unistd.h [IS_IN_rtld] (__libc_enable_secure_internal): Remove declaration. (__libc_enable_secure): Use rtld_hidden_proto.
2014-10-09remove nested functions from elf/dl-load.cKostya Serebryany1-36/+52
2014-10-08Remove unnecessarily nested function in do_lookup_unique.Roland McGrath1-27/+30
2014-10-01remove nested functions from elf/dl-deps.cKostya Serebryany1-15/+15
2014-09-29Correctly size profiling reloc table (bug 17411)Carlos O'Donell1-2/+6
During auditing or profiling modes the dynamic loader builds a cache of the relocated PLT entries in order to reuse them when called again through the same PLT entry. This way the PLT entry is never completed and the call into the resolver always results in profiling or auditing code running. The problem is that the PLT relocation cache size is not computed correctly. The size of the cache should be "Size of a relocation result structure" x "Number of PLT-related relocations". Instead the code erroneously computes "Size of a relocation result" x "Number of bytes worth of PLT-related relocations". I can only assume this was a mistake in the understanding of the value of DT_PLTRELSZ which is the number of bytes of PLT-related relocs. We do have a DT_RELACOUNT entry, which is a count for dynamic relative relocs, but we have no DT_PLTRELCOUNT and thus we need to compute it. This patch corrects the computation of the size of the relocation table used by the glibc profiling code. For more details see: https://sourceware.org/ml/libc-alpha/2014-09/msg00513.html [BZ #17411] * elf/dl-reloc.c (_dl_relocate_object): Allocate correct amount for l_reloc_result.
2014-09-16Remove CFLAGS for interp.cSiddhesh Poyarekar2-3/+12
Replace it with including an auto-generated linker-runtime.h. Build-tested on x86_64 and found that there was no change in the generated code. * elf/Makefile (CFLAGS-interp.c): Remove. ($(elf-objpfx)runtime-linker.h): Generate header with linker path string. * elf/interp.c: Include generated runtime-linker.h
2014-09-16Include .interp section only for libc.soSiddhesh Poyarekar1-2/+1
Barring libc.so and libdl.so, none of the libraries have any entry points, so it is pointless to add a .interp section for them. The libdl.so entry point (in dlfcn/eval.c) is also defunct, so remove that file as well. Build tested for x86_64, ppc64 and s390x. I have not moved CFLAGS-interp.c to CPPFLAGS-interp.c isnce I'll be removing it completely in a follow-up patch. Siddhesh * Makerules (lib%.so): Don't include $(+interp) in prerequisites. * elf/Makefile (CFLAGS-interp.c): Don't define NOT_IN_libc. * dlfcn/eval.c: Remove file.
2014-07-14Correct DT_PPC64_NUMAlan Modra1-1/+1
[BZ #17153] * elf/elf.h (DT_PPC64_NUM): Correct value. * NEWS: Add to fixed bug list.
2014-07-03Rely on HP_TIMING_AVAIL implies HP_SMALL_TIMING_AVAILRichard Henderson2-20/+6
2014-07-03Remove HP_TIMING_DIFF_INIT and dl_hp_timing_overheadRichard Henderson1-3/+0
Without HP_TIMING_ACCUM, dl_hp_timing_overhead is write-only. If we remove it, there's no point in HP_TIMING_DIFF_INIT either.
2014-06-26Fix Wundef warning for ELF_MACHINE_NO_RELASiddhesh Poyarekar1-1/+1
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested only on x86_64 to verify that the sources before and after are identical except for two instructions that pass the current line number in dl-machine.h to assert_fail.
2014-06-23elf/dl-lookup.c: Use __glibc_likely and __glibc_unlikelyWill Newton1-20/+19
Convert all uses of __builtin_expect to __glibc_likely and __glibc_unlikely. Most of these are trivial boolean expressions but a few were not. In particular the use of __builtin_expect in the switch expression in do_lookup_x has been removed. Verified that there are no code changes on x86_64 and ARM aside from line numbers. ChangeLog: 2014-06-23 Will Newton <will.newton@linaro.org> * elf/dl-lookup.c: Use __glibc_unlikely and __glibc_likely rather than __builtin_expect.
2014-06-23elf/dl-lookup.c: Remove unnecessary static variableWill Newton1-4/+1
undefined_msg is only used once contrary to the comment. ChangeLog: 2014-06-23 Will Newton <will.newton@linaro.org> * elf/dl-lookup.c (undefined_msg): Remove variable. (_dl_lookup_symbol_x): Replace undefined_msg with string literal.
2014-06-23elf/dl-lookup.c: Move STB_GNU_UNIQUE handling to a functionWill Newton1-145/+159
Move handling of STB_GNU_UNIQUE symbols to a separate function from do_lookup_x in order to make the code more readable. The new function gets inlined with gcc 4.8 on ARM and the do_lookup_x code becomes a few bytes smaller. ChangeLog: 2014-06-23 Will Newton <will.newton@linaro.org> * elf/dl-lookup.c (do_lookup_unique): New function. (do_lookup_x): Move STB_GNU_UNIQUE handling code to a separate function.
2014-06-20[BZ #16046] dl_iterate_phdr static executable testMaciej W. Rozycki2-1/+48
2014-06-18Use $(rtld-prefix) more consistently.Joseph Myers1-2/+1
The glibc makefiles have a standard variable, $(rtld-prefix), to run the dynamic linker with a default --library-path option; this is used as the basis of lots of other variables for running programs compiled with the newly built library. A few places however use $(elf-objpfx)ld.so or $(elf-objpfx)${rtld-installed-name} directly, with such a --library-path option. This patch makes such places use $(rtld-prefix) instead. I'm not aware of any significance in these cases to the choice of ld.so or ${rtld-installed-name} when running the dynamic linker, or to whether $(patsubst %,:%,$(sysdep-library-path)) is included in the library-path as it is in $(rtld-prefix) and just one of the places being changed. Tested x86_64. * elf/Makefile ($(objpfx)tst-unused-dep.out): Use $(rtld-prefix). * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Likewise. localedata/ChangeLog: * Makefile (LOCALEDEF): Use $(rtld-prefix).
2014-06-07Remove redundant C locale settings.Joseph Myers1-1/+0
Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
2014-06-06Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers2-3/+5
consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-05-27Remove duplicate code in elf/dl-deps.c.Ondřej Bílka1-31/+19
2014-05-27Remove second argument from TLS_INIT_TP macroAndreas Schwab2-3/+3
2014-05-16Use existing makefile variables for dependencies on glibc libraries.Joseph Myers1-2/+2
glibc's Makeconfig defines some variables such as $(libm) and $(libdl) for linking with libraries built by glibc, and nptl/Makeconfig (included by the toplevel Makeconfig) defines others such as $(shared-thread-library). In some places glibc's Makefiles use those variables when linking against the relevant libraries, but in other places they hardcode the location of the libraries in the build tree. This patch cleans up various places to use the variables that already exist (in the case of libm, replacing several duplicate definitions of a $(link-libm) variable in subdirectory Makefiles). (It's not necessarily exactly equivalent to what the existing code does - in particular, $(shared-thread-library) includes libpthread_nonshared, but is replacing places that just referred to libpthread.so. But I think that change is desirable on the general principle of linking things as close as possible to the way in which they would be linked with an installed library, unless there is a clear reason not to do so.) To support running tests with an installed copy of glibc without needing the full build tree from when that copy was built, I think it will be useful to use such variables more generally and systematically - every time the rules for building a test refer to some file from the build tree that's also installed by glibc, use a makefile variable so that the installed-testing case can point those variables to installed copies of the files. This patch just deals with straightforward cases where such variables already exist. It's quite possible some uses of $(shared-thread-library) should actually be a new $(thread-library) variable that's set appropriately in the --disable-shared case, if those uses would in fact work without shared libraries. I didn't change the status quo that those cases hardcode use of a shared library whether or not it's actually needed (but other uses such as $(libm) and $(libdl) would now get the static library if the shared library isn't built, when some previously hardcoded use of the shared library - if they actually need shared libraries, the test itself needs an enable-shared conditional anyway). Tested x86_64. * benchtests/Makefile ($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm), not $(common-objpfx)math/libm.so. ($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * elf/Makefile ($(objpfx)noload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. ($(objpfx)tst-audit8): Depend on $(libm), not $(common-objpfx)math/libm.so. * malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * math/Makefile ($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))): Depend on $(libm), not $(objpfx)libm.so. Do not condition on [$(build-shared) = yes]. ($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not $(common-objpfx)math/libm.so$(libm.so-version) or $(common-objpfx)math/libm.a depending on [$(build-shared) = yes]. * nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * setjmp/Makefile (link-libm): Remove variable. ($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm). * stdio-common/Makefile (link-libm): Remove variable. ($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm). * stdlib/Makefile (link-libm): Remove variable. ($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm). ($(objpfx)tst-strtod-round): Likewise. ($(objpfx)tst-tininess): Likewise. ($(objpfx)tst-strtod-underflow): Likewise. ($(objpfx)tst-strtod6): Likewise. ($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and $(libdl), not $(common-objpfx)nptl/libpthread.so and $(common-objpfx)dlfcn/libdl.so.
2014-05-14Remove last use of USE___THREADAndreas Schwab1-149/+5
2014-05-09Fix elf/tst-tls9-static buildAdhemerval Zanella1-2/+2
This patch fixes the tst-tlsmod[5/6].so build in system that uses -Wl,--as-needed as default in linker option. Without this option the testing shared library that does not have libc.so in DT_NEEDED and the tst-tls9-static fails in architecture that use the ./sysdeps/unix/sysv/linux/<arch>/dl-static.c trick.
2014-05-05Move rules for Linux-specific pldd program to Linux-specific Makefile.Roland McGrath1-6/+2
2014-04-112014-04-11 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov1-1/+4
* elf/Makefile (tests): make tst-dlopen-aout conditional on enable-hardcoded-path-in-tests
2014-04-03Factor mmap/munmap of PT_LOAD segments out of _dl_map_object_from_fd et al.Roland McGrath6-200/+350
2014-04-03elf/dl-lookup.c: Remove obsolete comment about nested functionWill Newton1-5/+4
The nested function referred to has gone away so remove the comment. Also move the variable declaration down to where other variables of a similar lifetime are declared for clarity. 2014-04-03 Will Newton <will.newton@linaro.org> * elf/dl-lookup.c (do_lookup_x): Remove comment referring to nested function and move variable declarations down to before first use.
2014-03-272014-03-27 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov1-10/+8
* elf/dl-load.c: Finish conversion of __builtin_expect into __glibc_{un}likely.
2014-03-262014-03-26 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov1-40/+36
* elf/dl-load.c: Convert __builtin_expect into __glibc_{un}likely.
2014-03-25Add empty GLIBC_2.2.5 version to elf/Versions.Joseph Myers1-0/+3
As needed for SHLIB_COMPAT calls using this version. * elf/Versions (libc) [EXPORT_UNWIND_FIND_FDE]: Add empty GLIBC_2.2.5 version.
2014-03-24Address post-commit patch comments.Paul Pluzhnikov1-2/+8
2014-03-24 Paul Pluzhnikov <ppluzhnikov@google.com> * elf/tst-dlopen-aout.c: Adjust comments. Use test-skeleton.c
2014-03-24Fix BZ #16634.Paul Pluzhnikov3-13/+87
An application that erroneously tries to repeatedly dlopen("a.out", ...) may hit assertion failure: Inconsistency detected by ld.so: dl-tls.c: 474: _dl_allocate_tls_init: Assertion `listp != ((void *)0)' failed! dlopen() actually fails with "./a.out: cannot dynamically load executable", but it does so after incrementing dl_tls_max_dtv_idx. Once we run out of TLS_SLOTINFO_SURPLUS (62), we exit with above assertion failure. 2014-03-24 Paul Pluzhnikov <ppluzhnikov@google.com> [BZ #16634] * elf/dl-load.c (open_verify): Add mode parameter. Error early when ET_EXEC and mode does not have __RTLD_OPENEXEC. (open_path): Change from boolean 'secure' to complete flag 'mode' (_dl_map_object): Adjust. * elf/Makefile (tests): Add tst-dlopen-aout. * elf/tst-dlopen-aout.c: New test.
2014-03-13stop supporting bash-1.xMike Frysinger1-15/+8
We've stopped supporting toolchain packages older than 2009, so punting bash-1.x is reasonable when bash-2 was released almost 20 years ago.
2014-03-13sotruss: drop ksh support and add basic POSIX shell supportMike Frysinger2-10/+7
This script works fine under bash as-is, so we don't need ksh anymore. Once we tweak the function style, the code even works (for the most part) under a POSIX shell. The localized strings will be prepended with a $, but it is otherwise functional.
2014-03-13Use __ehdr_start, when available, for rtld to get its own headers.Roland McGrath1-4/+19
2014-03-13Add missing elf/tst-pie2.c -- should have been inPaul Pluzhnikov1-0/+38
commit 798212a01311491d5e14fcda687460b75f8ca286
2014-03-122014-03-12 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov3-6/+8
[BZ #16381] * elf/Makefile (tests): Add tst-pie2. (tests-pie): Add tst-pie2. * elf/tst-pie2.c: New file. * elf/dl-load.c (_dl_map_object_from_fd): Assert correct l_type for ET_EXEC. * elf/rtld.c (map_doit): Load executable as lt_executable. (dl_main): Likewise.
2014-03-07Make tests consistently use *.out output files.Joseph Myers1-5/+5
This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers1-36/+22
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-02-28Promote do_lookup_x:check_match to a full function.Carlos O'Donell1-104/+122
While it may be argued that nested functions make the resulting code easier to read, or worse to read the following two bugs make it difficult to debug: Bug 8300 - no local symbol information within nested or nesting procedures https://sourceware.org/bugzilla/show_bug.cgi?id=8300 Bug 53927 - wrong value for DW_AT_static_link http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53927 Until these are fixed I've made check_match a full function. After they are fixed we can resume arguing about the merits of nested functions on readability and maintenance.
2014-02-28Fix fallout from Joseph's untested Makeconfig change.Roland McGrath1-3/+3
generated by cgit v1.1 at 2024-07-30 07:46:54 +0000