| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
Add generic code to handle PT_GNU_PROPERTY notes. Invalid
content is ignored, _dl_process_pt_gnu_property is always called
after PT_LOAD segments are mapped and it has no failure modes.
Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which
contains target specific properties: the _dl_process_gnu_property
hook is called for each property.
The old _dl_process_pt_note and _rtld_process_pt_note differ in how
the program header is read. The old _dl_process_pt_note is called
before PT_LOAD segments are mapped and _rtld_process_pt_note is called
after PT_LOAD segments are mapped. The old _rtld_process_pt_note is
removed and _dl_process_pt_note is always called after PT_LOAD
segments are mapped and now it has no failure modes.
The program headers are scanned backwards so that PT_NOTE can be
skipped if PT_GNU_PROPERTY exists.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This function is defined in libc.so, and the dynamic loader calls
right after relocation has been finished, before any ELF constructors
or the preinit function is invoked. It is also used in the static
build for initializing parts of the static libc.
To locate __libc_early_init, a direct symbol lookup function is used,
_dl_lookup_direct. It does not search the entire symbol scope and
consults merely a single link map. This function could also be used
to implement lookups in the vDSO (as an optimization).
A per-namespace variable (libc_map) is added for locating libc.so,
to avoid repeated traversals of the search scope. It is similar to
GL(dl_initfirst). An alternative would have been to thread a context
argument from _dl_open down to _dl_map_object_from_fd (where libc.so
is identified). This could have avoided the global variable, but
the change would be larger as a result. It would not have been
possible to use this to replace GL(dl_initfirst) because that global
variable is used to pass the function pointer past the stack switch
from dl_main to the main program. Replacing that requires adding
a new argument to _dl_init, which in turn needs changes to the
architecture-specific libc.so startup code written in assembler.
__libc_early_init should not be used to replace _dl_var_init (as
it exists today on some architectures). Instead, _dl_lookup_direct
should be used to look up a new variable symbol in libc.so, and
that should then be initialized from the dynamic loader, immediately
after the object has been loaded in _dl_map_object_from_fd (before
relocation is run). This way, more IFUNC resolvers which depend on
these variables will work.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
To improve GCC 10 compatibility, it is necessary to remove the l_audit
zero-length array from the end of struct link_map. In preparation of
that, this commit introduces an accessor function for the audit state,
so that it is possible to change the representation of the audit state
without adjusting the code that accesses it.
Tested on x86_64-linux-gnu. Built on i686-gnu.
Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
|
|
Transforms this, when linking in a shared object:
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3"..., 832) = 832
lseek(3, 792, SEEK_SET) = 792
read(3, "\4\0\0\0\24\0\0\0"..., 68) = 68
fstat(3, {st_mode=S_IFREG|0755, st_size=6699224, ...}) = 0
lseek(3, 792, SEEK_SET) = 792
read(3, "\4\0\0\0\24\0\0\0"..., 68) = 68
lseek(3, 864, SEEK_SET) = 864
read(3, "\4\0\0\0\20\0\0\0"..., 32) = 32
Into this:
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3"..., 832) = 832
pread(3, "\4\0\0\0\24\0\0\0"..., 68, 792) = 68
fstat(3, {st_mode=S_IFREG|0755, st_size=6699224, ...}) = 0
pread(3, "\4\0\0\0\24\0\0\0"..., 68, 792) = 68
pread(3, "\4\0\0\0\20\0\0\0"..., 32, 864) = 32
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
This removes dead code during note processing.
|
|
Commit a42faf59d6d9f82e5293a9ebcc26d9c9e562b12b ("Fix BZ #16634.")
attempted to fix a TLS modid consistency issue by adding additional
checks to the open_verify function. However, this is fragile
because open_verify cannot reliably predict whether
_dl_map_object_from_fd will later fail in the more complex cases
(such as memory allocation failures). Therefore, this commit
assigns the TLS modid as late as possible. At that point, the link
map pointer will eventually be passed to _dl_close, which will undo
the TLS modid assignment.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
If the loader is invoked explicitly and loads the main executable,
it stores the file ID of the main executable in l_file_id. This
information is not available if the main excutable is loaded by the
kernel, so this is another case where the two cases differ.
This enhances commit 23d2e5faf0bca6d9b31bef4aa162b95ee64cbfc6
("elf: Self-dlopen failure with explict loader invocation
[BZ #24900]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
Another executable has already been mapped, so the dynamic linker
cannot perform relocations correctly for the second executable.
|
|
Most of the code was removed in commit
20739e5454c12acbc0479387fe795c5b19a4166f ("* elf/dl-load.c:
Remove support for systems without MAP_ANON.").
|
|
The GNU Coding Standards specify that line breaks in expressions
should go before an operator, not after one. This patch fixes various
code to do this. It only changes code that appears to be mostly
following GNU style anyway, not files and directories with
substantially different formatting. It is not exhaustive even for
files using GNU style (for example, changes to sysdeps files are
deferred for subsequent cleanups). Some files changed are shared with
gnulib, but most are specific to glibc. Changes were made manually,
with places to change found by grep (so some cases, e.g. where the
operator was followed by a comment at end of line, are particularly
liable to have been missed by grep, but I did include cases where the
operator was followed by backslash-newline).
This patch generally does not attempt to address other coding style
issues in the expressions changed (for example, missing spaces before
'(', or lack of parentheses to ensure indentation of continuation
lines properly reflects operator precedence).
Tested for x86_64, and with build-many-glibcs.py.
* benchtests/bench-memmem.c (simple_memmem): Break lines before
rather than after operators.
* benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise.
* crypt/md5.c (md5_finish_ctx): Likewise.
* crypt/sha256.c (__sha256_finish_ctx): Likewise.
* crypt/sha512.c (__sha512_finish_ctx): Likewise.
* elf/cache.c (load_aux_cache): Likewise.
* elf/dl-load.c (open_verify): Likewise.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* elf/readelflib.c (process_elf_file): Likewise.
* elf/rtld.c (dl_main): Likewise.
* elf/sprof.c (generate_call_graph): Likewise.
* hurd/ctty-input.c (_hurd_ctty_input): Likewise.
* hurd/ctty-output.c (_hurd_ctty_output): Likewise.
* hurd/dtable.c (reauth_dtable): Likewise.
* hurd/getdport.c (__getdport): Likewise.
* hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise.
* hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise.
* hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise):
Likewise.
* hurd/hurdioctl.c (fioctl): Likewise.
* hurd/hurdselect.c (_hurd_select): Likewise.
* hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise.
(STOPSIGS): Likewise.
* hurd/hurdstartup.c (_hurd_startup): Likewise.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise.
* hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise.
* hurd/msgportdemux.c (msgport_server): Likewise.
* hurd/setauth.c (_hurd_setauth): Likewise.
* include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise.
* libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise.
* locale/programs/ld-ctype.c (set_class_defaults): Likewise.
* localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise.
* login/tst-utmp.c (do_check): Likewise.
(simulate_login): Likewise.
* mach/lowlevellock.h (lll_lock): Likewise.
(lll_trylock): Likewise.
* math/test-fenv.c (ALL_EXC): Likewise.
* math/test-fenvinline.c (ALL_EXC): Likewise.
* misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise.
* nis/nis_call.c (__do_niscall3): Likewise.
* nis/nis_callback.c (cb_prog_1): Likewise.
* nis/nis_defaults.c (searchaccess): Likewise.
* nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise.
* nis/nis_ismember.c (internal_ismember): Likewise.
* nis/nis_local_names.c (nis_local_principal): Likewise.
* nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise.
* nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r):
Likewise.
* nis/ypclnt.c (yp_match): Likewise.
(yp_first): Likewise.
(yp_next): Likewise.
(yp_master): Likewise.
(yp_order): Likewise.
* nscd/hstcache.c (cache_addhst): Likewise.
* nscd/initgrcache.c (addinitgroupsX): Likewise.
* nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise.
(internal_getpwuid_r): Likewise.
* nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise.
* posix/glob.h (__GLOB_FLAGS): Likewise.
* posix/regcomp.c (peek_token): Likewise.
(peek_token_bracket): Likewise.
(parse_expression): Likewise.
* posix/regexec.c (sift_states_iter_mb): Likewise.
(check_node_accept_bytes): Likewise.
* posix/tst-spawn3.c (do_test): Likewise.
* posix/wordexp-test.c (testit): Likewise.
* posix/wordexp.c (parse_tilde): Likewise.
(exec_comm): Likewise.
* posix/wordexp.h (__WRDE_FLAGS): Likewise.
* resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise.
* setjmp/sigjmp.c (__sigjmp_save): Likewise.
* stdio-common/printf_fp.c (__printf_fp_l): Likewise.
* stdio-common/tst-fileno.c (do_test): Likewise.
* stdio-common/vfprintf-internal.c (vfprintf): Likewise.
* stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise.
* stdlib/strtod_l.c (round_and_return): Likewise.
(____STRTOF_INTERNAL): Likewise.
* stdlib/tst-strfrom.h (TEST_STRFROM): Likewise.
* string/strcspn.c (STRCSPN): Likewise.
* string/test-memmem.c (simple_memmem): Likewise.
* termios/tcsetattr.c (tcsetattr): Likewise.
* time/alt_digit.c (_nl_parse_alt_digit): Likewise.
* time/asctime.c (asctime_internal): Likewise.
* time/strptime_l.c (__strptime_internal): Likewise.
* time/sys/time.h (timercmp): Likewise.
* time/tzfile.c (__tzfile_compute): Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
Intel Control-flow Enforcement Technology (CET) instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en
forcement-technology-preview.pdf
includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK).
GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to
indicate that all executable sections are compatible with IBT when
ENDBR instruction starts each valid target where an indirect branch
instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on
output only if it is set on all relocatable inputs.
On an IBT capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable IBT and
lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable.
2. When loading an executable with an interpreter, enable IBT if
GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable,
disable IBT.
b. Lock IBT.
3. If IBT is enabled, when loading a shared object without
GNU_PROPERTY_X86_FEATURE_1_IBT:
a. If legacy interwork is allowed, then mark all pages in executable
PT_LOAD segments in legacy code page bitmap. Failure of legacy code
page bitmap allocation causes an error.
b. If legacy interwork isn't allowed, it causes an error.
GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to
indicate that all executable sections are compatible with SHSTK where
return address popped from shadow stack always matches return address
popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK
on output only if it is set on all relocatable inputs.
On a SHSTK capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable.
2. When loading an executable with an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable
or any shared objects loaded via the DT_NEEDED tag, disable SHSTK.
b. Otherwise lock SHSTK.
3. After SHSTK is enabled, it is an error to load a shared object
without GNU_PROPERTY_X86_FEATURE_1_SHSTK.
To enable CET support in glibc, --enable-cet is required to configure
glibc. When CET is enabled, both compiler and assembler must support
CET. Otherwise, it is a configure-time error.
To support CET run-time control,
1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate
if IBT or SHSTK are enabled at run-time. It should be initialized by
init_cpu_features.
2. For dynamic executables:
a. A l_cet field is added to struct link_map to indicate if IBT or
SHSTK is enabled in an ELF module. _dl_process_pt_note or
_rtld_process_pt_note is called to process PT_NOTE segment for
GNU program property and set l_cet.
b. _dl_open_check is added to check IBT and SHSTK compatibilty when
dlopening a shared object.
3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with
_dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if
SHSTK is enabled.
CET run-time control can be changed via GLIBC_TUNABLES with
$ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off]
$ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off]
1. permissive: SHSTK is disabled when dlopening a legacy ELF module.
2. on: IBT or SHSTK are always enabled, regardless if there are IBT or
SHSTK bits in GNU program property.
3. off: IBT or SHSTK are always disabled, regardless if there are IBT or
SHSTK bits in GNU program property.
<cet.h> from CET-enabled GCC is automatically included by assembly codes
to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK
to GNU program property. _CET_ENDBR is added at the entrance of all
assembly functions whose address may be taken. _CET_NOTRACK is used to
insert NOTRACK prefix with indirect jump table to support IBT. It is
defined as notrack when _CET_NOTRACK is defined in <cet.h>.
[BZ #21598]
* configure.ac: Add --enable-cet.
* configure: Regenerated.
* elf/Makefille (all-built-dso): Add a comment.
* elf/dl-load.c (filebuf): Moved before "dynamic-link.h".
Include <dl-prop.h>.
(_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE
segment.
* elf/dl-open.c: Include <dl-prop.h>.
(dl_open_worker): Call _dl_open_check.
* elf/rtld.c: Include <dl-prop.h>.
(dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call
_rtld_main_check.
* sysdeps/generic/dl-prop.h: New file.
* sysdeps/i386/dl-cet.c: Likewise.
* sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise.
* sysdeps/x86/cet-tunables.h: Likewise.
* sysdeps/x86/check-cet.awk: Likewise.
* sysdeps/x86/configure: Likewise.
* sysdeps/x86/configure.ac: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
* sysdeps/x86/dl-procruntime.c: Likewise.
* sysdeps/x86/dl-prop.h: Likewise.
* sysdeps/x86/libc-start.h: Likewise.
* sysdeps/x86/link_map.h: Likewise.
* sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
(_dl_runtime_resolve_shstk): New.
(_dl_runtime_profile_shstk): Likewise.
* sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet
if CET is enabled.
(CFLAGS-.o): Add -fcf-protection if CET is enabled.
(CFLAGS-.os): Likewise.
(CFLAGS-.op): Likewise.
(CFLAGS-.oS): Likewise.
(asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET
is enabled.
(tests-special): Add $(objpfx)check-cet.out.
(cet-built-dso): New.
(+$(cet-built-dso:=.note)): Likewise.
(common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note).
($(objpfx)check-cet.out): New.
(generated): Add check-cet.out.
* sysdeps/x86/cpu-features.c: Include <dl-cet.h> and
<cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New prototype.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
(init_cpu_features): Call get_cet_status to check CET status
and update dl_x86_feature_1 with CET status. Call
TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK
(set_x86_shstk). Disable and lock CET in libc.a.
* sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New function.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
* sysdeps/x86/sysdep.h (_CET_NOTRACK): New.
(_CET_ENDBR): Define if not defined.
(ENTRY): Add _CET_ENDBR.
* sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and
x86_shstk.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
|
|
The comments in _dl_dst_count is adjusted to match what the code does
which is count DSTs from the start of the string. With the removal of
DL_DST_COUNT we no longer accept an input that starts at the first $.
In _dl_dst_substitute we adjust the comment to indicate that both
conditions must be true for the SUID/SGID $ORIGIN exception.
|
|
This commit improves DST handling significantly in the following
ways: firstly is_dst () is overhauled to correctly process DST
sequences that would be accepted given the ELF gABI. This means that
we actually now accept slightly more sequences than before. Now we
accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or
$ORIGIN/..., but this kind of behaviour results in unexpected
and uninterpreted DST sequences being used as literal search paths
leading to security defects. Therefore the first step in correcting
this defect is making is_dst () properly account for all DSTs
and making the function context free in the sense that it counts
DSTs without knowledge of path, or AT_SECURE. Next, _dl_dst_count ()
is also simplified to count all DSTs regardless of context.
Then in _dl_dst_substitute () we reintroduce context-dependent
processing for such things as AT_SECURE handling. At the level of
_dl_dst_substitute we can have access to things like the true start
of the string sequence to validate $ORIGIN-based paths rooted in
trusted directories. Lastly, we tighten up the accepted sequences
in AT_SECURE, and avoid leaving known unexpanded DSTs, this is
noted in the NEWS entry.
Verified with a sequence of 68 tests on x86_64 that cover
non-AT_SECURE and AT_SECURE testing using a sysroot (requires root
to run). The tests cover cases for bug 23102, bug 21942, bug 18018,
and bug 23259. These tests are not yet appropriate for the glibc
regression testsuite, but with the upcoming test-in-container testing
framework it should be possible to include these tests upstream soon.
See the mailing list for the tests:
https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
|
|
Neither the <dlfcn.h> entry points, nor lazy symbol resolution, nor
initial shared library load-up, are cancellation points, so ld.so
should exclusively use I/O primitives that are not cancellable. We
currently achieve this by having the cancellation hooks compile as
no-ops when IS_IN(rtld); this patch changes to using exclusively
_nocancel primitives in the source code instead, which makes the
intent clearer and significantly reduces the amount of code compiled
under IS_IN(rtld) as well as IS_IN(libc) -- in particular,
elf/Makefile no longer thinks we require a copy of unwind.c in
rtld-libc.a. (The older mechanism is preserved as a backstop.)
The bulk of the change is splitting up the files that define the
_nocancel I/O functions, so they don't also define the variants that
*are* cancellation points; after which, the existing logic for picking
out the bits of libc that need to be recompiled as part of ld.so Just
Works. I did this for all of the _nocancel functions, not just the
ones used by ld.so, for consistency.
fcntl was a little tricky because it's only a cancellation point for
certain opcodes (F_SETLKW(64), which can block), and the existing
__fcntl_nocancel wasn't applying the FCNTL_ADJUST_CMD hook, which
strikes me as asking for trouble, especially as the only nontrivial
definition of FCNTL_ADJUST_CMD (for powerpc64) changes F_*LK* opcodes.
To fix this, fcntl_common moves to fcntl_nocancel.c along with
__fcntl_nocancel, and changes its name to the extern (but hidden)
symbol __fcntl_nocancel_adjusted, so that regular fcntl can continue
calling it. __fcntl_nocancel now applies FCNTL_ADJUST_CMD; so that
both both fcntl.c and fcntl_nocancel.c can see it, the only nontrivial
definition moves from sysdeps/u/s/l/powerpc/powerpc64/fcntl.c to
.../powerpc64/sysdep.h and becomes entirely a macro, instead of a macro
that calls an inline function.
The nptl version of libpthread also changes a little, because its
"compat-routines" formerly included files that defined all the
_nocancel functions it uses; instead of continuing to duplicate them,
I exported the relevant ones from libc.so as GLIBC_PRIVATE. Since the
Linux fcntl.c calls a function defined by fcntl_nocancel.c, it can no
longer be used from libpthread.so; instead, introduce a custom
forwarder, pt-fcntl.c, and export __libc_fcntl from libc.so as
GLIBC_PRIVATE. The nios2-linux ABI doesn't include a copy of vfork()
in libpthread, and it was handling that by manipulating
libpthread-routines in .../linux/nios2/Makefile; it is cleaner to do
what other such ports do, and have a pt-vfork.S that defines no symbols.
Right now, it appears that Hurd does not implement _nocancel I/O, so
sysdeps/generic/not-cancel.h will forward everything back to the
regular functions. This changed the names of some of the functions
that sysdeps/mach/hurd/dl-sysdep.c needs to interpose.
* elf/dl-load.c, elf/dl-misc.c, elf/dl-profile.c, elf/rtld.c
* sysdeps/unix/sysv/linux/dl-sysdep.c
Include not-cancel.h. Use __close_nocancel instead of __close,
__open64_nocancel instead of __open, __read_nocancel instead of
__libc_read, and __write_nocancel instead of __libc_write.
* csu/check_fds.c (check_one_fd)
* sysdeps/posix/fdopendir.c (__fdopendir)
* sysdeps/posix/opendir.c (__alloc_dir): Use __fcntl_nocancel
instead of __fcntl and/or __libc_fcntl.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np)
* sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np)
* sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system):
Use __open64_nocancel instead of __open_nocancel.
* sysdeps/unix/sysv/linux/not-cancel.h: Move all of the
hidden_proto declarations to the end and issue them if either
IS_IN(libc) or IS_IN(rtld).
* sysdeps/unix/sysv/linux/Makefile [subdir=io] (sysdep_routines):
Add close_nocancel, fcntl_nocancel, nanosleep_nocancel,
open_nocancel, open64_nocancel, openat_nocancel, pause_nocancel,
read_nocancel, waitpid_nocancel, write_nocancel.
* io/Versions [GLIBC_PRIVATE]: Add __libc_fcntl,
__fcntl_nocancel, __open64_nocancel, __write_nocancel.
* posix/Versions: Add __nanosleep_nocancel, __pause_nocancel.
* nptl/pt-fcntl.c: New file.
* nptl/Makefile (pthread-compat-wrappers): Remove fcntl.
(libpthread-routines): Add pt-fcntl.
* include/fcntl.h (__fcntl_nocancel_adjusted): New function.
(__libc_fcntl): Remove attribute_hidden.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Call
__fcntl_nocancel_adjusted, not fcntl_common.
(__fcntl_nocancel): Move to new file fcntl_nocancel.c.
(fcntl_common): Rename to __fcntl_nocancel_adjusted; also move
to fcntl_nocancel.c.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Remove file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h:
Define FCNTL_ADJUST_CMD here, as a self-contained macro.
* sysdeps/unix/sysv/linux/close.c: Move __close_nocancel to...
* sysdeps/unix/sysv/linux/close_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/nanosleep.c: Move __nanosleep_nocancel to...
* sysdeps/unix/sysv/linux/nanosleep_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/open.c: Move __open_nocancel to...
* sysdeps/unix/sysv/linux/open_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/open64.c: Move __open64_nocancel to...
* sysdeps/unix/sysv/linux/open64_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/openat.c: Move __openat_nocancel to...
* sysdeps/unix/sysv/linux/openat_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/openat64.c: Move __openat64_nocancel to...
* sysdeps/unix/sysv/linux/openat64_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/pause.c: Move __pause_nocancel to...
* sysdeps/unix/sysv/linux/pause_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/read.c: Move __read_nocancel to...
* sysdeps/unix/sysv/linux/read_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/waitpid.c: Move __waitpid_nocancel to...
* sysdeps/unix/sysv/linux/waitpid_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/write.c: Move __write_nocancel to...
* sysdeps/unix/sysv/linux/write_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/nios2/Makefile: Don't override
libpthread-routines.
* sysdeps/unix/sysv/linux/nios2/pt-vfork.S: New file which
defines nothing.
* sysdeps/mach/hurd/dl-sysdep.c: Define __read instead of
__libc_read, and __write instead of __libc_write. Define
__open64 in addition to __open.
|
|
alloca for it may cause stack overflow. If the note is larger than
__MAX_ALLOCA_CUTOFF, use dynamically allocated memory to read it in.
2018-05-05 Paul Pluzhnikov <ppluzhnikov@google.com>
[BZ #20419]
* elf/dl-load.c (open_verify): Fix stack overflow.
* elf/Makefile (tst-big-note): New test.
* elf/tst-big-note-lib.S: New.
* elf/tst-big-note.c: New.
|
|
This looks like a post-exploitation hardening measure: If an attacker is
able to redirect execution flow, they could use that to load a DSO which
contains additional code (or perhaps make the stack executable).
However, the checks are not in the correct place to be effective: If
they are performed before the critical operation, an attacker with
sufficient control over execution flow could simply jump directly to
the code which performs the operation, bypassing the check. The check
would have to be executed unconditionally after the operation and
terminate the process in case a caller violation was detected.
Furthermore, in _dl_check_caller, there was a fallback reading global
writable data (GL(dl_rtld_map).l_map_start and
GL(dl_rtld_map).l_text_end), which could conceivably be targeted by an
attacker to disable the check, too.
Other critical functions (such as system) remain completely
unprotected, so the value of these additional checks does not appear
that large. Therefore this commit removes this functionality.
|
|
* elf/dl-load.c (decompose_rpath): Check for rpath emptiness before
making a copy of it.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
The fillin_rpath function in elf/dl-load.c loops over each RPATH or
RUNPATH tokens and interprets empty tokens as the current directory
("./"). In practice the check for empty token is done *after* the
dynamic string token expansion. The expansion process can return an
empty string for the $ORIGIN token if __libc_enable_secure is set
or if the path of the binary can not be determined (/proc not mounted).
Fix that by moving the check for empty tokens before the dynamic string
token expansion. In addition, check for NULL pointer or empty strings
return by expand_dynamic_string_token.
The above changes highlighted a bug in decompose_rpath, an empty array
is represented by the first element being NULL at the fillin_rpath
level, but by using a -1 pointer in decompose_rpath and other functions.
Changelog:
[BZ #22625]
* elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic
string token expansion. Check for NULL pointer or empty string possibly
returned by expand_dynamic_string_token.
(decompose_rpath): Check for empty path after dynamic string
token expansion.
|
|
is_path argument is no longer used and could be safely removed.
* elf/dl-dst.h (DL_DST_COUNT): Remove is_path argument, all callers
updated.
* elf/dl-load.c (is_dst, _dl_dst_count, _dl_dst_substitute,
expand_dynamic_string_token): Likewise.
* sysdeps/generic/ldsodefs.h (_dl_dst_count, _dl_dst_substitute): Remove
is_path argument.
|
|
is_dst is called either by _dl_dst_count or by _dl_dst_substitute.
_dl_dst_count is called by DL_DST_COUNT only.
DL_DST_COUNT is called either by expand_dst with is_path == 0
or by expand_dynamic_string_token.
_dl_dst_substitute is called either from expand_dst with is_path == 0
or from expand_dynamic_string_token.
The latter function is called either from _dl_map_object with is_path == 0
or from fillin_rpath with is_path == 1 and name containing no ':'.
In any case (is_path && name[i] == ':') is always false and all code
depending on it can be safely removed.
* elf/dl-load.c (is_dst): Remove checks that is_path is set and name
contains ':', and all code depending on these checks.
|
|
There are just two users of _dl_dst_substitute: one is expand_dst that
sets is_path argument to 0, another one is expand_dynamic_string_token.
The latter function also has just two users: one is _dl_map_object that
sets is_path argument to 0, another one is fillin_rpath that sets
is_path argument to 1 and name argument contains no ':'.
In any case (is_path && name[i] == ':') is always false and all code
depending on it can be safely removed.
* elf/dl-load.c (_dl_dst_substitute): Remove checks that is_path
is set and name contains ':', and all code depending on these checks.
|
|
There are just two users of fillin_rpath: one is decompose_rpath that
sets check_trusted argument to 0, another one is _dl_init_paths that
sets check_trusted argument to __libc_enable_secure and invokes
fillin_rpath only when LD_LIBRARY_PATH is non-empty.
Starting with commit
glibc-2.25.90-512-gf6110a8fee2ca36f8e2d2abecf3cba9fa7b8ea7d,
LD_LIBRARY_PATH is ignored for __libc_enable_secure executables,
so check_trusted argument of fillin_rpath is always zero.
* elf/dl-load.c (is_trusted_path): Remove.
(fillin_rpath): Remove check_trusted argument and its use,
all callers changed.
|
|
Starting with commit
glibc-2.18.90-470-g2a939a7e6d81f109d49306bc2e10b4ac9ceed8f9 that
introduced substitution of dynamic string tokens in fillin_rpath,
_dl_init_paths invokes _dl_dst_substitute for $LD_LIBRARY_PATH twice:
the first time it's called directly, the second time the result
is passed on to fillin_rpath which calls expand_dynamic_string_token
which in turn calls _dl_dst_substitute, leading to the following
behaviour:
$ mkdir -p /tmp/'$ORIGIN' && cd /tmp/'$ORIGIN' &&
echo 'int main(){}' |gcc -xc - &&
strace -qq -E LD_LIBRARY_PATH='$ORIGIN' -e /open ./a.out
open("/tmp//tmp/$ORIGIN/tls/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/tls/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
Fix this by removing the direct _dl_dst_substitute invocation.
* elf/dl-load.c (_dl_init_paths): Remove _dl_dst_substitute preparatory
code and invocation.
|
|
|
|
|
|
A note header has 3 4-bytes fields, followed by note name and note
descriptor. According to gABI, in a note entry, the note name field,
not note name size, is padded for the note descriptor. And the note
descriptor field, not note descriptor size, is padded for the next
note entry. Notes are aligned to 4 bytes in 32-bit objects and 8 bytes
in 64-bit objects.
For all GNU notes, the name is "GNU" which is 4 bytes. They have the
same format in the first 16 bytes in both 32-bit and 64-bit objects.
They differ by note descriptor size and note type. So far, .note.ABI-tag
and .note.gnu.build-id notes are always aligned to 4 bytes. The exsting
codes compute the note size by aligning the note name size and note
descriptor size to 4 bytes. It happens to produce the same value as
the actual note size by luck since the name size is 4 and offset of the
note descriptor is 16. But it will produce the wrong size when note
alignment is 8 bytes in 64-bit objects.
This patch defines ELF_NOTE_DESC_OFFSET and ELF_NOTE_NEXT_OFFSET to
properly compute offsets of note descriptor and next note. It uses
alignment of PT_NOTE segment to support both 4-byte and 8-byte note
alignments in 64-bit objects. To handle PT_NOTE segments with
incorrect alignment, which may lead to an infinite loop, if segment
alignment is less than 4, we treate alignment as 4 bytes since some
note segments have 0 or 1 byte alignment.
[BZ #22370]
* elf/dl-hwcaps.c (ROUND): Removed.
(_dl_important_hwcaps): Replace ROUND with ELF_NOTE_DESC_OFFSET
and ELF_NOTE_NEXT_OFFSET.
* elf/dl-load.c (ROUND): Removed.
(open_verify): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* elf/readelflib.c (ROUND): Removed.
(process_elf_file): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* include/elf.h [!_ISOMAC]: Include <libc-pointer-arith.h>.
[!_ISOMAC] (ELF_NOTE_DESC_OFFSET): New.
[!_ISOMAC] (ELF_NOTE_NEXT_OFFSET): Likewise.
|
|
ELF objects generated with "objcopy --only-keep-debug" have
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
DYNAMIC 0x0+e28 0x0+200e40 0x0+200e40 0x0+ 0x0+1a0 RW 0x8
with 0 file size. ld.so should skip such PT_DYNAMIC segments.
Without a PT_DYNAMIC segment the loading of the shared object will
fail, and therefore ldd on such objects will also fail instead of
crashing. This provides better diagnostics for tooling that is
attempting to inspect the invalid shared objects which may just
contain debug information.
[BZ #22101]
* elf/Makefile (tests): Add tst-debug1.
($(objpfx)tst-debug1): New.
($(objpfx)tst-debug1.out): Likewise.
($(objpfx)tst-debug1mod1.so): Likewise.
* elf/dl-load.c (_dl_map_object_from_fd): Skip PT_DYNAMIC segment
with p_filesz == 0.
* elf/tst-debug1.c: New file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
|
|
|
|
libc.so uses TLS data, so when dlopen is called later, the
TLS data structures have already been initialized.
|
|
|
|
|
|
* elf/dl-load.c (_dl_map_object_from_fd): Add additional parameter
for original name of the DSO. Add it to the name list of the DSO
if it is actually given.
(_dl_map_object): Keep track of whether an audit module rewrote
the file name. If yes, pass the original name to
_dl_map_object_from_fd in a new parameter, otherwise NULL. When
debugging is enabled, log the change of the file name.
* sysdeps/mach/hur/dl-sysdep.c: Adjust commented-out call to
_dl_map_object_from_fd.
* elf/Makefile: Build and run tst-audit11 and tst-audit12.
* elf/tst-audit11.c: New file
* elf/tst-auditmod11.c: New file.
* elf/tst-audit11mod1.c: New file.
* elf/tst-audit11mod2.c: New file.
* elf/tst-audit11mod2.map: New file.
* elf/tst-audit12.c: New file
* elf/tst-auditmod12.c: New file.
* elf/tst-audit12mod1.c: New file.
* elf/tst-audit12mod2.c: New file.
* elf/tst-audit12mod2.map: New file.
* elf/tst-audit12mod3.c: New file.
|
|
Cleanup _dl_map_object_from_fd to make it clear exactly
what we're doing with the mappings i.e. extending the the
start of the map down to a page boundary, extending the
end of the map up to a page boundary, and offset itself
also to page boundary. The result is much easier to read
as expected from the ALIGN_* cleanups.
|
|
|
|
|
|
The ability to recursively call dlopen is useful for malloc
implementations that wish to load other dynamic modules that
implement reentrant/AS-safe functions to use in their own
implementation.
Given that a user malloc implementation may be called by an
ongoing dlopen to allocate memory the user malloc
implementation interrupts dlopen and if it calls dlopen again
that's a reentrant call.
This patch fixes the issues with the ld.so.cache mapping
and the _r_debug assertion which prevent this from working
as expected.
See:
https://sourceware.org/ml/libc-alpha/2014-12/msg00446.html
|
|
|
|
This hook can be used to perform additional compatibility checks
between shared libraries by inspecting custom program header
information.
* elf/dl-machine-reject-phdr.h: New file.
* elf/dl-load.c: #include that.
(open_verify): Call elf_machine_reject_phdr_p and ignore the file
if that returned true.
|
|
During a refactoring pass several repeated blocks of code in dl-load.c
were turned into a call to a local function named local_strdup. There
is no need for local_strdup, and the routines should instead call
__strdup. This change does just that. We call the internal symbol
__strdup because calling strdup is unsafe. The user might be
using a standard that doesn't include strdup and may have defined this
symbol in their application. During a static link we might reference
the user defined symbol and crash if it doesn't implement a standards
conforming strdup. The resulting code is simpler to understand, and
makes it easier to debug.
No regressions on x86_64.
2014-10-28 Carlos O'Donell <carlos@redhat.com>
* dl-load.c (local_strdup): Remove.
(expand_dynamic_string_token): Use __strdup.
(decompose_rpath): Likewise.
(_dl_map_object): Likewise.
|
|
Continuing the removal of the obsolete INTDEF / INTVARDEF / INTUSE
mechanism, this patch replaces its use for __libc_enable_secure with
the use of rtld_hidden_data_def and rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-sysdep.c (__libc_enable_secure): Use rtld_hidden_data_def
instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* sysdeps/mach/hurd/dl-sysdep.c (__libc_enable_secure): Use
rtld_hidden_data_def instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* elf/dl-deps.c (expand_dst): Likewise.
* elf/dl-load.c (_dl_dst_count): Likewise.
(_dl_dst_substitute): Likewise.
(decompose_rpath): Likewise.
(_dl_init_paths): Likewise.
(open_path): Likewise.
(_dl_map_object): Likewise.
* elf/rtld.c (dl_main): Likewise.
(process_dl_audit): Likewise.
(process_envvars): Likewise.
* include/unistd.h [IS_IN_rtld] (__libc_enable_secure_internal):
Remove declaration.
(__libc_enable_secure): Use rtld_hidden_proto.
|
|
|
|
|
|
|
