aboutsummaryrefslogtreecommitdiff
path: root/conform
AgeCommit message (Collapse)AuthorFilesLines
2014-06-11conformtest: clean up POSIX expectations for sys/mman.h, sys/stat.h, ↵Joseph Myers3-2/+9
sys/types.h. Continuing the series of patches to clean up conformtest expectations for "POSIX" (1995/6) based on review of the expectations against the standard, this patch cleans up expectations for sys/mman.h, sys/stat.h and sys/types.h. Tested x86_64; no new XFAILs needed. * conform/data/sys/mman.h-data [POSIX] (size_t): Do not require type. [POSIX] (off_t): Likewise. * conform/data/sys/stat.h-data (S_IRGRP): Require constant. [POSIX] (S_ISBLK): Require macro. [POSIX] (S_ISCHR): Likewise. [POSIX] (S_ISDIR): Likewise. [POSIX] (S_ISFIFO): Likewise. [POSIX] (S_ISREG): Likewise. [POSIX || XPG3 || XPG4 || UNIX98] (S_TYPEISTMO): Do not list optional-macro. * conform/data/sys/types.h-data [POSIX] (blkcnt_t): Do not require type. [POSIX] (time_t): Likewise. [POSIX] (timer_t): Likewise.
2014-06-09conformtest: clean up POSIX expectations for termios.h, time.h.Joseph Myers2-3/+13
Continuing the series of patches to clean up conformtest expectations for "POSIX" (1995/6) based on review of the expectations against the standard, this patch cleans up expectations for termios.h and time.h. Tested x86_64; no new XFAILs needed. * conform/data/termios.h-data [POSIX] (IUCLC): Do not expect constant. [POSIX] (IXANY): Likewise. [POSIX] (OLCUC): Likewise. [POSIX || POSIX2008] (CBAUD): Do not allow. [POSIX || POSIX2008] (DEFECHO): Likewise. [POSIX || POSIX2008] (ECHOCTL): Likewise. [POSIX || POSIX2008] (ECHOKE): Likewise. [POSIX || POSIX2008] (ECHOPRT): Likewise. [POSIX || POSIX2008] (EXTA): Likewise. [POSIX || POSIX2008] (EXTB): Likewise. [POSIX || POSIX2008] (FLUSHO): Likewise. [POSIX || POSIX2008] (LOBLK): Likewise. [POSIX || POSIX2008] (PENDIN): Likewise. [POSIX || POSIX2008] (SWTCH): Likewise. [POSIX || POSIX2008] (VDISCARD): Likewise. [POSIX || POSIX2008] (VDSUSP): Likewise. [POSIX || POSIX2008] (VLNEXT): Likewise. [POSIX || POSIX2008] (VREPRINT): Likewise. [POSIX || POSIX2008] (VSTATUS): Likewise. [POSIX || POSIX2008] (VWERASE): Likewise. (B*): Change to B[0123456789]*. * conform/data/time.h-data [POSIX || UNIX98] (CLOCK_PROCESS_CPUTIME_ID): Do not expect constant. [POSIX || UNIX98] (CLOCK_THREAD_CPUTIME_ID): Likewise. [POSIX || UNIX98] (CLOCK_MONOTONIC): Likewise. [POSIX] (tm_*): Do not allow.
2014-05-23Define TSVTX in tar.h for older POSIX (bug 16978).Joseph Myers1-1/+0
As noted in bug 16978, older POSIX versions include in the specified contents of <tar.h>, with only the 2001 edition introducing the notion of XSI-conditional definitions and conditioning that definition. Thus, this macro should be defined for !__USE_XOPEN2K as well as for __USE_XOPEN, and this patch duly defines it in that case. Tested x86_64. [BZ #16978] * posix/tar.h [!__USE_XOPEN2K] (TSVTX): Define macro. * conform/Makefile (test-xfail-POSIX/tar.h/conform): Remove variable.
2014-04-30conformtest: clean up POSIX expectations for stdlib.h, string.h.Joseph Myers2-3/+3
Continuing the series of patches to clean up conformtest expectations for "POSIX" (1995/6) based on review of the expectations against the standard, this patch cleans up expectations for stdlib.h and string.h. Tested x86_64; no new XFAILs needed. * conform/data/stdlib.h-data [POSIX] (stddef.h): Do not allow header inclusion. [POSIX] (limits.h): Likewise. [POSIX] (math.h): Likewise. [POSIX] (sys/wait.h): Likewise. * conform/data/string.h-data [POSIX || UNIX98] (strtok_r): Require function. [POSIX] (stddef.h): Do not allow header inclusion.
2014-03-18Add stardard definition on conform processingAdhemerval Zanella1-2/+1
This patch adds the -std=c99 option when preprocessing the data files from the conform testcases. It fixes an issue where the compiler may split the 'macro bool' defition from stdbool.h-data in two lines and thus breaking the conform script.
2014-03-07Fix POSIX namespace for <bits/siginfo.h> (bug 16674).Joseph Myers1-2/+0
<bits/siginfo.h> causes symbols ILL_*, FPE_*, SEGV_* BUS_*, CLD_*, POLL_* and TRAP_* to be exposed in <signal.h> (and <sys/wait.h>), even though those symbols are not in non-XSI POSIX before POSIX.1-2008 and even in POSIX.1-2008 the TRAP_* symbols are XSI-only. This patch conditions the symbols appropriately in the various <bits/siginfo.h> implementations (various <signal.h> and <sys/wait.h> conformtest issues remain for standards other than POSIX (1995/6)). Tested x86_64. [BZ #16674] * bits/siginfo.h (ILL_ILLOPC): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (ILL_BADIADDR): Likewise. (ILL_BREAK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (FPE_DECOVF): Likewise. (FPE_DECDIV): Likewise. (FPE_DECERR): Likewise. (FPE_INVASC): Likewise. (FPE_INVDEC): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (SEGV_PSTKOVF): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (TRAP_BRANCH): Likewise. (TRAP_HWBKPT): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/mips/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/s390/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/tile/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (ILL_DBLFLT): Likewise. (ILL_HARDWALL): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/x86/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * conform/Makefile (test-xfail-POSIX/signal.h/conform): Remove. (test-xfail-POSIX/sys/wait.h/conform): Likewise.
2014-03-07Include all of <time.h> from <sched.h> for older standards (bug 16670).Joseph Myers1-2/+0
This patch fixes one of the header namespace issues shown up by conformtest, <sched.h> failing to expose all symbols from <time.h> as required by older standards. The patch keeps the existing behavior if __USE_XOPEN2K is defined (the default; POSIX.1-2001 was the version that made it optional to expose these symbols), but ensures that all the symbols from <time.h> are exposed if an older standard is selected. Tested x86_64. [BZ #16670] * posix/sched.h [!__USE_XOPEN2K] (__need_time_t): Don't define before #include of <time.h>. [!__USE_XOPEN2K] (__need_timespec): Likewise. * conform/Makefile (test-xfail-POSIX/sched.h/conform): Remove. (test-xfail-UNIX98/sched.h/conform): Likewise.
2014-03-07conformtest: split up running of tests from makefile.Joseph Myers3-39/+307
This patch changes the logic by which header conformance tests are run so that the makefiles run the tests for each (standard, header) pair separately rather than as a single test (there are 518 such pairs being tested at present). Since these tests are slow and previously couldn't be run in parallel, this obviously speeds up the whole test run significantly when using parallel testing. There are other benefits. These tests can now be marked as expected to fail at the level of (standard, header) pairs, meaning that regressions introduced by a header change are much more likely to be spotted (of course, such a regression could be a bug in the header or in the expectations, most of which have not been properly checked against the relevant standards). The patch introduces lists in conform/Makefile of the headers to test for each standard, with a new (quick) test for each standard that the list agrees with the set of headers for which there are in fact nonempty expectations for that standard. This means that each of the 518 pairs being tested is actually something meaningful to test rather than a null test. I also hope to use these lists of headers in various standards in future tests for namespace violations where a function in a standard is implemented to call a non-reserved name for a function outside that standard. Although there are a lot of tests now marked as expected to fail, I expect most of those to be easy to fix (whether with fixes to the expectations, the headers or both - if fixing a header bug, of course file it in Bugzilla first); only a limited number are likely to reflect actual missing features in glibc. Tested x86_64 (GCC 4.7 branch). It's quite possible some failures vary from platform to platform, in which case either additional XFAILs can be added here, or platform-specific header bugs (if applicable) the failures show up can be fixed. I made XFAILs unconditional for tests that should only fail for GCC 4.6 and earlier; we could make the GCC version available in the makefiles and condition these, but simply moving the XFAILing to a finer granularity seems a clear improvement on the previous state of the whole of conformtest being XFAILed. * Makeconfig (test-xfail-name): New variable. (evaluate-test): Use $(test-xfail-name) instead of $(@F:.out=) to compute variable name for expected failures. * conform/Makefile (conformtest-headers-data): New variable. (conformtest-standards): Likewise. (conformtest-headers-ISO): Likewise. (conformtest-headers-ISO99): Likewise. (conformtest-headers-ISO11): Likewise. (conformtest-headers-POSIX): Likewise. (conformtest-headers-XPG3): Likewise. (conformtest-headers-XPG4): Likewise. (conformtest-headers-UNIX98): Likewise. (conformtest-headers-XOPEN2K): Likewise. (conformtest-headers-POSIX2008): Likewise. (conformtest-headers-XOPEN2K8): Likewise. (conformtest-header-list-base): Likewise. (conformtest-header-list-tests): Likewise. (conformtest-header-base): Likewise. (conformtest-header-tests): Likewise. (tests-special): Add $(conformtest-header-list-tests). If [$(fast-check) && !$(cross-compiling)], add $(conformtest-header-tests) instead of $(objpfx)run-conformtest.out. (generated): Add $(conformtest-header-list-base). If [$(fast-check) && !$(cross-compiling)], add $(conformtest-header-base). Remove previous setting. ($(conformtest-header-list-tests)): New target. (test-xfail-run-conformtest): Remove variable. ($(objpfx)run-conformtest.out): Remove target. (test-xfail-ISO11/complex.h/conform): New variable. (test-xfail-ISO11/stdalign.h/conform): Likewise. (test-xfail-ISO11/stdnoreturn.h/conform): Likewise. (test-xfail-XPG3/varargs.h/conform): Likewise. (test-xfail-XPG4/varargs.h/conform): Likewise. (test-xfail-UNIX98/varargs.h/conform): Likewise. (test-xfail-XPG4/ndbm.h/conform): Likewise. (test-xfail-UNIX98/ndbm.h/conform): Likewise. (test-xfail-XOPEN2K/ndbm.h/conform): Likewise. (test-xfail-XOPEN2K8/ndbm.h/conform): Likewise. (test-xfail-XPG3/fcntl.h/conform): Likewise. (test-xfail-XPG3/ftw.h/conform): Likewise. (test-xfail-XPG3/grp.h/conform): Likewise. (test-xfail-XPG3/langinfo.h/conform): Likewise. (test-xfail-XPG3/limits.h/conform): Likewise. (test-xfail-XPG3/pwd.h/conform): Likewise. (test-xfail-XPG3/search.h/conform): Likewise. (test-xfail-XPG3/signal.h/conform): Likewise. (test-xfail-XPG3/stdio.h/conform): Likewise. (test-xfail-XPG3/stdlib.h/conform): Likewise. (test-xfail-XPG3/string.h/conform): Likewise. (test-xfail-XPG3/sys/ipc.h/conform): Likewise. (test-xfail-XPG3/sys/msg.h/conform): Likewise. (test-xfail-XPG3/sys/sem.h/conform): Likewise. (test-xfail-XPG3/sys/shm.h/conform): Likewise. (test-xfail-XPG3/sys/stat.h/conform): Likewise. (test-xfail-XPG3/sys/types.h/conform): Likewise. (test-xfail-XPG3/sys/wait.h/conform): Likewise. (test-xfail-XPG3/termios.h/conform): Likewise. (test-xfail-XPG3/time.h/conform): Likewise. (test-xfail-XPG3/unistd.h/conform): Likewise. (test-xfail-XPG4/arpa/inet.h/conform): Likewise. (test-xfail-XPG4/fcntl.h/conform): Likewise. (test-xfail-XPG4/langinfo.h/conform): Likewise. (test-xfail-XPG4/netdb.h/conform): Likewise. (test-xfail-XPG4/netinet/in.h/conform): Likewise. (test-xfail-XPG4/signal.h/conform): Likewise. (test-xfail-XPG4/stdio.h/conform): Likewise. (test-xfail-XPG4/stdlib.h/conform): Likewise. (test-xfail-XPG4/stropts.h/conform): Likewise. (test-xfail-XPG4/sys/ipc.h/conform): Likewise. (test-xfail-XPG4/sys/msg.h/conform): Likewise. (test-xfail-XPG4/sys/sem.h/conform): Likewise. (test-xfail-XPG4/sys/shm.h/conform): Likewise. (test-xfail-XPG4/sys/socket.h/conform): Likewise. (test-xfail-XPG4/sys/stat.h/conform): Likewise. (test-xfail-XPG4/sys/time.h/conform): Likewise. (test-xfail-XPG4/sys/types.h/conform): Likewise. (test-xfail-XPG4/sys/wait.h/conform): Likewise. (test-xfail-XPG4/termios.h/conform): Likewise. (test-xfail-XPG4/ucontext.h/conform): Likewise. (test-xfail-XPG4/unistd.h/conform): Likewise. (test-xfail-XPG4/utmpx.h/conform): Likewise. (test-xfail-POSIX/sched.h/conform): Likewise. (test-xfail-POSIX/signal.h/conform): Likewise. (test-xfail-POSIX/sys/wait.h/conform): Likewise. (test-xfail-POSIX/tar.h/conform): Likewise. (test-xfail-UNIX98/arpa/inet.h/conform): Likewise. (test-xfail-UNIX98/fcntl.h/conform): Likewise. (test-xfail-UNIX98/langinfo.h/conform): Likewise. (test-xfail-UNIX98/netdb.h/conform): Likewise. (test-xfail-UNIX98/netinet/in.h/conform): Likewise. (test-xfail-UNIX98/sched.h/conform): Likewise. (test-xfail-UNIX98/signal.h/conform): Likewise. (test-xfail-UNIX98/stdio.h/conform): Likewise. (test-xfail-UNIX98/stdlib.h/conform): Likewise. (test-xfail-UNIX98/stropts.h/conform): Likewise. (test-xfail-UNIX98/sys/ipc.h/conform): Likewise. (test-xfail-UNIX98/sys/msg.h/conform): Likewise. (test-xfail-UNIX98/sys/sem.h/conform): Likewise. (test-xfail-UNIX98/sys/shm.h/conform): Likewise. (test-xfail-UNIX98/sys/socket.h/conform): Likewise. (test-xfail-UNIX98/sys/time.h/conform): Likewise. (test-xfail-UNIX98/sys/wait.h/conform): Likewise. (test-xfail-UNIX98/ucontext.h/conform): Likewise. (test-xfail-UNIX98/unistd.h/conform): Likewise. (test-xfail-UNIX98/utmpx.h/conform): Likewise. (test-xfail-XOPEN2K/aio.h/conform): Likewise. (test-xfail-XOPEN2K/arpa/inet.h/conform): Likewise. (test-xfail-XOPEN2K/fcntl.h/conform): Likewise. (test-xfail-XOPEN2K/langinfo.h/conform): Likewise. (test-xfail-XOPEN2K/math.h/conform): Likewise. (test-xfail-XOPEN2K/mqueue.h/conform): Likewise. (test-xfail-XOPEN2K/netdb.h/conform): Likewise. (test-xfail-XOPEN2K/netinet/in.h/conform): Likewise. (test-xfail-XOPEN2K/semaphore.h/conform): Likewise. (test-xfail-XOPEN2K/signal.h/conform): Likewise. (test-xfail-XOPEN2K/stdarg.h/conform): Likewise. (test-xfail-XOPEN2K/stdio.h/conform): Likewise. (test-xfail-XOPEN2K/stropts.h/conform): Likewise. (test-xfail-XOPEN2K/sys/ipc.h/conform): Likewise. (test-xfail-XOPEN2K/sys/msg.h/conform): Likewise. (test-xfail-XOPEN2K/sys/sem.h/conform): Likewise. (test-xfail-XOPEN2K/sys/shm.h/conform): Likewise. (test-xfail-XOPEN2K/sys/socket.h/conform): Likewise. (test-xfail-XOPEN2K/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K/termios.h/conform): Likewise. (test-xfail-XOPEN2K/tgmath.h/conform): Likewise. (test-xfail-XOPEN2K/ucontext.h/conform): Likewise. (test-xfail-XOPEN2K/utmpx.h/conform): Likewise. (test-xfail-POSIX2008/arpa/inet.h/conform): Likewise. (test-xfail-POSIX2008/fcntl.h/conform): Likewise. (test-xfail-POSIX2008/netdb.h/conform): Likewise. (test-xfail-POSIX2008/netinet/in.h/conform): Likewise. (test-xfail-POSIX2008/signal.h/conform): Likewise. (test-xfail-POSIX2008/stropts.h/conform): Likewise. (test-xfail-POSIX2008/sys/socket.h/conform): Likewise. (test-xfail-POSIX2008/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/arpa/inet.h/conform): Likewise. (test-xfail-XOPEN2K8/fcntl.h/conform): Likewise. (test-xfail-XOPEN2K8/limits.h/conform): Likewise. (test-xfail-XOPEN2K8/math.h/conform): Likewise. (test-xfail-XOPEN2K8/netdb.h/conform): Likewise. (test-xfail-XOPEN2K8/netinet/in.h/conform): Likewise. (test-xfail-XOPEN2K8/signal.h/conform): Likewise. (test-xfail-XOPEN2K8/stdio.h/conform): Likewise. (test-xfail-XOPEN2K8/stropts.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/ipc.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/msg.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/select.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/sem.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/shm.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/socket.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/time.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/termios.h/conform): Likewise. (test-xfail-XOPEN2K8/tgmath.h/conform): Likewise. (test-xfail-XOPEN2K8/utmpx.h/conform): Likewise. (conformtest-cc-flags): Likewise. ($(conformtest-header-tests): New target. * conform/check-header-lists.sh: New file. * conform/run-conformtest.sh: Remove.
2014-03-07conformtest: clean up POSIX expectations for semaphore.h, signal.h, tar.h.Joseph Myers4-38/+64
Continuing the series of patches to clean up conformtest expectations for "POSIX" (1995/6) based on review of the expectations against the standard, this patch cleans up those for semaphore.h, signal.h and tar.h (including various corrections for other standards for the expectations affected by this patch). Tested x86_64. (Some of the failures for signal.h shown up by this patch correcting expectations for that header are among the reasons for posix/annexc being expected to fail. The goal is for conformtest eventually to replace posix/annexc and stdlib/isomac once it has all relevant functionality, and for the loop over standards and headers in conformtest to convert to separate makefile targets for each combination, so they can be run in parallel and so that xfails can be more specific than the present xfailing of the whole of conformtest.) * conform/conformtest.pl: Allow ' and \ in values given for constants. * conform/data/semaphore.h-data [POSIX] (fcntl.h): Allow header inclusion. [POSIX] (sys/types.h): Likewise. [POSIX2008 || XOPEN2K8] (sys/types.h): Don't allow header inclusion. [POSIX || UNIX98 || XOPEN2K] (time.h): Don't allow header inclusion. * conform/data/signal.h-data (SIGIO): Remove expectation. [XPG3] (SIGBUS): Do not expect. [POSIX || XPG3] (SIGPOLL): Likewise. [POSIX || XPG3] (SIGPROF): Likewise. [POSIX || XPG3] (SIGSYS): Likewise. [XPG3] (SIGTRAP): Likewise. [POSIX || XPG3] (SIGURG): Likewise. [POSIX || XPG3] (SIGVTALRM): Likewise. [POSIX || XPG3] (SIGXCPU): Likewise. [POSIX || XPG3] (SIGXFSZ): Likewise. [POSIX] (SA_SIGINFO): Expect. [XPG3] (siginfo_t): Do not expect type or contents. [POSIX] (si_pid): Do not expect element. [POSIX] (si_uid): Likewise. [POSIX] (si_addr): Likewise. [POSIX] (si_status): Likewise. [POSIX] (si_band): Likewise. [XPG4] (si_value): Likewise. [POSIX || XPG3] (ILL_ILLOPC): Do not expect. [POSIX || XPG3] (ILL_ILLOPN): Likewise. [POSIX || XPG3] (ILL_ILLADR): Likewise. [POSIX || XPG3] (ILL_ILLTRP): Likewise. [POSIX || XPG3] (ILL_PRVOPC): Likewise. [POSIX || XPG3] (ILL_PRVREG): Likewise. [POSIX || XPG3] (ILL_COPROC): Likewise. [POSIX || XPG3] (ILL_BADSTK): Likewise. [POSIX || XPG3] (FPE_INTDIV): Likewise. [POSIX || XPG3] (FPE_INTOVF): Likewise. [POSIX || XPG3] (FPE_FLTDIV): Likewise. [POSIX || XPG3] (FPE_FLTOVF): Likewise. [POSIX || XPG3] (FPE_FLTUND): Likewise. [POSIX || XPG3] (FPE_FLTRES): Likewise. [POSIX || XPG3] (FPE_FLTINV): Likewise. [POSIX || XPG3] (FPE_FLTSUB): Likewise. [POSIX || XPG3] (SEGV_MAPERR): Likewise. [POSIX || XPG3] (SEGV_ACCERR): Likewise. [POSIX || XPG3] (BUS_ADRALN): Likewise. [POSIX || XPG3] (BUS_ADRERR): Likewise. [POSIX || XPG3] (BUS_OBJERR): Likewise. [POSIX || XPG3] (CLD_EXITED): Likewise. [POSIX || XPG3] (CLD_KILLED): Likewise. [POSIX || XPG3] (CLD_DUMPED): Likewise. [POSIX || XPG3] (CLD_TRAPPED): Likewise. [POSIX || XPG3] (CLD_STOPPED): Likewise. [POSIX || XPG3] (CLD_CONTINUED): Likewise. [POSIX || XPG3] (POLL_IN): Likewise. [POSIX || XPG3] (POLL_OUT): Likewise. [POSIX || XPG3] (POLL_MSG): Likewise. [POSIX || XPG3] (POLL_ERR): Likewise. [POSIX || XPG3] (POLL_PRI): Likewise. [POSIX || XPG3] (POLL_HUP): Likewise. [POSIX || XPG3 || POSIX2008] (TRAP_BRKPT): Likewise. [POSIX || XPG3 || POSIX2008] (TRAP_TRACE): Likewise. (SIG*): Do not allow. [XPG3] (si_*): Likewise. [XPG3] (SI_*): Likewise. [XPG3 || XPG4] (sigev_*): Likewise. [XPG3 || XPG4] (SIGEV_*): Likewise. [XPG3 || XPG4] (sival_*): Likewise. [POSIX || XPG3 || XPG4] (uc_*): Likewise. [POSIX || XPG3] (BUS_*): Likewise. [POSIX || XPG3] (CLD_*): Likewise. [POSIX || XPG3] (FPE_*): Likewise. [POSIX || XPG3] (ILL_*): Likewise. [POSIX || XPG3] (POLL_*): Likewise. [POSIX || XPG3] (SEGV_*): Likewise. [POSIX || XPG3 || POSIX2008] (SS_*): Likewise. [POSIX || XPG3 || POSIX2008] (SV_*): Likewise. [POSIX || XPG3 || POSIX2008] (TRAP_*): Likewise. [POSIX || XPG3 || POSIX2008] (ss_*): Likewise. [POSIX || XPG3 || POSIX2008] (sv_*): Likewise. * conform/data/tar.h-data (TMAGLEN): Use macro-int-constant. Specify type and value. (TVERSLEN): Likewise. (REGTYPE): Likewise. (AREGTYPE): Likewise. (LNKTYPE): Likewise. (SYMTYPE): Likewise. (CHRTYPE): Likewise. (BLKTYPE): Likewise. (DIRTYPE): Likewise. (FIFOTYPE): Likewise. (CONTTYPE): Likewise. (TSUID): Likewise. (TSGID): Likewise. (TSVTX): Likewise. (TUREAD): Likewise. (TUWRITE): Likewise. (TUEXEC): Likewise. (TGREAD): Likewise. (TGWRITE): Likewise. (TGEXEC): Likewise. (TOREAD): Likewise. (TOWRITE): Likewise. (TOEXEC): Likewise. [POSIX] (TSVTX): Expect constant.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers1-3/+3
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-06conformtest: correct set of standards for which more headers are tested.Joseph Myers4-4/+4
Continuing the corrections to which headers conformtest tests for which standards, this patch corrects conformtest mistakes regarding which headers to test for the remaining standards (XOPEN2K POSIX2008 XOPEN2K8). Tested x86_64. 2014-03-05 Joseph Myers <joseph@codesourcery.com> * conform/data/netinet/tcp.h-data [POSIX2008 || XOPEN2K8]: Enable whole file. * conform/data/sys/timeb.h-data [POSIX2008 || XOPEN2K8]: Disable whole file. * conform/data/sys/uio.h-data [POSIX2008]: Likewise. * conform/data/ucontext.h-data [POSIX2008 || XOPEN2K8]: Likewise.
2014-03-06conformtest: correct set of standards for which some headers are tested.Joseph Myers26-26/+26
Reviewing the sets of headers for which conformtest has expectations for various standards showed up cases where headers had expectations for standards not including those headers, or were missing expectations for a standard that did include the header. This patch fixes easy cases of this (largely disabling tests for standards for which they are inapplicable). Tested x86_64. * conform/data/aio.h-data [XPG3 || XPG4]: Disable whole file. * conform/data/arpa/inet.h-data [XPG3]: Likewise. * conform/data/dlfcn.h-data [XPG3 || XPG4]: Likewise. * conform/data/fmtmsg.h-data [XPG3]: Likewise. * conform/data/libgen.h-data [XPG3]: Likewise. * conform/data/mqueue.h-data [XPG3 || XPG4]: Likewise. * conform/data/ndbm.h-data [XPG3]: Likewise. * conform/data/net/if.h-data [XPG3 || XPG4 || UNIX98]: Likewise. * conform/data/netdb.h-data [XPG3]: Likewise. * conform/data/netinet/in.h-data [XPG3]: Likewise. * conform/data/poll.h-data [XPG3]: Likewise. * conform/data/spawn.h-data [XPG3 || XPG4 || UNIX98]: Likewise. * conform/data/strings.h-data [XPG3]: Likewise. * conform/data/stropts.h-data [XPG3]: Likewise. * conform/data/sys/mman.h-data [XPG3]: Likewise. * conform/data/sys/resource.h-data [XPG3]: Likewise. * conform/data/sys/select.h-data [XPG3 || XPG4 || UNIX98]: Likewise. * conform/data/sys/statvfs.h-data [XPG3]: Likewise. * conform/data/sys/time.h-data [XPG3]: Likewise. * conform/data/sys/timeb.h-data [XPG3]: Likewise. * conform/data/sys/uio.h-data [XPG3]: Likewise. * conform/data/sys/un.h-data [XPG3]: Likewise. * conform/data/syslog.h-data [XPG3]: Likewise. * conform/data/ucontext.h-data [XPG3]: Likewise. * conform/data/utmpx.h-data [XPG3]: Likewise. * conform/data/varargs.h-data [UNIX98]: Enable file.
2014-02-27Support expected failures in .test-result files.Joseph Myers1-1/+2
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it possible for .test-result files for individual tests to contain XPASS and XFAIL rather than PASS and FAIL in cases where failure is expected. This replaces the marking of two individual tests with "-" to cause them to be expected at makefile level to fail; evaluate-test.sh will ensure it exits with status 0 for an expected failure. Tested x86_64. * scripts/evaluate-test.sh: Take new argument indicating whether failure is expected. * Makeconfig (evaluate-test): Pass argument to evaluate-test.sh indicating whether failure is expected. * conform/Makefile (test-xfail-run-conformtest): New variable. ($(objpfx)run-conformtest.out): Don't expect to fail at makefile level. * posix/Makefile (test-xfail-annexc): New variable. ($(objpfx)annexc.out): Don't expect to fail at makefile level.
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers1-0/+2
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers1-1/+2
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae1-1/+1
2013-09-25conformtest: Clean up expectations for POSIX for sched.h.Joseph Myers1-3/+11
2013-09-24conformtest: Clean up expectations for POSIX for pthread.h.Joseph Myers1-7/+8
2013-09-04conformtest: Fix namespace testing.Joseph Myers1-1/+3
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers1-1/+1
2012-11-19conformtest: Clean up expectations for POSIX for more headers.Joseph Myers4-8/+57
2012-11-19conformtest: Clean up expectations for POSIX for various headers.Joseph Myers7-66/+107
2012-11-19conformtest: Fix miscellaneous expectations for XPG4.Joseph Myers6-9/+33
2012-11-10conformtest: Fix miscellaneous UNIX98 expectations.Joseph Myers5-6/+14
2012-11-07conformtest: Fix pthreads expectations for XPG3 / XPG4 / UNIX98.Joseph Myers2-8/+18
2012-11-07conformtest: Fix setenv / unsetenv expectations.Joseph Myers1-2/+2
2012-11-07conformtest: Fix isnan function return type.Joseph Myers1-1/+1
2012-11-07conformtest: Fix sys/mman.h expectations for UNIX98.Joseph Myers1-10/+10
2012-11-07conformtest: Only expect mknodat for XOPEN2K8.Joseph Myers1-0/+2
2012-11-07conformtest: Clean up / correct / expand C99 and C11 expectations.Joseph Myers12-560/+313
2012-11-07conformtest: Fix typo in CLK_TCK condition.Joseph Myers1-1/+1
2012-11-02conformtest: Add test data for fenv.h.Joseph Myers2-1/+37
2012-11-02conformtest: Enable complex.h and inttypes.h testing for XOPEN2K8.Joseph Myers2-2/+2
2012-11-02conformtest: Fix sys/wait.h expectations for struct rusage.Joseph Myers1-1/+1
2012-07-24conformtest: Update expectations for time.h.Joseph Myers1-3/+3
2012-07-15conformtest: Update expectations for string.h.Joseph Myers1-3/+8
2012-05-24conformtest: Update expectations for stdio.h and stdlib.h.Joseph Myers2-22/+34
2012-05-09conformtest: Update expectations for more ISO C headers.Joseph Myers5-120/+78
2012-05-01conformtest: Update expectations for some ISO C headers.Joseph Myers6-146/+163
2012-05-01conformtest: Check namespace within __attribute__.Joseph Myers1-2/+3
2012-05-01conformtest: Use correct keyword set for underlying C standard.Joseph Myers1-2/+5
2012-05-01conformtest: Don't test non-C90 headers for C90.Joseph Myers2-0/+4
2012-05-01conformtest: Support testing macro usability in #if.Joseph Myers1-2/+39
2012-05-01conformtest: Support specifying types before promotion.Joseph Myers1-1/+6
2012-05-01conformtest: Unify "macro" and "constant" handling.Joseph Myers1-64/+50
2012-05-01conformtest: Unify "macro" cases.Joseph Myers2-59/+4
2012-05-01conformtest: Unify "constant" and "typed-constant".Joseph Myers2-48/+19
2012-05-01conformtest: Unify handling of "optional-" and non-optional lines.Joseph Myers1-191/+44
2012-05-01conformtest: Unify variants of "constant" and "optional-constant".Joseph Myers6-154/+96
2012-05-01conformtest: Always pass C standards options to compiler.Joseph Myers1-16/+4