aboutsummaryrefslogtreecommitdiff
path: root/NEWS
AgeCommit message (Collapse)AuthorFilesLines
2018-09-21powerpc: Only enable TLE with PPC_FEATURE2_HTM_NOSCAdhemerval Zanella1-0/+9
Linux from 3.9 through 4.2 does not abort HTM transaction on syscalls, instead it suspend and resume it when leaving the kernel. The side-effects of the syscall will always remain visible, even if the transaction is aborted. This is an issue when transaction is used along with futex syscall, on pthread_cond_wait for instance, where the futex call might succeed but the transaction is rolled back leading the pthread_cond object in an inconsistent state. Glibc used to prevent it by always aborting a transaction before issuing a syscall. Linux 4.2 also decided to abort active transaction in syscalls which makes the glibc workaround superfluous. Worse, glibc transaction abortion leads to a performance issue on recent kernels where the HTM state is saved/restore lazily (v4.9). By aborting a transaction on every syscalls, regardless whether a transaction has being initiated before, GLIBS makes the kernel always save/restore HTM state (it can not even lazily disable it after a certain number of syscall iterations). Because of this shortcoming, Transactional Lock Elision is just enabled when it has been explicitly set (either by tunables of by a configure switch) and if kernel aborts HTM transactions on syscalls (PPC_FEATURE2_HTM_NOSC). It is reported that using simple benchmark [1], the context-switch is about 5% faster by not issuing a tabort in every syscall in newer kernels. Checked on powerpc64le-linux-gnu with 4.4.0 kernel (Ubuntu 16.04). * NEWS: Add note about new TLE support on powerpc64le. * sysdeps/powerpc/nptl/tcb-offsets.sym (TM_CAPABLE): Remove. * sysdeps/powerpc/nptl/tls.h (tcbhead_t): Rename tm_capable to __ununsed1. (TLS_INIT_TP, TLS_DEFINE_INIT_TP): Remove tm_capable setup. (THREAD_GET_TM_CAPABLE, THREAD_SET_TM_CAPABLE): Remove macros. * sysdeps/powerpc/powerpc32/sysdep.h, sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION_IMPL, ABORT_TRANSACTION): Remove macros. * sysdeps/powerpc/sysdep.h (ABORT_TRANSACTION): Likewise. * sysdeps/unix/sysv/linux/powerpc/elision-conf.c (elision_init): Set __pthread_force_elision iff PPC_FEATURE2_HTM_NOSC is set. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h, sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h sysdeps/unix/sysv/linux/powerpc/syscall.S (ABORT_TRANSACTION): Remove usage. * sysdeps/unix/sysv/linux/powerpc/not-errno.h: Remove file. Reported-by: Breno Leitão <leitao@debian.org>
2018-09-19Add new pow implementationSzabolcs Nagy1-1/+1
The algorithm is exp(y * log(x)), where log(x) is computed with about 1.3*2^-68 relative error (1.5*2^-68 without fma), returning the result in two doubles, and the exp part uses the same algorithm (and lookup tables) as exp, but takes the input as two doubles and a sign (to handle negative bases with odd integer exponent). The __exp1 internal symbol is no longer necessary. There is separate code path when fma is not available but the worst case error is about 0.54 ULP in both cases. The lookup table and consts for log are 4168 bytes. The .rodata+.text is decreased by 37908 bytes on aarch64. The non-nearest rounding error is less than 1 ULP. Improvements on Cortex-A72 compared to current glibc master: pow thruput: 2.40x in [0.01 11.1]x[0.01 11.1] pow latency: 1.84x in [0.01 11.1]x[0.01 11.1] Tested on aarch64-linux-gnu (defined __FP_FAST_FMA, TOINT_INTRINSICS) and arm-linux-gnueabihf (!defined __FP_FAST_FMA, !TOINT_INTRINSICS) and x86_64-linux-gnu (!defined __FP_FAST_FMA, !TOINT_INTRINSICS) and powerpc64le-linux-gnu (defined __FP_FAST_FMA, !TOINT_INTRINSICS) targets. * NEWS: Mention pow improvements. * math/Makefile (type-double-routines): Add e_pow_log_data. * sysdeps/generic/math_private.h (__exp1): Remove. * sysdeps/i386/fpu/e_pow_log_data.c: New file. * sysdeps/ia64/fpu/e_pow_log_data.c: New file. * sysdeps/ieee754/dbl-64/Makefile (CFLAGS-e_pow.c): Allow fma contraction. * sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove. (exp_inline): Remove. (__ieee754_exp): Only single double input is handled. * sysdeps/ieee754/dbl-64/e_pow.c: Rewrite. * sysdeps/ieee754/dbl-64/e_pow_log_data.c: New file. * sysdeps/ieee754/dbl-64/math_config.h (issignaling_inline): Define. (__pow_log_data): Define. * sysdeps/ieee754/dbl-64/upow.h: Remove. * sysdeps/ieee754/dbl-64/upow.tbl: Remove. * sysdeps/m68k/m680x0/fpu/e_pow_log_data.c: New file. * sysdeps/x86_64/fpu/multiarch/Makefile (CFLAGS-e_pow-fma.c): Allow fma contraction. (CFLAGS-e_pow-fma4.c): Likewise.
2018-09-14Fix MIPS n32 pr_sigpend, pr_sighold, pr_flag type (bug 23656).Joseph Myers1-0/+6
As discussed at <https://sourceware.org/ml/libc-alpha/2018-09/msg00191.html> and followup discussions, the MIPS n32 definitions of pr_sigpend and pr_sighold in struct elf_prstatus, and pr_flag in struct elf_prpsinfo, are wrong to use unsigned long long int; actual n32 core dumps use a 32-bit type there, so userspace unsigned long int is correct for all MIPS ABIs. This patch removes the conditionals (also thereby aligning the structures with other architectures and so facilitating future unification of different versions of this header). Tested with build-many-glibcs.py for its MIPS configurations. [BZ #23656] * sysdeps/unix/sysv/linux/mips/sys/procfs.h (struct elf_prstatus): Remove [_MIPS_SIM = _ABIN32] conditional case. (struct elf_prpsinfo): Likewise.
2018-09-14Fix sys/procfs.h pr_uid, pr_gid type (bug 23649).Joseph Myers1-0/+5
As noted in <https://sourceware.org/ml/libc-alpha/2018-09/msg00178.html>, glibc's sys/procfs.h headers for microblaze, mips (n64), nios2 and riscv have incorrect types for the pr_uid and pr_gid members of struct elf_prpsinfo (as does the generic Linux version, but nothing uses that). This patch fixes those headers to use unsigned int. The generic Linux version is also fixed, but I do *not* recommend making new architectures use it yet. Rather, I think it should be reworked to look more like a copy of the AArch64 version, but with a new <bits/procfs.h> header included to provide register set definitions; <bits/procfs.h> would then be architecture-specific while many architectures could use the generic <sys/procfs.h>. This fix is deliberately separate from any reworking to use a generic header more, since it's possible there could be uses for backporting this fix but not for backporting a subsequent cleanup. Tested with build-many-glibcs.py. This of course doesn't provide much validation of the structure layout; if the Linux kernel is fixed so that "#include <linux/elfcore.h>" actually compiles with the headers from "make headers_install" (and if the layout in both headers is meant to be the same, whatever ABI we are building for), I have a test that can be added to glibc to check the layout against that from the Linux kernel. [BZ #23649] * sysdeps/unix/sysv/linux/microblaze/sys/procfs.h (struct elf_prpsinfo): Use unsigned int for pr_uid and pr_gid. * sysdeps/unix/sysv/linux/mips/sys/procfs.h (struct elf_prpsinfo): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/procfs.h (struct elf_prpsinfo): Likewise. * sysdeps/unix/sysv/linux/riscv/sys/procfs.h (struct elf_prpsinfo): Likewise. * sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prpsinfo): Likewise.
2018-09-12Add new log2 implementationSzabolcs Nagy1-1/+1
Similar algorithm is used as in log: log2(2^k x) = k + log2(c) + log2(x/c) where the last term is approximated by a polynomial of x/c - 1, the first order coefficient is about 1/ln2 in this case. There is separate code path when fma instruction is not available for computing x/c - 1 precisely, for which the table size is doubled. The worst case error is 0.547 ULP (0.55 without fma), the read only global data size is 1168 bytes (2192 without fma) on aarch64. The non-nearest rounding error is less than 1 ULP. Improvements on Cortex-A72 compared to current glibc master: log2 thruput: 2.00x in [0.01 11.1] log2 latency: 2.04x in [0.01 11.1] log2 thruput: 2.17x in [0.999 1.001] log2 latency: 2.88x in [0.999 1.001] Tested on aarch64-linux-gnu (defined __FP_FAST_FMA) arm-linux-gnueabihf (!defined __FP_FAST_FMA) x86_64-linux-gnu (!defined __FP_FAST_FMA) powerpc64le-linxu-gnu (defined __FP_FAST_FMA) targets. * NEWS: Mention log2 improvements. * math/Makefile (type-double-routines): Add e_log2_data. * sysdeps/i386/fpu/e_log2_data.c: New file. * sysdeps/ia64/fpu/e_log2_data.c: New file. * sysdeps/ieee754/dbl-64/e_log2.c: Rewrite. * sysdeps/ieee754/dbl-64/e_log2_data.c: New file. * sysdeps/ieee754/dbl-64/math_config.h (__log2_data): Add. * sysdeps/ieee754/dbl-64/wordsize-64/e_log2.c: Remove. * sysdeps/m68k/m680x0/fpu/e_log2_data.c: New file.
2018-09-12Add new log implementationSzabolcs Nagy1-1/+1
Optimized log using carefully generated lookup table with 1/c and log(c) values for small intervalls around 1. The log(c) is very near a double precision value, it has about 62 bits precision. The algorithm is log(2^k x) = k log(2) + log(c) + log(x/c), where the last term is approximated by a polynomial of x/c - 1. Near 1 a single polynomial of x - 1 is used. There is separate code path when fma instruction is not available for computing x/c - 1 precisely, in which case the table size is doubled. The code uses __builtin_fma under __FP_FAST_FMA to ensure it is inlined as an instruction. With the default configuration settings the worst case error is 0.519 ULP (and 0.520 without fma), the rodata size is 2192 bytes (4240 without fma). The non-nearest rounding error is less than 1 ULP. Improvements on Cortex-A72 compared to current glibc master: log thruput: 3.28x in [0.01 11.1] log latency: 2.23x in [0.01 11.1] log thruput: 1.56x in [0.999 1.001] log latency: 1.57x in [0.999 1.001] Tested on aarch64-linux-gnu (defined __FP_FAST_FMA) arm-linux-gnueabihf (!defined __FP_FAST_FMA) x86_64-linux-gnu (!defined __FP_FAST_FMA) powerpc64le-linux-gnu (defined __FP_FAST_FMA) targets. * NEWS: Mention log improvement. * math/Makefile (type-double-routines): Add e_log_data. * sysdeps/i386/fpu/e_log_data.c: New file. * sysdeps/ia64/fpu/e_log_data.c: New file. * sysdeps/ieee754/dbl-64/e_log.c: Rewrite. * sysdeps/ieee754/dbl-64/e_log_data.c: New file. * sysdeps/ieee754/dbl-64/math_config.h (__log_data): Add. * sysdeps/ieee754/dbl-64/ulog.h: Remove. * sysdeps/ieee754/dbl-64/ulog.tbl: Remove. * sysdeps/m68k/m680x0/fpu/e_log_data.c: New file.
2018-09-05Add new exp and exp2 implementationsSzabolcs Nagy1-1/+1
Optimized exp and exp2 implementations using a lookup table for fractional powers of 2. There are several variants, see e_exp_data.c, they can be selected by modifying math_config.h allowing different tradeoffs. The default selection should be acceptable as generic libm code. Worst case error is 0.509 ULP for exp and 0.507 ULP for exp2, on aarch64 the rodata size is 2160 bytes, shared between exp and exp2. On aarch64 .text + .rodata size decreased by 24912 bytes. The non-nearest rounding error is less than 1 ULP even on targets without efficient round implementation (although the error rate is higher in that case). Targets with single instruction, rounding mode independent, to nearest integer rounding and conversion can use them by setting TOINT_INTRINSICS and adding the necessary code to their math_private.h. The __exp1 code uses the same algorithm, so the error bound of pow increased a bit. New double precision error handling code was added following the style of the single precision error handling code. Improvements on Cortex-A72 compared to current glibc master: exp thruput: 1.61x in [-9.9 9.9] exp latency: 1.53x in [-9.9 9.9] exp thruput: 1.13x in [0.5 1] exp latency: 1.30x in [0.5 1] exp2 thruput: 2.03x in [-9.9 9.9] exp2 latency: 1.64x in [-9.9 9.9] For small (< 1) inputs the current exp code uses a separate algorithm so the speed up there is less. Was tested on aarch64-linux-gnu (TOINT_INTRINSICS, fma contraction) and arm-linux-gnueabihf (!TOINT_INTRINSICS, no fma contraction) and x86_64-linux-gnu (!TOINT_INTRINSICS, no fma contraction) and powerpc64le-linux-gnu (!TOINT_INTRINSICS, fma contraction) targets, only non-nearest rounding ulp errors increase and they are within acceptable bounds (ulp updates are in separate patches). * NEWS: Mention exp and exp2 improvements. * math/Makefile (libm-support): Remove t_exp. (type-double-routines): Add math_err and e_exp_data. * sysdeps/aarch64/libm-test-ulps: Update. * sysdeps/arm/libm-test-ulps: Update. * sysdeps/i386/fpu/e_exp_data.c: New file. * sysdeps/i386/fpu/math_err.c: New file. * sysdeps/i386/fpu/t_exp.c: Remove. * sysdeps/ia64/fpu/e_exp_data.c: New file. * sysdeps/ia64/fpu/math_err.c: New file. * sysdeps/ia64/fpu/t_exp.c: Remove. * sysdeps/ieee754/dbl-64/e_exp.c: Rewrite. * sysdeps/ieee754/dbl-64/e_exp2.c: Rewrite. * sysdeps/ieee754/dbl-64/e_exp_data.c: New file. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Update error bound. * sysdeps/ieee754/dbl-64/eexp.tbl: Remove. * sysdeps/ieee754/dbl-64/math_config.h: New file. * sysdeps/ieee754/dbl-64/math_err.c: New file. * sysdeps/ieee754/dbl-64/t_exp.c: Remove. * sysdeps/ieee754/dbl-64/t_exp2.h: Remove. * sysdeps/ieee754/dbl-64/uexp.h: Remove. * sysdeps/ieee754/dbl-64/uexp.tbl: Remove. * sysdeps/m68k/m680x0/fpu/e_exp_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_err.c: New file. * sysdeps/m68k/m680x0/fpu/t_exp.c: Remove. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
2018-08-30reallocarray: Declare under _DEFAULT_SOURCEFlorian Weimer1-0/+3
Initially, this function was restricted to _GNU_SOURCE, but experience shows that compatibility with existing build systems is improved if we declare it under _DEFAULT_SOURCE as well.
2018-08-23Update NEWS for sinf improvementsWilco Dijkstra1-2/+2
The NEWS entry for sinf improvements is listed for 2.28, while it was committed in 2.29, so move it there and mention tanf. Committed as obvious. * NEWS: Move optimized sinf entry to 2.29.
2018-08-14Improve performance of sinf and cosfWilco Dijkstra1-0/+2
The second patch improves performance of sinf and cosf using the same algorithms and polynomials. The returned values are identical to sincosf for the same input. ULP definitions for AArch64 and x64 are updated. sinf/cosf througput gains on Cortex-A72: * |x| < 0x1p-12 : 1.2x * |x| < M_PI_4 : 1.8x * |x| < 2 * M_PI: 1.7x * |x| < 120.0 : 2.3x * |x| < Inf : 3.0x * NEWS: Mention sinf, cosf, sincosf. * sysdeps/aarch64/libm-test-ulps: Update ULP for sinf, cosf, sincosf. * sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sinf and cosf. * sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Add definitions of constants rather than including generic sincosf.h. * sysdeps/x86_64/fpu/s_sincosf_data.c: Remove. * sysdeps/ieee754/flt-32/s_cosf.c (cosf): Rewrite. * sysdeps/ieee754/flt-32/s_sincosf.h (reduced_sin): Remove. (reduced_cos): Remove. (sinf_poly): New function. * sysdeps/ieee754/flt-32/s_sinf.c (sinf): Rewrite.
2018-08-02Add convenience target 'install-locale-files'.Carlos O'Donell1-1/+6
The convenience install target 'install-locale-files' is created to allow distributions to install all of the SUPPORTED locales as files instead of into the locale-archive. You invoke the new convenience target like this: make localedata/install-locale-files DESTDIR=<prefix>
2018-08-02Rename the glibc.tune namespace to glibc.cpuSiddhesh Poyarekar1-1/+2
The glibc.tune namespace is vaguely named since it is a 'tunable', so give it a more specific name that describes what it refers to. Rename the tunable namespace to 'cpu' to more accurately reflect what it encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since glibc.cpu.cpu is weird. * NEWS: Mention the change. * elf/dl-tunables.list: Rename tune namespace to cpu. * sysdeps/powerpc/dl-tunables.list: Likewise. * sysdeps/x86/dl-tunables.list: Likewise. * sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to cpu.name. * elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust. * elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise. * manual/README.tunables: Likewise. * manual/tunables.texi: Likewise. * sysdeps/powerpc/cpu-features.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/cpu-features.c (init_cpu_features): Likewise. * sysdeps/x86/cpu-features.c: Likewise. * sysdeps/x86/cpu-features.h: Likewise. * sysdeps/x86/cpu-tunables.c: Likewise. * sysdeps/x86_64/Makefile: Likewise. * sysdeps/x86/dl-cet.c: Likewise. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-08-01Open master branch for glibc 2.29 developmentglibc-2.28.9000Carlos O'Donell1-0/+24
2018-08-01Update NEWS, version.h, and features.h for glibc 2.28.glibc-2.28Carlos O'Donell1-2/+180
2018-07-27Update NEWS with ISO 14651 update information.Carlos O'Donell1-0/+12
2018-07-27NEWS: Avoid the words "nominative" and "genitive".Rafal Luzynski1-3/+4
Glibc supports two grammatical forms of month names and we keep adding the locale data which actually use this feature but those two forms are not necessarily nominative and genitive. It is better to use a more generic term. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-24Mention ISO C threads additionAdhemerval Zanella1-0/+19
* NEWS: Add ISO C threads addition.
2018-07-19INSTALL: Add a note for Intel CET statusH.J. Lu1-1/+4
* NEWS: Add a note for Intel CET status. * manual/install.texi: Likewise. * INSTALL: Regenerated.
2018-07-18oc_FR locale: Multiple updates (bug 23140, bug 23422).Quentin PAGÈS1-1/+1
Multiple updates for Occitan language including alternative month names, update abday and abmon, fix typos in day, fix d_fmt, correct LC_NAME, and use “copy "ca_ES"” as LC_COLLATE. [BZ #23140] * localedata/locales/oc_FR (mon): Rename to... (alt_mon): This, then update October (typo fix). (mon): New content (genitive case, month names preceded by "de" or "d’"). [BZ #23422] * localedata/locales/oc_FR (abday): Update all items. (day): Update Wednesday and Saturday (typo fixes). (abmon): Update all items, except May. (d_fmt): Update "%d.%m.%Y" -> "%d/%m/%Y". (LC_IDENTIFICATION): Bump the revision number and date. Keep the "category" entries in alphabetic order. (LC_ADDRESS): Remove no longer needed comment. (LC_COLLATE): Use “copy "ca_ES"”. (LC_NAME): Set the correct values of "name_fmt", "name_mr", and "name_mrs". Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-18Intel CET: Document --enable-cetH.J. Lu1-0/+10
* NEWS: Mention --enable-cet. * manual/install.texi: Document --enable-cet. * INSTALL: Regenerated.
2018-07-18New locale: Yakut (Sakha) for Russia (sah_RU) [BZ #22241]Valery Timiriliyev1-2/+2
* localedata/Makefile (test-input): Add sah_RU.UTF-8. (LOCALES): Likewise. * localedata/SUPPORTED (sah_RU/UTF-8): New entry. * localedata/locales/sah_RU: New file. * localedata/sah_RU.UTF-8.in: New file. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-17os_RU: Add alternative month names (bug 23140).Rafal Luzynski1-3/+3
[BZ #23140] * localedata/locales/os_RU (mon): Rename to... (alt_mon): This. (mon): Import from CLDR (genitive case). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-10Add the statx functionFlorian Weimer1-0/+5
2018-07-05libc-abis: Define ABSOLUTE ABI [BZ #19818][BZ #23307]Maciej W. Rozycki1-0/+7
Define a new ABSOLUTE ABI for static linker's use with EI_ABIVERSION where correct absolute (SHN_ABS) symbol run-time load semantics is required. This way it can be ensured at static link time that a program or DSO will not suffer from previous semantics where absolute symbols were relocated by the base address, or symbols whose `st_value' is zero silently ignored leading to a confusing "undefined symbol" error message at load time, and instead "ELF file ABI version invalid" is printed with old dynamic loaders, making it clear that there is an ABI version incompatibility. [BZ #19818] [BZ #23307] * libc-abis (ABSOLUTE): New ABI. * sysdeps/unix/sysv/linux/mips/libc-abis (ABSOLUTE): New ABI. * NEWS: Mention the new ABI. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-05Add renameat2 function [BZ #17662]Florian Weimer1-0/+9
The implementation falls back to renameat if renameat2 is not available in the kernel (or in the kernel headers) and the flags argument is zero. Without kernel support, a non-zero argument returns EINVAL, not ENOSYS. This mirrors what the kernel does for invalid renameat2 flags.
2018-07-04testrun.sh: Implement --tool=strace, --tool=valgrindFlorian Weimer1-1/+1
$(file …) appears to be the only convenient way to create files with newlines and make substitution variables. This needs make 4.0 (released in 2013), so update the requirement to match. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-07-04Bug 23308: Update to Unicode 11.0.0Mike FABIAN1-0/+4
Unicode 11.0.0 Support: Character encoding, character type info, and transliteration tables are all updated to Unicode 11.0.0, using the generator scripts contributed by Mike FABIAN (Red Hat). Some info about the number of characters added: Total added characters in newly generated CHARMAP: 684 Total added characters in newly generated WIDTH: 119 alpha: Added 380 characters in new ctype which were not in old ctype combining: Added 56 characters in new ctype which were not in old ctype combining_level3: Added 37 characters in new ctype which were not in old ctype graph: Added 684 characters in new ctype which were not in old ctype lower: Added 82 characters in new ctype which were not in old ctype print: Added 684 characters in new ctype which were not in old ctype punct: Added 304 characters in new ctype which were not in old ctype tolower: Added 79 characters in new ctype which were not in old ctype totitle: Added 33 characters in new ctype which were not in old ctype toupper: Added 79 characters in new ctype which were not in old ctype upper: Added 79 characters in new ctype which were not in old ctype No characters were removed. [BZ #23308] * unicode-gen/Makefile (UNICODE_VERSION): Set to 11.0.0. * localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 11.0.0. * localedata/unicode-gen/EastAsianWidth.txt: likewise. * localedata/unicode-gen/PropList.txt: likewise. * localedata/unicode-gen/UnicodeData.txt: likewise. * localedata/charmaps/UTF-8: Regenerate. * localedata/locales/i18n_ctype: likewise. * localedata/locales/tr_TR: likewise. * localedata/locales/translit_circle: likewise. * localedata/locales/translit_cjk_compat: likewise. * localedata/locales/translit_combining: likewise. * localedata/locales/translit_compat: likewise. * localedata/locales/translit_font: likewise. * localedata/locales/translit_fraction: likewise.
2018-06-29New locale: Lower Sorbian (dsb_DE) [BZ #23208]Michael Wolf1-0/+3
[BZ #23208] * localedata/SUPPORTED (dsb_DE/UTF-8): New entry. * localedata/locales/dsb_DE: New file.
2018-06-29hy_AM: Add alternative month names (bug 23140).Rafal Luzynski1-1/+1
This locale already contained correct data in mon array. Updated from CLDR to start the month names with the lowercase letters. alt_mon is a new import from CLDR. The change has been consulted off-list with a native speaker. [BZ #23140] * localedata/locales/hy_AM (mon): Synchronize with CLDR (lowercase, genitive case). (alt_mon): New entry, import from CLDR (nominative case).
2018-06-29New configure option --disable-crypt.Zack Weinberg1-0/+12
Some Linux distributions are experimenting with a new, separately maintained and hopefully more agile implementation of the crypt API. To facilitate this, add a configure option which disables glibc's embedded libcrypt. When this option is given, libcrypt.* and crypt.h will not be built nor installed.
2018-06-29Disallow use of DES encryption functions in new programs.Zack Weinberg1-0/+17
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt, ecb_crypt, and des_setparity should not be used in new programs, because they use the DES block cipher, which is unacceptably weak by modern standards. Demote all of them to compatibility symbols, and remove their prototypes from installed headers. cbc_crypt, ecb_crypt, and des_setparity were already compat symbols when glibc was configured with --disable-obsolete-rpc. POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT is defined, so this change also removes the definition of X_OPEN_CRYPT from <unistd.h>. The entire "DES Encryption" section is dropped from the manual, as is the mention of AUTH_DES and FIPS 140-2 in the introduction to crypt.texi. The documentation of 'memfrob' cross-referenced the DES Encryption section, which is replaced by a hyperlink to libgcrypt, and while I was in there I spruced up the actual documentation of 'memfrob' and 'strfry' a little. It's still fairly jokey, because those functions _are_ jokes, but they do also have real use cases, so people trying to use them for real should have all the information they need. DES-based authentication for Sun RPC is also insecure and should be deprecated or even removed, but maybe that can be left as TI-RPC's problem.
2018-06-29ast_ES: Add alternative month names (bug 23140).Rafal Luzynski1-3/+3
[BZ #23140] * localedata/locales/ast_ES (mon): Rename to... (alt_mon): This. (mon): Import from CLDR (genitive case).
2018-06-26Fix Linux fcntl OFD locks for non-LFS architectures (BZ#20251)Adhemerval Zanella1-0/+6
This patch fixes the OFD ("file private") locks for architectures that support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and F_{SET,GET}L{W}K64 expects a flock64 argument and when using old F_OFD_* flags with a non LFS flock argument the kernel might interpret the underlying data wrongly. Kernel idea originally was to avoid using such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS semantic as default it is possible to provide the functionality and avoid the bogus struct kernel passing by adjusting the struct manually for the required flags. The idea follows other LFS interfaces that provide two symbols: 1. A new LFS fcntl64 is added on default ABI with the usual macros to select it for FILE_OFFSET_BITS=64. 2. The Linux non-LFS fcntl use a stack allocated struct flock64 for F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided struct. 3. Keep a compat symbol with old broken semantic for architectures that do not define __OFF_T_MATCHES_OFF64_T. So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will aliased to fcntl and no adjustment would be required. So to actually use F_OFD_* with LFS support the source must be built with LFS support (_FILE_OFFSET_BITS=64). Also F_OFD_SETLKW command is handled a cancellation point, as for F_SETLKW{64}. Checked on x86_64-linux-gnu and i686-linux-gnu. [BZ #20251] * NEWS: Mention fcntl64 addition. * csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel. * login/utmp_file.c: Likewise. * sysdeps/posix/fdopendir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/unix/pt-fcntl.c: Likewise. * include/fcntl.h (__libc_fcntl64, __fcntl64, __fcntl64_nocancel_adjusted): New prototype. (__fcntl_nocancel_adjusted): Remove prototype. * io/Makefile (routines): Add fcntl64. (CFLAGS-fcntl64.c): New rule. * io/Versions [GLIBC_2.28] (fcntl64): New symbol. [GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64. * io/fcntl.h (fcntl64): Add prototype and redirect if __USE_FILE_OFFSET64 is defined. * io/fcntl64.c: New file. * manual/llio.text: Add a note for which commands fcntl acts a cancellation point. * nptl/Makefile (CFLAGS-fcntl64.c): New rule. * sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols. * sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): New symbols. * sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64, F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for non-LFS case. * sysdeps/unix/sysv/linux/fcntl64.c: New file. * sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename to __fcntl64_nocancel. (__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted. * sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename to __fcntl64_nocancel. * sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file. * sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks. (tests-internal): Add tst-ofdlocks-compat. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28] (fcntl64): New symbol. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
2018-06-25csb_PL: Add alternative month names (bug 23140).Rafal Luzynski1-3/+3
Kashubian language is not supported by CLDR, data copied from Wikipedia and documents released by RJK (official Kashubian Language Council), also consulted with a native speaker. Note that this language also needs ab_alt_mon feature due to the month May: nominative "môj", genitive "maja"; abbreviated nominative "môj", abbreviated genitive "maj". [BZ #23140] * localedata/locales/csb_PL (mon): Rename to... (alt_mon): This. (abmon): Rename to... (ab_alt_mon): This. (mon): Add with proper genitive forms, copy from Wikipedia. (abmon): Likewise.
2018-06-12Improve DST handling (Bug 23102, Bug 21942, Bug 18018, Bug 23259).Carlos O'Donell1-0/+11
This commit improves DST handling significantly in the following ways: firstly is_dst () is overhauled to correctly process DST sequences that would be accepted given the ELF gABI. This means that we actually now accept slightly more sequences than before. Now we accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or $ORIGIN/..., but this kind of behaviour results in unexpected and uninterpreted DST sequences being used as literal search paths leading to security defects. Therefore the first step in correcting this defect is making is_dst () properly account for all DSTs and making the function context free in the sense that it counts DSTs without knowledge of path, or AT_SECURE. Next, _dl_dst_count () is also simplified to count all DSTs regardless of context. Then in _dl_dst_substitute () we reintroduce context-dependent processing for such things as AT_SECURE handling. At the level of _dl_dst_substitute we can have access to things like the true start of the string sequence to validate $ORIGIN-based paths rooted in trusted directories. Lastly, we tighten up the accepted sequences in AT_SECURE, and avoid leaving known unexpanded DSTs, this is noted in the NEWS entry. Verified with a sequence of 68 tests on x86_64 that cover non-AT_SECURE and AT_SECURE testing using a sysroot (requires root to run). The tests cover cases for bug 23102, bug 21942, bug 18018, and bug 23259. These tests are not yet appropriate for the glibc regression testsuite, but with the upcoming test-in-container testing framework it should be possible to include these tests upstream soon. See the mailing list for the tests: https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
2018-06-12gd_GB, hsb_DE, wa_BE: Add alternative month names (bug 23140).Rafal Luzynski1-3/+4
As a followup of fixing bug 10871, these three languages now support two grammatical cases of the month names. This commit does not resolve the bug because there are more languages to be committed. [BZ #23140] * localedata/locales/gd_GB (mon): Rename to... (alt_mon): This. (mon): Import from CLDR (genitive case). * localedata/locales/hsb_DE (mon): Rename to... (alt_mon): This. (mon): Import from CLDR (genitive case). * localedata/locales/wa_BE (mon): Rename to... (alt_mon): This. (mon): Add, fill with the proper genitive forms, but CLDR data is incomplete; completed according to the comments in this file. (d_t_fmt): Do not use "di" before the month name, no longer needed. * localedata/locales/wa_BE (country_name): Reword "Beljike" -> "Beldjike".
2018-05-24Add references to CVE-2017-18269, CVE-2018-11236, CVE-2018-11237Florian Weimer1-0/+11
2018-05-23Switch IDNA implementation to libidn2 [BZ #19728] [BZ #19729] [BZ #22247]Florian Weimer1-1/+23
This provides an implementation of the IDNA2008 standard and fixes CVE-2016-6261, CVE-2016-6263, CVE-2017-14062.
2018-05-22Make llseek a compat symbol (bug 18471).Joseph Myers1-0/+5
The llseek function name is an obsolete, Linux-specific, unprototyped name for lseek64 with a link-time warning. This patch completes the obsoletion of this function name by making it into a compat symbol, not available for newly linked programs and not included in the ABI for new ports. When a compat symbol is defined in syscalls.list, the code for that function is not built at all for static linking unless some non-compat symbol for that function is also defined with an explicit symbol version, so an explicit symbol version for lseek64 is added to the MIPS n32 syscalls.list. The case in make-syscalls.sh that handles such explicit non-compat symbol versions then needs to be changed to use weak_alias instead of strong_alias when the syscall is built outside of libc, to avoid linknamespace failures from a strong lseek64 symbol in static libpthread. The x32 llseek.S was as far as I could tell already unused (nothing builds an llseek.* source file, at least since the lseek / lseek64 / llseek consolidation), so is removed in this patch as well. Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #18471] * sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Use weak aliases for non-libc case of versioned symbols. * sysdeps/unix/sysv/linux/lseek64.c: Include <shlib-compat.h>. (llseek): Define as compat symbol if [SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_28)], not as weak alias with link warning. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (llseek): Make into a compat symbol, disabled for minimum symbol version GLIBC_2.28 and later. * sysdeps/unix/sysv/linux/x86_64/x32/llseek.S: Remove file.
2018-05-18Obsolete nfsservctl.Joseph Myers1-0/+5
The Linux nfsservctl syscall was removed in Linux 3.1. Since the minimum kernel version for use with glibc is 3.2, the glibc wrapper for this syscall can no longer usefully be called. This patch makes it into a compat symbol, not provided at all for static linking or new ports. (It was already the case that there was no header declaration of this function.) Tested for x86_64. * sysdeps/unix/sysv/linux/syscalls.list (nfsservctl): Make into a compat symbol, disabled for minimum symbol version GLIBC_2.28 and later.
2018-05-17Add narrowing divide functions.Joseph Myers1-0/+3
This patch adds the narrowing divide functions from TS 18661-1 to glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64 for all configurations; f32divf64x, f32divf128, f64divf64x, f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt. The changes are mostly essentially the same as for the other narrowing functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add div. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing divide functions. * math/bits/mathcalls-narrow.h (div): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add div. * math/math-narrow.h (CHECK_NARROW_DIV): New macro. (NARROW_DIV_ROUND_TO_ODD): Likewise. (NARROW_DIV_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fdivl): New macro. (__ddivl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fdiv and ddiv. (CFLAGS-nldbl-ddiv.c): New variable. (CFLAGS-nldbl-fdiv.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_ddivl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_ddivl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fdiv, fdivl, ddivl, fMdivfN, fMdivfNx, fMxdivfN and fMxdivfNx. * math/auto-libm-test-in: Add tests of div. * math/auto-libm-test-out-narrow-div: New generated file. * math/libm-test-narrow-div.inc: New file. * sysdeps/i386/fpu/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xdivf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fdiv.c: Likewise. * sysdeps/ieee754/float128/s_f32divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64divf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xdivf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ddivl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fdivl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ddiv.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_ddivl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdiv.c: Likewise. * sysdeps/ieee754/soft-fp/s_fdivl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-16Add narrowing multiply functions.Joseph Myers1-0/+3
This patch adds the narrowing multiply functions from TS 18661-1 to glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64 for all configurations; f32mulf64x, f32mulf128, f64mulf64x, f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations with _Float64x and _Float128; __nldbl_dmull for ldbl-opt. The changes are mostly essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. f32xmulf64 for i386 cannot use precision control as used for add and subtract, because that would result in double rounding for subnormal results, so that uses round-to-odd with long double intermediate result instead. The soft-fp support involves adding a new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs and outputs. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add mul. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing multiply functions. * math/bits/mathcalls-narrow.h (mul): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add mul. * math/math-narrow.h (CHECK_NARROW_MUL): New macro. (NARROW_MUL_ROUND_TO_ODD): Likewise. (NARROW_MUL_TRIVIAL): Likewise. * soft-fp/op-common.h (FP_TRUNC_COOKED): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fmull): New macro. (__dmull): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmul and dmul. (CFLAGS-nldbl-dmul.c): New variable. (CFLAGS-nldbl-fmul.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dmull. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dmull): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fmul, fmull, dmull, fMmulfN, fMmulfNx, fMxmulfN and fMxmulfNx. * math/auto-libm-test-in: Add tests of mul. * math/auto-libm-test-out-narrow-mul: New generated file. * math/libm-test-narrow-mul.inc: New file. * sysdeps/i386/fpu/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xmulf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fmul.c: Likewise. * sysdeps/ieee754/float128/s_f32mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64mulf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xmulf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dmull.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fmull.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dmul.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_dmull.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmul.c: Likewise. * sysdeps/ieee754/soft-fp/s_fmull.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-05-02Deprecate ustat syscall interfaceAdhemerval Zanella1-0/+4
As for sysctl, ustat has been deprecated in favor of {f}statfs. Also some newer ports which uses generic interface builds a stub version that returns ENOSYS. This patch deprecates ustat interface by removing ustat.h related headers, adding a compatibility symbol, and avoiding new ports to build and provide the symbol. Checked on x86_64-linux-gnu and i686-linux-gnu. Also checked with a check-abi on all affected ABIs. * NEWS: Add ustat.h deprecation entry. * bits/ustat.h: Remove file. * misc/sys/ustat.h: Likewise. * misc/ustat.h: Likewise. * sysdeps/unix/sysv/linux/generic/ustat.c: Likewise. * misc/Makefile (headers): Remove ustat.h and sys/ustat.h. * misc/ustat.c (__ustat): Rename to __old_ustat and export only in compatibility mode. * sysdeps/unix/sysv/linux/ustat.c (__ustat): Likewise. * sysdeps/unix/sysv/linux/mips/ustat.c: Define DEV_TO_KDEV and use generic Linux implementation.
2018-04-27Remove tilegx port.Joseph Myers1-0/+2
Since tile support has been removed from the Linux kernel for 4.17, this patch removes the (unmaintained) port to tilegx from glibc (the tilepro support having been previously removed). This reflects the general principle that a glibc port needs upstream support for the architecture in all the components it build-depends on (so binutils, GCC and the Linux kernel, for the normal case of a port supporting the Linux kernel but no other OS), in order to be maintainable. Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile, there are updates to various comments referencing tile for which removal of those references seemed appropriate. The configuration is removed from README and from build-many-glibcs.py. contrib.texi keeps mention of removed contributions, but I updated Chris Metcalf's entry to reflect that he also contributed the non-removed support for the generic Linux kernel syscall interface. __ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used by tile. * sysdeps/tile: Remove. * sysdeps/unix/sysv/linux/tile: Likewise. * README (tilegx-*-linux-gnu): Remove from list of supported configurations. * manual/contrib.texi (Contributors): Mention Chris Metcalf's contribution of support for generic Linux kernel syscall interface. * scripts/build-many-glibcs.py (Context.add_all_configs): Remove tilegx configurations. (Config.install_linux_headers): Do not handle tile. * sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile in comment. * sysdeps/unix/sysv/linux/nios2/Makefile: Likewise. * sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise. [__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove conditional undefine and redefine. * sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile in comment. [__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove conditional undefine and redefine.
2018-04-23NEWS: Reindent and copyeditZack Weinberg1-29/+29
Make the indentation of the "Deprecated and removed features" section for 2.28 consistent with the indentation of the "Major new features" section above. Also, consistently refer to "stdio functions" instead of "stdio.h functions".
2018-04-02hurd: Announce that glibc now builds unpatchedSamuel Thibault1-0/+3
* NEWS: Announce that glibc now builds unpatched on GNU/Hurd. * README: Remove the mention of out-of-tree patches needed for GNU/Hurd.
2018-03-20Add narrowing subtract functions.Joseph Myers1-0/+3
This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2018-03-16NEWS: Mention the locale data changes (bug 22848, 22937, 22963).Rafal Luzynski1-0/+4
Alternative (nominative/genitive) month names have been added to the Catalan and Czech locale data and the abbreviated alternative names to Catalan and Greek.
2018-03-13[BZ 1190] Make EOF sticky in stdio.Zack Weinberg1-0/+8
C99 specifies that the EOF condition on a file is "sticky": once EOF has been encountered, all subsequent reads should continue to return EOF until the file is closed or something clears the "end-of-file indicator" (e.g. fseek, clearerr). This is arguably a change from C89, where the wording was ambiguous; the BSDs always had sticky EOF, but the System V lineage would attempt to read from the underlying fd again. GNU libc has followed System V for as long as we've been using libio, but nowadays C99 conformance and BSD compatibility are more important than System V compatibility. You might wonder if changing the _underflow impls is sufficient to apply the C99 semantics to all of the many stdio functions that perform input. It should be enough to cover all paths to _IO_SYSREAD, and the only other functions that call _IO_SYSREAD are the _seekoff impls, which is OK because seeking clears EOF, and the _xsgetn impls, which, as far as I can tell, are unused within glibc. The test programs in this patch use a pseudoterminal to set up the necessary conditions. To facilitate this I added a new test-support function that sets up a pair of pty file descriptors for you; it's almost the same as BSD openpty, the only differences are that it allocates the optionally-returned tty pathname with malloc, and that it crashes if anything goes wrong. [BZ #1190] [BZ #19476] * libio/fileops.c (_IO_new_file_underflow): Return EOF immediately if the _IO_EOF_SEEN bit is already set; update commentary. * libio/oldfileops.c (_IO_old_file_underflow): Likewise. * libio/wfileops.c (_IO_wfile_underflow): Likewise. * support/support_openpty.c, support/tty.h: New files. * support/Makefile (libsupport-routines): Add support_openpty. * libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c: New test cases. * libio/Makefile (tests): Add tst-fgetc-after-eof. * wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
2018-02-12[BZ #19239] Don't include sys/sysmacros.h from sys/types.h.Zack Weinberg1-0/+11
This completes the deprecation and removal of this inclusion, which was begun in the 2.25 release. * posix/sys/types.h: Don't include sys/sysmacros.h. * misc/sys/sysmacros.h: Remove the conditional deprecation warnings for the macros defined by this header.
generated by cgit v1.1 at 2024-12-28 01:14:31 +0000