| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I
raised the question of counting miscellaneous dependencies of tests,
built on the host rather than the build system, as tests, so that when
test failures don't stop "make check" neither do those other builds on
the host, so that a flaky host doesn't stop "make check" from
producing a complete summary of test results. Brooks supported that
idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>.
This patch implements that change for all the examples I could find:
one message catalog in catgets/, locales in localedata/ and timezone
files in timezone/.
Tested x86_64.
* catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat.
($(objpfx)sample.SJIS.cat): Use $(evaluate-test).
* timezone/Makefile (testdata): Move definition above include of
Rules.
(test-zones): New variable.
(tests-special): Add zone files.
(build-testdata): Use $(evaluate-test).
localedata/ChangeLog:
* Makefile (LOCALES): Move definition above include of Rules.
(LOCALE_SRCS): Likewise.
(CHARMAPS): Likewise.
(CTYPE_FILES): Likewise.
(tests-special): Add locale files.
($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
|
|
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes
testsuite runs generate an overall summary of test results.
A new script merge-test-results.sh deals both with collecting results
within a directory to a file with all the results from that directory,
and collecting the results from subdirectories into a single overall
file (there's not much in common between the two modes of operation of
the script, but it seemed silly to have two separate scripts for
this). Within a directory, missing results produce UNRESOLVED lines;
at top level, missing results for a whole directory produce an ERROR
line (since toplevel can't identify what the specific missing tests
are in this case).
Note that this does not change the rules for when "make" considers
there has been an error, or terminates, so unexpected failures will
still cause make to terminate, or, with -k, mean the commands for
"tests" don't get run because of failure of a dependency.
Tested x86_64, including that the summary does in fact reflect all the
tests with .test-result files.
* scripts/merge-test-results.sh: New file.
* Makefile (tests-special-notdir): New variable.
(tests): Run merge-test-results.sh.
(xtests): Likewise.
* Rules (tests-special-notdir): New variable.
(xtests-special-notdir): Likewise.
(tests): Run merge-test-results.sh
(xtests): Likewise.
|
|
This patch changes the logic by which header conformance tests are run
so that the makefiles run the tests for each (standard, header) pair
separately rather than as a single test (there are 518 such pairs
being tested at present).
Since these tests are slow and previously couldn't be run in parallel,
this obviously speeds up the whole test run significantly when using
parallel testing. There are other benefits. These tests can now be
marked as expected to fail at the level of (standard, header) pairs,
meaning that regressions introduced by a header change are much more
likely to be spotted (of course, such a regression could be a bug in
the header or in the expectations, most of which have not been
properly checked against the relevant standards).
The patch introduces lists in conform/Makefile of the headers to test
for each standard, with a new (quick) test for each standard that the
list agrees with the set of headers for which there are in fact
nonempty expectations for that standard. This means that each of the
518 pairs being tested is actually something meaningful to test rather
than a null test. I also hope to use these lists of headers in
various standards in future tests for namespace violations where a
function in a standard is implemented to call a non-reserved name for
a function outside that standard.
Although there are a lot of tests now marked as expected to fail, I
expect most of those to be easy to fix (whether with fixes to the
expectations, the headers or both - if fixing a header bug, of course
file it in Bugzilla first); only a limited number are likely to
reflect actual missing features in glibc.
Tested x86_64 (GCC 4.7 branch). It's quite possible some failures
vary from platform to platform, in which case either additional XFAILs
can be added here, or platform-specific header bugs (if applicable)
the failures show up can be fixed. I made XFAILs unconditional for
tests that should only fail for GCC 4.6 and earlier; we could make the
GCC version available in the makefiles and condition these, but simply
moving the XFAILing to a finer granularity seems a clear improvement
on the previous state of the whole of conformtest being XFAILed.
* Makeconfig (test-xfail-name): New variable.
(evaluate-test): Use $(test-xfail-name) instead of $(@F:.out=) to
compute variable name for expected failures.
* conform/Makefile (conformtest-headers-data): New variable.
(conformtest-standards): Likewise.
(conformtest-headers-ISO): Likewise.
(conformtest-headers-ISO99): Likewise.
(conformtest-headers-ISO11): Likewise.
(conformtest-headers-POSIX): Likewise.
(conformtest-headers-XPG3): Likewise.
(conformtest-headers-XPG4): Likewise.
(conformtest-headers-UNIX98): Likewise.
(conformtest-headers-XOPEN2K): Likewise.
(conformtest-headers-POSIX2008): Likewise.
(conformtest-headers-XOPEN2K8): Likewise.
(conformtest-header-list-base): Likewise.
(conformtest-header-list-tests): Likewise.
(conformtest-header-base): Likewise.
(conformtest-header-tests): Likewise.
(tests-special): Add $(conformtest-header-list-tests). If
[$(fast-check) && !$(cross-compiling)], add
$(conformtest-header-tests) instead of
$(objpfx)run-conformtest.out.
(generated): Add $(conformtest-header-list-base). If
[$(fast-check) && !$(cross-compiling)], add
$(conformtest-header-base). Remove previous setting.
($(conformtest-header-list-tests)): New target.
(test-xfail-run-conformtest): Remove variable.
($(objpfx)run-conformtest.out): Remove target.
(test-xfail-ISO11/complex.h/conform): New variable.
(test-xfail-ISO11/stdalign.h/conform): Likewise.
(test-xfail-ISO11/stdnoreturn.h/conform): Likewise.
(test-xfail-XPG3/varargs.h/conform): Likewise.
(test-xfail-XPG4/varargs.h/conform): Likewise.
(test-xfail-UNIX98/varargs.h/conform): Likewise.
(test-xfail-XPG4/ndbm.h/conform): Likewise.
(test-xfail-UNIX98/ndbm.h/conform): Likewise.
(test-xfail-XOPEN2K/ndbm.h/conform): Likewise.
(test-xfail-XOPEN2K8/ndbm.h/conform): Likewise.
(test-xfail-XPG3/fcntl.h/conform): Likewise.
(test-xfail-XPG3/ftw.h/conform): Likewise.
(test-xfail-XPG3/grp.h/conform): Likewise.
(test-xfail-XPG3/langinfo.h/conform): Likewise.
(test-xfail-XPG3/limits.h/conform): Likewise.
(test-xfail-XPG3/pwd.h/conform): Likewise.
(test-xfail-XPG3/search.h/conform): Likewise.
(test-xfail-XPG3/signal.h/conform): Likewise.
(test-xfail-XPG3/stdio.h/conform): Likewise.
(test-xfail-XPG3/stdlib.h/conform): Likewise.
(test-xfail-XPG3/string.h/conform): Likewise.
(test-xfail-XPG3/sys/ipc.h/conform): Likewise.
(test-xfail-XPG3/sys/msg.h/conform): Likewise.
(test-xfail-XPG3/sys/sem.h/conform): Likewise.
(test-xfail-XPG3/sys/shm.h/conform): Likewise.
(test-xfail-XPG3/sys/stat.h/conform): Likewise.
(test-xfail-XPG3/sys/types.h/conform): Likewise.
(test-xfail-XPG3/sys/wait.h/conform): Likewise.
(test-xfail-XPG3/termios.h/conform): Likewise.
(test-xfail-XPG3/time.h/conform): Likewise.
(test-xfail-XPG3/unistd.h/conform): Likewise.
(test-xfail-XPG4/arpa/inet.h/conform): Likewise.
(test-xfail-XPG4/fcntl.h/conform): Likewise.
(test-xfail-XPG4/langinfo.h/conform): Likewise.
(test-xfail-XPG4/netdb.h/conform): Likewise.
(test-xfail-XPG4/netinet/in.h/conform): Likewise.
(test-xfail-XPG4/signal.h/conform): Likewise.
(test-xfail-XPG4/stdio.h/conform): Likewise.
(test-xfail-XPG4/stdlib.h/conform): Likewise.
(test-xfail-XPG4/stropts.h/conform): Likewise.
(test-xfail-XPG4/sys/ipc.h/conform): Likewise.
(test-xfail-XPG4/sys/msg.h/conform): Likewise.
(test-xfail-XPG4/sys/sem.h/conform): Likewise.
(test-xfail-XPG4/sys/shm.h/conform): Likewise.
(test-xfail-XPG4/sys/socket.h/conform): Likewise.
(test-xfail-XPG4/sys/stat.h/conform): Likewise.
(test-xfail-XPG4/sys/time.h/conform): Likewise.
(test-xfail-XPG4/sys/types.h/conform): Likewise.
(test-xfail-XPG4/sys/wait.h/conform): Likewise.
(test-xfail-XPG4/termios.h/conform): Likewise.
(test-xfail-XPG4/ucontext.h/conform): Likewise.
(test-xfail-XPG4/unistd.h/conform): Likewise.
(test-xfail-XPG4/utmpx.h/conform): Likewise.
(test-xfail-POSIX/sched.h/conform): Likewise.
(test-xfail-POSIX/signal.h/conform): Likewise.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
(test-xfail-POSIX/tar.h/conform): Likewise.
(test-xfail-UNIX98/arpa/inet.h/conform): Likewise.
(test-xfail-UNIX98/fcntl.h/conform): Likewise.
(test-xfail-UNIX98/langinfo.h/conform): Likewise.
(test-xfail-UNIX98/netdb.h/conform): Likewise.
(test-xfail-UNIX98/netinet/in.h/conform): Likewise.
(test-xfail-UNIX98/sched.h/conform): Likewise.
(test-xfail-UNIX98/signal.h/conform): Likewise.
(test-xfail-UNIX98/stdio.h/conform): Likewise.
(test-xfail-UNIX98/stdlib.h/conform): Likewise.
(test-xfail-UNIX98/stropts.h/conform): Likewise.
(test-xfail-UNIX98/sys/ipc.h/conform): Likewise.
(test-xfail-UNIX98/sys/msg.h/conform): Likewise.
(test-xfail-UNIX98/sys/sem.h/conform): Likewise.
(test-xfail-UNIX98/sys/shm.h/conform): Likewise.
(test-xfail-UNIX98/sys/socket.h/conform): Likewise.
(test-xfail-UNIX98/sys/time.h/conform): Likewise.
(test-xfail-UNIX98/sys/wait.h/conform): Likewise.
(test-xfail-UNIX98/ucontext.h/conform): Likewise.
(test-xfail-UNIX98/unistd.h/conform): Likewise.
(test-xfail-UNIX98/utmpx.h/conform): Likewise.
(test-xfail-XOPEN2K/aio.h/conform): Likewise.
(test-xfail-XOPEN2K/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K/fcntl.h/conform): Likewise.
(test-xfail-XOPEN2K/langinfo.h/conform): Likewise.
(test-xfail-XOPEN2K/math.h/conform): Likewise.
(test-xfail-XOPEN2K/mqueue.h/conform): Likewise.
(test-xfail-XOPEN2K/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K/semaphore.h/conform): Likewise.
(test-xfail-XOPEN2K/signal.h/conform): Likewise.
(test-xfail-XOPEN2K/stdarg.h/conform): Likewise.
(test-xfail-XOPEN2K/stdio.h/conform): Likewise.
(test-xfail-XOPEN2K/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K/termios.h/conform): Likewise.
(test-xfail-XOPEN2K/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K/ucontext.h/conform): Likewise.
(test-xfail-XOPEN2K/utmpx.h/conform): Likewise.
(test-xfail-POSIX2008/arpa/inet.h/conform): Likewise.
(test-xfail-POSIX2008/fcntl.h/conform): Likewise.
(test-xfail-POSIX2008/netdb.h/conform): Likewise.
(test-xfail-POSIX2008/netinet/in.h/conform): Likewise.
(test-xfail-POSIX2008/signal.h/conform): Likewise.
(test-xfail-POSIX2008/stropts.h/conform): Likewise.
(test-xfail-POSIX2008/sys/socket.h/conform): Likewise.
(test-xfail-POSIX2008/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K8/fcntl.h/conform): Likewise.
(test-xfail-XOPEN2K8/limits.h/conform): Likewise.
(test-xfail-XOPEN2K8/math.h/conform): Likewise.
(test-xfail-XOPEN2K8/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K8/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K8/signal.h/conform): Likewise.
(test-xfail-XOPEN2K8/stdio.h/conform): Likewise.
(test-xfail-XOPEN2K8/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/select.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/time.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/termios.h/conform): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K8/utmpx.h/conform): Likewise.
(conformtest-cc-flags): Likewise.
($(conformtest-header-tests): New target.
* conform/check-header-lists.sh: New file.
* conform/run-conformtest.sh: Remove.
|
|
Continuing the series of patches to clean up conformtest expectations
for "POSIX" (1995/6) based on review of the expectations against the
standard, this patch cleans up those for semaphore.h, signal.h and
tar.h (including various corrections for other standards for the
expectations affected by this patch). Tested x86_64.
(Some of the failures for signal.h shown up by this patch correcting
expectations for that header are among the reasons for posix/annexc
being expected to fail. The goal is for conformtest eventually to
replace posix/annexc and stdlib/isomac once it has all relevant
functionality, and for the loop over standards and headers in
conformtest to convert to separate makefile targets for each
combination, so they can be run in parallel and so that xfails can be
more specific than the present xfailing of the whole of conformtest.)
* conform/conformtest.pl: Allow ' and \ in values given for
constants.
* conform/data/semaphore.h-data [POSIX] (fcntl.h): Allow header
inclusion.
[POSIX] (sys/types.h): Likewise.
[POSIX2008 || XOPEN2K8] (sys/types.h): Don't allow header
inclusion.
[POSIX || UNIX98 || XOPEN2K] (time.h): Don't allow header
inclusion.
* conform/data/signal.h-data (SIGIO): Remove expectation.
[XPG3] (SIGBUS): Do not expect.
[POSIX || XPG3] (SIGPOLL): Likewise.
[POSIX || XPG3] (SIGPROF): Likewise.
[POSIX || XPG3] (SIGSYS): Likewise.
[XPG3] (SIGTRAP): Likewise.
[POSIX || XPG3] (SIGURG): Likewise.
[POSIX || XPG3] (SIGVTALRM): Likewise.
[POSIX || XPG3] (SIGXCPU): Likewise.
[POSIX || XPG3] (SIGXFSZ): Likewise.
[POSIX] (SA_SIGINFO): Expect.
[XPG3] (siginfo_t): Do not expect type or contents.
[POSIX] (si_pid): Do not expect element.
[POSIX] (si_uid): Likewise.
[POSIX] (si_addr): Likewise.
[POSIX] (si_status): Likewise.
[POSIX] (si_band): Likewise.
[XPG4] (si_value): Likewise.
[POSIX || XPG3] (ILL_ILLOPC): Do not expect.
[POSIX || XPG3] (ILL_ILLOPN): Likewise.
[POSIX || XPG3] (ILL_ILLADR): Likewise.
[POSIX || XPG3] (ILL_ILLTRP): Likewise.
[POSIX || XPG3] (ILL_PRVOPC): Likewise.
[POSIX || XPG3] (ILL_PRVREG): Likewise.
[POSIX || XPG3] (ILL_COPROC): Likewise.
[POSIX || XPG3] (ILL_BADSTK): Likewise.
[POSIX || XPG3] (FPE_INTDIV): Likewise.
[POSIX || XPG3] (FPE_INTOVF): Likewise.
[POSIX || XPG3] (FPE_FLTDIV): Likewise.
[POSIX || XPG3] (FPE_FLTOVF): Likewise.
[POSIX || XPG3] (FPE_FLTUND): Likewise.
[POSIX || XPG3] (FPE_FLTRES): Likewise.
[POSIX || XPG3] (FPE_FLTINV): Likewise.
[POSIX || XPG3] (FPE_FLTSUB): Likewise.
[POSIX || XPG3] (SEGV_MAPERR): Likewise.
[POSIX || XPG3] (SEGV_ACCERR): Likewise.
[POSIX || XPG3] (BUS_ADRALN): Likewise.
[POSIX || XPG3] (BUS_ADRERR): Likewise.
[POSIX || XPG3] (BUS_OBJERR): Likewise.
[POSIX || XPG3] (CLD_EXITED): Likewise.
[POSIX || XPG3] (CLD_KILLED): Likewise.
[POSIX || XPG3] (CLD_DUMPED): Likewise.
[POSIX || XPG3] (CLD_TRAPPED): Likewise.
[POSIX || XPG3] (CLD_STOPPED): Likewise.
[POSIX || XPG3] (CLD_CONTINUED): Likewise.
[POSIX || XPG3] (POLL_IN): Likewise.
[POSIX || XPG3] (POLL_OUT): Likewise.
[POSIX || XPG3] (POLL_MSG): Likewise.
[POSIX || XPG3] (POLL_ERR): Likewise.
[POSIX || XPG3] (POLL_PRI): Likewise.
[POSIX || XPG3] (POLL_HUP): Likewise.
[POSIX || XPG3 || POSIX2008] (TRAP_BRKPT): Likewise.
[POSIX || XPG3 || POSIX2008] (TRAP_TRACE): Likewise.
(SIG*): Do not allow.
[XPG3] (si_*): Likewise.
[XPG3] (SI_*): Likewise.
[XPG3 || XPG4] (sigev_*): Likewise.
[XPG3 || XPG4] (SIGEV_*): Likewise.
[XPG3 || XPG4] (sival_*): Likewise.
[POSIX || XPG3 || XPG4] (uc_*): Likewise.
[POSIX || XPG3] (BUS_*): Likewise.
[POSIX || XPG3] (CLD_*): Likewise.
[POSIX || XPG3] (FPE_*): Likewise.
[POSIX || XPG3] (ILL_*): Likewise.
[POSIX || XPG3] (POLL_*): Likewise.
[POSIX || XPG3] (SEGV_*): Likewise.
[POSIX || XPG3 || POSIX2008] (SS_*): Likewise.
[POSIX || XPG3 || POSIX2008] (SV_*): Likewise.
[POSIX || XPG3 || POSIX2008] (TRAP_*): Likewise.
[POSIX || XPG3 || POSIX2008] (ss_*): Likewise.
[POSIX || XPG3 || POSIX2008] (sv_*): Likewise.
* conform/data/tar.h-data (TMAGLEN): Use macro-int-constant.
Specify type and value.
(TVERSLEN): Likewise.
(REGTYPE): Likewise.
(AREGTYPE): Likewise.
(LNKTYPE): Likewise.
(SYMTYPE): Likewise.
(CHRTYPE): Likewise.
(BLKTYPE): Likewise.
(DIRTYPE): Likewise.
(FIFOTYPE): Likewise.
(CONTTYPE): Likewise.
(TSUID): Likewise.
(TSGID): Likewise.
(TSVTX): Likewise.
(TUREAD): Likewise.
(TUWRITE): Likewise.
(TUEXEC): Likewise.
(TGREAD): Likewise.
(TGWRITE): Likewise.
(TGEXEC): Likewise.
(TOREAD): Likewise.
(TOWRITE): Likewise.
(TOEXEC): Likewise.
[POSIX] (TSVTX): Expect constant.
|
|
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
|
|
Continuing the corrections to which headers conformtest tests for
which standards, this patch corrects conformtest mistakes regarding
which headers to test for the remaining standards (XOPEN2K POSIX2008
XOPEN2K8). Tested x86_64.
2014-03-05 Joseph Myers <joseph@codesourcery.com>
* conform/data/netinet/tcp.h-data [POSIX2008 || XOPEN2K8]: Enable
whole file.
* conform/data/sys/timeb.h-data [POSIX2008 || XOPEN2K8]: Disable
whole file.
* conform/data/sys/uio.h-data [POSIX2008]: Likewise.
* conform/data/ucontext.h-data [POSIX2008 || XOPEN2K8]: Likewise.
|
|
Reviewing the sets of headers for which conformtest has expectations
for various standards showed up cases where headers had expectations
for standards not including those headers, or were missing
expectations for a standard that did include the header. This patch
fixes easy cases of this (largely disabling tests for standards for
which they are inapplicable). Tested x86_64.
* conform/data/aio.h-data [XPG3 || XPG4]: Disable whole file.
* conform/data/arpa/inet.h-data [XPG3]: Likewise.
* conform/data/dlfcn.h-data [XPG3 || XPG4]: Likewise.
* conform/data/fmtmsg.h-data [XPG3]: Likewise.
* conform/data/libgen.h-data [XPG3]: Likewise.
* conform/data/mqueue.h-data [XPG3 || XPG4]: Likewise.
* conform/data/ndbm.h-data [XPG3]: Likewise.
* conform/data/net/if.h-data [XPG3 || XPG4 || UNIX98]: Likewise.
* conform/data/netdb.h-data [XPG3]: Likewise.
* conform/data/netinet/in.h-data [XPG3]: Likewise.
* conform/data/poll.h-data [XPG3]: Likewise.
* conform/data/spawn.h-data [XPG3 || XPG4 || UNIX98]: Likewise.
* conform/data/strings.h-data [XPG3]: Likewise.
* conform/data/stropts.h-data [XPG3]: Likewise.
* conform/data/sys/mman.h-data [XPG3]: Likewise.
* conform/data/sys/resource.h-data [XPG3]: Likewise.
* conform/data/sys/select.h-data [XPG3 || XPG4 || UNIX98]:
Likewise.
* conform/data/sys/statvfs.h-data [XPG3]: Likewise.
* conform/data/sys/time.h-data [XPG3]: Likewise.
* conform/data/sys/timeb.h-data [XPG3]: Likewise.
* conform/data/sys/uio.h-data [XPG3]: Likewise.
* conform/data/sys/un.h-data [XPG3]: Likewise.
* conform/data/syslog.h-data [XPG3]: Likewise.
* conform/data/ucontext.h-data [XPG3]: Likewise.
* conform/data/utmpx.h-data [XPG3]: Likewise.
* conform/data/varargs.h-data [UNIX98]: Enable file.
|
|
* manual/Makefile (INSTALL_INFO): Remove variable setting.
|
|
At present, libm-test.inc tests are run in multiple rounding modes by
having a separate array for each rounding mode (which might or might
not have the same test inputs as the other such arrays), a separate
function calling a RUN_TEST_LOOP_* macro over that array, and a
separate call to that function in main. The number of functions
tested in multiple rounding modes has gradually increased as
rounding-mode-specific bugs have been found and fixed in different
functions.
It would be better to be able to use a single macro call, in a single
function, to run tests for a function over all rounding modes, with
this being done for all libm functions except in cases where it's
deferred until some bugs can be fixed because XFAILing all affected
tests would be painful (that's why the full set of pow tests isn't
currently run in all rounding modes). This patch helps prepare for
that by making the structures storing expected results for tests store
results for all four rounding modes. After this patch, the results
for all modes are just duplicates, but tests access the appropriate
field in the structure, so helping to pave the way for when the fields
stop being duplicates and multiple rounding modes can be tested from a
single array. Tests might in future specify a single set of results,
to be used in all rounding modes; separate results for each rounding
mode, specified manually; or use of auto-libm-tests-* to generate
results for each rounding mode.
Tested x86_64.
* math/libm-test.inc (struct test_f_f_data): Move expected results
into structure for each rounding mode.
(struct test_ff_f_data): Likewise.
(struct test_ff_f_data_nexttoward): Likewise.
(struct test_fi_f_data): Likewise.
(struct test_fl_f_data): Likewise.
(struct test_if_f_data): Likewise.
(struct test_fff_f_data): Likewise.
(struct test_c_f_data): Likewise.
(struct test_f_f1_data): Likewise.
(struct test_fF_f1_data): Likewise.
(struct test_ffI_f1_data): Likewise.
(struct test_c_c_data): Likewise.
(struct test_cc_c_data): Likewise.
(struct test_f_i_data): Likewise.
(struct test_ff_i_data): Likewise.
(struct test_f_l_data): Likewise.
(struct test_f_L_data): Likewise.
(struct test_fFF_11_data): Likewise.
(RM_): New macro.
(RM_FE_DOWNWARD): Likewise.
(RM_FE_TONEAREST): Likewise.
(RM_FE_TOWARDZERO): Likewise.
(RM_FE_UPWARD): Likewise.
(RUN_TEST_LOOP_f_f): Update references to expected results.
(RUN_TEST_LOOP_2_f): Likewise.
(RUN_TEST_LOOP_fff_f): Likewise.
(RUN_TEST_LOOP_c_f): Likewise.
(RUN_TEST_LOOP_f_f1): Likewise.
(RUN_TEST_LOOP_fF_f1): Likewise.
(RUN_TEST_LOOP_fI_f1): Likewise.
(RUN_TEST_LOOP_ffI_f1): Likewise.
(RUN_TEST_LOOP_c_c): Likewise.
(RUN_TEST_LOOP_cc_c): Likewise.
(RUN_TEST_LOOP_f_i): Likewise.
(RUN_TEST_LOOP_f_i_tg): Likewise.
(RUN_TEST_LOOP_ff_i_tg): Likewise.
(RUN_TEST_LOOP_f_b): Likewise.
(RUN_TEST_LOOP_f_b_tg): Likewise.
(RUN_TEST_LOOP_f_l): Likewise.
(RUN_TEST_LOOP_f_L): Likewise.
(RUN_TEST_LOOP_fFF_11): Likewise.
* math/gen-libm-test.pl (parse_args): Output four copies of
expected results for each test.
|
|
The __ASSUME_UTIMES macro describes whether the utimes syscall is
present. For linux-generic architectures, it isn't (utimensat is
instead), so the macro should not be defined for them; this patch
removes the spurious definitions for such architectures. (Those
definitions don't actually cause any user-visible bug, because
futimes.c doesn't use __ASSUME_UTIMES if __ASSUME_UTIMENSAT is
defined, and futimesat.c and utimes.c are overridden for
linux-generic, but the definitions are still logically incorrect.)
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_UTIMES): Remove.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_UTIMES): Likewise.
|
|
This patch changes gen-auto-libm-tests so that, when generating test
results that depend on whether the architecture has before-rounding or
after-rounding tininess detection, the :before-rounding or
:after-rounding conditions go on the exception / errno flags
generated, rather than generating two separate lines in
auto-libm-test-out for e.g. flt-32:before-rounding and
flt-32:after-rounding.
The rationale for this is as follows. It would be desirable for
testing a libm function in all rounding modes to require just one
function and array in libm-test.inc, not four (or five), with the
array of test data including expected results for all rounding modes
rather than separate arrays for each rounding mode that also need to
repeat all the test inputs. For gen-libm-test.pl to generate data for
such an array from auto-libm-test-out, it would be helpful if each
(format, test input) pair has exactly four lines in
auto-libm-test-out, one for each rounding mode, rather than some
rounding modes having just one line and some having two because the
exceptions depend on tininess detection.
Tested x86_64 and x86.
* math/gen-auto-libm-tests.c: Update comment on output format.
(output_for_one_input_case): Generate before-rounding and
after-rounding information as conditions on output flags not
floating-point format.
* math/auto-libm-test-out: Regenerated.
* math/gen-libm-test.pl (cond_value): New function.
(or_cond_value): Use cond_value.
(generate_testfile): Handle conditional exceptions.
|
|
This patch makes libm-test.inc apply sanity checks to ulps values
resulting from tests, or found in libm-test-ulps files, to avoid the
need for manual checking/editing of new ulps for cases that are
excessively large or involve functions that should not have any ulps.
For IBM long double, errors must be at most 14ulp (the largest
currently checked-in value), or at most 3ulp (the documented error
bound for division) in the case of exactly-determined functions; for
other formats, the limits are 9ulp (also the largest currently
checked-in value) and 0ulp. Limits from ulps files are saturated to
those bounds, and regen-ulps will ignore any errors outside those
bounds. (Thus if, say, you have an architecture-specific problem with
fma, the tests can still be XFAILed in auto-libm-test-in, but errors
outside the permitted range can no longer be listed in
libm-test-ulps.)
Tested x86_64.
* math/libm-test.inc (max_valid_error): New variable.
(init_max_error): Take new argument specifying whether function
results are exactly determined. Set max_valid_error and bound
other variables for errors based on this argument.
(set_max_error): Do not record results above max_valid_error.
(check_float_internal): Only accept errors of up to 0.5ulps if
also at most max_valid_error.
(START): Take new argument EXACT and pass it to init_max_error.
(acos_test): Update call to START.
(acos_test_tonearest): Likewise.
(acos_test_towardzero): Likewise.
(acos_test_downward): Likewise.
(acos_test_upward): Likewise.
(acosh_test): Likewise.
(asin_test): Likewise.
(asin_test_tonearest): Likewise.
(asin_test_towardzero): Likewise.
(asin_test_downward): Likewise.
(asin_test_upward): Likewise.
(asinh_test): Likewise.
(atan_test): Likewise.
(atanh_test): Likewise.
(atan2_test): Likewise.
(cabs_test): Likewise.
(cacos_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(catan_test): Likewise.
(catanh_test): Likewise.
(cbrt_test): Likewise.
(ccos_test): Likewise.
(ccosh_test): Likewise.
(ceil_test): Likewise.
(cexp_test): Likewise.
(cimag_test): Likewise.
(clog_test): Likewise.
(clog10_test): Likewise.
(conj_test): Likewise.
(copysign_test): Likewise.
(cos_test): Likewise.
(cos_test_tonearest): Likewise.
(cos_test_towardzero): Likewise.
(cos_test_downward): Likewise.
(cos_test_upward): Likewise.
(cosh_test): Likewise.
(cosh_test_tonearest): Likewise.
(cosh_test_towardzero): Likewise.
(cosh_test_downward): Likewise.
(cosh_test_upward): Likewise.
(cpow_test): Likewise.
(cproj_test): Likewise.
(creal_test): Likewise.
(csin_test): Likewise.
(csinh_test): Likewise.
(csqrt_test): Likewise.
(ctan_test): Likewise.
(ctan_test_tonearest): Likewise.
(ctan_test_towardzero): Likewise.
(ctan_test_downward): Likewise.
(ctan_test_upward): Likewise.
(ctanh_test): Likewise.
(ctanh_test_tonearest): Likewise.
(ctanh_test_towardzero): Likewise.
(ctanh_test_downward): Likewise.
(ctanh_test_upward): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(exp_test): Likewise.
(exp_test_tonearest): Likewise.
(exp_test_towardzero): Likewise.
(exp_test_downward): Likewise.
(exp_test_upward): Likewise.
(exp10_test): Likewise.
(exp10_test_tonearest): Likewise.
(exp10_test_towardzero): Likewise.
(exp10_test_downward): Likewise.
(exp10_test_upward): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(expm1_test): Likewise.
(expm1_test_tonearest): Likewise.
(expm1_test_towardzero): Likewise.
(expm1_test_downward): Likewise.
(expm1_test_upward): Likewise.
(fabs_test): Likewise.
(fdim_test): Likewise.
(floor_test): Likewise.
(fma_test): Likewise.
(fma_test_towardzero): Likewise.
(fma_test_downward): Likewise.
(fma_test_upward): Likewise.
(fmax_test): Likewise.
(fmin_test): Likewise.
(fmod_test): Likewise.
(fpclassify_test): Likewise.
(frexp_test): Likewise.
(hypot_test): Likewise.
(ilogb_test): Likewise.
(isfinite_test): Likewise.
(finite_test): Likewise.
(isgreater_test): Likewise.
(isgreaterequal_test): Likewise.
(isinf_test): Likewise.
(isless_test): Likewise.
(islessequal_test): Likewise.
(islessgreater_test): Likewise.
(isnan_test): Likewise.
(isnormal_test): Likewise.
(issignaling_test): Likewise.
(isunordered_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(jn_test): Likewise.
(ldexp_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(lrint_test): Likewise.
(lrint_test_tonearest): Likewise.
(lrint_test_towardzero): Likewise.
(lrint_test_downward): Likewise.
(lrint_test_upward): Likewise.
(llrint_test): Likewise.
(llrint_test_tonearest): Likewise.
(llrint_test_towardzero): Likewise.
(llrint_test_downward): Likewise.
(llrint_test_upward): Likewise.
(log_test): Likewise.
(log10_test): Likewise.
(log1p_test): Likewise.
(log2_test): Likewise.
(logb_test): Likewise.
(logb_test_downward): Likewise.
(lround_test): Likewise.
(llround_test): Likewise.
(modf_test): Likewise.
(nearbyint_test): Likewise.
(nextafter_test): Likewise.
(nexttoward_test): Likewise.
(pow_test): Likewise.
(pow_test_tonearest): Likewise.
(pow_test_towardzero): Likewise.
(pow_test_downward): Likewise.
(pow_test_upward): Likewise.
(remainder_test): Likewise.
(drem_test): Likewise.
(remainder_test_tonearest): Likewise.
(drem_test_tonearest): Likewise.
(remainder_test_towardzero): Likewise.
(drem_test_towardzero): Likewise.
(remainder_test_downward): Likewise.
(drem_test_downward): Likewise.
(remainder_test_upward): Likewise.
(drem_test_upward): Likewise.
(remquo_test): Likewise.
(rint_test): Likewise.
(rint_test_tonearest): Likewise.
(rint_test_towardzero): Likewise.
(rint_test_downward): Likewise.
(rint_test_upward): Likewise.
(round_test): Likewise.
(scalb_test): Likewise.
(scalbn_test): Likewise.
(scalbln_test): Likewise.
(signbit_test): Likewise.
(sin_test): Likewise.
(sin_test_tonearest): Likewise.
(sin_test_towardzero): Likewise.
(sin_test_downward): Likewise.
(sin_test_upward): Likewise.
(sincos_test): Likewise.
(sinh_test): Likewise.
(sinh_test_tonearest): Likewise.
(sinh_test_towardzero): Likewise.
(sinh_test_downward): Likewise.
(sinh_test_upward): Likewise.
(sqrt_test): Likewise.
(sqrt_test_tonearest): Likewise.
(sqrt_test_towardzero): Likewise.
(sqrt_test_downward): Likewise.
(sqrt_test_upward): Likewise.
(tan_test): Likewise.
(tan_test_tonearest): Likewise.
(tan_test_towardzero): Likewise.
(tan_test_downward): Likewise.
(tan_test_upward): Likewise.
(tanh_test): Likewise.
(tgamma_test): Likewise.
(trunc_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
(yn_test): Likewise.
(significand_test): Likewise.
|
|
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
|
|
When regenerating ulps incrementally with "make regen-ulps", the
resulting diffs should only increase existing ulps, never decrease
them. This allows successive uses of "make regen-ulps" on different
hardware or with different compiler configurations to accumulate ulps
that are sufficient for tests to pass in a variety of configurations.
However, sometimes changes that decrease ulps are wrongly generated;
thus, when applying
<https://sourceware.org/ml/libc-alpha/2014-02/msg00605.html> I had to
remove such changes manually. The problem is
print_complex_max_error. If the ulps for either the real or the
imaginary part of a function are out of range, this function prints
the maximum ulps seen for both parts, which then replace those
previously in libm-test-ulps. So if the ulps for one part are bigger
than recorded before, but those for the other part are smaller, the
diffs reduce existing ulps.
This patch fixes the logic so that only increased ulps get printed.
Tested x86_64 ("make math/tests", and "make regen-ulps" in a situation
with ulps manually modified so one part would go up and the other
down, to confirm the changes have the intended effect then).
* math/libm-test.inc (print_complex_max_error): Check separately
whether real and imaginary errors are within allowed range and
pass 0 to print_complex_function_ulps instead of value within
allowed range.
|
|
|
|
|
|
The cached offset is reliable to use in ftell when the stream handle
is active. We can consider a stream as being active when there is
unflushed data. However, even in this case, we can use the cached
offset only when the stream is not being written to in a+ mode,
because this case may have unflushed data and a stale offset; the
previous read could have sent it off somewhere other than the end of
the file.
There were a couple of adjustments necessary to get this to work.
Firstly, fdopen now ceases to use _IO_attach_fd because it sets the
offset cache to the current file position. This is not correct
because there could be changes to the file descriptor before the
stream handle is activated, which would not get reflected.
A similar offset caching action is done in _IO_fwide, claiming that
wide streams have 'problems' with the file offsets. There don't seem
to be any obvious problems with not having the offset cache available,
other than that it will have to be queried in a subsequent
read/write/seek. I have removed this as well.
The testsuite passes successfully with these changes on x86_64.
|
|
ftell semantics are distinct from fseek(SEEK_CUR) especially when it
is called on a file handler that is not yet active. Due to this
caveat, much care needs to be taken while modifying the handler data
and hence, this first iteration on separating out ftell focusses on
maintaining handler data integrity at all times while it figures out
the current stream offset. The result is that it makes a syscall for
every offset request.
There is scope for optimizing this by caching offsets when we know
that the handler is active. A simple way to find out is when the
buffers have data. It is not so simple to find this out when the
buffer is empty without adding some kind of flag.
|
|
|
|
Currently, the nscd parent process parses commandline options and
configuration, forks on startup and immediately exits with a success.
If the child process encounters some error after this, it goes
undetected and any services started up after it may have to repeatedly
check to make sure that the nscd service did actually start up and is
serving requests.
To make this process more reliable, I have added a pipe between the
parent and child process, through which the child process sends a
notification to the parent informing it of its status. The parent
waits for this status and once it receives it, exits with the
corresponding exit code. So if the child service sends a success
status (0), the parent exits with a success status. Similarly for
error conditions, the child sends the non-zero status code, which the
parent passes on as the exit code.
This, along with setting the nscd service type to forking in its
systemd configuration file, allows systemd to be certain that the nscd
service is ready and is accepting connections.
|
|
Objections were raised surrounding the calloc simplification
and it is better to revert the patch, continue discussions
and then submit a new patch for inclusion with all issues
fully addressed.
|
|
|
|
This patch optimizes strrchr() for ppc64. It uses aligned memory
access along with cmpb instruction and CPU prefetch to avoid
cache misses for speed improvement.
|
|
|
|
The glibc manual uses special annotations to include functions
in the summary chapter. These annotations were missing from the
functions in the threads chapter. This patch adds those special
markers and in turn adds these functions to the summary chapter.
|
|
While it may be argued that nested functions make the resulting
code easier to read, or worse to read the following two bugs
make it difficult to debug:
Bug 8300 - no local symbol information within nested or nesting
procedures
https://sourceware.org/bugzilla/show_bug.cgi?id=8300
Bug 53927 - wrong value for DW_AT_static_link
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53927
Until these are fixed I've made check_match a full function.
After they are fixed we can resume arguing about the merits
of nested functions on readability and maintenance.
|
|
|
|
|
|
I had forgotten to add a changelog entry for a patch. Added it now in
the right place.
|
|
This patch add a optimized llround/llroundf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
|
|
This patch add a optimized llrint/llrintf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
|
|
This patch add a optimized finite/finitef implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
|
|
This patch add a optimized isinf/isinff implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
|
|
This patch add a optimized isnan/isnanf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
|
|
Current ARM soft-float implementation is violating the RTABI
(http://infocenter.arm.com/help/topic/com.arm.doc.ihi0043d/IHI0043D_rtabi.pdf)
Section 4.1.1.1:
When not otherwise specified by IEEE 754, the result on an invalid
operation should be the quiet NaN bit pattern with only the most
significant bit of the significand set, and all other significand bits
zero.
This patch fixes it by setting _FP_NANFRAC_* to zero.
Ran make check test with -mfloat-abi=soft. No regression.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_NANFRAC_S, _FP_NANFRAC_D)
(_FP_NANFRAC_Q): Set to zero.
|
|
|
|
In 84ba214c, I removed some redundant sign computations and in the
process, I incorrectly got rid of a temporary variable, thus passing
the absolute value of the input to bsloww1. This caused #16623.
This fix undoes the incorrect change.
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
|
|
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
|
|
Minor formatting fix that was carried by issuing
sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
|
|
This is a patch to the MIPS math_private.h file to define HAVE_RM_CTX and
implement the ctx macros. I also defined a few other macros and inline
functions that I skipped the first time.
|
|
|
|
This patch adds a new "Inter-Process Communication"
chapter to cover the sem*, msg*, and shm* functions.
Initially we document only the sem* function signatures
and their safety notes.
|
|
|
|
To make future improvements of allocator simpler we could for now calloc
just call malloc and memset. With that we could omit a changes that
would duplicate malloc changes anyway.
|
|
Source packages that need to support both 2.19 and
2.20 will need to decide to use _BSD_SOURCE and
_SVID_SOURCE vs. _DEFAULT_SOURCE.
The difficulty in making that decision is that
__GLIBC_MINOR__ is itself defined in features.h,
but you want to set the feature test macros before
including features.h.
Therefore to ease the transition we should disable
the warning if _DEFAULT_SOURCE is also defined.
https://sourceware.org/ml/libc-alpha/2014-02/msg00666.html
https://sourceware.org/glibc/wiki/Release/2.20#Packaging_Changes
|
|
This commit fixes a bug where the dynamic loader would crash
when loading audit libraries, via LD_AUDIT, where those libraries
used TLS. The dynamic loader was not considering that the audit
libraries would use TLS and failed to bump the TLS generation
counter leaving TLS usage inconsistent after loading the audit
libraries.
https://sourceware.org/ml/libc-alpha/2014-02/msg00569.html
|
|
Shifting into the sign position is currently supported as a GCC
extension, but explicitly subjected to future changes. Computation
in the unsigned type followed by a cast to the signed type is a GCC
extension that will be available forever.
|
|
Now the ARM port implements pointer encryption for jmpbufs, gdb needs
a SystemTap probe point in longjmp to determine the target PC of
a call to longjmp. This patch implements the probe point in longjmp
and a similar probe point in setjmp.
In order to have all the appropriate registers available to pass to the
probe this reorders the layout of jmpbuf, putting the sp and lr registers
at the start rather than the end, allowing them to be read and
written sequentially.
Tested on armv7, no new failures in the glibc testsuite and confirmed
that this fixes the gdb.base/longjmp.exp failures in the gdb testsuite.
ChangeLog:
2014-02-25 Will Newton <will.newton@linaro.org>
* sysdeps/arm/__longjmp.S: Include stap-probe.h.
(__longjmp): Restore sp and lr before restoring callee
saved registers. Add longjmp and longjmp_target
SystemTap probe point.
* sysdeps/arm/bits/setjmp.h (__jmp_buf): Update comment.
* sysdeps/arm/include/bits/setjmp.h (__JMP_BUF_SP):
Define to zero to match jmpbuf layout.
* sysdeps/arm/setjmp.S: Include stap-probe.h.
(__sigsetjmp): Save sp and lr before saving callee
saved registers. Add setjmp SystemTap probe point.
|
