Age | Commit message (Collapse) | Author | Files | Lines |
|
This matches the location of the declaration in musl.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Commit 35e038c1d2ccb3a75395662f9c4f28d85a61444f started to use an
incomplete list of subdirs based on $(all-subdirs) causing
testroot.pristine to miss files from nss.
Tested if the list of files in testroot.pristine remains the same.
[BZ #24794]
* Makeconfig (all-subdirs): Improved source comments.
* Makefile (testroot.pristine/install.stamp): Pass
subdirs='$(sorted-subdirs)' to make install.
|
|
This fixes a regression introduced in commit
7e740ab2e7be7d83b75513aa406e0b10875f7f9c ("libio: Fix gconv-related
memory leak [BZ #24583]").
__gconv_release_cache is only ever called with heap-allocated
arrays which contain at least one member. The statically allocated
ASCII steps are filtered out by __wcsmbs_close_conv.
|
|
When compiled with -O3 and AVX, GCC 8 and 9 optimize some loops in
sysdeps/ieee754/dbl-64/branred.c with 256-bit vector instructions,
which leads to store forward stall:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90579
There is no easy fix in compiler. This patch limits vector width to
128 bits to work around this issue. It improves performance of sin
and cos by more than 40% on Skylake compiled with -O3 -march=skylake.
Tested with GCC 7/8/9 on x86-64.
[BZ #24603]
* sysdeps/x86_64/configure.ac: Check if -mprefer-vector-width=128
works.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/fpu/Makefile (CFLAGS-branred.c): New. Set
to -mprefer-vector-width=128 if supported.
|
|
|
|
The kernel changes for a 64-bit time_t on 32-bit architectures
resulted in <asm/socket.h> indirectly including <linux/posix_types.h>.
The latter is not namespace-clean for the POSIX version of
<sys/socket.h>.
This issue has persisted across several Linux releases, so this commit
creates our own copy of the SO_* definitions for !__USE_MISC mode.
The new test socket/tst-socket-consts ensures that the copy is
consistent with the kernel definitions (which vary across
architectures). The test is tricky to get right because CPPFLAGS
includes include/libc-symbols.h, which in turn defines _GNU_SOURCE
unconditionally.
Tested with build-many-glibcs.py. I verified that a discrepancy in
the definitions actually results in a failure of the
socket/tst-socket-consts test.
|
|
Whenever a sub-make is created, it inherits the variable subdirs from its
parent. This is also true when make check is called with a restricted
list of subdirs. In this scenario, make install is executed "partially"
and testroot.pristine ends up with an incomplete installation.
[BZ #24794]
* Makefile (testroot.pristine/install.stamp): Pass
subdirs='$(all-subdirs)' to make install.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Some DSOs are distributed in hardware capability directories, e.g.
/usr/lib64/power7/libc.so.6
Whenever the processor is able to use one of these hardware-enabled
DSOs, testroot.pristine ends up with copies of glibc-provided libraries
from the system because it can't overwrite or remove them.
This patch avoids the unintended copies by executing ld.so with the same
arguments passed to each glibc test.
* Makefile (testroot.pristine/install.stamp): Execute ld.so with
the same arguments used in all tests.
|
|
The new IFUNC resolver call ABI was introduced in
commit 2b8a3c86e7606cf1b0a997dad8af2d45ae8989c3
Commit: Szabolcs Nagy <szabolcs.nagy@arm.com>
CommitDate: 2019-07-04 11:13:32 +0100
aarch64: new ifunc resolver ABI
See the commit log and the comments in sys/ifunc.h for details.
|
|
This patch adds Cyrillic to plain ASCII transliteration table according
to GOST 7.79-2000 System B standard to the C locale.
[BZ #2872]
* locale/C-translit.h.in: Add Cyrillic transliteration.
|
|
This adds the system call names fsconfig, fsmount, fsopen, fspick,
move_mount, open_tree.
Tested with build-many-glibcs.py.
|
|
|
|
The pthread _clock functions that were recently added to nptl need to be
declared in hppa's pthread.h too. After this change, the function
declaration part of sysdeps/nptl/pthread.h and
sysdeps/unix/sysv/linux/hppa/pthread.h are identical.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Add declarations of
functions recently added to sysdeps/nptl/pthread.h:
pthread_mutex_clocklock, pthread_rwlock_clockrdlock,
pthread_rwlock_clockwrlock and pthread_cond_clockwait.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
In afe4de7d283ebd88157126c5494ce1796194c16e, I added forwarding functions
from libc to libpthread for __pthread_cond_clockwait and
pthread_cond_clockwait to mirror those for pthread_cond_timedwait. These
are unnecessary[1], since these functions aren't (yet) being called from
within libc itself. Let's remove them.
* nptl/forward.c: Remove unnecessary __pthread_cond_clockwait and
pthread_cond_clockwait forwarding functions. There are no internal
users, so it is unnecessary to expose these functions in libc.so.
* sysdeps/nptl/pthread-functions.h (pthread_functions): Remove
unnecessary ptr___pthread_cond_clockwait member.
* nptl/nptl-init.c (pthread_functions): Remove assignment of
removed member.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] https://sourceware.org/ml/libc-alpha/2017-10/msg00082.html
|
|
This commit updates month and weekday names (full and abbreviated)
from CLDR 35.1 with the following exceptions.
It was not clear why the full name of February in aa_DJ and aa_ER was
"Kudo" while the abbreviated version is "Nah" but some additional
sources [1] [2] as well as the content of aa_ER and aa_ER@saaho
suggest it should be "Naharsi Kudo". This commit consequently sets
the translation of February to "Naharsi Kudo" in aa_DJ and aa_ET.
aa_ER@saaho is not supported by CLDR but since the month names were
identical to aa_ER before this commit, the same values have been copied
from aa_ER.
Links:
[1] https://fr.wiktionary.org/wiki/naharsi_kudo
[2] http://www.mcit.gov.et/web/guest/-/localization-standard-for-afaraf
[BZ #21897]
* localedata/locales/aa_DJ (abday): Update from CLDR, all words
begin with an uppercase letter now.
(abmon): Likewise.
(mon): Update from CLDR, reword February from "Kudo" to
"Naharsi Kudo", April from "Agda Baxisso" to "Agda Baxis",
and August from "Liiqen" to "Leqeeni".
* localedata/locales/aa_ER (mon): Update from CLDR, reword
April from "Agda Baxisso" to "Agda Baxis" and August from
"Leqeeni" to "Liiqen".
* localedata/locales/aa_ER@saaho (mon): Likewise.
* localedata/locales/aa_ET (abmon): Update from CLDR, reword
abbreviated February from "Kud" to "Nah".
(mon): Update from CLDR, reword February from "Kudo" to
"Naharsi Kudo" and April from "Agda Baxisso" to "Agda Baxis".
|
|
The content of the section is identical in both languages.
[BZ #23996]
* localedata/locales/nl_BE (LC_NAME): Replace with “copy "nl_NL"”.
|
|
[BZ #23996]
* localedata/locales/nl_BE (LC_NAME): Add name_gen, name_mr,
name_mrs, name_miss, and name_ms.
* localedata/locales/nl_NL (LC_NAME): Likewise.
|
|
These values were removed by the commit 0a410e76f5.
[BZ #24200]
* localedata/locales/ga_IE (first_weekday): Add, set to 2 (Monday).
* localedata/locales/en_IE (first_weekday): Likewise.
|
|
The only implementation of futex_supports_exact_relative_timeouts always
returns true. Let's remove it and all its callers.
* nptl/pthread_cond_wait.c: (__pthread_cond_clockwait): Remove code
that is only useful if futex_supports_exact_relative_timeouts ()
returns false.
* nptl/pthread_condattr_setclock.c: (pthread_condattr_setclock):
Likewise.
* sysdeps/nptl/futex-internal.h: Remove comment about relative
timeouts potentially being imprecise since it's no longer true.
Remove declaration of futex_supports_exact_relative_timeouts.
* sysdeps/unix/sysv/linux/futex-internal.h: Remove implementation
of futex_supports_exact_relative_timeouts.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
* NEWS: Mention recently-added pthread_cond_clockwait,
pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock and
sem_clockwait functions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Add POSIX-proposed pthread_mutex_clocklock function that works like
pthread_mutex_timedlock but takes a clockid parameter to measure the
abstime parameter against.
* sysdeps/nptl/pthread.h: Add pthread_mutex_clocklock.
* nptl/DESIGN-systemtap-probes.txt: Likewise.
* nptl/pthread_mutex_timedlock.c
(__pthread_mutex_clocklock_common): Rename from
__pthread_mutex_timedlock and add clockid parameter. Pass this
parameter to lll_clocklock and lll_clocklock_elision in place of
CLOCK_REALTIME. (__pthread_mutex_clocklock): New function to add
LIBC_PROBE and validate clockid parameter before calling
__pthread_mutex_clocklock_common. (__pthread_mutex_timedlock): New
implementation to add LIBC_PROBE and calls
__pthread_mutex_clocklock_common passing CLOCK_REALTIME as the
clockid.
* nptl/Makefile: Add tst-mutex11.c.
* nptl/tst-abstime.c (th): Add tests for pthread_mutex_clocklock.
* nptl/tst-mutex11.c: New tests for passing invalid and unsupported
clockid parameters to pthread_mutex_clocklock.
* nptl/tst-mutex5.c (do_test_clock): Rename from do_test and take
clockid parameter to indicate which clock to be used. Call
pthread_mutex_timedlock or pthread_mutex_clocklock as appropriate.
(do_test): Call do_test_clock to separately test
pthread_mutex_timedlock, pthread_mutex_clocklock(CLOCK_REALTIME)
and pthread_mutex_clocklock(CLOCK_MONOTONIC).
* nptl/tst-mutex9.c: Likewise.
* nptl/Versions (GLIBC_2.30): Add pthread_mutex_clocklock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Rename lll_timedlock to lll_clocklock and add clockid
parameter to indicate the clock that the abstime parameter should
be measured against in preparation for adding
pthread_mutex_clocklock.
The name change mirrors the naming for the exposed pthread functions:
timed => absolute timeout measured against CLOCK_REALTIME (or clock
specified by attribute in the case of pthread_cond_timedwait.)
clock => absolute timeout measured against clock specified in preceding
parameter.
* sysdeps/nptl/lowlevellock.h (lll_clocklock): Rename from
lll_timedlock and add clockid parameter. (__lll_clocklock): Rename
from __lll_timedlock and add clockid parameter.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_clocklock):
Likewise.
* nptl/lll_timedlock_wait.c (__lll_clocklock_wait): Rename from
__lll_timedlock_wait and add clockid parameter. Use __clock_gettime
rather than __gettimeofday so that clockid can be used. This means
that conversion from struct timeval is no longer required.
* sysdeps/sparc/sparc32/lowlevellock.c (lll_clocklock_wait):
Likewise.
* sysdeps/sparc/sparc32/lll_timedlock_wait.c: Update comment to
refer to __lll_clocklock_wait rather than __lll_timedlock_wait.
* nptl/pthread_mutex_timedlock.c (lll_clocklock_elision): Rename
from lll_timedlock_elision, add clockid parameter and use
meaningful names for other parameters. (__pthread_mutex_timedlock):
Pass CLOCK_REALTIME where necessary to lll_clocklock and
lll_clocklock_elision.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_clocklock_elision): Rename from lll_timedlock_elision and add
clockid parameter. (__lll_clocklock_elision): Rename from
__lll_timedlock_elision and add clockid parameter.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-timed.c
(__lll_lock_elision): Call __lll_clocklock_elision rather than
__lll_timedlock_elision. (EXTRAARG): Add clockid parameter.
(LLL_LOCK): Likewise.
* sysdeps/unix/sysv/linux/s390/elision-timed.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-timed.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Add:
int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
and:
int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
which behave like pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock respectively, except they always measure
abstime against the supplied clockid. The functions currently support
CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other
clock is specified.
* sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and
pthread_wrlock_clockwrlock.
* nptl/Makefile: Build pthread_rwlock_clockrdlock.c and
pthread_rwlock_clockwrlock.c.
* nptl/pthread_rwlock_clockrdlock.c: Implement
pthread_rwlock_clockrdlock.
* nptl/pthread_rwlock_clockwrlock.c: Implement
pthread_rwlock_clockwrlock.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add
clockid parameter and verify that it indicates a supported clock on
entry so that we fail even if it doesn't end up being used. Pass
that clock on to futex_abstimed_wait when necessary.
(__pthread_rwlock_wrlock_full): Likewise.
* nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass
CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't
be used because there's no timeout.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass
CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't
be used because there is no timeout.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime
uses that clock.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime
uses that clock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock timeout tests to match the existing
pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests.
* nptl/tst-rwlock14.c (do_test): Likewise.
* nptl/tst-rwlock6.c Invent verbose_printf macro, and use for
ancillary output throughout. (tf): Accept thread_args structure so
that rwlock, a clockid and function name can be passed to the
thread. (do_test_clock): Rename from do_test. Accept clockid
parameter to specify test clock. Use the magic clockid value of
CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock should be tested, otherwise pass the
specified clockid to pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* nptl/tst-rwlock7.c: Likewise.
* nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept
thread_args structure so that the (now int) thread number, the
clockid and the function name can be passed to the thread.
(do_test_clock): Renamed from do_test. Pass the necessary
thread_args when creating the reader and writer threads. Use
xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* manual/threads.texi: Add documentation for
pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
As recommended by the comments in the implementations of
pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock, let's move
the timeout validity checks into the corresponding pthread_rwlock_rdlock_full
and pthread_rwlock_wrlock_full functions. Since these functions may be
called with abstime == NULL, an extra check for that is necessary too.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full):
Check validity of abstime parameter.
(__pthread_rwlock_rwlock_full): Likewise.
* nptl/pthread_rwlock_timedrdlock.c
* (pthread_rwlock_timedrdlock):
Remove check for validity of abstime parameter.
* nptl/pthread_rwlock_timedwrlock.c
* (pthread_rwlock_timedwrlock):
Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Add:
int pthread_cond_clockwait (pthread_cond_t *cond,
pthread_mutex_t *mutex,
clockid_t clockid,
const struct timespec *abstime)
which behaves just like pthread_cond_timedwait except it always measures
abstime against the supplied clockid. Currently supports CLOCK_REALTIME
and
CLOCK_MONOTONIC and returns EINVAL if any other clock is specified.
Includes feedback from many others. This function was originally
proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group
preferred the new name.
* nptl/Makefile: Add tst-cond26 and tst-cond27
* nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait
* sysdeps/nptl/pthread.h: Likewise
* nptl/forward.c: Add __pthread_cond_clockwait
* nptl/forward.c: Likewise
* nptl/pthreadP.h: Likewise
* sysdeps/nptl/pthread-functions.h: Likewise
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add
clockid parameter and comment describing why we don't need to
check
its value. Use that value when calling
futex_abstimed_wait_cancelable rather than reading the clock
from
the flags. (__pthread_cond_wait): Pass unused clockid parameter.
(__pthread_cond_timedwait): Read clock from flags and pass it to
__pthread_cond_wait_common. (__pthread_cond_clockwait): Add new
function with weak alias from pthread_cond_clockwait.
* sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist
* (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-cond11.c (run_test): Support testing
pthread_cond_clockwait too by using a special magic
CLOCK_USE_ATTR_CLOCK value to determine whether to call
pthread_cond_timedwait or pthread_cond_clockwait. (do_test):
Pass
CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using
all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME.
* ntpl/tst-cond26.c: New test for passing unsupported and
* invalid
clocks to pthread_cond_clockwait.
* nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using
struct timespec and pthread_cond_clockwait.
* manual/threads.texi: Document pthread_cond_clockwait. The
* comment
was provided by Carlos O'Donell.
[1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Add:
int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec
*abstime)
which behaves just like sem_timedwait, but measures abstime against the
specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC
and sets errno == EINVAL if any other clock is specified.
* nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add
clockid parameters to indicate the clock which abstime should be
measured against.
* nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c
(__new_sem_wait): Pass CLOCK_REALTIME as clockid to
__new_sem_wait_slow.
* nptl/sem_clockwait.c: New file to implement sem_clockwait based
on sem_timedwait.c.
* nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for
sem_clockwait.c to match those used for sem_timedwait.c.
* sysdeps/pthread/semaphore.h: Add sem_clockwait.
* nptl/Versions (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-sem17.c: Add new test for passing invalid clock to
sem_clockwait.
* nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait
tests to also test sem_clockwait.
* manual/threads.texi: Document sem_clockwait.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
In preparation for adding POSIX clockwait variants of timedwait functions,
add a clockid_t parameter to futex_abstimed_wait functions and pass
CLOCK_REALTIME from all callers for the time being.
Replace lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset
which takes a clockid_t parameter rather than the magic clockbit.
* sysdeps/nptl/lowlevellock-futex.h,
sysdeps/unix/sysv/linux/lowlevellock-futex.h: Replace
lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset that
takes a clockid rather than a special clockbit.
* sysdeps/nptl/lowlevellock-futex.h: Add
lll_futex_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling lll_futex_clock_wait_bitset.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h
(futex_abstimed_wait, futex_abstimed_wait_cancelable): Add
clockid_t parameter to indicate which clock the absolute time
passed should be measured against. Pass that clockid onto
lll_futex_clock_wait_bitset. Add invalid clock as reason for
returning -EINVAL.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h: Introduce
futex_abstimed_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling futex_abstimed_wait.
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Remove
code to calculate relative timeout for
__PTHREAD_COND_CLOCK_MONOTONIC_MASK and just pass CLOCK_MONOTONIC
or CLOCK_REALTIME as required to futex_abstimed_wait_cancelable.
* nptl/pthread_rwlock_common (__pthread_rwlock_rdlock_full)
(__pthread_wrlock_full), nptl/sem_waitcommon (do_futex_wait): Pass
additional CLOCK_REALTIME to futex_abstimed_wait_cancelable.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock):
Switch to lll_futex_clock_wait_bitset and pass CLOCK_REALTIME
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The fix for BZ#21270 (commit 158d5fa0e19) added a mask to avoid offset larger
than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap,
as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such
x32, defines off_t being equal to off64_t). This leads to use the same
mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum
offset it can use with mmap64.
This patch fixes by setting the high mask only for __NR_mmap2 usage. The
posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The
patch also change the test to check for an arch-specific header that defines
the maximum supported offset.
Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset
on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and
mips64-n32-linux-gnu.
[BZ #24699]
* posix/tst-mmap-offset.c: Mention BZ #24699.
(do_test_bz21270): Rename to do_test_large_offset and use
mmap64_maximum_offset to check for maximum expected offset value.
* sysdeps/generic/mmap_info.h: New file.
* sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise.
* sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff
__NR_mmap2 is used.
|
|
nss_db allows for getpwent et al to be called without a set*ent,
but it only works once. After the last get*ent a set*ent is
required to restart, because the end*ent did not properly reset
the module. Resetting it to NULL allows for a proper restart.
If the database doesn't exist, however, end*ent erroniously called
munmap which set errno.
The test case runs "makedb" inside the testroot, so needs selinux
DSOs installed.
|
|
Remove unnecessary variant_pcs field: the dynamic tag can be checked
directly.
* sysdeps/aarch64/dl-machine.h (elf_machine_runtime_setup): Remove the
DT_AARCH64_VARIANT_PCS check.
(elf_machine_lazy_rel): Use l_info[DT_AARCH64 (VARIANT_PCS)].
* sysdeps/aarch64/linkmap.h (struct link_map_machine): Remove
variant_pcs.
|
|
The function was never part of the malloc API.
|
|
The arguments passed by Makefile are missing match with the arguments
taken by locale/tst-locale-locpath.sh. Without this patch
cross-test-ssh.sh will be called twice in a single command while
doing the make check test wish ssh test wrapper.
* locale/Makefile: Fix tst-locale-locpath arguments passing.
|
|
Using __builtin_cpu_supports() requires support in GCC and Glibc.
My recent patch to fenv_libc.h added an unprotected use of
__builtin_cpu_supports(). Compilation of Glibc itself will fail
with a sufficiently new GCC and sufficiently old Glibc:
../sysdeps/powerpc/fpu/fegetexcept.c: In function ‘__fegetexcept’:
../sysdeps/powerpc/fpu/fenv_libc.h:52:20: error: builtin ‘__builtin_cpu_supports’ needs GLIBC (2.23 and newer) that exports hardware capability bits [-Werror]
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Fixes 3db85a9814784a74536a1f0e7b7ddbfef7dc84bb.
|
|
As per Austin Group interpretation, "the object" wrt a
dangling symlink is the symlink itself, despite FTW_PHYS.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
The power7 logb implementation does not show a performance gain on
ISA 2.07+ chips with faster floating-point to GRP instructions
(currently POWER8 and POWER9).
This patch moves the POWER7 implementation to generic one and enables
it for POWER7. It also add some cleanup to use inline floating-point
number instead of define them using static const.
The performance difference is for POWER9:
- Without patch:
"logb": {
"subnormal": {
"duration": 4.99202e+09,
"iterations": 8.83662e+08,
"max": 75.194,
"min": 5.501,
"mean": 5.64925
},
"normal": {
"duration": 4.97063e+09,
"iterations": 9.97094e+08,
"max": 46.489,
"min": 4.956,
"mean": 4.98512
}
}
- With patch:
"logb": {
"subnormal": {
"duration": 4.97226e+09,
"iterations": 9.92036e+08,
"max": 77.209,
"min": 4.892,
"mean": 5.01218
},
"normal": {
"duration": 4.96192e+09,
"iterations": 1.07545e+09,
"max": 12.361,
"min": 4.593,
"mean": 4.61382
}
}
The ifunc implementation is also enabled only for powerpc64.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/power7/fpu/s_logb.c: Move to ...
* sysdeps/powerpc/fpu/s_logb.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Move to ...
* sysdeps/powerpc/fpu/s_logbf.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbl.c: Move to ...
* sysdeps/powerpc/fpu/s_logbl.c: ... here. Use inline FP constants.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbl-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_log* objects.
(CFLAGS-s_logbf-power7.c, CFLAGS-s_logbl-power7.c,
CFLAGS-s_logb-power7.c): New fule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logb.c: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbf.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbl.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
- The resulting binary difference on 32 bits architecture is
minimum. On i686-linux-gnu (with architecture optimization
routine removed) there is no different using logb benchtests
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Move to ...
* sysdeps/ieee754/dbl-64/s_logb.c: ... here. Add work around for
powerpc32 integer 0 converting to -0.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
* benchtests/Makefile (bench-math): Add logb.
* benchtests/logb-inputs: New file.
* benchtests/logbf-inputs: New file.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
The modf{f} optimization is not an optimization for ISA 2.07+. This
patch move the IFUNC for powerpc64 only, move the power5+ to generic
location, and include the generic implementation for ISA 2.07+.
The performance changes are based on modf benchtests:
* POWER9 - ppc64
"modf": {
"": {
"duration": 4.97057e+09,
"iterations": 1.00688e+09,
"max": 28.76,
"min": 4.912,
"mean": 4.9366
}
}
* POWER9 - power5+
"modf": {
"": {
"duration": 4.98291e+09,
"iterations": 9.32818e+08,
"max": 15.058,
"min": 5.107,
"mean": 5.34178
}
}
* POWER8 - ppc64
"modf": {
"": {
"duration": 5.05329e+09,
"iterations": 8.38814e+08,
"max": 518.051,
"min": 5.79,
"mean": 6.02433
}
}
* POWER8 - power5+
"modf": {
"": {
"duration": 5.05573e+09,
"iterations": 8.35254e+08,
"max": 63.141,
"min": 5.873,
"mean": 6.05293
}
}
* POWER7 - ppc64
"modf": {
"": {
"duration": 4.89818e+09,
"iterations": 1.08408e+09,
"max": 57.556,
"min": 3.953,
"mean": 4.51827
}
}
* POWER7 - power5+
"modf": {
"": {
"duration": 4.83789e+09,
"iterations": 1.33409e+09,
"max": 46.608,
"min": 2.224,
"mean": 3.62636
}
}
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/power5+/fpu/s_modf.c: Move to ...
* sysdeps/powerpc/fpu/s_modf.c: ... here. Add ISA 2.07 optimization.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Move to ...
* sysdeps/powerpc/fpu/s_modff.c: ... here. Add ISA 2.07 optimization.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-power5+.c:
Adjust include.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile (sysdep_calls,
sysdep_routines): Add s_modf* objects.
(CFLAGS-s_modf-power5+.c, CFLAGS-s_modff-power5+.c,
CFLAGS-s_modf-ppc64.c, CFLAGS-s_modff-ppc64.c): New rule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-power5+.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf-power5+.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-power5+.c: Movo
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf-power5+.c: Move
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff-power5+.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff-power5+.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff-ppc64.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff.c: ... here.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
The powerpc hypot is slight optimized by:
- Commit 8df4e219e43, both isnan and isinf are always inlined and thus
the check TEST_INF_NAN does not make sense anymore. The generic
check for POWER7 should be faster on all powerpc configuration.
- The redundant check 'y > two60factor && (x / y) > two60' is removed.
Both changes leads to unrequired ifunc especialization for power7 and
thus they are removed. Finally The code is also cleanup a bit by inlining
the constants floating points.
The performance changes using the hypot benchtests are:
- POWER9 without patch:
"hypot": {
"overflow": {
"duration": 4.98585e+09,
"iterations": 4.84932e+08,
"max": 46.551,
"min": 10.229,
"mean": 10.2815
},
"higher_two500": {
"duration": 5.00192e+09,
"iterations": 4.24843e+08,
"max": 33.319,
"min": 11.606,
"mean": 11.7736
},
"subnormal": {
"duration": 5.0075e+09,
"iterations": 4.06792e+08,
"max": 22.178,
"min": 12.15,
"mean": 12.3097
},
"less_two500": {
"duration": 5.00685e+09,
"iterations": 4.08772e+08,
"max": 22.784,
"min": 12.052,
"mean": 12.2485
},
"default": {
"duration": 5.06002e+09,
"iterations": 4.09894e+08,
"max": 20.648,
"min": 11.874,
"mean": 12.3447
}
}
- POWER9 with patch:
"hypot": {
"overflow": {
"duration": 4.91848e+09,
"iterations": 7.28039e+08,
"max": 47.958,
"min": 6.436,
"mean": 6.75579
},
"higher_two500": {
"duration": 4.9359e+09,
"iterations": 6.63376e+08,
"max": 20.783,
"min": 7.321,
"mean": 7.44057
},
"subnormal": {
"duration": 4.9479e+09,
"iterations": 6.19772e+08,
"max": 18.856,
"min": 7.817,
"mean": 7.98341
},
"less_two500": {
"duration": 4.94275e+09,
"iterations": 6.3889e+08,
"max": 17.452,
"min": 7.597,
"mean": 7.73647
},
"default": {
"duration": 5.03645e+09,
"iterations": 5.70718e+08,
"max": 18.904,
"min": 8.55,
"mean": 8.82476
}
}
- POWER7 without patch
"hypot": {
"overflow": {
"duration": 4.86637e+09,
"iterations": 6.43196e+08,
"max": 53.958,
"min": 7.328,
"mean": 7.56592
},
"higher_two500": {
"duration": 4.99842e+09,
"iterations": 3.11012e+08,
"max": 78.227,
"min": 15.696,
"mean": 16.0715
},
"subnormal": {
"duration": 4.99841e+09,
"iterations": 3.08935e+08,
"max": 51.392,
"min": 15.983,
"mean": 16.1795
},
"less_two500": {
"duration": 5.00108e+09,
"iterations": 2.99464e+08,
"max": 73.247,
"min": 16.416,
"mean": 16.7001
},
"default": {
"duration": 5.04645e+09,
"iterations": 3.52608e+08,
"max": 70.073,
"min": 13.38,
"mean": 14.3118
}
}
- POWER7 with patch
"hypot": {
"overflow": {
"duration": 4.80785e+09,
"iterations": 8.00001e+08,
"max": 66.262,
"min": 5.888,
"mean": 6.00981
},
"higher_two500": {
"duration": 4.9859e+09,
"iterations": 3.39449e+08,
"max": 5148.44,
"min": 14.539,
"mean": 14.6882
},
"subnormal": {
"duration": 4.9905e+09,
"iterations": 3.28874e+08,
"max": 64.905,
"min": 14.971,
"mean": 15.1745
},
"less_two500": {
"duration": 4.99494e+09,
"iterations": 3.19755e+08,
"max": 103.696,
"min": 14.972,
"mean": 15.6211
},
"default": {
"duration": 5.03951e+09,
"iterations": 4.02502e+08,
"max": 61.008,
"min": 12.368,
"mean": 12.5205
}
}
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/e_hypot.c (two60, two500, two600, two1022,
twoM500, twoM600, two60factor, pdnum): Remove.
(TEST_INFO_NAN, GET_TW0_HIGH_WORD): Remove macro.
(__ieee754_hypot): Replace static variables with inline definition,
remove ununsed branches.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove e_hypot-* objects.
(CFLAGS-e_hypot-power7.c, CFLAGS-e_hypotf-power7.c): Remove rule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot-power7.c: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf-power7.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
Inputs are based on argument reductions from generic and powerpc
implementation.
* benchtests/Makefile (bench-math): Add hypot.
* benchtests/hypot-inputs: New file.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
|
|
* sysdeps/unix/sysv/linux/dl-vdso.h: Add LINUX_4
HASH code to support nds32 vdso mechanism.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The contents of the dynamic section are part of the ABI, thus
DL_RO_DYN_SECTION cannot be changed.
|
|
Passing a second argument to the ifunc resolver allows accessing
AT_HWCAP2 values from the resolver. AArch64 will start using AT_HWCAP2
on linux because for ilp32 to remain compatible with lp64 ABI no more
than 32bit hwcap flags can be in AT_HWCAP which is already used up.
Currently the relocation ordering logic does not guarantee that ifunc
resolvers can call libc apis or access libc objects, so only the
resolver arguments and runtime environment dependent instructions can
be used to do the dispatch (this affects ifunc resolvers outside of
the libc).
Since ifunc resolver is target specific and only supposed to be
called by the dynamic linker, the call ABI can be changed in a
backward compatible way:
Old call ABI passed hwcap as uint64_t, new abi sets the
_IFUNC_ARG_HWCAP flag in the hwcap and passes a second argument
that's a pointer to an extendible struct. A resolver has to check
the _IFUNC_ARG_HWCAP flag before accessing the second argument.
The new sys/ifunc.h installed header has the definitions for the
new ABI, everything is in the implementation reserved namespace.
An alternative approach is to try to support extern calls from ifunc
resolvers such as getauxval, but that seems non-trivial
https://sourceware.org/ml/libc-alpha/2017-01/msg00468.html
* sysdeps/aarch64/Makefile: Install sys/ifunc.h and add tests.
* sysdeps/aarch64/dl-irel.h (elf_ifunc_invoke): Update to new ABI.
* sysdeps/aarch64/sys/ifunc.h: New file.
* sysdeps/aarch64/tst-ifunc-arg-1.c: New file.
* sysdeps/aarch64/tst-ifunc-arg-2.c: New file.
|
|
With commit f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so:
Support moving versioned symbols between sonames [BZ #24741]"), the
dynamic linker will find the definition of vfork in libc and binds
a vfork reference to that symbol, even if the soname in the version
reference says that the symbol should be located in libpthread.
As a result, the forwarder (whether it's IFUNC-based or a duplicate
of the libc implementation) is no longer necessary.
On older architectures, a placeholder symbol is required, to make sure
that the GLIBC_2.1.2 symbol version does not go away, or is turned in
to a weak symbol definition by the link editor. (The symbol version
needs to preserved so that the symbol coverage check in
elf/dl-version.c does not fail for old binaries.)
mips32 is an outlier: It defined __vfork@@GLIBC_2.2, but the
baseline is GLIBC_2.0. Since there are other @@GLIBC_2.2 symbols,
the placeholder symbol is not needed there.
|
|
memusagestat may indirectly link against libpthread. The built
libpthread should be used, but that is only possible if it has been
built before the malloc programs.
|
|
This patch fixes the gcc warnings seen with gcc 9 -march>=z13 on s390x:
res_send.c: In function ‘__res_context_send’:
res_send.c:498:7: error: ‘resplen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
498 | if (n == 0 && (buf2 == NULL || *resplen2 == 0))
| ^
In this case send_vc is inlined into __res_context_send
and the maybe uninitialized resplen belongs to the one in send_vc.
In send_vc there is already a DIAG_IGNORE_NEEDS_COMMENT (5, "-Wmaybe-uninitialized")
and a comment which explains that this is a false-positive.
Note that resplen is used as return value.
This patch adds a further DIAG_IGNORE_NEEDS_COMMENT around the declaration of n
in __res_context_send and the comparison after n was set to the return value of send_vc.
ChangeLog:
* resolv/res_send.c (__res_context_send): Disable maybe-uninitialized
warning.
|
|
|
|
This is a workaround for [BZ #20839] which doesn't remove the NODELETE
object when _dl_open_check throws an exception. Move it after relocation
in dl_open_worker to avoid leaving the NODELETE object mapped without
relocation.
[BZ #24259]
* elf/dl-open.c (dl_open_worker): Call _dl_open_check after
relocation.
* sysdeps/x86/Makefile (tests): Add tst-cet-legacy-5a,
tst-cet-legacy-5b, tst-cet-legacy-6a and tst-cet-legacy-6b.
(modules-names): Add tst-cet-legacy-mod-5a, tst-cet-legacy-mod-5b,
tst-cet-legacy-mod-5c, tst-cet-legacy-mod-6a, tst-cet-legacy-mod-6b
and tst-cet-legacy-mod-6c.
(CFLAGS-tst-cet-legacy-5a.c): New.
(CFLAGS-tst-cet-legacy-5b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-5a.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-5b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-5c.c): Likewise.
(CFLAGS-tst-cet-legacy-6a.c): Likewise.
(CFLAGS-tst-cet-legacy-6b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-6a.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-6b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-6c.c): Likewise.
($(objpfx)tst-cet-legacy-5a): Likewise.
($(objpfx)tst-cet-legacy-5a.out): Likewise.
($(objpfx)tst-cet-legacy-mod-5a.so): Likewise.
($(objpfx)tst-cet-legacy-mod-5b.so): Likewise.
($(objpfx)tst-cet-legacy-5b): Likewise.
($(objpfx)tst-cet-legacy-5b.out): Likewise.
(tst-cet-legacy-5b-ENV): Likewise.
($(objpfx)tst-cet-legacy-6a): Likewise.
($(objpfx)tst-cet-legacy-6a.out): Likewise.
($(objpfx)tst-cet-legacy-mod-6a.so): Likewise.
($(objpfx)tst-cet-legacy-mod-6b.so): Likewise.
($(objpfx)tst-cet-legacy-6b): Likewise.
($(objpfx)tst-cet-legacy-6b.out): Likewise.
(tst-cet-legacy-6b-ENV): Likewise.
* sysdeps/x86/tst-cet-legacy-5.c: New file.
* sysdeps/x86/tst-cet-legacy-5a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-5b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-6.c: Likewise.
* sysdeps/x86/tst-cet-legacy-6a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-6b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5c.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6c.c: Likewise.
|
|
Using 'mffs' instruction to read the Floating Point Status Control Register
(FPSCR) can force a processor flush in some cases, with undesirable
performance impact. If the values of the bits in the FPSCR which force the
flush are not needed, an instruction that is new to POWER9 (ISA version 3.0),
'mffsl' can be used instead.
Cases included: get_rounding_mode, fegetround, fegetmode, fegetexcept.
* sysdeps/powerpc/bits/fenvinline.h (__fegetround): Use
__fegetround_ISA300() or __fegetround_ISA2() as appropriate.
(__fegetround_ISA300) New.
(__fegetround_ISA2) New.
* sysdeps/powerpc/fpu_control.h (IS_ISA300): New.
(_FPU_MFFS): Move implementation...
(_FPU_GETCW): Here.
(_FPU_MFFSL): Move implementation....
(_FPU_GET_RC_ISA300): Here. New.
(_FPU_GET_RC): Use _FPU_GET_RC_ISA300() or _FPU_GETCW() as appropriate.
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_status_ISA300): New.
(fegetenv_status): New.
* sysdeps/powerpc/fpu/fegetmode.c (fegetmode): Use fegetenv_status()
instead of fegetenv_register().
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Likewise.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
Further improve the timings of the string benchmarks. Ensure most take
between 1 and 4 seconds to improve accuracy. Overall time taken increases
by 35%. Tested on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* benchtests/bench-math-inlines.c: Increase iterations.
* benchtests/bench-memcmp.c: Likewise.
* benchtests/bench-rawmemchr.c: Likewise.
* benchtests/bench-strcmp.c: Likewise.
* benchtests/bench-strcpy_chk.c: Likewise.
* benchtests/bench-string.h (INNER_LOOP_ITERS8): Add define.
(INNER_LOOP_ITERS_MEDIUM): Increase iterations.
(INNER_LOOP_ITERS_SMALL): Likewise.
* benchtests/bench-strncat.c: Increase iterations.
* benchtests/bench-strncmp.c: Increase iterations.
* benchtests/bench-strncpy.c: Reduce iterations for wide strings.
* benchtests/bench-strrchr.c: Increase iterations.
* benchtests/bench-strstr.c: Keep iterations unchanged.
* benchtests/bench-strtod.c: Increase iterations.
|