aboutsummaryrefslogtreecommitdiff
path: root/time/mktime.c
diff options
context:
space:
mode:
Diffstat (limited to 'time/mktime.c')
-rw-r--r--time/mktime.c338
1 files changed, 212 insertions, 126 deletions
diff --git a/time/mktime.c b/time/mktime.c
index 5cd4e99..72b2012 100644
--- a/time/mktime.c
+++ b/time/mktime.c
@@ -60,6 +60,7 @@
#ifndef TIME_T_MAX
# define TIME_T_MAX TYPE_MAXIMUM (time_t)
#endif
+#define TIME_T_MIDPOINT (((TIME_T_MIN + TIME_T_MAX) >> 1) + 1)
/* Verify a requirement at compile-time (unlike assert, which is runtime). */
#define verify(name, assertion) struct name { char a[(assertion) ? 1 : -1]; }
@@ -111,42 +112,74 @@ const unsigned short int __mon_yday[2][13] =
# define __mktime_internal mktime_internal
#endif
+/* Return an integer value measuring (YEAR1-YDAY1 HOUR1:MIN1:SEC1) -
+ (YEAR0-YDAY0 HOUR0:MIN0:SEC0) in seconds, assuming that the clocks
+ were not adjusted between the time stamps.
-/* Yield the difference between (YEAR-YDAY HOUR:MIN:SEC) and (*TP),
- measured in seconds, ignoring leap seconds.
- YEAR uses the same numbering as TM->tm_year.
- All values are in range, except possibly YEAR.
- If TP is null, return a nonzero value.
- If overflow occurs, yield the low order bits of the correct answer. */
+ The YEAR values uses the same numbering as TP->tm_year. Values
+ need not be in the usual range. However, YEAR1 must not be less
+ than 2 * INT_MIN or greater than 2 * INT_MAX.
+
+ The result may overflow. It is the caller's responsibility to
+ detect overflow. */
+
+static inline time_t
+ydhms_diff (long int year1, long int yday1, int hour1, int min1, int sec1,
+ int year0, int yday0, int hour0, int min0, int sec0)
+{
+ verify (C99_integer_division, -1 / 2 == 0);
+ verify (long_int_year_and_yday_are_wide_enough,
+ INT_MAX <= LONG_MAX / 2 || TIME_T_MAX <= UINT_MAX);
+
+ /* Compute intervening leap days correctly even if year is negative.
+ Take care to avoid integer overflow here. */
+ int a4 = (year1 >> 2) + (TM_YEAR_BASE >> 2) - ! (year1 & 3);
+ int b4 = (year0 >> 2) + (TM_YEAR_BASE >> 2) - ! (year0 & 3);
+ int a100 = a4 / 25 - (a4 % 25 < 0);
+ int b100 = b4 / 25 - (b4 % 25 < 0);
+ int a400 = a100 >> 2;
+ int b400 = b100 >> 2;
+ int intervening_leap_days = (a4 - b4) - (a100 - b100) + (a400 - b400);
+
+ /* Compute the desired time in time_t precision. Overflow might
+ occur here. */
+ time_t tyear1 = year1;
+ time_t years = tyear1 - year0;
+ time_t days = 365 * years + yday1 - yday0 + intervening_leap_days;
+ time_t hours = 24 * days + hour1 - hour0;
+ time_t minutes = 60 * hours + min1 - min0;
+ time_t seconds = 60 * minutes + sec1 - sec0;
+ return seconds;
+}
+
+
+/* Return a time_t value corresponding to (YEAR-YDAY HOUR:MIN:SEC),
+ assuming that *T corresponds to *TP and that no clock adjustments
+ occurred between *TP and the desired time.
+ If TP is null, return a value not equal to *T; this avoids false matches.
+ If overflow occurs, yield the minimal or maximal value, except do not
+ yield a value equal to *T. */
static time_t
-ydhms_tm_diff (long int year, int yday, int hour, int min, int sec,
- const struct tm *tp)
+guess_time_tm (long int year, long int yday, int hour, int min, int sec,
+ const time_t *t, const struct tm *tp)
{
- if (!tp)
- return 1;
- else
+ if (tp)
{
- verify (C99_integer_division, -1 / 2 == 0);
-
- /* Compute intervening leap days correctly even if year is negative.
- Take care to avoid int overflow. time_t overflow is OK, since
- only the low order bits of the correct time_t answer are needed.
- Don't convert to time_t until after all divisions are done, since
- time_t might be unsigned. */
- int a4 = (year >> 2) + (TM_YEAR_BASE >> 2) - ! (year & 3);
- int b4 = (tp->tm_year >> 2) + (TM_YEAR_BASE >> 2) - ! (tp->tm_year & 3);
- int a100 = a4 / 25 - (a4 % 25 < 0);
- int b100 = b4 / 25 - (b4 % 25 < 0);
- int a400 = a100 >> 2;
- int b400 = b100 >> 2;
- int intervening_leap_days = (a4 - b4) - (a100 - b100) + (a400 - b400);
- time_t years = year - (time_t) tp->tm_year;
- time_t days = (365 * years + intervening_leap_days
- + (yday - tp->tm_yday));
- return (60 * (60 * (24 * days + (hour - tp->tm_hour))
- + (min - tp->tm_min))
- + (sec - tp->tm_sec));
+ time_t d = ydhms_diff (year, yday, hour, min, sec,
+ tp->tm_year, tp->tm_yday,
+ tp->tm_hour, tp->tm_min, tp->tm_sec);
+ time_t t1 = *t + d;
+ if ((t1 < *t) == (TYPE_SIGNED (time_t) ? d < 0 : TIME_T_MAX / 2 < d))
+ return t1;
}
+
+ /* Overflow occurred one way or another. Return the nearest result
+ that is actually in range, except don't report a zero difference
+ if the actual difference is nonzero, as that would cause a false
+ match. */
+ return (*t < TIME_T_MIDPOINT
+ ? TIME_T_MIN + (*t == TIME_T_MIN)
+ : TIME_T_MAX - (*t == TIME_T_MAX));
}
/* Use CONVERT to convert *T to a broken down time in *TP.
@@ -199,13 +232,14 @@ ranged_convert (struct tm *(*convert) (const time_t *, struct tm *),
the monotonic and mostly-unit-linear conversion function CONVERT.
Use *OFFSET to keep track of a guess at the offset of the result,
compared to what the result would be for UTC without leap seconds.
- If *OFFSET's guess is correct, only one CONVERT call is needed. */
+ If *OFFSET's guess is correct, only one CONVERT call is needed.
+ This function is external because it is used also by timegm.c. */
time_t
__mktime_internal (struct tm *tp,
struct tm *(*convert) (const time_t *, struct tm *),
time_t *offset)
{
- time_t t, dt, t0, t1, t2;
+ time_t t, gt, t0, t1, t2;
struct tm tm;
/* The maximum number of probes (calls to CONVERT) should be enough
@@ -241,38 +275,95 @@ __mktime_internal (struct tm *tp,
/* Calculate day of year from year, month, and day of month.
The result need not be in range. */
- int yday = ((__mon_yday[leapyear (year)]
- [mon_remainder + 12 * negative_mon_remainder])
- + mday - 1);
+ int mon_yday = ((__mon_yday[leapyear (year)]
+ [mon_remainder + 12 * negative_mon_remainder])
+ - 1);
+ long int lmday = mday;
+ long int yday = mon_yday + lmday;
+
+ time_t guessed_offset = *offset;
int sec_requested = sec;
- /* Only years after 1970 are defined.
- If year is 69, it might still be representable due to
- timezone differences. */
- if (year < 69)
- return -1;
-
-#if LEAP_SECONDS_POSSIBLE
- /* Handle out-of-range seconds specially,
- since ydhms_tm_diff assumes every minute has 60 seconds. */
- if (sec < 0)
- sec = 0;
- if (59 < sec)
- sec = 59;
-#endif
+ if (LEAP_SECONDS_POSSIBLE)
+ {
+ /* Handle out-of-range seconds specially,
+ since ydhms_tm_diff assumes every minute has 60 seconds. */
+ if (sec < 0)
+ sec = 0;
+ if (59 < sec)
+ sec = 59;
+ }
- /* Invert CONVERT by probing. First assume the same offset as last time.
- Then repeatedly use the error to improve the guess. */
+ /* Invert CONVERT by probing. First assume the same offset as last
+ time. */
- tm.tm_year = EPOCH_YEAR - TM_YEAR_BASE;
- tm.tm_yday = tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
- t0 = ydhms_tm_diff (year, yday, hour, min, sec, &tm);
+ t0 = ydhms_diff (year, yday, hour, min, sec,
+ EPOCH_YEAR - TM_YEAR_BASE, 0, 0, 0, - guessed_offset);
- for (t = t1 = t2 = t0 + *offset, dst2 = 0;
- (dt = ydhms_tm_diff (year, yday, hour, min, sec,
- ranged_convert (convert, &t, &tm)));
- t1 = t2, t2 = t, t += dt, dst2 = tm.tm_isdst != 0)
+ if (TIME_T_MAX / INT_MAX / 366 / 24 / 60 / 60 < 3)
+ {
+ /* time_t isn't large enough to rule out overflows, so check
+ for major overflows. A gross check suffices, since if t0
+ has overflowed, it is off by a multiple of TIME_T_MAX -
+ TIME_T_MIN + 1. So ignore any component of the difference
+ that is bounded by a small value. */
+
+ /* Approximate log base 2 of the number of time units per
+ biennium. A biennium is 2 years; use this unit instead of
+ years to avoid integer overflow. For example, 2 average
+ Gregorian years are 2 * 365.2425 * 24 * 60 * 60 seconds,
+ which is 63113904 seconds, and rint (log2 (63113904)) is
+ 26. */
+ int ALOG2_SECONDS_PER_BIENNIUM = 26;
+ int ALOG2_MINUTES_PER_BIENNIUM = 20;
+ int ALOG2_HOURS_PER_BIENNIUM = 14;
+ int ALOG2_DAYS_PER_BIENNIUM = 10;
+ int LOG2_YEARS_PER_BIENNIUM = 1;
+
+ int approx_requested_biennia =
+ ((year_requested >> LOG2_YEARS_PER_BIENNIUM)
+ - ((EPOCH_YEAR - TM_YEAR_BASE) >> LOG2_YEARS_PER_BIENNIUM)
+ + (mday >> ALOG2_DAYS_PER_BIENNIUM)
+ + (hour >> ALOG2_HOURS_PER_BIENNIUM)
+ + (min >> ALOG2_MINUTES_PER_BIENNIUM)
+ + (LEAP_SECONDS_POSSIBLE ? 0 : sec >> ALOG2_SECONDS_PER_BIENNIUM));
+
+ int approx_biennia = t0 >> ALOG2_SECONDS_PER_BIENNIUM;
+ int diff = approx_biennia - approx_requested_biennia;
+ int abs_diff = diff < 0 ? - diff : diff;
+
+ /* IRIX 4.0.5 cc miscaculates TIME_T_MIN / 3: it erroneously
+ gives a positive value of 715827882. Setting a variable
+ first then doing math on it seems to work.
+ (ghazi@caip.rutgers.edu) */
+ time_t time_t_max = TIME_T_MAX;
+ time_t time_t_min = TIME_T_MIN;
+ time_t overflow_threshold =
+ (time_t_max / 3 - time_t_min / 3) >> ALOG2_SECONDS_PER_BIENNIUM;
+
+ if (overflow_threshold < abs_diff)
+ {
+ /* Overflow occurred. Try repairing it; this might work if
+ the time zone offset is enough to undo the overflow. */
+ time_t repaired_t0 = -1 - t0;
+ approx_biennia = repaired_t0 >> ALOG2_SECONDS_PER_BIENNIUM;
+ diff = approx_biennia - approx_requested_biennia;
+ abs_diff = diff < 0 ? - diff : diff;
+ if (overflow_threshold < abs_diff)
+ return -1;
+ guessed_offset += repaired_t0 - t0;
+ t0 = repaired_t0;
+ }
+ }
+
+ /* Repeatedly use the error to improve the guess. */
+
+ for (t = t1 = t2 = t0, dst2 = 0;
+ (gt = guess_time_tm (year, yday, hour, min, sec, &t,
+ ranged_convert (convert, &t, &tm)),
+ t != gt);
+ t1 = t2, t2 = t, t = gt, dst2 = tm.tm_isdst != 0)
if (t == t1 && t != t2
&& (tm.tm_isdst < 0
|| (isdst < 0
@@ -280,91 +371,83 @@ __mktime_internal (struct tm *tp,
: (isdst != 0) != (tm.tm_isdst != 0))))
/* We can't possibly find a match, as we are oscillating
between two values. The requested time probably falls
- within a spring-forward gap of size DT. Follow the common
- practice in this case, which is to return a time that is DT
+ within a spring-forward gap of size GT - T. Follow the common
+ practice in this case, which is to return a time that is GT - T
away from the requested time, preferring a time whose
tm_isdst differs from the requested value. (If no tm_isdst
was requested and only one of the two values has a nonzero
tm_isdst, prefer that value.) In practice, this is more
useful than returning -1. */
- break;
+ goto offset_found;
else if (--remaining_probes == 0)
return -1;
- /* If we have a match, check whether tm.tm_isdst has the requested
+ /* We have a match. Check whether tm.tm_isdst has the requested
value, if any. */
- if (dt == 0 && isdst != tm.tm_isdst && 0 <= isdst && 0 <= tm.tm_isdst)
+ if (isdst != tm.tm_isdst && 0 <= isdst && 0 <= tm.tm_isdst)
{
/* tm.tm_isdst has the wrong value. Look for a neighboring
time with the right value, and use its UTC offset.
- Heuristic: probe the previous three calendar quarters (approximately),
- looking for the desired isdst. This isn't perfect,
- but it's good enough in practice. */
- int quarter = 7889238; /* seconds per average 1/4 Gregorian year */
- int i;
-
- /* If we're too close to the time_t limit, look in future quarters. */
- if (t < TIME_T_MIN + 3 * quarter)
- quarter = -quarter;
- for (i = 1; i <= 3; i++)
- {
- time_t ot = t - i * quarter;
- struct tm otm;
- ranged_convert (convert, &ot, &otm);
- if (otm.tm_isdst == isdst)
- {
- /* We found the desired tm_isdst.
- Extrapolate back to the desired time. */
- t = ot + ydhms_tm_diff (year, yday, hour, min, sec, &otm);
- ranged_convert (convert, &t, &tm);
- break;
- }
- }
+ Heuristic: probe the adjacent timestamps in both directions,
+ looking for the desired isdst. This should work for all real
+ time zone histories in the tz database. */
+
+ /* Distance between probes when looking for a DST boundary. In
+ tzdata2003a, the shortest period of DST is 601200 seconds
+ (e.g., America/Recife starting 2000-10-08 01:00), and the
+ shortest period of non-DST surrounded by DST is 694800
+ seconds (Africa/Tunis starting 1943-04-17 01:00). Use the
+ minimum of these two values, so we don't miss these short
+ periods when probing. */
+ int stride = 601200;
+
+ /* The longest period of DST in tzdata2003a is 536454000 seconds
+ (e.g., America/Jujuy starting 1946-10-01 01:00). The longest
+ period of non-DST is much longer, but it makes no real sense
+ to search for more than a year of non-DST, so use the DST
+ max. */
+ int duration_max = 536454000;
+
+ /* Search in both directions, so the maximum distance is half
+ the duration; add the stride to avoid off-by-1 problems. */
+ int delta_bound = duration_max / 2 + stride;
+
+ int delta, direction;
+
+ for (delta = stride; delta < delta_bound; delta += stride)
+ for (direction = -1; direction <= 1; direction += 2)
+ {
+ time_t ot = t + delta * direction;
+ if ((ot < t) == (direction < 0))
+ {
+ struct tm otm;
+ ranged_convert (convert, &ot, &otm);
+ if (otm.tm_isdst == isdst)
+ {
+ /* We found the desired tm_isdst.
+ Extrapolate back to the desired time. */
+ t = guess_time_tm (year, yday, hour, min, sec, &ot, &otm);
+ ranged_convert (convert, &t, &tm);
+ goto offset_found;
+ }
+ }
+ }
}
- *offset = t - t0;
+ offset_found:
+ *offset = guessed_offset + t - t0;
-#if LEAP_SECONDS_POSSIBLE
- if (sec_requested != tm.tm_sec)
+ if (LEAP_SECONDS_POSSIBLE && sec_requested != tm.tm_sec)
{
/* Adjust time to reflect the tm_sec requested, not the normalized value.
Also, repair any damage from a false match due to a leap second. */
- t += sec_requested - sec + (sec == 0 && tm.tm_sec == 60);
- if (! (*convert) (&t, &tm))
- return -1;
- }
-#endif
-
- if (TIME_T_MAX / INT_MAX / 366 / 24 / 60 / 60 < 3)
- {
- /* time_t isn't large enough to rule out overflows in ydhms_tm_diff,
- so check for major overflows. A gross check suffices,
- since if t has overflowed, it is off by a multiple of
- TIME_T_MAX - TIME_T_MIN + 1. So ignore any component of
- the difference that is bounded by a small value. */
-
- double dyear = (double) year_requested + mon_years - tm.tm_year;
- double dday = 366 * dyear + mday;
- double dsec = 60 * (60 * (24 * dday + hour) + min) + sec_requested;
-
- /* On Irix4.0.5 cc, dividing TIME_T_MIN by 3 does not produce
- correct results, ie., it erroneously gives a positive value
- of 715827882. Setting a variable first then doing math on it
- seems to work. (ghazi@caip.rutgers.edu) */
-
- const time_t time_t_max = TIME_T_MAX;
- const time_t time_t_min = TIME_T_MIN;
-
- if (time_t_max / 3 - time_t_min / 3 < (dsec < 0 ? - dsec : dsec))
- return -1;
- }
-
- if (year == 69)
- {
- /* If year was 69, need to check whether the time was representable
- or not. */
- if (t < 0 || t > 2 * 24 * 60 * 60)
+ int sec_adjustment = (sec == 0 && tm.tm_sec == 60) - sec;
+ t1 = t + sec_requested;
+ t2 = t1 + sec_adjustment;
+ if (((t1 < t) != (sec_requested < 0))
+ | ((t2 < t1) != (sec_adjustment < 0))
+ | ! (*convert) (&t, &tm))
return -1;
}
@@ -373,6 +456,10 @@ __mktime_internal (struct tm *tp,
}
+/* FIXME: This should use a signed type wide enough to hold any UTC
+ offset in seconds. 'int' should be good enough for GNU code. We
+ can't fix this unilaterally though, as other modules invoke
+ __mktime_internal. */
static time_t localtime_offset;
/* Convert *TP to a time_t value. */
@@ -409,7 +496,6 @@ not_equal_tm (const struct tm *a, const struct tm *b)
| (a->tm_mday ^ b->tm_mday)
| (a->tm_mon ^ b->tm_mon)
| (a->tm_year ^ b->tm_year)
- | (a->tm_mday ^ b->tm_mday)
| (a->tm_yday ^ b->tm_yday)
| (a->tm_isdst ^ b->tm_isdst));
}