aboutsummaryrefslogtreecommitdiff
path: root/po/libc.pot
diff options
context:
space:
mode:
Diffstat (limited to 'po/libc.pot')
-rw-r--r--po/libc.pot5871
1 files changed, 1 insertions, 5870 deletions
diff --git a/po/libc.pot b/po/libc.pot
index fa5a221..845ea8a 100644
--- a/po/libc.pot
+++ b/po/libc.pot
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: libc 2.3.90\n"
-"POT-Creation-Date: 2005-04-07 21:55-0700\n"
+"POT-Creation-Date: 2005-05-08 09:13-0700\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -14,5872 +14,3 @@ msgstr ""
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"
-#: sysdeps/generic/siglist.h:29 stdio-common/../sysdeps/unix/siglist.c:27
-msgid "Hangup"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:30 stdio-common/../sysdeps/unix/siglist.c:28
-msgid "Interrupt"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:31 stdio-common/../sysdeps/unix/siglist.c:29
-msgid "Quit"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:32 stdio-common/../sysdeps/unix/siglist.c:30
-msgid "Illegal instruction"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:33 stdio-common/../sysdeps/unix/siglist.c:31
-msgid "Trace/breakpoint trap"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:34
-msgid "Aborted"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:35 stdio-common/../sysdeps/unix/siglist.c:34
-msgid "Floating point exception"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:36 stdio-common/../sysdeps/unix/siglist.c:35
-msgid "Killed"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:37 stdio-common/../sysdeps/unix/siglist.c:36
-msgid "Bus error"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:38 stdio-common/../sysdeps/unix/siglist.c:37
-msgid "Segmentation fault"
-msgstr ""
-
-#. TRANS Broken pipe; there is no process reading from the other end of a pipe.
-#. TRANS Every library function that returns this error code also generates a
-#. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
-#. TRANS or blocked. Thus, your program will never actually see @code{EPIPE}
-#. TRANS unless it has handled or blocked @code{SIGPIPE}.
-#: sysdeps/generic/siglist.h:39 stdio-common/../sysdeps/gnu/errlist.c:359
-#: stdio-common/../sysdeps/unix/siglist.c:39
-msgid "Broken pipe"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:40 stdio-common/../sysdeps/unix/siglist.c:40
-msgid "Alarm clock"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:41 stdio-common/../sysdeps/unix/siglist.c:41
-msgid "Terminated"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:42 stdio-common/../sysdeps/unix/siglist.c:42
-msgid "Urgent I/O condition"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:43 stdio-common/../sysdeps/unix/siglist.c:43
-msgid "Stopped (signal)"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:44 stdio-common/../sysdeps/unix/siglist.c:44
-msgid "Stopped"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:45 stdio-common/../sysdeps/unix/siglist.c:45
-msgid "Continued"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:46 stdio-common/../sysdeps/unix/siglist.c:46
-msgid "Child exited"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:47 stdio-common/../sysdeps/unix/siglist.c:47
-msgid "Stopped (tty input)"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:48 stdio-common/../sysdeps/unix/siglist.c:48
-msgid "Stopped (tty output)"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:49 stdio-common/../sysdeps/unix/siglist.c:49
-msgid "I/O possible"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:50 stdio-common/../sysdeps/unix/siglist.c:50
-msgid "CPU time limit exceeded"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:51 stdio-common/../sysdeps/unix/siglist.c:51
-msgid "File size limit exceeded"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:52 stdio-common/../sysdeps/unix/siglist.c:52
-msgid "Virtual timer expired"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:53 stdio-common/../sysdeps/unix/siglist.c:53
-msgid "Profiling timer expired"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:54 stdio-common/../sysdeps/unix/siglist.c:54
-msgid "Window changed"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:55 stdio-common/../sysdeps/unix/siglist.c:56
-msgid "User defined signal 1"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:56 stdio-common/../sysdeps/unix/siglist.c:57
-msgid "User defined signal 2"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:60 stdio-common/../sysdeps/unix/siglist.c:33
-msgid "EMT trap"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:63 stdio-common/../sysdeps/unix/siglist.c:38
-msgid "Bad system call"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:66
-msgid "Stack fault"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:69
-msgid "Information request"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:71
-msgid "Power failure"
-msgstr ""
-
-#: sysdeps/generic/siglist.h:74 stdio-common/../sysdeps/unix/siglist.c:55
-msgid "Resource lost"
-msgstr ""
-
-#: sysdeps/mach/hurd/mips/dl-machine.c:68
-#: string/../sysdeps/mach/_strerror.c:57
-msgid "Error in unknown error system: "
-msgstr ""
-
-#: sysdeps/mach/hurd/mips/dl-machine.c:83
-#: string/../sysdeps/generic/_strerror.c:44
-#: string/../sysdeps/mach/_strerror.c:87
-msgid "Unknown error "
-msgstr ""
-
-#: sysdeps/unix/sysv/linux/lddlibc4.c:64
-#, c-format
-msgid "cannot open `%s'"
-msgstr ""
-
-#: sysdeps/unix/sysv/linux/lddlibc4.c:68
-#, c-format
-msgid "cannot read header from `%s'"
-msgstr ""
-
-#: iconv/iconv_charmap.c:159 iconv/iconv_prog.c:299 catgets/gencat.c:289
-#, c-format
-msgid "cannot open input file `%s'"
-msgstr ""
-
-#: iconv/iconv_charmap.c:177 iconv/iconv_prog.c:317
-#, c-format
-msgid "error while closing input `%s'"
-msgstr ""
-
-#: iconv/iconv_charmap.c:443
-#, c-format
-msgid "illegal input sequence at position %Zd"
-msgstr ""
-
-#: iconv/iconv_charmap.c:462 iconv/iconv_prog.c:527
-msgid "incomplete character or shift sequence at end of buffer"
-msgstr ""
-
-#: iconv/iconv_charmap.c:507 iconv/iconv_charmap.c:543 iconv/iconv_prog.c:570
-#: iconv/iconv_prog.c:606
-msgid "error while reading the input"
-msgstr ""
-
-#: iconv/iconv_charmap.c:525 iconv/iconv_prog.c:588
-msgid "unable to allocate buffer for input"
-msgstr ""
-
-#: iconv/iconv_prog.c:61
-msgid "Input/Output format specification:"
-msgstr ""
-
-#: iconv/iconv_prog.c:62
-msgid "encoding of original text"
-msgstr ""
-
-#: iconv/iconv_prog.c:63
-msgid "encoding for output"
-msgstr ""
-
-#: iconv/iconv_prog.c:64
-msgid "Information:"
-msgstr ""
-
-#: iconv/iconv_prog.c:65
-msgid "list all known coded character sets"
-msgstr ""
-
-#: iconv/iconv_prog.c:66 locale/programs/localedef.c:128
-msgid "Output control:"
-msgstr ""
-
-#: iconv/iconv_prog.c:67
-msgid "omit invalid characters from output"
-msgstr ""
-
-#: iconv/iconv_prog.c:68
-msgid "output file"
-msgstr ""
-
-#: iconv/iconv_prog.c:69
-msgid "suppress warnings"
-msgstr ""
-
-#: iconv/iconv_prog.c:70
-msgid "print progress information"
-msgstr ""
-
-#: iconv/iconv_prog.c:75
-msgid "Convert encoding of given files from one encoding to another."
-msgstr ""
-
-#: iconv/iconv_prog.c:79
-msgid "[FILE...]"
-msgstr ""
-
-#: iconv/iconv_prog.c:201
-msgid "cannot open output file"
-msgstr ""
-
-#: iconv/iconv_prog.c:243
-#, c-format
-msgid "conversion from `%s' and to `%s' are not supported"
-msgstr ""
-
-#: iconv/iconv_prog.c:248
-#, c-format
-msgid "conversion from `%s' is not supported"
-msgstr ""
-
-#: iconv/iconv_prog.c:255
-#, c-format
-msgid "conversion to `%s' is not supported"
-msgstr ""
-
-#: iconv/iconv_prog.c:259
-#, c-format
-msgid "conversion from `%s' to `%s' is not supported"
-msgstr ""
-
-#: iconv/iconv_prog.c:269
-msgid "failed to start conversion processing"
-msgstr ""
-
-#: iconv/iconv_prog.c:363
-msgid "error while closing output file"
-msgstr ""
-
-#: iconv/iconv_prog.c:412 iconv/iconvconfig.c:381
-#: locale/programs/localedef.c:372 catgets/gencat.c:233
-#: malloc/memusagestat.c:524 nss/getent.c:787 debug/pcprofiledump.c:199
-msgid ""
-"For bug reporting instructions, please see:\n"
-"<http://www.gnu.org/software/libc/bugs.html>.\n"
-msgstr ""
-
-#: iconv/iconv_prog.c:427 iconv/iconvconfig.c:396 locale/programs/locale.c:276
-#: locale/programs/localedef.c:388 catgets/gencat.c:247 posix/getconf.c:963
-#: nss/getent.c:82 nscd/nscd.c:394 nscd/nscd_nischeck.c:90 elf/ldconfig.c:287
-#: elf/sprof.c:355
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"This is free software; see the source for copying conditions. There is NO\n"
-"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
-msgstr ""
-
-#: iconv/iconv_prog.c:432 iconv/iconvconfig.c:401 locale/programs/locale.c:281
-#: locale/programs/localedef.c:393 catgets/gencat.c:252 posix/getconf.c:968
-#: nss/getent.c:87 nscd/nscd.c:399 nscd/nscd_nischeck.c:95 elf/ldconfig.c:292
-#: elf/sprof.c:361
-#, c-format
-msgid "Written by %s.\n"
-msgstr ""
-
-#: iconv/iconv_prog.c:472 iconv/iconv_prog.c:498
-msgid "conversion stopped due to problem in writing the output"
-msgstr ""
-
-#: iconv/iconv_prog.c:523
-#, c-format
-msgid "illegal input sequence at position %ld"
-msgstr ""
-
-#: iconv/iconv_prog.c:531
-msgid "internal error (illegal descriptor)"
-msgstr ""
-
-#: iconv/iconv_prog.c:534
-#, c-format
-msgid "unknown iconv() error %d"
-msgstr ""
-
-#: iconv/iconv_prog.c:780
-msgid ""
-"The following list contain all the coded character sets known. This does\n"
-"not necessarily mean that all combinations of these names can be used for\n"
-"the FROM and TO command line parameters. One coded character set can be\n"
-"listed with several different names (aliases).\n"
-"\n"
-" "
-msgstr ""
-
-#: iconv/iconvconfig.c:111
-msgid "Create fastloading iconv module configuration file."
-msgstr ""
-
-#: iconv/iconvconfig.c:115
-msgid "[DIR...]"
-msgstr ""
-
-#: iconv/iconvconfig.c:128
-msgid "Prefix used for all file accesses"
-msgstr ""
-
-#: iconv/iconvconfig.c:129
-msgid ""
-"Put output in FILE instead of installed location (--prefix does not apply to "
-"FILE)"
-msgstr ""
-
-#: iconv/iconvconfig.c:133
-msgid "Do not search standard directories, only those on the command line"
-msgstr ""
-
-#: iconv/iconvconfig.c:302
-msgid "Directory arguments required when using --nostdlib"
-msgstr ""
-
-#: iconv/iconvconfig.c:344 locale/programs/localedef.c:292
-msgid "no output file produced because warning were issued"
-msgstr ""
-
-#: iconv/iconvconfig.c:430
-msgid "while inserting in search tree"
-msgstr ""
-
-#: iconv/iconvconfig.c:1238
-msgid "cannot generate output file"
-msgstr ""
-
-#: locale/programs/charmap-dir.c:59
-#, c-format
-msgid "cannot read character map directory `%s'"
-msgstr ""
-
-#: locale/programs/charmap.c:139
-#, c-format
-msgid "character map file `%s' not found"
-msgstr ""
-
-#: locale/programs/charmap.c:197
-#, c-format
-msgid "default character map file `%s' not found"
-msgstr ""
-
-#: locale/programs/charmap.c:260
-#, c-format
-msgid ""
-"character map `%s' is not ASCII compatible, locale not ISO C compliant\n"
-msgstr ""
-
-#: locale/programs/charmap.c:339
-#, c-format
-msgid "%s: <mb_cur_max> must be greater than <mb_cur_min>\n"
-msgstr ""
-
-#: locale/programs/charmap.c:359 locale/programs/charmap.c:376
-#: locale/programs/repertoire.c:176
-#, c-format
-msgid "syntax error in prolog: %s"
-msgstr ""
-
-#: locale/programs/charmap.c:360
-msgid "invalid definition"
-msgstr ""
-
-#: locale/programs/charmap.c:377 locale/programs/locfile.c:127
-#: locale/programs/locfile.c:154 locale/programs/repertoire.c:177
-msgid "bad argument"
-msgstr ""
-
-#: locale/programs/charmap.c:405
-#, c-format
-msgid "duplicate definition of <%s>"
-msgstr ""
-
-#: locale/programs/charmap.c:412
-#, c-format
-msgid "value for <%s> must be 1 or greater"
-msgstr ""
-
-#: locale/programs/charmap.c:424
-#, c-format
-msgid "value of <%s> must be greater or equal than the value of <%s>"
-msgstr ""
-
-#: locale/programs/charmap.c:447 locale/programs/repertoire.c:185
-#, c-format
-msgid "argument to <%s> must be a single character"
-msgstr ""
-
-#: locale/programs/charmap.c:473
-msgid "character sets with locking states are not supported"
-msgstr ""
-
-#: locale/programs/charmap.c:500 locale/programs/charmap.c:554
-#: locale/programs/charmap.c:586 locale/programs/charmap.c:680
-#: locale/programs/charmap.c:735 locale/programs/charmap.c:776
-#: locale/programs/charmap.c:817
-#, c-format
-msgid "syntax error in %s definition: %s"
-msgstr ""
-
-#: locale/programs/charmap.c:501 locale/programs/charmap.c:681
-#: locale/programs/charmap.c:777 locale/programs/repertoire.c:232
-msgid "no symbolic name given"
-msgstr ""
-
-#: locale/programs/charmap.c:555
-msgid "invalid encoding given"
-msgstr ""
-
-#: locale/programs/charmap.c:564
-msgid "too few bytes in character encoding"
-msgstr ""
-
-#: locale/programs/charmap.c:566
-msgid "too many bytes in character encoding"
-msgstr ""
-
-#: locale/programs/charmap.c:588 locale/programs/charmap.c:736
-#: locale/programs/charmap.c:819 locale/programs/repertoire.c:298
-msgid "no symbolic name given for end of range"
-msgstr ""
-
-#: locale/programs/charmap.c:612 locale/programs/locfile.c:819
-#: locale/programs/repertoire.c:315
-#, c-format
-msgid "`%1$s' definition does not end with `END %1$s'"
-msgstr ""
-
-#: locale/programs/charmap.c:645
-msgid "only WIDTH definitions are allowed to follow the CHARMAP definition"
-msgstr ""
-
-#: locale/programs/charmap.c:653 locale/programs/charmap.c:716
-#, c-format
-msgid "value for %s must be an integer"
-msgstr ""
-
-#: locale/programs/charmap.c:844
-#, c-format
-msgid "%s: error in state machine"
-msgstr ""
-
-#: locale/programs/charmap.c:852 locale/programs/ld-address.c:605
-#: locale/programs/ld-collate.c:2650 locale/programs/ld-collate.c:3818
-#: locale/programs/ld-ctype.c:2226 locale/programs/ld-ctype.c:2995
-#: locale/programs/ld-identification.c:469
-#: locale/programs/ld-measurement.c:255 locale/programs/ld-messages.c:349
-#: locale/programs/ld-monetary.c:958 locale/programs/ld-name.c:324
-#: locale/programs/ld-numeric.c:392 locale/programs/ld-paper.c:258
-#: locale/programs/ld-telephone.c:330 locale/programs/ld-time.c:1220
-#: locale/programs/locfile.c:826 locale/programs/repertoire.c:326
-#, c-format
-msgid "%s: premature end of file"
-msgstr ""
-
-#: locale/programs/charmap.c:871 locale/programs/charmap.c:882
-#, c-format
-msgid "unknown character `%s'"
-msgstr ""
-
-#: locale/programs/charmap.c:890
-#, c-format
-msgid ""
-"number of bytes for byte sequence of beginning and end of range not the "
-"same: %d vs %d"
-msgstr ""
-
-#: locale/programs/charmap.c:995 locale/programs/ld-collate.c:2930
-#: locale/programs/repertoire.c:421
-msgid "invalid names for character range"
-msgstr ""
-
-#: locale/programs/charmap.c:1007 locale/programs/repertoire.c:433
-msgid "hexadecimal range format should use only capital characters"
-msgstr ""
-
-#: locale/programs/charmap.c:1025
-#, c-format
-msgid "<%s> and <%s> are illegal names for range"
-msgstr ""
-
-#: locale/programs/charmap.c:1031
-msgid "upper limit in range is not higher then lower limit"
-msgstr ""
-
-#: locale/programs/charmap.c:1089
-msgid "resulting bytes for range not representable."
-msgstr ""
-
-#: locale/programs/ld-address.c:134 locale/programs/ld-collate.c:1534
-#: locale/programs/ld-ctype.c:421 locale/programs/ld-identification.c:134
-#: locale/programs/ld-measurement.c:95 locale/programs/ld-messages.c:98
-#: locale/programs/ld-monetary.c:194 locale/programs/ld-name.c:95
-#: locale/programs/ld-numeric.c:99 locale/programs/ld-paper.c:92
-#: locale/programs/ld-telephone.c:95 locale/programs/ld-time.c:160
-#, c-format
-msgid "No definition for %s category found"
-msgstr ""
-
-#: locale/programs/ld-address.c:145 locale/programs/ld-address.c:183
-#: locale/programs/ld-address.c:201 locale/programs/ld-address.c:228
-#: locale/programs/ld-address.c:290 locale/programs/ld-address.c:309
-#: locale/programs/ld-address.c:322 locale/programs/ld-identification.c:147
-#: locale/programs/ld-measurement.c:106 locale/programs/ld-monetary.c:206
-#: locale/programs/ld-monetary.c:250 locale/programs/ld-monetary.c:266
-#: locale/programs/ld-monetary.c:278 locale/programs/ld-name.c:106
-#: locale/programs/ld-name.c:143 locale/programs/ld-numeric.c:113
-#: locale/programs/ld-numeric.c:127 locale/programs/ld-paper.c:103
-#: locale/programs/ld-paper.c:112 locale/programs/ld-telephone.c:106
-#: locale/programs/ld-telephone.c:163 locale/programs/ld-time.c:176
-#: locale/programs/ld-time.c:197
-#, c-format
-msgid "%s: field `%s' not defined"
-msgstr ""
-
-#: locale/programs/ld-address.c:157 locale/programs/ld-address.c:209
-#: locale/programs/ld-address.c:235 locale/programs/ld-address.c:265
-#: locale/programs/ld-name.c:118 locale/programs/ld-telephone.c:118
-#, c-format
-msgid "%s: field `%s' must not be empty"
-msgstr ""
-
-#: locale/programs/ld-address.c:169
-#, c-format
-msgid "%s: invalid escape `%%%c' sequence in field `%s'"
-msgstr ""
-
-#: locale/programs/ld-address.c:220
-#, c-format
-msgid "%s: terminology language code `%s' not defined"
-msgstr ""
-
-#: locale/programs/ld-address.c:247 locale/programs/ld-address.c:276
-#, c-format
-msgid "%s: language abbreviation `%s' not defined"
-msgstr ""
-
-#: locale/programs/ld-address.c:254 locale/programs/ld-address.c:282
-#: locale/programs/ld-address.c:316 locale/programs/ld-address.c:328
-#, c-format
-msgid "%s: `%s' value does not match `%s' value"
-msgstr ""
-
-#: locale/programs/ld-address.c:301
-#, c-format
-msgid "%s: numeric country code `%d' not valid"
-msgstr ""
-
-#: locale/programs/ld-address.c:497 locale/programs/ld-address.c:534
-#: locale/programs/ld-address.c:572 locale/programs/ld-ctype.c:2602
-#: locale/programs/ld-identification.c:365
-#: locale/programs/ld-measurement.c:222 locale/programs/ld-messages.c:302
-#: locale/programs/ld-monetary.c:700 locale/programs/ld-monetary.c:735
-#: locale/programs/ld-monetary.c:776 locale/programs/ld-name.c:281
-#: locale/programs/ld-numeric.c:264 locale/programs/ld-paper.c:225
-#: locale/programs/ld-telephone.c:289 locale/programs/ld-time.c:1109
-#: locale/programs/ld-time.c:1151
-#, c-format
-msgid "%s: field `%s' declared more than once"
-msgstr ""
-
-#: locale/programs/ld-address.c:501 locale/programs/ld-address.c:539
-#: locale/programs/ld-identification.c:369 locale/programs/ld-messages.c:312
-#: locale/programs/ld-monetary.c:704 locale/programs/ld-monetary.c:739
-#: locale/programs/ld-name.c:285 locale/programs/ld-numeric.c:268
-#: locale/programs/ld-telephone.c:293 locale/programs/ld-time.c:1003
-#: locale/programs/ld-time.c:1072 locale/programs/ld-time.c:1114
-#, c-format
-msgid "%s: unknown character in field `%s'"
-msgstr ""
-
-#: locale/programs/ld-address.c:586 locale/programs/ld-collate.c:3800
-#: locale/programs/ld-ctype.c:2975 locale/programs/ld-identification.c:450
-#: locale/programs/ld-measurement.c:236 locale/programs/ld-messages.c:331
-#: locale/programs/ld-monetary.c:940 locale/programs/ld-name.c:306
-#: locale/programs/ld-numeric.c:374 locale/programs/ld-paper.c:240
-#: locale/programs/ld-telephone.c:312 locale/programs/ld-time.c:1202
-#, c-format
-msgid "%s: incomplete `END' line"
-msgstr ""
-
-#: locale/programs/ld-address.c:589 locale/programs/ld-collate.c:2653
-#: locale/programs/ld-collate.c:3802 locale/programs/ld-ctype.c:2229
-#: locale/programs/ld-ctype.c:2978 locale/programs/ld-identification.c:453
-#: locale/programs/ld-measurement.c:239 locale/programs/ld-messages.c:333
-#: locale/programs/ld-monetary.c:942 locale/programs/ld-name.c:308
-#: locale/programs/ld-numeric.c:376 locale/programs/ld-paper.c:242
-#: locale/programs/ld-telephone.c:314 locale/programs/ld-time.c:1204
-#, c-format
-msgid "%1$s: definition does not end with `END %1$s'"
-msgstr ""
-
-#: locale/programs/ld-address.c:596 locale/programs/ld-collate.c:523
-#: locale/programs/ld-collate.c:575 locale/programs/ld-collate.c:871
-#: locale/programs/ld-collate.c:884 locale/programs/ld-collate.c:2640
-#: locale/programs/ld-collate.c:3809 locale/programs/ld-ctype.c:1957
-#: locale/programs/ld-ctype.c:2216 locale/programs/ld-ctype.c:2800
-#: locale/programs/ld-ctype.c:2986 locale/programs/ld-identification.c:460
-#: locale/programs/ld-measurement.c:246 locale/programs/ld-messages.c:340
-#: locale/programs/ld-monetary.c:949 locale/programs/ld-name.c:315
-#: locale/programs/ld-numeric.c:383 locale/programs/ld-paper.c:249
-#: locale/programs/ld-telephone.c:321 locale/programs/ld-time.c:1211
-#, c-format
-msgid "%s: syntax error"
-msgstr ""
-
-#: locale/programs/ld-collate.c:398
-#, c-format
-msgid "`%.*s' already defined in charmap"
-msgstr ""
-
-#: locale/programs/ld-collate.c:407
-#, c-format
-msgid "`%.*s' already defined in repertoire"
-msgstr ""
-
-#: locale/programs/ld-collate.c:414
-#, c-format
-msgid "`%.*s' already defined as collating symbol"
-msgstr ""
-
-#: locale/programs/ld-collate.c:421
-#, c-format
-msgid "`%.*s' already defined as collating element"
-msgstr ""
-
-#: locale/programs/ld-collate.c:452 locale/programs/ld-collate.c:478
-#, c-format
-msgid "%s: `forward' and `backward' are mutually excluding each other"
-msgstr ""
-
-#: locale/programs/ld-collate.c:462 locale/programs/ld-collate.c:488
-#: locale/programs/ld-collate.c:504
-#, c-format
-msgid "%s: `%s' mentioned more than once in definition of weight %d"
-msgstr ""
-
-#: locale/programs/ld-collate.c:560
-#, c-format
-msgid "%s: too many rules; first entry only had %d"
-msgstr ""
-
-#: locale/programs/ld-collate.c:596
-#, c-format
-msgid "%s: not enough sorting rules"
-msgstr ""
-
-#: locale/programs/ld-collate.c:761
-#, c-format
-msgid "%s: empty weight string not allowed"
-msgstr ""
-
-#: locale/programs/ld-collate.c:856
-#, c-format
-msgid "%s: weights must use the same ellipsis symbol as the name"
-msgstr ""
-
-#: locale/programs/ld-collate.c:912
-#, c-format
-msgid "%s: too many values"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1031 locale/programs/ld-collate.c:1206
-#, c-format
-msgid "order for `%.*s' already defined at %s:%Zu"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1081
-#, c-format
-msgid "%s: the start and the end symbol of a range must stand for characters"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1108
-#, c-format
-msgid ""
-"%s: byte sequences of first and last character must have the same length"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1150
-#, c-format
-msgid ""
-"%s: byte sequence of first character of sequence is not lower than that of "
-"the last character"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1275
-#, c-format
-msgid "%s: symbolic range ellipsis must not directly follow `order_start'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1279
-#, c-format
-msgid ""
-"%s: symbolic range ellipsis must not be directly followed by `order_end'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1299 locale/programs/ld-ctype.c:1477
-#, c-format
-msgid "`%s' and `%.*s' are no valid names for symbolic range"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1348 locale/programs/ld-collate.c:3737
-#, c-format
-msgid "%s: order for `%.*s' already defined at %s:%Zu"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1357
-#, c-format
-msgid "%s: `%s' must be a character"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1550
-#, c-format
-msgid ""
-"%s: `position' must be used for a specific level in all sections or none"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1575
-#, c-format
-msgid "symbol `%s' not defined"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1651 locale/programs/ld-collate.c:1757
-#, c-format
-msgid "symbol `%s' has the same encoding as"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1655 locale/programs/ld-collate.c:1761
-#, c-format
-msgid "symbol `%s'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1803
-msgid "no definition of `UNDEFINED'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:1832
-msgid "too many errors; giving up"
-msgstr ""
-
-#: locale/programs/ld-collate.c:2735
-#, c-format
-msgid "%s: duplicate definition of `%s'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:2771
-#, c-format
-msgid "%s: duplicate declaration of section `%s'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:2910
-#, c-format
-msgid "%s: unknown character in collating symbol name"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3042
-#, c-format
-msgid "%s: unknown character in equivalent definition name"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3055
-#, c-format
-msgid "%s: unknown character in equivalent definition value"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3065
-#, c-format
-msgid "%s: unknown symbol `%s' in equivalent definition"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3074
-msgid "error while adding equivalent collating symbol"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3104
-#, c-format
-msgid "duplicate definition of script `%s'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3152
-#, c-format
-msgid "%s: unknown section name `%s'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3180
-#, c-format
-msgid "%s: multiple order definitions for section `%s'"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3205
-#, c-format
-msgid "%s: invalid number of sorting rules"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3232
-#, c-format
-msgid "%s: multiple order definitions for unnamed section"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3286 locale/programs/ld-collate.c:3414
-#: locale/programs/ld-collate.c:3778
-#, c-format
-msgid "%s: missing `order_end' keyword"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3347
-#, c-format
-msgid "%s: order for collating symbol %.*s not yet defined"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3365
-#, c-format
-msgid "%s: order for collating element %.*s not yet defined"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3376
-#, c-format
-msgid "%s: cannot reorder after %.*s: symbol not known"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3428 locale/programs/ld-collate.c:3790
-#, c-format
-msgid "%s: missing `reorder-end' keyword"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3462 locale/programs/ld-collate.c:3662
-#, c-format
-msgid "%s: section `%.*s' not known"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3527
-#, c-format
-msgid "%s: bad symbol <%.*s>"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3725
-#, c-format
-msgid "%s: cannot have `%s' as end of ellipsis range"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3774
-#, c-format
-msgid "%s: empty category description not allowed"
-msgstr ""
-
-#: locale/programs/ld-collate.c:3793
-#, c-format
-msgid "%s: missing `reorder-sections-end' keyword"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:440
-msgid "No character set name specified in charmap"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:469
-#, c-format
-msgid "character L'\\u%0*x' in class `%s' must be in class `%s'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:484
-#, c-format
-msgid "character L'\\u%0*x' in class `%s' must not be in class `%s'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:498 locale/programs/ld-ctype.c:556
-#, c-format
-msgid "internal error in %s, line %u"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:527
-#, c-format
-msgid "character '%s' in class `%s' must be in class `%s'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:543
-#, c-format
-msgid "character '%s' in class `%s' must not be in class `%s'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:573 locale/programs/ld-ctype.c:611
-#, c-format
-msgid "<SP> character not in class `%s'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:585 locale/programs/ld-ctype.c:622
-#, c-format
-msgid "<SP> character must not be in class `%s'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:600
-msgid "character <SP> not defined in character map"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:714
-msgid "`digit' category has not entries in groups of ten"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:763
-msgid "no input digits defined and none of the standard names in the charmap"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:828
-msgid "not all characters used in `outdigit' are available in the charmap"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:845
-msgid "not all characters used in `outdigit' are available in the repertoire"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1245
-#, c-format
-msgid "character class `%s' already defined"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1251
-#, c-format
-msgid "implementation limit: no more than %Zd character classes allowed"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1277
-#, c-format
-msgid "character map `%s' already defined"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1283
-#, c-format
-msgid "implementation limit: no more than %d character maps allowed"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1548 locale/programs/ld-ctype.c:1673
-#: locale/programs/ld-ctype.c:1779 locale/programs/ld-ctype.c:2465
-#: locale/programs/ld-ctype.c:3461
-#, c-format
-msgid "%s: field `%s' does not contain exactly ten entries"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1576 locale/programs/ld-ctype.c:2147
-#, c-format
-msgid "to-value <U%0*X> of range is smaller than from-value <U%0*X>"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1703
-msgid "start and end character sequence of range must have the same length"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:1710
-msgid "to-value character sequence is smaller than from-value sequence"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2067 locale/programs/ld-ctype.c:2118
-msgid "premature end of `translit_ignore' definition"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2073 locale/programs/ld-ctype.c:2124
-#: locale/programs/ld-ctype.c:2166
-msgid "syntax error"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2297
-#, c-format
-msgid "%s: syntax error in definition of new character class"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2312
-#, c-format
-msgid "%s: syntax error in definition of new character map"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2487
-msgid "ellipsis range must be marked by two operands of same type"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2496
-msgid ""
-"with symbolic name range values the absolute ellipsis `...' must not be used"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2511
-msgid ""
-"with UCS range values one must use the hexadecimal symbolic ellipsis `..'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2525
-msgid ""
-"with character code range values one must use the absolute ellipsis `...'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2676
-#, c-format
-msgid "duplicated definition for mapping `%s'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2762 locale/programs/ld-ctype.c:2906
-#, c-format
-msgid "%s: `translit_start' section does not end with `translit_end'"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2857
-#, c-format
-msgid "%s: duplicate `default_missing' definition"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2862
-msgid "previous definition was here"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:2884
-#, c-format
-msgid "%s: no representable `default_missing' definition found"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3037
-#, c-format
-msgid "%s: character `%s' not defined in charmap while needed as default value"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3042 locale/programs/ld-ctype.c:3126
-#: locale/programs/ld-ctype.c:3146 locale/programs/ld-ctype.c:3167
-#: locale/programs/ld-ctype.c:3188 locale/programs/ld-ctype.c:3209
-#: locale/programs/ld-ctype.c:3230 locale/programs/ld-ctype.c:3270
-#: locale/programs/ld-ctype.c:3291 locale/programs/ld-ctype.c:3358
-#, c-format
-msgid "%s: character `%s' in charmap not representable with one byte"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3121 locale/programs/ld-ctype.c:3141
-#: locale/programs/ld-ctype.c:3183 locale/programs/ld-ctype.c:3204
-#: locale/programs/ld-ctype.c:3225 locale/programs/ld-ctype.c:3265
-#: locale/programs/ld-ctype.c:3286 locale/programs/ld-ctype.c:3353
-#: locale/programs/ld-ctype.c:3395 locale/programs/ld-ctype.c:3420
-#, c-format
-msgid "%s: character `%s' not defined while needed as default value"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3162
-#, c-format
-msgid "character `%s' not defined while needed as default value"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3402 locale/programs/ld-ctype.c:3427
-#, c-format
-msgid ""
-"%s: character `%s' needed as default value not representable with one byte"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3482
-msgid "no output digits defined and none of the standard names in the charmap"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3773
-#, c-format
-msgid "%s: transliteration data from locale `%s' not available"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3869
-#, c-format
-msgid "%s: table for class \"%s\": %lu bytes\n"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:3938
-#, c-format
-msgid "%s: table for map \"%s\": %lu bytes\n"
-msgstr ""
-
-#: locale/programs/ld-ctype.c:4071
-#, c-format
-msgid "%s: table for width: %lu bytes\n"
-msgstr ""
-
-#: locale/programs/ld-identification.c:171
-#, c-format
-msgid "%s: no identification for category `%s'"
-msgstr ""
-
-#: locale/programs/ld-identification.c:436
-#, c-format
-msgid "%s: duplicate category version definition"
-msgstr ""
-
-#: locale/programs/ld-measurement.c:114
-#, c-format
-msgid "%s: invalid value for field `%s'"
-msgstr ""
-
-#: locale/programs/ld-messages.c:115 locale/programs/ld-messages.c:149
-#, c-format
-msgid "%s: field `%s' undefined"
-msgstr ""
-
-#: locale/programs/ld-messages.c:122 locale/programs/ld-messages.c:156
-#, c-format
-msgid "%s: value for field `%s' must not be an empty string"
-msgstr ""
-
-#: locale/programs/ld-messages.c:138 locale/programs/ld-messages.c:172
-#, c-format
-msgid "%s: no correct regular expression for field `%s': %s"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:224
-#, c-format
-msgid "%s: value of field `int_curr_symbol' has wrong length"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:237
-#, c-format
-msgid ""
-"%s: value of field `int_curr_symbol' does not correspond to a valid name in "
-"ISO 4217"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:256 locale/programs/ld-numeric.c:119
-#, c-format
-msgid "%s: value for field `%s' must not be the empty string"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:284 locale/programs/ld-monetary.c:314
-#, c-format
-msgid "%s: value for field `%s' must be in range %d...%d"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:746 locale/programs/ld-numeric.c:275
-#, c-format
-msgid "%s: value for field `%s' must be a single character"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:843 locale/programs/ld-numeric.c:319
-#, c-format
-msgid "%s: `-1' must be last entry in `%s' field"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:865 locale/programs/ld-numeric.c:340
-#, c-format
-msgid "%s: values for field `%s' must be smaller than 127"
-msgstr ""
-
-#: locale/programs/ld-monetary.c:908
-msgid "conversion rate value cannot be zero"
-msgstr ""
-
-#: locale/programs/ld-name.c:130 locale/programs/ld-telephone.c:127
-#: locale/programs/ld-telephone.c:150
-#, c-format
-msgid "%s: invalid escape sequence in field `%s'"
-msgstr ""
-
-#: locale/programs/ld-time.c:248
-#, c-format
-msgid "%s: direction flag in string %Zd in `era' field is not '+' nor '-'"
-msgstr ""
-
-#: locale/programs/ld-time.c:259
-#, c-format
-msgid ""
-"%s: direction flag in string %Zd in `era' field is not a single character"
-msgstr ""
-
-#: locale/programs/ld-time.c:272
-#, c-format
-msgid "%s: invalid number for offset in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:280
-#, c-format
-msgid "%s: garbage at end of offset value in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:331
-#, c-format
-msgid "%s: invalid starting date in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:340
-#, c-format
-msgid "%s: garbage at end of starting date in string %Zd in `era' field "
-msgstr ""
-
-#: locale/programs/ld-time.c:359
-#, c-format
-msgid "%s: starting date is invalid in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:408
-#, c-format
-msgid "%s: invalid stopping date in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:417
-#, c-format
-msgid "%s: garbage at end of stopping date in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:436
-#, c-format
-msgid "%s: stopping date is invalid in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:445
-#, c-format
-msgid "%s: missing era name in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:457
-#, c-format
-msgid "%s: missing era format in string %Zd in `era' field"
-msgstr ""
-
-#: locale/programs/ld-time.c:486
-#, c-format
-msgid "%s: third operand for value of field `%s' must not be larger than %d"
-msgstr ""
-
-#: locale/programs/ld-time.c:494 locale/programs/ld-time.c:502
-#, c-format
-msgid "%s: values of field `%s' must not be larger than %d"
-msgstr ""
-
-#: locale/programs/ld-time.c:510
-#, c-format
-msgid "%s: values for field `%s' must not be larger than %d"
-msgstr ""
-
-#: locale/programs/ld-time.c:987
-#, c-format
-msgid "%s: too few values for field `%s'"
-msgstr ""
-
-#: locale/programs/ld-time.c:1032
-msgid "extra trailing semicolon"
-msgstr ""
-
-#: locale/programs/ld-time.c:1035
-#, c-format
-msgid "%s: too many values for field `%s'"
-msgstr ""
-
-#: locale/programs/linereader.c:131
-msgid "trailing garbage at end of line"
-msgstr ""
-
-#: locale/programs/linereader.c:305
-msgid "garbage at end of number"
-msgstr ""
-
-#: locale/programs/linereader.c:417
-msgid "garbage at end of character code specification"
-msgstr ""
-
-#: locale/programs/linereader.c:503
-msgid "unterminated symbolic name"
-msgstr ""
-
-#: locale/programs/linereader.c:567 catgets/gencat.c:1196
-msgid "invalid escape sequence"
-msgstr ""
-
-#: locale/programs/linereader.c:630
-msgid "illegal escape sequence at end of string"
-msgstr ""
-
-#: locale/programs/linereader.c:634 locale/programs/linereader.c:862
-msgid "unterminated string"
-msgstr ""
-
-#: locale/programs/linereader.c:676
-msgid "non-symbolic character value should not be used"
-msgstr ""
-
-#: locale/programs/linereader.c:823
-#, c-format
-msgid "symbol `%.*s' not in charmap"
-msgstr ""
-
-#: locale/programs/linereader.c:844
-#, c-format
-msgid "symbol `%.*s' not in repertoire map"
-msgstr ""
-
-#: locale/programs/locale.c:75
-msgid "System information:"
-msgstr ""
-
-#: locale/programs/locale.c:77
-msgid "Write names of available locales"
-msgstr ""
-
-#: locale/programs/locale.c:79
-msgid "Write names of available charmaps"
-msgstr ""
-
-#: locale/programs/locale.c:80
-msgid "Modify output format:"
-msgstr ""
-
-#: locale/programs/locale.c:81
-msgid "Write names of selected categories"
-msgstr ""
-
-#: locale/programs/locale.c:82
-msgid "Write names of selected keywords"
-msgstr ""
-
-#: locale/programs/locale.c:83
-msgid "Print more information"
-msgstr ""
-
-#: locale/programs/locale.c:88
-msgid ""
-"Get locale-specific information.\013For bug reporting instructions, please "
-"see:\n"
-"<http://www.gnu.org/software/libc/bugs.html>.\n"
-msgstr ""
-
-#: locale/programs/locale.c:93
-msgid ""
-"NAME\n"
-"[-a|-m]"
-msgstr ""
-
-#: locale/programs/locale.c:194
-msgid "Cannot set LC_CTYPE to default locale"
-msgstr ""
-
-#: locale/programs/locale.c:196
-msgid "Cannot set LC_MESSAGES to default locale"
-msgstr ""
-
-#: locale/programs/locale.c:209
-msgid "Cannot set LC_COLLATE to default locale"
-msgstr ""
-
-#: locale/programs/locale.c:225
-msgid "Cannot set LC_ALL to default locale"
-msgstr ""
-
-#: locale/programs/locale.c:501
-msgid "while preparing output"
-msgstr ""
-
-#: locale/programs/localedef.c:121
-msgid "Input Files:"
-msgstr ""
-
-#: locale/programs/localedef.c:123
-msgid "Symbolic character names defined in FILE"
-msgstr ""
-
-#: locale/programs/localedef.c:124
-msgid "Source definitions are found in FILE"
-msgstr ""
-
-#: locale/programs/localedef.c:126
-msgid "FILE contains mapping from symbolic names to UCS4 values"
-msgstr ""
-
-#: locale/programs/localedef.c:130
-msgid "Create output even if warning messages were issued"
-msgstr ""
-
-#: locale/programs/localedef.c:131
-msgid "Create old-style tables"
-msgstr ""
-
-#: locale/programs/localedef.c:132
-msgid "Optional output file prefix"
-msgstr ""
-
-#: locale/programs/localedef.c:133
-msgid "Be strictly POSIX conform"
-msgstr ""
-
-#: locale/programs/localedef.c:135
-msgid "Suppress warnings and information messages"
-msgstr ""
-
-#: locale/programs/localedef.c:136
-msgid "Print more messages"
-msgstr ""
-
-#: locale/programs/localedef.c:137
-msgid "Archive control:"
-msgstr ""
-
-#: locale/programs/localedef.c:139
-msgid "Don't add new data to archive"
-msgstr ""
-
-#: locale/programs/localedef.c:141
-msgid "Add locales named by parameters to archive"
-msgstr ""
-
-#: locale/programs/localedef.c:142
-msgid "Replace existing archive content"
-msgstr ""
-
-#: locale/programs/localedef.c:144
-msgid "Remove locales named by parameters from archive"
-msgstr ""
-
-#: locale/programs/localedef.c:145
-msgid "List content of archive"
-msgstr ""
-
-#: locale/programs/localedef.c:147
-msgid "locale.alias file to consult when making archive"
-msgstr ""
-
-#: locale/programs/localedef.c:152
-msgid "Compile locale specification"
-msgstr ""
-
-#: locale/programs/localedef.c:155
-msgid ""
-"NAME\n"
-"[--add-to-archive|--delete-from-archive] FILE...\n"
-"--list-archive [FILE]"
-msgstr ""
-
-#: locale/programs/localedef.c:233
-msgid "cannot create directory for output files"
-msgstr ""
-
-#: locale/programs/localedef.c:244
-msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'"
-msgstr ""
-
-#: locale/programs/localedef.c:258 locale/programs/localedef.c:274
-#: locale/programs/localedef.c:600 locale/programs/localedef.c:620
-#, c-format
-msgid "cannot open locale definition file `%s'"
-msgstr ""
-
-#: locale/programs/localedef.c:286
-#, c-format
-msgid "cannot write output files to `%s'"
-msgstr ""
-
-#: locale/programs/localedef.c:367
-#, c-format
-msgid ""
-"System's directory for character maps : %s\n"
-" repertoire maps: %s\n"
-" locale path : %s\n"
-"%s"
-msgstr ""
-
-#: locale/programs/localedef.c:568
-msgid "circular dependencies between locale definitions"
-msgstr ""
-
-#: locale/programs/localedef.c:574
-#, c-format
-msgid "cannot add already read locale `%s' a second time"
-msgstr ""
-
-#: locale/programs/locarchive.c:89 locale/programs/locarchive.c:258
-msgid "cannot create temporary file"
-msgstr ""
-
-#: locale/programs/locarchive.c:118 locale/programs/locarchive.c:304
-msgid "cannot initialize archive file"
-msgstr ""
-
-#: locale/programs/locarchive.c:125 locale/programs/locarchive.c:311
-msgid "cannot resize archive file"
-msgstr ""
-
-#: locale/programs/locarchive.c:134 locale/programs/locarchive.c:320
-#: locale/programs/locarchive.c:508
-msgid "cannot map archive header"
-msgstr ""
-
-#: locale/programs/locarchive.c:156
-msgid "failed to create new locale archive"
-msgstr ""
-
-#: locale/programs/locarchive.c:168
-msgid "cannot change mode of new locale archive"
-msgstr ""
-
-#: locale/programs/locarchive.c:252
-msgid "cannot map locale archive file"
-msgstr ""
-
-#: locale/programs/locarchive.c:328
-msgid "cannot lock new archive"
-msgstr ""
-
-#: locale/programs/locarchive.c:377
-msgid "cannot extend locale archive file"
-msgstr ""
-
-#: locale/programs/locarchive.c:386
-msgid "cannot change mode of resized locale archive"
-msgstr ""
-
-#: locale/programs/locarchive.c:394
-msgid "cannot rename new archive"
-msgstr ""
-
-#: locale/programs/locarchive.c:447
-#, c-format
-msgid "cannot open locale archive \"%s\""
-msgstr ""
-
-#: locale/programs/locarchive.c:452
-#, c-format
-msgid "cannot stat locale archive \"%s\""
-msgstr ""
-
-#: locale/programs/locarchive.c:471
-#, c-format
-msgid "cannot lock locale archive \"%s\""
-msgstr ""
-
-#: locale/programs/locarchive.c:494
-msgid "cannot read archive header"
-msgstr ""
-
-#: locale/programs/locarchive.c:554
-#, c-format
-msgid "locale '%s' already exists"
-msgstr ""
-
-#: locale/programs/locarchive.c:785 locale/programs/locarchive.c:800
-#: locale/programs/locarchive.c:812 locale/programs/locarchive.c:824
-#: locale/programs/locfile.c:344
-msgid "cannot add to locale archive"
-msgstr ""
-
-#: locale/programs/locarchive.c:979
-#, c-format
-msgid "locale alias file `%s' not found"
-msgstr ""
-
-#: locale/programs/locarchive.c:1123
-#, c-format
-msgid "Adding %s\n"
-msgstr ""
-
-#: locale/programs/locarchive.c:1129
-#, c-format
-msgid "stat of \"%s\" failed: %s: ignored"
-msgstr ""
-
-#: locale/programs/locarchive.c:1135
-#, c-format
-msgid "\"%s\" is no directory; ignored"
-msgstr ""
-
-#: locale/programs/locarchive.c:1142
-#, c-format
-msgid "cannot open directory \"%s\": %s: ignored"
-msgstr ""
-
-#: locale/programs/locarchive.c:1214
-#, c-format
-msgid "incomplete set of locale files in \"%s\""
-msgstr ""
-
-#: locale/programs/locarchive.c:1278
-#, c-format
-msgid "cannot read all files in \"%s\": ignored"
-msgstr ""
-
-#: locale/programs/locarchive.c:1348
-#, c-format
-msgid "locale \"%s\" not in archive"
-msgstr ""
-
-#: locale/programs/locfile.c:133
-#, c-format
-msgid "argument to `%s' must be a single character"
-msgstr ""
-
-#: locale/programs/locfile.c:252
-msgid "syntax error: not inside a locale definition section"
-msgstr ""
-
-#: locale/programs/locfile.c:626
-#, c-format
-msgid "cannot open output file `%s' for category `%s'"
-msgstr ""
-
-#: locale/programs/locfile.c:650
-#, c-format
-msgid "failure while writing data for category `%s'"
-msgstr ""
-
-#: locale/programs/locfile.c:746
-#, c-format
-msgid "cannot create output file `%s' for category `%s'"
-msgstr ""
-
-#: locale/programs/locfile.c:782
-msgid "expect string argument for `copy'"
-msgstr ""
-
-#: locale/programs/locfile.c:786
-msgid "locale name should consist only of portable characters"
-msgstr ""
-
-#: locale/programs/locfile.c:805
-msgid "no other keyword shall be specified when `copy' is used"
-msgstr ""
-
-#: locale/programs/repertoire.c:231 locale/programs/repertoire.c:272
-#: locale/programs/repertoire.c:297
-#, c-format
-msgid "syntax error in repertoire map definition: %s"
-msgstr ""
-
-#: locale/programs/repertoire.c:273
-msgid "no <Uxxxx> or <Uxxxxxxxx> value given"
-msgstr ""
-
-#: locale/programs/repertoire.c:333
-msgid "cannot safe new repertoire map"
-msgstr ""
-
-#: locale/programs/repertoire.c:344
-#, c-format
-msgid "repertoire map file `%s' not found"
-msgstr ""
-
-#: locale/programs/repertoire.c:451
-#, c-format
-msgid "<%s> and <%s> are invalid names for range"
-msgstr ""
-
-#: locale/programs/repertoire.c:458
-msgid "upper limit in range is not smaller then lower limit"
-msgstr ""
-
-#: locale/programs/xmalloc.c:70 malloc/obstack.c:415 malloc/obstack.c:418
-#: posix/getconf.c:1104 elf/ldconfig.c:1101
-msgid "memory exhausted"
-msgstr ""
-
-#: assert/assert-perr.c:57
-#, c-format
-msgid "%s%s%s:%u: %s%sUnexpected error: %s.\n"
-msgstr ""
-
-#: assert/assert.c:56
-#, c-format
-msgid "%s%s%s:%u: %s%sAssertion `%s' failed.\n"
-msgstr ""
-
-#: intl/tst-codeset.c:40 intl/tst-codeset.c:50 intl/tst-gettext3.c:42
-#: intl/tst-gettext3.c:52
-msgid "cheese"
-msgstr ""
-
-#: intl/tst-gettext2.c:37
-msgid "First string for testing."
-msgstr ""
-
-#: intl/tst-gettext2.c:38
-msgid "Another string for testing."
-msgstr ""
-
-#: catgets/gencat.c:111 catgets/gencat.c:115 nscd/nscd.c:99
-msgid "NAME"
-msgstr ""
-
-#: catgets/gencat.c:112
-msgid "Create C header file NAME containing symbol definitions"
-msgstr ""
-
-#: catgets/gencat.c:114
-msgid "Do not use existing catalog, force new output file"
-msgstr ""
-
-#: catgets/gencat.c:115
-msgid "Write output to file NAME"
-msgstr ""
-
-#: catgets/gencat.c:120
-msgid ""
-"Generate message catalog.\013If INPUT-FILE is -, input is read from standard "
-"input. If OUTPUT-FILE\n"
-"is -, output is written to standard output.\n"
-msgstr ""
-
-#: catgets/gencat.c:125
-msgid ""
-"-o OUTPUT-FILE [INPUT-FILE]...\n"
-"[OUTPUT-FILE [INPUT-FILE]...]"
-msgstr ""
-
-#: catgets/gencat.c:283
-msgid "*standard input*"
-msgstr ""
-
-#: catgets/gencat.c:418 catgets/gencat.c:495
-msgid "illegal set number"
-msgstr ""
-
-#: catgets/gencat.c:445
-msgid "duplicate set definition"
-msgstr ""
-
-#: catgets/gencat.c:447 catgets/gencat.c:624 catgets/gencat.c:678
-msgid "this is the first definition"
-msgstr ""
-
-#: catgets/gencat.c:523
-#, c-format
-msgid "unknown set `%s'"
-msgstr ""
-
-#: catgets/gencat.c:564
-msgid "invalid quote character"
-msgstr ""
-
-#: catgets/gencat.c:577
-#, c-format
-msgid "unknown directive `%s': line ignored"
-msgstr ""
-
-#: catgets/gencat.c:622
-msgid "duplicated message number"
-msgstr ""
-
-#: catgets/gencat.c:675
-msgid "duplicated message identifier"
-msgstr ""
-
-#: catgets/gencat.c:732
-msgid "invalid character: message ignored"
-msgstr ""
-
-#: catgets/gencat.c:775
-msgid "invalid line"
-msgstr ""
-
-#: catgets/gencat.c:829
-msgid "malformed line ignored"
-msgstr ""
-
-#: catgets/gencat.c:993 catgets/gencat.c:1034
-#, c-format
-msgid "cannot open output file `%s'"
-msgstr ""
-
-#: catgets/gencat.c:1218
-msgid "unterminated message"
-msgstr ""
-
-#: catgets/gencat.c:1242
-msgid "while opening old catalog file"
-msgstr ""
-
-#: catgets/gencat.c:1333
-msgid "conversion modules not available"
-msgstr ""
-
-#: catgets/gencat.c:1359
-msgid "cannot determine escape character"
-msgstr ""
-
-#: stdlib/../sysdeps/unix/sysv/linux/ia64/makecontext.c:63
-#, c-format
-msgid "makecontext: does not know how to handle more than 8 arguments\n"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:20 posix/regcomp.c:160
-#: nis/nis_error.c:29 nis/ypclnt.c:793 nis/ypclnt.c:860
-msgid "Success"
-msgstr ""
-
-#. TRANS Operation not permitted; only the owner of the file (or other resource)
-#. TRANS or processes with special privileges can perform the operation.
-#: stdio-common/../sysdeps/gnu/errlist.c:25
-msgid "Operation not permitted"
-msgstr ""
-
-#. TRANS No such file or directory. This is a ``file doesn't exist'' error
-#. TRANS for ordinary files that are referenced in contexts where they are
-#. TRANS expected to already exist.
-#: stdio-common/../sysdeps/gnu/errlist.c:36
-msgid "No such file or directory"
-msgstr ""
-
-#. TRANS No process matches the specified process ID.
-#: stdio-common/../sysdeps/gnu/errlist.c:45
-msgid "No such process"
-msgstr ""
-
-#. TRANS Interrupted function call; an asynchronous signal occurred and prevented
-#. TRANS completion of the call. When this happens, you should try the call
-#. TRANS again.
-#. TRANS
-#. TRANS You can choose to have functions resume after a signal that is handled,
-#. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
-#. TRANS Primitives}.
-#: stdio-common/../sysdeps/gnu/errlist.c:60
-msgid "Interrupted system call"
-msgstr ""
-
-#. TRANS Input/output error; usually used for physical read or write errors.
-#: stdio-common/../sysdeps/gnu/errlist.c:69
-msgid "Input/output error"
-msgstr ""
-
-#. TRANS No such device or address. The system tried to use the device
-#. TRANS represented by a file you specified, and it couldn't find the device.
-#. TRANS This can mean that the device file was installed incorrectly, or that
-#. TRANS the physical device is missing or not correctly attached to the
-#. TRANS computer.
-#: stdio-common/../sysdeps/gnu/errlist.c:82
-msgid "No such device or address"
-msgstr ""
-
-#. TRANS Argument list too long; used when the arguments passed to a new program
-#. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
-#. TRANS File}) occupy too much memory space. This condition never arises in the
-#. TRANS GNU system.
-#: stdio-common/../sysdeps/gnu/errlist.c:94
-msgid "Argument list too long"
-msgstr ""
-
-#. TRANS Invalid executable file format. This condition is detected by the
-#. TRANS @code{exec} functions; see @ref{Executing a File}.
-#: stdio-common/../sysdeps/gnu/errlist.c:104
-msgid "Exec format error"
-msgstr ""
-
-#. TRANS Bad file descriptor; for example, I/O on a descriptor that has been
-#. TRANS closed or reading from a descriptor open only for writing (or vice
-#. TRANS versa).
-#: stdio-common/../sysdeps/gnu/errlist.c:115
-msgid "Bad file descriptor"
-msgstr ""
-
-#. TRANS There are no child processes. This error happens on operations that are
-#. TRANS supposed to manipulate child processes, when there aren't any processes
-#. TRANS to manipulate.
-#: stdio-common/../sysdeps/gnu/errlist.c:126
-msgid "No child processes"
-msgstr ""
-
-#. TRANS Deadlock avoided; allocating a system resource would have resulted in a
-#. TRANS deadlock situation. The system does not guarantee that it will notice
-#. TRANS all such situations. This error means you got lucky and the system
-#. TRANS noticed; it might just hang. @xref{File Locks}, for an example.
-#: stdio-common/../sysdeps/gnu/errlist.c:138
-msgid "Resource deadlock avoided"
-msgstr ""
-
-#. TRANS No memory available. The system cannot allocate more virtual memory
-#. TRANS because its capacity is full.
-#: stdio-common/../sysdeps/gnu/errlist.c:148
-msgid "Cannot allocate memory"
-msgstr ""
-
-#. TRANS Permission denied; the file permissions do not allow the attempted operation.
-#: stdio-common/../sysdeps/gnu/errlist.c:157 nis/nis_error.c:39
-#: nis/ypclnt.c:823
-msgid "Permission denied"
-msgstr ""
-
-#. TRANS Bad address; an invalid pointer was detected.
-#. TRANS In the GNU system, this error never happens; you get a signal instead.
-#: stdio-common/../sysdeps/gnu/errlist.c:167
-msgid "Bad address"
-msgstr ""
-
-#. TRANS A file that isn't a block special file was given in a situation that
-#. TRANS requires one. For example, trying to mount an ordinary file as a file
-#. TRANS system in Unix gives this error.
-#: stdio-common/../sysdeps/gnu/errlist.c:178
-msgid "Block device required"
-msgstr ""
-
-#. TRANS Resource busy; a system resource that can't be shared is already in use.
-#. TRANS For example, if you try to delete a file that is the root of a currently
-#. TRANS mounted filesystem, you get this error.
-#: stdio-common/../sysdeps/gnu/errlist.c:189
-msgid "Device or resource busy"
-msgstr ""
-
-#. TRANS File exists; an existing file was specified in a context where it only
-#. TRANS makes sense to specify a new file.
-#: stdio-common/../sysdeps/gnu/errlist.c:199
-msgid "File exists"
-msgstr ""
-
-#. TRANS An attempt to make an improper link across file systems was detected.
-#. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
-#. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}).
-#: stdio-common/../sysdeps/gnu/errlist.c:210
-msgid "Invalid cross-device link"
-msgstr ""
-
-#. TRANS The wrong type of device was given to a function that expects a
-#. TRANS particular sort of device.
-#: stdio-common/../sysdeps/gnu/errlist.c:220
-msgid "No such device"
-msgstr ""
-
-#. TRANS A file that isn't a directory was specified when a directory is required.
-#: stdio-common/../sysdeps/gnu/errlist.c:229
-msgid "Not a directory"
-msgstr ""
-
-#. TRANS File is a directory; you cannot open a directory for writing,
-#. TRANS or create or remove hard links to it.
-#: stdio-common/../sysdeps/gnu/errlist.c:239
-msgid "Is a directory"
-msgstr ""
-
-#. TRANS Invalid argument. This is used to indicate various kinds of problems
-#. TRANS with passing the wrong argument to a library function.
-#: stdio-common/../sysdeps/gnu/errlist.c:249
-msgid "Invalid argument"
-msgstr ""
-
-#. TRANS The current process has too many files open and can't open any more.
-#. TRANS Duplicate descriptors do count toward this limit.
-#. TRANS
-#. TRANS In BSD and GNU, the number of open files is controlled by a resource
-#. TRANS limit that can usually be increased. If you get this error, you might
-#. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
-#. TRANS @pxref{Limits on Resources}.
-#: stdio-common/../sysdeps/gnu/errlist.c:264
-msgid "Too many open files"
-msgstr ""
-
-#. TRANS There are too many distinct file openings in the entire system. Note
-#. TRANS that any number of linked channels count as just one file opening; see
-#. TRANS @ref{Linked Channels}. This error never occurs in the GNU system.
-#: stdio-common/../sysdeps/gnu/errlist.c:275
-msgid "Too many open files in system"
-msgstr ""
-
-#. TRANS Inappropriate I/O control operation, such as trying to set terminal
-#. TRANS modes on an ordinary file.
-#: stdio-common/../sysdeps/gnu/errlist.c:285
-msgid "Inappropriate ioctl for device"
-msgstr ""
-
-#. TRANS An attempt to execute a file that is currently open for writing, or
-#. TRANS write to a file that is currently being executed. Often using a
-#. TRANS debugger to run a program is considered having it open for writing and
-#. TRANS will cause this error. (The name stands for ``text file busy''.) This
-#. TRANS is not an error in the GNU system; the text is copied as necessary.
-#: stdio-common/../sysdeps/gnu/errlist.c:298
-msgid "Text file busy"
-msgstr ""
-
-#. TRANS File too big; the size of a file would be larger than allowed by the system.
-#: stdio-common/../sysdeps/gnu/errlist.c:307
-msgid "File too large"
-msgstr ""
-
-#. TRANS No space left on device; write operation on a file failed because the
-#. TRANS disk is full.
-#: stdio-common/../sysdeps/gnu/errlist.c:317
-msgid "No space left on device"
-msgstr ""
-
-#. TRANS Invalid seek operation (such as on a pipe).
-#: stdio-common/../sysdeps/gnu/errlist.c:326
-msgid "Illegal seek"
-msgstr ""
-
-#. TRANS An attempt was made to modify something on a read-only file system.
-#: stdio-common/../sysdeps/gnu/errlist.c:335
-msgid "Read-only file system"
-msgstr ""
-
-#. TRANS Too many links; the link count of a single file would become too large.
-#. TRANS @code{rename} can cause this error if the file being renamed already has
-#. TRANS as many links as it can take (@pxref{Renaming Files}).
-#: stdio-common/../sysdeps/gnu/errlist.c:346
-msgid "Too many links"
-msgstr ""
-
-#. TRANS Domain error; used by mathematical functions when an argument value does
-#. TRANS not fall into the domain over which the function is defined.
-#: stdio-common/../sysdeps/gnu/errlist.c:369
-msgid "Numerical argument out of domain"
-msgstr ""
-
-#. TRANS Range error; used by mathematical functions when the result value is
-#. TRANS not representable because of overflow or underflow.
-#: stdio-common/../sysdeps/gnu/errlist.c:379
-msgid "Numerical result out of range"
-msgstr ""
-
-#. TRANS Resource temporarily unavailable; the call might work if you try again
-#. TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN};
-#. TRANS they are always the same in the GNU C library.
-#. TRANS
-#. TRANS This error can happen in a few different situations:
-#. TRANS
-#. TRANS @itemize @bullet
-#. TRANS @item
-#. TRANS An operation that would block was attempted on an object that has
-#. TRANS non-blocking mode selected. Trying the same operation again will block
-#. TRANS until some external condition makes it possible to read, write, or
-#. TRANS connect (whatever the operation). You can use @code{select} to find out
-#. TRANS when the operation will be possible; @pxref{Waiting for I/O}.
-#. TRANS
-#. TRANS @strong{Portability Note:} In many older Unix systems, this condition
-#. TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code
-#. TRANS different from @code{EAGAIN}. To make your program portable, you should
-#. TRANS check for both codes and treat them the same.
-#. TRANS
-#. TRANS @item
-#. TRANS A temporary resource shortage made an operation impossible. @code{fork}
-#. TRANS can return this error. It indicates that the shortage is expected to
-#. TRANS pass, so your program can try the call again later and it may succeed.
-#. TRANS It is probably a good idea to delay for a few seconds before trying it
-#. TRANS again, to allow time for other processes to release scarce resources.
-#. TRANS Such shortages are usually fairly serious and affect the whole system,
-#. TRANS so usually an interactive program should report the error to the user
-#. TRANS and return to its command loop.
-#. TRANS @end itemize
-#: stdio-common/../sysdeps/gnu/errlist.c:416
-msgid "Resource temporarily unavailable"
-msgstr ""
-
-#. TRANS In the GNU C library, this is another name for @code{EAGAIN} (above).
-#. TRANS The values are always the same, on every operating system.
-#. TRANS
-#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
-#. TRANS separate error code.
-#: stdio-common/../sysdeps/gnu/errlist.c:429
-msgid "Operation would block"
-msgstr ""
-
-#. TRANS An operation that cannot complete immediately was initiated on an object
-#. TRANS that has non-blocking mode selected. Some functions that must always
-#. TRANS block (such as @code{connect}; @pxref{Connecting}) never return
-#. TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that
-#. TRANS the operation has begun and will take some time. Attempts to manipulate
-#. TRANS the object before the call completes return @code{EALREADY}. You can
-#. TRANS use the @code{select} function to find out when the pending operation
-#. TRANS has completed; @pxref{Waiting for I/O}.
-#: stdio-common/../sysdeps/gnu/errlist.c:445
-msgid "Operation now in progress"
-msgstr ""
-
-#. TRANS An operation is already in progress on an object that has non-blocking
-#. TRANS mode selected.
-#: stdio-common/../sysdeps/gnu/errlist.c:455
-msgid "Operation already in progress"
-msgstr ""
-
-#. TRANS A file that isn't a socket was specified when a socket is required.
-#: stdio-common/../sysdeps/gnu/errlist.c:464
-msgid "Socket operation on non-socket"
-msgstr ""
-
-#. TRANS The size of a message sent on a socket was larger than the supported
-#. TRANS maximum size.
-#: stdio-common/../sysdeps/gnu/errlist.c:474
-msgid "Message too long"
-msgstr ""
-
-#. TRANS The socket type does not support the requested communications protocol.
-#: stdio-common/../sysdeps/gnu/errlist.c:483
-msgid "Protocol wrong type for socket"
-msgstr ""
-
-#. TRANS You specified a socket option that doesn't make sense for the
-#. TRANS particular protocol being used by the socket. @xref{Socket Options}.
-#: stdio-common/../sysdeps/gnu/errlist.c:493
-msgid "Protocol not available"
-msgstr ""
-
-#. TRANS The socket domain does not support the requested communications protocol
-#. TRANS (perhaps because the requested protocol is completely invalid).
-#. TRANS @xref{Creating a Socket}.
-#: stdio-common/../sysdeps/gnu/errlist.c:504
-msgid "Protocol not supported"
-msgstr ""
-
-#. TRANS The socket type is not supported.
-#: stdio-common/../sysdeps/gnu/errlist.c:513
-msgid "Socket type not supported"
-msgstr ""
-
-#. TRANS The operation you requested is not supported. Some socket functions
-#. TRANS don't make sense for all types of sockets, and others may not be
-#. TRANS implemented for all communications protocols. In the GNU system, this
-#. TRANS error can happen for many calls when the object does not support the
-#. TRANS particular operation; it is a generic indication that the server knows
-#. TRANS nothing to do for that call.
-#: stdio-common/../sysdeps/gnu/errlist.c:527
-msgid "Operation not supported"
-msgstr ""
-
-#. TRANS The socket communications protocol family you requested is not supported.
-#: stdio-common/../sysdeps/gnu/errlist.c:536
-msgid "Protocol family not supported"
-msgstr ""
-
-#. TRANS The address family specified for a socket is not supported; it is
-#. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}.
-#: stdio-common/../sysdeps/gnu/errlist.c:546
-msgid "Address family not supported by protocol"
-msgstr ""
-
-#. TRANS The requested socket address is already in use. @xref{Socket Addresses}.
-#: stdio-common/../sysdeps/gnu/errlist.c:555
-msgid "Address already in use"
-msgstr ""
-
-#. TRANS The requested socket address is not available; for example, you tried
-#. TRANS to give a socket a name that doesn't match the local host name.
-#. TRANS @xref{Socket Addresses}.
-#: stdio-common/../sysdeps/gnu/errlist.c:566
-msgid "Cannot assign requested address"
-msgstr ""
-
-#. TRANS A socket operation failed because the network was down.
-#: stdio-common/../sysdeps/gnu/errlist.c:575
-msgid "Network is down"
-msgstr ""
-
-#. TRANS A socket operation failed because the subnet containing the remote host
-#. TRANS was unreachable.
-#: stdio-common/../sysdeps/gnu/errlist.c:585
-msgid "Network is unreachable"
-msgstr ""
-
-#. TRANS A network connection was reset because the remote host crashed.
-#: stdio-common/../sysdeps/gnu/errlist.c:594
-msgid "Network dropped connection on reset"
-msgstr ""
-
-#. TRANS A network connection was aborted locally.
-#: stdio-common/../sysdeps/gnu/errlist.c:603
-msgid "Software caused connection abort"
-msgstr ""
-
-#. TRANS A network connection was closed for reasons outside the control of the
-#. TRANS local host, such as by the remote machine rebooting or an unrecoverable
-#. TRANS protocol violation.
-#: stdio-common/../sysdeps/gnu/errlist.c:614
-msgid "Connection reset by peer"
-msgstr ""
-
-#. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this
-#. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
-#. TRANS other from network operations.
-#: stdio-common/../sysdeps/gnu/errlist.c:625
-msgid "No buffer space available"
-msgstr ""
-
-#. TRANS You tried to connect a socket that is already connected.
-#. TRANS @xref{Connecting}.
-#: stdio-common/../sysdeps/gnu/errlist.c:635
-msgid "Transport endpoint is already connected"
-msgstr ""
-
-#. TRANS The socket is not connected to anything. You get this error when you
-#. TRANS try to transmit data over a socket, without first specifying a
-#. TRANS destination for the data. For a connectionless socket (for datagram
-#. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead.
-#: stdio-common/../sysdeps/gnu/errlist.c:647
-msgid "Transport endpoint is not connected"
-msgstr ""
-
-#. TRANS No default destination address was set for the socket. You get this
-#. TRANS error when you try to transmit data over a connectionless socket,
-#. TRANS without first specifying a destination for the data with @code{connect}.
-#: stdio-common/../sysdeps/gnu/errlist.c:658
-msgid "Destination address required"
-msgstr ""
-
-#. TRANS The socket has already been shut down.
-#: stdio-common/../sysdeps/gnu/errlist.c:667
-msgid "Cannot send after transport endpoint shutdown"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:676
-msgid "Too many references: cannot splice"
-msgstr ""
-
-#. TRANS A socket operation with a specified timeout received no response during
-#. TRANS the timeout period.
-#: stdio-common/../sysdeps/gnu/errlist.c:686
-msgid "Connection timed out"
-msgstr ""
-
-#. TRANS A remote host refused to allow the network connection (typically because
-#. TRANS it is not running the requested service).
-#: stdio-common/../sysdeps/gnu/errlist.c:696
-msgid "Connection refused"
-msgstr ""
-
-#. TRANS Too many levels of symbolic links were encountered in looking up a file name.
-#. TRANS This often indicates a cycle of symbolic links.
-#: stdio-common/../sysdeps/gnu/errlist.c:706
-msgid "Too many levels of symbolic links"
-msgstr ""
-
-#. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
-#. TRANS Files}) or host name too long (in @code{gethostname} or
-#. TRANS @code{sethostname}; @pxref{Host Identification}).
-#: stdio-common/../sysdeps/gnu/errlist.c:717
-msgid "File name too long"
-msgstr ""
-
-#. TRANS The remote host for a requested network connection is down.
-#: stdio-common/../sysdeps/gnu/errlist.c:726
-msgid "Host is down"
-msgstr ""
-
-#. TRANS The remote host for a requested network connection is not reachable.
-#: stdio-common/../sysdeps/gnu/errlist.c:735
-msgid "No route to host"
-msgstr ""
-
-#. TRANS Directory not empty, where an empty directory was expected. Typically,
-#. TRANS this error occurs when you are trying to delete a directory.
-#: stdio-common/../sysdeps/gnu/errlist.c:745
-msgid "Directory not empty"
-msgstr ""
-
-#. TRANS This means that the per-user limit on new process would be exceeded by
-#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on
-#. TRANS the @code{RLIMIT_NPROC} limit.
-#: stdio-common/../sysdeps/gnu/errlist.c:756
-msgid "Too many processes"
-msgstr ""
-
-#. TRANS The file quota system is confused because there are too many users.
-#. TRANS @c This can probably happen in a GNU system when using NFS.
-#: stdio-common/../sysdeps/gnu/errlist.c:766
-msgid "Too many users"
-msgstr ""
-
-#. TRANS The user's disk quota was exceeded.
-#: stdio-common/../sysdeps/gnu/errlist.c:775
-msgid "Disk quota exceeded"
-msgstr ""
-
-#. TRANS Stale NFS file handle. This indicates an internal confusion in the NFS
-#. TRANS system which is due to file system rearrangements on the server host.
-#. TRANS Repairing this condition usually requires unmounting and remounting
-#. TRANS the NFS file system on the local host.
-#: stdio-common/../sysdeps/gnu/errlist.c:787
-msgid "Stale NFS file handle"
-msgstr ""
-
-#. TRANS An attempt was made to NFS-mount a remote file system with a file name that
-#. TRANS already specifies an NFS-mounted file.
-#. TRANS (This is an error on some operating systems, but we expect it to work
-#. TRANS properly on the GNU system, making this error code impossible.)
-#: stdio-common/../sysdeps/gnu/errlist.c:799
-msgid "Object is remote"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:808
-msgid "RPC struct is bad"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:817
-msgid "RPC version wrong"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:826
-msgid "RPC program not available"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:835
-msgid "RPC program version wrong"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:844
-msgid "RPC bad procedure for program"
-msgstr ""
-
-#. TRANS No locks available. This is used by the file locking facilities; see
-#. TRANS @ref{File Locks}. This error is never generated by the GNU system, but
-#. TRANS it can result from an operation to an NFS server running another
-#. TRANS operating system.
-#: stdio-common/../sysdeps/gnu/errlist.c:856
-msgid "No locks available"
-msgstr ""
-
-#. TRANS Inappropriate file type or format. The file was the wrong type for the
-#. TRANS operation, or a data file had the wrong format.
-#. TRANS
-#. TRANS On some systems @code{chmod} returns this error if you try to set the
-#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}.
-#: stdio-common/../sysdeps/gnu/errlist.c:869
-msgid "Inappropriate file type or format"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:878
-msgid "Authentication error"
-msgstr ""
-
-#. TRANS ???
-#: stdio-common/../sysdeps/gnu/errlist.c:887
-msgid "Need authenticator"
-msgstr ""
-
-#. TRANS Function not implemented. This indicates that the function called is
-#. TRANS not implemented at all, either in the C library itself or in the
-#. TRANS operating system. When you get this error, you can be sure that this
-#. TRANS particular function will always fail with @code{ENOSYS} unless you
-#. TRANS install a new version of the C library or the operating system.
-#: stdio-common/../sysdeps/gnu/errlist.c:900
-msgid "Function not implemented"
-msgstr ""
-
-#. TRANS Not supported. A function returns this error when certain parameter
-#. TRANS values are valid, but the functionality they request is not available.
-#. TRANS This can mean that the function does not implement a particular command
-#. TRANS or option value or flag bit at all. For functions that operate on some
-#. TRANS object given in a parameter, such as a file descriptor or a port, it
-#. TRANS might instead mean that only @emph{that specific object} (file
-#. TRANS descriptor, port, etc.) is unable to support the other parameters given;
-#. TRANS different file descriptors might support different ranges of parameter
-#. TRANS values.
-#. TRANS
-#. TRANS If the entire function is not available at all in the implementation,
-#. TRANS it returns @code{ENOSYS} instead.
-#: stdio-common/../sysdeps/gnu/errlist.c:920
-msgid "Not supported"
-msgstr ""
-
-#. TRANS While decoding a multibyte character the function came along an invalid
-#. TRANS or an incomplete sequence of bytes or the given wide character is invalid.
-#: stdio-common/../sysdeps/gnu/errlist.c:930
-msgid "Invalid or incomplete multibyte or wide character"
-msgstr ""
-
-#. TRANS In the GNU system, servers supporting the @code{term} protocol return
-#. TRANS this error for certain operations when the caller is not in the
-#. TRANS foreground process group of the terminal. Users do not usually see this
-#. TRANS error because functions such as @code{read} and @code{write} translate
-#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control},
-#. TRANS for information on process groups and these signals.
-#: stdio-common/../sysdeps/gnu/errlist.c:944
-msgid "Inappropriate operation for background process"
-msgstr ""
-
-#. TRANS In the GNU system, opening a file returns this error when the file is
-#. TRANS translated by a program and the translator program dies while starting
-#. TRANS up, before it has connected to the file.
-#: stdio-common/../sysdeps/gnu/errlist.c:955
-msgid "Translator died"
-msgstr ""
-
-#. TRANS The experienced user will know what is wrong.
-#. TRANS @c This error code is a joke. Its perror text is part of the joke.
-#. TRANS @c Don't change it.
-#: stdio-common/../sysdeps/gnu/errlist.c:966
-msgid "?"
-msgstr ""
-
-#. TRANS You did @strong{what}?
-#: stdio-common/../sysdeps/gnu/errlist.c:975
-msgid "You really blew it this time"
-msgstr ""
-
-#. TRANS Go home and have a glass of warm, dairy-fresh milk.
-#: stdio-common/../sysdeps/gnu/errlist.c:984
-msgid "Computer bought the farm"
-msgstr ""
-
-#. TRANS This error code has no purpose.
-#: stdio-common/../sysdeps/gnu/errlist.c:993
-msgid "Gratuitous error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1001
-msgid "Bad message"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1009
-msgid "Identifier removed"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1017
-msgid "Multihop attempted"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1025
-msgid "No data available"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1033
-msgid "Link has been severed"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1041
-msgid "No message of desired type"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1049
-msgid "Out of streams resources"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1057
-msgid "Device not a stream"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1065
-msgid "Value too large for defined data type"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1073
-msgid "Protocol error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1081
-msgid "Timer expired"
-msgstr ""
-
-#. TRANS Operation canceled; an asynchronous operation was canceled before it
-#. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel},
-#. TRANS the normal result is for the operations affected to complete with this
-#. TRANS error; @pxref{Cancel AIO Operations}.
-#: stdio-common/../sysdeps/gnu/errlist.c:1093
-msgid "Operation canceled"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1101
-msgid "Interrupted system call should be restarted"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1109
-msgid "Channel number out of range"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1117
-msgid "Level 2 not synchronized"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1125
-msgid "Level 3 halted"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1133
-msgid "Level 3 reset"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1141
-msgid "Link number out of range"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1149
-msgid "Protocol driver not attached"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1157
-msgid "No CSI structure available"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1165
-msgid "Level 2 halted"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1173
-msgid "Invalid exchange"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1181
-msgid "Invalid request descriptor"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1189
-msgid "Exchange full"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1197
-msgid "No anode"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1205
-msgid "Invalid request code"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1213
-msgid "Invalid slot"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1221
-msgid "File locking deadlock error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1229
-msgid "Bad font file format"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1237
-msgid "Machine is not on the network"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1245
-msgid "Package not installed"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1253
-msgid "Advertise error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1261
-msgid "Srmount error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1269
-msgid "Communication error on send"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1277
-msgid "RFS specific error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1285
-msgid "Name not unique on network"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1293
-msgid "File descriptor in bad state"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1301
-msgid "Remote address changed"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1309
-msgid "Can not access a needed shared library"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1317
-msgid "Accessing a corrupted shared library"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1325
-msgid ".lib section in a.out corrupted"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1333
-msgid "Attempting to link in too many shared libraries"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1341
-msgid "Cannot exec a shared library directly"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1349
-msgid "Streams pipe error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1357
-msgid "Structure needs cleaning"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1365
-msgid "Not a XENIX named type file"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1373
-msgid "No XENIX semaphores available"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1381
-msgid "Is a named type file"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1389
-msgid "Remote I/O error"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1397
-msgid "No medium found"
-msgstr ""
-
-#: stdio-common/../sysdeps/gnu/errlist.c:1405
-msgid "Wrong medium type"
-msgstr ""
-
-#: stdio-common/../sysdeps/unix/siglist.c:26
-msgid "Signal 0"
-msgstr ""
-
-#: stdio-common/../sysdeps/unix/siglist.c:32
-msgid "IOT trap"
-msgstr ""
-
-#: stdio-common/psignal.c:60
-#, c-format
-msgid "%s%sUnknown signal %d\n"
-msgstr ""
-
-#: stdio-common/psignal.c:63 stdio-common/psignal.c:65
-msgid "Unknown signal"
-msgstr ""
-
-#: dlfcn/dlinfo.c:63
-msgid "RTLD_SELF used in code not dynamically loaded"
-msgstr ""
-
-#: dlfcn/dlinfo.c:72
-msgid "unsupported dlinfo request"
-msgstr ""
-
-#: dlfcn/dlmopen.c:63
-msgid "invalid namespace"
-msgstr ""
-
-#: dlfcn/dlopen.c:64
-msgid "invalid mode parameter"
-msgstr ""
-
-#: malloc/mcheck.c:324
-msgid "memory is consistent, library is buggy\n"
-msgstr ""
-
-#: malloc/mcheck.c:327
-msgid "memory clobbered before allocated block\n"
-msgstr ""
-
-#: malloc/mcheck.c:330
-msgid "memory clobbered past end of allocated block\n"
-msgstr ""
-
-#: malloc/mcheck.c:333
-msgid "block freed twice\n"
-msgstr ""
-
-#: malloc/mcheck.c:336
-msgid "bogus mcheck_status, library is buggy\n"
-msgstr ""
-
-#: malloc/memusagestat.c:55
-msgid "Name output file"
-msgstr ""
-
-#: malloc/memusagestat.c:56
-msgid "Title string used in output graphic"
-msgstr ""
-
-#: malloc/memusagestat.c:57
-msgid ""
-"Generate output linear to time (default is linear to number of function "
-"calls)"
-msgstr ""
-
-#: malloc/memusagestat.c:59
-msgid "Also draw graph for total memory consumption"
-msgstr ""
-
-#: malloc/memusagestat.c:60
-msgid "make output graphic VALUE pixel wide"
-msgstr ""
-
-#: malloc/memusagestat.c:61
-msgid "make output graphic VALUE pixel high"
-msgstr ""
-
-#: malloc/memusagestat.c:66
-msgid "Generate graphic from memory profiling data"
-msgstr ""
-
-#: malloc/memusagestat.c:69
-msgid "DATAFILE [OUTFILE]"
-msgstr ""
-
-#: string/strerror.c:43 posix/../sysdeps/posix/gai_strerror.c:58
-msgid "Unknown error"
-msgstr ""
-
-#: string/strsignal.c:69
-#, c-format
-msgid "Real-time signal %d"
-msgstr ""
-
-#: string/strsignal.c:73
-#, c-format
-msgid "Unknown signal %d"
-msgstr ""
-
-#: timezone/zdump.c:240
-#, c-format
-msgid ""
-"%s: usage is %s [ --version ] [ -v ] [ -c [loyear,]hiyear ] zonename ...\n"
-msgstr ""
-
-#: timezone/zdump.c:257
-#, c-format
-msgid "%s: wild -c argument %s\n"
-msgstr ""
-
-#: timezone/zdump.c:347
-msgid "Error writing standard output"
-msgstr ""
-
-#: timezone/zdump.c:370
-#, c-format
-msgid ""
-"%s: use of -v on system with floating time_t other than float or double\n"
-msgstr ""
-
-#: timezone/zic.c:367
-#, c-format
-msgid "%s: Memory exhausted: %s\n"
-msgstr ""
-
-#: timezone/zic.c:392 misc/error.c:129 misc/error.c:157
-msgid "Unknown system error"
-msgstr ""
-
-#: timezone/zic.c:426
-#, c-format
-msgid "\"%s\", line %d: %s"
-msgstr ""
-
-#: timezone/zic.c:429
-#, c-format
-msgid " (rule from \"%s\", line %d)"
-msgstr ""
-
-#: timezone/zic.c:441
-msgid "warning: "
-msgstr ""
-
-#: timezone/zic.c:451
-#, c-format
-msgid ""
-"%s: usage is %s [ --version ] [ -s ] [ -v ] [ -l localtime ] [ -p "
-"posixrules ] \\\n"
-"\t[ -d directory ] [ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n"
-msgstr ""
-
-#: timezone/zic.c:500
-#, c-format
-msgid "%s: More than one -d option specified\n"
-msgstr ""
-
-#: timezone/zic.c:510
-#, c-format
-msgid "%s: More than one -l option specified\n"
-msgstr ""
-
-#: timezone/zic.c:520
-#, c-format
-msgid "%s: More than one -p option specified\n"
-msgstr ""
-
-#: timezone/zic.c:530
-#, c-format
-msgid "%s: More than one -y option specified\n"
-msgstr ""
-
-#: timezone/zic.c:540
-#, c-format
-msgid "%s: More than one -L option specified\n"
-msgstr ""
-
-#: timezone/zic.c:589
-msgid "link to link"
-msgstr ""
-
-#: timezone/zic.c:654
-msgid "hard link failed, symbolic link used"
-msgstr ""
-
-#: timezone/zic.c:662
-#, c-format
-msgid "%s: Can't link from %s to %s: %s\n"
-msgstr ""
-
-#: timezone/zic.c:771 timezone/zic.c:773
-msgid "same rule name in multiple files"
-msgstr ""
-
-#: timezone/zic.c:814
-msgid "unruly zone"
-msgstr ""
-
-#: timezone/zic.c:821
-#, c-format
-msgid "%s in ruleless zone"
-msgstr ""
-
-#: timezone/zic.c:842
-msgid "standard input"
-msgstr ""
-
-#: timezone/zic.c:847
-#, c-format
-msgid "%s: Can't open %s: %s\n"
-msgstr ""
-
-#: timezone/zic.c:858
-msgid "line too long"
-msgstr ""
-
-#: timezone/zic.c:878
-msgid "input line of unknown type"
-msgstr ""
-
-#: timezone/zic.c:894
-#, c-format
-msgid "%s: Leap line in non leap seconds file %s\n"
-msgstr ""
-
-#: timezone/zic.c:901 timezone/zic.c:1322 timezone/zic.c:1347
-#, c-format
-msgid "%s: panic: Invalid l_value %d\n"
-msgstr ""
-
-#: timezone/zic.c:909
-#, c-format
-msgid "%s: Error reading %s\n"
-msgstr ""
-
-#: timezone/zic.c:916
-#, c-format
-msgid "%s: Error closing %s: %s\n"
-msgstr ""
-
-#: timezone/zic.c:921
-msgid "expected continuation line not found"
-msgstr ""
-
-#: timezone/zic.c:965
-msgid "24:00 not handled by pre-1998 versions of zic"
-msgstr ""
-
-#: timezone/zic.c:979
-msgid "wrong number of fields on Rule line"
-msgstr ""
-
-#: timezone/zic.c:983
-msgid "nameless rule"
-msgstr ""
-
-#: timezone/zic.c:988
-msgid "invalid saved time"
-msgstr ""
-
-#: timezone/zic.c:1007
-msgid "wrong number of fields on Zone line"
-msgstr ""
-
-#: timezone/zic.c:1013
-#, c-format
-msgid "\"Zone %s\" line and -l option are mutually exclusive"
-msgstr ""
-
-#: timezone/zic.c:1021
-#, c-format
-msgid "\"Zone %s\" line and -p option are mutually exclusive"
-msgstr ""
-
-#: timezone/zic.c:1033
-#, c-format
-msgid "duplicate zone name %s (file \"%s\", line %d)"
-msgstr ""
-
-#: timezone/zic.c:1049
-msgid "wrong number of fields on Zone continuation line"
-msgstr ""
-
-#: timezone/zic.c:1089
-msgid "invalid UTC offset"
-msgstr ""
-
-#: timezone/zic.c:1092
-msgid "invalid abbreviation format"
-msgstr ""
-
-#: timezone/zic.c:1119
-msgid "Zone continuation line end time is not after end time of previous line"
-msgstr ""
-
-#: timezone/zic.c:1147
-msgid "wrong number of fields on Leap line"
-msgstr ""
-
-#: timezone/zic.c:1156
-msgid "invalid leaping year"
-msgstr ""
-
-#: timezone/zic.c:1171 timezone/zic.c:1277
-msgid "invalid month name"
-msgstr ""
-
-#: timezone/zic.c:1184 timezone/zic.c:1399 timezone/zic.c:1413
-msgid "invalid day of month"
-msgstr ""
-
-#: timezone/zic.c:1189
-msgid "time before zero"
-msgstr ""
-
-#: timezone/zic.c:1193
-msgid "time too small"
-msgstr ""
-
-#: timezone/zic.c:1197
-msgid "time too large"
-msgstr ""
-
-#: timezone/zic.c:1201 timezone/zic.c:1306
-msgid "invalid time of day"
-msgstr ""
-
-#: timezone/zic.c:1220
-msgid "illegal CORRECTION field on Leap line"
-msgstr ""
-
-#: timezone/zic.c:1225
-msgid "illegal Rolling/Stationary field on Leap line"
-msgstr ""
-
-#: timezone/zic.c:1241
-msgid "wrong number of fields on Link line"
-msgstr ""
-
-#: timezone/zic.c:1245
-msgid "blank FROM field on Link line"
-msgstr ""
-
-#: timezone/zic.c:1249
-msgid "blank TO field on Link line"
-msgstr ""
-
-#: timezone/zic.c:1326
-msgid "invalid starting year"
-msgstr ""
-
-#: timezone/zic.c:1330
-msgid "starting year too low to be represented"
-msgstr ""
-
-#: timezone/zic.c:1332
-msgid "starting year too high to be represented"
-msgstr ""
-
-#: timezone/zic.c:1351
-msgid "invalid ending year"
-msgstr ""
-
-#: timezone/zic.c:1355
-msgid "ending year too low to be represented"
-msgstr ""
-
-#: timezone/zic.c:1357
-msgid "ending year too high to be represented"
-msgstr ""
-
-#: timezone/zic.c:1360
-msgid "starting year greater than ending year"
-msgstr ""
-
-#: timezone/zic.c:1367
-msgid "typed single year"
-msgstr ""
-
-#: timezone/zic.c:1404
-msgid "invalid weekday name"
-msgstr ""
-
-#: timezone/zic.c:1518
-#, c-format
-msgid "%s: Can't remove %s: %s\n"
-msgstr ""
-
-#: timezone/zic.c:1528
-#, c-format
-msgid "%s: Can't create %s: %s\n"
-msgstr ""
-
-#: timezone/zic.c:1595
-#, c-format
-msgid "%s: Error writing %s\n"
-msgstr ""
-
-#: timezone/zic.c:1786
-msgid "can't determine time zone abbreviation to use just after until time"
-msgstr ""
-
-#: timezone/zic.c:1829
-msgid "too many transitions?!"
-msgstr ""
-
-#: timezone/zic.c:1848
-msgid "internal error - addtype called with bad isdst"
-msgstr ""
-
-#: timezone/zic.c:1852
-msgid "internal error - addtype called with bad ttisstd"
-msgstr ""
-
-#: timezone/zic.c:1856
-msgid "internal error - addtype called with bad ttisgmt"
-msgstr ""
-
-#: timezone/zic.c:1875
-msgid "too many local time types"
-msgstr ""
-
-#: timezone/zic.c:1903
-msgid "too many leap seconds"
-msgstr ""
-
-#: timezone/zic.c:1909
-msgid "repeated leap second moment"
-msgstr ""
-
-#: timezone/zic.c:1961
-msgid "Wild result from command execution"
-msgstr ""
-
-#: timezone/zic.c:1962
-#, c-format
-msgid "%s: command was '%s', result was %d\n"
-msgstr ""
-
-#: timezone/zic.c:2058
-msgid "Odd number of quotation marks"
-msgstr ""
-
-#: timezone/zic.c:2079 timezone/zic.c:2098
-msgid "time overflow"
-msgstr ""
-
-#: timezone/zic.c:2145
-msgid "use of 2/29 in non leap-year"
-msgstr ""
-
-#: timezone/zic.c:2180
-msgid ""
-"rule goes past start/end of month--will not work with pre-2004 versions of "
-"zic"
-msgstr ""
-
-#: timezone/zic.c:2202
-msgid "too many, or too long, time zone abbreviations"
-msgstr ""
-
-#: timezone/zic.c:2243
-#, c-format
-msgid "%s: Can't create directory %s: %s\n"
-msgstr ""
-
-#: timezone/zic.c:2265
-#, c-format
-msgid "%s: %d did not sign extend correctly\n"
-msgstr ""
-
-#: posix/../sysdeps/generic/wordexp.c:1799
-msgid "parameter null or not set"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:31
-msgid "Address family for hostname not supported"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:32
-msgid "Temporary failure in name resolution"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:33
-msgid "Bad value for ai_flags"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:34
-msgid "Non-recoverable failure in name resolution"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:35
-msgid "ai_family not supported"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:36
-msgid "Memory allocation failure"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:37
-msgid "No address associated with hostname"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:38
-msgid "Name or service not known"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:39
-msgid "Servname not supported for ai_socktype"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:40
-msgid "ai_socktype not supported"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:41
-msgid "System error"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:42
-msgid "Processing request in progress"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:43
-msgid "Request canceled"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:44
-msgid "Request not canceled"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:45
-msgid "All requests done"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:46
-msgid "Interrupted by a signal"
-msgstr ""
-
-#: posix/../sysdeps/posix/gai_strerror.c:47
-msgid "Parameter string not correctly encoded"
-msgstr ""
-
-#: posix/getconf.c:942
-#, c-format
-msgid "Usage: %s [-v specification] variable_name [pathname]\n"
-msgstr ""
-
-#: posix/getconf.c:1018
-#, c-format
-msgid "unknown specification \"%s\""
-msgstr ""
-
-#: posix/getconf.c:1046
-#, c-format
-msgid "Couldn't execute %s"
-msgstr ""
-
-#: posix/getconf.c:1076 posix/getconf.c:1092
-msgid "undefined"
-msgstr ""
-
-#: posix/getconf.c:1114
-#, c-format
-msgid "Unrecognized variable `%s'"
-msgstr ""
-
-#: posix/getopt.c:571 posix/getopt.c:590
-#, c-format
-msgid "%s: option `%s' is ambiguous\n"
-msgstr ""
-
-#: posix/getopt.c:623 posix/getopt.c:627
-#, c-format
-msgid "%s: option `--%s' doesn't allow an argument\n"
-msgstr ""
-
-#: posix/getopt.c:636 posix/getopt.c:641
-#, c-format
-msgid "%s: option `%c%s' doesn't allow an argument\n"
-msgstr ""
-
-#: posix/getopt.c:687 posix/getopt.c:709 posix/getopt.c:1040
-#: posix/getopt.c:1062
-#, c-format
-msgid "%s: option `%s' requires an argument\n"
-msgstr ""
-
-#: posix/getopt.c:747 posix/getopt.c:750
-#, c-format
-msgid "%s: unrecognized option `--%s'\n"
-msgstr ""
-
-#: posix/getopt.c:758 posix/getopt.c:761
-#, c-format
-msgid "%s: unrecognized option `%c%s'\n"
-msgstr ""
-
-#: posix/getopt.c:816 posix/getopt.c:819
-#, c-format
-msgid "%s: illegal option -- %c\n"
-msgstr ""
-
-#: posix/getopt.c:825 posix/getopt.c:828
-#, c-format
-msgid "%s: invalid option -- %c\n"
-msgstr ""
-
-#: posix/getopt.c:883 posix/getopt.c:902 posix/getopt.c:1115
-#: posix/getopt.c:1136
-#, c-format
-msgid "%s: option requires an argument -- %c\n"
-msgstr ""
-
-#: posix/getopt.c:955 posix/getopt.c:974
-#, c-format
-msgid "%s: option `-W %s' is ambiguous\n"
-msgstr ""
-
-#: posix/getopt.c:998 posix/getopt.c:1019
-#, c-format
-msgid "%s: option `-W %s' doesn't allow an argument\n"
-msgstr ""
-
-#: posix/regcomp.c:163
-msgid "No match"
-msgstr ""
-
-#: posix/regcomp.c:166
-msgid "Invalid regular expression"
-msgstr ""
-
-#: posix/regcomp.c:169
-msgid "Invalid collation character"
-msgstr ""
-
-#: posix/regcomp.c:172
-msgid "Invalid character class name"
-msgstr ""
-
-#: posix/regcomp.c:175
-msgid "Trailing backslash"
-msgstr ""
-
-#: posix/regcomp.c:178
-msgid "Invalid back reference"
-msgstr ""
-
-#: posix/regcomp.c:181
-msgid "Unmatched [ or [^"
-msgstr ""
-
-#: posix/regcomp.c:184
-msgid "Unmatched ( or \\("
-msgstr ""
-
-#: posix/regcomp.c:187
-msgid "Unmatched \\{"
-msgstr ""
-
-#: posix/regcomp.c:190
-msgid "Invalid content of \\{\\}"
-msgstr ""
-
-#: posix/regcomp.c:193
-msgid "Invalid range end"
-msgstr ""
-
-#: posix/regcomp.c:196
-msgid "Memory exhausted"
-msgstr ""
-
-#: posix/regcomp.c:199
-msgid "Invalid preceding regular expression"
-msgstr ""
-
-#: posix/regcomp.c:202
-msgid "Premature end of regular expression"
-msgstr ""
-
-#: posix/regcomp.c:205
-msgid "Regular expression too big"
-msgstr ""
-
-#: posix/regcomp.c:208
-msgid "Unmatched ) or \\)"
-msgstr ""
-
-#: posix/regcomp.c:692
-msgid "No previous regular expression"
-msgstr ""
-
-#: argp/argp-help.c:225
-#, c-format
-msgid "%.*s: ARGP_HELP_FMT parameter requires a value"
-msgstr ""
-
-#: argp/argp-help.c:234
-#, c-format
-msgid "%.*s: Unknown ARGP_HELP_FMT parameter"
-msgstr ""
-
-#: argp/argp-help.c:246
-#, c-format
-msgid "Garbage in ARGP_HELP_FMT: %s"
-msgstr ""
-
-#: argp/argp-help.c:1210
-msgid ""
-"Mandatory or optional arguments to long options are also mandatory or "
-"optional for any corresponding short options."
-msgstr ""
-
-#: argp/argp-help.c:1597
-msgid "Usage:"
-msgstr ""
-
-#: argp/argp-help.c:1601
-msgid " or: "
-msgstr ""
-
-#: argp/argp-help.c:1613
-msgid " [OPTION...]"
-msgstr ""
-
-#: argp/argp-help.c:1640
-#, c-format
-msgid "Try `%s --help' or `%s --usage' for more information.\n"
-msgstr ""
-
-#: argp/argp-help.c:1668
-#, c-format
-msgid "Report bugs to %s.\n"
-msgstr ""
-
-#: argp/argp-parse.c:102
-msgid "Give this help list"
-msgstr ""
-
-#: argp/argp-parse.c:103
-msgid "Give a short usage message"
-msgstr ""
-
-#: argp/argp-parse.c:104
-msgid "Set the program name"
-msgstr ""
-
-#: argp/argp-parse.c:106
-msgid "Hang for SECS seconds (default 3600)"
-msgstr ""
-
-#: argp/argp-parse.c:167
-msgid "Print program version"
-msgstr ""
-
-#: argp/argp-parse.c:183
-msgid "(PROGRAM ERROR) No version known!?"
-msgstr ""
-
-#: argp/argp-parse.c:623
-#, c-format
-msgid "%s: Too many arguments\n"
-msgstr ""
-
-#: argp/argp-parse.c:766
-msgid "(PROGRAM ERROR) Option should have been recognized!?"
-msgstr ""
-
-#: libidn/nfkc.c:464
-msgid "Character out of range for UTF-8"
-msgstr ""
-
-#: resolv/herror.c:68
-msgid "Resolver Error 0 (no error)"
-msgstr ""
-
-#: resolv/herror.c:69
-msgid "Unknown host"
-msgstr ""
-
-#: resolv/herror.c:70
-msgid "Host name lookup failure"
-msgstr ""
-
-#: resolv/herror.c:71
-msgid "Unknown server error"
-msgstr ""
-
-#: resolv/herror.c:72
-msgid "No address associated with name"
-msgstr ""
-
-#: resolv/herror.c:108
-msgid "Resolver internal error"
-msgstr ""
-
-#: resolv/herror.c:111
-msgid "Unknown resolver error"
-msgstr ""
-
-#: resolv/res_hconf.c:149
-#, c-format
-msgid "%s: line %d: expected service, found `%s'\n"
-msgstr ""
-
-#: resolv/res_hconf.c:167
-#, c-format
-msgid "%s: line %d: cannot specify more than %d services"
-msgstr ""
-
-#: resolv/res_hconf.c:195
-#, c-format
-msgid "%s: line %d: list delimiter not followed by keyword"
-msgstr ""
-
-#: resolv/res_hconf.c:236
-#, c-format
-msgid "%s: line %d: cannot specify more than %d trim domains"
-msgstr ""
-
-#: resolv/res_hconf.c:262
-#, c-format
-msgid "%s: line %d: list delimiter not followed by domain"
-msgstr ""
-
-#: resolv/res_hconf.c:326
-#, c-format
-msgid "%s: line %d: expected `on' or `off', found `%s'\n"
-msgstr ""
-
-#: resolv/res_hconf.c:374
-#, c-format
-msgid "%s: line %d: bad command `%s'\n"
-msgstr ""
-
-#: resolv/res_hconf.c:404
-#, c-format
-msgid "%s: line %d: ignoring trailing garbage `%s'\n"
-msgstr ""
-
-#: nss/getent.c:51
-msgid "database [key ...]"
-msgstr ""
-
-#: nss/getent.c:56
-msgid "Service configuration to be used"
-msgstr ""
-
-#: nss/getent.c:61
-msgid ""
-"Get entries from administrative database.\013For bug reporting instructions, "
-"please see:\n"
-"<http://www.gnu.org/software/libc/bugs.html>.\n"
-msgstr ""
-
-#: nss/getent.c:144 nss/getent.c:393
-#, c-format
-msgid "Enumeration not supported on %s\n"
-msgstr ""
-
-#: nss/getent.c:791
-msgid "Supported databases:"
-msgstr ""
-
-#: nss/getent.c:848 nscd/nscd.c:146 nscd/nscd_nischeck.c:64
-msgid "wrong number of arguments"
-msgstr ""
-
-#: nss/getent.c:858
-#, c-format
-msgid "Unknown database: %s\n"
-msgstr ""
-
-#: debug/pcprofiledump.c:52
-msgid "Don't buffer output"
-msgstr ""
-
-#: debug/pcprofiledump.c:57
-msgid "Dump information generated by PC profiling."
-msgstr ""
-
-#: debug/pcprofiledump.c:60
-msgid "[FILE]"
-msgstr ""
-
-#: debug/pcprofiledump.c:100
-msgid "cannot open input file"
-msgstr ""
-
-#: debug/pcprofiledump.c:106
-msgid "cannot read header"
-msgstr ""
-
-#: debug/pcprofiledump.c:170
-msgid "invalid pointer size"
-msgstr ""
-
-#: inet/rcmd.c:166 inet/rcmd.c:168
-msgid "rcmd: Cannot allocate memory\n"
-msgstr ""
-
-#: inet/rcmd.c:186 inet/rcmd.c:188
-msgid "rcmd: socket: All ports in use\n"
-msgstr ""
-
-#: inet/rcmd.c:220
-#, c-format
-msgid "connect to address %s: "
-msgstr ""
-
-#: inet/rcmd.c:236
-#, c-format
-msgid "Trying %s...\n"
-msgstr ""
-
-#: inet/rcmd.c:281
-#, c-format
-msgid "rcmd: write (setting up stderr): %m\n"
-msgstr ""
-
-#: inet/rcmd.c:300
-#, c-format
-msgid "rcmd: poll (setting up stderr): %m\n"
-msgstr ""
-
-#: inet/rcmd.c:303
-msgid "poll: protocol failure in circuit setup\n"
-msgstr ""
-
-#: inet/rcmd.c:344
-msgid "socket: protocol failure in circuit setup\n"
-msgstr ""
-
-#: inet/rcmd.c:371
-#, c-format
-msgid "rcmd: %s: short read"
-msgstr ""
-
-#: inet/rcmd.c:531
-msgid "lstat failed"
-msgstr ""
-
-#: inet/rcmd.c:533
-msgid "not regular file"
-msgstr ""
-
-#: inet/rcmd.c:538
-msgid "cannot open"
-msgstr ""
-
-#: inet/rcmd.c:540
-msgid "fstat failed"
-msgstr ""
-
-#: inet/rcmd.c:542
-msgid "bad owner"
-msgstr ""
-
-#: inet/rcmd.c:544
-msgid "writeable by other than owner"
-msgstr ""
-
-#: inet/rcmd.c:546
-msgid "hard linked somewhere"
-msgstr ""
-
-#: inet/ruserpass.c:170 inet/ruserpass.c:193
-msgid "out of memory"
-msgstr ""
-
-#: inet/ruserpass.c:184
-msgid "Error: .netrc file is readable by others."
-msgstr ""
-
-#: inet/ruserpass.c:185
-msgid "Remove password or make file unreadable by others."
-msgstr ""
-
-#: inet/ruserpass.c:277
-#, c-format
-msgid "Unknown .netrc keyword %s"
-msgstr ""
-
-#: sunrpc/auth_unix.c:117 sunrpc/auth_unix.c:120
-msgid "authunix_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/auth_unix.c:356
-msgid "auth_none.c - Fatal marshalling problem"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:118 sunrpc/clnt_perr.c:139
-#, c-format
-msgid "; low version = %lu, high version = %lu"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:125
-msgid "; why = "
-msgstr ""
-
-#: sunrpc/clnt_perr.c:132
-#, c-format
-msgid "(unknown authentication error - %d)"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:177
-msgid "RPC: Success"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:180
-msgid "RPC: Can't encode arguments"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:184
-msgid "RPC: Can't decode result"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:188
-msgid "RPC: Unable to send"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:192
-msgid "RPC: Unable to receive"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:196
-msgid "RPC: Timed out"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:200
-msgid "RPC: Incompatible versions of RPC"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:204
-msgid "RPC: Authentication error"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:208
-msgid "RPC: Program unavailable"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:212
-msgid "RPC: Program/version mismatch"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:216
-msgid "RPC: Procedure unavailable"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:220
-msgid "RPC: Server can't decode arguments"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:224
-msgid "RPC: Remote system error"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:228
-msgid "RPC: Unknown host"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:232
-msgid "RPC: Unknown protocol"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:236
-msgid "RPC: Port mapper failure"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:240
-msgid "RPC: Program not registered"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:244
-msgid "RPC: Failed (unspecified error)"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:285
-msgid "RPC: (unknown error code)"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:357
-msgid "Authentication OK"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:360
-msgid "Invalid client credential"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:364
-msgid "Server rejected credential"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:368
-msgid "Invalid client verifier"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:372
-msgid "Server rejected verifier"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:376
-msgid "Client credential too weak"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:380
-msgid "Invalid server verifier"
-msgstr ""
-
-#: sunrpc/clnt_perr.c:384
-msgid "Failed (unspecified error)"
-msgstr ""
-
-#: sunrpc/clnt_raw.c:117
-msgid "clnt_raw.c - Fatal header serialization error."
-msgstr ""
-
-#: sunrpc/clnt_tcp.c:134 sunrpc/clnt_tcp.c:137
-msgid "clnttcp_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/clnt_udp.c:142 sunrpc/clnt_udp.c:145
-msgid "clntudp_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/clnt_unix.c:131 sunrpc/clnt_unix.c:134
-msgid "clntunix_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/pm_getmaps.c:74
-msgid "pmap_getmaps rpc problem"
-msgstr ""
-
-#: sunrpc/pmap_clnt.c:129
-msgid "Cannot register service"
-msgstr ""
-
-#: sunrpc/pmap_rmt.c:248
-msgid "Cannot create socket for broadcast rpc"
-msgstr ""
-
-#: sunrpc/pmap_rmt.c:255
-msgid "Cannot set socket option SO_BROADCAST"
-msgstr ""
-
-#: sunrpc/pmap_rmt.c:307
-msgid "Cannot send broadcast packet"
-msgstr ""
-
-#: sunrpc/pmap_rmt.c:332
-msgid "Broadcast poll problem"
-msgstr ""
-
-#: sunrpc/pmap_rmt.c:345
-msgid "Cannot receive reply to broadcast"
-msgstr ""
-
-#: sunrpc/rpc_main.c:290
-#, c-format
-msgid "%s: output would overwrite %s\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:297
-#, c-format
-msgid "%s: unable to open %s: %m\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:309
-#, c-format
-msgid "%s: while writing output %s: %m"
-msgstr ""
-
-#: sunrpc/rpc_main.c:344
-#, c-format
-msgid "cannot find C preprocessor: %s \n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:352
-msgid "cannot find any C preprocessor (cpp)\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:421
-#, c-format
-msgid "%s: C preprocessor failed with signal %d\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:424
-#, c-format
-msgid "%s: C preprocessor failed with exit code %d\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:464
-#, c-format
-msgid "illegal nettype :`%s'\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1104
-#, c-format
-msgid "rpcgen: too many defines\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1116
-#, c-format
-msgid "rpcgen: arglist coding error\n"
-msgstr ""
-
-#. TRANS: the file will not be removed; this is an
-#. TRANS: informative message.
-#: sunrpc/rpc_main.c:1149
-#, c-format
-msgid "file `%s' already exists and may be overwritten\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1194
-#, c-format
-msgid "Cannot specify more than one input file!\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1364
-msgid "This implementation doesn't support newstyle or MT-safe code!\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1373
-#, c-format
-msgid "Cannot use netid flag with inetd flag!\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1385
-msgid "Cannot use netid flag without TIRPC!\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1392
-msgid "Cannot use table flags with newstyle!\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1411
-#, c-format
-msgid "\"infile\" is required for template generation flags.\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1416
-#, c-format
-msgid "Cannot have more than one file generation flag!\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1425
-#, c-format
-msgid "usage: %s infile\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1426
-#, c-format
-msgid ""
-"\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] "
-"infile\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1428
-#, c-format
-msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1430
-#, c-format
-msgid "\t%s [-s nettype]* [-o outfile] [infile]\n"
-msgstr ""
-
-#: sunrpc/rpc_main.c:1431
-#, c-format
-msgid "\t%s [-n netid]* [-o outfile] [infile]\n"
-msgstr ""
-
-#: sunrpc/rpc_scan.c:118
-msgid "constant or identifier expected"
-msgstr ""
-
-#: sunrpc/rpc_scan.c:314
-msgid "illegal character in file: "
-msgstr ""
-
-#: sunrpc/rpc_scan.c:353 sunrpc/rpc_scan.c:379
-msgid "unterminated string constant"
-msgstr ""
-
-#: sunrpc/rpc_scan.c:385
-msgid "empty char string"
-msgstr ""
-
-#: sunrpc/rpc_scan.c:527 sunrpc/rpc_scan.c:537
-msgid "preprocessor error"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:237 sunrpc/rpcinfo.c:383
-#, c-format
-msgid "program %lu is not available\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:264 sunrpc/rpcinfo.c:310 sunrpc/rpcinfo.c:333
-#: sunrpc/rpcinfo.c:407 sunrpc/rpcinfo.c:453 sunrpc/rpcinfo.c:476
-#: sunrpc/rpcinfo.c:510
-#, c-format
-msgid "program %lu version %lu is not available\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:515
-#, c-format
-msgid "program %lu version %lu ready and waiting\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:556 sunrpc/rpcinfo.c:563
-msgid "rpcinfo: can't contact portmapper"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:570
-msgid "No remote programs registered.\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:574
-msgid " program vers proto port\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:613
-msgid "(unknown)"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:637
-#, c-format
-msgid "rpcinfo: broadcast failed: %s\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:658
-msgid "Sorry. You are not root\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:665
-#, c-format
-msgid "rpcinfo: Could not delete registration for prog %s version %s\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:674
-msgid "Usage: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:676
-msgid " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:678
-msgid " rpcinfo -p [ host ]\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:679
-msgid " rpcinfo -b prognum versnum\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:680
-msgid " rpcinfo -d prognum versnum\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:695
-#, c-format
-msgid "rpcinfo: %s is unknown service\n"
-msgstr ""
-
-#: sunrpc/rpcinfo.c:732
-#, c-format
-msgid "rpcinfo: %s is unknown host\n"
-msgstr ""
-
-#: sunrpc/svc_run.c:76
-msgid "svc_run: - poll failed"
-msgstr ""
-
-#: sunrpc/svc_simple.c:87
-#, c-format
-msgid "can't reassign procedure number %ld\n"
-msgstr ""
-
-#: sunrpc/svc_simple.c:97
-msgid "couldn't create an rpc server\n"
-msgstr ""
-
-#: sunrpc/svc_simple.c:105
-#, c-format
-msgid "couldn't register prog %ld vers %ld\n"
-msgstr ""
-
-#: sunrpc/svc_simple.c:113
-msgid "registerrpc: out of memory\n"
-msgstr ""
-
-#: sunrpc/svc_simple.c:178
-#, c-format
-msgid "trouble replying to prog %d\n"
-msgstr ""
-
-#: sunrpc/svc_simple.c:187
-#, c-format
-msgid "never registered prog %d\n"
-msgstr ""
-
-#: sunrpc/svc_tcp.c:155
-msgid "svc_tcp.c - tcp socket creation problem"
-msgstr ""
-
-#: sunrpc/svc_tcp.c:170
-msgid "svc_tcp.c - cannot getsockname or listen"
-msgstr ""
-
-#: sunrpc/svc_tcp.c:181 sunrpc/svc_tcp.c:184
-msgid "svctcp_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/svc_tcp.c:225 sunrpc/svc_tcp.c:228
-msgid "svc_tcp: makefd_xprt: out of memory\n"
-msgstr ""
-
-#: sunrpc/svc_udp.c:128
-msgid "svcudp_create: socket creation problem"
-msgstr ""
-
-#: sunrpc/svc_udp.c:142
-msgid "svcudp_create - cannot getsockname"
-msgstr ""
-
-#: sunrpc/svc_udp.c:154 sunrpc/svc_udp.c:157
-msgid "svcudp_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/svc_udp.c:182 sunrpc/svc_udp.c:185
-msgid "svcudp_create: xp_pad is too small for IP_PKTINFO\n"
-msgstr ""
-
-#: sunrpc/svc_udp.c:493
-msgid "enablecache: cache already enabled"
-msgstr ""
-
-#: sunrpc/svc_udp.c:499
-msgid "enablecache: could not allocate cache"
-msgstr ""
-
-#: sunrpc/svc_udp.c:507
-msgid "enablecache: could not allocate cache data"
-msgstr ""
-
-#: sunrpc/svc_udp.c:514
-msgid "enablecache: could not allocate cache fifo"
-msgstr ""
-
-#: sunrpc/svc_udp.c:550
-msgid "cache_set: victim not found"
-msgstr ""
-
-#: sunrpc/svc_udp.c:561
-msgid "cache_set: victim alloc failed"
-msgstr ""
-
-#: sunrpc/svc_udp.c:567
-msgid "cache_set: could not allocate new rpc_buffer"
-msgstr ""
-
-#: sunrpc/svc_unix.c:150
-msgid "svc_unix.c - AF_UNIX socket creation problem"
-msgstr ""
-
-#: sunrpc/svc_unix.c:166
-msgid "svc_unix.c - cannot getsockname or listen"
-msgstr ""
-
-#: sunrpc/svc_unix.c:178 sunrpc/svc_unix.c:181
-msgid "svcunix_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/svc_unix.c:222 sunrpc/svc_unix.c:225
-msgid "svc_unix: makefd_xprt: out of memory\n"
-msgstr ""
-
-#: sunrpc/xdr.c:568 sunrpc/xdr.c:571
-msgid "xdr_bytes: out of memory\n"
-msgstr ""
-
-#: sunrpc/xdr.c:726 sunrpc/xdr.c:729
-msgid "xdr_string: out of memory\n"
-msgstr ""
-
-#: sunrpc/xdr_array.c:111 sunrpc/xdr_array.c:114
-msgid "xdr_array: out of memory\n"
-msgstr ""
-
-#: sunrpc/xdr_rec.c:158 sunrpc/xdr_rec.c:161
-msgid "xdrrec_create: out of memory\n"
-msgstr ""
-
-#: sunrpc/xdr_ref.c:88 sunrpc/xdr_ref.c:91
-msgid "xdr_reference: out of memory\n"
-msgstr ""
-
-#: nis/nis_callback.c:189
-msgid "unable to free arguments"
-msgstr ""
-
-#: nis/nis_error.c:30
-msgid "Probable success"
-msgstr ""
-
-#: nis/nis_error.c:31
-msgid "Not found"
-msgstr ""
-
-#: nis/nis_error.c:32
-msgid "Probably not found"
-msgstr ""
-
-#: nis/nis_error.c:33
-msgid "Cache expired"
-msgstr ""
-
-#: nis/nis_error.c:34
-msgid "NIS+ servers unreachable"
-msgstr ""
-
-#: nis/nis_error.c:35
-msgid "Unknown object"
-msgstr ""
-
-#: nis/nis_error.c:36
-msgid "Server busy, try again"
-msgstr ""
-
-#: nis/nis_error.c:37
-msgid "Generic system error"
-msgstr ""
-
-#: nis/nis_error.c:38
-msgid "First/next chain broken"
-msgstr ""
-
-#: nis/nis_error.c:40
-msgid "Not owner"
-msgstr ""
-
-#: nis/nis_error.c:41
-msgid "Name not served by this server"
-msgstr ""
-
-#: nis/nis_error.c:42
-msgid "Server out of memory"
-msgstr ""
-
-#: nis/nis_error.c:43
-msgid "Object with same name exists"
-msgstr ""
-
-#: nis/nis_error.c:44
-msgid "Not master server for this domain"
-msgstr ""
-
-#: nis/nis_error.c:45
-msgid "Invalid object for operation"
-msgstr ""
-
-#: nis/nis_error.c:46
-msgid "Malformed name, or illegal name"
-msgstr ""
-
-#: nis/nis_error.c:47
-msgid "Unable to create callback"
-msgstr ""
-
-#: nis/nis_error.c:48
-msgid "Results sent to callback proc"
-msgstr ""
-
-#: nis/nis_error.c:49
-msgid "Not found, no such name"
-msgstr ""
-
-#: nis/nis_error.c:50
-msgid "Name/entry isn't unique"
-msgstr ""
-
-#: nis/nis_error.c:51
-msgid "Modification failed"
-msgstr ""
-
-#: nis/nis_error.c:52
-msgid "Database for table does not exist"
-msgstr ""
-
-#: nis/nis_error.c:53
-msgid "Entry/table type mismatch"
-msgstr ""
-
-#: nis/nis_error.c:54
-msgid "Link points to illegal name"
-msgstr ""
-
-#: nis/nis_error.c:55
-msgid "Partial success"
-msgstr ""
-
-#: nis/nis_error.c:56
-msgid "Too many attributes"
-msgstr ""
-
-#: nis/nis_error.c:57
-msgid "Error in RPC subsystem"
-msgstr ""
-
-#: nis/nis_error.c:58
-msgid "Missing or malformed attribute"
-msgstr ""
-
-#: nis/nis_error.c:59
-msgid "Named object is not searchable"
-msgstr ""
-
-#: nis/nis_error.c:60
-msgid "Error while talking to callback proc"
-msgstr ""
-
-#: nis/nis_error.c:61
-msgid "Non NIS+ namespace encountered"
-msgstr ""
-
-#: nis/nis_error.c:62
-msgid "Illegal object type for operation"
-msgstr ""
-
-#: nis/nis_error.c:63
-msgid "Passed object is not the same object on server"
-msgstr ""
-
-#: nis/nis_error.c:64
-msgid "Modify operation failed"
-msgstr ""
-
-#: nis/nis_error.c:65
-msgid "Query illegal for named table"
-msgstr ""
-
-#: nis/nis_error.c:66
-msgid "Attempt to remove a non-empty table"
-msgstr ""
-
-#: nis/nis_error.c:67
-msgid "Error in accessing NIS+ cold start file. Is NIS+ installed?"
-msgstr ""
-
-#: nis/nis_error.c:68
-msgid "Full resync required for directory"
-msgstr ""
-
-#: nis/nis_error.c:69
-msgid "NIS+ operation failed"
-msgstr ""
-
-#: nis/nis_error.c:70
-msgid "NIS+ service is unavailable or not installed"
-msgstr ""
-
-#: nis/nis_error.c:71
-msgid "Yes, 42 is the meaning of life"
-msgstr ""
-
-#: nis/nis_error.c:72
-msgid "Unable to authenticate NIS+ server"
-msgstr ""
-
-#: nis/nis_error.c:73
-msgid "Unable to authenticate NIS+ client"
-msgstr ""
-
-#: nis/nis_error.c:74
-msgid "No file space on server"
-msgstr ""
-
-#: nis/nis_error.c:75
-msgid "Unable to create process on server"
-msgstr ""
-
-#: nis/nis_error.c:76
-msgid "Master server busy, full dump rescheduled."
-msgstr ""
-
-#: nis/nis_local_names.c:122
-#, c-format
-msgid "LOCAL entry for UID %d in directory %s not unique\n"
-msgstr ""
-
-#: nis/nis_print.c:51
-msgid "UNKNOWN"
-msgstr ""
-
-#: nis/nis_print.c:109
-msgid "BOGUS OBJECT\n"
-msgstr ""
-
-#: nis/nis_print.c:112
-msgid "NO OBJECT\n"
-msgstr ""
-
-#: nis/nis_print.c:115
-msgid "DIRECTORY\n"
-msgstr ""
-
-#: nis/nis_print.c:118
-msgid "GROUP\n"
-msgstr ""
-
-#: nis/nis_print.c:121
-msgid "TABLE\n"
-msgstr ""
-
-#: nis/nis_print.c:124
-msgid "ENTRY\n"
-msgstr ""
-
-#: nis/nis_print.c:127
-msgid "LINK\n"
-msgstr ""
-
-#: nis/nis_print.c:130
-msgid "PRIVATE\n"
-msgstr ""
-
-#: nis/nis_print.c:133
-msgid "(Unknown object)\n"
-msgstr ""
-
-#: nis/nis_print.c:167
-#, c-format
-msgid "Name : `%s'\n"
-msgstr ""
-
-#: nis/nis_print.c:168
-#, c-format
-msgid "Type : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:173
-msgid "Master Server :\n"
-msgstr ""
-
-#: nis/nis_print.c:175
-msgid "Replicate :\n"
-msgstr ""
-
-#: nis/nis_print.c:176
-#, c-format
-msgid "\tName : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:177
-msgid "\tPublic Key : "
-msgstr ""
-
-#: nis/nis_print.c:181
-msgid "None.\n"
-msgstr ""
-
-#: nis/nis_print.c:184
-#, c-format
-msgid "Diffie-Hellmann (%d bits)\n"
-msgstr ""
-
-#: nis/nis_print.c:189
-#, c-format
-msgid "RSA (%d bits)\n"
-msgstr ""
-
-#: nis/nis_print.c:192
-msgid "Kerberos.\n"
-msgstr ""
-
-#: nis/nis_print.c:195
-#, c-format
-msgid "Unknown (type = %d, bits = %d)\n"
-msgstr ""
-
-#: nis/nis_print.c:206
-#, c-format
-msgid "\tUniversal addresses (%u)\n"
-msgstr ""
-
-#: nis/nis_print.c:228
-msgid "Time to live : "
-msgstr ""
-
-#: nis/nis_print.c:230
-msgid "Default Access rights :\n"
-msgstr ""
-
-#: nis/nis_print.c:239
-#, c-format
-msgid "\tType : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:240
-msgid "\tAccess rights: "
-msgstr ""
-
-#: nis/nis_print.c:254
-msgid "Group Flags :"
-msgstr ""
-
-#: nis/nis_print.c:257
-msgid ""
-"\n"
-"Group Members :\n"
-msgstr ""
-
-#: nis/nis_print.c:269
-#, c-format
-msgid "Table Type : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:270
-#, c-format
-msgid "Number of Columns : %d\n"
-msgstr ""
-
-#: nis/nis_print.c:271
-#, c-format
-msgid "Character Separator : %c\n"
-msgstr ""
-
-#: nis/nis_print.c:272
-#, c-format
-msgid "Search Path : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:273
-msgid "Columns :\n"
-msgstr ""
-
-#: nis/nis_print.c:276
-#, c-format
-msgid "\t[%d]\tName : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:278
-msgid "\t\tAttributes : "
-msgstr ""
-
-#: nis/nis_print.c:280
-msgid "\t\tAccess Rights : "
-msgstr ""
-
-#: nis/nis_print.c:290
-msgid "Linked Object Type : "
-msgstr ""
-
-#: nis/nis_print.c:292
-#, c-format
-msgid "Linked to : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:302
-#, c-format
-msgid "\tEntry data of type %s\n"
-msgstr ""
-
-#: nis/nis_print.c:305
-#, c-format
-msgid "\t[%u] - [%u bytes] "
-msgstr ""
-
-#: nis/nis_print.c:308
-msgid "Encrypted data\n"
-msgstr ""
-
-#: nis/nis_print.c:310
-msgid "Binary data\n"
-msgstr ""
-
-#: nis/nis_print.c:326
-#, c-format
-msgid "Object Name : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:327
-#, c-format
-msgid "Directory : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:328
-#, c-format
-msgid "Owner : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:329
-#, c-format
-msgid "Group : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:330
-msgid "Access Rights : "
-msgstr ""
-
-#: nis/nis_print.c:332
-#, c-format
-msgid ""
-"\n"
-"Time to Live : "
-msgstr ""
-
-#: nis/nis_print.c:335
-#, c-format
-msgid "Creation Time : %s"
-msgstr ""
-
-#: nis/nis_print.c:337
-#, c-format
-msgid "Mod. Time : %s"
-msgstr ""
-
-#: nis/nis_print.c:338
-msgid "Object Type : "
-msgstr ""
-
-#: nis/nis_print.c:358
-#, c-format
-msgid " Data Length = %u\n"
-msgstr ""
-
-#: nis/nis_print.c:372
-#, c-format
-msgid "Status : %s\n"
-msgstr ""
-
-#: nis/nis_print.c:373
-#, c-format
-msgid "Number of objects : %u\n"
-msgstr ""
-
-#: nis/nis_print.c:377
-#, c-format
-msgid "Object #%d:\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:113
-#, c-format
-msgid "Group entry for \"%s.%s\" group:\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:121
-msgid " Explicit members:\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:126
-msgid " No explicit members\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:129
-msgid " Implicit members:\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:134
-msgid " No implicit members\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:137
-msgid " Recursive members:\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:142
-msgid " No recursive members\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:145 nis/nis_print_group_entry.c:161
-msgid " Explicit nonmembers:\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:150
-msgid " No explicit nonmembers\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:153
-msgid " Implicit nonmembers:\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:158
-msgid " No implicit nonmembers\n"
-msgstr ""
-
-#: nis/nis_print_group_entry.c:166
-msgid " No recursive nonmembers\n"
-msgstr ""
-
-#: nis/nss_nisplus/nisplus-publickey.c:101
-#: nis/nss_nisplus/nisplus-publickey.c:182
-#, c-format
-msgid "DES entry for netname %s not unique\n"
-msgstr ""
-
-#: nis/nss_nisplus/nisplus-publickey.c:218
-#, c-format
-msgid "netname2user: missing group id list in `%s'."
-msgstr ""
-
-#: nis/nss_nisplus/nisplus-publickey.c:300
-#: nis/nss_nisplus/nisplus-publickey.c:306
-#: nis/nss_nisplus/nisplus-publickey.c:370
-#: nis/nss_nisplus/nisplus-publickey.c:379
-#, c-format
-msgid "netname2user: (nis+ lookup): %s\n"
-msgstr ""
-
-#: nis/nss_nisplus/nisplus-publickey.c:319
-#, c-format
-msgid "netname2user: DES entry for %s in directory %s not unique"
-msgstr ""
-
-#: nis/nss_nisplus/nisplus-publickey.c:337
-#, c-format
-msgid "netname2user: principal name `%s' too long"
-msgstr ""
-
-#: nis/nss_nisplus/nisplus-publickey.c:392
-#, c-format
-msgid "netname2user: LOCAL entry for %s in directory %s not unique"
-msgstr ""
-
-#: nis/nss_nisplus/nisplus-publickey.c:399
-msgid "netname2user: should not have uid 0"
-msgstr ""
-
-#: nis/ypclnt.c:145
-#, c-format
-msgid "YPBINDPROC_DOMAIN: %s\n"
-msgstr ""
-
-#: nis/ypclnt.c:795
-msgid "Request arguments bad"
-msgstr ""
-
-#: nis/ypclnt.c:797
-msgid "RPC failure on NIS operation"
-msgstr ""
-
-#: nis/ypclnt.c:799
-msgid "Can't bind to server which serves this domain"
-msgstr ""
-
-#: nis/ypclnt.c:801
-msgid "No such map in server's domain"
-msgstr ""
-
-#: nis/ypclnt.c:803
-msgid "No such key in map"
-msgstr ""
-
-#: nis/ypclnt.c:805
-msgid "Internal NIS error"
-msgstr ""
-
-#: nis/ypclnt.c:807
-msgid "Local resource allocation failure"
-msgstr ""
-
-#: nis/ypclnt.c:809
-msgid "No more records in map database"
-msgstr ""
-
-#: nis/ypclnt.c:811
-msgid "Can't communicate with portmapper"
-msgstr ""
-
-#: nis/ypclnt.c:813
-msgid "Can't communicate with ypbind"
-msgstr ""
-
-#: nis/ypclnt.c:815
-msgid "Can't communicate with ypserv"
-msgstr ""
-
-#: nis/ypclnt.c:817
-msgid "Local domain name not set"
-msgstr ""
-
-#: nis/ypclnt.c:819
-msgid "NIS map database is bad"
-msgstr ""
-
-#: nis/ypclnt.c:821
-msgid "NIS client/server version mismatch - can't supply service"
-msgstr ""
-
-#: nis/ypclnt.c:825
-msgid "Database is busy"
-msgstr ""
-
-#: nis/ypclnt.c:827
-msgid "Unknown NIS error code"
-msgstr ""
-
-#: nis/ypclnt.c:862
-msgid "Internal ypbind error"
-msgstr ""
-
-#: nis/ypclnt.c:864
-msgid "Domain not bound"
-msgstr ""
-
-#: nis/ypclnt.c:866
-msgid "System resource allocation failure"
-msgstr ""
-
-#: nis/ypclnt.c:868
-msgid "Unknown ypbind error"
-msgstr ""
-
-#: nis/ypclnt.c:907
-msgid "yp_update: cannot convert host to netname\n"
-msgstr ""
-
-#: nis/ypclnt.c:919
-msgid "yp_update: cannot get server address\n"
-msgstr ""
-
-#: nscd/aicache.c:74 nscd/hstcache.c:436
-#, c-format
-msgid "Haven't found \"%s\" in hosts cache!"
-msgstr ""
-
-#: nscd/aicache.c:76 nscd/hstcache.c:438
-#, c-format
-msgid "Reloading \"%s\" in hosts cache!"
-msgstr ""
-
-#: nscd/cache.c:127
-#, c-format
-msgid "add new entry \"%s\" of type %s for %s to cache%s"
-msgstr ""
-
-#: nscd/cache.c:207 nscd/connections.c:501
-#, c-format
-msgid "cannot stat() file `%s': %s"
-msgstr ""
-
-#: nscd/connections.c:209
-msgid "Cannot run nscd in secure mode as unprivileged user"
-msgstr ""
-
-#: nscd/connections.c:243 nscd/connections.c:255 nscd/connections.c:266
-#, c-format
-msgid "invalid persistent database file \"%s\": %s"
-msgstr ""
-
-#: nscd/connections.c:257
-msgid "header size does not match"
-msgstr ""
-
-#: nscd/connections.c:268
-msgid "file size does not match"
-msgstr ""
-
-#: nscd/connections.c:285
-#, c-format
-msgid ""
-"suggested size of table for database %s larger than the persistent "
-"database's table"
-msgstr ""
-
-#: nscd/connections.c:295 nscd/connections.c:376
-#, c-format
-msgid "cannot create read-only descriptor for \"%s\"; no mmap"
-msgstr ""
-
-#: nscd/connections.c:355
-#, c-format
-msgid ""
-"database for %s corrupted or simultaneously used; remove %s manually if "
-"necessary and restart"
-msgstr ""
-
-#: nscd/connections.c:362
-#, c-format
-msgid "cannot create %s; no persistent database used"
-msgstr ""
-
-#: nscd/connections.c:365
-#, c-format
-msgid "cannot create %s; no sharing possible"
-msgstr ""
-
-#: nscd/connections.c:430
-#, c-format
-msgid "cannot write to database file %s: %s"
-msgstr ""
-
-#: nscd/connections.c:464
-#, c-format
-msgid "cannot set socket to close on exec: %s; disabling paranoia mode"
-msgstr ""
-
-#: nscd/connections.c:514
-#, c-format
-msgid "cannot open socket: %s"
-msgstr ""
-
-#: nscd/connections.c:531
-#, c-format
-msgid "cannot change socket to nonblocking mode: %s"
-msgstr ""
-
-#: nscd/connections.c:539
-#, c-format
-msgid "cannot set socket to close on exec: %s"
-msgstr ""
-
-#: nscd/connections.c:550
-#, c-format
-msgid "cannot enable socket to accept connections: %s"
-msgstr ""
-
-#: nscd/connections.c:628
-#, c-format
-msgid "provide access to FD %d, for %s"
-msgstr ""
-
-#: nscd/connections.c:640
-#, c-format
-msgid "cannot handle old request version %d; current version is %d"
-msgstr ""
-
-#: nscd/connections.c:689 nscd/connections.c:716
-#, c-format
-msgid "cannot write result: %s"
-msgstr ""
-
-#: nscd/connections.c:792 nscd/connections.c:1102
-#, c-format
-msgid "error getting callers id: %s"
-msgstr ""
-
-#: nscd/connections.c:850 nscd/connections.c:864
-#, c-format
-msgid "cannot open /proc/self/cmdline: %s; disabling paranoia mode"
-msgstr ""
-
-#: nscd/connections.c:904
-#, c-format
-msgid "cannot change to old UID: %s; disabling paranoia mode"
-msgstr ""
-
-#: nscd/connections.c:914
-#, c-format
-msgid "cannot change to old GID: %s; disabling paranoia mode"
-msgstr ""
-
-#: nscd/connections.c:927
-#, c-format
-msgid "cannot change to old working directory: %s; disabling paranoia mode"
-msgstr ""
-
-#: nscd/connections.c:955
-#, c-format
-msgid "re-exec failed: %s; disabling paranoia mode"
-msgstr ""
-
-#: nscd/connections.c:1080
-#, c-format
-msgid "short read while reading request: %s"
-msgstr ""
-
-#: nscd/connections.c:1130
-#, c-format
-msgid "key length in request too long: %d"
-msgstr ""
-
-#: nscd/connections.c:1143
-#, c-format
-msgid "short read while reading request key: %s"
-msgstr ""
-
-#: nscd/connections.c:1152
-#, c-format
-msgid "handle_request: request received (Version = %d) from PID %ld"
-msgstr ""
-
-#: nscd/connections.c:1157
-#, c-format
-msgid "handle_request: request received (Version = %d)"
-msgstr ""
-
-#: nscd/connections.c:1515
-#, c-format
-msgid "could only start %d threads; terminating"
-msgstr ""
-
-#: nscd/connections.c:1563 nscd/connections.c:1564 nscd/connections.c:1581
-#: nscd/connections.c:1590 nscd/connections.c:1603 nscd/connections.c:1609
-#: nscd/connections.c:1616
-#, c-format
-msgid "Failed to run nscd as user '%s'"
-msgstr ""
-
-#: nscd/connections.c:1582
-msgid "initial getgrouplist failed"
-msgstr ""
-
-#: nscd/connections.c:1591
-msgid "getgrouplist failed"
-msgstr ""
-
-#: nscd/connections.c:1604
-msgid "setgroups failed"
-msgstr ""
-
-#: nscd/grpcache.c:370 nscd/hstcache.c:386 nscd/initgrcache.c:382
-#: nscd/pwdcache.c:366
-#, c-format
-msgid "short write in %s: %s"
-msgstr ""
-
-#: nscd/grpcache.c:413 nscd/initgrcache.c:75
-#, c-format
-msgid "Haven't found \"%s\" in group cache!"
-msgstr ""
-
-#: nscd/grpcache.c:415 nscd/initgrcache.c:77
-#, c-format
-msgid "Reloading \"%s\" in group cache!"
-msgstr ""
-
-#: nscd/grpcache.c:506
-#, c-format
-msgid "Invalid numeric gid \"%s\"!"
-msgstr ""
-
-#: nscd/mem.c:389
-#, c-format
-msgid "freed %zu bytes in %s cache"
-msgstr ""
-
-#: nscd/mem.c:509
-#, c-format
-msgid "no more memory for database '%s'"
-msgstr ""
-
-#: nscd/nscd.c:100
-msgid "Read configuration data from NAME"
-msgstr ""
-
-#: nscd/nscd.c:102
-msgid "Do not fork and display messages on the current tty"
-msgstr ""
-
-#: nscd/nscd.c:103
-msgid "NUMBER"
-msgstr ""
-
-#: nscd/nscd.c:103
-msgid "Start NUMBER threads"
-msgstr ""
-
-#: nscd/nscd.c:104
-msgid "Shut the server down"
-msgstr ""
-
-#: nscd/nscd.c:105
-msgid "Print current configuration statistic"
-msgstr ""
-
-#: nscd/nscd.c:106
-msgid "TABLE"
-msgstr ""
-
-#: nscd/nscd.c:107
-msgid "Invalidate the specified cache"
-msgstr ""
-
-#: nscd/nscd.c:108
-msgid "TABLE,yes"
-msgstr ""
-
-#: nscd/nscd.c:109
-msgid "Use separate cache for each user"
-msgstr ""
-
-#: nscd/nscd.c:114
-msgid "Name Service Cache Daemon."
-msgstr ""
-
-#: nscd/nscd.c:156
-msgid "cannot read configuration file; this is fatal"
-msgstr ""
-
-#: nscd/nscd.c:167
-msgid "already running"
-msgstr ""
-
-#: nscd/nscd.c:182 nscd/nscd.c:237
-msgid "cannot fork"
-msgstr ""
-
-#: nscd/nscd.c:251
-msgid "Could not create log file"
-msgstr ""
-
-#: nscd/nscd.c:304 nscd/nscd.c:328 nscd/nscd_stat.c:162
-msgid "Only root is allowed to use this option!"
-msgstr ""
-
-#: nscd/nscd.c:378
-msgid "secure services not implemented anymore"
-msgstr ""
-
-#: nscd/nscd_conf.c:94
-#, c-format
-msgid "Parse error: %s"
-msgstr ""
-
-#: nscd/nscd_conf.c:194
-msgid "Must specify user name for server-user option"
-msgstr ""
-
-#: nscd/nscd_conf.c:201
-msgid "Must specify user name for stat-user option"
-msgstr ""
-
-#: nscd/nscd_conf.c:251
-#, c-format
-msgid "invalid value for 'reload-count': %u"
-msgstr ""
-
-#: nscd/nscd_conf.c:266
-msgid "Must specify value for restart-interval option"
-msgstr ""
-
-#: nscd/nscd_conf.c:269
-#, c-format
-msgid "Unknown option: %s %s %s"
-msgstr ""
-
-#: nscd/nscd_conf.c:282
-#, c-format
-msgid "cannot get current working directory: %s; disabling paranoia mode"
-msgstr ""
-
-#: nscd/nscd_stat.c:131
-#, c-format
-msgid "cannot write statistics: %s"
-msgstr ""
-
-#: nscd/nscd_stat.c:158
-#, c-format
-msgid "Only root or %s is allowed to use this option!"
-msgstr ""
-
-#: nscd/nscd_stat.c:169
-msgid "nscd not running!\n"
-msgstr ""
-
-#: nscd/nscd_stat.c:180
-msgid "write incomplete"
-msgstr ""
-
-#: nscd/nscd_stat.c:192
-msgid "cannot read statistics data"
-msgstr ""
-
-#: nscd/nscd_stat.c:195
-#, c-format
-msgid ""
-"nscd configuration:\n"
-"\n"
-"%15d server debug level\n"
-msgstr ""
-
-#: nscd/nscd_stat.c:219
-#, c-format
-msgid "%3ud %2uh %2um %2lus server runtime\n"
-msgstr ""
-
-#: nscd/nscd_stat.c:222
-#, c-format
-msgid " %2uh %2um %2lus server runtime\n"
-msgstr ""
-
-#: nscd/nscd_stat.c:224
-#, c-format
-msgid " %2um %2lus server runtime\n"
-msgstr ""
-
-#: nscd/nscd_stat.c:226
-#, c-format
-msgid " %2lus server runtime\n"
-msgstr ""
-
-#: nscd/nscd_stat.c:228
-#, c-format
-msgid ""
-"%15d current number of threads\n"
-"%15d maximum number of threads\n"
-"%15lu number of times clients had to wait\n"
-"%15s paranoia mode enabled\n"
-"%15lu restart internal\n"
-msgstr ""
-
-#: nscd/nscd_stat.c:261
-#, c-format
-msgid ""
-"\n"
-"%s cache:\n"
-"\n"
-"%15s cache is enabled\n"
-"%15s cache is persistent\n"
-"%15s cache is shared\n"
-"%15zu suggested size\n"
-"%15zu total data pool size\n"
-"%15zu used data pool size\n"
-"%15lu seconds time to live for positive entries\n"
-"%15lu seconds time to live for negative entries\n"
-"%15<PRIuMAX> cache hits on positive entries\n"
-"%15<PRIuMAX> cache hits on negative entries\n"
-"%15<PRIuMAX> cache misses on positive entries\n"
-"%15<PRIuMAX> cache misses on negative entries\n"
-"%15lu%% cache hit rate\n"
-"%15zu current number of cached values\n"
-"%15zu maximum number of cached values\n"
-"%15zu maximum chain length searched\n"
-"%15<PRIuMAX> number of delays on rdlock\n"
-"%15<PRIuMAX> number of delays on wrlock\n"
-"%15<PRIuMAX> memory allocations failed\n"
-"%15s check /etc/%s for changes\n"
-msgstr ""
-
-#: nscd/pwdcache.c:409
-#, c-format
-msgid "Haven't found \"%s\" in password cache!"
-msgstr ""
-
-#: nscd/pwdcache.c:411
-#, c-format
-msgid "Reloading \"%s\" in password cache!"
-msgstr ""
-
-#: nscd/pwdcache.c:503
-#, c-format
-msgid "Invalid numeric uid \"%s\"!"
-msgstr ""
-
-#: elf/../sysdeps/generic/dl-sysdep.c:486
-msgid "cannot create capability list"
-msgstr ""
-
-#: elf/../sysdeps/generic/dl-tls.c:785
-msgid "cannot create TLS data structures"
-msgstr ""
-
-#: elf/../sysdeps/generic/readelflib.c:35
-#, c-format
-msgid "file %s is truncated\n"
-msgstr ""
-
-#: elf/../sysdeps/generic/readelflib.c:67
-#, c-format
-msgid "%s is a 32 bit ELF file.\n"
-msgstr ""
-
-#: elf/../sysdeps/generic/readelflib.c:69
-#, c-format
-msgid "%s is a 64 bit ELF file.\n"
-msgstr ""
-
-#: elf/../sysdeps/generic/readelflib.c:71
-#, c-format
-msgid "Unknown ELFCLASS in file %s.\n"
-msgstr ""
-
-#: elf/../sysdeps/generic/readelflib.c:78
-#, c-format
-msgid "%s is not a shared object file (Type: %d).\n"
-msgstr ""
-
-#: elf/../sysdeps/generic/readelflib.c:109
-msgid "more than one dynamic segment\n"
-msgstr ""
-
-#: elf/../sysdeps/unix/sysv/linux/i386/readelflib.c:49
-#, c-format
-msgid "%s is for unknown machine %d.\n"
-msgstr ""
-
-#: elf/cache.c:70
-msgid "unknown"
-msgstr ""
-
-#: elf/cache.c:111
-msgid "Unknown OS"
-msgstr ""
-
-#: elf/cache.c:116
-#, c-format
-msgid ", OS ABI: %s %d.%d.%d"
-msgstr ""
-
-#: elf/cache.c:142 elf/ldconfig.c:1220
-#, c-format
-msgid "Can't open cache file %s\n"
-msgstr ""
-
-#: elf/cache.c:154
-msgid "mmap of cache file failed.\n"
-msgstr ""
-
-#: elf/cache.c:158 elf/cache.c:168
-msgid "File is not a cache file.\n"
-msgstr ""
-
-#: elf/cache.c:201 elf/cache.c:211
-#, c-format
-msgid "%d libs found in cache `%s'\n"
-msgstr ""
-
-#: elf/cache.c:410
-#, c-format
-msgid "Can't remove old temporary cache file %s"
-msgstr ""
-
-#: elf/cache.c:417
-#, c-format
-msgid "Can't create temporary cache file %s"
-msgstr ""
-
-#: elf/cache.c:425 elf/cache.c:434 elf/cache.c:438
-msgid "Writing of cache data failed"
-msgstr ""
-
-#: elf/cache.c:442
-msgid "Writing of cache data failed."
-msgstr ""
-
-#: elf/cache.c:449
-#, c-format
-msgid "Changing access rights of %s to %#o failed"
-msgstr ""
-
-#: elf/cache.c:454
-#, c-format
-msgid "Renaming of %s to %s failed"
-msgstr ""
-
-#: elf/dl-close.c:119
-msgid "shared object not open"
-msgstr ""
-
-#: elf/dl-deps.c:112 elf/dl-open.c:234
-msgid "DST not allowed in SUID/SGID programs"
-msgstr ""
-
-#: elf/dl-deps.c:125
-msgid "empty dynamics string token substitution"
-msgstr ""
-
-#: elf/dl-deps.c:131
-#, c-format
-msgid ""
-"cannot load auxiliary `%s' because of empty dynamic string token "
-"substitution\n"
-msgstr ""
-
-#: elf/dl-deps.c:461
-msgid "cannot allocate dependency list"
-msgstr ""
-
-#: elf/dl-deps.c:494 elf/dl-deps.c:549
-msgid "cannot allocate symbol search list"
-msgstr ""
-
-#: elf/dl-deps.c:534
-msgid "Filters not supported with LD_TRACE_PRELINKING"
-msgstr ""
-
-#: elf/dl-error.c:75
-msgid "DYNAMIC LINKER BUG!!!"
-msgstr ""
-
-#: elf/dl-error.c:108
-msgid "error while loading shared libraries"
-msgstr ""
-
-#: elf/dl-load.c:363
-msgid "cannot allocate name record"
-msgstr ""
-
-#: elf/dl-load.c:465 elf/dl-load.c:544 elf/dl-load.c:664 elf/dl-load.c:759
-msgid "cannot create cache for search path"
-msgstr ""
-
-#: elf/dl-load.c:567
-msgid "cannot create RUNPATH/RPATH copy"
-msgstr ""
-
-#: elf/dl-load.c:650
-msgid "cannot create search path array"
-msgstr ""
-
-#: elf/dl-load.c:836
-msgid "cannot stat shared object"
-msgstr ""
-
-#: elf/dl-load.c:911
-msgid "cannot open zero fill device"
-msgstr ""
-
-#: elf/dl-load.c:956 elf/dl-load.c:2144
-msgid "cannot create shared object descriptor"
-msgstr ""
-
-#: elf/dl-load.c:975 elf/dl-load.c:1620 elf/dl-load.c:1703
-msgid "cannot read file data"
-msgstr ""
-
-#: elf/dl-load.c:1019
-msgid "ELF load command alignment not page-aligned"
-msgstr ""
-
-#: elf/dl-load.c:1026
-msgid "ELF load command address/offset not properly aligned"
-msgstr ""
-
-#: elf/dl-load.c:1110
-msgid "cannot allocate TLS data structures for initial thread"
-msgstr ""
-
-#: elf/dl-load.c:1134
-msgid "cannot handle TLS data"
-msgstr ""
-
-#: elf/dl-load.c:1153
-msgid "object file has no loadable segments"
-msgstr ""
-
-#: elf/dl-load.c:1189
-msgid "failed to map segment from shared object"
-msgstr ""
-
-#: elf/dl-load.c:1213
-msgid "cannot dynamically load executable"
-msgstr ""
-
-#: elf/dl-load.c:1274
-msgid "cannot change memory protections"
-msgstr ""
-
-#: elf/dl-load.c:1293
-msgid "cannot map zero-fill pages"
-msgstr ""
-
-#: elf/dl-load.c:1307
-msgid "object file has no dynamic section"
-msgstr ""
-
-#: elf/dl-load.c:1330
-msgid "shared object cannot be dlopen()ed"
-msgstr ""
-
-#: elf/dl-load.c:1343
-msgid "cannot allocate memory for program header"
-msgstr ""
-
-#: elf/dl-load.c:1385
-msgid "cannot enable executable stack as shared object requires"
-msgstr ""
-
-#: elf/dl-load.c:1400
-msgid "cannot close file descriptor"
-msgstr ""
-
-#: elf/dl-load.c:1442
-msgid "cannot create searchlist"
-msgstr ""
-
-#: elf/dl-load.c:1620
-msgid "file too short"
-msgstr ""
-
-#: elf/dl-load.c:1643
-msgid "invalid ELF header"
-msgstr ""
-
-#: elf/dl-load.c:1652
-msgid "ELF file data encoding not big-endian"
-msgstr ""
-
-#: elf/dl-load.c:1654
-msgid "ELF file data encoding not little-endian"
-msgstr ""
-
-#: elf/dl-load.c:1658
-msgid "ELF file version ident does not match current one"
-msgstr ""
-
-#: elf/dl-load.c:1662
-msgid "ELF file OS ABI invalid"
-msgstr ""
-
-#: elf/dl-load.c:1664
-msgid "ELF file ABI version invalid"
-msgstr ""
-
-#: elf/dl-load.c:1667
-msgid "internal error"
-msgstr ""
-
-#: elf/dl-load.c:1674
-msgid "ELF file version does not match current one"
-msgstr ""
-
-#: elf/dl-load.c:1682
-msgid "only ET_DYN and ET_EXEC can be loaded"
-msgstr ""
-
-#: elf/dl-load.c:1688
-msgid "ELF file's phentsize not the expected size"
-msgstr ""
-
-#: elf/dl-load.c:2158
-msgid "cannot open shared object file"
-msgstr ""
-
-#: elf/dl-lookup.c:249
-msgid "relocation error"
-msgstr ""
-
-#: elf/dl-lookup.c:277
-msgid "symbol lookup error"
-msgstr ""
-
-#: elf/dl-open.c:118
-msgid "cannot extend global scope"
-msgstr ""
-
-#: elf/dl-open.c:180
-msgid "invalid caller"
-msgstr ""
-
-#: elf/dl-open.c:250
-msgid "empty dynamic string token substitution"
-msgstr ""
-
-#: elf/dl-open.c:416 elf/dl-open.c:427
-msgid "cannot create scope list"
-msgstr ""
-
-#: elf/dl-open.c:471
-msgid "TLS generation counter wrapped! Please report this."
-msgstr ""
-
-#: elf/dl-open.c:514
-msgid "invalid mode for dlopen()"
-msgstr ""
-
-#: elf/dl-open.c:531
-msgid "no more namespaces available for dlmopen()"
-msgstr ""
-
-#: elf/dl-open.c:544
-msgid "invalid target namespace in dlmopen()"
-msgstr ""
-
-#: elf/dl-reloc.c:55
-msgid "cannot allocate memory in static TLS block"
-msgstr ""
-
-#: elf/dl-reloc.c:195
-msgid "cannot make segment writable for relocation"
-msgstr ""
-
-#: elf/dl-reloc.c:275
-#, c-format
-msgid "%s: no PLTREL found in object %s\n"
-msgstr ""
-
-#: elf/dl-reloc.c:286
-#, c-format
-msgid "%s: out of memory to store relocation results for %s\n"
-msgstr ""
-
-#: elf/dl-reloc.c:301
-msgid "cannot restore segment prot after reloc"
-msgstr ""
-
-#: elf/dl-reloc.c:326
-msgid "cannot apply additional memory protection after relocation"
-msgstr ""
-
-#: elf/dl-sym.c:98
-msgid "RTLD_NEXT used in code not dynamically loaded"
-msgstr ""
-
-#: elf/dl-version.c:303
-msgid "cannot allocate version reference table"
-msgstr ""
-
-#: elf/ldconfig.c:135
-msgid "Print cache"
-msgstr ""
-
-#: elf/ldconfig.c:136
-msgid "Generate verbose messages"
-msgstr ""
-
-#: elf/ldconfig.c:137
-msgid "Don't build cache"
-msgstr ""
-
-#: elf/ldconfig.c:138
-msgid "Don't generate links"
-msgstr ""
-
-#: elf/ldconfig.c:139
-msgid "Change to and use ROOT as root directory"
-msgstr ""
-
-#: elf/ldconfig.c:139
-msgid "ROOT"
-msgstr ""
-
-#: elf/ldconfig.c:140
-msgid "CACHE"
-msgstr ""
-
-#: elf/ldconfig.c:140
-msgid "Use CACHE as cache file"
-msgstr ""
-
-#: elf/ldconfig.c:141
-msgid "CONF"
-msgstr ""
-
-#: elf/ldconfig.c:141
-msgid "Use CONF as configuration file"
-msgstr ""
-
-#: elf/ldconfig.c:142
-msgid ""
-"Only process directories specified on the command line. Don't build cache."
-msgstr ""
-
-#: elf/ldconfig.c:143
-msgid "Manually link individual libraries."
-msgstr ""
-
-#: elf/ldconfig.c:144
-msgid "FORMAT"
-msgstr ""
-
-#: elf/ldconfig.c:144
-msgid "Format to use: new, old or compat (default)"
-msgstr ""
-
-#: elf/ldconfig.c:152
-msgid "Configure Dynamic Linker Run Time Bindings."
-msgstr ""
-
-#: elf/ldconfig.c:310
-#, c-format
-msgid "Path `%s' given more than once"
-msgstr ""
-
-#: elf/ldconfig.c:350
-#, c-format
-msgid "%s is not a known library type"
-msgstr ""
-
-#: elf/ldconfig.c:375
-#, c-format
-msgid "Can't stat %s"
-msgstr ""
-
-#: elf/ldconfig.c:449
-#, c-format
-msgid "Can't stat %s\n"
-msgstr ""
-
-#: elf/ldconfig.c:459
-#, c-format
-msgid "%s is not a symbolic link\n"
-msgstr ""
-
-#: elf/ldconfig.c:478
-#, c-format
-msgid "Can't unlink %s"
-msgstr ""
-
-#: elf/ldconfig.c:484
-#, c-format
-msgid "Can't link %s to %s"
-msgstr ""
-
-#: elf/ldconfig.c:490
-msgid " (changed)\n"
-msgstr ""
-
-#: elf/ldconfig.c:492
-msgid " (SKIPPED)\n"
-msgstr ""
-
-#: elf/ldconfig.c:547
-#, c-format
-msgid "Can't find %s"
-msgstr ""
-
-#: elf/ldconfig.c:563
-#, c-format
-msgid "Can't lstat %s"
-msgstr ""
-
-#: elf/ldconfig.c:570
-#, c-format
-msgid "Ignored file %s since it is not a regular file."
-msgstr ""
-
-#: elf/ldconfig.c:578
-#, c-format
-msgid "No link created since soname could not be found for %s"
-msgstr ""
-
-#: elf/ldconfig.c:669
-#, c-format
-msgid "Can't open directory %s"
-msgstr ""
-
-#: elf/ldconfig.c:724 elf/ldconfig.c:771
-#, c-format
-msgid "Cannot lstat %s"
-msgstr ""
-
-#: elf/ldconfig.c:736
-#, c-format
-msgid "Cannot stat %s"
-msgstr ""
-
-#: elf/ldconfig.c:793 elf/readlib.c:92
-#, c-format
-msgid "Input file %s not found.\n"
-msgstr ""
-
-#: elf/ldconfig.c:844
-#, c-format
-msgid "libc5 library %s in wrong directory"
-msgstr ""
-
-#: elf/ldconfig.c:847
-#, c-format
-msgid "libc6 library %s in wrong directory"
-msgstr ""
-
-#: elf/ldconfig.c:850
-#, c-format
-msgid "libc4 library %s in wrong directory"
-msgstr ""
-
-#: elf/ldconfig.c:877
-#, c-format
-msgid ""
-"libraries %s and %s in directory %s have same soname but different type."
-msgstr ""
-
-#: elf/ldconfig.c:984
-#, c-format
-msgid "Can't open configuration file %s"
-msgstr ""
-
-#: elf/ldconfig.c:1048
-#, c-format
-msgid "%s:%u: bad syntax in hwcap line"
-msgstr ""
-
-#: elf/ldconfig.c:1054
-#, c-format
-msgid "%s:%u: hwcap index %lu above maximum %u"
-msgstr ""
-
-#: elf/ldconfig.c:1061 elf/ldconfig.c:1069
-#, c-format
-msgid "%s:%u: hwcap index %lu already defined as %s"
-msgstr ""
-
-#: elf/ldconfig.c:1072
-#, c-format
-msgid "%s:%u: duplicate hwcap %lu %s"
-msgstr ""
-
-#: elf/ldconfig.c:1094
-msgid "need absolute file name for configuration file when using -r"
-msgstr ""
-
-#: elf/ldconfig.c:1131
-#, c-format
-msgid "%s:%u: cannot read directory %s"
-msgstr ""
-
-#: elf/ldconfig.c:1171
-#, c-format
-msgid "relative path `%s' used to build cache"
-msgstr ""
-
-#: elf/ldconfig.c:1199
-msgid "Can't chdir to /"
-msgstr ""
-
-#: elf/ldconfig.c:1241
-#, c-format
-msgid "Can't open cache file directory %s\n"
-msgstr ""
-
-#: elf/readlib.c:98
-#, c-format
-msgid "Cannot fstat file %s.\n"
-msgstr ""
-
-#: elf/readlib.c:109
-#, c-format
-msgid "File %s is empty, not checked."
-msgstr ""
-
-#: elf/readlib.c:115
-#, c-format
-msgid "File %s is too small, not checked."
-msgstr ""
-
-#: elf/readlib.c:125
-#, c-format
-msgid "Cannot mmap file %s.\n"
-msgstr ""
-
-#: elf/readlib.c:163
-#, c-format
-msgid "%s is not an ELF file - it has the wrong magic bytes at the start.\n"
-msgstr ""
-
-#: elf/sprof.c:77
-msgid "Output selection:"
-msgstr ""
-
-#: elf/sprof.c:79
-msgid "print list of count paths and their number of use"
-msgstr ""
-
-#: elf/sprof.c:81
-msgid "generate flat profile with counts and ticks"
-msgstr ""
-
-#: elf/sprof.c:82
-msgid "generate call graph"
-msgstr ""
-
-#: elf/sprof.c:89
-msgid ""
-"Read and display shared object profiling data.\013For bug reporting "
-"instructions, please see:\n"
-"<http://www.gnu.org/software/libc/bugs.html>.\n"
-msgstr ""
-
-#: elf/sprof.c:94
-msgid "SHOBJ [PROFDATA]"
-msgstr ""
-
-#: elf/sprof.c:400
-#, c-format
-msgid "failed to load shared object `%s'"
-msgstr ""
-
-#: elf/sprof.c:409
-msgid "cannot create internal descriptors"
-msgstr ""
-
-#: elf/sprof.c:528
-#, c-format
-msgid "Reopening shared object `%s' failed"
-msgstr ""
-
-#: elf/sprof.c:535 elf/sprof.c:629
-msgid "reading of section headers failed"
-msgstr ""
-
-#: elf/sprof.c:543 elf/sprof.c:637
-msgid "reading of section header string table failed"
-msgstr ""
-
-#: elf/sprof.c:569
-#, c-format
-msgid "*** Cannot read debuginfo file name: %m\n"
-msgstr ""
-
-#: elf/sprof.c:589
-msgid "cannot determine file name"
-msgstr ""
-
-#: elf/sprof.c:622
-msgid "reading of ELF header failed"
-msgstr ""
-
-#: elf/sprof.c:658
-#, c-format
-msgid "*** The file `%s' is stripped: no detailed analysis possible\n"
-msgstr ""
-
-#: elf/sprof.c:688
-msgid "failed to load symbol data"
-msgstr ""
-
-#: elf/sprof.c:755
-msgid "cannot load profiling data"
-msgstr ""
-
-#: elf/sprof.c:764
-msgid "while stat'ing profiling data file"
-msgstr ""
-
-#: elf/sprof.c:772
-#, c-format
-msgid "profiling data file `%s' does not match shared object `%s'"
-msgstr ""
-
-#: elf/sprof.c:783
-msgid "failed to mmap the profiling data file"
-msgstr ""
-
-#: elf/sprof.c:791
-msgid "error while closing the profiling data file"
-msgstr ""
-
-#: elf/sprof.c:800 elf/sprof.c:870
-msgid "cannot create internal descriptor"
-msgstr ""
-
-#: elf/sprof.c:846
-#, c-format
-msgid "`%s' is no correct profile data file for `%s'"
-msgstr ""
-
-#: elf/sprof.c:1027 elf/sprof.c:1085
-msgid "cannot allocate symbol data"
-msgstr ""