diff options
Diffstat (limited to 'Makeconfig')
-rw-r--r-- | Makeconfig | 121 |
1 files changed, 44 insertions, 77 deletions
@@ -99,7 +99,20 @@ binfmt-subdir = aout endif # Complete path to sysdep dirs. -export full_config_sysdirs := $(addprefix $(..),$(config-sysdirs)) +# `configure' writes a definition of `config-sysdirs' in `config.make'. +sysdirs := $(foreach D,$(config-sysdirs),$(firstword $(filter /%,$D) $(..)$D)) + +# Add-ons that contribute sysdeps trees get added to the include list +# after sysdeps/generic. This makes #include <sysdeps/...> work right +# to find specific add-on files without assuming the add-on directory name. +# It also means that headers can go into an add-on's base directory +# instead of the add-on needing a sysdeps/generic of its own. ++sysdep_dirs := $(sysdirs) $(foreach add-on,$(sysdeps-add-ons),\ + $(firstword $(filter /%,$(add-on)) \ + $(..)$(add-on))) +ifdef objdir ++sysdep_dirs := $(objdir) $(+sysdep_dirs) +endif # Run config.status to update config.make and config.h. We don't show the # dependence of config.h to Make, because it is only touched when it @@ -113,16 +126,16 @@ $(common-objpfx)config.make: $(common-objpfx)config.status \ # Find all the add-on and sysdeps configure fragments, to make sure we # re-run configure when any of them changes. $(common-objpfx)config.status: $(..)version.h $(..)configure \ - $(foreach dir,$(full_config_sysdirs),\ - $(wildcard \ - $(dir)/Implies) \ + $(foreach dir,$(sysdirs),\ + $(wildcard $(dir)/Implies) \ $(patsubst %.in,%,\ $(firstword $(wildcard \ $(addprefix $(dir)/,configure configure.in))))) \ $(patsubst %.in,%,\ - $(foreach dir,$(add-ons),\ + $(foreach add-on,$(add-ons),\ $(firstword $(wildcard \ - $(addprefix $(..)$(dir)/,configure configure.in))))) + $(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\ + configure configure.in))))) @cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \ echo The GNU C library has not been configured. >&2; \ echo Run \`configure\' to configure it before building. >&2; \ @@ -632,11 +645,10 @@ endif # $(+cflags) == "" # include files (including ones given in angle brackets) in the parent # library source directory, in the include directory, and in the # current directory. -# `+sysdep-includes' will be defined by Makerules. -+includes = -I$(..)include \ - $(patsubst %/,-I%,$(objpfx)) $(+sysdep-includes) \ - $(patsubst %/,-I%,$(..)) $(libio-include) $(includes) -I. \ - $(sysincludes) ++sysdep-includes = $(addprefix -I,$(+sysdep_dirs)) ++includes = -I$(..)include $(if $(subdir),$(objpfx:%/=-I%)) \ + $(+sysdep-includes) \ + $(patsubst %/,-I%,$(..)) $(libio-include) -I. $(sysincludes) # Since libio has several internal header files, we use a -I instead # of many little headers in the include directory. @@ -753,12 +765,10 @@ endif move-if-change = $(SHELL) $(..)scripts/move-if-change --include $(common-objpfx)sysd-dirs - -ifeq ($(sysd-dirs-done),t) -include $(common-objpfx)sysd-sorted subdirs = $(sorted-subdirs) -endif +subdir-srcdirs = $(foreach dir,$(subdirs),\ + $(firstword $($(dir)-srcdir) $(..)$(dir))) ifeq (yes, $(build-shared)) @@ -789,9 +799,8 @@ ifndef avoid-generated # This lets add-ons give more-specific matches that override defaults # in the top-level file. $(common-objpfx)shlib-versions.v.i: \ - $(wildcard $(patsubst %, $(..)%/shlib-versions,$(add-ons) \ - $(config-sysdirs) \ - $(subdirs))) \ + $(wildcard $(+sysdep_dirs:=/shlib-versions) \ + $(subdir-srcdirs:=/shlib-versions)) \ $(..)shlib-versions soversions-default-setname = $(patsubst %, %,\ @@ -891,81 +900,39 @@ endif # These are the subdirectories containing the library source. The order # is more or less arbitrary. The sorting step will take care of the -# dependencies. Only the $(binfmt-subdir) should always be kept at the -# end of the list. +# dependencies. all-subdirs = csu assert ctype locale intl catgets math setjmp signal \ - stdlib stdio-common libio malloc string wcsmbs time dirent \ + stdlib stdio-common libio malloc string wcsmbs time dirent \ grp pwd posix io termios resource misc socket sysvipc gmon \ gnulib iconv iconvdata wctype manual shadow po argp \ - crypt $(add-ons) nss localedata timezone rt conform debug \ - $(sysdep-subdirs) $(dlfcn) $(binfmt-subdir) -all-subdirs := $(filter-out $(sysdep-inhibit-subdirs),$(all-subdirs)) - -# The mach and hurd subdirectories have many generated header files which -# much of the rest of the library depends on, so it is best to build them -# first (and mach before hurd, at that). The before-compile additions in -# sysdeps/{mach,hurd}/Makefile should make it reliably work for these files -# not to exist when making in other directories, but it will be slower that -# way with more somewhat expensive `make' invocations. -subdirs := $(filter mach,$(subdirs)) $(filter hurd,$(subdirs)) \ - $(filter-out mach hurd,$(subdirs)) + crypt nss localedata timezone rt conform debug \ + $(add-on-subdirs) $(dlfcn) $(binfmt-subdir) ifndef avoid-generated -all-Subdirs-files = $(wildcard $(config-sysdirs:%=$(..)%/Subdirs)) -$(common-objpfx)sysd-dirs: $(common-objpfx)config.make $(all-Subdirs-files) - $(AWK) 'BEGIN { subdirs = ""; inhibit = "" }; \ - /^#/ { next }; \ - /^[^-]/ { subdirs = subdirs " " $$0 }; \ - /^-/ { inhibit = inhibit " " substr($$0, 2) }; \ - END { printf "sysdep-subdirs =%s\n", subdirs; \ - printf "sysdep-inhibit-subdirs =%s\n", inhibit; \ - print "sysd-dirs-done = t" }' \ - $(patsubst $<,/dev/null,$^) > $@-tmp - mv -f $@-tmp $@ - -all-Depend-files = $(wildcard $(..)*/Depend) -$(common-objpfx)sysd-sorted: $(..)scripts/gen-sorted.awk $(all-Depend-files) \ - $(common-objpfx)sysd-dirs $(..)Makeconfig - { { dirs='$(patsubst $(..)%/Depend,%,$(filter %/Depend,$^))'; \ - for d in $$dirs; do \ - while read on; do \ - echo "depend $$d $$on"; \ - done < $(..)$$d/Depend; \ - done; \ - for f in $(all-subdirs); do \ - echo $$f; \ - done; \ - } | $(AWK) -f $< && \ - echo sysd-sorted-done = t; \ - } > $@-tmp +all-Depend-files := $(wildcard $(foreach dir,$(all-subdirs),\ + $(firstword $($(dir)-srcdir) \ + $(..)$(dir))/Depend)) +$(common-objpfx)sysd-sorted: $(..)scripts/gen-sorted.awk \ + $(common-objpfx)config.make $(..)Makeconfig \ + $(wildcard $(sysdirs:=/Subdirs)) \ + $(all-Depend-files) + $(AWK) -f $< \ + -v subdirs='$(all-subdirs)' \ + -v srcpfx='$(..)' \ + $(filter %/Subdirs %/Depend,$^) > $@-tmp mv -f $@-tmp $@ $(all-Depend-files): ; endif # Let sysdeps/ subdirs contain a Makeconfig fragment for us to include here. -sysdep-makeconfigs := $(wildcard $(patsubst %,$(..)%/Makeconfig,\ - $(config-sysdirs) $(add-ons))) - +sysdep-makeconfigs := $(wildcard $(+sysdep_dirs:=/Makeconfig)) ifneq (,$(sysdep-makeconfigs)) -Makeconfig-doing-sysdep := $(sysdep-makeconfigs) -# Before each one, include ourselves again to do the bit below that -# will set `Makeconfig-add-on' in an add-on's Makeconfig fragment. -include $(foreach M,$(sysdep-makeconfigs),$(..)Makeconfig $M) +include $(sysdep-makeconfigs) endif endif # Makeconfig not yet included -# The whole body above didn't run when we are included as a subroutine -# of ourselves in the sysdep-makeconfigs include line. This bit runs. -ifneq (,$(Makeconfig-doing-sysdep)) -sysdep-Makeconfig := $(firstword $(Makeconfig-doing-sysdep)) -Makeconfig-doing-sysdep := $(filter-out $(sysdep-Makeconfig),\ - $(Makeconfig-doing-sysdep)) -Makeconfig-add-on := $(filter $(add-ons),$(patsubst $(..)%/Makeconfig,%,\ - $(sysdep-Makeconfig))) -endif - # Local Variables: # mode: makefile # End: |