Update.

1998-03-30 12:53  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/i386/i486/bits/string.h (__strcat_c) [__i686__]: Correct
	scanning for \0.
	(__strncat_g): Add i686 specific code.

1998-03-30  Andreas Jaeger  <aj@arthur.rhein-neckar.de>

	* manual/install.texi (Reporting Bugs): Ask to include section
	names in reports.

1998-03-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* sysdeps/unix/sysv/linux/Makefile ($(objpfx)syscall-%.h): Emit
	guard against direct inclusion.

1998-03-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	Rework support for libc_nonshared.a:
	* Makeconfig (object-suffixes-for-libc): New variable.
	* Rules: Remove handling of static-only and shared-only routines.
	* Makerules: Handle them here instead.  Use
	object-suffixes-for-libc instead of object-suffixes when dealing
	with libc objects.
	(object-suffixes-for-rules): Remove variable.
	(elide-routines.oS): Elide all routines except static-only
	routines.
	($(objpfx)stamp.oS): Special rule for when static-only-routines is
	empty.
	(installed-libcs): Remove special case for .oS.
	(rmobjs): Likewise.

1998-03-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* Makefile (do-collate-test, do-xfrm-test, do-tst-fmon,
	do-tst-rpmatch): New targets.
	(test): Use them.
	(install-locales): Ignore comment lines.

1998-03-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* elf/Makefile ($(objpfx)ld.so): Depend on version script.
	($(objpfx)trusted-dirs.h): Depend also on $(..)Makeconfig.
	($(objpfx)rtldtbl.h): Likewise.
	(CPPFLAGS-dl-load.c): Fix reference to object directory.

1998-03-30 09:36  Ulrich Drepper  <drepper@cygnus.com>

	* manual/string.texi (Finding Tokens in a String): Extend strsep
	description and correct example.

1998-03-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* manual/socket.texi: Remove misguided explicit line breaks and
	fix the formatting problem instead by reformulating the
	paragraphs.
	* manual/filesys.texi: Likewise.
	* manual/conf.texi: Likewise.  Don't typeset table with index
	fonts, that looks worse than a minimally overfull line.

1998-03-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* nscd/Makefile (nscd-modules): Move definition outside of
	conditional.

	* pwd/Makefile: Use have-thread-library to test for thread
	library.

1998-03-30  Andreas Jaeger  <aj@arthur.rhein-neckar.de>

	* nss/getXXent_r.c (INTERNAL): Remove unused variable current_nip.

	* iconvdata/uhc.c (gconv): Remove unused variable idx.

1998-03-30  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/unix/sysv/linux/Dist: Add lddlibc4.c.

5 files changed, 24 insertions, 19 deletions

diff --git a/manual/conf.texi b/manual/conf.texi
index 34554bc..86e29a8 100644
--- a/manual/conf.texi
+++ b/manual/conf.texi
@@ -315,10 +315,6 @@ Here are the symbolic constants for use as the @var{parameter} argument
 to @code{sysconf}.  The values are all integer constants (more
 specifically, enumeration type values).
 
-@c This table runs a bit wide.
-@iftex
-@indexfonts
-@end iftex
 @table @code
 @comment unistd.h
 @comment POSIX.1
@@ -608,7 +604,7 @@ Inquire about the parameter corresponding to @code{_POSIX_TTY_NAME_MAX}.
 @comment POSIX.1
 @item _SC_THREAD_DESTRUCTOR_ITERATIONS
 Inquire about the parameter corresponding to
-@code{_POSIX_THREAD_DESTRUCTOR_@*ITERATIONS}.
+@code{_POSIX_THREAD_DESTRUCTOR_ITERATIONS}.
 
 @comment unistd.h
 @comment POSIX.1
@@ -964,9 +960,6 @@ Inquire about  the parameter corresponding to @code{NL_SETMAX}.
 @item _SC_NL_TEXTMAX
 Inquire about  the parameter corresponding to @code{NL_TEXTMAX}.
 @end table
-@iftex
-@textfonts
-@end iftex
 
 @node Examples of Sysconf
 @subsection Examples of @code{sysconf}
diff --git a/manual/filesys.texi b/manual/filesys.texi
index 47f43ad..c3ab7c5 100644
--- a/manual/filesys.texi
+++ b/manual/filesys.texi
@@ -86,9 +86,8 @@ Permission to read or search a component of the file name was denied.
 @end table
 @end deftypefun
 
-Here is an example showing how you could implement the behavior of GNU's@*
-@w{@code{getcwd (NULL, 0)}} using only the standard behavior of
-@code{getcwd}:
+You could implement the behavior of GNU's @w{@code{getcwd (NULL, 0)}}
+using only the standard behavior of @code{getcwd}:
 
 @smallexample
 char *
diff --git a/manual/install.texi b/manual/install.texi
index 0efffde..35e257e 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -406,4 +406,6 @@ doesn't tell you, that's a bug in the manual.  Report that too!  If the
 function's behavior disagrees with the manual, then either the library
 or the manual has a bug, so report the disagreement.  If you find any
 errors or omissions in this manual, please report them to the Internet
-address @email{bug-glibc-manual@@gnu.org}.
+address @email{bug-glibc-manual@@gnu.org}.  If you refer to specific
+sections when reporting on the manual, please include the section names
+for easier identification.
diff --git a/manual/socket.texi b/manual/socket.texi
index dcd288b..cc84969 100644
--- a/manual/socket.texi
+++ b/manual/socket.texi
@@ -791,8 +791,8 @@ packaged inside a structure of type @code{struct in_addr}.  It would
 be better if the usage were made consistent, but it is not hard to extract
 the integer from the structure or put the integer into a structure.
 
-The following basic definitions for Internet addresses appear in the
-header file@*@file{netinet/in.h}:
+The following basic definitions for Internet addresses are declared in
+the header file @file{netinet/in.h}:
 @pindex netinet/in.h
 
 @comment netinet/in.h
@@ -868,10 +868,10 @@ own variables to this value.
 @pindex arpa/inet.h
 @noindent
 These additional functions for manipulating Internet addresses are
-declared in@*@file{arpa/inet.h}.  They represent Internet addresses in
-network byte order; they represent network numbers and
-local-address-within-network numbers in host byte order.
-@xref{Byte Order}, for an explanation of network and host byte order.
+declared in the header file @file{arpa/inet.h}.  They represent Internet
+addresses in network byte order; they represent network numbers and
+local-address-within-network numbers in host byte order.  @xref{Byte
+Order}, for an explanation of network and host byte order.
 
 @comment arpa/inet.h
 @comment BSD
@@ -2718,7 +2718,7 @@ this section.
 @pindex sys/socket.h
 @noindent
 Here is a table of socket-level option names; all are defined in the
-header file@*@file{sys/socket.h}.
+header file @file{sys/socket.h}.
 
 @table @code
 @comment sys/socket.h
diff --git a/manual/string.texi b/manual/string.texi
index f33303b..dd3c68d 100644
--- a/manual/string.texi
+++ b/manual/string.texi
@@ -1182,6 +1182,12 @@ moving pointer has to be done by the user.  Successive calls to
 @var{delimiter}, returning the address of the next token and updating
 @var{string_ptr} to point to the beginning of the next token.
 
+If the input string contains more than one character from
+@var{delimiter} in a row @code{strsep} returns an empty string for each
+pair of characters from @var{delimiter}.  This means that a program
+normally should test for @code{strsep} returning an empty string before
+processing it.
+
 This function was introduced in 4.3BSD and therefore is widely available.
 @end deftypefun
 
@@ -1206,8 +1212,13 @@ token = strsep (&running, delimiters);    /* token => "words" */
 token = strsep (&running, delimiters);    /* token => "separated" */
 token = strsep (&running, delimiters);    /* token => "by" */
 token = strsep (&running, delimiters);    /* token => "spaces" */
+token = strsep (&running, delimiters);    /* token => "" */
+token = strsep (&running, delimiters);    /* token => "" */
+token = strsep (&running, delimiters);    /* token => "" */
 token = strsep (&running, delimiters);    /* token => "and" */
+token = strsep (&running, delimiters);    /* token => "" */
 token = strsep (&running, delimiters);    /* token => "punctuation" */
+token = strsep (&running, delimiters);    /* token => "" */
 token = strsep (&running, delimiters);    /* token => NULL */
 @end smallexample