Update.

	* sysdeps/unix/sysv/linux/scsi/sg.h: Integrate changes from Linux
	2.3.43.

2000-03-02  Andreas Jaeger  <aj@suse.de>

3 files changed, 207 insertions, 99 deletions

diff --git a/ChangeLog b/ChangeLog
index 035e49e..b7cf76d 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,10 @@
 2000-03-02  Andreas Jaeger  <aj@suse.de>
 
+	* sysdeps/unix/sysv/linux/scsi/sg.h: Integrate changes from Linux
+	2.3.43.
+
+2000-03-02  Andreas Jaeger  <aj@suse.de>
+
 	* resolv/Makefile (headers): Add arpa/nameser_compat.h.
 
 2000-03-01  Andreas Jaeger  <aj@suse.de>
diff --git a/localedata/ChangeLog b/localedata/ChangeLog
index 79b1508..39a35a6 100644
--- a/localedata/ChangeLog
+++ b/localedata/ChangeLog
@@ -1,3 +1,8 @@
+2000-03-01  Andreas Jaeger  <aj@suse.de>
+
+	* locales/gv_GB: New file.
+        From Pablo Saratxaga <pablo@mandrakesoft.com>.
+
 2000-03-03  Ulrich Drepper  <drepper@redhat.com>
 
 	* charmaps/ISO-8859-14: Remove wrong duplicate mapping for /xA9.
diff --git a/sysdeps/unix/sysv/linux/scsi/sg.h b/sysdeps/unix/sysv/linux/scsi/sg.h
index 59e0310..077ccd3 100644
--- a/sysdeps/unix/sysv/linux/scsi/sg.h
+++ b/sysdeps/unix/sysv/linux/scsi/sg.h
@@ -1,4 +1,4 @@
-/* Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
+/* Copyright (C) 1997, 1998, 1999, 2000  Free Software Foundation, Inc.
    This file is part of the GNU C Library.
 
    The GNU C Library is free software; you can redistribute it and/or
@@ -28,11 +28,191 @@
 
 #include <features.h>
 
-/* An SG device is accessed by writing "packets" to it, the replies
-   are then read using the read call.  The same header is used for
-   replies; ignore the reply_len field.  */
 
-#define SG_MAX_SENSE	16
+/* New interface introduced in the 3.x SG drivers follows */
+
+/* Same structure as used by readv() Linux system call. It defines one
+   scatter-gather element. */
+typedef struct sg_iovec
+{                      
+  void * iov_base;            /* Starting address  */
+  size_t iov_len;             /* Length in bytes  */
+} sg_iovec_t;
+
+
+typedef struct sg_io_hdr
+{
+  char interface_id;          /* [i] 'S' for SCSI generic (required) */
+  unsigned char cmd_len;      /* [i] SCSI command length ( <= 16 bytes) */
+  unsigned char iovec_count;  /* [i] 0 implies no scatter gather */
+  unsigned char mx_sb_len;    /* [i] max length to write to sbp */
+  int dxfer_direction;        /* [i] data transfer direction  */
+  unsigned int dxfer_len;     /* [i] byte count of data transfer */
+  void * dxferp;              /* [i], [*io] points to data transfer memory
+				 or scatter gather list */
+  unsigned char * cmdp;       /* [i], [*i] points to command to perform */
+  unsigned char * sbp;        /* [i], [*o] points to sense_buffer memory */
+  unsigned int timeout;       /* [i] MAX_UINT->no timeout (unit: millisec) */
+  unsigned int flags;         /* [i] 0 -> default, see SG_FLAG... */
+  int pack_id;                /* [i->o] unused internally (normally) */
+  void * usr_ptr;             /* [i->o] unused internally */
+  unsigned char status;       /* [o] scsi status */
+  unsigned char masked_status;/* [o] shifted, masked scsi status */
+  unsigned char msg_status;   /* [o] messaging level data (optional) */
+  unsigned char sb_len_wr;    /* [o] byte count actually written to sbp */
+  unsigned short int host_status; /* [o] errors from host adapter */
+  unsigned short int driver_status;/* [o] errors from software driver */
+  int resid;                  /* [o] dxfer_len - actual_transferred */
+  unsigned int duration;      /* [o] time taken by cmd (unit: millisec) */
+  unsigned int info;          /* [o] auxiliary information */
+} sg_io_hdr_t;
+
+
+/* Use negative values to flag difference from original sg_header structure.  */
+#define SG_DXFER_NONE -1        /* e.g. a SCSI Test Unit Ready command */
+#define SG_DXFER_TO_DEV -2      /* e.g. a SCSI WRITE command */
+#define SG_DXFER_FROM_DEV -3    /* e.g. a SCSI READ command */
+#define SG_DXFER_TO_FROM_DEV -4 /* treated like SG_DXFER_FROM_DEV with the
+				   additional property than during indirect
+				   IO the user buffer is copied into the
+				   kernel buffers before the transfer */
+
+
+/* following flag values can be "or"-ed together */
+#define SG_FLAG_DIRECT_IO 1     /* default is indirect IO */
+#define SG_FLAG_LUN_INHIBIT 2   /* default is to put device's lun into */
+				/* the 2nd byte of SCSI command */
+#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
+				/* user space (debug indirect IO) */
+
+/* The following 'info' values are "or"-ed together.  */
+#define SG_INFO_OK_MASK	0x1
+#define SG_INFO_OK	0x0	/* no sense, host nor driver "noise" */
+#define SG_INFO_CHECK	0x1     /* something abnormal happened */
+
+#define SG_INFO_DIRECT_IO_MASK	0x6
+#define SG_INFO_INDIRECT_IO 	0x0	/* data xfer via kernel buffers (or no xfer) */
+#define SG_INFO_DIRECT_IO 	0x2	/* direct IO requested and performed */
+#define SG_INFO_MIXED_IO 	0x4	/* part direct, part indirect IO */
+
+
+/* Request information about a specific SG device, used by
+   SG_GET_SCSI_ID ioctl ().  */
+struct sg_scsi_id {
+  /* Host number as in "scsi<n>" where 'n' is one of 0, 1, 2 etc.  */
+  int host_no;
+  int channel;
+  /* SCSI id of target device.  */
+  int scsi_id;
+  int lun;
+  /* TYPE_... defined in <scsi/scsi.h>.  */
+  int scsi_type;
+  /* Host (adapter) maximum commands per lun.  */
+  short int h_cmd_per_lun;
+  /* Device (or adapter) maximum queue length.  */
+  short int d_queue_depth;
+  /* Unused, set to 0 for now.  */
+  int unused[2];
+};
+
+/* Used by SG_GET_REQUEST_TABLE ioctl().  */
+typedef struct sg_req_info {
+    char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
+    char orphan;        /* 0 -> normal request, 1 -> from interruped SG_IO */
+    char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
+    char problem;       /* 0 -> no problem detected, 1 -> error to report */
+    int pack_id;        /* pack_id associated with request */
+    void * usr_ptr;     /* user provided pointer (in new interface) */
+    unsigned int duration; /* millisecs elapsed since written (req_state==1)
+			      or request duration (req_state==2) */
+    int unused;
+} sg_req_info_t;
+
+
+/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
+ [Those that only apply to the SG 2.x drivers are at the end of the file.]
+ (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
+
+#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
+
+/* Used to configure SCSI command transformation layer for ATAPI devices */
+/* Only supported by the ide-scsi driver */
+#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
+		      /* 3rd arg = 0 to disable transform, 1 to enable it */
+#define SG_GET_TRANSFORM 0x2205
+
+#define SG_SET_RESERVED_SIZE 0x2275  /* request a new reserved buffer size */
+#define SG_GET_RESERVED_SIZE 0x2272  /* actual size of reserved buffer */
+
+/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
+#define SG_GET_SCSI_ID 0x2276   /* Yields fd's bus, chan, dev, lun + type */
+/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
+
+/* Override host setting and always DMA using low memory ( <16MB on i386) */
+#define SG_SET_FORCE_LOW_DMA 0x2279  /* 0-> use adapter setting, 1-> force */
+#define SG_GET_LOW_DMA 0x227a   /* 0-> use all ram for dma; 1-> low dma ram */
+
+/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
+   tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
+   If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
+   then pack_id ignored by read() and oldest readable fetched. */
+#define SG_SET_FORCE_PACK_ID 0x227b
+#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
+
+#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
+
+/* Yields max scatter gather tablesize allowed by current host adapter */
+#define SG_GET_SG_TABLESIZE 0x227F  /* 0 implies can't do scatter gather */
+
+#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
+
+/* Returns -EBUSY if occupied else takes as input: 0 -> do nothing,
+   1 -> device reset or  2 -> bus reset (may not be activated yet) */
+#define SG_SCSI_RESET 0x2284
+
+/* synchronous SCSI command ioctl, (only in version 3 interface) */
+#define SG_IO 0x2285   /* similar effect as write() followed by read() */
+
+#define SG_GET_REQUEST_TABLE 0x2286   /* yields table of active requests */
+
+/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
+#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
+#define SG_GET_KEEP_ORPHAN 0x2288
+
+
+#define SG_SCATTER_SZ (8 * 4096)  /* PAGE_SIZE not available to user */
+/* Largest size (in bytes) a single scatter-gather list element can have.
+   The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on
+   i386]. The minimum value is PAGE_SIZE. If scatter-gather not supported
+   by adapter then this value is the largest data block that can be
+   read/written by a single scsi command. The user can find the value of
+   PAGE_SIZE by calling getpagesize() defined in unistd.h . */
+
+#define SG_DEFAULT_RETRIES 1
+
+/* Defaults, commented if they differ from original sg driver */
+#define SG_DEF_FORCE_LOW_DMA 0  /* was 1 -> memory below 16MB on i386 */
+#define SG_DEF_FORCE_PACK_ID 0
+#define SG_DEF_KEEP_ORPHAN 0
+#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
+
+/* maximum outstanding requests, write() yields EDOM if exceeded */
+#define SG_MAX_QUEUE 16
+
+#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE    /* for backward compatibility */
+
+/* Alternate style type names, "..._t" variants preferred */
+typedef struct sg_io_hdr Sg_io_hdr;
+typedef struct sg_io_vec Sg_io_vec;
+typedef struct sg_scsi_id Sg_scsi_id;
+typedef struct sg_req_info Sg_req_info;
+
+
+/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
+/*   The older SG interface based on the 'sg_header' structure follows.   */
+/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
+
+#define SG_MAX_SENSE 16   /* this only applies to the sg_header interface */
 
 struct sg_header
  {
@@ -61,113 +241,31 @@ struct sg_header
    unsigned char sense_buffer[SG_MAX_SENSE];
  };
 
-/* Request information about a specific SG device.  */
-struct sg_scsi_id {
-  /* Host number as in "scsi<n>" where 'n' is one of 0, 1, 2 etc.  */
-  int host_no;
-  int channel;
-  /* SCSI id of target device.  */
-  int scsi_id;
-  int lun;
-  /* TYPE_... defined in <scsi/scsi.h>.  */
-  int scsi_type;
-  /* Host (adapter) maximum commands per lun.  */
-  short int h_cmd_per_lun;
-  /* Device (or adapter) maximum queue length.  */
-  short int d_queue_depth;
-  /* Unused, set to 0 for now.  */
-  int unused1;
-  /* Unused, set to 0 for now.  */
-  int unused2;
-};
 
-/* Ioctl's */
+/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
+	   interface is used. That are kept for backward compatibility with
+	   the original and version 2 drivers. */
+
 #define SG_SET_TIMEOUT		0x2201	/* Set timeout; *(int *)arg==timeout.  */
 #define SG_GET_TIMEOUT		0x2202	/* Get timeout; return timeout.  */
 
-#define SG_EMULATED_HOST	0x2203	/* True for emulated host adapter (ATAPI). */
-
-/* Used to configure SCSI command transformation layer for ATAPI devices.  */
-#define SG_SET_TRANSFORM	0x2204
-#define SG_GET_TRANSFORM	0x2205
-
-#define SG_SET_RESERVED_SIZE	0x2275  /* Request a new reserved buffer size.  */
-#define SG_GET_RESERVED_SIZE	0x2272  /* Get actual size of reserved buffer */
-
-/* The following ioctl takes a 'sg_scsi_id *' object as its 3rd argument. */
-#define SG_GET_SCSI_ID		0x2276	/* Yields fd's bus, chan, dev, lun + type
-					   SCSI id information can also be obtained
-					   from SCSI_IOCTL_GET_IDLUN. */
-
-/* Override host setting and always DMA using low memory ( <16MB on i386).  */
-#define SG_SET_FORCE_LOW_DMA	0x2279	/* 0-> use adapter setting, 1-> force  */
-#define SG_GET_LOW_DMA		0x227a	/* 0-> use all ram for dma; 1-> low dma ram */
-
-/* If SG_SET_FORCE_PACK_ID is set to 1, pack_id is input to read() which
-   will attempt to read that pack_id or block (or return EAGAIN).  If
-   pack_id is -1 then read oldest waiting.  If SG_SET_FORCE_PACK_ID is
-   set to 0 then pack_id gets ignored by read() and the oldest
-   readable is fetched.  */
-#define SG_SET_FORCE_PACK_ID	0x227b
-#define SG_GET_PACK_ID		0x227c	/* Yields oldest readable pack_id (or -1).  */
-
-#define SG_GET_NUM_WAITING	0x227d	/* Number of commands awaiting read().  */
-
-/* Turn on error sense trace (1..8), dump this device to log/console (9)
-   or dump all sg device states ( >9 ) to log/console.  */
-#define SG_SET_DEBUG		0x227e	/* 0 -> turn off debug */
-
-/* Yields max scatter gather tablesize allowed by current host adapter.  */
-#define SG_GET_SG_TABLESIZE	0x227F	/* 0 implies can't do scatter gather */
-
-/* Control whether sequencing per file descriptor or per device.  */
-#define SG_GET_MERGE_FD		0x2274	/* 0-> per fd, 1-> per device */
-#define SG_SET_MERGE_FD		0x2273	/* Attempt to change sequencing state,
-					   if more than current fd open on device,
-					   will fail with EBUSY.  */
-
 /* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q). */
 #define SG_GET_COMMAND_Q	0x2270	/* Yields 0 (queuing off) or 1 (on).  */
 #define SG_SET_COMMAND_Q 	0x2271	/* Change queuing state with 0 or 1.  */
 
-/* Get/set whether DMA underrun will cause an error (DID_ERROR).  Currently this
-   only applies to the [much-used] aic7xxx driver.  */
-#define SG_GET_UNDERRUN_FLAG	0x2280	/* Yields 0 (don't flag) or 1 (flag). */
-#define SG_SET_UNDERRUN_FLAG	0x2281	/* Change flag underrun state.  */
+/* Turn on error sense trace (1..8), dump this device to log/console (9)
+   or dump all sg device states ( >9 ) to log/console.  */
+#define SG_SET_DEBUG		0x227e	/* 0 -> turn off debug */
 
-#define SG_GET_VERSION_NUM	0x2282	/* Example: version 2.1.34 yields 20134 */
 #define SG_NEXT_CMD_LEN		0x2283	/* Override SCSI command length with given
 					   number on the next write() on this file
 					   descriptor.  */
 
-/* Returns -EBUSY if occupied else takes as input: 0 -> do nothing,
-   1 -> device reset or  2 -> bus reset (may not be activated yet).  */
-#define SG_SCSI_RESET		0x2284
-
-
-/* Largest size (in bytes) a single scatter-gather list element can have.
-   The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on 
-   i386].  The minimum value is PAGE_SIZE.  If scatter-gather not supported
-   by adapter then this value is the largest data block that can be
-   read/written by a single scsi command.  The user can find the value of
-   PAGE_SIZE by calling getpagesize() defined in <unistd.h>.  */
-#define SG_SCATTER_SZ 		(8 * 4096) /* PAGE_SIZE is not available to user.  */
-
-#define SG_DEFAULT_TIMEOUT	(60 * HZ) /* 1 minute timeout */
-#define SG_DEFAULT_RETRIES	1
-
 /* Defaults, commented if they differ from original sg driver */
-#define SG_DEF_COMMAND_Q 	0
-#define SG_DEF_MERGE_FD		0	/* was 1 -> per device sequencing */
-#define SG_DEF_FORCE_LOW_DMA	0	/* was 1 -> memory below 16MB on i386 */
-#define SG_DEF_FORCE_PACK_ID	0
-#define SG_DEF_UNDERRUN_FLAG	0
-#define SG_DEF_RESERVED_SIZE	SG_SCATTER_SZ
-
-#define SG_MAX_QUEUE 		16	/* Maximum outstanding request, arbitrary,
-					   may be changed if sufficient DMA buffer
-					   room available.  */
-
-#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE  /* for backward compatibility */
+#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */
+#define SG_DEF_COMMAND_Q 0     /* command queuing is always on when
+				  the new interface is used */
+#define SG_DEF_UNDERRUN_FLAG 0
+
 
 #endif	/* scsi/sg.h */