gconv: Correct Big5-HKSCS conversion to preserve all state bits. [BZ #25744]

This patch corrects the Big5-HKSCS converter to preserve the lowest 3 bits of
the mbstate_t __count data member when the converter encounters an incomplete
multibyte character.

This fixes BZ #25744.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>

2 files changed, 73 insertions, 8 deletions

diff --git a/iconvdata/big5hkscs.c b/iconvdata/big5hkscs.c
index a28b18a..d12389b 100644
--- a/iconvdata/big5hkscs.c
+++ b/iconvdata/big5hkscs.c
@@ -17769,7 +17769,7 @@ static struct
    the output state to the initial state.  This has to be done during the
    flushing.  */
 #define EMIT_SHIFT_TO_INIT \
-  if (data->__statep->__count != 0)					      \
+  if ((data->__statep->__count >> 3) != 0)				      \
     {									      \
       if (FROM_DIRECTION)						      \
 	{								      \
@@ -17778,7 +17778,7 @@ static struct
 	      /* Write out the last character.  */			      \
 	      *((uint32_t *) outbuf) = data->__statep->__count >> 3;	      \
 	      outbuf += sizeof (uint32_t);				      \
-	      data->__statep->__count = 0;				      \
+	      data->__statep->__count &= 7;				      \
 	    }								      \
 	  else								      \
 	    /* We don't have enough room in the output buffer.  */	      \
@@ -17792,7 +17792,7 @@ static struct
 	      uint32_t lasttwo = data->__statep->__count >> 3;		      \
 	      *outbuf++ = (lasttwo >> 8) & 0xff;			      \
 	      *outbuf++ = lasttwo & 0xff;				      \
-	      data->__statep->__count = 0;				      \
+	      data->__statep->__count &= 7;				      \
 	    }								      \
 	  else								      \
 	    /* We don't have enough room in the output buffer.  */	      \
@@ -17878,7 +17878,7 @@ static struct
 									      \
 		/* Otherwise store only the first character now, and	      \
 		   put the second one into the queue.  */		      \
-		*statep = ch2 << 3;					      \
+		*statep = (ch2 << 3) | (*statep & 7);			      \
 		/* Tell the caller why we terminate the loop.  */	      \
 		result = __GCONV_FULL_OUTPUT;				      \
 		break;							      \
@@ -17895,7 +17895,7 @@ static struct
       }									      \
     else								      \
       /* Clear the queue and proceed to output the saved character.  */	      \
-      *statep = 0;							      \
+      *statep &= 7;							      \
 									      \
     put32 (outptr, ch);							      \
     outptr += 4;							      \
@@ -17946,7 +17946,7 @@ static struct
 	  }								      \
 	*outptr++ = (ch >> 8) & 0xff;					      \
 	*outptr++ = ch & 0xff;						      \
-	*statep = 0;							      \
+	*statep &= 7;							      \
 	inptr += 4;							      \
 	continue;							      \
 									      \
@@ -17959,7 +17959,7 @@ static struct
 	  }								      \
 	*outptr++ = (lasttwo >> 8) & 0xff;				      \
 	*outptr++ = lasttwo & 0xff;					      \
-	*statep = 0;							      \
+	*statep &= 7;							      \
 	continue;							      \
       }									      \
 									      \
@@ -17996,7 +17996,7 @@ static struct
 	   /* Check for possible combining character.  */		      \
 	    if (__glibc_unlikely (ch == 0xca || ch == 0xea))		      \
 	      {								      \
-		*statep = ((cp[0] << 8) | cp[1]) << 3;			      \
+		*statep = (((cp[0] << 8) | cp[1]) << 3) | (*statep & 7);      \
 		inptr += 4;						      \
 		continue;						      \
 	      }								      \
diff --git a/iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c b/iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c
index 9601b6c..e1472dc 100644
--- a/iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c
+++ b/iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c
@@ -128,6 +128,71 @@ check_conversion (struct testdata test)
       printf ("error: Result of third conversion was wrong.\n");
       err++;
     }
+
+  /* Now perform the same test as above consuming one byte at a time.  */
+  mbs = test.input;
+  memset (&st, 0, sizeof (st));
+
+  /* Consume the first byte; expect an incomplete multibyte character.  */
+  ret = mbrtowc (&wc, mbs, 1, &st);
+  if (ret != -2)
+    {
+      printf ("error: First byte conversion returned %zd.\n", ret);
+      err++;
+    }
+  /* Advance past the first consumed byte.  */
+  mbs += 1;
+  /* Consume the second byte; expect the first wchar_t.  */
+  ret = mbrtowc (&wc, mbs, 1, &st);
+  if (ret != 1)
+    {
+      printf ("error: Second byte conversion returned %zd.\n", ret);
+      err++;
+    }
+  /* Advance past the second consumed byte.  */
+  mbs += 1;
+  if (wc != test.expected[0])
+    {
+      printf ("error: Result of first wchar_t conversion was wrong.\n");
+      err++;
+    }
+  /* Consume no bytes; expect the second wchar_t.  */
+  ret = mbrtowc (&wc, mbs, 1, &st);
+  if (ret != 0)
+    {
+      printf ("error: First attempt of third byte conversion returned %zd.\n", ret);
+      err++;
+    }
+  /* Do not advance past the third byte.  */
+  mbs += 0;
+  if (wc != test.expected[1])
+    {
+      printf ("error: Result of second wchar_t conversion was wrong.\n");
+      err++;
+    }
+  /* After the second wchar_t conversion, the converter should be in
+     the initial state since the two input BIG5-HKSCS bytes have been
+     consumed and the two wchar_t's have been output.  */
+  if (mbsinit (&st) == 0)
+    {
+      printf ("error: Converter not in initial state.\n");
+      err++;
+    }
+  /* Consume the third byte; expect the third wchar_t.  */
+  ret = mbrtowc (&wc, mbs, 1, &st);
+  if (ret != 1)
+    {
+      printf ("error: Third byte conversion returned %zd.\n", ret);
+      err++;
+    }
+  /* Advance past the third consumed byte.  */
+  mbs += 1;
+  if (wc != test.expected[2])
+    {
+      printf ("error: Result of third wchar_t conversion was wrong.\n");
+      err++;
+    }
+
   /* Return 0 if we saw no errors.  */
   return err;
 }