path: root/sim/ppc/configure

#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.4 
# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --enable-sim-cflags=opts		Extra CFLAGS for use in building simulator"
ac_help="$ac_help
  --enable-sim-warnings=opts		Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o"
ac_help="$ac_help
  --enable-sim-config=file		Override default config file"
ac_help="$ac_help
  --enable-sim-opcode=which		Override default opcode lookup."
ac_help="$ac_help
  --enable-sim-switch			Use a switch instead of a table for instruction call."
ac_help="$ac_help
  --enable-sim-duplicate		Expand (duplicate) semantic functions."
ac_help="$ac_help
  --enable-sim-filter=rule		Specify filter rules."
ac_help="$ac_help
  --enable-sim-icache=size		Specify instruction cache size."
ac_help="$ac_help
  --enable-sim-inline=inlines		Specify which functions should be inlined."
ac_help="$ac_help
  --enable-sim-bswap			Use the BSWAP instruction on Intel 486s and Pentiums."
ac_help="$ac_help
  --enable-sim-endian=endian		Specify target byte endian orientation."
ac_help="$ac_help
  --enable-sim-hostendain=end		Specify host byte endian orientation."
ac_help="$ac_help
  --enable-sim-smp=n			Specify number of processors to configure for."
ac_help="$ac_help
  --enable-sim-xor-endian=n		Specify number bytes involved in PowerPC XOR bi-endian mode (default 8)."
ac_help="$ac_help
  --enable-sim-bitsize=n		Specify target bitsize (32 or 64)."
ac_help="$ac_help
  --enable-sim-hostbitsize=32|64	Specify host bitsize (32 or 64)."
ac_help="$ac_help
  --enable-sim-env=env			Specify target environment (operating, virtual, user)."
ac_help="$ac_help
  --enable-sim-timebase			Specify whether the PPC timebase is supported."
ac_help="$ac_help
  --enable-sim-alignment=align		Specify strict or nonstrict alignment."
ac_help="$ac_help
  --enable-sim-trace			Specify whether tracing is supported."
ac_help="$ac_help
  --enable-sim-assert			Specify whether to perform random assertions."
ac_help="$ac_help
  --enable-sim-reserved-bits		Specify whether to check reserved bits in instruction."
ac_help="$ac_help
  --enable-sim-float			Specify whether to use host floating point or simulate."
ac_help="$ac_help
  --enable-sim-monitor=mon		Specify whether to enable monitoring events."
ac_help="$ac_help
  --enable-sim-model=which		Specify PowerPC to model."
ac_help="$ac_help
  --enable-sim-default-model=which	Specify default PowerPC to model."
ac_help="$ac_help
  --enable-sim-model-issue		Specify whether to simulate model specific actions"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE

# Initialize some other variables.
subdirs=

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -build | --build | --buil | --bui | --bu | --b)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=* | --b=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=PREFIX    install architecture-dependent files in PREFIX
                          [same as prefix]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM run sed PROGRAM on installed program names
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
--enable and --with options recognized:$ac_help
EOF
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.4"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *) 
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=Makefile.in

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5'

if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi



# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
enableval="$enable_sim_cflags"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_cflags="-O2 -fomit-frame-pointer";;
  no)	sim_cflags="";;
  *)	sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
  echo "Setting sim cflags = $sim_cflags" 6>&1
fi
else
  sim_cflags=""
fi

# Check whether --enable-sim-warnings or --disable-sim-warnings was given.
enableval="$enable_sim_warnings"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes";;
  no)	sim_warnings="-w";;
  *)	sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
  echo "Setting warning flags = $sim_warnings" 6>&1
fi
else
  sim_warnings=""
fi

# Check whether --enable-sim-config or --disable-sim-config was given.
enableval="$enable_sim_config"
if test -n "$enableval"; then
  case "${enableval}" in
  yes|no)	{ echo "configure: error: "No value supplied for --enable-sim-config=file"" 1>&2; exit 1; };;
  *)		if test -f "${srcdir}/${enableval}"; then
		  sim_config="${enableval}";
		elif test -f "${srcdir}/${enableval}-config.h"; then
		  sim_config="${enableval}-config.h"
		else
		  { echo "configure: error: "Config file $enableval was not found"" 1>&2; exit 1; };
		  sim_config=std-config.h
		fi;;
esac
if test x"$silent" != x"yes" && test x"$sim_config" != x""; then
  echo "Setting config flags = $sim_config" 6>&1
fi
else
  sim_config="std-config.h"
if test x"$silent" != x"yes"; then
  echo "Setting config flags = $sim_config" 6>&1
fi
fi

# Check whether --enable-sim-opcode or --disable-sim-opcode was given.
enableval="$enable_sim_opcode"
if test -n "$enableval"; then
  case "${enableval}" in
  yes|no)	{ echo "configure: error: "No value supplied for --enable-sim-opcode=file"" 1>&2; exit 1; };;
  *)		if test -f "${srcdir}/${enableval}"; then
		  sim_opcode="${enableval}"
		elif test -f "${srcdir}/ppc-opcode-${enableval}"; then
		  sim_opcode="ppc-opcode-${enableval}"
		else
		  { echo "configure: error: "File $enableval is not an opcode rules file"" 1>&2; exit 1; };
		  sim_opcode="ppc-opcode-complex"
		fi;;
esac
if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then
  echo "Setting opcode flags = $sim_opcode" 6>&1
fi
else
  sim_opcode="ppc-opcode-complex"
if test x"$silent" != x"yes"; then
  echo "Setting opcode flags = $sim_opcode"
fi
fi

# Check whether --enable-sim-switch or --disable-sim-switch was given.
enableval="$enable_sim_switch"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_switch="-s";;
  no)	sim_switch="";;
  *)	{ echo "configure: error: "--enable-sim-switch does not take a value"" 1>&2; exit 1; }; sim_switch="";;
esac
if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then
  echo "Setting switch flags = $sim_switch" 6>&1
fi
else
  sim_switch="-s";
if test x"$silent" != x"yes"; then
  echo "Setting switch flags = $sim_switch" 6>&1
fi
fi

# Check whether --enable-sim-duplicate or --disable-sim-duplicate was given.
enableval="$enable_sim_duplicate"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_dup="-e";;
  no)	sim_dup="";;
  *)	{ echo "configure: error: "--enable-sim-duplicate does not take a value"" 1>&2; exit 1; }; sim_dup="";;
esac
if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then
  echo "Setting duplicate flags = $sim_dup" 6>&1
fi
else
  sim_dup="-e"
if test x"$silent" != x"yes"; then
  echo "Setting duplicate flags = $sim_dup" 6>&1
fi
fi

# Check whether --enable-sim-filter or --disable-sim-filter was given.
enableval="$enable_sim_filter"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	{ echo "configure: error: "--enable-sim-filter must be specified with a rule to filter or no"" 1>&2; exit 1; }; sim_filter="";;
  no)	sim_filter="";;
  *)	sim_filter="-f $enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_filter" != x""; then
  echo "Setting filter flags = $sim_filter" 6>&1
fi
else
  sim_filter="-f 64"
if test x"$silent" != x"yes"; then
  echo "Setting filter flags = $sim_filter" 6>&1
fi
fi

# Check whether --enable-sim-icache or --disable-sim-icache was given.
enableval="$enable_sim_icache"
if test -n "$enableval"; then
  icache=""
case "${enableval}" in
  yes)		sim_icache="-r 1024"; icache="1024";;
  define)	sim_icache="-r 1024 -R"; icache="1024";;
  no)		sim_icache="";;
  *)		sim_icache="-r ${enableval}"; icache="${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$icache" != x""; then
  echo "Setting instruction cache size to $icache"
fi
else
  sim_icache="-r 1024"
if test x"$silent" != x"yes"; then
  echo "Setting instruction cache size to 1024"
fi
fi

# Check whether --enable-sim-inline or --disable-sim-inline was given.
enableval="$enable_sim_inline"
if test -n "$enableval"; then
  sim_inline=""
case "$enableval" in
  no)		sim_inline="-DDEFAULT_INLINE=0 -DINLINE=";;
  0)		sim_inline="-DDEFAULT_INLINE=0";;
  yes | 2)	sim_inline="-DDEFAULT_INLINE=2";;
  1)		sim_inline="-DDEFAULT_INLINE=1";;
  *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
       new_flag=""
       case "$x" in
	 *_INLINE=*)	new_flag="-D$x";;
	 *_INLINE)	new_flag="-D$x=2";;
	 *=*)		new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
	 *)		new_flag="-D$x""_INLINE=2";;
       esac
       if test x"$sim_inline" = x""; then
	 sim_inline="$new_flag"
       else
	 sim_inline="$sim_inline $new_flag"
       fi
     done;;
esac
if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
  echo "Setting inline flags = $sim_inline" 6>&1
fi
else
  if test x"$GCC" != ""; then
  sim_inline="-DDEFAULT_INLINE=1"
  if test x"$silent" != x"yes"; then
    echo "Setting inline flags = $sim_inline" 6>&1
  fi
else
  sim_inline=""
fi
fi

# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
enableval="$enable_sim_bswap"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_bswap="-DWITH_BSWAP=1";;
  no)	sim_bswap="-DWITH_BSWAP=0";;
  *)	{ echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
  echo "Setting bswap flags = $sim_bswap" 6>&1
fi
else
  sim_bswap=""
fi

# Check whether --enable-sim-endian or --disable-sim-endian was given.
enableval="$enable_sim_endian"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	case "$target" in
	  *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
	  *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
	  *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
	esac;;
  no)	 sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
  b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
  l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
  echo "Setting endian flags = $sim_endian" 6>&1
fi
else
  sim_endian=""
fi

# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
enableval="$enable_sim_hostendian"
if test -n "$enableval"; then
  case "${enableval}" in
  no)	 sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
  b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
  l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
  echo "Setting hostendian flags = $sim_hostendian" 6>&1
fi
else
  sim_hostendian=""
fi

# Check whether --enable-sim-smp or --disable-sim-smp was given.
enableval="$enable_sim_smp"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_smp="-DWITH_SMP=5";;
  no)	sim_smp="-DWITH_SMP=0";;
  *)	sim_smp="-DWITH_SMP=$enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
  echo "Setting smp flags = $sim_smp" 6>&1
fi
else
  sim_smp="-DWITH_SMP=0"
if test x"$silent" != x"yes"; then
  echo "Setting smp flags = $sim_smp" 6>&1
fi
fi

# Check whether --enable-sim-xor-endian or --disable-sim-xor-endian was given.
enableval="$enable_sim_xor_endian"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
  no)	sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
  *)	sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
esac
else
  sim_xor_endian=""
fi

# Check whether --enable-sim-bitsize or --disable-sim-bitsize was given.
enableval="$enable_sim_bitsize"
if test -n "$enableval"; then
  case "${enableval}" in
  32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";;
  *)	 { echo "configure: error: "--enable-sim-bitsize was given $enableval" 1>&2; exit 1; }; sim_bitsize="";;
esac
if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
  echo "Setting bitsize flags = $sim_bitsize" 6>&1
fi
else
  sim_bitsize=""
fi

# Check whether --enable-sim-hostbitsize or --disable-sim-hostbitsize was given.
enableval="$enable_sim_hostbitsize"
if test -n "$enableval"; then
  case "${enableval}" in
  32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";;
  *)	 { echo "configure: error: "--enable-sim-hostbitsize was given $enableval" 1>&2; exit 1; }; sim_hostbitsize="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then
  echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1
fi
else
  sim_hostbitsize=""
fi

# Check whether --enable-sim-env or --disable-sim-env was given.
enableval="$enable_sim_env"
if test -n "$enableval"; then
  case "${enableval}" in
  operating | os | oea)	sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
  virtual | vea)	sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
  user | uea)		sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
  no)			sim_env="-DWITH_ENVIRONMENT=0";;
  *)			{ echo "configure: error: "Unknown value $enableval passed to --enable-sim-env"" 1>&2; exit 1; }; sim_env="";;
esac
if test x"$silent" != x"yes" && test x"$sim_env" != x""; then
  echo "Setting env flags = $sim_env" 6>&1
fi
else
  sim_env=""
fi

# Check whether --enable-sim-timebase or --disable-sim-timebase was given.
enableval="$enable_sim_timebase"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_timebase="-DWITH_TIME_BASE=1";;
  no)	sim_timebase="-DWITH_TIME_BASE=0";;
  *)	{ echo "configure: error: "--enable-sim-timebase does not take a value"" 1>&2; exit 1; }; sim_timebase="";;
esac
if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then
  echo "Setting timebase flags = $sim_timebase" 6>&1
fi
else
  sim_timebase=""
fi

# Check whether --enable-sim-alignment or --disable-sim-alignment was given.
enableval="$enable_sim_alignment"
if test -n "$enableval"; then
  case "${enableval}" in
  yes | strict | STRICT)	sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
  no | nonstrict | NONSTRICT)	sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
  *)				{ echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";;
esac
if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
  echo "Setting alignment flags = $sim_alignment" 6>&1
fi
else
  sim_alignment=""
fi

# Check whether --enable-sim-trace or --disable-sim-trace was given.
enableval="$enable_sim_trace"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_trace="-DWITH_TRACE=1";;
  no)	sim_trace="-DWITH_TRACE=0";;
  *)	{ echo "configure: error: "--enable-sim-trace does not take a value"" 1>&2; exit 1; }; sim_trace="";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
  echo "Setting trace flags = $sim_trace" 6>&1
fi
else
  sim_trace=""
fi

# Check whether --enable-sim-assert or --disable-sim-assert was given.
enableval="$enable_sim_assert"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_assert="-DWITH_ASSERT=1";;
  no)	sim_assert="-DWITH_ASSERT=0";;
  *)	{ echo "configure: error: "--enable-sim-assert does not take a value"" 1>&2; exit 1; }; sim_assert="";;
esac
if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
  echo "Setting assert flags = $sim_assert" 6>&1
fi
else
  sim_assert=""
fi

# Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given.
enableval="$enable_sim_reserved_bits"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_reserved="-DWITH_RESERVED_BITS=1";;
  no)	sim_reserved="-DWITH_RESERVED_BITS=0";;
  *)	{ echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved="";;
esac
if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then
  echo "Setting reserved flags = $sim_reserved" 6>&1
fi
else
  sim_reserved=""
fi

# Check whether --enable-sim-float or --disable-sim-float was given.
enableval="$enable_sim_float"
if test -n "$enableval"; then
  case "${enableval}" in
  yes | hard)	sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
  no | soft)	sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
  *)		{ echo "configure: error: "Unknown value $enableval passed to --enable-sim-float"" 1>&2; exit 1; }; sim_float="";;
esac
if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
  echo "Setting float flags = $sim_float" 6>&1
fi
else
  sim_float=""
fi

# Check whether --enable-sim-monitor or --disable-sim-monitor was given.
enableval="$enable_sim_monitor"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)		sim_mon="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";;
  no)		sim_mon="-DWITH_MON=0";;
  instruction)	sim_mon="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";;
  memory)	sim_mon="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";;
  *)		{ echo "configure: error: "Unknown value $enableval passed to --enable-sim-mon"" 1>&2; exit 1; }; sim_env="";;
esac
if test x"$silent" != x"yes" && test x"$sim_mon" != x""; then
  echo "Setting monitor flags = $sim_mon" 6>&1
fi
else
  sim_mon=""
fi

# Check whether --enable-sim-model or --disable-sim-model was given.
enableval="$enable_sim_model"
if test -n "$enableval"; then
  case "${enableval}" in
  yes|no)	{ echo "configure: error: "No value supplied for --enable-sim-model=model"" 1>&2; exit 1; };;
  *)		sim_model="-DWITH_MODEL=${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$sim_model" != x""; then
  echo "Setting model flags = $sim_model" 6>&1
fi
else
  sim_model=""
fi

# Check whether --enable-sim-default-model or --disable-sim-default-model was given.
enableval="$enable_sim_default_model"
if test -n "$enableval"; then
  case "${enableval}" in
  yes|no)	{ echo "configure: error: "No value supplied for --enable-sim-default-model=model"" 1>&2; exit 1; };;
  *)		sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
  echo "Setting default-model flags = $sim_default_model" 6>&1
fi
else
  sim_model=""
fi

# Check whether --enable-sim-model-issue or --disable-sim-model-issue was given.
enableval="$enable_sim_model_issue"
if test -n "$enableval"; then
  case "${enableval}" in
  yes)	sim_model_issue="-DWITH_MODEL_ISSUE=1";;
  no)	sim_model_issue="-DWITH_MODEL_ISSUE=0";;
  *)	{ echo "configure: error: "--enable-sim-model-issue does not take a value"" 1>&2; exit 1; }; sim_model_issue="";;
esac
if test x"$silent" != x"yes"; then
  echo "Setting model-issue flags = $sim_model_issue" 6>&1
fi
else
  sim_model_issue=""
fi

ac_aux_dir=
for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.


# Do some error checking and defaulting for the host and target type.
# The inputs are:
#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
#    same time. 
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
#    as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.

# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac


# Make sure we can run config.sub.
if $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`$ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`$ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking target system type""... $ac_c" 1>&6

target_alias=$target
case "$target_alias" in
NONE)
  case $nonopt in
  NONE) target_alias=$host_alias ;;
  *) target_alias=$nonopt ;;
  esac ;;
esac

target=`$ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`$ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

test "$host_alias" != "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-

if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.
  echo 's,\\,\\\\,g; s,\$,$$,g' > conftestsed
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"


. ${srcdir}/../../bfd/configure.host



# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_CC" && ac_cv_prog_CC="cc"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if ${CC-cc} -E conftest.c 2>&5 | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
  GCC=yes
  if test "${CFLAGS+set}" != set; then
    echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_gcc_g=yes
else
  ac_cv_prog_gcc_g=no
fi
rm -f conftest*

fi
    echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
    if test $ac_cv_prog_gcc_g = yes; then
      CFLAGS="-g -O"
    else
      CFLAGS="-O"
    fi
  fi
else
  GCC=
  test "${CFLAGS+set}" = set || CFLAGS="-g"
fi



AR=${AR-ar}

# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi





























for ac_func in getrusage
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1191 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
char $ac_func(); 

int main() { return 0; }
int t() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if eval $ac_link; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*

fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr '[a-z]' '[A-Z]'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


# Put a plausible default for CC_FOR_BUILD in Makefile.
# If we cannot run a trivial program, we must be cross compiling.
echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_c_cross=yes
else
cat > conftest.$ac_ext <<EOF
#line 1246 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
eval $ac_link
if test -s conftest && (./conftest; exit) 2>/dev/null; then
  ac_cv_c_cross=no
else
  ac_cv_c_cross=yes
fi
fi
rm -fr conftest*
fi
cross_compiling=$ac_cv_c_cross
echo "$ac_t""$ac_cv_c_cross" 1>&6

if test "x$cross_compiling" = "xno"; then
  CC_FOR_BUILD='$(CC)'
else
  CC_FOR_BUILD=gcc
fi


echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1284 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1298 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

for ac_hdr in string.h strings.h stdlib.h time.h sys/types.h sys/time.h sys/times.h unistd.h sys/resource.h
do
ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1331 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | tr '[a-z]./\055' '[A-Z]___'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
  >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.4"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir

trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15

# Protect against being on the right side of a sed subst in config.status. 
sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\\\&%]/\\\\&/g; 
 s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
$ac_vpsub
$extrasub
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@HDEFINES@%$HDEFINES%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
s%@sim_cflags@%$sim_cflags%g
s%@sim_warnings@%$sim_warnings%g
s%@sim_config@%$sim_config%g
s%@sim_opcode@%$sim_opcode%g
s%@sim_switch@%$sim_switch%g
s%@sim_dup@%$sim_dup%g
s%@sim_filter@%$sim_filter%g
s%@sim_icache@%$sim_icache%g
s%@sim_inline@%$sim_inline%g
s%@sim_bswap@%$sim_bswap%g
s%@sim_endian@%$sim_endian%g
s%@sim_xor_endian@%$sim_xor_endian%g
s%@sim_hostendian@%$sim_hostendian%g
s%@sim_smp@%$sim_smp%g
s%@sim_bitsize@%$sim_bitsize%g
s%@sim_hostbitsize@%$sim_hostbitsize%g
s%@sim_env@%$sim_env%g
s%@sim_timebase@%$sim_timebase%g
s%@sim_alignment@%$sim_alignment%g
s%@sim_float@%$sim_float%g
s%@sim_trace@%$sim_trace%g
s%@sim_assert@%$sim_assert%g
s%@sim_reserved@%$sim_reserved%g
s%@sim_monitor@%$sim_monitor%g
s%@sim_model@%$sim_model%g
s%@sim_default_model@%$sim_default_model%g
s%@sim_model_issue@%$sim_model_issue%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@CPP@%$CPP%g

CEOF
EOF
cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust relative srcdir, etc. for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
rm -f conftest.subs

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  cp $ac_given_srcdir/$ac_file_in conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status. 
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
# Maximum number of lines to put in a single here document.
ac_max_here_lines=12

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done


case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1