path: root/gdb/testsuite/gdb.base/step-over-syscall.exp

# This testcase is part of GDB, the GNU debugger.

# Copyright 2011-2016 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

set syscall_insn ""

# Define the syscall instruction for each target.

if { [istarget "i\[34567\]86-*-linux*"] || [istarget "x86_64-*-linux*"] } {
    set syscall_insn "\[ \t\](int|syscall|sysenter)\[ \t\]"
} elseif { [istarget "aarch64*-*-linux*"] || [istarget "arm*-*-linux*"] } {
    set syscall_insn "\[ \t\](swi|svc)\[ \t\]"
} else {
    return -1
}

proc check_pc_after_cross_syscall { syscall syscall_insn_next_addr } {
    set syscall_insn_next_addr_found [get_hexadecimal_valueof "\$pc" "0"]

    set test "single step over $syscall final pc"
    if {$syscall_insn_next_addr != 0
	&& $syscall_insn_next_addr == $syscall_insn_next_addr_found} {
	pass $test
    } else {
	fail $test
    }
}

# Restart GDB and set up the test.  Return a list in which the first one
# is the address of syscall instruction and the second one is the address
# of the next instruction address of syscall instruction.  If anything
# wrong, the two elements of list are -1.

proc setup { syscall } {
    global gdb_prompt syscall_insn

    set testfile "step-over-$syscall"

    clean_restart $testfile

    if { ![runto main] } then {
	fail "run to main ($syscall)"
	return -1
    }

    # Delete the breakpoint on main.
    gdb_test_no_output "delete break 1"

    gdb_test_no_output "set displaced-stepping off"

    gdb_test "break $syscall" "Breakpoint \[0-9\]* at .*"

    gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, (.* in |__libc_|)$syscall \\(\\).*" \
	"continue to $syscall (1st time)"
    # Hit the breakpoint on $syscall for the first time.  In this time,
    # we will let PLT resolution done, and the number single steps we will
    # do later will be reduced.

    gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, (.* in |__libc_|)$syscall \\(\\).*" \
	"continue to $syscall (2nd time)"
    # Hit the breakpoint on $syscall for the second time.  In this time,
    # the address of syscall insn and next insn of syscall are recorded.

    gdb_test "display/i \$pc" ".*"

    # Single step until we see a syscall insn or we reach the
    # upper bound of loop iterations.
    set msg "find syscall insn in $syscall"
    set steps 0
    set max_steps 1000
    gdb_test_multiple "stepi" $msg {
	-re ".*$syscall_insn.*$gdb_prompt $" {
	    pass $msg
	}
	-re "x/i .*=>.*\r\n$gdb_prompt $" {
	    incr steps
	    if {$steps == $max_steps} {
		fail $msg
	    } else {
		send_gdb "stepi\n"
		exp_continue
	    }
	}
    }

    if {$steps == $max_steps} {
	return { -1, -1 }
    }

    set syscall_insn_addr [get_hexadecimal_valueof "\$pc" "0"]
    if {[gdb_test "stepi" "x/i .*=>.*" "stepi $syscall insn"] != 0} {
	return { -1, -1 }
    }
    return [list $syscall_insn_addr [get_hexadecimal_valueof "\$pc" "0"]]
}

proc step_over_syscall { syscall } {
    with_test_prefix "$syscall" {
	global syscall_insn
	global gdb_prompt

	set testfile "step-over-$syscall"

	if [build_executable ${testfile}.exp ${testfile} ${testfile}.c {debug}] {
	    untested "failed to compile"
	    return -1
	}

	foreach_with_prefix displaced {"off" "on"} {
	    if {$displaced == "on" && ![support_displaced_stepping]} {
		continue
	    }

	    if { $displaced == "on" && $syscall == "clone" } {
		# GDB doesn't support stepping over clone syscall with
		# displaced stepping.
		kfail "gdb/19675" "single step over clone"
		continue
	    }

	    set ret [setup $syscall]

	    set syscall_insn_addr [lindex $ret 0]
	    set syscall_insn_next_addr [lindex $ret 1]
	    if { $syscall_insn_addr == -1 } {
		return -1
	    }

	    gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, (.* in |__libc_|)$syscall \\(\\).*" \
		"continue to $syscall (3rd time)"

	    # Hit the breakpoint on $syscall for the third time.  In this time, we'll set
	    # breakpoint on the syscall insn we recorded previously, and single step over it.

	    set syscall_insn_bp 0
	    gdb_test_multiple "break \*$syscall_insn_addr"  "break on syscall insn" {
		-re "Breakpoint (\[0-9\]*) at .*$gdb_prompt $" {
		    set syscall_insn_bp $expect_out(1,string)
		    pass "break on syscall insns"
		}
	    }

	    gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, .*" \
		"continue to syscall insn $syscall"

	    gdb_test_no_output "set displaced-stepping $displaced"

	    # Check the address of next instruction of syscall.
	    if {[gdb_test "stepi" "x/i .*=>.*" "single step over $syscall"] != 0} {
		return -1
	    }
	    check_pc_after_cross_syscall $syscall $syscall_insn_next_addr

	    # Delete breakpoint syscall insns to avoid interference to other syscalls.
	    delete_breakpoints

	    gdb_test "break marker" "Breakpoint.*at.* file .*${testfile}.c, line.*"
	    gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, marker \\(\\) at.*" \
		"continue to marker ($syscall)"
	}
    }
}

# Set a breakpoint with a condition that evals false on syscall
# instruction.  In fact, it tests GDBserver steps over syscall
# instruction.  SYSCALL is the syscall the program calls.
# FOLLOW_FORK is either "parent" or "child".  DETACH_ON_FORK is
# "on" or "off".

proc break_cond_on_syscall { syscall follow_fork detach_on_fork } {
    with_test_prefix "break cond on target : $syscall" {
	set testfile "step-over-$syscall"

	set ret [setup $syscall]

	set syscall_insn_addr [lindex $ret 0]
	set syscall_insn_next_addr [lindex $ret 1]
	if { $syscall_insn_addr == -1 } {
	    return -1
	}

	gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, (.* in |__libc_|)$syscall \\(\\).*" \
	    "continue to $syscall"
	# Delete breakpoint syscall insns to avoid interference with other syscalls.
	delete_breakpoints

	gdb_test "set follow-fork-mode $follow_fork"
	gdb_test "set detach-on-fork $detach_on_fork"

	# Create a breakpoint with a condition that evals false.
	gdb_test "break \*$syscall_insn_addr if main == 0" \
	    "Breakpoint \[0-9\]* at .*"

	if { $syscall == "clone" } {
	    # Create a breakpoint in the child with the condition that
	    # evals false, so that GDBserver can get the event from the
	    # child but GDB doesn't see it.  In this way, we don't have
	    # to adjust the test flow for "clone".
	    # This is a regression test for PR server/19736.  In this way,
	    # we can test that GDBserver gets an event from the child and
	    # set suspend count correctly while the parent is stepping over
	    # the breakpoint.
	    gdb_test "break clone_fn if main == 0"
	}

	if { $syscall == "clone" } {
	    # follow-fork and detach-on-fork only make sense to
	    # fork and vfork.
	    gdb_test "break marker" "Breakpoint.*at.* file .*${testfile}.c, line.*"
	    gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, marker \\(\\) at.*" \
		"continue to marker"
	} else {
	    if { $follow_fork == "child" } {
		gdb_test "continue" "exited normally.*" "continue to end of inf 2"
		if { $detach_on_fork == "off" } {
		    gdb_test "inferior 1"
		    gdb_test "break marker" "Breakpoint.*at.*"
		    gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, marker \\(\\) at.*" \
			"continue to marker"
		}
	    } else {
		gdb_test "break marker" "Breakpoint.*at.* file .*${testfile}.c, line.*"
		gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, marker \\(\\) at.*" \
		    "continue to marker"
	    }
	}
    }
}

step_over_syscall "fork"
step_over_syscall "vfork"
step_over_syscall "clone"

set testfile "step-over-fork"
clean_restart $testfile
if { ![runto main] } then {
    fail "run to main"
    return -1
}

set cond_bp_target 1

set test "set breakpoint condition-evaluation target"
gdb_test_multiple $test $test {
    -re "warning: Target does not support breakpoint condition evaluation.\r\nUsing host evaluation mode instead.\r\n$gdb_prompt $" {
	# Target doesn't support breakpoint condition
	# evaluation on its side.
	set cond_bp_target 0
    }
    -re "^$test\r\n$gdb_prompt $" {
    }
}

if { $cond_bp_target } {

    foreach_with_prefix detach-on-fork {"on" "off"} {
	foreach_with_prefix follow-fork {"parent" "child"} {
	    foreach syscall { "fork" "vfork" "clone" } {

		if { $syscall == "vfork"
		     && ${follow-fork} == "parent"
		     && ${detach-on-fork} == "off" } {
		    # Both vforked child process and parent process are
		    # under GDB's control, but GDB follows the parent
		    # process only, which can't be run until vforked child
		    # finishes.  Skip the test in this scenario.
		    continue
		}
		break_cond_on_syscall $syscall ${follow-fork} ${detach-on-fork}
	    }
	}
    }
}