path: root/gdb/testsuite/gdb.base/default.exp

#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997, 1998
#   Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

# Start with a fresh gdb

gdb_exit
gdb_start

set timeout 60

#
# test default actions of gdb commands
#

#load_lib gdb.exp

gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"

setup_xfail "mips-idt-*"
send_gdb "attach\n"
gdb_expect {
    -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
			{ pass "attach" }
    -re "You can't do that when your target is `None'.*$gdb_prompt $"\
			{ pass "attach" }
    -re "You can't do that without a process to debug.*$gdb_prompt $"\
			{ pass "attach" }
    -re "Don't know how to attach.  Try \"help target\"..*$gdb_prompt $"\
			{ pass "attach" }
    -re "Kill it. .y or n." {
	send_gdb "y\n"
	exp_continue
    }
    -re "$gdb_prompt $" { fail "attach" }
    timeout { fail "(timeout) attach" }
}

# FIXME: attach kills the udi connection
if { [istarget "a29k-*-udi"] } {
    gdb_exit
    gdb_start
}

if ![target_info exists use_gdb_stub] {
    gdb_test "break" "No default breakpoint address now." "break"
    foreach i "b br bre brea" {
	gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
    }

    
    setup_xfail "mips-idt-*" "a29k-*-udi"
    gdb_test "backtrace" "No stack."

    # ba and bac are no longer unique command prefixes. So these tests
    # elict an error from GDB.
    # GDB needs to be fixed to map unique alias here for ba bac.
    #
    foreach i "bt ba bac" {
	setup_xfail "mips-idt-*" "a29k-*-udi"
	gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
    }
} else {
    warning "Skipping backtrace and break tests because of GDB stub."
}

# This works on the MIPS IDT board, but confuses future tests.
if ![istarget "mips-idt-*"] then {
    setup_xfail "a29k-*-udi"
    gdb_test "continue" "The program is not being run." "continue"
    setup_xfail "a29k-*-udi"
    gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
}

# FIXME: continue kills the udi connection
if [istarget "a29k-*-udi"] then {
    gdb_exit
    gdb_start
}

#test call
gdb_test "call" "The history is empty..*" "call"


#test catch
gdb_test "catch" "Catch requires an event name..*" "catch"

#test cd
gdb_test "cd" "Argument required .new working directory.*" "cd"

#test clear
gdb_test "clear" "No source file specified..*" "clear"

#test commands
gdb_test "commands" "No breakpoint number 0..*" "commands"

#test condition
gdb_test "condition" "Argument required .breakpoint number.*" "condition"

#test core-file
gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
#test delete "d" abbreviation
gdb_test "d" "" "delete \"d\" abbreviation"
#test delete
gdb_test "delete" "" "delete"
#test define
gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
#test delete breakpoints
gdb_test "delete breakpoints" "" "delete breakpoints"
#test delete display
# FIXME -- need to dump full output to detailed log
send_gdb "delete display\n"
gdb_expect {
    -re "Delete all auto-display expressions.*y or n. $" {
	send_gdb "y\n"
	gdb_expect {
	    -re "$gdb_prompt $"     { pass "delete display prompt" }
	    timeout		{ fail "(timeout) delete display prompt" }
	}
    }
    timeout		{ fail "(timeout) delete display prompt" }

}

#test detach
gdb_test "detach" "" "detach"

# FIXME: continue kills the udi connection
if [istarget "a29k-*-udi"] then {
    gdb_exit
    gdb_start
}
if [istarget "h8300-*-hms"] then {
    gdb_exit
    gdb_start
}

#test directory
# FIXME -- need to dump full output to detailed log

send_gdb "directory\n"
gdb_expect {
    -re "Reinitialize source path to empty.*y or n. $"  {
	send_gdb "y\n"
	gdb_expect {
	    -re "Source directories searched: .cdir:.cwd.*$gdb_prompt $"\
		    { pass "directory prompt" }
	    timeout		{ fail "(timeout) directory prompt" }
	}
    }
}

#test disable "dis" abbreviation
gdb_test "dis" "" "disable \"dis\" abbreviation"
#test disable "disa" abbreviation
gdb_test "disa" "" "disable \"disa\" abbreviation"
#test disable
gdb_test "disable" "" "disable"
#test disable breakpoints
gdb_test "disable breakpoints" "" "disable breakpoints"
#test disable display
gdb_test "disable display" "" "disable display"
#test disassemble
gdb_test "disassemble" "No frame selected." "disassemble"
#test display
gdb_test "display" "" "display"
#test do
gdb_test "do" "No stack." "do"
#test document
gdb_test "document" "Argument required .name of command to define.*" "document"
#test down
gdb_test "down" "No stack.*" "down"
#test down-silently
gdb_test "down-silently" "No stack." "down-silently"
#test echo
gdb_test "echo" "" "echo"
#test enable breakpoints delete
gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
#test enable breakpoints once
gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
#test enable breakpoints
gdb_test "enable breakpoints" "" "enable breakpoints"
#test enable delete
gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
#test enable display
gdb_test "enable display" "" "enable display"
#test enable once
gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
#test enable
gdb_test "enable" "" "enable"
#test exec-file
send_gdb "exec-file\n"
gdb_expect {
    -re "No executable file now..*$gdb_prompt $" {
	pass "exec-file"
    }
    -re "exec-file.*A program is being debugged already.  Kill it. .y or n.*$" {
	send_gdb "n\n"
	if $verbose>1 then {
	    send_user "\tDidn't kill program being debugged\n"
	}
	gdb_expect -re "$gdb_prompt $" { }
	pass "exec-file"
    }
    -re "$gdb_prompt $"	{ fail "exec-file" }
    timeout		{ fail "(timeout) exec-file" }
}

#test frame "f" abbreviation
setup_xfail "a29k-*-udi"
gdb_test "f" "No stack." "frame \"f\" abbreviation"
#test frame
setup_xfail "a29k-*-udi"
gdb_test "frame" "No stack." "frame"
#test fg
setup_xfail "a29k-*-udi"
gdb_test "fg" "The program is not being run." "fg"
# FIXME: fg kills the udi connection
#test file
send_gdb "file\n"
gdb_expect {
    -re "No executable file now..*$gdb_prompt $"\
	    { pass "file" }
    -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
	send_gdb "n\n"
	if $verbose>1 then {
	    send_user "\t\tDidn't kill program being debugged\n"
	}
	gdb_expect -re "$gdb_prompt $" { }
	pass "file"
    }
    -re ".*$gdb_prompt $"	{ fail "file" }
    timeout		{ fail "(timeout) file" }
}

#test finish
setup_xfail "a29k-*-udi"
gdb_test "finish" "The program is not running." "finish"
#test forward-search
# The message here comes from the regexp library, not gdb, and so can
# vary on different systems.
gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
#test help "h" abbreviation
gdb_test "h" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
#test help
gdb_test "help" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help"
#test handle
gdb_test "handle" "Argument required .signal to handle.*" "handle"
#test info "i" abbreviation 
gdb_test "i" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
#test info
gdb_test "info" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info"
#test ignore
gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
#test info address
gdb_test "info address" "Argument required." "info address"
#test info all-registers
setup_xfail "a29k-*-udi"
gdb_test "info all-registers" "The program has no registers now." "info all-registers"
#test info args
gdb_test "info args" "No frame selected." "info args"
#test info bogus-gdb-command
gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\".  Try \"help info\".*" "info bogus-gdb-command"
#test info breakpoints
gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
#test info catch
gdb_test "info catch" "You can't do that without a process to debug." "info catch"
#test info copying
# FIXME -- doesn't work worth a shit
#send_gdb "info copying"
#	-re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."# 
gdb_test "info copying"
#	}
#
#
#test info display
gdb_test "info display" "There are no auto-display expressions now." "info display"
#test info frame "f" abbreviation
gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
#test info frame
gdb_test "info frame" "No stack.|No selected frame." "info frame"
#test info files
gdb_test "info files" "" "info files"
#test info float
if [istarget "arm-*-*"] then {
    gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
} elseif [istarget "thumb-*-*"] then {
    gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
} elseif [istarget "strongarm-*-*"] then {
    gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
} elseif [istarget "i\[3456\]86-*-linux-gnu"] then {
    gdb_test "info float" "No registers."
} else {
    gdb_test "info float" "No floating point info available for this processor." "info float"
}
#test info functions
gdb_test "info functions" "All defined functions:" "info functions"
#test info locals
gdb_test "info locals" "No frame selected." "info locals"
#test info program
setup_xfail "a29k-*-udi"
gdb_test "info program" "The program being debugged is not being run." "info program"
#test info registers
setup_xfail "a29k-*-udi"
gdb_test "info registers" "The program has no registers now." "info registers"
#test info stack "s" abbreviation
setup_xfail "a29k-*-udi"
gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
#test info stack
setup_xfail "a29k-*-udi"
gdb_test "info stack" "No stack." "info stack"
#test info set
# FIXME -- needs to match the entire output
gdb_test "info set" "confirm:  Whether to confirm potentially dangerous operations is o\[a-z\]*..*\[\r\n\]+history filename:  The filename in which to record the command history is .*\[\r\n\]+listsize:  Number of source lines gdb will list by default is 10.*" "info set"
gdb_test "info symbol" "Argument required .address.."
#test info source
gdb_test  "info source" "No current source file..*" "info source"
#test info sources
gdb_test "info sources" "No symbol table is loaded.  Use the \"file\" command.*" "info sources"
#test info target
gdb_test "info target" "" "info target"
#test info terminal
gdb_test "info terminal" "No saved terminal information." "info terminal"
#test info types
gdb_test "info types" "All defined types:" "info types"
#test info variables
gdb_test "info variables" "All defined variables:" "info variables"
#test info warranty
setup_xfail "hppa*-hp-hpux*"
gdb_test "info warranty" "NO WARRANTY.*\[\r\n\]+  *11.  *BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY.*\[\r\n\]+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN.*\[\r\n\]+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES.*\[\r\n\]+PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED.*\[\r\n\]+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF.*\[\r\n\]+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS.*\[\r\n\]+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE.*\[\r\n\]+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,.*\[\r\n\]+REPAIR OR CORRECTION..*\[\r\n\]+  *12.  *IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING.*\[\r\n\]+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR.*\[\r\n\]+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,.*\[\r\n\]+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING.*\[\r\n\]+OUT OF THE USE OR INABILITY TO USE THE PROGRAM .INCLUDING BUT NOT LIMITED.*\[\r\n\]+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY.*\[\r\n\]+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER.*\[\r\n\]+PROGRAMS., EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE.*\[\r\n\]+POSSIBILITY OF SUCH DAMAGES.*" "info warranty"
#test info watchpoints
gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints"
#test inspect
gdb_test "inspect" "The history is empty." "inspect"
#test jump
setup_xfail "a29k-*-udi"
gdb_test "jump" "The program is not being run." "jump"
#test kill
gdb_test "kill" "The program is not being run." "kill"
#test list "l" abbreviation
gdb_test "l" "No symbol table is loaded.  Use the \"file\" command.*" "list \"l\" abbreviation"
#test list
gdb_test "list" "No symbol table is loaded.  Use the \"file\" command.*" "list"
#test load
# The ``takes a file name'' case is for vxgdb.
# The ``Use the "file" command'' case is for newer GDB versions which try
# to deduce the filename from the exec file.
gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
#test next "n" abbreviation
setup_xfail "a29k-*-udi"
gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
#test next
setup_xfail "a29k-*-udi"
gdb_test "next" "The program is not being run." "next"
#test nexti "ni" abbreviation
setup_xfail "a29k-*-udi"
gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
#test nexti
setup_xfail "a29k-*-udi"
gdb_test "nexti" "The program is not being run." "nexti"
#test output
gdb_test "output" "Argument required .expression to compute.*" "output"

#test overlay
gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
#test a non-existant overlay subcommand
gdb_test "overlay on"     "Undefined overlay command.* Try \"help overlay\"."
gdb_test "overlay manual" "" "overlay manual #1"
gdb_test "overlay auto"   ""
gdb_test "overlay off"    ""
gdb_test "overlay list"   "No sections are mapped."
gdb_test "overlay map"    "Overlay debugging not enabled.*" "overlay map #1"
gdb_test "overlay unmap"  "Overlay debugging not enabled.*" "overlay unmap #2"
gdb_test "overlay manual" "" "overlay manual #2"
gdb_test "overlay map"    "Argument required: name of an overlay section." "overlay map #2"
gdb_test "overlay unmap"  "Argument required: name of an overlay section." "overlay unmap #2"

#test print "p" abbreviation
gdb_test "p" "The history is empty." "print \"p\" abbreviation"
#test print
gdb_test "print" "The history is empty." "print"
#test printf
gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
#test ptype
gdb_test "ptype" "The history is empty." "ptype"
#test pwd
gdb_test "pwd" "Working directory .*" "pwd"

#test run "r" abbreviation
if [istarget "*-*-vxworks*"] then {
    gdb_test "set args" "" "" 

    gdb_test "r" "Starting program: .*
You must specify a function name to run, and arguments if any"\
		"run \"r\" abbreviation"
    gdb_test "set args main" "" "" 

} else {
    send_gdb "r\n"
    gdb_expect {
	    -re "Starting program:  .*
You can't do that when your target is `None'.*$gdb_prompt $"\
			{ pass "run \"r\" abbreviation" }
	    -re "Starting program:  .*
No executable file specified.*
Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
			{ pass "run \"r\" abbreviation" }
	    -re "Starting program:  .*
No image loaded into target.*$gdb_prompt $"\
			{ pass "run \"r\" abbreviation" }
	    -re "Starting program:  .*
No program loaded.*$gdb_prompt $"\
			{ pass "run \"r\" abbreviation" }
	    -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
			{ pass "run \"r\" abbreviation" }
	    -re ".*$gdb_prompt $"	{ fail "run \"r\" abbreviation" }
	    timeout		{ fail "(timeout) run \"r\" abbreviation" }
	}
}

#test run
if [istarget "*-*-vxworks*"] then {
    gdb_test "set args" "" "" 

    gdb_test "run" "Starting program: .*
You must specify a function name to run, and arguments if any"
    gdb_test "set args main" "" "" 

} else {
    send_gdb "run\n"
    gdb_expect {
	    -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" }
	    -re "Starting program:  .*
No executable file specified.*
Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
			{ pass "run" }
	    -re "Starting program:  .*
No image loaded into target.*$gdb_prompt $"\
			{ pass "run" }
	    -re "Starting program:  .*
No program loaded.*$gdb_prompt $"\
			{ pass "run \"r\" abbreviation" }
	    -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
			{ pass "run" }
	    -re ".*$gdb_prompt $"	{ fail "run" }
	    timeout		{ fail "(timeout) run" }
	}
}

#test rbreak
gdb_test "rbreak" "" "rbreak"

#test return
# The middle case accommodates the a29k, where doing the "ni" above causes
# an initial stack to be created.
gdb_test "return" "No selected frame..*" "return"  "Make .* return now.*y or n. $" "y"


#test reverse-search
gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
#test step "s" abbreviation
setup_xfail "a29k-*-udi"
gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
#test step
setup_xfail "a29k-*-udi"
gdb_test "step" "The program is not being run." "step #1"
#test search
gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
#test section
gdb_test "section" "Must specify section name and its virtual address.*" "section"
#test set annotate
gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
#test set args
gdb_test "set args" "" "set args"
#test set check "c" abbreviation
gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
#test set check "ch" abbreviation
gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
#test set check
gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check"
#test set check range
gdb_test "set check range" "" "set check range"
#test set check type
gdb_test "set check type" "" "set check type"
#test set complaints
gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
#test set confirm
gdb_test "set confirm" "" "set confirm"
# Don't test set editing. What if we're talking to a gdb that
# won't do editing correctly while we're talking to it?
# gdb_test "set editing" "" "set editing"

#test set environment
gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
#test set height
gdb_test "set height" "Argument required .integer to set it to.*" "set height"
#test set history expansion
gdb_test "set history expansion" "" "set history expansion"
#test set history filename
gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
#test set history save
gdb_test "set history save" "" "set history save"
#test set history size
gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
#test set history
gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set history"
#test set language
gdb_test "set language" "The currently understood settings are:.*\[\r\n\]+local or auto  *Automatic setting based on source file.*\[\r\n\]+c  *Use the C language.*\[\r\n\]+c\[+\]+  *Use the C\[+\]+ language.*\[\r\n\]+modula-2  *Use the Modula-2 language.*" "set language"
#test set listsize
gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
#test set print "p" abbreviation
gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
#test set print "pr" abbreviation
gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
#test set print
gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print"
#test set print address
gdb_test "set print address" "" "set print address"
#test set print array
gdb_test "set print array" "" "set print array"
#test set print asm-demangle
gdb_test "set print asm-demangle" "" "set print asm-demangle"
#test set print demangle
gdb_test "set print demangle" "" "set print demangle"
#test set print elements
gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
#test set print object
gdb_test "set print object" "" "set print object"
#test set print pretty
gdb_test "set print pretty" "" "set print pretty"
#test set print sevenbit-strings
gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings"
#test set print union
gdb_test "set print union" "" "set print union"
#test set print vtbl
gdb_test "set print vtbl" "" "set print vtbl"
# FIXME -- need a test for "set prompt"
#test set radix
gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
#test set symbol-reloading
gdb_test "set symbol-reloading" "" "set symbol-reloading"
#test set variable
gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
#test set verbose
gdb_test "set verbose" "" "set verbose"
#test set width
gdb_test "set width" "Argument required .integer to set it to.*" "set width"
#test set write
# This is only supported on targets which use exec.o.
gdb_test "set write" "" "set write"
#test set
gdb_test "set" "Argument required .expression to compute.*" "set"
#test shell echo Hi dad!
gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
#test show annotate
gdb_test "show annotate" "Annotation_level is 0." 	 "show annotate"
#test show args
gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
#test show check "c" abbreviation
gdb_test "show c" "range:  *Range checking is \"auto; currently off\"..*\[\r\n\]+type:  *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
#test show check "ch" abbreviation
gdb_test "show ch" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type:  *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
#test show check
gdb_test "show check" "range:  *Range checking is \"auto; currently off\"..*\[\r\n\]+type:  *Type checking is \"auto; currently off\"." "show check"
#test show check range
gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
#test show check type
gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
#test show commands
gdb_test "show commands" "" "show commands"
#test show complaints
gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
#test show confirm
gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
#test show convenience
gdb_test "show convenience" "No debugger convenience variables now defined..*\[\r\n\]+Convenience variables have names starting with \".\";.*\[\r\n\]+use \"set\" as in \"set .foo = 5\" to define them." "show convenience"
#test show directories
gdb_test "show directories" "Source directories searched: .cdir:.cwd" "show directories"
#test show editing
gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
#test show height
gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
#test show history expansion
gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
#test show history filename
gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
#test show history save
gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
#test show history size
gdb_test "show history size" "The size of the command history is.*" "show history size"
#test show history
gdb_test "show history" "expansion:  *History expansion on command input is o.*\[\r\n\]+filename:  *The filename in which to record the command history is.*.gdb_history.*\[\r\n\]+save: *Saving of the history record on exit is o.*\[\r\n\]+size: * The size of the command history is.*" "show history"
#test show language
gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
#test show listsize
gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
#test show print "p" abbreviation
gdb_test "show p" ".*" "show p"
#test show print "pr" abbreviation
gdb_test "show pr" ".*" "show pr"
#test show print
gdb_test "show print" "" "show print"
#test show paths
gdb_test "show paths" "Executable and object file path:.*" "show paths"
#test show print address
gdb_test "show print address" "Printing of addresses is on." "show print address"
#test show print array
gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
#test show print asm-demangle
gdb_test "show print asm-demangle" "Demangling of C\[+\]+ names in disassembly listings is on." "show print asm-demangle"
#test show print demangle
gdb_test "show print demangle" "Demangling of encoded C\[+\]+ names when displaying symbols is on." "show print demangle"
#test show print elements
gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
#test show print object
gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
#test show print pretty
gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
#test show print sevenbit-strings
gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
#test show print union
gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
#test show print vtbl
gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
#test show prompt
# In the FAIL case, can't just look for $gdb_prompt because that will match
# the output, rather than the prompt. So look for $gdb_prompt at the start
# of a line.
gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
#test show radix
gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
#test show symbol-reloading
gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
#test show user
gdb_test "show user" "" "show user"
#test show values
gdb_test "show values" "" "show values"
#test show verbose
gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
#test show version
setup_xfail "hppa*-hp-hpux*"
gdb_test "show version" "GNU gdb \[0-9\.\]*.*\[\r\n\]+Copyright \[0-9\]* Free Software Foundation, Inc.*\[\r\n\]+GDB is free software, covered by the GNU General Public License, and you are.*\[\r\n\]+welcome to change it and/or distribute copies of it under certain conditions.*\[\r\n\]+Type \"show copying\" to see the conditions.*\[\r\n\]+There is absolutely no warranty for GDB.  Type \"show warranty\" for details.*\[\r\n\]+This GDB was configured as .*|GDB is free software and you are welcome to distribute copies of it.*\[\r\n\]+ under certain conditions; type \"show copying\" to see the conditions..*\[\r\n\]+There is absolutely no warranty for GDB; type \"show warranty\" for details..*\[\r\n\]+GDB.*Copyright \[0-9\]* Free Software Foundation, Inc.*" "show version"
#test show width
gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
#test show write
# This is only supported on targets which use exec.o.
gdb_test "show write" "Writing into executable and core files is o.*" "show write"
#test show
gdb_test "show" "confirm:  *Whether to confirm potentially dangerous operations is on..*\[\r\n\]+history filename:  *The filename in which to record the command history is .*\[\r\n\]+history save:  *Saving of the history record on exit is on..*\[\r\n\]+history size:  *The size of the command history is.*\[\r\n\]+listsize:  *Number of source lines gdb will list by default is 10.*\[\r\n\]+print elements:  *Limit on string chars or array elements to print is 200..*" "show"
#test stepi "si" abbreviation
setup_xfail "a29k-*-udi"
gdb_test  "si" "The program is not being run." "stepi \"si\" abbreviation"
#test stepi
setup_xfail "a29k-*-udi"
gdb_test "stepi" "The program is not being run." "stepi"
#test signal
setup_xfail "a29k-*-udi"
gdb_test "signal" "The program is not being run." "signal"
#test source
gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source"
#test step "s" abbreviation
setup_xfail "a29k-*-udi"
gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
#test step
setup_xfail "a29k-*-udi"
gdb_test "step" "The program is not being run." "step #2"
#test symbol-file
gdb_test "symbol-file" "" "symbol-file"

#test target child
gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\".  *Try \"help target\".*" "target child"

#test target procfs
gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\".  *Try \"help target\".*" "target procfs"

#test target core
send_gdb "target core\n"
gdb_expect {
    -re "No core file specified..*$gdb_prompt $" { pass "target core" }
    -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
	send_gdb "n\n"
	if $verbose>1 then {
	    send_user "\t\tDidn't kill program being debugged\n"
	}
	gdb_expect -re "$gdb_prompt $" { }
	pass "target core"
    }
    -re "Undefined target command: \"core\".  Try \"help target\"..*$gdb_prompt $" { pass "target core" }
    -re ".*$gdb_prompt $"	{ fail "target core" }
    timeout		{ fail "(timeout) target core" }
}

#test target exec
send_gdb "target exec\n"
gdb_expect {
	-re "No executable file now..*$gdb_prompt $"\
			{ pass "target exec" }
	-re ".*A program is being debugged already.  Kill it. .y or n.*$" {
	    send_gdb "n\n"
	    if $verbose>1 then {
		send_user "\t\tDidn't kill program being debugged\n"
	    }
	    gdb_expect -re "$gdb_prompt $" { }
	    pass "target exec"
	}
	-re ".*$gdb_prompt $"	{ fail "target exec" }
	timeout		{ fail "(timeout) target exec" }
	}

#test target remote
if ![istarget "*-*-udi*"] then {
    send_gdb "target remote\n"
    gdb_expect {
	-re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system .e.g. /dev/ttya.*$gdb_prompt $"\
			{ pass "target remote" }
	-re ".*A program is being debugged already.  Kill it. .y or n.*$" {
	    send_gdb "n\n"
	    if $verbose>1 then {
		send_user "\t\tDidn't kill program being debugged\n"
	    }
	    gdb_expect -re "$gdb_prompt $" { }
	    pass "target remote"
	}
	-re ".*$gdb_prompt $"	{ fail "target remote" }
	timeout		{ fail "(timeout) target remote" }
    }
}

#test target
gdb_test "target" "Argument required .target name.*" "target"
#test tbreak
gdb_test "tbreak" "No default breakpoint address now." "tbreak"
#test tty
gdb_test "tty" "Argument required .terminal name for running target process.*" "tty"
#test until "u" abbreviation
setup_xfail "a29k-*-udi"
gdb_test "u" "The program is not running." "until \"u\" abbreviation"
#test until
setup_xfail "a29k-*-udi"
gdb_test "until" "The program is not running." "until"
#test undisplay
# FIXME -- need to dump full output to detailed log
send_gdb "undisplay\n"
gdb_expect {
    -re "Delete all auto-display expressions.*y or n. $" {
	send_gdb "y\n"
	gdb_expect {
	    -re "$gdb_prompt $" { pass "undisplay prompt" }
	    timeout { fail "(timeout) (timeout) undisplay prompt"    }
	}
    }
    timeout		{ fail "(timeout) (timeout) undisplay prompt" }
}

#test unset environment
send_gdb "unset environment\n"
gdb_expect {
    -re "Delete all environment variables?.*y or n. $" { 
	send_gdb "y\n"
	gdb_expect {
	    -re "$gdb_prompt $" { pass "unset environmentprompt" }
	    timeout {
		fail "(timeout) (timeout) unset environment prompt"
	    }
	}
    }
    timeout { 
	fail "(timeout) (timeout) unset environment prompt"
    }
}

#test unset
gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand..*\[\r\n\]+List of unset subcommands:.*\[\r\n\]+unset environment -- Cancel environment variable VAR for the program.*\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "unset"
#test up
#test up-silently
gdb_test "up-silently" "No stack." "up-silently"
#test watch
gdb_test "watch" "Argument required .expression to compute.*" "watch"
#test whatis
gdb_test "whatis" "The history is empty." "whatis"
#test where
setup_xfail "a29k-*-udi"
gdb_test "where" "No stack." "where"
#test x
#The case in which it prints a number is for vxgdb.
send_gdb "x\n"
gdb_expect {
    -re "0x0:.*Cannot access memory at address 0x0..*$gdb_prompt $" {
        pass "x"
    }
    -re "0x0:.*Error accessing memory address 0x0:.*$gdb_prompt $" {
        pass "x"
    }
    -re ".*$gdb_prompt $" { fail "x" }
    timeout { fail "(timeout) x" }
}

gdb_exit