path: root/gdb/config/i386/tm-i386.h

/* Macro definitions for GDB on an Intel i[345]86.
   Copyright (C) 1995, 1996 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place - Suite 330,
   Boston, MA 02111-1307, USA.  */

#ifndef TM_I386_H
#define TM_I386_H 1

#ifdef __STDC__			/* Forward decl's for prototypes */
struct frame_info;
struct frame_saved_regs;
struct type;
#endif

#define TARGET_BYTE_ORDER LITTLE_ENDIAN

/* Used for example in valprint.c:print_floating() to enable checking
   for NaN's */

#define IEEE_FLOAT

/* Number of traps that happen between exec'ing the shell to run an
   inferior, and when we finally get to the inferior code.  This is 2
   on most implementations. */

#define START_INFERIOR_TRAPS_EXPECTED 2

/* Offset from address of function to start of its code.
   Zero on most machines.  */

#define FUNCTION_START_OFFSET 0

/* Advance PC across any function entry prologue instructions to reach some
   "real" code.  */

#define SKIP_PROLOGUE(frompc)   (i386_skip_prologue (frompc))

extern int i386_skip_prologue PARAMS ((int));

/* Immediately after a function call, return the saved pc.  Can't always go
   through the frames for this because on some machines the new frame is not
   set up until the new function executes some instructions.  */

#define SAVED_PC_AFTER_CALL(frame) (read_memory_integer (read_register (SP_REGNUM), 4))

/* Stack grows downward.  */

#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))

/* Sequence of bytes for breakpoint instruction.  */

#define BREAKPOINT {0xcc}

/* Amount PC must be decremented by after a breakpoint.  This is often the
   number of bytes in BREAKPOINT but not always. */

#define DECR_PC_AFTER_BREAK 1

/* Say how long (ordinary) registers are.  This is a piece of bogosity
   used in push_word and a few other places; REGISTER_RAW_SIZE is the
   real way to know how big a register is.  */

#define REGISTER_SIZE 4

/* Number of machine registers */

#define NUM_FREGS 0 /*8*/	/* Number of FP regs */
#define NUM_REGS (16 + NUM_FREGS)	/* Basic i*86 regs + FP regs */

/* Initializer for an array of names of registers.  There should be at least
   NUM_REGS strings in this initializer.  Any excess ones are simply ignored.
   The order of the first 8 registers must match the compiler's numbering
   scheme (which is the same as the 386 scheme) and also regmap in the various
   *-nat.c files. */

#define REGISTER_NAMES { "eax",   "ecx",    "edx",   "ebx", \
			 "esp",   "ebp",    "esi",   "edi", \
			 "eip",   "eflags", "cs",    "ss", \
			 "ds",    "es",     "fs",    "gs", \
			 "st0",   "st1",    "st2",   "st3", \
			 "st4",   "st5",    "st6",   "st7", \
			 }

/* Register numbers of various important registers.
   Note that some of these values are "real" register numbers,
   and correspond to the general registers of the machine,
   and some are "phony" register numbers which are too large
   to be actual register numbers as far as the user is concerned
   but do serve to get the desired values when passed to read_register.  */

#define FP_REGNUM 5		/* (ebp) Contains address of executing stack frame */
#define SP_REGNUM 4		/* (usp) Contains address of top of stack */
#define PC_REGNUM 8		/* (eip) Contains program counter */
#define PS_REGNUM 9		/* (ps)  Contains processor status */

#define FP0_REGNUM 16		/* (st0) 387 register */
#define FPC_REGNUM 25		/* 80387 control register */

/* Total amount of space needed to store our copies of the machine's register
   state, the array `registers'. */

#define REGISTER_BYTES ((NUM_REGS - NUM_FREGS)*4 + NUM_FREGS*10)

/* Index within `registers' of the first byte of the space for register N. */

#define REGISTER_BYTE(N) \
  (((N) < FP0_REGNUM) ? ((N) * 4) : ((((N) - FP0_REGNUM) * 10) + 64))

/* Number of bytes of storage in the actual machine representation for
   register N.  All registers are 4 bytes, except 387 st(0) - st(7),
   which are 80 bits each. */

#define REGISTER_RAW_SIZE(N) (((N) < FP0_REGNUM) ? 4 : 10)

/* Largest value REGISTER_RAW_SIZE can have.  */

#define MAX_REGISTER_RAW_SIZE 10

/* Number of bytes of storage in the program's representation
   for register N. */

#define REGISTER_VIRTUAL_SIZE(N) (((N) < FP0_REGNUM) ? 4 : 8)

/* Largest value REGISTER_VIRTUAL_SIZE can have.  */

#define MAX_REGISTER_VIRTUAL_SIZE 8

/* Return the GDB type object for the "standard" data type of data in 
   register N.  Perhaps si and di should go here, but potentially they
   could be used for things other than address.  */

#define REGISTER_VIRTUAL_TYPE(N) \
  (((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM) \
   ? lookup_pointer_type (builtin_type_void) \
   : (((N) < FP0_REGNUM) \
      ? builtin_type_int \
      : builtin_type_double))

/* Store the address of the place in which to copy the structure the
   subroutine will return.  This is called from call_function. */

#define STORE_STRUCT_RETURN(ADDR, SP) \
  { char buf[REGISTER_SIZE];	\
    (SP) -= sizeof (ADDR);	\
    store_address (buf, sizeof (ADDR), ADDR);	\
    write_memory ((SP), buf, sizeof (ADDR)); }

/* Extract from an array REGBUF containing the (raw) register state
   a function return value of type TYPE, and copy that, in virtual format,
   into VALBUF.  */

#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
   i386_extract_return_value ((TYPE),(REGBUF),(VALBUF))

extern void i386_extract_return_value PARAMS ((struct type *, char[], char *));

/* Write into appropriate registers a function return value of type TYPE, given
   in virtual format.  */

#define STORE_RETURN_VALUE(TYPE,VALBUF) \
  {    	       	       	       	       	       	       	       	       	     \
    if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				     \
      write_register_bytes (REGISTER_BYTE (FP0_REGNUM), (VALBUF),	     \
			    TYPE_LENGTH (TYPE));			     \
    else								     \
      write_register_bytes (0, (VALBUF), TYPE_LENGTH (TYPE));  		     \
  }

/* Extract from an array REGBUF containing the (raw) register state the address
   in which a function should return its structure value, as a CORE_ADDR (or an
   expression that can be used as one).  */

#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))

/* The following redefines make backtracing through sigtramp work.
   They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp
   from the sigcontext structure which is pushed by the kernel on the
   user stack, along with a pointer to it.  */

/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
   chain-pointer.
   In the case of the i386, the frame's nominal address
   is the address of a 4-byte word containing the calling frame's address.  */

#define FRAME_CHAIN(thisframe)  \
  ((thisframe)->signal_handler_caller \
   ? (thisframe)->frame \
   : (!inside_entry_file ((thisframe)->pc) \
      ? read_memory_integer ((thisframe)->frame, 4) \
      : 0))

/* A macro that tells us whether the function invocation represented
   by FI does not have a frame on the stack associated with it.  If it
   does not, FRAMELESS is set to 1, else 0.  */

#define FRAMELESS_FUNCTION_INVOCATION(FI) \
     (((FI)->signal_handler_caller) ? 0 : frameless_look_for_prologue(FI))

/* Saved Pc.  Get it from sigcontext if within sigtramp.  */

#define FRAME_SAVED_PC(FRAME) \
  (((FRAME)->signal_handler_caller \
    ? sigtramp_saved_pc (FRAME) \
    : read_memory_integer ((FRAME)->frame + 4, 4)) \
   )

extern CORE_ADDR sigtramp_saved_pc PARAMS ((struct frame_info *));

#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)

#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)

/* Return number of args passed to a frame.  Can return -1, meaning no way
   to tell, which is typical now that the C compiler delays popping them.  */

#define FRAME_NUM_ARGS(fi) (i386_frame_num_args(fi))

extern int i386_frame_num_args PARAMS ((struct frame_info *));

/* Return number of bytes at start of arglist that are not really args.  */

#define FRAME_ARGS_SKIP 8

/* Put here the code to store, into a struct frame_saved_regs,
   the addresses of the saved registers of frame described by FRAME_INFO.
   This includes special registers such as pc and fp saved in special
   ways in the stack frame.  sp is even more special:
   the address we return for it IS the sp for the next frame.  */

#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
{ i386_frame_find_saved_regs ((frame_info), &(frame_saved_regs)); }

extern void i386_frame_find_saved_regs PARAMS ((struct frame_info *,
						struct frame_saved_regs *));


/* Things needed for making the inferior call functions.  */

/* Push an empty stack frame, to record the current PC, etc.  */

#define PUSH_DUMMY_FRAME { i386_push_dummy_frame (); }

extern void i386_push_dummy_frame PARAMS ((void));

/* Discard from the stack the innermost frame, restoring all registers.  */

#define POP_FRAME  { i386_pop_frame (); }

extern void i386_pop_frame PARAMS ((void));


/* this is 
 *   call 11223344 (32 bit relative)
 *   int3
 */

#define CALL_DUMMY { 0x223344e8, 0xcc11 }

#define CALL_DUMMY_LENGTH 8

#define CALL_DUMMY_START_OFFSET 0	/* Start execution at beginning of dummy */

#define CALL_DUMMY_BREAKPOINT_OFFSET 5

/* Insert the specified number of args and function address
   into a call sequence of the above form stored at DUMMYNAME.  */

#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
{ \
	int from, to, delta, loc; \
	loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH); \
	from = loc + 5; \
	to = (int)(fun); \
	delta = to - from; \
	*((char *)(dummyname) + 1) = (delta & 0xff); \
	*((char *)(dummyname) + 2) = ((delta >> 8) & 0xff); \
	*((char *)(dummyname) + 3) = ((delta >> 16) & 0xff); \
	*((char *)(dummyname) + 4) = ((delta >> 24) & 0xff); \
}

extern void print_387_control_word PARAMS ((unsigned int));
extern void print_387_status_word PARAMS ((unsigned int));

/* Offset from SP to first arg on stack at first instruction of a function */

#define SP_ARG0 (1 * 4)

#endif /* ifndef TM_I386_H */