path: root/gdb/ChangeLog

2014-02-14  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register
	the proper offsets to access fpregset_t.

2014-02-13  Sanimir Agovic  <sanimir.agovic@intel.com>

	* cris-tdep.c (cris_supply_gregset): Remove zerobuf.
	(_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
	* h8300-tdep.c (setmachinelist): Remove global.
	* hppa-tdep.c (hppa_sigtramp): Remove global.
	* mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
	RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
	* ravenscar-thread.c (update_target_observer): Remove global.
	* rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* common/rsp-low.c: Update comments.
	* common/rsp-low.h: Update comments.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* common/rsp-low.c (convert_ascii_to_int): Remove.
	* common/rsp-low.h (convert_ascii_to_int): Don't declare.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* common/rsp-low.h (unhexify): Don't declare.
	* common/rsp-low.c (unhexify): Remove.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* common/rsp-low.h (convert_int_to_ascii): Don't declare.
	* common/rsp-low.c (convert_int_to_ascii): Remove.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* common/rsp-low.h (hexify): Don't declare.
	* common/rsp-low.c (hexify): Remove.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* common/rsp-low.c (hexify): Never take strlen of argument.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* common/rsp-low.c (bin2hex): Never take strlen of argument.
	* remote.c (extended_remote_run, remote_rcmd)
	(remote_download_trace_state_variable, remote_save_trace_data)
	(remote_set_trace_notes): Update.
	* tracepoint.c (encode_source_string, tfile_write_status)
	(tfile_write_uploaded_tsv): Update.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* tracepoint.c: Include rsp-low.h.
	* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
	* remote.c: Include rsp-low.h.
	(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
	(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
	(remote_unescape_input): Move to common/rsp-low.c.
	* common/rsp-low.h: New file.
	* common/rsp-low.c: New file.
	* Makefile.in (SFILES): Add common/rsp-low.c.
	(HFILES_NO_SRCDIR): Add common/rsp-low.h.
	(COMMON_OBS): Add rsp-low.o.
	(rsp-low.o): New target.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* utils.h: Include print-utils.h.
	(host_address_to_string, plongest, pulongest, phex, phex_nz)
	(int_string, core_addr_to_string, core_addr_to_string_nz)
	(hex_string, hex_string_custom): Don't declare.
	* utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
	(plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
	(hex_string_custom, int_string, core_addr_to_string)
	(core_addr_to_string_nz, host_address_to_string): Move to
	common/print-utils.c.
	* common/print-utils.h: New file.
	* common/print-utils.c: New file
	* Makefile.in (SFILES): Add common/print-utils.c.
	(HFILES_NO_SRCDIR): Add common/print-utils.h.
	(COMMON_OBS): Add print-utils.o.
	(print-utils.o): New target.

2014-02-12  Tom Tromey  <tromey@redhat.com>

	* nios2-tdep.c (nios2_stub_frame_base_address): Remove.

2014-02-12  Mark Kettenis  <kettenis@gnu.org>

	* sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.

2014-02-12  Mark Kettenis  <kettenis@gnu.org>

	* inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
	if a PT_IO ptrace request returns sucessfully but indicates that 0
	bytes were transferred.

2014-02-12  Pedro Alves  <palves@redhat.com>
	    Kevin Buettner <kevinb@redhat.com>

	* gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
	TYPE_INSTANCE_FLAG_CODE_SPACE.

2014-02-12  Pedro Alves  <palves@redhat.com>

	* h8300-tdep.c (pseudo_from_raw_register)
	(raw_from_pseudo_register): New functions.
	(h8300_pseudo_register_read, h8300_pseudo_register_write): Use
	them.

2014-02-12  Pedro Alves  <palves@redhat.com>

	* h8300-tdep.c (h8300_register_sim_regno): New function.
	(h8300_gdbarch_init): Install h8300_register_sim_regno as
	gdbarch_register_sim_regno hook.

2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>

	* nios2-tdep.c (nios2_stub_frame_base): Remove global.

2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>

	* tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.

2014-02-12  Mark Kettenis  <kettenis@gnu.org>

	* obsd-tdep.h (obsd_init_abi): New prototype.
	* obsd-tdep.c: Define enum with OpenBSD signal numbers.
	(obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
	(obsd_init_abi): New functions.
	* i386obsd-tdep.c: Include "obsd-tdep.h".
	(i386obsd_init_abi): Call obsd_init_abi.
	* amd64obsd-tdep.c: Include "obsd-tdep.h".
	(amd64obsd_init_abi): Call obsd_init_abi.
	* configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
	obsd-tdep.c to gdb_target_obs.

2014-02-11  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
        double float arguments to 16-byte in the argument slots.

2014-02-11  Doug Evans  <xdje42@gmail.com>

	* configure.ac: Don't crash if pkg-config is not found and guile
	wasn't explicitly requested.  Use AC_MSG_ERROR instead of AC_ERROR
	in guile checks.
	* configure: Regenerate.

2014-02-11  Yao Qi  <yao@codesourcery.com>

	* aix-thread.c (aix_thread_xfer_partial): Update comments.
	* auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
	* bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
	* gnu-nat.c (gnu_xfer_memory): Likewise.
	* inf-ptrace.c (inf_ptrace_xfer_partial):  Likewise.
	* rs6000-nat.c (rs6000_xfer_partial): Likewise.
	* sparc-nat.c (sparc_xfer_wcookie): Likewise.
	* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.

2014-02-11  Yao Qi  <yao@codesourcery.com>

	* target.h (enum target_xfer_error): Rename to ...
	(enum target_xfer_status): ... it.  New.  All users updated.
	(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
	New.
	(TARGET_XFER_STATUS_ERROR_P): New macro.
	(target_xfer_error_to_string): Remove declaration.
	(target_xfer_status_to_string): Declare.
	(target_xfer_partial_ftype): Adjust it.
	(struct target_ops) <to_xfer_partial>: Return
	target_xfer_status.  Add argument xfered_len.  Update
	comments.
	* target.c (target_xfer_error_to_string): Rename to ...
	(target_xfer_status_to_string): ... it.  New.  All callers
	updated.
	(target_read_live_memory): Likewise.  Call target_xfer_partial
	instead of target_read.
	(memory_xfer_live_readonly_partial): Return
	target_xfer_status.  Add argument xfered_len.
	(raw_memory_xfer_partial): Likewise.
	(memory_xfer_partial_1): Likewise.
	(memory_xfer_partial): Likewise.
	(target_xfer_partial): Likewise.  Check *XFERED_LEN is set
	properly.  Update debug message.
	(default_xfer_partial, current_xfer_partial): Likewise.
	(target_write_partial): Likewise.
	(target_read_partial): Likewise.  All callers updated.
	(read_whatever_is_readable): Likewise.
	(target_write_with_progress): Likewise.
	(target_read_alloc_1): Likewise.

	* aix-thread.c (aix_thread_xfer_partial): Likewise.
	* auxv.c (procfs_xfer_auxv): Likewise.
	(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
	* bfd-target.c (target_bfd_xfer_partial): Likewise.
	* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
	* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
	* corefile.c (read_memory): Adjust.
	* corelow.c (core_xfer_partial): Likewise.
	* ctf.c (ctf_xfer_partial): Likewise.
	* darwin-nat.c (darwin_read_dyld_info): Likewise.  All callers
	updated.
	(darwin_xfer_partial): Likewise.
	* exec.c (section_table_xfer_memory_partial): Likewise.  All
	callers updated.
	(exec_xfer_partial): Likewise.
	* exec.h (section_table_xfer_memory_partial): Update
	declaration.
	* gnu-nat.c (gnu_xfer_memory): Likewise.  Assert 'res' is not
	negative.
	(gnu_xfer_partial): Likewise.
	* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
	(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
	(ia64_hpux_xfer_solib_got): Likewise.
	* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.  Change
	type of 'partial_len' to ULONGEST.
	* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
	* linux-nat.c (linux_xfer_siginfo ): Likewise.
	(linux_nat_xfer_partial): Likewise.
	(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
	(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
	* monitor.c (monitor_xfer_memory): Likewise.
	(monitor_xfer_partial): Likewise.
	* procfs.c (procfs_xfer_partial): Likewise.
	* record-btrace.c (record_btrace_xfer_partial): Likewise.
	* record-full.c (record_full_xfer_partial): Likewise.
	(record_full_core_xfer_partial): Likewise.
	* remote-sim.c (gdbsim_xfer_memory): Likewise.
	(gdbsim_xfer_partial): Likewise.
	* remote.c (remote_write_bytes_aux): Likewise.  All callers
	updated.
	(remote_write_bytes, remote_read_bytes): Likewise.  All
	callers updated.
	(remote_flash_erase): Likewise.  All callers updated.
	(remote_write_qxfer): Likewise.  All callers updated.
	(remote_read_qxfer): Likewise.  All callers updated.
	(remote_xfer_partial): Likewise.
	* rs6000-nat.c (rs6000_xfer_partial): Likewise.
	(rs6000_xfer_shared_libraries): Likewise.
	* sol-thread.c (sol_thread_xfer_partial): Likewise.
	(sol_thread_xfer_partial): Likewise.
	* sparc-nat.c (sparc_xfer_wcookie): Likewise.
	(sparc_xfer_partial): Likewise.
	* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.  All callers
	updated.
	(spu_xfer_partial): Likewise.
	* spu-multiarch.c (spu_xfer_partial): Likewise.
	* tracepoint.c (tfile_xfer_partial): Likewise.
	* windows-nat.c (windows_xfer_memory): Likewise.
	(windows_xfer_shared_libraries): Likewise.
	(windows_xfer_partial): Likewise.
	* valprint.c: Replace 'target_xfer_error' with
	'target_xfer_status' in comments.

2014-02-11  Simon Marchi  <simon.marchi@ericsson.com>  (tiny patch)

	Checked in by Joel Brobecker <brobecker@adacore.com>.
	* mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.

2014-02-11  Joel Brobecker  <brobecker@adacore.com>

	* symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
	function parameters.

2014-02-10  Will Newton  <will.newton@linaro.org>

	* elfread.c (elf_rel_plt_read): Look for a .got section if
	looking up .got.plt fails.
	(elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
	on address passed to elf_gnu_ifunc_record_cache.
	(elf_gnu_ifunc_resolve_addr): Likewise.
	(elf_gnu_ifunc_resolver_return_stop): Likewise.

2014-02-10  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-tdep.c (sparc_in_function_epilogue_p): New function.
	(X_RETTURN): New macro.
	* sparc-tdep.h: sparc_in_function_epilogue_p prototype.

	* sparc64-tdep.c (sparc64_init_abi): Hook
	sparc_in_function_epilogue_p.

2014-02-10  Gary Benson  <gbenson@redhat.com>

	* symfile-debug.c (debug_qf_expand_symtabs_matching):
	Rename name_matcher to symbol_matcher.

2014-02-10  Gary Benson  <gbenson@redhat.com>

	* symfile-debug.c (debug_qf_expand_symtabs_matching):
	Use expand_symtabs_file_matcher_ftype and
	expand_symtabs_symbol_matcher_ftype.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
	(struct ada_symbol_cache): New.
	(ada_free_symbol_cache): Forward declare.
	(struct ada_pspace_data): New.
	(ada_pspace_data_handle): New static global.
	(get_ada_pspace_data, ada_pspace_data_cleanup)
	(ada_init_symbol_cache, ada_free_symbol_cache): New functions.
	(cache_space, cache): Delete, now folded inside struct
	ada_pspace_data.
	(ada_get_symbol_cache): New function.
	(ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
	implementation.
	(_initialize_ada_language): Remove initialization of cache_space.
	Move call to observer_attach_inferior_exit up, grouping it
	with the other observer registrations inside this function.
	Rename command to be more general.  Add call to
	register_program_space_data_with_cleanup.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

	* ada-tasks.c (ada_tasks_new_objfile_observer): Renames
	ada_new_objfile_observer.
	(ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
	(_initialize_tasks): Update uses of ada_new_objfile_observer
	and ada_tasks_normal_stop_observer.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_evaluate_subexp): Set the type of the value
	returned by the 'Length attribute to integer.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (_initialize_ada_language): Initialize
	cache_space obstack.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (HASH_SIZE): New macro.
	(struct cache_entry): New type.
	(cache_space, cache): New static globals.
	(ada_clear_symbol_cache, find_entry): New functions.
	(lookup_cached_symbol, cache_symbol): Implement.
	(ada_new_objfile_observer, ada_free_objfile_observer): New.
	(_initialize_ada_language): Attach ada_new_objfile_observer
	and ada_free_objfile_observer.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
	(lookup_cached_symbol, ada_add_local_symbols): Add "const" to
	struct block * parameter.
	(ada_lookup_symbol_list_worker): Constify local variable "block".
	Remove cast which is no longer necessary.

2014-02-10  Doug Evans  <xdje42@gmail.com>

	Add Guile as an extension language.
	* NEWS: Mention Guile scripting.
	* Makefile.in (SUBDIR_GUILE_OBS): New variable.
	(SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
	(SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
	(INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
	(CLIBS): Add GUILE_LIBS.
	(install-guile): New rule.
	(guile.o): New rule.
	(scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
	(scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
	(scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
	(scm-math.o, scm-objfile.o, scm-ports.o): New rules.
	(scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
	(scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
	(scm-type.o, scm-utils.o, scm-value.o): New rules.
	* configure.ac: New option --with-guile.
	* configure: Regenerate.
	* config.in: Regenerate.
	* auto-load.c: Remove #include "python/python.h".  Add #include
	"gdb/section-scripts.h".
	(source_section_scripts): Handle Guile scripts.
	(_initialize_auto_load): Add name of Guile objfile script to
	scripts-directory help text.
	* breakpoint.c (condition_command): Tweak comment to include Scheme.
	* breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
	(struct breakpoint): New member scm_bp_object.
	* defs.h (enum command_control_type): New value guile_control.
	* cli/cli-cmds.c: Remove #include "python/python.h".  Add #include
	"extension.h".
	(show_user): Update comment.
	(_initialize_cli_cmds): Update help text for "show user".  Update help
	text for max-user-call-depth.
	* cli/cli-script.c: Remove #include "python/python.h".  Add #include
	"extension.h".
	(multi_line_command_p): Add guile_control.
	(print_command_lines): Handle guile_control.
	(execute_control_command, recurse_read_control_structure): Ditto.
	(process_next_line): Recognize "guile" commands.
	* disasm.c (gdb_disassemble_info): Make non-static.
	* disasm.h: #include "dis-asm.h".
	(struct gdbarch): Add forward decl.
	(gdb_disassemble_info): Declare.
	* extension.c: #include "guile/guile.h".
	(extension_languages): Add guile.
	(get_ext_lang_defn): Handle EXT_LANG_GDB.
	* extension.h (enum extension_language): New value EXT_LANG_GUILE.
	* gdbtypes.c (get_unsigned_type_max): New function.
	(get_signed_type_minmax): New function.
	* gdbtypes.h (get_unsigned_type_max): Declare.
	(get_signed_type_minmax): Declare.
	* guile/README: New file.
	* guile/guile-internal.h: New file.
	* guile/guile.c: New file.
	* guile/guile.h: New file.
	* guile/scm-arch.c: New file.
	* guile/scm-auto-load.c: New file.
	* guile/scm-block.c: New file.
	* guile/scm-breakpoint.c: New file.
	* guile/scm-disasm.c: New file.
	* guile/scm-exception.c: New file.
	* guile/scm-frame.c: New file.
	* guile/scm-gsmob.c: New file.
	* guile/scm-iterator.c: New file.
	* guile/scm-lazy-string.c: New file.
	* guile/scm-math.c: New file.
	* guile/scm-objfile.c: New file.
	* guile/scm-ports.c: New file.
	* guile/scm-pretty-print.c: New file.
	* guile/scm-safe-call.c: New file.
	* guile/scm-string.c: New file.
	* guile/scm-symbol.c: New file.
	* guile/scm-symtab.c: New file.
	* guile/scm-type.c: New file.
	* guile/scm-utils.c: New file.
	* guile/scm-value.c: New file.
	* guile/lib/gdb.scm: New file.
	* guile/lib/gdb/boot.scm: New file.
	* guile/lib/gdb/experimental.scm: New file.
	* guile/lib/gdb/init.scm: New file.
	* guile/lib/gdb/iterator.scm: New file.
	* guile/lib/gdb/printing.scm: New file.
	* guile/lib/gdb/types.scm: New file.
	* data-directory/Makefile.in (GUILE_SRCDIR): New variable.
	(VPATH): Add $(GUILE_SRCDIR).
	(GUILE_DIR): New variable.
	(GUILE_INSTALL_DIR, GUILE_FILES): New variables.
	(all): Add stamp-guile dependency.
	(stamp-guile): New rule.
	(clean-guile, install-guile, uninstall-guile): New rules.
	(install-only): Add install-guile dependency.
	(uninstall): Add uninstall-guile dependency.
	(clean): Add clean-guile dependency.

2014-02-09  Doug Evans  <xdje42@gmail.com>

	Revert this patch (which I approved, mea culpa).

	2014-02-08  Mark Kettenis  <kettenis@gnu.org>

	* Makefile.in (all-lib): Remove.
	($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.

2014-02-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix Python stack corruption.
	* python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
	gdb_py_longest.

2014-02-08  Mark Kettenis  <kettenis@gnu.org>

	* Makefile.in (all-lib): Remove.
	($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.

2014-02-07  Doug Evans  <dje@google.com>

	* extension-priv.h (extension_language_script_ops): Add comment.
	(extension_language_ops): Add comment.
	(active_ext_lang_state): Fix typo in comment.

2014-02-07  Pedro Alves  <palves@redhat.com>

	* infrun.c (handle_signal_stop) <signal arrives while stepping
	over a breakpoint>: Switch back to the stepping thread.

2014-02-07  Yao Qi  <yao@codesourcery.com>

	* target.c (target_xfer_partial): Return zero if LEN is zero.

2014-02-07  Yao Qi  <yao@codesourcery.com>

	* auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
	(ld_so_xfer_auxv): Likewise.
	* bfd-target.c (target_bfd_xfer_partial): Likewise.
	* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
	* corelow.c (core_xfer_partial): Likewise.
	* ctf.c (ctf_xfer_partial): Likewise.
	* darwin-nat.c (darwin_read_dyld_info): Likewise.
	(darwin_xfer_partial): Likewise.
	* exec.c (exec_xfer_partial): Likewise.
	* gnu-nat.c (gnu_xfer_partial): Likewise.
	* ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
	* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
	* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
	* linux-nat.c (linux_xfer_siginfo): Likewise.
	(linux_proc_xfer_spu): Likewise.
	* procfs.c (procfs_xfer_partial): Likewise.
	* record-full.c (record_full_xfer_partial): Likewise.
	(record_full_core_xfer_partial): Likewise.
	* remote-sim.c (gdbsim_xfer_partial): Likewise.
	* remote.c (remote_write_qxfer): Likewise.
	(remote_write_qxfer, remote_read_qxfer): Likewise.
	(remote_xfer_partial): Likewise.
	* rs6000-nat.c (rs6000_xfer_partial): Likewise.
	(rs6000_xfer_shared_libraries): Likewise.
	* sparc-nat.c (sparc_xfer_wcookie): Likewise.
	* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
	(spu_xfer_partial): Likewise.
	* target.c (memory_xfer_partial_1): Likewise.
	* tracepoint.c (tfile_xfer_partial): Likewise.
	* windows-nat.c (windows_xfer_shared_libraries): Likewise.
	(windows_xfer_partial): Likewise.

2014-02-07  Yao Qi  <yao@codesourcery.com>

	* gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST.  Add
	comments.
	(core_xfer_shared_libraries_aix): Likewise.
	* gdbarch.c, gdbarch.h: Regenerated.
	* i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
	ULONGEST.  Change 'len_avail' type to ULONGEST.
	* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
	* rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
	declaration.
	(rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.

2014-02-07  Yao Qi  <yao@codesourcery.com>

	* corefile.c (memory_error): Get 'exception' from ERR and pass
	'exception' to throw_error.

2014-02-06  Doug Evans  <xdje42@gmail.com>

	* configure.ac (libpython checking): Remove all but python.o from
	CONFIG_OBS.  Remove all but python.c from CONFIG_SRCS.
	* configure: Regenerate.

	* Makefile.in (SFILES): Add extension.c.
	(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
	(COMMON_OBS): Add extension.o.
	* extension.h: New file.
	* extension-priv.h: New file.
	* extension.c: New file.

	* python/python-internal.h: #include "extension.h".
	(gdbpy_auto_load_enabled): Declare.
	(gdbpy_apply_val_pretty_printer): Declare.
	(gdbpy_apply_frame_filter): Declare.
	(gdbpy_preserve_values): Declare.
	(gdbpy_breakpoint_cond_says_stop): Declare.
	(gdbpy_breakpoint_has_cond): Declare.
	(void source_python_script_for_objfile): Delete.
	* python/python.c: #include "extension-priv.h".
	Delete inclusion of "observer.h".
	(extension_language_python): Moved here and renamed from
	script_language_python in py-auto-load.c.
	Redefined to be of type extension_language_defn.
	(python_extension_script_ops): New global.
	(python_extension_ops): New global.
	(struct python_env): New member previous_active.
	(restore_python_env): Call restore_active_ext_lang.
	(ensure_python_env): Call set_active_ext_lang.
	(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
	New arg extlang.
	(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
	New arg extlang.
	(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
	New arg extlang.
	(gdbpy_eval_from_control_command): Renamed from
	eval_python_from_control_command, made static.  New arg extlang.
	(gdbpy_source_script) Renamed from source_python_script, made static.
	New arg extlang.
	(gdbpy_before_prompt_hook): Renamed from before_prompt_hook.  Change
	result to int.  New arg extlang.
	(gdbpy_source_objfile_script): Renamed from
	source_python_script_for_objfile, made static.  New arg extlang.
	(gdbpy_start_type_printers): Renamed from start_type_printers, made
	static.  New args extlang, extlang_printers.  Change result type to
	"void".
	(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
	static.  New arg extlang.  Rename arg printers to extlang_printers
	and change type to ext_lang_type_printers *.
	(gdbpy_free_type_printers): Renamed from free_type_printers, made
	static.  Replace argument arg with extlang, extlang_printers.
	(!HAVE_PYTHON, eval_python_from_control_command): Delete.
	(!HAVE_PYTHON, source_python_script): Delete.
	(!HAVE_PYTHON, gdbpy_should_stop): Delete.
	(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
	(!HAVE_PYTHON, start_type_printers): Delete.
	(!HAVE_PYTHON, apply_type_printers): Delete.
	(!HAVE_PYTHON, free_type_printers): Delete.
	(_initialize_python): Delete call to observer_attach_before_prompt.
	(finalize_python): Set/restore active extension language.
	(gdbpy_finish_initialization) Renamed from
	finish_python_initialization, made static.  New arg extlang.
	(gdbpy_initialized): New function.
	* python/python.h: #include "extension.h".  Delete #include
	"value.h", "mi/mi-cmds.h".
	(extension_language_python): Declare.
	(GDBPY_AUTO_FILE_NAME): Delete.
	(enum py_bt_status): Moved to extension.h and renamed to
	ext_lang_bt_status.
	(enum frame_filter_flags): Moved to extension.h.
	(enum py_frame_args): Moved to extension.h and renamed to
	ext_lang_frame_args.
	(finish_python_initialization): Delete.
	(eval_python_from_control_command): Delete.
	(source_python_script): Delete.
	(apply_val_pretty_printer): Delete.
	(apply_frame_filter): Delete.
	(preserve_python_values): Delete.
	(gdbpy_script_language_defn): Delete.
	(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
	(start_type_printers, apply_type_printers, free_type_printers): Delete.

	* auto-load.c: #include "extension.h".
	(GDB_AUTO_FILE_NAME): Delete.
	(auto_load_gdb_scripts_enabled): Make public.  New arg extlang.
	(script_language_gdb): Delete, moved to extension.c and renamed to
	extension_language_gdb.
	(source_gdb_script_for_objfile): Delete.
	(auto_load_pspace_info): New member unsupported_script_warning_printed.
	(loaded_script): Change type of language member to
	struct extension_language_defn *.
	(init_loaded_scripts_info): Initialize
	unsupported_script_warning_printed.
	(maybe_add_script): Make static.  Change type of language arg to
	struct extension_language_defn *.
	(clear_section_scripts): Reset unsupported_script_warning_printed.
	(auto_load_objfile_script_1): Rewrite to use extension language API.
	(auto_load_objfile_script): Make public.  Remove support-compiled-in
	and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
	(source_section_scripts): Rewrite to use extension language API.
	(load_auto_scripts_for_objfile): Rewrite to use
	auto_load_scripts_for_objfile.
	(collect_matching_scripts_data): Change type of language member to
	struct extension_language_defn *.
	(auto_load_info_scripts): Change type of language arg to
	struct extension_language_defn *.
	(unsupported_script_warning_print): New function.
	(script_not_found_warning_print): Make static.
	(_initialize_auto_load): Rewrite construction of scripts-directory
	help.
	* auto-load.h (struct objfile): Add forward decl.
	(struct script_language): Delete.
	(struct auto_load_pspace_info): Add forward decl.
	(struct extension_language_defn): Add forward decl.
	(maybe_add_script): Delete.
	(auto_load_objfile_script): Declare.
	(script_not_found_warning_print): Delete.
	(auto_load_info_scripts): Update prototype.
	(auto_load_gdb_scripts_enabled): Declare.
	* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
	auto_load_python_scripts_enabled and made public.
	(script_language_python): Delete, moved to python.c.
	(gdbpy_script_language_defn): Delete.
	(info_auto_load_python_scripts): Update to use
	extension_language_python.

	* breakpoint.c (condition_command): Replace call to
	gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
	(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
	with call to breakpoint_ext_lang_cond_says_stop.
	* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
	from gdbpy_should_stop.  Change result type to enum scr_bp_stop.
	New arg slang.  Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
	(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
	New arg slang.
	(local_setattro): Print name of extension language with existing
	stop condition.

	* valprint.c (val_print, value_print): Update to call
	apply_ext_lang_val_pretty_printer.
	* cp-valprint.c (cp_print_value): Update call to
	apply_ext_lang_val_pretty_printer.
	* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
	(gdbpy_apply_val_pretty_printer): Renamed from
	apply_val_pretty_printer.  New arg extlang.
	(!HAVE_PYTHON, apply_val_pretty_printer): Delete.

	* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
	extension language API.
	* cli/cli-script.c (execute_control_command): Update to call
	eval_ext_lang_from_control_command.

	* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
	enum ext_lang_bt_status values.  Update call to
	apply_ext_lang_frame_filter.
	(mi_cmd_stack_list_locals): Ditto.
	(mi_cmd_stack_list_args): Ditto.
	(mi_cmd_stack_list_variables): Ditto.
	* mi/mi-main.c: Delete #include "python/python-internal.h".
	Add #include "extension.h".
	(mi_cmd_list_features): Replace reference to python internal variable
	gdb_python_initialized with call to ext_lang_initialized_p.

	* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
	Update to use enum ext_lang_frame_args.  Update to call
	apply_ext_lang_frame_filter.
	* python/py-framefilter.c (extract_sym): Update to use enum
	ext_lang_bt_status.
	(extract_value, py_print_type, py_print_value): Ditto.
	(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
	(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
	(py_print_frame): Ditto.
	(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
	New arg extlang.  Update to use enum ext_lang_bt_status.

	* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
	finish_python_initialization.  Replace with call to
	finish_ext_lang_initialization.

	* typeprint.c (do_free_global_table): Update to call
	free_ext_lang_type_printers.
	(create_global_typedef_table): Update to call
	start_ext_lang_type_printers.
	(find_global_typedef): Update to call apply_ext_lang_type_printers.
	* typeprint.h (struct ext_lang_type_printers): Add forward decl.
	(type_print_options): Change type of global_printers from "void *"
	to "struct ext_lang_type_printers *".

	* value.c (preserve_values): Update to call preserve_ext_lang_values.
	* python/py-value.c: Remove #ifdef HAVE_PYTHON.
	(gdbpy_preserve_values): Renamed from preserve_python_values.
	New arg extlang.
	(!HAVE_PYTHON, preserve_python_values): Delete.

	* utils.c (quit_flag): Delete, moved to extension.c.
	(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
	extension.c.

	* eval.c: Delete #include "python/python.h".
	* main.c: Delete #include "python/python.h".

	* defs.h: Update comment.

2014-02-06  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.7 released.

2014-02-05  Mark Kettenis  <kettenis@gnu.org>

	* c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
	defined.

2014-02-05  Yao Qi  <yao@codesourcery.com>

	* remote.c (remote_pass_signals): Remove local 'buf' and use
	rs->buf.
	(remote_program_signals): Likewise.

2014-02-05  Yao Qi  <yao@codesourcery.com>

	* ctf.c: Include "inferior.h" and "gdbthread.h".
	(CTF_PID): A new macro.
	(ctf_open): Call inferior_appeared and add_thread_silent.
	(ctf_close): Call exit_inferior_silent and set inferior_ptid.
	(ctf_thread_alive): New function.
	(init_ctf_ops): Install ctf_thread_alive to to_thread_alive.

2014-02-05  Yao Qi  <yao@codesourcery.com>

	Revert this patch:

	2013-05-24  Yao Qi  <yao@codesourcery.com>

	* tracepoint.c (TFILE_PID): Remove.
	(tfile_open): Don't add thread and inferior.
	(tfile_close): Don't set 'inferior_ptid'.  Don't call
	exit_inferior_silent.
	(tfile_thread_alive): Remove.
	(init_tfile_ops): Don't set field 'to_thread_alive' of
	tfile_ops.

2014-02-04  Christian Eggers  <ceggers@gmx.de>  (tiny change)

	* remote.c (remote_start_remote): Call remote_check_symbols even
	if only symbol-file (not file) has been given.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* gdbarch.sh (skip_entrypoint): New callback.
	* gdbarch.c, gdbarch.h: Regenerate.
	* symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
	* infrun.c (fill_in_stop_func): Likewise.
	* ppc-linux-tdep.c: Include "elf/ppc64.h".
	(ppc_elfv2_elf_make_msymbol_special): New function.
	(ppc_elfv2_skip_entrypoint): Likewise.
	(ppc_linux_init_abi): Install them for ELFv2.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
	(ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
	(ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
	(ppc64_sysv_abi_return_value): Likewise.  Also, handle small
	structures returned in GPRs.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
	offset to the stack parameter list for the ELFv2 ABI.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-linux-tdep.c (ppc_linux_init_abi): Only call
	set_gdbarch_convert_from_func_ptr_addr and
	set_gdbarch_elf_make_msymbol_special for ELFv1.
	* ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
	function descriptors on ELFv1.
	(ppc64_sysv_abi_push_dummy_call): Likewise.  On ELFv2,
	set up r12 at function entry.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-tdep.h (enum powerpc_elf_abi): New data type.
	(struct gdbarch_tdep): New member elf_abi.

	* rs6000-tdep.c: Include "elf/ppc64.h".
	(rs6000_gdbarch_init): Detect ELF ABI version.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
	within a register pair holding a DFP 128-bit value on little-endian.
	(ppc64_sysv_abi_return_value_base): Likewise.
	* rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
	(dfp_pseudo_register_write): Likewise.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
	offset on little-endian when passing _Decimal32.
	(ppc64_sysv_abi_return_value_base): Likewise for return values.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
	of the overlapped FP register within the VSX register on little-
	endian platforms.
	(efpr_pseudo_register_write): Likewise.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
	offset on little-endian when passing small structures.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
	(struct ppc64_sysv_argpos): New data structure.
	(ppc64_sysv_abi_push_float): Remove.
	(ppc64_sysv_abi_push_val): New function.
	(ppc64_sysv_abi_push_integer): Likewise.
	(ppc64_sysv_abi_push_freg): Likewise.
	(ppc64_sysv_abi_push_vreg): Likewise.
	(ppc64_sysv_abi_push_param): Likewise.
	(ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
	(ppc64_sysv_abi_return_value_base): New function.
	(ppc64_sysv_abi_return_value): Refactor to use it.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

	* NEWS: Document new target powerpc64le-*-linux*.

2014-02-04  Mark Kettenis  <kettenis@gnu.org>

	* sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
	(sparc64obsd_supply_gregset): Handle registers sets used in ELF
	core dumps.
	(sparc64obsd_init_abi): Adjust minimum size of the general purpose
	register set used in ELF core dumps.  Add floating-point register set.

2014-02-03  Kevin Buettner  <kevinb@redhat.com>

	* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite 
	dwarf2_to_gdb[] table using symbolic constants.  Adjust
	penultimate entry from number representing the PC register
	to symbolic constant representing the MDR register.  Add
	constant for the PC register to the end of the table.

2014-02-03  Mark Kettenis  <kettenis@gnu.org>

	* bsd-kvm.c: Include <sys/param.h>

2014-02-03  Mark Kettenis  <kettenis@gnu.org>

	* sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.

2014-01-31  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.h (clear_ada_sym_cache): Delete.

2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>

	* auxv.c (fprint_target_auxv): Handle AT_HWCAP2.

2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
          the sigreturn register save area only if the syscall is
          sigreturn.

2014-01-29  Joel Brobecker  <brobecker@adacore.com>

	* valops.c (value_slice): Minor reformatting.

2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.

2014-01-28  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
	New static globals.
	(maint_set_ada_cmd, maint_show_ada_cmd): New functions.
	(ada_ignore_descriptive_types_p): New static global.
	(find_parallel_type_by_descriptive_type): Return immediately
	if ada_ignore_descriptive_types_p is set.
	(_initialize_ada_language): Register new commands "maintenance
	set ada", "maintenance show ada", "maintenance set ada
	ignore-descriptive-types" and "maintenance show ada
	ignore-descriptive-types".
	* NEWS: Add entry for new "maint ada set/show
	ignore-descriptive-types" commands.

2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_close): Call btrace_teardown
	for all threads.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c: Remove "#ifdef UI_OUT" condition for including
	"ui-out.h".

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

	* ada-typeprint (type_is_full_subrange_of_target_type):
	New function.
	(print_range): Add parameter bounds_prefered_p.  If not set,
	try printing range types using the name of their base type.
	(print_range_type): Add parameter bounds_prefered_p.
	Use it in call to print_range.
	(print_array_type, ada_print_type): Update calls to print_range
	and print_range_type.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

	* ada-typeprint.c (print_array_type, print_choices, print_range)
	(print_range_bound, print_dynamic_range_bound, print_range_type):
	Remove declaration.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

	* ada-typeprint.c (print_range): Add missing empty line
	after local declaration.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (print_optional_low_bound): Get index_type's
	target type for as long as it is a TYPE_CODE_RANGE.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

	* procfs.c (procfs_make_note_section): Remove assertion and
	associated comment.

2014-01-24  Yao Qi  <yao@codesourcery.com>

	* remote.c (remote_read_bytes): Change type of len to ULONGEST.
	* corelow.c (get_core_siginfo): Likewise.

2014-01-24  Yao Qi  <yao@codesourcery.com>

	* remote.c (remote_write_bytes_aux): Change type of 'len' to
	ULONGEST.  Don't check 'len' is negative.
	(remote_write_bytes):  Change type of 'len' to ULONGEST.

2014-01-23  Tom Tromey  <tromey@redhat.com>

	PR python/16485:
	* python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
	Handle exception from frame.block.
	(FrameVars.fetch_frame_locals): Likewise.

2014-01-23  Tom Tromey  <tromey@redhat.com>

	PR python/16487:
	* python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
	on a NULL pointer.  Move "goto error" to correct place.

2014-01-23  Tom Tromey  <tromey@redhat.com>

	PR python/16491:
	* python/py-framefilter.c (apply_frame_filter): Call
	ensure_python_env after computing gdbarch.

2014-01-23  Yao Qi  <yao@codesourcery.com>

	* target.c (raw_memory_xfer_partial): Change argument type
	from void * to gdb_byte *.
	(memory_xfer_partial_1, memory_xfer_partial): Likewise.

2014-01-22  Doug Evans  <dje@google.com>

	New gdbserver option --debug-format=timestamp.
	* NEWS: Mention it.

2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>

	* syscalls/s390x-linux.xml: New file.
	* syscalls/s390-linux.xml: New file.
	* s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
	(XML_SYSCALL_FILENAME_S390X): Likewise.
	(op_svc): New enum value for SVC opcode.
	(s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
	(s390_linux_get_syscall_number): New function.
	(s390_gdbarch_init): Register '*get_syscall_number' and the
	syscall xml file name.
	* data-directory/Makefile.in (SYSCALLS_FILES): Add
	"s390-linux.xml" and "s390x-linux.xml".
	* NEWS: Announce new feature.

2014-01-22  Baruch Siach  <baruch@tkos.co.il>

	* xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.

2014-01-22  Pedro Alves  <palves@redhat.com>

	* xtensa-config.c: Include defs.h.

2014-01-22  Joel Brobecker  <brobecker@adacore.com>

	* common/common-utils.h: Add "ARI:" comment beside __func__
	reference.

2014-01-22  Joel Brobecker  <brobecker@adacore.com>

	* common/common-utils.h (FUNCTION_NAME): Expand the macro's
	documentation a bit.

2014-01-21  Roland McGrath  <mcgrathr@google.com>

	* configure.ac: Call AM_PROG_INSTALL_STRIP.
	* configure: Regenerate.
	* aclocal.m4: Regenerate.
	* Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
	New substituted	variables.
	(install-strip): New target.
	(INSTALL_SCRIPT): New substituted variable.
	(FLAGS_TO_PASS): Add it.
	(install-only): Use $(INSTALL_SCRIPT) rather than
	$(INSTALL_PROGRAM) for gcore.

2014-01-20  Tom Tromey  <tromey@redhat.com>

	* cli/cli-decode.h (struct cmd_list_element): Move all bitfields
	together.

2014-01-20  Tom Tromey  <tromey@redhat.com>

	* cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
	(add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
	(deprecated_cmd_warning, complete_on_cmdlist): Update.
	* cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
	(MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
	(struct cmd_list_element) <flags>: Remove.
	<cmd_deprecated, deprecated_warn_user, malloced_replacement,
	doc_allocated>: New fields.
	<hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
	bitfields.
	* maint.c (maintenance_do_deprecate): Update.
	* top.c (execute_command): Update.

2014-01-20  Baruch Siach  <baruch@tkos.co.il>

	* xtensa-linux-nat.c: Include asm/ptrace.h.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

	* Makefile.in (SFILES): Add d-support.c.
	(COMMON_OBS): Add d-support.o.
	* d-lang.h (d_parse_symbol): Add comment, now defined in
	d-support.c.
	* d-lang.c (parse_call_convention)
	(parse_attributes, parse_function_types)
	(parse_function_args, parse_type, parse_identifier)
	(call_convention_p, d_parse_symbol): Move functions to ...
	* d-support.c: ... New file.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-lang.h (d_parse_symbol): Add declaration.
	* d-lang.c (extract_identifiers)
	(extract_type_info): Remove functions.
	(parse_call_convention, parse_attributes)
	(parse_function_types, parse_function_args)
	(parse_type, parse_identifier, call_convention_p)
	(d_parse_symbol): New functions.
	(d_demangle): Use d_parse_symbol to demangle D symbols.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-lang.h (struct builtin_d_type): New data type.
	(builtin_d_type): Add declaration.
	* d-lang.c (d_language_arch_info, build_d_types)
	(builtin_d_type): New functions.
	(enum d_primitive_types): New data type.
	(d_language_defn): Change c_language_arch_info to
	d_language_arch_info.
	(d_type_data): New static variable.
	(_initialize_d_language): Initialize d_type_data.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-lang.h (d_main_name): Add declaration.
	* d-lang.c (d_main_name): New function.
	* symtab.c (find_main_name): Add call to d_main_name.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-lang.c (d_language_defn): Change macro_expansion_c to
	macro_expansion_no.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

	* MAINTAINERS: Add myself as a write-after-approval maintainer.

2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>

	* breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
	gdb_exception" declaration.
	* remote.c (getpkt_or_notif_sane): Likewise.

2014-01-17  Doug Evans  <dje@google.com>

	* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
	function, contents of dirnames_to_char_ptr_vec_append moved here.
	(delim_string_to_char_ptr_vec): New function.
	(dirnames_to_char_ptr_vec_append): Rewrite.
	* common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.

2014-01-17  Doug Evans  <dje@google.com>

	* common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
	and moved here ...
	* common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
	#include "common-utils.h".
	(gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
	* common/vec.h (VEC_ASSERT_PASS): Update.
	* darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
	(MACH_CHECK_ERROR): Update.

2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>

	* gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
	comments.
	* gdbarch.h: Regenerate.

2014-01-16  Tom Tromey  <tromey@redhat.com>

	* value.c (struct value) <regnum>: Move earlier.

2014-01-16  Tom Tromey  <tromey@redhat.com>

	* remote.c (extended_remote_create_inferior): Rename from
	extended_remote_create_inferior_1.  Add "ops" argument.  Remove
	old implementation.

2014-01-16  Pedro Alves  <palves@redhat.com>

	* s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
	NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
	the backchain.

2014-01-16  Doug Evans  <dje@google.com>

	* dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.h (btrace_thread_flag): New.
	(struct btrace_thread_info) <flags>: New.
	* record-btrace.c (record_btrace_resume_thread)
	(record_btrace_find_thread_to_move, btrace_step_no_history)
	(btrace_step_stopped, record_btrace_start_replaying)
	(record_btrace_step_thread, record_btrace_decr_pc_after_break)
	(record_btrace_find_resume_thread): New.
	(record_btrace_resume, record_btrace_wait): Extend.
	(record_btrace_can_execute_reverse): New.
	(record_btrace_open): Fail in non-stop mode.
	(record_btrace_set_replay): Split into this, ...
	(record_btrace_stop_replaying): ... this, ...
	(record_btrace_clear_histories): ... and this.
	(init_record_btrace_ops): Init to_can_execute_reverse.
	* NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* target.h (struct target_ops) <to_decr_pc_after_break>: New.
	(forward_target_decr_pc_after_break)
	(target_decr_pc_after_break): New.
	* target.c (forward_target_decr_pc_after_break)
	(target_decr_pc_after_break): New.
	* aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
	instead of gdbarch_decr_pc_after_break.
	* darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
	instead of gdbarch_decr_pc_after_break.
	* infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
	instead of gdbarch_decr_pc_after_break.
	* linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
	instead of gdbarch_decr_pc_after_break.
	* linux-thread-db.c (check_event): Call target_decr_pc_after_break
	instead of gdbarch_decr_pc_after_break.
	* record-full.c (record_full_wait_1): Call target_decr_pc_after_break
	instead of gdbarch_decr_pc_after_break.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c: Include regcache.h.
	(btrace_add_pc): New.
	(btrace_enable): Call btrace_add_pc.
	(btrace_is_empty): New.
	* btrace.h (btrace_is_empty): New.
	* record-btrace.c (require_btrace, record_btrace_info): Call
	btrace_is_empty.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
	Support delta reads.
	(linux_disable_btrace): Change return type.
	* common/linux-btrace.h (linux_read_btrace): Change parameters
	and return type to allow error reporting.  Update users.
	(linux_disable_btrace): Change return type.  Update users.
	* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
	New.
	(btrace_error): New.
	(btrace_block) <begin>: Comment on BEGIN == 0.
	* btrace.c (btrace_compute_ftrace): Start from the end of
	the current trace.
	(btrace_stitch_trace, btrace_clear_history): New.
	(btrace_fetch): Read delta trace, return if replaying.
	(btrace_clear): Move clear history code to btrace_clear_history.
	(parse_xml_btrace): Throw an error if parsing failed.
	* target.h (struct target_ops) <to_read_btrace>: Change parameters
	and return type to allow error reporting.
	(target_read_btrace): Change parameters and return type to allow
	error reporting.
	* target.c (target_read_btrace): Update.
	* remote.c (remote_read_btrace): Support delta reads.  Pass
	errors on.
	* NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record.h (record_btrace_frame_unwind)
	(record_btrace_tailcall_frame_unwind): New declarations.
	* dwarf2-frame: Include record.h
	(dwarf2_frame_cfa): Throw an error for btrace frames.
	* record-btrace.c: Include hashtab.h.
	(btrace_get_bfun_name): New.
	(btrace_call_history): Call btrace_get_bfun_name.
	(struct btrace_frame_cache): New.
	(bfcache): New.
	(bfcache_hash, bfcache_eq, bfcache_new): New.
	(btrace_get_frame_function): New.
	(record_btrace_frame_unwind_stop_reason): Allow unwinding.
	(record_btrace_frame_this_id): Compute own id.
	(record_btrace_frame_prev_register): Provide PC, throw_error
	for all other registers.
	(record_btrace_frame_sniffer): Detect btrace frames.
	(record_btrace_tailcall_frame_sniffer): New.
	(record_btrace_frame_dealloc_cache): New.
	(record_btrace_frame_unwind): Add new functions.
	(record_btrace_tailcall_frame_unwind): New.
	(_initialize_record_btrace): Allocate cache.
	* btrace.c (btrace_clear): Call reinit_frame_cache.
	* NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_set_replay)
	(record_btrace_goto_begin, record_btrace_goto_end)
	(record_btrace_goto): New.
	(init_record_btrace_ops): Initialize them.
	* NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_find_new_threads)
	(record_btrace_thread_alive): New.
	(init_record_btrace_ops): Initialize to_find_new_threads and
	to_thread_alive.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_resume): New.
	(record_btrace_wait): New.
	(init_record_btrace_ops): Initialize to_wait and to_resume.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_xfer_partial)
	(record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
	(record_btrace_allow_memory_access): New.
	(init_record_btrace_ops): Initialize new methods.
	* target.c (raw_memory_xfer_partial): Bail out if target reports
	that this memory is not available.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* target.h (target_ops) <to_insert_breakpoint>
	<to_remove_breakpoint>: Add target_ops parameter.
	(forward_target_insert_breakpoint): New.
	(forward_target_remove_breakpoint): New.
	(memory_remove_breakpoint, memory_insert_breakpoint):
	Add target_ops parameter.
	* target.c (target_insert_breakpoint): Split into this and ...
	(forward_target_insert_breakpoint): ... this.
	(target_remove_breakpoint): Split into this and ...
	(forward_target_remove_breakpoint): ... this.
	(debug_to_insert_breakpoint): Add target_ops parameter.
	Call forward_target_insert_breakpoint.
	(debug_to_remove_breakpoint): Add target_ops parameter.
	Call forward_target_remove_breakpoint.
	(update_current_target): Do not inherit or default to_insert_breakpoint
	and to_remove_breakpoint.
	* corelow.c (ignore): Add target_ops parameter.
	* exec.c (ignore): Add target_ops parameter.
	* mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
	Add target_ops parameter.
	* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
	Add target_ops parameter.
	* nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
	Add target_ops parameter.
	* record-full.c (record_full_beneath_to_insert_breakpoint)
	(record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
	(tmp_to_remove_breakpoint, record_full_insert_breakpoint)
	(record_full_remove_breakpoint, record_full_core_insert_breakpoint)
	(record_full_core_remove_breakpoint): Add target_ops parameter.
	Update users.
	(record_full_beneath_to_insert_breakpoint_ops)
	(record_full_beneath_to_remove_breakpoint_ops)
	(tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
	(record_full_open): Initialize tmp_to_insert_breakpoint_ops,
	tmp_to_remove_breakpoint_ops,
	record_full_beneath_to_insert_breakpoint_ops, and
	record_full_beneath_to_remove_breakpoint_ops.
	* remote-m32r-sdi.c (m32r_insert_breakpoint)
	(m32r_remove_breakpoint): Add target_ops parameter.
	* remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
	Add target_ops parameter.
	* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
	Add target_ops parameter.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c: Include frame-unwind.h.
	(record_btrace_frame_unwind_stop_reason)
	(record_btrace_frame_this_id, record_btrace_frame_prev_register)
	(record_btrace_frame_sniffer, record_btrace_frame_unwind):
	New.
	(init_record_btrace_ops): Install it.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* frame.c (get_frame_unwind_stop_reason): Unconditionally call
	get_prev_frame_1.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
	earlier.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* frame-unwind.c: Include target.h.
	(frame_unwind_try_unwinder): New function with code from ...
	(frame_unwind_find_by_frame): ... here.  New variable
	unwinder_from_target, call also target_get_unwinder)
	(target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
	* target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
	* target.h (struct target_ops): New fields to_get_unwinder and
	to_get_tailcall_unwinder.
	(target_get_unwinder, target_get_tailcall_unwinder): New declarations.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_fetch_registers)
	(record_btrace_store_registers)
	(record_btrace_to_prepare_to_store): New.
	(init_record_btrace_ops): Add the above.

2014-01-16  Tom Tromey  <tromey@redhat.com>

	* windows-nat.c (windows_prepare_to_store): Add 'self' argument.
	* target.h (struct target_ops) <to_prepare_to_store>: Add
	argument.
	(target_prepare_to_store): Add argument.
	* target.c (debug_to_prepare_to_store): Add argument.
	(update_current_target): Update.
	* remote.c (remote_prepare_to_store): Add 'self' argument.
	* remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
	* remote-mips.c (mips_prepare_to_store): Add 'self' argument.
	* remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
	* record-full.c (record_full_core_prepare_to_store): Add 'self'
	argument.
	* ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
	* nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
	* monitor.c (monitor_prepare_to_store): Add 'self' argument.
	* inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
	* go32-nat.c (go32_prepare_to_store): Add 'self' argument.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.h (replay) <replay>: New.
	(btrace_is_replaying): New.
	* btrace.c (btrace_clear): Free replay iterator.
	(btrace_is_replaying): New.
	* record-btrace.c (record_btrace_is_replaying): New.
	(record_btrace_info): Print insn number if replaying.
	(record_btrace_insn_history): Start at replay position.
	(record_btrace_call_history): Start at replay position.
	(init_record_btrace_ops): Init to_record_is_replaying.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_insn_history_range): Include
	end.
	(record_btrace_insn_history_from): Adjust range.
	(record_btrace_call_history_range): Include
	end.
	(record_btrace_call_history_from): Adjust range.
	* NEWS: Announce changes.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record.h (enum record_print_flag)
	<record_print_indent_calls>: New.
	* record.c (get_call_history_modifiers): Recognize /c modifier.
	(_initialize_record): Document /c modifier.
	* record-btrace.c (btrace_call_history): Add btinfo parameter.
	Reorder fields.  Optionally indent the function name.  Update
	all users.
	* NEWS: Announce changes.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (ftrace_new_function): Start counting at one.
	* record-btrace.c (record_btrace_info): Adjust number of calls
	and insns.
	* NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (btrace_call_history_insn_range): Print
	insn range as [begin, end].

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.h (struct btrace_func_link): New.
	(enum btrace_function_flag): New.
	(struct btrace_inst): Rename to ...
	(struct btrace_insn): ...this. Update all users.
	(struct btrace_func) <ibegin, iend>: Remove.
	(struct btrace_func_link): New.
	(struct btrace_func): Rename to ...
	(struct btrace_function): ...this. Update all users.
	(struct btrace_function) <segment, flow, up, insn, insn_offset)
	(number, level, flags>: New.
	(struct btrace_insn_iterator): Rename to ...
	(struct btrace_insn_history): ...this.
	Update all users.
	(struct btrace_insn_iterator, btrace_call_iterator): New.
	(struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
	(struct btrace_target_info) <begin, end, level>
	<insn_history, call_history>: New.
	(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
	(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
	(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
	(btrace_call_number, btrace_call_begin, btrace_call_end)
	(btrace_call_prev, btrace_call_next, btrace_call_cmp)
	(btrace_find_function_by_number, btrace_set_insn_history)
	(btrace_set_call_history): New.
	* btrace.c (btrace_init_insn_iterator)
	(btrace_init_func_iterator, compute_itrace): Remove.
	(ftrace_print_function_name, ftrace_print_filename)
	(ftrace_skip_file): Change
	parameter to const.
	(ftrace_init_func): Remove.
	(ftrace_debug): Use new btrace_function fields.
	(ftrace_function_switched): Also consider gaining and
	losing symbol information).
	(ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
	(ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
	(ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
	New.
	(ftrace_new_function): Move. Remove debug print.
	(ftrace_update_lines, ftrace_update_insns): New.
	(ftrace_update_function): Check for call, ret, and jump.
	(compute_ftrace): Renamed to ...
	(btrace_compute_ftrace): ...this. Rewritten to compute call
	stack.
	(btrace_fetch, btrace_clear): Updated.
	(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
	(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
	(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
	(btrace_call_number, btrace_call_begin, btrace_call_end)
	(btrace_call_prev, btrace_call_next, btrace_call_cmp)
	(btrace_find_function_by_number, btrace_set_insn_history)
	(btrace_set_call_history): New.
	* record-btrace.c (require_btrace): Use new btrace thread
	info fields.
	(record_btrace_info, btrace_insn_history)
	(record_btrace_insn_history, record_btrace_insn_history_range):
	Use new btrace thread info fields and new iterator.
	(btrace_func_history_src_line): Rename to ...
	(btrace_call_history_src_line): ...this. Use new btrace
	thread info fields.
	(btrace_func_history): Rename to ...
	(btrace_call_history): ...this. Use new btrace thread info
	fields and new iterator.
	(record_btrace_call_history, record_btrace_call_history_range):
	Use new btrace thread info fields and new iterator.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* frame.h (frame_id_build_unavailable_stack_special): New.
	* frame.c (frame_id_build_unavailable_stack_special): New.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
	(amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
	(amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
	to gdbarch.
	* i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
	(i386_insn_is_jump, i386_jmp_p): New.
	(i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
	insn_is_jump to gdbarch.
	* gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
	* gdbarch.h: Regenerated.
	* gdbarch.c: Regenerated.
	* arch-utils.h (default_insn_is_call, default_insn_is_ret)
	(default_insn_is_jump): New.
	* arch-utils.c (default_insn_is_call, default_insn_is_ret)
	(default_insn_is_jump): New.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* common/btrace-common.h (btrace_read_type) <btrace_read_all>:
	Change to ...
	(btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
	(btrace_read_type) <btrace_read_new>: Change to ...
	(btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* common/linux-btrace.c (linux_read_btrace): Free trace from
	previous iteration.

2014-01-15  Doug Evans  <dje@google.com>

	* dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
	uint32_t.

2014-01-15  Tom Tromey  <tromey@redhat.com>

	* dbxread.c (process_one_symbol): Use set_objfile_main_name.
	* dwarf2read.c (read_partial_die): Use set_objfile_main_name.
	* objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
	(set_objfile_main_name): New function.
	* objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
	language_of_main>: New fields.
	(set_objfile_main_name): Declare.
	* symtab.c (find_main_name): Loop over objfiles to find the main
	name and language.
	(set_main_name): Now static.
	(get_main_info): Add comment.
	* symtab.h (set_main_name): Don't declare.

2014-01-15  Tom Tromey  <tromey@redhat.com>

	* symtab.c (main_progspace_key): New global.
	(struct main_info): New.
	(name_of_main, language_of_main): Remove.
	(get_main_info, main_info_cleanup): New function.
	(set_main_name, main_name, main_language): Use get_main_info.
	(_initialize_symtab): Initialize main_progspace_key.

2014-01-15  Tom Tromey  <tromey@redhat.com>

	* dbxread.c (process_one_symbol): Update.
	* dwarf2read.c (read_partial_die): Update.
	* symfile.c (set_initial_language): Call main_language.
	* symtab.c (language_of_main): Now static.
	(set_main_name): Add 'lang' parameter.
	(find_main_name): Update.
	(main_language): New function.
	(symtab_observer_executable_changed): Update.
	* symtab.h (set_main_name): Update.
	(language_of_main): Remove.
	(main_language): Declare.

2014-01-15  Tom Tromey  <tromey@redhat.com>

	* symfile.c (init_entry_point_info): Use new "initialized" field.
	Update.
	* objfiles.h (struct entry_point) <initialized>: New field.
	(struct objfile_per_bfd_storage) <ei>: New field, moved from...
	(struct objfile) <ei>: ...here.  Remove.
	* objfiles.c (entry_point_address_query): Update.

2014-01-15  Tom Tromey  <tromey@redhat.com>

	* objfiles.c (entry_point_address_query): Relocate entry point
	address.
	(objfile_relocate1): Do not relocate entry point address.
	* objfiles.h (struct entry_info) <entry_point>: Update comment.
	<the_bfd_section_index>: New field.
	* symfile.c (init_entry_point_info): Find the entry point's
	section.

2014-01-15  Tom Tromey  <tromey@redhat.com>

	* solib-frv.c (enable_break): Use entry_point_address_query.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

	* NEWS: Add note on improved process record-replay on
	arm*-linux* targets.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

	* arm-tdep.c (enum arm_record_result): New enum.
	(arm_record_unsupported_insn): New function.
	(arm_record_coproc_data_proc): Removed.
	(thumb2_record_ld_st_multiple): New function.
	(thumb2_record_ld_st_dual_ex_tbb): New function.
	(thumb2_record_data_proc_sreg_mimm): New function.
	(thumb2_record_ps_dest_generic): New function.
	(thumb2_record_branch_misc_cntrl): New function.
	(thumb2_record_str_single_data): New function.
	(thumb2_record_ld_mem_hints): New function.
	(thumb2_record_ld_word): New function.
	(thumb2_record_lmul_lmla_div): New function.
	(thumb2_record_decode_insn_handler): New function.
	(decode_insn): Add thumb32 instruction handlers.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

	* arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
	(struct arm_linux_record_tdep): Declare.
	(arm_canonicalize_syscall): New function.
	(arm_all_but_pc_registers_record): New function.
	(arm_linux_syscall_record): New function.
	(arm_linux_init_abi): Add syscall recording constructs.
	* arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
	decoding.  (arm_record_coproc_data_proc): Update arm syscall
	decoding.
	* arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
	<arm_syscall_record>: New field.
	* configure.tgt (arm*-*-linux*): Add linux-record.o to
	gdb_target_obs.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

	* arm-tdep.c (thumb_record_misc): Update to use sp as base
	register for push instruction recording.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

	* arm-tdep.c (thumb_record_misc): Update to correct logical
	error while recording ldm, ldmia and pop instructions.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

	* arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.

2014-01-15  Pedro Alves  <palves@redhat.com>

	* go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
	(go32_resume, go32_fetch_registers, store_register)
	(go32_store_registers, go32_prepare_to_store)
	(go32_xfer_memory, go32_files_info, go32_kill_inferior)
	(go32_create_inferior, go32_can_run, go32_terminal_init)
	(go32_terminal_inferior, go32_terminal_ours): Delete forward
	declarations.

2014-01-15  Tom Tromey  <tromey@redhat.com>

	* target.h (async_callback_ftype): New typedef.
	(struct target_ops) <to_async>: Use it.

2014-01-15  Joel Brobecker  <brobecker@adacore.com>

	* python/py-value.c (get_field_type): Remove unnecessary curly
	braces for single-statement if block.

2014-01-15  Joel Brobecker  <brobecker@adacore.com>

	* python/py-type.c (convert_field): Add missing empty line
	after declarations.

2014-01-14  Doug Evans  <dje@google.com>

	* symfile.h (expand_symtabs_matching): Renamed from
	expand_partial_symbol_names.  Update prototype.
	(map_symbol_filenames): Renamed from map_partial_symbol_filenames.
	* symfile.c (expand_symtabs_matching): Renamed from
	expand_partial_symbol_names.  New args file_matcher, kind.
	Rename arg fun to symbol_matcher.
	(map_symbol_filenames): Renamed from map_partial_symbol_filenames.
	* ada-lang.c (ada_complete_symbol_matcher): Renamed from
	ada_expand_partial_symbol_name.
	(ada_make_symbol_completion_list): Update to call
	expand_symtabs_matching.
	(ada_add_global_exceptions): Call expand_symtabs_matching.
	* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
	call map_symbol_filenames.
	* symtab.c (sources_info): Update to call map_symbol_filenames.
	(search_symbols): Call expand_symtabs_matching.
	(symbol_completion_matcher): Renamed from expand_partial_symbol_name.
	(default_make_symbol_completion_list_break_on): Update to call
	expand_symtabs_matching.
	(make_source_files_completion_list): Update to call
	map_symbol_filenames.

2014-01-14  Doug Evans  <dje@google.com>

	* symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
	(expand_symtabs_symbol_matcher_ftype): New typedef.
	(quick_symbol_functions.expand_symtabs_matching): Update to use.
	expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
	* symfile.c (expand_partial_symbol_names): Update to use
	expand_symtabs_symbol_matcher_ftype.
	* dwarf2read.c (dw2_expand_symtabs_matching): Update to use
	expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
	Arg name_matcher renamed to symbol_matcher.
	* psymtab.c (recursively_search_psymtabs): Update to use
	expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
	sym_matcher.
	(expand_symtabs_matching_via_partial): Update to use
	expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
	Arg name_matcher renamed to symbol_matcher.

2014-01-14  Doug Evans  <dje@google.com>

	* psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
	(map_partial_symbol_filenames): Ditto.
	* psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
	(map_partial_symbol_filenames): Ditto.
	* symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
	(map_partial_symbol_filenames): Ditto.
	* symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
	(map_partial_symbol_filenames): Ditto.
	* symtab.c: Delete #include "psymtab.h".

2014-01-14  Pedro Alves  <palves@redhat.com>
	    Tom Tromey  <tromey@redhat.com>

	* infrun.c (use_displaced_stepping): Use find_record_target
	instead of RECORD_IS_USED.
	(adjust_pc_after_break): Use record_full_is_used instead of
	RECORD_IS_USED.
	* record-btrace.c (record_btrace_open): Call record_preopen
	instead of checking RECORD_IS_USED.
	* record-full.c (record_full_shortname)
	(record_full_core_shortname): New globals.
	(record_full_is_used): New function.
	(find_full_open): Call record_preopen instead of checking
	RECORD_IS_USED.
	(init_record_full_ops): Set the target's shortname to
	record_full_shortname.
	(init_record_full_core_ops): Set the target's shortname to
	record_full_core_shortname.
	* record-full.h (record_full_is_used): Declare.
	* record.c (find_record_target): Make extern.
	(record_preopen): New function.
	* record.h (RECORD_IS_USED): Delete macro.
	(find_record_target, record_preopen): Declare functions.

2014-01-14  Yao Qi  <yao@codesourcery.com>

	* gdbarch.sh (core_xfer_shared_libraries): Change its argument
	'len''s type to ULONGEST.
	(core_xfer_shared_libraries_aix): Likewise.
	* gdbarch.c, gdbarch.h: Regenerated.
	* i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
	Change type of 'len' to ULONGEST.
	* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
	(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.

2014-01-14  Yao Qi  <yao@codesourcery.com>

	* common/linux-osdata.c (linux_xfer_osdata_processes): Change
	type of 'len' to ULONGEST.
	(linux_xfer_osdata_processgroups): Likewise.
	(linux_xfer_osdata_threads): Likewise.
	(linux_xfer_osdata_fds): Likewise.
	(linux_xfer_osdata_isockets): Likewise.
	(linux_xfer_osdata_shm): Likewise.
	(linux_xfer_osdata_sem): Likewise.
	(linux_xfer_osdata_msg): Likewise.
	(linux_common_xfer_osdata): Likewise.
	(struct osdata_type) <getter>: Likewise.
	* common/linux-osdata.h (linux_common_xfer_osdata): Update
	the declaration.

2014-01-14  Yao Qi  <yao@codesourcery.com>

	* target.h (target_xfer_partial_ftype): Update.
	(struct target_ops) <to_xfer_partial>: Change 'len' type to
	ULONGEST.
	* aix-thread.c (aix_thread_xfer_partial): Change type of
	argument 'len' to ULONGEST.
	* auxv.c (procfs_xfer_auxv): Likewise.
	(ld_so_xfer_auxv): Likewise.
	(memory_xfer_auxv): Likewise.
	* bfd-target.c (target_bfd_xfer_partial): Likewise.
	* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
	* bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
	* corelow.c (core_xfer_partial): Likewise.
	* ctf.c (ctf_xfer_partial): Likewise.
	* darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
	'%u'.
	(darwin_read_dyld_info): Likewise.
	(darwin_xfer_partial): Likewise.
	* exec.c (section_table_xfer_memory_partial): Likewise.
	(exec_xfer_partial): Likewise.
	* exec.h (section_table_xfer_memory_partial): Update
	declaration.
	* gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
	instead of plongest.
	(gnu_xfer_partial): Likewise.
	* ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
	(ia64_hpux_xfer_solib_got): Likewise.
	(ia64_hpux_xfer_partial): Likewise.
	* ia64-linux-nat.c (ia64_linux_xfer_partial):
	* inf-ptrace.c (inf_ptrace_xfer_partial):
	* inf-ttrace.c (inf_ttrace_xfer_partial):
	* linux-nat.c (linux_xfer_siginfo): Likewise.
	(linux_nat_xfer_partial): Likewise.
	(spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
	(linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
	* monitor.c (monitor_xfer_memory): Likewise.
	(monitor_xfer_partial): Likewise.
	* procfs.c (procfs_xfer_partial): Likewise.
	* record-full.c (record_full_xfer_partial): Likewise.
	(record_full_core_xfer_partial): Likewise.
	* remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
	instead of plongest.
	(gdbsim_xfer_partial): Likewise.
	* remote.c (remote_xfer_partial): Likewise.
	* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
	* rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
	declaration.
	* rs6000-nat.c (rs6000_xfer_partial): Likewise.
	(rs6000_xfer_shared_libraries): Likewise.
	* sol-thread.c (sol_thread_xfer_partial): Likewise.
	* sparc-nat.c (sparc_xfer_wcookie): Likewise.
	(sparc_xfer_partial): Likewise.
	* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
	(spu_xfer_partial): Likewise.
	* spu-multiarch.c (spu_xfer_partial): Likewise.
	* target.c (target_read_live_memory): Likewise.
	(memory_xfer_live_readonly_partial): Likewise.
	(memory_xfer_partial, memory_xfer_partial_1): Likewise.
	(target_xfer_partial, default_xfer_partial): Likewise.
	(current_xfer_partial): Likewise.
	* tracepoint.c (tfile_xfer_partial): Likewise.
	* windows-nat.c (windows_xfer_memory): Likewise.  Call
	pulongest instead of plongest.
	(windows_xfer_partial): Likewise.
	(windows_xfer_shared_libraries): Likewise.

2014-01-14  Yao Qi  <yao@codesourcery.com>

	* rs6000-nat.c (rs6000_xfer_shared_libraries): Use
	target_xfer_partial_ftype.

2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>

	PR python/15464
	PR python/16113
	* valops.c (value_struct_elt_bitpos): New function
	* py-type.c (convert_field): Set 'name' attribute of a gdb.Field
	object to 'None' if the field name is an empty string ("").
	* python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
	attribute to look for a field when 'name' is 'None'.
	(get_field_type): New function

2014-01-13  Doug Evans  <dje@google.com>

	PR symtab/16426
	* dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
	(try_open_dwop_file): Ditto.
	* gdb_bfd.c: #include "vec.h".
	(bfdp): New typedef.
	(struct gdb_bfd_data): New member included_bfds.
	(gdb_bfd_unref): Unref all included bfds.
	(gdb_bfd_record_inclusion): New function.
	* gdb_bfd.h (gdb_bfd_record_inclusion): Declare.

2014-01-13  Tom Tromey  <tromey@redhat.com>

	* gdbcore.h (deprecated_core_resize_section_table): Remove.

2014-01-13  Tom Tromey  <tromey@redhat.com>

	* defs.h (use_windows): Remove.
	* gdb.c (main): Update.
	* main.c (captured_main, gdb_main): Update.
	* main.h (struct captured_main_args) <use_windows>: Remove.
	* top.c (use_windows): Remove.

2014-01-13  Tom Tromey  <tromey@redhat.com>

	* defs.h (deprecated_flush_hook): Remove.

2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR threads/16216
	* linux-thread-db.c (try_thread_db_load): Add parameter
	check_auto_load_safe.  Move here the file_is_auto_load_safe call.
	(try_thread_db_load_from_pdir_1): Move it there from here.
	(try_thread_db_load_from_sdir): Update caller.
	(try_thread_db_load_from_dir): Move it there from here.

2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>

	* regformats/regdat.sh: Always rewrite the register file.

2014-01-13  Pedro Alves  <palves@redhat.com>

        * Makefile.in (CHECK_HEADERS): New variable.
        (check-headers:): New rule.

2014-01-13  Tom Tromey  <tromey@redhat.com>

	* cli/cli-setshow.c (do_set_command): Update.
	* defs.h (deprecated_set_hook): Remove.
	* top.c (deprecated_set_hook): Remove.

2014-01-13  Pedro Alves  <palves@redhat.com>

	* tracepoint.c (tfile_fetch_registers): Don't infer the PC from
	the tracepoint if the PC is a pseudo-register.

2014-01-13  Tom Tromey  <tromey@redhat.com>

	* defs.h (XCALLOC): Remove.
	* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
	(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
	* dwarf2loc.c (allocate_piece_closure): Likewise.
	* elfread.c (elf_symfile_segments): Likewise.
	(elf_symfile_segments): Likewise.
	* gdbtypes.c (copy_type_recursive): Likewise.
	* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
	* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
	* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
	XCALLOC.
	* mt-tdep.c (mt_gdbarch_init): Likewise.
	* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
	XCALLOC.
	* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
	* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
	* registry.c (registry_alloc_data): Likewise.
	* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
	* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
	* serial.c (serial_fdopen_ops): Likewise.
	* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
	XCALLOC.
	* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
	* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
	not XCALLOC.

2014-01-13  Tom Tromey  <tromey@redhat.com>

	* defs.h (XMALLOC): Remove.
	* avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
	* bfin-tdep.c (bfin_gdbarch_init): Likewise.
	* cli-out.c (struct ui_out *): Likewise.
	* cli/cli-dump.c (add_dump_command): Likewise.
	(add_dump_command): Likewise.
	* complaints.c (get_complaints): Likewise.
	(find_complaint): Likewise.
	* dwarf2-frame.c (execute_cfa_program): Likewise.
	* dwarf2read.c (abbrev_table_read_table): Likewise.
	* gdbarch.sh: Likewise.
	* gdbarch.c: Rebuild.
	* inf-ttrace.c (inf_ttrace_add_page): Likewise.
	* interps.c (interp_new): Likewise.
	* lm32-tdep.c (lm32_gdbarch_init): Likewise.
	* m32r-tdep.c (m32r_gdbarch_init): Likewise.
	* mi/mi-console.c (mi_console_file_new): Likewise.
	* mi/mi-interp.c (mi_interpreter_init): Likewise.
	* mi/mi-out.c (mi_out_new): Likewise.
	* mi/mi-parse.c (mi_parse): Likewise.
	* microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
	* moxie-tdep.c (moxie_gdbarch_init): Likewise.
	* observer.c (xalloc_observer_list_node): Likewise.
	* regcache.c (regcache_xmalloc_1): Likewise.
	* reggroups.c (reggroup_new): Likewise.
	(_initialize_reggroup): Likewise.
	* registry.c (register_data_with_cleanup): Likewise.
	* remote.c (remote_notif_stop_alloc_reply): Likewise.
	* ser-base.c (serial_ttystate): Likewise.
	* ser-mingw.c (make_pipe_state): Likewise.
	* ser-pipe.c (pipe_open): Likewise.
	* serial.c (serial_open): Likewise.
	* sh64-tdep.c (sh64_gdbarch_init): Likewise.
	* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
	(tui_alloc_win_info): Likewise.
	(tui_add_content_elements): Likewise.
	* tui/tui-file.c (tui_file_new): Likewise.
	* tui/tui-out.c (tui_out_new): Likewise.
	* ui-file.c (mem_file_new): Likewise.
	* ui-out.c (push_level): Likewise.
	(make_cleanup_ui_out_end): Likewise.
	(append_header_to_list): Likewise.
	(ui_out_new): Likewise.
	* user-regs.c (user_reg_add_builtin): Likewise.

2014-01-13  Tom Tromey  <tromey@redhat.com>

	* defs.h (XZALLOC): Remove.
	* ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
	* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
	(get_ada_tasks_inferior_data): Likewise.
	* auto-load.c (get_auto_load_pspace_data): Likewise.
	* auxv.c (get_auxv_inferior_data): Likewise.
	* bfd-target.c (target_bfd_reopen): Likewise.
	* breakpoint.c (get_catch_syscall_inferior_data): Likewise.
	(deprecated_insert_raw_breakpoint): Likewise.
	* bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
	* corelow.c (core_open): Likewise.
	* darwin-nat.c (darwin_check_new_threads): Likewise.
	(darwin_attach_pid): Likewise.
	* dummy-frame.c (dummy_frame_push): Likewise.
	* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
	* dwarf2loc.c (allocate_piece_closure): Likewise.
	* elfread.c (elf_symfile_segments): Likewise.
	* eval.c (ptrmath_type_p): Likewise.
	* exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
	* gdbtypes.c (alloc_type_arch): Likewise.
	(alloc_type_instance): Likewise.
	* hppa-tdep.c (hppa_gdbarch_init): Likewise.
	* inf-child.c (inf_child_can_use_agent): Likewise.
	* inflow.c (get_inflow_inferior_data): Likewise.
	* infrun.c (save_infcall_suspend_state): Likewise.
	* jit.c (jit_reader_load): Likewise.
	(get_jit_objfile_data): Likewise.
	(get_jit_program_space_data): Likewise.
	(jit_object_open_impl): Likewise.
	(jit_symtab_open_impl): Likewise.
	(jit_block_open_impl): Likewise.
	(jit_frame_sniffer): Likewise.
	* linux-fork.c (add_fork): Likewise.
	* maint.c (make_command_stats_cleanup): Likewise.
	* objfiles.c (get_objfile_pspace_data): Likewise.
	* opencl-lang.c (struct lval_closure): Likewise.
	* osdata.c (osdata_start_osdata): Likewise.
	* progspace.c (new_address_space): Likewise.
	(add_program_space): Likewise.
	* remote-sim.c (get_sim_inferior_data): Likewise.
	* sh-tdep.c (sh_gdbarch_init): Likewise.
	* skip.c (Ignore): Likewise.
	(skip_delete_command): Likewise.
	* solib-aix.c (get_solib_aix_inferior_data): Likewise.
	(library_list_start_library): Likewise.
	(solib_aix_current_sos): Likewise.
	* solib-darwin.c (get_darwin_info): Likewise.
	(darwin_current_sos): Likewise.
	* solib-dsbt.c (get_dsbt_info): Likewise.
	* solib-ia64-hpux.c (new_so_list): Likewise.
	(ia64_hpux_get_solib_linkage_addr): Likewise.
	* solib-spu.c (append_ocl_sos): Likewise.
	(spu_current_sos): Likewise.
	* solib-svr4.c (get_svr4_info): Likewise.
	(svr4_keep_data_in_core): Likewise.
	(library_list_start_library): Likewise.
	(svr4_default_sos): Likewise.
	(svr4_read_so_list): Likewise.
	* solib-target.c (library_list_start_library): Likewise.
	(solib_target_current_sos): Likewise.
	* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
	* symfile-debug.c (install_symfile_debug_logging): Likewise.
	* symfile.c (default_symfile_segments): Likewise.
	* target-descriptions.c (tdesc_data_init): Likewise.
	(tdesc_create_reg): Likewise.
	(struct tdesc_type *): Likewise.
	(tdesc_create_vector): Likewise.
	(tdesc_set_struct_size): Likewise.
	(struct tdesc_type *): Likewise.
	(tdesc_free_feature): Likewise.
	(tdesc_create_feature): Likewise.
	* windows-nat.c (windows_add_thread): Likewise.
	(windows_make_so): Likewise.
	* xml-support.c (gdb_xml_body_text): Likewise.
	(gdb_xml_create_parser_and_cleanup): Likewise.
	(xml_process_xincludes): Likewise.
	* xml-syscall.c (allocate_syscalls_info): Likewise.
	(syscall_create_syscall_desc): Likewise.

2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>

	* i386-tdep.c (i386_stap_parse_special_token_triplet): New
	function, with code from i386_stap_parse_special_token.
	(i386_stap_parse_special_token_three_arg_disp): Likewise.
	(i386_stap_parse_special_token): Move code to the two functions
	above; simplify it.

2014-01-09  Pedro Alves  <palves@redhat.com>
	    Hui Zhu  <hui@codesourcery.com>

	PR gdb/16101
	* breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
	bp_err_string.  Don't mark the location shlib_disabled if the
	error thrown wasn't a generic or memory error.  Catch errors
	thrown while inserting breakpoints in overlayed code.  Output
	error message of software breakpoints.
	* remote.c (remote_insert_breakpoint): If this breakpoint has
	target-side commands but this stub doesn't support Z0 packets,
	throw NOT_SUPPORTED_ERROR error.
	* exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
	* target.h (target_insert_breakpoint): Extend comment.
	(target_insert_hw_breakpoint): Add comment.

2014-01-08  Pedro Alves  <palves@redhat.com>

	* remote.c (remote_add_thread): Add threads silently if starting
	up.
	(remote_notice_new_inferior): If in all-stop, and starting up,
	don't call notice_new_inferior.
	(get_current_thread): New function, factored out from ...
	(add_current_inferior_and_thread): ... this.  Adjust.
	(remote_start_remote) <all-stop>: Fetch the thread list.  If we
	found any thread, then select the remote's current thread as GDB's
	current thread too.

2014-01-08  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Create a new section for the next release branch.
	Rename the section of the current branch, now that it has
	been cut.

2014-01-08  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
	* version.in: Bump version to 7.7.50.DATE-cvs.

2014-01-08  Yao Qi  <yao@codesourcery.com>

	* spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
	type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
	(spu_xfer_partial): Cast 'buf' to 'const char *'.

2014-01-08  Yao Qi  <yao@codesourcery.com>

	* spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
	return value of bfd_get_filename to symbol_file_add_from_bfd.

2014-01-08  Pierre Muller  <muller@sourceware.org>

	Fix PR16201.
	* coff-pe-read.c (struct read_pe_section_data): Add index field.
	(add_pe_exported_sym): Use SECTION_DATA->INDEX for call
	to prim_record_mininal_symbol_and_info.
	(add_pe_forwarded_sym): Use known section number of forwarded symbol
	in call to prim_record_minimal_symbol_and_info.
	(read_pe_exported_syms): Set index field of section_data.

2014-01-07  Andrew Pinski  <apinski@cavium.com>

	* features/aarch64-core.xml (cpsr): Change to be 64bit.
	* features/aarch64.c: Regenerate.

2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>

	* target.c (return_null): Define.
	(update_current_target): Use it instead of return_zero for
	functions that return a pointer.

2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

	* source.c (add_path): Fix check for duplicated paths in the previously
	included paths.

2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>

	* ada-lang.c: Remove duplicated include statements.
	* alphabsd-nat.c: Ditto.
	* amd64-darwin-tdep.c: Ditto.
	* amd64fbsd-nat.c: Ditto.
	* auto-load.c: Ditto.
	* ax-gdb.c: Ditto.
	* breakpoint.c: Ditto.
	* dbxread.c: Ditto.
	* fork-child.c: Ditto.
	* gdb_usleep.c: Ditto.
	* i386-darwin-tdep.c: Ditto.
	* i386fbsd-nat.c: Ditto.
	* infcmd.c: Ditto.
	* inferior.c: Ditto.
	* jv-lang.c: Ditto.
	* linux-nat.c: Ditto.
	* linux-tdep.c: Ditto.
	* m68kbsd-nat.c: Ditto.
	* m68klinux-nat.c: Ditto.
	* microblaze-tdep.c: Ditto.
	* mips-linux-tdep.c: Ditto.
	* mn10300-tdep.c: Ditto.
	* nto-tdep.c: Ditto.
	* opencl-lang.c: Ditto.
	* osdata.c: Ditto.
	* printcmd.c: Ditto.
	* regcache.c: Ditto.
	* remote-m32r-sdi.c: Ditto.
	* remote.c: Ditto.
	* symfile.c: Ditto.
	* symtab.c: Ditto.
	* tilegx-linux-nat.c: Ditto.
	* tilegx-tdep.c: Ditto.
	* tracepoint.c: Ditto.
	* valops.c: Ditto.
	* vaxbsd-nat.c: Ditto.
	* windows-nat.c: Ditto.
	* xtensa-tdep.c: Ditto.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* spu-linux-nat.c (_initialize_spu_nat): Declare.

2014-01-07  Yao Qi  <yao@codesourcery.com>
	    Joel Brobecker  <brobecker@adacore.com>

	* aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
	(pdc_write_regs): Likewise.
	(fetch_regs_kernel_thread): Likewise.
	(store_regs_kernel_thread): Likewise.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
	tagged type objects to their actual type.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (print_field_values): Add "language" parameter.
	Update calls to print_field_values and print_variant_part.
	Pass new parameter "language" in call to val_print instead
	of "current_language".  Replace call to ada_val_print by call
	to val_print.
	(print_variant_part): Add "language" parameter.
	(ada_val_print_struct_union): Update call to print_field_values.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ui_memcpy): Delete.
	(ada_print_floating): Update documentation.  Add empty line
	between between function documentation and implementation.
	Delete variable "buffer".  Use ui_file_xstrdup in place of
	ui_file_put.  Minor adjustments following this change.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_string): New function,
	extracted from ada_val_print_array.
	(ada_val_print_array): Replace extracted code by call
	to ada_val_print_string followed by a return.  Move
	"else" branch to the function's top block.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_array): Move implementation
	down.  Rename parameter "offset" and "val" into "offset_aligned"
	and "original_value" respectively.  Add parameter "offset".

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_ref): Rewrite by mostly
	re-organizing the code. Change the "???" message printed
	when target type is a TYPE_CODE_UNDEF into
	"<ref to undefined type>".

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (print_record): Delete, implementation inlined...
	(ada_val_print_struct_union): ... here.  Remove call to
	ada_check_typedef in inlined implementation.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_gnat_array): New function,
	extracted from ada_val_print_1;
	(ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
	(ada_val_print_flt, ada_val_print_struct_union)
	(ada_val_print_ref): Likewise.
	(ada_val_print_1): Delete variables i and elttype.
	Replace extracted-out code by call to corresponding
	new functions.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_1): Replace calls to
	ada_val_print_1 by calls to val_print.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_1): Add parameter "language".
	Update calls to self accordingly.  Replace calls to c_val_print
	by calls to val_print.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (print_record): Delete declaration.
	(adjust_type_signedness, ada_val_print_1): Likewise.
	(ada_val_print): Move function implementation down.
	(print_variant_part, print_field_values, print_record):
	Move function implementation up.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

	* python/py-type.c (typy_get_name): New function.
	(type_object_getset): Add entry for attribute "name".
	* NEWS: Add entry mentioning this new attribute.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
	statement.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* gnu-nat.c (info_port_rights): Add qualifier const to
	argument args.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* gnu-nat.c (trace_me): Use 'void' for empty argument list.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* gnu-nat.c (make_inf) Update declaration.
	(make_inf): Make it static.
	(inf_set_traced): Likewise.
	(inf_port_to_thread, inf_task_died_status): Likewise.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* gnu-nat.c (inf_tid_to_proc): Remove declaration.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* gnu-nat.c (_initialize_gnu_nat): Declare.

2014-01-07  Yao Qi  <yao@codesourcery.com>

	* gdbarch.sh (byte_order, byte_order_for_code): Change type to
	'enum bfd_endian'.
	(struct gdbarch_info) <byte_order>: Change type to
	'enum bfd_endian'.
	<byte_order_for_code>: Likewise.
	* gdbarch.c, gdbarch.h: Regenerated.

2014-01-06  Sasha Smundak  <asmundak@google.com>

	* jit.c: (jit_reader_load_command): Fix JIT reader path creation.

2014-01-06  Tom Tromey  <tromey@redhat.com>

	* doublest.c (convert_doublest_to_floatformat): Use const, not
	CONST.
	* somread.c (som_symtab_read): Likewise.

2014-01-07  Hui Zhu  <hui@codesourcery.com>

	* gdb_bfd.c (gdb_bfd_stash_filename): Removed.
	(gdb_bfd_open): Removed gdb_bfd_stash_filename.
	(gdb_bfd_fopen): Ditto.
	(gdb_bfd_openr): Ditto.
	(gdb_bfd_openw): Ditto.
	(gdb_bfd_openr_iovec): Ditto.
	(gdb_bfd_fdopenr): Ditto.
	* gdb_bfd.h (gdb_bfd_stash_filename): Removed.
	* solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
	with xstrdup.
	* solib-darwin.c (darwin_bfd_open): Alloc res->filename
	with xstrdup.
	* symfile-mem.c (symbol_file_add_from_memory): Removed
	gdb_bfd_stash_filename.

2014-01-03  Doug Evans  <dje@google.com>

	* nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
	output.

2014-01-01  Joel Brobecker  <brobecker@adacore.com>

	Update year range in copyright notice of all files.

2014-01-01  Joel Brobecker  <brobecker@adacore.com>

	* top.c (print_gdb_version): Set copyright year to 2014.

2014-01-01  Joel Brobecker  <brobecker@adacore.com>

	* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.

For older changes see ChangeLog-2013.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: