path: root/gas/ChangeLog

2007-05-24  Steve Ellcey  <sje@cup.hp.com>

	* Makefile.in: Regnerate.
	* configure: Regenerate.
	* aclocal.m4: Regenerate.
	* doc/Makefile.in: Regenerate.

2007-05-22  Bob Wilson  <bob.wilson@acm.org>
	
	* doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
	and index entries about automatic alignment of ENTRY instructions.
	
2007-05-22  Nick Clifton  <nickc@redhat.com>

	* doc/as.texinfo: Use @copying around the copyright notice.

2007-05-18  Joseph Myers  <joseph@codesourcery.com>

	* config/tc-mips.c (s_mipsset): Use generic s_set for directives
	containing a comma.

2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/4517
	2003-06-05  Michal Ludvig  <mludvig@suse.cz>
	* doc/as.texinfo: Document new directives: .cfi_restore, 
	.cfi_undefined, .cfi_same_value, .cfi_return_column, 
	.cfi_remember_state and .cfi_restore_state.

2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>

	* config/tc-m68k.c (md_apply_fix): Show value of out of range
	fixups in error message.
	(md_conver_frag_1): Propagate the fix source location and use
	as_bad_where rather than fatal, for better error messages.

2007-05-16  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.

2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>

	* app.c (do_scrub_chars): Don't damage \@ pseudo-variables.

2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>	

	PR gas/3041
	* config/tc-m68k.c (relaxable_symbol): Make sure that the correct
	addend is stored for relocs against weak symbols.
	(md_apply_fix): So not loose track of addend for relocs against
	weak symbols.

2007-05-14  Thiemo Seufer  <ths@mips.com>

	* config/tc-mips.c (md_parse_option): Fix parsing of -O option.

2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>

	* config/tc-score.c (data_op2, validate_immediate): Fix bug for
	addri, addri.c, subi, and subi.c when immediate number is hex.
	(score_insns): Remove subis and subis.c.
	(do_sub_rdi16): Delete.
	
2007-05-11  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
	spu_cons for word.
	(md_assemble): Tidy use of insn.flag.
	(get_imm): Likewise.  Handle uppercase input too.
	(spu_cons): New function.
	* config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
	(TC_FORCE_RELOCATION): Don't resolve them either.

2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
 
	* config/tc-arm.c (md_apply_fix): Generate more accurate
	diagnostic when 8-bit immediate range is exceeded for
	BFD_RELOC_ARM_OFFSET_IMM8.

2007-05-04  Alan Modra  <amodra@bigpond.net.au>

	PR gas/4460
	* config/tc-i386.c (lex_got): Don't replace the reloc token with
	a space if we already have a space.

2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (match_template): Don't explicitly check
	suffix for crc32 in Intel mode.
	(process_suffix): Issue an error for crc32 if the operand size
	is ambiguous.

2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
	    Nick Clifton  <nickc@redhat.com>

	PR gas/3041
	* config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
	(tc_gen_reloc): Adjust the addend of relocs against weak symbols.
	(md_apply_fix): Put zero values into the frags referencing weak
	symbols.

2007-05-02  Alan Modra  <amodra@bigpond.net.au>

	PR 4448
	* config/tc-ppc.c (ppc_insert_operand): Don't increase min for
	PPC_OPERAND_PLUS1.

2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (match_template): Check suffix for crc32 in
	Intel mdoe.
	(process_suffix): Default the suffix of 8bit crc32 to
	BYTE_MNEM_SUFFIX.
	(check_byte_reg): Skip check for 8bit crc32.

2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_assemble): Use register_prefix in
	error/warning message.
	(check_byte_reg): Likewise.
	(check_long_reg): Likewise.
	(check_qword_reg): Likewise.
	(check_word_reg): Likewise.
	(process_operands): Likewise.

2007-04-30  Alan Modra  <amodra@bigpond.net.au>

	PR 4436
	* config/tc-ppc.c (ppc_insert_operand): Disable range check if
	min > max.

2007-04-28  Thiemo Seufer  <ths@networkno.de>

	* config/tc-mips.c: Fix comment.

2007-04-26  Anatoly Sokolov <aesok@post.ru>

	* config/tc-avr.c (mcu_types): Add support for atmega8hva and
	atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
	* doc/c-avr.texi: Document new devices.

2007-04-24  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>

	* config/tc-m68k.c (mcf54455_ctrl): New.
	(HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
	(m68k_archs): Add isac.
	(m68k_cpus): Add 54455 family.
	(m68k_ip): Split Bg into Bb, Bs, Bg.
	(m68k_elf_final_processing): Add ISA_C.
	* doc/c-m68k.texi (M680x0 Options): Add isac.

2007-04-22  Alan Modra  <amodra@bigpond.net.au>

	* read.c (read_a_source_file): Skip multiple spaces to
	cover hack in mmix md_start_line_hook which overwrites a
	colon with a space.  Delete sermon and needless assertion.

2007-04-21  Alan Modra  <amodra@bigpond.net.au>

	* config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
	(md_atof): Make number_of_chars unsigned.  Revert last change.
	* config/tc-or32.c (md_apply_fix): Delete bogus assertions.
	* config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
	* config/tc-sh.h (md_optimize_expr): Likewise.
	* config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
	assertion.
	* config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.

2007-04-21  Nick Clifton  <nickc@redhat.com>

	* config/atof-vax.c (md_atof): Fix comparison inside know().

	* config/tc-ia64.c (emit_one_bundle): Fix typo.

2007-04-21  Alan Modra  <amodra@bigpond.net.au>

	* expr.c (expr): Assert on rankarg, not rank which can be unsigned.
	* read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
	Don't skip over NUL char.
	(pseudo_set): Set X_op for registers to O_register.
	* symbols.c (symbol_clone): Remove assertion that sym is defined.
	(resolve_symbol_value): Resolve O_register symbols.
	* config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
	Instead find st(0) by hash lookup.
	* config/tc-ppc.c (ppc_macro): Warning fix.

	* as.h (ENABLE_CHECKING): Default define to 0.
	(know): Assert if ENABLE_CHECKING.
	(struct relax_type): Remove superfluous declaration.
	* configure.in (--enable-checking): New.
	* configure: Regenerate.
	* config.in: Regenerate.
	* config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
	Check for duplicate powerpc_operands entries.

2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>

	* config/tc-m68k.c (mcf5253_ctrl): New.
	(mcf52223_ctrl): New.
	(m68k_cpus): Add 5253, 52221, 52223.

	* config/m68k-parse.h (RAMBAR_ALT): New.
	* config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
	(mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
	mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
	mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
	mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
	RAMBAR1.
	(mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
	(m68k_cpus): Adjust 5206, 5206e & 5307 entries.
	(m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
	to control register mapping.

2007-04-20  Alan Modra  <amodra@bigpond.net.au>

	* messages.c (as_internal_value_out_of_range): Fix typo in
	error message.  Return after printing domain error.
	* config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
	in max when shifting right.

2007-04-20  Alan Modra  <amodra@bigpond.net.au>

	* messages.c (as_internal_value_out_of_range): Extend to report
	errors for values with invalid low bits set.
	* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
	fields.  Check that operands and opcode fields are disjoint.
	(ppc_insert_operand): Check operands using mask rather than bit
	count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
	insertion code.
	(md_apply_fix): Adjust for struct powerpc_operand change.

2007-04-19  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
	Thumb-1.  Add sanity check for bogus relaxations.

2007-04-19  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.

2007-04-19  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2007-04-19  Nathan Froyd <froydnj@codesourcery.com>

	* doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.

2007-04-18  H.J. Lu <hongjiu.lu@intel.com>

	* doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.

2007-04-18  H.J. Lu <hongjiu.lu@intel.com>

	* config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
	(match_template): Handle operand size for crc32 in SSE4.2.
	(process_suffix): Handle operand type for crc32 in SSE4.2.
	(output_insn): Support SSE4.2.

2007-04-18  H.J. Lu <hongjiu.lu@intel.com>

	* config/tc-i386.c (cpu_arch): Add .sse4.1.
	(process_operands): Adjust implicit operand for blendvpd,
	blendvps and pblendvb in SSE4.1.
	(output_insn): Support SSE4.1.

2007-04-18  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.

2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

	* config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
	of as_warn_where for misaligned data.

2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

	* config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
	rs_fill frags.

2007-04-14  Steve Ellcey  <sje@cup.hp.com>

	* Makefile.am: Add ACLOCAL_AMFLAGS.
	* Makefile.in: Regenerate.

2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

	* config/tc-sh.c (align_test_frag_offset_fixed_p): New.
	(sh_optimize_expr): Likewise.
	* config/tc-sh.h (md_optimize_expr): Define.
	(sh_optimize_expr): Prototype.

2007-04-06  Matt Thomas  <matt@netbsd.org>

	* config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
	to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
	heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.

2007-04-04  Kazu Hirata  <kazu@codesourcery.com>

	* config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.

2007-04-04  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (do_neon_ext): Enforce immediate range.
	(insns): Use I15 for vext.

2007-04-04  Paul Brook  <paul@codesourcery.com>

	* configure.tgt: Loosen checks for arm uclinux eabi targets.

2007-04-02  Sterling Augustine  <sterling@tensilica.com>

	* config/tc-xtensa.c (xtensa_flush_pending_output): Check
	outputting_stabs_line_debug.

2007-03-26  Anatoly Sokolov <aesok@post.ru>

	* config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
	at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
	devices.
	* doc/c-avr.texi: Document new devices.

2007-04-02  Richard Sandiford  <richard@codesourcery.com>

	* doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
	* doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
	* config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.

2007-03-30  Sterling Augustine  <sterling@tensilica.com>
	    Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
	Do not check is_loop_target flag.
	(xtensa_frob_label): Adjust calls to xtensa_move_labels.
	(xg_assemble_vliw_tokens): Likewise.  Also avoid calling
	xtensa_move_labels for alignment of loop opcodes.
	
2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (process_suffix): Reindent a bit.

2007-03-30  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (encode_thumb2_ldmstm): New function.
	(do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
	(do_t_push_pop):  Use encode_thumb2_ldmstm.

2007-03-29  DJ Delorie  <dj@redhat.com>

	* config/tc-m32c.c (rl_for, relaxable): Protect argument.
	(md_relax_table): Add entries for ADJNZ macros.
	(M32C_Macros): Add ADJNZ macros.
	(subtype_mappings): Add entries for ADJNZ macros.
	(insn_to_subtype): Check for adjnz and sbjnz insns.
	(md_estimate_size_before_relax): Pass insn to insn_to_subtype.
	(md_convert_frag): Convert adjnz and sbjnz.

2007-03-29  Nick Clifton  <nickc@redhat.com>

	* itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
	initialization.
	* itbl-ops.h (enum e_processor): Initialise the e_nprocs field
	using ITBL_NUMBER_OF_PROCESSORS.
	* itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.

2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (build_modrm_byte): For instructions with 2
	register operands, encode destination in i.rm.regmem if its
	RegMem bit is set.

2007-03-28  Richard Sandiford  <richard@codesourcery.com>
	    Phil Edwards  <phil@codesourcery.com>

	* doc/as.texinfo: Put the contents after the title page rather
	than at the end of the document.

2007-03-27  Alan Modra  <amodra@bigpond.net.au>

	* NEWS: Mention ".reloc".

2007-03-26  Sterling Augustine  <sterling@tensilica.com>
	
	* config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
	in FLIX instructions.
	
2007-03-26  Julian Brown  <julian@codesourcery.com>

	* config/tc-arm.c (arm_it): Add immisfloat field.
	(parse_qfloat_immediate): Disallow integer syntax for floating-point
	immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
	(parse_neon_mov): Set immisfloat bit for operand if it parsed as a
	float.
	(neon_cmode_for_move_imm): Reject non-float immediates for float
	operands.
	(neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.

2007-03-26  Julian Brown  <julian@codesourcery.com>

	* doc/c-arm.texi: Add documentation for .dn/.qn directives.

2007-03-26  Alan Modra  <amodra@bigpond.net.au>

	* doc/as.texinfo (Reloc): Document.
	* read.c (potable): Add "reloc".
	(s_reloc): New function.
	* write.c (reloc_list): New global var.
	(resolve_reloc_expr_symbols): New function.
	(write_object_file): Call it.
	(write_relocs): Process reloc_list.
	* write.h (struct reloc_list): New.
	(reloc_list): Declare.

2007-03-24  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.

2007-03-24  Paul Brook  <paul@codesourcery.com>
	Mark Shinwell  <shinwell@codesourcery.com>

	* config/tc-arm.c (operand_parse_code): Add OP_oRRw.
	(parse_operands): Don't expect comma if first operand missing.
	Handle OP_oRRw.
	(do_srs): Encode register number, checking it is r13.  Update comment.
	(insns): Update SRS entries to take a register.

2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_begin): Allow '.' in mnemonic.

2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>

	* config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
	attempt to jump to the next instruction into NOPs.

2007-03-23  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-spu.c: Don't include opcode/spu.h.
	(md_assemble): Set tc_fix_data.insn_tag and arg_format.
	(md_apply_fix): Adjust.
	* config/tc-spu.h: Include opcode/spu.h.
	(struct tc_fix_info): New.
	(TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
	(TC_FORCE_RELOCATION): Define.

2007-03-22  Joseph Myers  <joseph@codesourcery.com>

	* doc/as.texinfo: Include VERSION_PACKAGE when reporting version.

2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (process_suffix): Check 0x90 instead of
	xchg for xchg %rax,%rax.

2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
	and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.

2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/4218
	* config/tc-i386.c (match_template): Properly handle 64bit mode
	"xchg %eax, %eax".

2007-03-21  Anton Ertl  <anton@mips.complang.tuw>

	PR gas/4124
	* config/tc-alpha.c (emit_ustX): Fix ustq code generation.

2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am: Run dep-am.
	* Makefile.in: Regenerated.

	* config/tc-i386.c: Don't include "opcodes/i386-opc.h".

	* config/tc-i386.h: Include "opcodes/i386-opc.h".
	(NOP_OPCODE): Removed.
	(template): Likewise.

2007-03-21  Andreas Schwab  <schwab@suse.de>

	* config/tc-i386.h (NOP_OPCODE): Restore.

2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>

	* config/tc-arm.c (do_mul): Don't warn about overlapping
	Rd and Rm operands when assembling for v6 or above.
	Correctly capitalize register names in the messages.
	(do_mlas): Likewise.  Delete spurious blank line.

2007-03-16  Kazu Hirata  <kazu@codesourcery.com>

	* config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_begin): Use i386_regtab_size to scan 
	i386_regtab.
	(parse_register): Use i386_regtab_size instead of ARRAY_SIZE
	on i386_regtab.

2007-03-15  Alexandre Oliva  <aoliva@redhat.com>

	PR gas/4184
	* app.c (do_scrub_chars): PUT after setting states.

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerated.

	* config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
	"opcode/i386.h".
	(md_begin): Check reg_name != NULL for the last entry in
	i386_regtab.

	* config/tc-i386.h: Move many entries to opcode/i386.h and
	opcodes/i386-opc.h.

	* configure.in (need_opcodes): Set true for i386.
	* configure: Regenerated.

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am (REPORT_BUGS_TO): Removed.
	(INCLUDES): Remove -DREPORT_BUGS_TO.
	* Makefile.in: Regenerated.

	* configure.in (--with-bugurl): Removed.
	* configure: Regenerated.

	* doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
	(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
	(TEXI2DVI): Likewise.
	(gasver.texi): Removed.
	(MOSTLYCLEANFILES): Remove gasver.texi.
	(as.1): Don't depend on gasver.texi.
	* doc/Makefile.in: Regenerated.

	* doc/as.texi: Include bfdver.texi instead of gasver.texi.

2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>

	* config/tc-arm.c (arm_copy_symbol_attributes): New.
	* config/tc-arm.h (arm_copy_symbol_attributes): Declare.
	(TC_COPY_SYMBOL_ATTRIBUTES): Define.
	* gas/symbols.c (copy_symbol_attributes): Use
	TC_COPY_SYMBOL_ATTRIBUTES.

2007-03-14  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.

2007-03-14  Alan Modra  <amodra@bigpond.net.au>

	PR 4029
	* write.c (relax_segment): Insert extra alignment padding
	to break infinite relax loop when given impossible
	gcc_except_table assembly.

2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
	on i.tm.base_opcode.
	(match_template): Likewise.
	(process_operands): Use ~0x3 mask to match MOV_AX_DISP32.

	* config/tc-i386.h (Opcode_D): New.
	(Opcode_FloatR): Likewise.
	(Opcode_FloatD): Likewise.
	(D): Redefined.
	(W): Likewise.
	(FloatMF): Likewise.
	(FloatR): Likewise.
	(FloatD): Likewise.

2007-03-09  Alexandre Oliva  <aoliva@redhat.com>

	* app.c (do_scrub_chars): Recognize comments after # line "file".
	* read.c (get_linefile_number): New.
	(s_app_line): Accept ill-formed .linefile lines as comments.

2007-03-09  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-i386.h (WORKING_DOT_WORD): Define.

2007-03-09  Alexandre Oliva  <aoliva@redhat.com>

	* app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
	* as.h (new_logical_line_flags): New.
	* input-scrub.c (new_logical_line): Turned into wrapper for...
	(new_logical_line_flags): this.  Handle flags.
	* read.c (potable): Add linefile.  Adjust appline argument.
	(s_app_file): Fake .appfiles no more.
	(s_app_line): For .linefile, accept file name and flags.

2007-03-08  Alan Modra  <amodra@bigpond.net.au>

	* symbols.c (symbol_relc_make_sym): Comment typo fixes.

2007-03-08  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2007-03-07  Joseph Myers  <joseph@codesourcery.com>

	* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
	bug-reporting URL.
	* doc/Makefile.am (gasver.texi): Define BUGURL.
	* doc/as.texinfo: Use BUGURL.
	* Makefile.in, configure, doc/Makefile.in: Regenerate.

2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>

	* config/tc-s390.c (md_parse_option): z9-ec option added.

2007-03-02  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (relax_immediate): Always return positive values.
	(relaxed_symbol_addr): New function.
	(relax_adr, relax_branch): Use it.
	(arm_relax_frag): Pass strect argument.  Adjust infinite loop check.

2007-03-01  Joseph Myers  <joseph@codesourcery.com>

	* as.c (parse_args): Update copyright date.

2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>

	* configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.

2007-02-28  Nick Clifton  <nickc@redhat.com>

	PR gas/3797
	* config/tc-d10v.c (do_assemble): Do not generate error messages,
	just return -1 whenever a problem is encountered.
	(md_assemble): If do_assemble returns -1 generate a non-fatal
	error message and return.

	PR gas/2623
	* config/tc-msp430.c (line_separator_char): Change to '{'.

2007-02-27  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-m68hc11.c (fixup24): Correct fixup size.
	(build_jump_insn): Likewise.
	(build_insn): Likewise.
	(s_m68hc11_relax): Likewise.

2007-02-27  Alan Modra  <amodra@bigpond.net.au>

	* config/obj-elf.c (elf_frob_file): frag_wane any new frags.

2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>

	* config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.

2007-02-23  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-mn10300.c (md_convert_frag): Correct fixup size.
	(md_assemble): Likewise.

2007-02-22  Alan Modra  <amodra@bigpond.net.au>

	* write.c (size_seg): Always clear SEC_RELOC here.
	(install_reloc): New function, extracted from..
	(write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
	with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
	testing frag size.  Set SEC_RELOC here.

2007-02-21  Alan Modra  <amodra@bigpond.net.au>

	PR 4082
	* config/tc-avr.h (TC_FX_SIZE_SLACK): Define.

2007-02-20  Thiemo Seufer  <ths@mips.com>

	* doc/c-mips.texi: Document 74kc, 74kf, 74kx.

2007-02-20  Thiemo Seufer  <ths@mips.com>

	* config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.

2007-02-20  Thiemo Seufer  <ths@mips.com>
            Chao-Ying Fu  <fu@mips.com>

	* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
	ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
	(macro_build): Add case '2'.
	(macro): Expand M_BALIGN to nop, packrl.ph or balign.
	(validate_mips_insn): Add support for balign instruction.
	(mips_ip): Handle DSP R2 instructions. Support balign instruction.
	(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
	md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
	command line options.
	(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
	(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
	* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
	.set dspr2, .set nodspr2.

2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>

	* config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
	(m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.

2007-02-18  Alan Modra  <amodra@bigpond.net.au>

	* write.c (TC_FX_SIZE_SLACK): Define.
	(write_relocs): Reinstate check for fixup within frag.
	* config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
	* config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
	* config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
	* config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
	* config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.

2007-02-17  Mark Mitchell  <mark@codesourcery.com>
            Nathan Sidwell  <nathan@codesourcery.com>
            Vladimir Prus  <vladimir@codesourcery.com
            Joseph Myers  <joseph@codesourcery.com>

	* configure.in (--with-bugurl): New option.
	* configure: Regenerate.
	* dep-in.sed: Remove bin-bugs.h.
	* Makefile.am (REPORT_BUGS_TO): Define.
	(INCLUDES): Define REPORT_BUGS_TO.
	(DEP_INCLUDES): Likewise.
	($(OBJS)): No longer depend on bin-bugs.h.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* as.c (show_usage): Don't print empty REPORT_BUGS_TO.
	* as.h: Remove include of bin-bugs.h.

2007-02-17  Alan Modra  <amodra@bigpond.net.au>

	* write.c: White space fixes.
	(fixup_segment): Move symbol_mri_common_p adjustments..
	(write_relocs): ..and symbol_equated_reloc_p adjustments..
	(adjust_reloc_syms): ..to here.

2007-02-16  Alan Modra  <amodra@bigpond.net.au>

	* subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
	xmalloc, memset.  Don't bother assigning NULL to known zero mem.
	(subseg_set_rest): Remove unnecessary cast.
	* write.c: Include libbfd.h.  Replace PTR with void * throughout.
	Remove unnecessary forward declarations and casts.
	(set_symtab): Delete extern bfd_alloc.
	(fixup_segment): Move.

2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>

	* config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
	* config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
	(mcf5475_ctrl, mcf5485_ctrl): New.
	(m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
	(m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
	(init_table): Add asid, mmubar, adjust rombar0.

2007-02-14  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
	* config/tc-i386.c: Wrap overly long lines, whitespace fixes.
	(process_operands): Move old Seg2ShortForm and Seg3ShortForm
	code, and test for these insns using a combination of
	opcode_modifier and operand_types.

2007-02-07  Paul Brook  <paul@codesourcery.com>

	* configure.tgt: Add arm*-*-uclinux-*eabi.

2007-02-05  Dave Brolley  <brolley@redhat.com>
	    Richard Sandiford  <rsandifo@redhat.com>
	    DJ Delorie  <dj@redhat.com>
	    Stan Cox  <scox@redhat.com>
	    Jim Blandy  <jimb@redhat.com>
	    Nick Clifton  <nickc@redhat.com>
	    Jim Wilson  <wilson@redhat.com>
	    Frank Ch. Eigler  <fche@redhat.com>
	    Graydon Hoare  <graydon@redhat.com>
	    Ben Elliston  <bje@redhat.com>
	    John Healy  <jhealy@redhat.com>
	    Richard Henderson  <rth@redhat.com>

	* Makefile.am (CPU_TYPES): Add mep.
	(TARGET_CPU_CFILES): Add tc-mep.c.
	(TARGET_CPU_HFILES): Add tc-mep.h.
	(DEPTC_mep_elf): New variable.
	(DEPTC_mep_coff): Likewise.
	(DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
	* configure.in: Support mep.
	* configure.tgt: Likewise.
	* config/tc-mep.c: New file.
	* config/obj-elf.c: New file.
	* config/tc-mep.c: New file.
	* config/tc-mep.h: New file.
	* testsuite/gas/mep: New testsuite with content.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

2007-02-05  Dave Brolley  <brolley@redhat.com>

	* cgen.c (gas_cgen_install_complex_reloc): Removed.
	(complex_reloc_installation_howto): Removed.

2007-02-05  Dave Brolley  <brolley@redhat.com>
	    Graydon Hoare  <graydon@redhat.com>
	    DJ Delorie  <dj@redhat.com>
	    Catherine Moore  <clm@redhat.com>
	    Michael Chastain  <chastain@redhat.com>
	    Frank Ch. Eigler  <fche@redhat.com>

	* symbols.c (use_complex_relocs_for): New, to decide
	when to use complex relocs. Add signed RELC support.
	(resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
	encode expression symbols as mangled complex relocation symbols (when
	compiled with -DOBJ_COMPLEX_RELOC).
	(symbol_relc_make_sym,value,expr): New traversal/conversion routines.
	* cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
	encode_addend with new args. Modify to get start, length from
	ifield whenever it is set. Also change condition on which
	self-describing relocs are encoded. Add hook into
	gas_cgen_encode_addend.
	(queue_fixup_recursively): Add signed RELC support. Change from masked
	expr to trunc flag. Restore assignment of sub-field value to
	temporary in fixups array. Reflect changed meaning of last arg to
	queue_fixup_recursively.
	(fixup): Add cgen_maybe_multi_ifield member.
	(make_right_shifted_expr): New function.
	(queue_fixup): Change to recursive function that fragments
	fixups if operand has a multi-ifield.
	(gas_cgen_parse_operand): Add RELC code to wrap expressions in
	symbols, call weak_operand_overflow_check, and fragment call
	queue_fixup with operand fields.
	(gas_cgen_finish_insn) Modify to manage ifield pointer.
	(weak_operand_overflow_check): New function to try to select
	insns correctly.
	(gas_cgen_encode_addend): New function for relc.
	(gas_cgen_install_complex_reloc): Likewise.
	(gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
	* write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
	cgen_maybe_multi_ifield field to fx_cgen substructure.
	* cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
	* symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
	
2007-02-03  DJ Delorie  <dj@delorie.com>

	* config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
	byte relocs.
	* config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
	(m32c_cons_fix_new): Prototype.

2007-02-02  Bob Wilson  <bob.wilson@acm.org>
	
	* config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
	(xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
	
2007-02-02  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
	(xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
	(map_suffix_reloc_to_operator): New.
	(map_operator_to_reloc): New.
	(expression_maybe_register): Fix incorrect test of return value from
	xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
	(xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.

2007-02-02  Bob Wilson  <bob.wilson@acm.org>

	* config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
	(tinsn_get_tok): Delete prototype.
	* config/tc-xtensa.c (tinsn_get_tok): Delete.
	
2007-02-02  Bob Wilson  <bob.wilson@acm.org>

	* config/xtensa-relax.h (struct build_instr): Delete id field.
	* config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
	and LABEL tokens.
	(append_literal_op, append_label_op): Remove litnum/labnum arguments;
	set op_data fields to zero.
	(parse_id_constant): Delete.
	(build_transition): Remove code to handle numbered literals and labels.

2007-02-02  Bob Wilson  <bob.wilson@acm.org>

	* config/xtensa-relax.c (build_transition): Remove code after as_fatal.
	(build_transition_table): Likewise.

2007-02-01  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
	fx_tcbit.
	* config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.

2007-02-02  Alan Modra  <amodra@bigpond.net.au>

	* write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
	(struct fix <fx_plt>): Rename to tcbit2.
	* write.c (fix_new_internal): Adjust.
	(TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
	* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
	* config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
	* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
	* config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
	* config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
	* config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
	* config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
	* config/tc-msp430.c (msp430_force_relocation_local): Likewise.
	* config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
	* config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
	Instead, compare fx_r_type.
	* config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
	fx_tcbit in place of fx_plt.
	* config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
	* doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
	to fx_plt.

2007-01-30  Nick Clifton  <nickc@redhat.com>

	* as.c (main): Mark symbols created via the --defsym command line
	option as volatile so that they can be overridden later on by a
	.set directive.  This maintains compatibility with the behaviour
	of earlier versions of the assembler.
	* doc/as.texinfo (--defsym): Document that the defined symbol's
	value can be overridden via a .set directive.

2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (swap_imm_operands): Renamed to ...
	(swap_2_operands): This.  Take 2 ints.
	(md_assemble): Updated.
	(swap_operands): Call swap_2_operands to swap 2 operands.

2007-01-24  DJ Delorie  <dj@redhat.com>

	* config/tc-m32c.c (md_pseudo_table): Add .3byte.

2007-01-22  Nick Clifton  <nickc@redhat.com>

	PR gas/3871
	* tc-score.c: Remove unnecessary uses of _().
	Make the err_msg[] a file level local array in order to save
	storage space.
	Remove unnecessary sprintf()s.

2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>

	PR gas/3871
	* config/tc-score.c : Using _() for const string.
	Do not assign inst.error with a local string pointer.
	(md_section_align): Pad section.
	
2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (build_modrm_byte): Check number of operands
	when procssing memory/register operand.

2007-01-12  Nick Clifton  <nickc@redhat.com>

	PR gas/3856
	* macro.c (expand_irp): Do not ignore spaces inside quoted
	strings.

2007-01-12  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
	* config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
	* config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
	(TC_FORCE_RELOCATION): Define.
	(TC_FORCE_RELOCATION_LOCAL): Define.
	* config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.

2007-01-12  Alan Modra  <amodra@bigpond.net.au>

	* input-file.c (input_file_open): Check fgets return.

2007-01-11  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (do_t_add_sub): Use Rd and Rs.

2007-01-11  Nick Clifton  <nickc@redhat.com>

	PR gas/3707
	* config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
	variable.

	* config/tc-mcore.c (md_number_to_chars): Use
	number_to_chars_{big|little}endian.

2007-01-08  Kazu Hirata  <kazu@codesourcery.com>

	* config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
	architecture by itself.
	(m68k_ip): Don't issue a warning for tbl instructions on fido.
	(m68k_elf_final_processing): Treat Fido as an architecture by
	itself.

2007-01-08  Kai Tietz	<kai.tietz@onevision.com>

	* configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*

2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
	depending on allow_naked_reg.

2007-01-04  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.

2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/3830
	* config/tc-i386.c (register_prefix): New.
	(set_intel_syntax): Set set_intel_syntax to "" if register
	prefix isn't needed.
	(check_byte_reg): Use register_prefix for error message.
	(check_long_reg): Likewise.
	(check_qword_reg): Likewise.
	(check_word_reg): Likewise.

2006-01-04  Julian Brown  <julian@codesourcery.com>

	* config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
	(do_neon_qshl_imm): Likewise.
	(do_neon_rshl): New function. Handle rounding variants of
	v{q}shl-by-register.
	(insns): Use do_neon_rshl for vrshl, vqrshl.

2007-01-04  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
	and vacle.

2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (swap_operands): Remove branches.

2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c: Update copyright year.
	* config/tc-i386.h: Likewise.

2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (smallest_imm_type): Return unsigned int
	instead of int.

2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c: Convert to ISO C90 formatting
	* config/tc-i386.h: Likewise.

2007-01-03  David Daney  <ddaney@avtrex.com>

	* config/tc-mips.c (md_show_usage):  Clean up -mno-shared
	documentation.

For older changes see ChangeLog-2006

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: