path: root/gas/ChangeLog

Thu Mar 25 08:59:14 1993  Ian Lance Taylor  (ian@cygnus.com)

	* config/obj-coffbfd.c (do_relocs_for): Remove a29k special case.
	(fixup_segment): Add a29k special case; the linker is not prepared
	to see a segment offset here.

	* app.c (do_scrub_next_char): Added new state, 10, modifying state
	9 to only keep a space in between identifier characters.

Wed Mar 24 02:16:22 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

	* Makefile.in: add dvi target; as-$(config).texinfo might live in
	srcdir, might be in objdir.

	* doc/Makefile.in: dvi depends on as.dvi

Mon Mar 22 23:59:13 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* Makefile.in: add installcheck target

Mon Mar 22 10:19:00 1993  Ian Lance Taylor  (ian@cygnus.com)

	* config/tc-mips.c (macro): Use $AT for any floating point load.

Sat Mar 20 12:50:51 1993  Ken Raeburn  (raeburn@urth.cygnus.com)

	* config/tc-m68k.c (m68k_ip): For operand type 'M', reject
	bignums, but don't emit error message.

Fri Mar 19 21:02:19 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* Makefile.in (targ-cpu.o): Depend on config.h.

Wed Mar 17 16:44:06 1993  Ian Lance Taylor  (ian@cygnus.com)

	* app.c (do_scrub_next_char): Added new state, 9, to avoid
	dropping a space immediately following an identifier.
	* expr.c, write.c: Rewrote assert expressions to not use multiple
	lines; I don't think that can be done portably.
	* config/tc-mips.c (macro): Use $AT if target register is zero in
	load instruction, which it can be for a floating point load.

Mon Mar 15 12:17:28 1993  Ian Lance Taylor  (ian@cygnus.com)

	* write.c (write_contents): Compute the relocs before writing out
	the section contents.
	* config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
	symbol table and values right.
	* config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
	with $L is local.
	* config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
	by the section vma.

	* config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
	z8k-opc.h, not z8k.h.

	* config/obj-coffbfd.c (obj_coff_endef): Correct test for .bf
	symbol.

Fri Mar 12 18:33:36 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: recognize sparc-sun-solaris2* instead of -solaris2

Fri Mar 12 12:00:07 1993  Ian Lance Taylor  (ian@cygnus.com)

	* expr.c, write.c: Ultrix native 4.2 cc requires assert condition
	to be on a single line.

Thu Mar 11 17:56:22 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* Makefile.in (config.h): Create file, writing out definitions of
	target cpu, alias, and canonical name.
	(ALL_CFLAGS): No longer define TARGET_CPU.

	* Makefile.in (check): Print a message, instead of quitting
	silently.

	* as.c (main): Don't catch any signals, for now.

	* version.c: Deleted.
	* Makefile.in: Generate it, putting in only the version number
	itself.
	(VERSION): New variable.
	* as.c: Include config.h.
	(main): Reformatted version string.  Include target alias.  Don't
	print if not requested (i.e., unknown -v argument).

	* as.c (stralloc): Deleted.
	(main): Call strdup instead.

	* configure.in: Handle all 68300 series chips.
	* config/tc-m68k.c: Include config.h.
	(md_assemble): Assume TARGET_CPU is defined.  Accept some 68300
	series cpus as defaults.
	(md_parse_option): Accept some m68300 series CPUs as defaults.

Wed Mar 10 17:41:16 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* as.c (EXIT_SUCCESS, EXIT_FAILURE): Define to normal values if
	not already defined.
	(main, got_sig): Use them.
	* config/ho-vms.h (EXIT_SUCCESS, EXIT_FAILURE): Reverse default
	values.

Tue Mar  9 07:40:06 1993  Ian Lance Taylor  (ian@cygnus.com)

	* config/obj-ecoff.c, config/obj-ecoff.h: Preliminary ECOFF
	support.

	* config/tc-mips.h (TARGET_FORMAT): Define based on OBJ_AOUT vs.
	OBJ_ECOFF as well as TARGET_BYTES_*_ENDIAN.
	(struct loc, struct proc, struct file): Moved to tc-mips.c within
	#ifndef OBJ_ECOFF block, since ECOFF uses different versions.
	* config/tc-mips.c: Rearranged for ECOFF support.  Added
	prototypes for all static functions.  Moved existing minimal
	debugging format support info #ifndef OBJ_ECOFF blocks.
	(macro_build_lui): Eliminated sign_extend argument, because ECOFF
	does not support a non sign extended high 16 bits reloc.  Adjusted
	all callers accordingly.
	(tc_get_register): Renamed from get_register, and made non-static.

	* config/mips-big.mt, config/mips-lit.mt: New files.  Define
	TARGET_BYTES_BIG_ENDIAN and TARGET_BYTES_LITTLE_ENDIAN,
	respectively.
	* configure.in (mips-*-bsd*): Use gas_target mips-lit.
	(mips-*-ultrix*, mips-*-irix*, mips-*-ecoff): New targets, using
	obj_format ecoff and gas_target mips-lit or mips-big.

Tue Mar  9 07:43:01 1993  Ken Raeburn  (raeburn@cygnus.com)

	* version.c: Bump to version 2.0.1.

Tue Mar  9 07:40:06 1993  Ian Lance Taylor  (ian@cygnus.com)

	* write.c (chain_frchains_together): Check that seg_info (section)
	is not NULL.
	(write_object_file): Call obj_frob_file after setting the symbols,
	not before.

Mon Mar  8 14:57:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* config/tc-i386.h (TC_COUNT_RELOC): Look for fx_addsy only.

Fri Mar  5 09:05:55 1993  Ian Lance Taylor  (ian@cygnus.com)

	* read.h: Define stringer here.
	read.c, config/obj-ieee.c, config/obj-tcm88k.c: Not any of these
	places.

Thu Mar  4 11:52:23 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* read.c (s_space): Multiply repeat count by mult, not fill.

Thu Mar  4 05:20:42 1993  Ken Raeburn  (raeburn@cygnus.com)

	* read.c: Include ctype.h.

Wed Mar  3 10:41:46 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	Patches from Eric Youngdale:
	* make-gas.com: Find obstack.obj if it's not in the current
	directory.
	* read.c (s_ignore): Don't declare is_end_of_line.  It's
	redundant, and triggers a VMS gcc compiler bug.

	* write.c (write_object_file): Macro SUB_SEGMENT_ALIGN now takes
	current segment as an argument.  (Ignored in all cases but VMS.)
	All callers and definitions changed.

Tue Mar  2 11:56:19 1993  Ian Lance Taylor  (ian@cygnus.com)

	* listing.c: Cleaned up a bit, added prototypes, made NO_LISTING
	case compile again.

Tue Mar  2 08:53:34 1993  Ken Raeburn  (raeburn@cygnus.com)

	* config/tc-m68k.c (isbyte): Accept all values from -255 to +255,
	so "~0x80" won't be rejected.

	* config/obj-elf.c: No longer include elf/reloc.h.
	(obj_elf_section): Set SEC_READONLY and SEC_CODE for text section.
	(obj_elf_stab, obj_elf_desc): Deleted do-nothing and commented-out
	routines.
	(obj_elf_xstab): New routine.
	(obj_elf_set_size): Call as_warn, not fprintf.  Pass desired
	argument to s_ignore.  Put "#if 0" around unused code.
	(obj_pseudo_table): Use s_ignore instead of do-nothing routines.
	Call elf_xstabs for .stabs and .xstabs operators.

	* config/tc-sparc.h (TARGET_FORMAT) [OBJ_ELF]: Now "elf32-sparc".

	* write.c (relax_and_size_seg): Set SEC_RELOC only if fixups are
	present.

	* configure.in: mips-bsd configuration was missing format spec.
	Should use aout.

	* Makefile.in (Makefile): Depends on configure.in.

	* config/tc-mips.c (append_insn): Don't check for alignment of
	frag in memory; alignment of instructions in section is a separate
	matter.

	* config/tc-mips.c (macro_build_lui): Fix some assumptions of ANSI
	C availability.

	* listing.h: Always provide function declarations, not macros, so
	pcc won't lose.

Tue Mar  2 00:50:43 1993  John Gilmore  (gnu@cygnus.com)

	* CONTRIBUTORS:  Update Gilmore entry.

Wed Feb 24 14:58:19 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* frags.c (frag_init): New function.
	(zero_address_frag, bss_address_frag): Now initialized at run
	time.
	* as.c (main): Call frag_init.

Wed Feb 24 10:32:42 1993  Ian Lance Taylor  (ian@cygnus.com)

	* app.c (do_scrub_next_char): In LEX_IS_LINE_COMMENT_START case:
	Don't unget ch2 if we didn't get it.

Wed Feb 24 04:14:07 1993  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

	* doc/Makefile.in (TEXIDIR): Updated for new layout.

	* config/tc-sparc.c (s_common): Add support for ELF version.
	(tc_gen_reloc) [BFD_ASSEMBLER]: New function.
	* config/tc-sparc.h (TARGET_ARCH, TARGET_FORMAT) [BFD_ASSEMBLER]:
	New macros.
	(md_convert_frag): New macro.

	* config/tc-m68k.c (m68k_ip): For PC-relative addressing of a
	symbol, fix the offset so "+2" isn't required.

	* config/tc-i960.c (line_comment_chars, line_separator_chars):
	Define as common/bss.
	(op_hash, reg_hash, areg_hash, iclasses_seen, br_cnt): Default C
	initializers are sufficient.

	* config/obj-aout.h [BFD_ASSEMBLER]: Include libaout.h from bfd.
	(TARGET_FORMAT) [BFD_ASSEMBLER]: Default to "a.out".
	(S_SET_*, S_GET_*, obj_frob_symbol) [BFD_ASSEMBLER]: New macros.
	(S_SET_TYPE) [!BFD_ASSEMBLER]: New macro.
	* config/obj-aout.c: Use PARAMS macro for declarations.  Remove
	"IGNORE_DEBUG" conditional, since both branches are identical.
	Use S_SET_TYPE, S_GET_TYPE, and S_GET_DESC instead of directly
	referencing symbol structure members.
	(obj_aout_frob_symbol) [BFD_ASSEMBLER]: New function.

	* as.h (struct frag): Reordered a couple of fields for better
	packing.

	* write.c (record_alignment) [BFD_ASSEMBLER]: Record it in the
	section info.
	(write_contents) [BFD_ASSEMBLER]: New function.
	(write_object_file) [BFD_ASSEMBLER]: Always handle -R here.  Call
	fix_new with BFD_RELOC_NONE instead of 0 or NO_RELOC.  Call
	obj_frob_file, obj_frob_symbol, tc_frob_symbol if defined.
	(fixup_segment): Make sure common-section symbols get treated the
	same as undefined symbols.
	(fix_new) [BFD_ASSEMBLER]: Argument r_type is of type
	bfd_reloc_code_real_type.  Use seg_fix_{root,tail}P derived from
	section info.
	* write.h (fix_new): Update prototype.

	* tc.h (md_operand, md_convert_frag, tc_headers_hook,
	md_section_align, md_undefined_symbol): Don't provide prototypes
	if these are defined as macros.
	(md_convert_frag) [BFD_ASSEMBLER]: BFD version needs bfd and
	section passed.

	* symbols.c (symbol_new): Argument NAME is now pointer to const.
	Simplified STRIP_UNDERSCORE code.  Remove assumptions about null
	pointers in freshly allocated storage. 	[BFD_ASSEMBLER]: Get new
	BFD symbol.
	(colon): Display other/desc fields of redefined symbol only if
	S_GET_OTHER and S_GET_DESC are defined.
	(symbol_make): Argument NAME is now pointer to const.
	(symbol_find, symbol_find_base): Likewise.
	(S_IS_*, S_GET_*, S_SET_*) [BFD_ASSEMBLER]: New functions.
	* symbols.h: Fix prototypes for new const arguments.  Add
	prototypes for BFD_ASSEMBLER S_* functions.

	* subsegs.c (subseg_change) [BFD_ASSEMBLER]: BFD version of code
	for changing to an existing section.
	(subseg_new_rest) [BFD_ASSEMBLER]: Split off from subseg_new,
	called by subseg_new and subseg_set.
	(subseg_new) [BFD_ASSEMBLER]: Rewritten to change to new section,
	given section name and subseg number.
	(subseg_set) [BFD_ASSEMBLER]: New function; change to a possibly
	new section/subsection.

	* read.c: Don't include ctype.h.
	(cons) [BFD_ASSEMBLER]: For undefined symbols, use BFD_RELOC_32
	for now; should be machine-dependent.

	* configure.in: Accept *-*-elf and *-*-solaris* as ELF format
	targets, forcing BFD use.

Wed Feb 17 18:59:03 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* config/tc-sparc.c: Use PARAMS macro for static function
	declarations.  Use BFD_RELOC_ macros everywhere, with
	compatibility macros declared for non-BFD mode.
	(struct sparc_it) [BFD_ASSEMBLER]: Use bfd_reloc_code_real_type
	instead of enum reloc_type.
	(emit_sparc_reloc): Commented-out function deleted.
	(md_convert_frag): Deleted.
	(tc_aout_pre_write_hook): Don't define for BFD_ASSEMBLER.
	(md_apply_fix): Changed calling sequence (conditionally) for BFD
	version.
	* config/tc-sparc.h (md_convert_frag): New macro.

	* config/obj-aout.c (obj_aout_stab): Refer to undefined_section,
	not SEG_UNKNOWN.  Use S_SET_TYPE, S_GET_TYPE, S_GET_DESC instead
	of referencing fields directly.

	* write.c (cvt_frag_to_fill): New function; extracted from
	write_object_file.
	(write_object_file) [! BFD_ASSEMBLER]: Call it.
	(relax_and_size_seg) [BFD_ASSEMBLER]: New function; relax section
	and set its size and flags.

	* struc-symbol.h (struct symbol) [BFD_ASSEMBLER]: Replace some
	fields with BFD equivalents.  Turn on back-pointers, and add
	target-specific fields at end.

Thu Feb 11 09:20:37 1993  Ian Lance Taylor  (ian@cygnus.com)

	* config/obj-coffbfd.c (fill_section): Don't set vaddr here.
	(write_object_file): Set it here instead, so that fixup_segment
	can see the correct value.

Mon Feb  8 13:56:17 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* write.c (write_object_file): Check for errors and warnings and
	bail out before processing contents.
	(chain_frchains_together_1): New function, does most of the work
	of remove_subsegs.
	(chain_frchains_together) [BFD_ASSEMBLER]: New function.
	(remove_subsegs) [! BFD]: Call it.
	(write_object_file) [BFD_ASSEMBLER]: Converted to use BFD
	structures and routines.

	* config/obj-elf.*: New files.

	* config/mips.mt, config/rs6000.mt: Deleted.

	* config/h8300.mt: Don't specify compiler here.

	* config/z8k.mt: The z8k code depends on the z8k opcode table,
	not the h8300 one.
	* config/tc-z8k.h: Comment fix.

	* write.c: Reordered some functions for better inlining.
	(fixup_segment): Linkrelax code is no longer conditional on
	TC_I960.

Thu Feb  4 12:45:16 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* config/{h8500.mt, tc-h8500.c, tc-h8500.h, obj-coffbfd.c,
	obj-coffbfd.h}: support for the H8/500

Wed Feb  3 19:28:18 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* config/obj-vms.h (SUB_SEGMENT_ALIGN): Define VMS version here.
	* write.c (write_object_file): Not here.
	(fix_new): Initialize fx_addnumber.

	* listing.c: Don't include target-cpu.h explicitly, since as.h
	includes it.

Thu Jan 28 00:35:40 1993  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

	* write.h [BFD_ASSEMBLER]: Don't declare next_object_file_charP,
	*_fix_root, *_fix_tail, seg_fix_rootP, seg_fix_tailP.
	(struct fix): Reordered fields for compactness and efficiency.
	Converted some logical fields to 1-bit fields.

	* config/obj-aout.h: Use PARAMS.
	[BFD_ASSEMBLER]: Don't define/declare AOUT_MACHTYPE, seg_N_TYPE,
	N_TYPE_seg, DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE.

	* read.c: Don't include listing.h; as.h includes it.  Removed
	DONTDEF code.
	[BFD_ASSEMBLER]: Include subsegs.h.
	(old_buffer, new_broken_words): Default initialization is
	sufficient.

	* output-file.c [BFD_ASSEMBLER]: Include bfd.h, default TARGET_MACH
	to 0, define stdoutput.
	(output_file_create) [BFD_ASSEMBLER]: Call bfd_perror on failure.
	Call bfd_set_arch_mach.
	(output_file_close) [BFD_ASSEMBLER]: Call bfd_close, not
	bfd_close_all_done.  Call bfd_perror on failure.
	(output_file_append) [BFD_ASSEMBLER]: Don't define.

	* config/m68kcoff.mt (LOCAL_LOADLIBES): Delete definition.

	* subsegs.h (segment_info_type): Always define.  Omit field scnhdr
	if not MANY_SEGMENTS.  Define new field bfd_section if
	BFD_ASSEMBLER.
	(seg_info): New macro.

	* expr.c, input-scrub.c: Use PARAMS macro.  Deleted unused
	variables, and some irrelevant comments.

	* Makefile.in (ALL_CFLAGS): Include $(BFDDEF).
	(LIBS): Include $(BFDLIB).  Don't bother with $(CLIB).
	* configure.in:  Permit --with-bfd-assembler now, with a warning.
	Variable need_bfd is now a boolean, as is new variable bfd_gas.
	Set BFDDEF and BFDLIB in Makefile when appropriate.

	* as.c: Removed "#ifdef DONTDEF" and "#ifdef comment" code.
	(main): Refer to flag_always_generate_output instead of
	flagseen['Z'].

	* as.c (main) [BFD_ASSEMBLER]: Open output bfd.
	(*_section) [BFD_ASSEMBLER]: Define them.
	(perform_an_assembly_pass) [BFD_ASSEMBLER]: Initialize them, and
	set section flags when appropriate.
	* as.h (SEG_NORMAL) [BFD_ASSEMBLER]: Require that the specified
	section is not absolute, undefined, or an assembler internal one.
	(absolute_section, undefined_section): Always define.
	* expr.c, read.c, symbols.c: Refer to *_section, not SEG_*; break
	switch statements into if-else trees.
	* symbols.c [MANY_SEGMENTS]: Deleted redundant definitions of
	SEG_BSS and SEG_DATA.

	* as.h (frag_now_fix): New macro.
	* symbols.c (colon): Use it.

Wed Jan 27 21:43:53 PST 1993  Ralph Campbell  (ralphc@pyramid.com)

	* config/tc-mips.c:  Added mips support for mips-dec-bsd.
	* config/tc-mips.h:  Added mips support for mips-dec-bsd.
	* config/ho-mipsbsd.h:  Added mips support for mips-dec-bsd.
	* config/mips-opcode.h:  Added mips support for mips-dec-bsd.
	* configure.in:  Added mips support for mips-dec-bsd.
	* atof-generic.c:  Define TRUE and FALSE if not defined.

Thu Jan 21 12:48:19 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* version.c: Bumped version number to 1.93.05.

Wed Jan 20 17:11:53 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* config/obj-coff.c (obj_emit_relocations): Don't use #elif.
	(obj_emit_lineno): Don't need return at end of void function.
	(obj_symbol_new_hook): Ditto.

	* config/tc-m68k.c: Removed some unused code.
	(tc_aout_fix_to_chars): Array nbytes_r_length is now const.

	* config/tc-m68k.h (TC_COUNT_RELOC): Don't emit reloc if only
	offset field is set.

Fri Jan  8 05:44:49 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* config/tc-sparc.c (architecture_requested, warn_on_bump,
	md_relax_table): Use default zero initialization.
	(s_reserve): Since SEG_E2 is equivalent to SEG_BSS, just use the
	latter, instead of selecting with preprocessor conditionals.

Thu Jan  7 08:58:21 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: recognise all sparclite variants

Thu Jan  7 05:25:25 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* read.c (s_data) [!BFD_ASSEMBLER]: Fix typo in 4 Jan change --
	accidentally changed to use subseg_change where it should have
	been subseg_new.

Tue Jan  5 08:42:16 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* expr.c (operand): If character other than comma or newline is a
	logical end-of-line character, use the newline case.
	From Eric Youngdale:
	(operand): Set X_add_number field for floating-point numbers.
	(operand): Treat zero byte as end-of-operand.

	* configure.in (per-target): Look for with_bfd_assembler option.
	For now, only accept "no", until the merge is done.

	Merged changes from Eric Youngdale (youngdale@v6550c.nrl.navy.mil):
	* as.c, flonum-konst.c, hex-value.c, input-file.c, version.c,
	  config/obj-aout.h, config/obj-vms.c: VMS -> HO_VMS.
	* read.c: Finish conversion to S_* macros in the VMS only
	  parts of the program. Add "const" modifier to hex_value.
	* as.c, read.c, symbols.c, write.c: Change "ifdef VMS" to
	  "ifdef OBJ_VMS".
	* expr.c: Add "const" modifier to hex_value.
	* symbols.c: Finish conversion to S_* macros in the VMS only
	  parts of the program.  Add "const" modifier to
	  md_[long,short]_jump_size. Remove declaration of const_flag
	  (which will be declared in obj-vms.h).
	* write.c: Add "const" modifier to md_[long,short]_jump_size.
	  Fix arguments to VMS_write_object_file.
	* config-gas.com: New file.  Script for VMS systems to set up the
	  configuration to build gas for VMS, and create config.status.
	* make-gas.com: Redone to work with new scheme.
	* obj-vms.c: Patch to fix bug where we were not correctly parsing the
	  stabs directives.
	* obj-vms.c:  Define macros COPY_LONG and COPY_SHORT which
	  will swap bytes if needed on a big endian system.  Use throughout
	  as needed.
	* obj-vms.c (obj_aout_stab):  Add code to generate listing file.
	* obj-vms.c (VMS_typedef_parse): Add alias to correctly handle certain
	  types of malformed stabs.  Change parsing algorithm so that we are
	  more certain of having all of the information that we need on hand.
	* obj-vms.c (final_forward_reference):  New function, used to help
	  resolve the data types of as many struct elements as possible
	  when some part of the struct is not fully defined by the compiler.
	* obj-vms.c (VMS_LSYM_Parse):  Correctly handle case of continuation
	  stabs directives.
	* obj-vms.c (VMS_write_object_file): Define all vtable psects
	  as symbols as well in the object file.  Look for external functions
	  that start with "__vt.", and turn them into variables, since the
	  g++ compiler is incapable of doing this.
	* tc-vax.c: Add '1' option for backward compatibility with older GCC
	  versions.
	* bignum-copy.c (bignum_copy): Fix bug where we pad with zeroes.
	* input-scrub.c (as_where): Fix bug where as would crash if we did not
	  have the name of the source file yet.
	* config/ho-vms.h: define HO_VMS, not HO_VAX.

Mon Jan  4 05:17:26 1993  Ken Raeburn  (raeburn@cygnus.com)

	* read.c (s_data): Always use "data_section", since it'll map to
	SEG_DATA or SEG_E1 if needed.
	(s_lcomm): Likewise with bss_section.
	(s_fill): Use memset, not bzero.

Thu Dec 31 04:29:27 1992  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

	* read.c: Deleted some code under "#ifdef DONTDEF" that was for
	handling GDB symbol table data.

	* config/obj-aout.h (segment_name): Delete definition.
	(seg_name): Delete declaration.
	* config/obj-bout.h (segment_name, seg_name): Ditto.
	* config/obj-vms.h (segment_name, seg_name): Ditto.
	* config/obj-coff.h (segment_name): Ditto.
	* config/obj-coffbfd.h (segment_name): Ditto.

	* Changes for BFD_ASSEMBLER:
	* obj.h (obj_crawl_symbol_chain): Declare only if not
	BFD_ASSEMBLER.
	(obj_header_append, obj_pre_write_hook): Ditto.
	* as.h (stdoutput): New var, defined only if BFD_ASSEMBLER.
	(segT) [BFD_ASSEMBLER]: New typedef for "asection *".
	(segment_name) If BFD_ASSEMBLER, look up BFD section name;
	otherwise, use seg_name array.
	(seg_name): Declare only if not BFD_ASSEMBLER.
	(section_alignment): Declare only if not BFD_ASSEMBLER.
	(big_section, reg_section, pass1_section, diff_section,
	absent_section, text_section, data_section, bss_section): If
	BFD_ASSEMBLER, declare as variables; otherwise, declare as macros,
	mapping to segT enum values.
	(tc_aout_fix_to_chars, next_object_file_charP): Force parse errors
	if these are used or defined, if BFD_ASSEMBLER.
	(subseg_set, subseg_new) [BFD_ASSEMBLER]: Functionality of old
	subseg_new split into two functions.
	(SEG_NORMAL): For BFD_ASSEMBLER, always return true, for now.

	* as.h (volatile): Don't define if already defined.
	(had_errors, had_warnings): Provide prototypes for ANSI C even if
	NO_STDARG.
	(as_bad, as_fatal, as_tsktsk, as_warn): For GNU C version 2,
	declare with format attribute for -Wformat checking.

Wed Dec 30 10:18:57 1992  Ian Lance Taylor  (ian@cygnus.com)

	* app.c, config/tc-*.c: Don't include read.h, since it is already
	included by as.h.

	* These are based on patches from Minh Tran-le
	<mtranle@paris.intellicorp.com>.
	* configure.in (i[34]86-ibm-aix*): Accept i486 for host.  Use
	obj_format coffbfd and gas_target i386coff for target.
	(i[34]86-*-isc*): New host (uses sysv).
	* config/i386aix.mt: Removed (no longer used).
	* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
	(MINUS_G): Removed.
	(LDFLAGS): Added, defined as -shlib.
	* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
	* config/te-sco386.h (LOCAL_LABEL): Don't define.
	(DOT_LABEL_PREFIX): Define.
	* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
	name rather than L0\001.
	* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
	local_bss_counter.
	* symbols.c, symbols.h (local_bss_counter): Removed.
	* write.c (write_object_file): bss no longer uses
	local_bss_counter.  Pass correct data and bss size to
	VMS_write_object_file.
	* config/obj-vms.c (VMS_write_object_file): Accept bss size as
	argument, rather than using local_bss_counter.
	* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
	* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
	* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
	(size_section): Restored sanity check.
	(do_relocs_for): Base section address on s_paddr rather than
	computing it.  Adjust a29k R_IHIHALF special case to account for
	section paddr (used to require paddr to be zero).  If there are no
	reclos, set s_relptr to 0.  Set relocation size in object_headers.
	(fill_section): Always set s_vaddr here, removing
	ZERO_BASED_SEGMENTS case.  Force s_scnptr for bss to 0.  Don't set
	NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
	Set STYP_INFO for .comment.
	(coff_header_append): Use object headers and H_{SET,GET}_* macros.
	Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
	(crawl_symbols): Handle 8 character section name correctly.  Use
	H_{SET,GET}_* macros.
	(do_linenos_for): Set lineno size in object_headers.
	(write_object_file): Use H_{SET,GET}_* macros.  Don't bother to
	set s_vaddr here.  If string_byte_count remains 4, set it back to
	0, and only write strings out if there are some.  Call
	fill_section before do_relocs_for and do_linenos_for.
	(obj_coff_section): Handle optional quoted second argument giving
	section characteristics.
	(obj_coff_bss): Added to handle .bss.
	(obj_coff_ident): Added to handle .ident (puts string in .comment
	section).
	(obj_coff_lcomm): Put common symbols in .bss, not .data.
	(fixup_mdeps): Change to segment.  Call frag_wane after
	md_convert_frag.
	(fixup_segment): Explicitly check S_IS_COMMON before making 386
	adjustment (already happened only for common symbols, but this is
	clearer).
	* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
	* config/tc-i386.c (s_bss): Don't use if I386COFF.
	(md_pseudo_table): Ignore .optim and .noopt.
	(tc_coff_sizemachdep): New function.
	* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
	compatibility.
	(LOCAL_LABEL): Removed definition.
	(DOT_LABEL_PREFIX): Defined.

Mon Dec 28 10:32:05 1992  Ken Raeburn  (raeburn@cygnus.com)

	* app.c (app_push): Use memcpy, not bcopy.
	(do_scrub_next_char): For \", return " not '.
	(symbol_chars): Now const.

	* expr.c (operand): If not LOCAL_LABELS_FB, don't look for "0f"
	and "0b".  If LOCAL_LABELS_DOLLAR, check for "0$".

	* config/obj-coff.h: Don't use #elif.

	* config/ho-sunos.h: Don't include sys/stdtypes.h; 4.0.3 doesn't
	have it.  (Reported by Noah Friedman, friedman@gnu.ai.mit.edu.)

Wed Dec 16 12:12:33 1992  Ian Lance Taylor  (ian@cygnus.com)

	* write.c, obj-ieee.c: don't define SUB_SEGMENT_ALIGN if it is
	already defined.

Tue Dec 15 12:40:11 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* app.c (do_scrub_begin): allow single quote strings if so
	configured.

	* config/*z8k*: checkpoint

Sun Dec 13 00:04:38 1992  Ian Lance Taylor  (ian@cygnus.com)

	* read.c (read_a_source_file): avoid calling xmalloc (0).

Sat Dec 12 15:26:34 1992  Ian Lance Taylor  (ian@cygnus.com)

	* listing.c: Call xmalloc, not malloc; don't declare malloc.

	* Changes to support SCO 3.2v4:
	* read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
	SEG_BSS, fill with NOP_OPCODE.
	* config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
	* config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
	using ZERO_BASED_SEGMENTS.
	(fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
	never set segment address for SEG_E2 (.bss) and don't write out
	SEG_E2 contents.  Set .init and .fini sections to STYP_TEXT.
	(obj_coff_endef): Don't merge labels or symbols awaiting forward
	definitions, and don't merge tags with non-tags.  Check for .bf
	rather than just checking whether the second character is b and
	the third character is f.
	(obj_coff_val): gcc can generate values which we don't handle
	correctly; discard information for now, since it only affects the
	debugging information.
	(tag_find_or_name): Don't insert tags in the symbol table.
	(yank_symbols): Don't merge labels.
	(write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
	already defined.  Fill subsegments with NOP_OPCODE, not 0.  Don't
	set segment address if ZERO_BASED_SEGMENTS.
	(obj_coff_section): Accept and ignore a trailing quoted string, as
	used in AT&T i386 syntax.
	(fixup_segment): Take segment as argument.  On the i386, adjust PC
	relative addends by the segment vaddr.
	* tc-i386.h: Define SUB_SEGMENT_ALIGN.
	* tc-a29k.h: Define ZERO_BASED_SEGMENTS.
	* tc-i386.c: (i386_operand): If I386COFF, accept any segment type.

Tue Dec  8 00:06:48 1992  Ken Raeburn  (raeburn@rtl.cygnus.com)

	* config/obj-coffbfd.c: Include libcoff.h.

	* version.c: Now version 1.93.

Mon Dec  7 00:39:09 1992  Ken Raeburn  (raeburn@cygnus.com)

	* config/tc-i386.c (md_pseudo_table): For 386bsd and linux, do
	power-of-two alignment for .align.

	* as.h: If BROKEN_ASSERT, just redefine `assert' to be trivial,
	and leave everything else alone.

Fri Dec  4 16:58:42 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* Makefile.in (as.new): Don't bother saving as.old.

	* write.c: Conditionalize on OBJ_VMS, not VMS.
	(magic_number_for_object_file): Don't define if OBJ_VMS.

	* config/obj-vms.c: Changes for traditional C.

Thu Dec  3 01:24:07 1992  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

	* config/ho-generic.h (malloc, realloc): Declare.

	* Lots of comment/whitespace changes.

	* write.h (struct fix): Some fields reordered, narrowed.

	* read.c (MASK_CHAR): Define using C types, not magic number.

	* as.c, input-file.c: Deleted some unused code.

	* app.c, as.h: Doc fix.

	* flonum-konst.c, flonum-mult.c: Include ansidecl.h.

	* as.h (xmalloc): Argument is long.

	* xmalloc.c (error): Remove declaration; as.h takes care of it.

	* doc/as.texinfo: Regrouped documentation of some command-line
	options.  Updated options documentation for m68k.  Some minor
	wording/punctuation changes.

Mon Nov 30 11:42:11 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* configure.in: Accept target OS "vms".

	* symbols.c:  Merged ANSI and non-ANSI function decls, using
	PARAMS macro.

	* xmalloc.c: Just include as.h, don't bother trying to figure out
	other header files.

	* strstr.c, strerror.c: Deleted.
	* Makefile.in: Deleted references.

	* config/tc-ns32k.c: Don't include header file for string
	declarations; leave that to ho-*.h.

Fri Nov 27 04:11:36 1992  Ken Raeburn  (raeburn at cambridge-laptop.cygnus.com)

	* config/coff_gnu.h [TC_I860]: Guesses for reloc type values,
	imported from FSF sources.

	* messages.c (strerror): Declare unconditionally.

	* as.h: Delete alloca and register definitions.

	* config/atof-ieee.c (mask): Now const.

	* obstack.c, obstack.h: Deleted.

	* as.h (flag_readonly_data_in_text): New flag.
	* as.c (main): Set it for -R.

	* as.h (flag_suppress_warnings): New flag.
	* as.c (main): Set it for -W.
	* messages.c (as_warn): Check it instead of flagseen['W'].

	* as.h (flag_always_generate_output): New flag.
	* as.c (main): Set it for -Z.

	* config/tc-sparc.h: Define NEED_FX_R_TYPE.
	* config/tc-a29k.h: Ditto.
	* write.h (struct fix): Don't conditionalize fx_r_type field on TC
	macros.

	* as.h: Merged ANSI and non-ANSI function decls, using PARAMS
	macro.
	* bignum.h, expr.h, flonum.h, frags.h, input-file.h, listing.h,
	obj.h, output-file.h, read.h, struc-symbol.h, symbols.h, tc.h,
	write.h: Likewise.
	* read.c: Likewise.

	* xmalloc.c: Conditionalize on HAVE_MALLOC_H, not USG.  Fold in
	xrealloc from xrealloc.c.
	* xrealloc.c: Deleted.
	* Makefile.in (REAL_SOURCES, OBJS): Adjusted.

	* configure.in: For host CPU a29k, rs6000, vax, consider using bsd
	or vms ho- files.

	* config/ho-sysv.h (setbuffer, HO_USG): Deleted.

	* config/atof-ieee.c (atof_ieee): Exponent field isn't a pointer;
	don't initialize it with NULL.

	* config/ho-vax.h (M_VAX): Deleted; was unused.

	* README-vms, config/ho-vms.h, config/obj-vms.c, config/obj-vms.h:
	New files imported from FSF version, contributed by Eric Youngdale.
	* README-vms-dbg, config/vms: Deleted.

	* ChangeLog, config/ChangeLog: Merged.

	* config/*tahoe*, configure.in: Tahoe support brought in from FSF
	version.

	* input-file.c (input_file_open): Eliminate call to setvbuf.
	[USG] (setbuffer): Deleted macro.

Mon Nov 23 11:00:16 1992  Ken Raeburn  (raeburn@cygnus.com)

	* all files: Whitespace changes for GNU indentation style, done by
	GNU `indent'.  Some cleanup still needed, especially of comments.

	* configure.in: No te-386bsd.h file exists; don't try to use it.

	* obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.

	* tc-m68k.c (md_assemble): Don't complain about 68000 with 68881;
	could be doing emulation.

Thu Nov 19 11:47:19 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
    
    	z8000 documentation
	* doc/Makefile.in, doc/all.m4, doc/as-all.texinfo, doc/as.texinfo:
	all modified.

Tue Nov 10 09:49:24 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in (as.o, obj-format.o): added dependency on subsegs.h.

	* subsegs.h: add extern to segment_info declaration.

	* read.h: added extern declarations for comment_chars,
	line_comment_chars, and line_separator_chars.
	read.c, app.c: removed definitions of comment_chars,
	line_comment_chars, and line_separator_chars.

	* tc-m68k.c (m68k_reg_parse): If REGISTER_PREFIX isn't defined,
	still accept (but don't require) OPTIONAL_REGISTER_PREFIX before
	the register name.
	(insert_reg): put REGISTER_PREFIX before register names before
	putting them in the symbol table.
	* tc-m68k.h (OPTIONAL_REGISTER_PREFIX): Define to be "%", if not
	M68KCOFF.

	* obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
	section.

	* atof-ieee.c, atof-ns32k.c, tc-*.c: made EXP_CHARS, FLT_CHARS,
	comment_chars, line_comment_chars and line_seperator_chars
	consistently const, and always initialized them.  Included read.h.

Thu Nov  5 17:55:41 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* tc-sparc.c (sparc_ip): Add code to flag error if an absolute
	constant will not fit in an immediate field.
	(md_apply_fix, RELOC_BASE13 case): Check for relocation overflow.

Wed Nov  4 07:50:46 1992  Ken Raeburn  (raeburn@cygnus.com)

	* obj-coff.c (callj_table): Delete global variable.
	(obj_emit_relocations): Define it locally here, and only if
	TC_I960 is defined.

	* tc-m68k.c (m68k_reg_parse): Underscore is part of a symbol name.
	(m68k_ip): Don't warn about bignum used as float bit-pattern.

	* obj-coff.c: Replaced ANSI and non-ANSI function declarations
	with a single set using PARAMS macro.

	* tc-i960.c (tc_bout_fix_to_chars): Bit-field fixups want a length
	of 2.

	* tc-i960.c: Missed a couple of 0->NO_RELOC conversions.

	* tc-i960.h (N_BALNAME, N_CALLNAME): Define as char-type values,
	so widening works consistently.

Wed Oct 28 08:52:34 1992  Ken Raeburn  (raeburn@cygnus.com)

	* version.c: Put conditional "const" before version_string, not
	before dummy function for VMS.  Now version 1.91.03.

	* app.c (do_scrub_next_char): Need double-\ before `000' to show
	printed rep of null character.

Fri Oct 23 14:40:38 1992  Ian Lance Taylor  (ian@cygnus.com)

	* obj-coffbfd.c (write_object_file): check return value of
	bfd_close_all_done.

Tue Oct 20 12:18:08 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Support for i386-sysv.
	obj-coffbfd.c (do_relocs_for, write_object_file): set segment
	addresses to reasonable sizes.  New define ZERO_BASED_SEGMENTS can
	be used to set them all to zero as was done before.
	(fill_section): segment addresses now set in write_object_file.
	(fill_section): Don't set STYP_NOLOAD for .bss section.
	(fixup_segment): 386 uses strange common symbol format.
	tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
	compatibility with SVR3.2 linker.
	* configure.in: i386-sysv and i386-sco use coffbfd.

	* app.c (do_scrub_next_char): discard whitespace after a label.

Sat Oct 10 12:33:45 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: differentiate between SunOS 4 and Solaris2 for Sun4
	hosts, use the sysv configuration for solaris2

Mon Oct  5 09:28:57 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	 fix i960+non-bfd coff bit rot. 
	* obj-coff.c (c_dot_file_symbol, obj_coff_ln, obj_coff_line):
	support for C source listings. (obj_coff_endef): look in the right
	part of the symbol for the symbol name

	* tc-m68k.c (get_num): make it work for all segments, not just the
	first three.

Mon Oct  5 03:30:36 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)

	* configure.in:	recognize i386-*-bsd emulation.

Thu Oct  1 23:05:12 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: use the cpu-vendor-os triple for host and target

Tue Sep 29 12:22:52 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* obj-coffbfd.c (write_object_file): don't fixup for the z8k
	* tc-z8k.c: lots of bug fixes

Tue Sep 29 10:51:55 1992  Ian Lance Taylor  (ian@cygnus.com)

	* tc-i960.h, tc-i960.c: avoid the ANSI preprocessor addition
	#elif, since it is not supported by old compilers.
	ho-rs6000.h, tc-m68k.c: the native RS/6000 compiler miscompiles a
	couple of expressions in tc-m68k.c.

Mon Sep 28 21:18:24 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* read.c (cons): If NO_RELOC is defined, use it.

	* tc-i960.c (get_cdisp): Use NO_RELOC, not 0, in call to fix_new.

Fri Sep 25 18:18:52 1992  Ian Lance Taylor  (ian@cygnus.com)

	* tc-m68k.h: if M68KCOFF, define DOT_LABEL_PREFIX (to require
	local labels to start with a .) and set REGISTER_PREFIX to %.
	tc-m68k.c (m68k_reg_parse): accept REGISTER_PREFIX if defined.

Fri Sep 25 17:53:43 1992  John Gilmore  (gnu@cygnus.com)

	* messages.c:  Comment changes.

Fri Sep 25 14:12:58 1992  Ken Raeburn  (raeburn@kyriath.cygnus.com)

	* as.h: Test if __STDC__ is defined only, don't test its value.
	* messages.c: If __STDC__ is not defined, define NO_STDARG.

Thu Sep 24 12:42:32 1992  Brendan Kehoe  (brendan@rtl.cygnus.com)

	* listing.c (debugging_pseudo): Add stabs and stabn as things to
	ignore.

Tue Sep 22 13:02:07 1992  Sean Eric Fagan  (sef@cygnus.com)

	* obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
	sections starting from zero, rather than making them consecutive.
	This makes subsequent reloc calculations easier, esp if the object
	format doesn't understand addends. (obj_coff_lcomm): (maybe temporarily)
	allocate lcomm in .data rather than in .bss.  It seems that some
	tools can't cope with a non-zero sized bss before linkage.
 
Tue Sep 22 15:10:51 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* tc-m68k.c: Replace "enum m68k_architecture" with "int"
	throughout.  That enum no longer means what we thought it meant.

	* tc-m68k.c (md_assemble, md_parse_option): Handle new
	"-mno-688[58]1" options.

	* tc-m68k.c: Added CPU32 support.

Fri Sep 18 08:02:18 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* tc-m68k.c (m68k_ip): An(disp) is not pc relative.

Tue Sep 15 17:25:05 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* Makefile.in (as.new): Remove dependence on LOCAL_LOADLIBES.
	Change LIBDEPS dependence to LIBS.

Tue Sep 15 15:32:02 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in (install): if $(tooldir) exists, install as in
	$(tooldir)/bin.

Sun Sep 13 20:30:10 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Added WARN_SIGNED_OVERFLOW_WORD define to give an error if any
	.word is < -32768 or > 32767.  The -J flag causes the error to be
	ignored.  This is to catch over-sized switches generated by gcc on
	systems which don't support the broken .word hack.
	as.c (main): permit -J if WARN_SIGNED_OVERFLOW_WORD.
	write.c (fixup_segment): check for signed .word overflow if
	WARN_SIGNED_OVERFLOW_WORD.

	* write.c (fixup_segment): fixed missing parens in expression
	checking for byte or word overflow.

	* obj-coffbfd.h: define WARN_SIGNED_OVERFLOW_WORD.
	obj-coffbfd.c (fixup_segment): check for signed .word overflow if
	WARN_SIGNED_OVERFLOW_WORD.

	* obj-coffbfd.c (fixup_segment): fixed missing parens in
	expression checking for byte or word overflow.

Fri Sep 11 10:21:04 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	Support for i386 coff
	* obj-coffbfd.h : added stuff 
	* tc-i386.c (tc_coff_fix2rtype): new function
	* tc-i386.h : new coff defines

Thu Sep 10 09:23:15 1992  Ian Lance Taylor  (ian@cygnus.com)

	* input-scrub.c (input_scrub_push): call input_file_begin, not
	input_scrub_begin.
	messages.c (as_perror): print ": " between the passed in error and
	the strerror, like perror does.

Wed Sep  9 11:06:25 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in: use gas_target instead of modifying target_cpu.
	From Steve Chamberlain:
	Makefile.in: Handle m68*-*-coff*.
	read.c, read.h: add mult argument to s_space

	* tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
	 Motorola and MIT syntax; gas can now assemble either type of
	 file.
	tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
	From Steve Chamberlain:
	m68kcoff.mt: for m68k COFF.
	obj-coffbfd.c: (fixup_mdeps) added
	 (size_section) removed bad sanity check
	 (fill_section) added rs_machine_dependent case
	 (write_object_file) call fixup_mdeps
	 (fixup_segment) set fx_subsy to 0.
	obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
	 handle m68k.
	tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
	 pseudo ops.

Tue Sep  8 17:10:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* Makefile.in (LIBS): Include opcode library.

Fri Sep  4 18:20:56 1992  Ken Raeburn  (raeburn@cygnus.com)

	* config/tc-m68k.c (get_num, case SEG_BIG): If only small integers
	including zero are accepted, pass +0.0.

Sun Aug 30 21:24:46 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in: map "as" through program_transform_name when
	installing.

	* doc/Makefile.in: map "as" through program_transform_name when
	installing.

Sat Aug 29 12:11:12 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* Makefile.in (as.new): Depend on LOCAL_LOADLIBES.

Fri Aug 28 16:25:22 1992  Ian Lance Taylor  (ian@cygnus.com)

	* obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
	tc-i960.c (md_ri_to_chars): Always output bout object file in
	little endian byte order (used to use endianness of host).

Tue Aug 25 15:50:48 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* config/tc-m68k.c (init_table): Now const.  Always include 68851
	data, so that "bc" is available to 68040 cache instructions.
	Added "tt0", "tt1", and 68ec030 variants.
	(md_assemble): Complain if 68000 (only) and 68881 are specified.
	(enum _register): Added TT0, TT1.
	(m68k_ip, cases '3' and 't'): Handle new operand type codes.  Pass
	line number correctly in "internal error" messages.  Don't print
	architecture-mismatch message for operand errors.

	From Colin Smith (colin@wrs.com):
	* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather
	than install_operand.

Tue Aug 25 15:13:48 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* listing.c (buffer_line): rewind to the start of include
	files, they might be included twice.

	* z8k.c, z8k.h, z8k.mt: z8000 support stuff

Mon Aug 24 12:45:43 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in: defined TARGET_CPU for C code so that it can choose
	one element of a family.

	* tc-m68k.c: use TARGET_CPU to choose default cpu type.

	* te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
	so that we can assemble hand-written libgcc code.

Fri Aug 21 14:38:44 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* messages.c (as_warn): Use fputs, not fprintf, with a buffer that
	has already been formatted (but may still contain %-characters).
	(as_bad): Likewise.

Wed Aug 19 11:20:59 1992  Ian Lance Taylor  (ian@cygnus.com)

	* tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
	written with indirection on the last two operands, which can be
	either data or address registers.  Added a new operand type 'r'
	which accepts either register type.  Added '(' to notend stuff in
	tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.

Wed Aug 19 09:25:09 1992  Ken Raeburn  (raeburn@cygnus.com)

	* as.h (enum _relax_state): Start off at one, not zero, to better
	catch uninitialized-variable errors.
	(linkrelax): Declare new variable.

	* messages.c (warning_count, error_count): Default initializer is
	sufficient.

	* write.c: Merged some declarations, using PARMS macro.
	(text_frag_root, data_frag_root, bss_frag_root, text_last_frag,
	data_last_frag): No longer static.
	(write_object_file, case rs_align or rs_org): If HANDLE_ALIGN is
	defined, call it.  Change segments before calling fixup_segment.
	(relax_align): If linkrelax, provide extra padding.

	* obj-bout.c (obj_emit_relocations): Emit alignment relocs despite
	their not having symbols associated.

	* tc-i960.c (norelax, instrument_branches): Default initializer is
	sufficient.
	(linkrelax): Delete variable definition.
	(mem_fmt): Call fix_new with NO_RELOC.
	(tc_bout_fix_to_chars): Handle alignment relocs.
	(i960_handle_align): New function.
	* tc-i960.h (linkrelax): Delete declaration.
	(HANDLE_ALIGN): New macro; calls i960_handle_align.
	(NEED_FX_R_TYPE, NO_RELOC): New macros.

Tue Aug 18 14:59:21 1992  Ken Raeburn  (raeburn@cygnus.com)

	* config/sparc.mt: New file.  Grab sparc opcode table from bfd
	library.

Tue Aug 18 14:16:38 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in: always create installation directories.  Removed
	MINUS_G, set CFLAGS to default to -g, added FLAGS_TO_PASS, passed
	FLAGS_TO_PASS to recursive makes.

	* doc/Makefile.in: always create installation directories.

Mon Aug 17 15:09:56 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* input-scrub.c (input_scrub_pop, input_scrub_push): memcpy was
	being used with args swapped, causing occasional lossage when
	refilling buffers after an include file.

Mon Aug 17 13:18:51 1992  Ken Raeburn  (raeburn@cygnus.com)

	* messages.c (as_tsktsk): Use correct ANSI form for stdarg
	version.  Discard bogus DONTDEF version.
	(as_warn, as_bad, as_fatal): Likewise.

Fri Aug 14 18:31:14 1992  Ken Raeburn  (raeburn@cygnus.com)

	* config/tc-m68k.c (m68k_ip): If instruction is invalid for the
	selected architecture, print a message saying so and listing what
	processors support it, rather than saying "operands mismatch".

Thu Aug 13 13:53:19 1992  Ken Raeburn  (raeburn@cygnus.com)

	* as.h [BROKEN_ASSERT]: If defined, turn off all assertion checks.

	* config/ho-rs6000.h (M_RS6000): Don't define it.
	(free): Declare it.
	(BROKEN_ASSERT): Define it if not __STDC__.

Tue Aug 11 12:58:14 1992  Ken Raeburn  (raeburn@cygnus.com)

	* sparc.mt: New file.

Mon Aug 10 14:37:08 1992  Per Bothner  (bothner@cygnus.com)

	* tc-m68k.c: ".align N" means align to N-byte boundary *only*
	if TN_SUN3; otherwise align to 2**N-byte bounary.

Thu Aug  6 12:10:39 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* read.c (s_fill): make the .fill size clamped error a warn and
	fix bug where 0's were always placed.

	* config/tc-h8300.c: if a :8 is seen after an operand, fill top
	two bytes of any constant with 0xff:

Wed Aug  5 12:02:40 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* config/tc-m68k.c (md_pseudo_table): fix the .align thing
	the right way; for just the 68k. Sun 3 .align is nbytes, not ptwo.

Wed Aug  5 01:54:34 1992  John Gilmore  (gnu at cygnus.com)

	* tc-m68k.c (try_index):  Error if index scaling specified and
	assembling for an older CPU than a 68020.

Sat Aug  1 19:10:13 1992  Ken Raeburn  (raeburn@cygnus.com)

	* config/tc-sparc.c (tc_aout_fix_to_chars): If pc-relative, take
	fx_offset into account.

Fri Jul 31 21:53:28 1992  Ken Raeburn  (raeburn@cygnus.com)

	* configure.in (mips host): Accept "ultrix" with version number.

	* expr.c (floating_constant): Separate "=-" to avoid confusing
	ancient or broken compilers.

	* config/tc-m68k.c (m68k_ip): Mismatch error could also indicate
	processor/opcode mismatch, so reword the error message.
	(md_assemble): If no CPU has been set (even if FPU/PMMU
	characteristics have been), default to 68020.  Don't need extra
	quotes around error string.

Fri Jul 31 12:26:34 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* read.c (potable): Revert sac's incorrect change made Jul 13.
	Align really is supposed to be ptwo not nbytes.

Mon Jul 20 02:51:59 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

	* Makefile.in: _Do_ include libiberty.  (from sef)

Fri Jul 17 15:15:28 1992  Ken Raeburn  (raeburn@cygnus.com)

	* expr.c (integer_constant): Handle "0f" and "0b" label references
	properly.

Thu Jul 16 08:20:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* write.c (fixup_segment): if relaxing, don't do anything.
	* config/obj-bout.[ch] : maintain the a_relaxable file header info
	* config/tc-i960.c: new option -linkrelax

Mon Jul 13 14:11:36 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* expr.c (expr): allow SEG_BSS in expressions
	* read.c (potable): align should be nbytes, not ptwo!
	* write.c (write_object_file): extra glue for new bss attributes
	(relax_segment): SEG_BSS is ok now
	* config/tc-m68k.c (m68k_ip_op): can now parse more @( modes

Mon Jul  6 17:09:32 1992  Steve Chamberlain  (sac@cygnus.com)

	* obj-coffbfd.c (fill_section): mark .lit sections as STYP_LIT

Mon Jun  1 16:20:22 1992  Michael Tiemann  (tiemann@cygnus.com)

	* configure.in: recognize m680x0 as having sun3 emulation mode for
	vxworks environment.


Tue Jun 30 20:25:54 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

	* Makefile.in: Add program_suffix (parallel to program_prefix)

Wed Jun 24 10:57:54 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* app.c (process_escape): new function to handle escapes the right
	way, (do_scrub_next_char): use new function
	* cond.c (s_ifdef): do ifdef/ifndef right
	* read.c (s_fill): make the , expressions optional like the doc
	says
	* config/tc-h8300.[ch]: better warnings

Tue Jun  9 07:54:54 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* subsegs.c (subsegs_begin): create bss0_frchainP in the same was
	as data0_frchainP

	* write.c (write_object_file): various changes to handle data in
	the BSS segment in much the same was as stuff in the DATA segment. 

	* tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
	pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
	68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
	the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
	it into SEG_BSS

Thu Jun  4 11:59:13 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* expr.c(expr): allow SEG_REGISTER in expressions.
	* read.c(pseudo_set): register expressions can be the source of a
	set.
	* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
	goto SEG_TEXT (if a.out)
	* write.c (write_object_file): If a.out don't use the old way for
	-R.
	* config/obj-a.out (s_sect): complain if the user tries to use a
	subsegment with a value which might interfere with out -R hackery.
	* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
	rather than use ugly if tree. (init_regtable): insert register
	names into symbol table.

Tue Jun  2 16:47:09 1992  Steve Chamberlain (sac@cygnus.com)

	* write.c (write_object_file): keep the fix_tail clean, which
	fixes a bug in -R where relocations were being lost.

Mon Jun  1 16:20:22 1992  Michael Tiemann  (tiemann@cygnus.com)

	* configure.in: recognize m680x0 as having sun3 emulation mode for
	vxworks environment.

Sun May 31 05:33:00 1992  david d `zoo' zuhn (zoo@cygnus.com)

 	* configure.in: recognize m680x0 as an m68k

Thu May 28 11:22:02 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* configure.in: Recognize sparclite as a sparc variant.

	* tc-sparc.c: Use new ARCHITECTURES_CONFLICT_P macro.  Mention new
	-Asparclite flag.

Tue May 26 16:47:56 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* config/tc-a29k.c: lint
	* listing.c, expr.c: patches from Andrew Smith

Thu May 14 17:22:48 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* doc/Makefile.in: use m4 rather than gm4.

Mon May  4 18:56:19 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* obj-coffbfd.c: use is a synonym for section, (do_relocs_for):
	calc the base of relocs correctly.
	* tc-a29k.c (parse_operand): allow expressions to be in any section.

Mon Apr 27 13:13:31 1992  K. Richard Pixley  (rich@cygnus.com)

	* as.c, write.c: use -K rather than -k for the broken word warning
	  option.

Tue Apr 21 13:35:30 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: do not print recursion lines.

Wed Apr 15 21:19:31 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: the tooldir copy of gas goes directly in tooldir.

Tue Apr 14 14:50:22 1992  Ken Raeburn  (Raeburn@Cygnus.COM)

	* write.c (write_object_file): For b.out format, round up section
	start addresses to match required alignment.

Thu Apr  9 05:45:29 1992  Ken Raeburn  (Raeburn@Cygnus.COM)

	* Makefile.in (install): Install into $(tooldir)/bin, since that's
	where gcc looks for it.

Tue Apr  7 15:12:15 1992  Sean Eric Fagan  (sef@cygnus.com)

	* Makefile.in:  Changed some lines to be less confusing for some
	makes.

	* input-file.c:  Conditionalize on _IOFBF, not VMS.

	* read.c, write.c:  Change a series of ifdef/elif to
	ifdef/else/ifdef etc.

Fri Mar 27 12:21:16 1992  K. Richard Pixley  (rich@cygnus.com)

	* symbols.c (fb_label_init): fix sizeof to memset.

Fri Mar 13 15:45:44 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: install the man page.

	* Makefile.in: pass down MAKEINFO explicitly on info.

	* doc/Makefile.in: use $(MAKEINFO) not makeinfo.

Fri Mar 13 08:03:03 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* flonum-const.c: renamed flonum-konst.c to stop dos name
	conflict.

Thu Mar 12 04:42:38 1992  K. Richard Pixley  (rich@cygnus.com)

	* tc-m68k.h, te-sun3.h: moved LOCAL_LABELS_FB definition from
	  tc-m68k.h to te-sun3.h. 

Wed Mar 11 23:32:42 1992  K. Richard Pixley  (rich@cygnus.com)

	* configure.in: vxworks68 gets te-sun3.h.

	* expr.c: remove limitation that local_labels_dollar or
	  local_labels_fb must be < 10.

	* symbols.c: remove local_labels_dollar, replace with a function
	  interface for a sparse array.  All users adjusted.

	* te-sun3.h: add LOCAL_LABELS_DOLLAR.

Sat Mar  7 00:06:25 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* doc/Makefile.in: commented out line for building as-all.texinfo.
	  This is temporary.

	* doc/as.texinfo, doc/as-all.texinfo: added menu item hooks.

Fri Mar  6 21:57:18 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: added check target.

Tue Mar  3 15:45:56 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: added tooldir and program_prefix.

Sun Mar  1 04:43:19 1992  Michael Tiemann  (tiemann@cygnus.com)

	* write.{c,h} (fix_new): Make these declarations consistent.

Sat Feb 29 13:59:10 1992  Michael Tiemann  (tiemann@cygnus.com)

	* Makefile.in (strerror.o): Add rule so that broken Sun make can
	work in subdirs.

Wed Feb 26 19:26:28 1992  Steve Chamberlain  (sac at thepub.cygnus.com)

	* read.c, obj-coffbfd.c : fix h8300 specific bit rot

	* expr.c (operand): if can't work out what sort of operand it is,
	then look through FLT_CHARS for a hint.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in, configure.in: removed traces of namesubdir,
	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
	  copyrights to '92, changed some from Cygnus to FSF.

	* doc/Makefile.in, doc/configure.in: removed traces of namesubdir,
	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
	  copyrights to '92, changed some from Cygnus to FSF.

Tue Feb 25 14:17:15 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

	* expr.c: If an expression is single comma, then return with
	SEG_ABSENT rather than an error - since the sparc front end does
	really strange things with things like fbge,a 

	* as.h: include bfd.h if using many sections
	* expr.c: LOCAL_LABELS_FB had been changed to lower case - so
	local labels didn't work.
	* listing.c (list_symbol_table): don't core dump when there's no
	symbol there.
	* write.c, write.h: call fix_new with the right number of args on
	the H8.
	* config/tc-h8300.[ch] : fix bugs reported by HMSI, and make
	errors nices

Sat Feb 22 12:26:28 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

	* app.c: MRI compatibility - allow single quote to start a string.
	* as.c: fix typo recently introduced.
	* as.h : Don't include aout/reloc.h - it's not right for COFF!
	* expr.c: Much rewriting, to accomodate MRI syntax for
	expressions. Also easier to read now.
	* listing.c: Put back defuns
	* read.c: modified to accept MRI syntax, put back listing pseudo
	ops so that an assembler built with NO_LISTING ignores list ops
	rather than pukes.
	* write.c, write.h: fixs - only keep a reloc type in a fix if the target
	machine is a SPARC or a 29K.
	* config/obj-aout.c: added s_sect pseudo op
	* config/obj-coffbfd.c: lints, set the filehdr flags right and
	fill in the timestamp.
	* config/obj-coffbfd.h: Since we don't include aout/reloc.h
	anymore, define all the relocs which the tc-<x> bit will use so we
	can translate from them to the coff types.
	* config/tc-a29k.c: reloc_type isn't ane enum any more
	* config/tc-m68k.c: Added NO_RELOC definition.

Fri Feb 21 06:21:07 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: put header files before C source for TAGS; remove
	  references to non-existent syscalls.h.

	* read.c, write.c subsegs.c: back out the .bss changes.

	* obj-aout.c: do not include stab.gnu.h if NO_LISTING.

	* tc-i860.c, a.out.gnu.h: move i860 relocs to a proper place.

	* a.out.h: removed.

Fri Feb 21 01:08:48 1992  Minh Tran-Le (TRANLE@INTELLICORP.COM)

	* symbols.c (local_label_name): symbols now start with ^A.

	* read.c, subsegs.c, write.c obj-coff.c: added handling of
	  `.bss` pseudo op for unitialized data. The new gcc (1.37.9x)
	  generate these sections.  .align: will use NOP_OPCODE or 0
	  for padding. This is just for being nice to the
	  disassembler.

	* expr.c (operand): changed to generate local label "\001L0"
	  starting with a ^A so that it is recognized as a local label.

	* as.c (perform_an_assembly_pass): zero bss_fix_root, too.

	* tc-i386.c: tc-i386.c: added handling of the following opcodes:
	  i/o opcodes - inb, inw, outb and outw.  string manipulation with
	  att syntax - scmp, slod, smov, ssca, ssto.

	* obj-coff.c: (for aix386) Moved the symbols .text, .data and .bss
	  to just after .file .

	  In obj_crawl_symbol_chain() where it tries to put the external
	  symbols apart, with the condition:
	    (!S_IS_DEFINED(symbolP) &&
	     !S_IS_DEBUG(symbolP) &&
	     !SF_GET_STATICS(symbolP))
	  it was moving too many symbols out. So I switch it back to the
	  condition:
	    (S_GET_STORAGE_CLASS(symbolP) == C_EXT && !SF_GET_FUNCTION(symbolP))

	  In obj_emit_relocations() added the conditional on KEEP_RELOC_INFO
	  so that we don't use the F_RELFLG which make the linker complain
	  that somebody has stripped the relocation info.

	  Also, the AIX ld program require that the relocation table
	  is sorted by r_vaddr like the standard ATT assembler does.

	  [he also changed the sizeof(struct ...)'s into the coff
	  style FOOSZ macros.  I'm not sure this is right, but I can't
	  remember why.  xoxorich.]

Fri Feb 21 01:08:48 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in, configure.in, doc: use the doc.  Build it, install
	  it, clean it, etc.

Tue Feb 18 02:21:25 1992  K. Richard Pixley  (rich at cygnus.com)

	* read.c: white space and comments only.

	* configure.in: use the new atof-ns32.c for ns32k.

	* write.c: comment change only.

	* tc-m88k.[hc]: pulled in from hack's unfinished work.  These
	  aren't yet integrated.

	* tc-i860.[hc]: blew off the dust.  Something must still be done
	  about conflicting relocation types.

	* tc-ns32k.c: Replaced previous tc_aout_fix_to_chars stub with the
	  real thing.

	* tc-i960.c, tc-sparc.c: white space and comments only.

	* tc-a29k.h: delete duplicate macro definition.

	* new file atof-ns32k.c copied from hack's last unreleased gas.

Mon Feb 17 07:51:06 1992  K. Richard Pixley  (rich at cygnus.com)

	* config/tc-ns32k.c: actually make tc_aout_fix_to_chars work
	  rather than abort.
				       
	* nearly everything.  flush ChangeLog, package as gas-1.92.1.
	  ChangeLog's prior to this are sketchy at best.  I have logs.
	  They just aren't ChangeLogs.