path: root/gas/ChangeLog

2017-10-19  Palmer Dabbelt  <palmer@dabbelt.com>

	* config/tc-riscv.c (md_apply_fix): Mark
	BFD_RELOC_RISCV_PCREL_HI20 as relaxable when relaxations are
	enabled.

2017-10-19  Nick Clifton  <nickc@redhat.com>

	PR 21621
	* config/tc-avr.h (struct avr_frag_data): Add prev_opcode field.
	(TC_FRAG_INIT): Define.
	(avr_frag_init): Add prototype.
	* config/tc-avr.c (avr_frag_init): New function.
	(avr_operands): Replace static local 'prev' variable with
	prev_opcode field in current frag.
	* testsuite/gas/avr/pr21621.s: New test source file.
	* testsuite/gas/avr/pr21621.d: New test driver file.
	* testsuite/gas/avr/pr21621.s: New test error output file.

2017-10-19  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* testsuite/gas/all/fill-1.s: Use normal labels.  Change .text to
	.data. Pick different values.  Use .dc.w instead of .word.
	* testsuite/gas/all/fill-1.d: New objdump output check.
	* testsuite/gas/all/gas.exp: Use run_dump_test to execute fill-1
	testcase.

2017-10-18  Palmer Dabbelt  <palmer@dabbelt.com>

	* testsuite/gas/all/align.d: Mark as unsupported on RISC-V.
	testsuite/gas/all/relax.d: Likewise.
	testsuite/gas/all/sleb128-2.d: Likewise.
	testsuite/gas/all/sleb128-4.d: Likewise.
	testsuite/gas/all/sleb128-5.d: Likewise.
	testsuite/gas/all/sleb128-7.d: Likewise.
	testsuite/gas/elf/section11.d: Likewise.
	testsuite/gas/all/gas.exp (diff1.s): Likewise.

2017-10-18  Nick Clifton  <nickc@redhat.com>

	PR gas/22304
	* testsuite/gas/cris/range-err-1.s: Remove spurious xfails.
	* testsuite/gas/cris/cris.exp: Expect the shexpr-1 test to pass.

2017-10-18  Nick Clifton  <nickc@redhat.com>

	* po/sv.po: Updated Swedish translation.

2017-10-16  Sandra Loosemore  <sandra@codesourcery.com>
	    Henry Wong  <henry@stuffedcow.net>

	* config/tc-nios2.c (nios2_translate_pseudo_insn): Check for
	correct number of arguments.
	(md_assemble): Handle failure of nios2_translate_pseudo_insn.
	* testsuite/gas/nios2/illegal_pseudoinst.l: New file.
	* testsuite/gas/nios2/illegal_pseudoinst.s: New file.
	* testsuite/gas/nios2/nios2.exp: Add illegal_pseudoinst test.

2017-10-12  James Bowman  <james.bowman@ftdichip.com>

	* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
	K15.
	(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.

2017-10-11  Nick Clifton  <nickc@redhat.com>

	PR 21977
	* listing.c (listing_newline): Use the name of the current
	physical input file, rather than the current logical input file,
	unless including high level source in the listing.
	* input-scrub.c (as_where_physical): New function.  Returns the
	name of the current physical input file.
	* as.h: Add prototype for as_where_physical.

2017-10-09  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* testsuite/gas/s390/zarch-arch12.d (prno, tpei, irbm): New
	instructions added.
	* testsuite/gas/s390/zarch-arch12.s: Likewise.
	* testsuite/gas/s390/zarch-z13.d: Rename ppno to prno.

2017-10-09  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

        * testsuite/gas/all/fill-1.s: Replace nop with .word 42

2017-10-09  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

        * read.c (s_fill): Invoke expression instead of
        get_known_segmented_expression.
        * testsuite/gas/all/fill-1.s: New testcase.
        * testsuite/gas/all/gas.exp: Run fill-1 testcase

2017-10-05  Nick Clifton  <nickc@redhat.com>

	PR 22133
	* config/tc-msp430.c (parse_exp): Skip an 'h' suffix to constant
	expressions.
	(msp430_srcoperand): Check that the entire text was parsed by
	parse_exp.
	(msp430_operands): Likewise.
	* testsuite/gas/msp430/pr22133.s: New test file.
	* testsuite/gas/msp430/pr22133.d: New test driver.
	* testsuite/gas/msp430/pr22133.s: Expected error output.
	* testsuite/gas/msp430/msp430.exp: Run the new test.

2017-10-04  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/21167
	* testsuite/gas/elf/elf.exp: Run group3.
	* testsuite/gas/elf/group3.d: New file.
	* testsuite/gas/elf/group3.s: Likewise.

2017-10-05  Alan Modra  <amodra@gmail.com>

	PR 21167
	* config/obj-elf.c (struct group_list): Delete elt_count.
	(groups): New static.
	(build_group_lists): Don't count elements.
	(elf_adjust_symtab): Use "groups" rather than auto "list".  Set up
	pointer from group member to SHT_GROUP section.  Don't size
	SHT_GROUP section or clean up here..
	(elf_frob_file_after_relocs): ..do so here instead.
	* testsuite/gas/arc/jli-1.d,
	* testsuite/gas/elf/groupautob.d,
	* testsuite/gas/mips/compact-eh-eb-2.d,
	* testsuite/gas/mips/compact-eh-eb-5.d,
	* testsuite/gas/mips/compact-eh-el-2.d,
	* testsuite/gas/mips/compact-eh-el-5.d: Adjust.

2017-10-01  Alexander Fedotov  <alfedotov@gmail.com>

	* testsuite/gas/ppc/vle-mult-ld-st-insns.s: New file: Tests the
	support for the VLE multiple load/store instructions.
	* testsuite/gas/ppc/vle-mult-ld-st-insns.d: New file: Test
	driver.
	* testsuite/gas/ppc/ppc.exp: Run it.

2017-09-27  Nick Clifton  <nickc@redhat.com>

	PR 22179
	* testsuite/gas/riscv/fmv.x.s: New file: Tests the support for the
	renamed fmv.x.s and fmv.s.x instructions.
	* testsuite/gas/riscv/fmv.x.d: New file: Test driver.

2017-09-21  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/elf_mach_5900.d: New test.
	* testsuite/gas/mips/mips.exp: Run it.

2017-09-21  James Cowgill  <James.Cowgill@imgtec.com>

	PR gas/21762
	* config/tc-mips.c (s_mips_stab): Insert call to
	file_mips_check_options.
	* testsuite/gas/mips/micromips@stabs-symbol-type.d: New test.
	* testsuite/gas/mips/mips.exp: Run the new tests.
	* testsuite/gas/mips/mips16@stabs-symbol-type.d: New test.
	* testsuite/gas/mips/stabs-symbol-type.d: New test.
	* testsuite/gas/mips/stabs-symbol-type.s: New test source.

2017-09-21  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.h (EH_FRAME_ALIGNMENT): Define.

2017-09-14  Alan Modra  <amodra@gmail.com>

	PR 22127
	* write.c (resolve_reloc_expr_symbols): Don't segfault when
	sec has been set to NULL.

2017-09-09  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (NOTRACK_PREFIX): Removed.
	(REX_PREFIX): Updated.
	(MAX_PREFIXES): Likewise.
	(parse_insn): Remove restriction on NOTRACK prefix position.
	* testsuite/gas/i386/notrack.s: Add tests with NOTRACK prefix
	before other prefixes.
	* testsuite/gas/i386/x86-64-notrack.s: Likewise.
	* testsuite/gas/i386/notrackbad.s: Remove tests with NOTRACK
	prefix before other prefixes.
	* testsuite/gas/i386/x86-64-notrackbad.s: Likewise.
	* testsuite/gas/i386/notrack-intel.d: Updated.
	* testsuite/gas/i386/notrack.d: Likewise.
	* testsuite/gas/i386/notrackbad.l: Likewise.
	* testsuite/gas/i386/x86-64-notrack-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-notrack.d: Likewise.
	* testsuite/gas/i386/x86-64-notrackbad.l: Likewise.

2017-09-07  Palmer Dabbelt  <palmer@dabbelt.com>

	* config/tc-riscv.c (riscv_frag_align_code): Emit the entire
	alignment sequence inside R_RISCV_ALIGN.

2017-09-05  Alexander Fedotov <alexander.fedotov@nxp.com>
	    Edmar Wienskoski <edmar.wienskoski@nxp.com

	* config/tc-ppc.c (md_parse_option): Handle "mno-vle" flag.
	(ppc_elf_section_letter): New function.
	* config/tc-ppc.h (md_elf_section_letter): New.
	* testsuite/gas/elf/section10.d: Adjust for VLE.

2017-09-01  Tamar Christina  <tamar.christina@arm.com>

	* config/tc-aarch64.c (aarch64_cpus): Enable DOTPROD for
	cortex-a55 and cortx-a75.

2017-08-30  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/branch-addend-micromips.d: New test.
	* testsuite/gas/mips/branch-addend-micromips-n32.d: New test.
	* testsuite/gas/mips/branch-addend-micromips-n64.d: New test.
	* testsuite/gas/mips/branch-addend-micromips.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-08-30  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (md_convert_frag): Respect
	`mips_ignore_branch_isa'.
	* testsuite/gas/mips/branch-local-5.d: New test.
	* testsuite/gas/mips/branch-local-n32-5.d: New test.
	* testsuite/gas/mips/branch-local-n64-5.d: New test.
	* testsuite/gas/mips/branch-local-6.d: New test.
	* testsuite/gas/mips/branch-local-n32-6.d: New test.
	* testsuite/gas/mips/branch-local-n64-6.d: New test.
	* testsuite/gas/mips/branch-local-7.d: New test.
	* testsuite/gas/mips/branch-local-n32-7.d: New test.
	* testsuite/gas/mips/branch-local-n64-7.d: New test.
	* testsuite/gas/mips/branch-local-ignore-5.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n32-5.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n64-5.d: New test.
	* testsuite/gas/mips/branch-local-ignore-6.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n32-6.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n64-6.d: New test.
	* testsuite/gas/mips/branch-local-5.l: New stderr output.
	* testsuite/gas/mips/branch-local-6.l: New stderr output.
	* testsuite/gas/mips/branch-local-5.s: New test source.
	* testsuite/gas/mips/branch-local-6.s: New test source.
	* testsuite/gas/mips/branch-local-7.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-08-30  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/branch-local-n32-2.d: Use `branch-local-2.l'
	for `error-output'.
	* testsuite/gas/mips/branch-local-n64-2.d: Likewise.
	* testsuite/gas/mips/branch-local-n32-3.d: Use `branch-local-3.l'
	for `error-output'.
	* testsuite/gas/mips/branch-local-n64-3.d: Likewise.
	* testsuite/gas/mips/branch-local-n32-2.l: Remove file.
	* testsuite/gas/mips/branch-local-n64-2.l: Remove file.
	* testsuite/gas/mips/branch-local-n32-3.l: Remove file.
	* testsuite/gas/mips/branch-local-n64-3.l: Remove file.

2017-08-29  Jozef Lawrynowicz  <jozef.l@somniumtech.com>

	* config/tc-msp430.c (md_parse_option): Define high data and high
	bss symbols if -mdata-region is passed.
	Define -mdata-region open.
	* doc/c-msp430.texi: Document -mdata-region.
	* testsuite/gas/msp430/high-data-bss-sym.d: New test.
	* testsuite/gas/msp430/high-data-bss-sym.s: New.
	* testsuite/gas/msp430/msp430.exp: Add -mdata-region tests.

2017-08-23  Alexander Fedotov <alexander.fedotov@nxp.com>
	    Edmar Wienskoski <edmar.wienskoski@nxp.com

	* config/tc-ppc.c:
	(md_parse_option): Add mspe2 switch.
	(md_show_usage): Document -mspe2.
	(ppc_setup_opcodes): Handle spe2_opcodes.
	* doc/as.texinfo: Document -mspe2.
	* doc/c-ppc.texi: Likewise.
	* testsuite/gas/ppc/efs.d: New file.
	* testsuite/gas/ppc/efs.s: Likewise.
	* testsuite/gas/ppc/efs2.d: Likewise.
	* testsuite/gas/ppc/efs2.s: Likewise.
	* testsuite/gas/ppc/ppc.exp: Run new tests.
	* testsuite/gas/ppc/spe.d: New file.
	* testsuite/gas/ppc/spe.s: Likewise.
	* testsuite/gas/ppc/spe2-checks.d: Likewise.
	* testsuite/gas/ppc/spe2-checks.l: Likewise.
	* testsuite/gas/ppc/spe2-checks.s: Likewise.
	* testsuite/gas/ppc/spe2.d: Likewise.
	* testsuite/gas/ppc/spe2.s: Likewise.
	* testsuite/gas/ppc/spe_ambiguous.d: Likewise.
	* testsuite/gas/ppc/spe_ambiguous.s: Likewise.

2017-08-23  James Clarke  <jrtc27@jrtc27.com>

	* config/tc-sparc.c (tc_gen_reloc): Convert BFD_RELOC_8/16/32/64
	into the corresponding BFD_RELOC_8/16/32/64_PCREL relocation
	when requested.
	* config/tc-sparc.h (DIFF_EXPR_OK): Define to enable PC-relative
	diff relocations.
	(TC_FORCE_RELOCATION_SUB_LOCAL): Define to ensure only supported
	relocations are made PC-relative.
	(CFI_DIFF_EXPR_OK): Define to 0 to force BFD_RELOC_32_PCREL to
	be used directly, since otherwise BFD_RELOC_SPARC_UA32 will be
	used for .eh_frame which cannot in general be converted to a
	BFD_RELOC_32_PCREL due to alignment requirements.

2017-08-22  Alan Modra  <amodra@gmail.com>

	* testsuite/gas/ppc/lsp-checks.d: Assemble with -a32.
	* testsuite/gas/ppc/lsp.d: Likewise.

2017-08-21  Alexander Fedotov <alexander.fedotov@nxp.com>
	    Edmar Wienskoski <edmar.wienskoski@nxp.com

	* testsuite/gas/ppc/lsp-checks.d,
	* testsuite/gas/ppc/lsp-checks.l,
	* testsuite/gas/ppc/lsp-checks.s: New test.
	* testsuite/gas/ppc/lsp.d,
	* testsuite/gas/ppc/lsp.s: New test.
	* testsuite/gas/ppc/ppc.exp: Run new tests.

2017-08-15  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config/tc-aarch64.c (REGDEF_ALIAS): Define
	(reg_names): Update for ip0, ip1, fp, lr to use REGDEF_ALIAS
	* doc/c-aarch64.texi: Update documentation on .req.
	* testsuite/gas/diagnostic.s: Update
	* testsuite/gas/diagnostic.l: Likewise
	* testsuite/gas/register_aliases.s: New file.
	* testsuite/gas/register_aliases.d: New file.

2017-08-11  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/21667
	* read.c (pseudo_set): Update error message for alias of common
	symbol.
	* write.c (write_object_file): Disallow both local and global
	aliases of common symbol.
	* testsuite/gas/elf/common5a.d: New file.
	* testsuite/gas/elf/common5a.l: Likewise.
	* testsuite/gas/elf/common5a.s: Likewise.
	* testsuite/gas/elf/common5b.d: Likewise.
	* testsuite/gas/elf/common5b.l: Likewise.
	* testsuite/gas/elf/common5b.s: Likewise.
	* testsuite/gas/elf/common5c.d: Likewise.
	* testsuite/gas/elf/common5c.s: Likewise.
	* testsuite/gas/elf/common5d.d: Likewise.
	* testsuite/gas/elf/common5d.s: Likewise.
	* testsuite/gas/elf/elf.exp: Run common5a, common5b, common5c
	and common5d.

2017-08-10  Nick Clifton  <nickc@redhat.com>

	PR gas/21939
	* config/obj-macho.c (obj_mach_o_set_indirect_symbols): Increase
	size of indirect_syms array so that it is large enough to hold
	every symbol if necessary.

2017-08-09  Jiong Wang  <jiong.wang@arm.com>

	* config/tc-arm.c (do_crc32_1): Remove warning on REG_SP for thumb_mode.
	* testsuite/gas/arm/crc32-armv8-a-bad.d: Update exepcted result.
	* testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise.
	* testsuite/gas/arm/crc32-armv8-a.d: Likewise.
	* testsuite/gas/arm/crc32-armv8-r.d: Likewise.
	* testsuite/gas/arm/crc32-armv8-ar-bad.s: Update test case.
	* testsuite/gas/arm/crc32-armv8-ar.s: Likewise.
	* testsuite/gas/arm/crc32-bad.l: Update expected error message.

2017-08-02  Nick Clifton  <nickc@redhat.com>

	* testsuite/gas/all/gas.exp: Add am33 to the skip lists of tests
	passed over by the mn10300 target.
	* testsuite/gas/elf/elf.exp: Likewise.
	* testsuite/gas/elf/dwarf2-11.d: Correct skip of am33 target.
	* testsuite/gas/elf/dwarf2-12.d: Likewise.
	* testsuite/gas/elf/dwarf2-13.d: Likewise.
	* testsuite/gas/elf/dwarf2-14.d: Likewise.
	* testsuite/gas/elf/dwarf2-15.d: Likewise.
	* testsuite/gas/elf/dwarf2-16.d: Likewise.
	* testsuite/gas/elf/dwarf2-17.d: Likewise.
	* testsuite/gas/elf/dwarf2-18.d: Likewise.
	* testsuite/gas/elf/dwarf2-5.d: Likewise.
	* testsuite/gas/elf/dwarf2-6.d: Likewise.
	* testsuite/gas/elf/dwarf2-7.d: Likewise.

2017-08-01  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/21874
	* config/tc-i386-intel.c (i386_intel_operand): Update segment
	register check.
	* testsuite/gas/i386/intelok.s: Replace "fs:gs:[eax]" with
	"fs:[eax]".
	* testsuite/gas/i386/inval-seg.s: Add tests for invalid segment
	register.
	* testsuite/gas/i386/x86-64-inval-seg.s: Likewise.
	* testsuite/gas/i386/inval-seg.l: Updated.
	* testsuite/gas/i386/x86-64-inval-seg.l: Likewise.

2017-07-31  John David Anglin  <danglin@gcc.gnu.org>

	* config/tc-hppa.c (pa_ip): Clear `d' bit in branch on bit instructions
	with a double-word condition and a fixed bit position greater than 31.

2017-07-28  Andrew Waterman  <andrew@sifive.com>

	* config/tc-riscv.c (riscv_set_arch): Handle the Q subset like
	all other subsets.
	Obviate use-after-free.

2017-07-25  Nick Clifton  <nickc@redhat.com>

	PR 21739
	* testsuite/gas/arc/add_s-err.s: Update expected error message.

2017-07-24  Nick Clifton  <nickc@redhat.com>

	PR 21809
	* config/tc-aarch64.c (aarch64_init_frag): Do not set a mapping
	state for frags in debug sections.
	* config/tc-arm.c (arm_init_frag): Likewise.

2017-07-24  Hans-Peter Nilsson  <hp@bitrange.com>

	* dwarf2dbg.c (dwarf2dbg_final_check): Rename local variable exp
	from expr.

2017-07-21  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/tc-s390.c (s390_parse_cpu): Add z14 as alternate CPU
	name.
	* doc/as.texinfo: Add z14 to CPU string list.
	* doc/c-s390.texi: Likewise.

2017-07-21  Alexandre Oliva  <aoliva@redhat.com>

	* dwarf2dbg.c (unused): Check offset of next in struct line_entry.
	(current): Initialize view.
	(force_reset_view, view_assert_failed): New variables.
	(reverse_line_entry_list): New function.
	(set_or_check_view): Likewise.
	(dwarf2_gen_line_info_1): Call it.
	(dwarf2_where): Set view to NULL.
	(dwarf2_emit_insn): Return early when called before first file.
	(dwarf2_directive_loc): Add view support.  Emit insn
	immediately when view option is given.
	(process_entries): Avoid set_address to reset view when a known
	address change already implies the view reset.
	(dwarf2dbg_final_check): New function.
	* dwarf2dbg.h (struct dwarf2_line_info): Add view.
	(dwarf2dbg_final_check): Declare.
	* read.c (s_leb128): Parse expression as deferred.
	* write.c (write_object_file): Check pending view asserts.
	(cvt_frag_to_fill): Complain about undefined leb128 operand.
	* doc/as.texinfo (.loc): Document view support.
	* NEWS: Mention the new feature.
	* testsuite/gas/all/gas.exp: Run sleb128-9.
	* testsuite/gas/all/sleb128-9.d: New.
	* testsuite/gas/all/sleb128-9.l: New.
	* testsuite/gas/all/sleb128-9.s: New.
	* testsuite/gas/elf/dwarf2-1.d: Add nonzero views.
	* testsuite/gas/elf/dwarf2-2.d: Likewise.
	* testsuite/gas/elf/dwarf2-5.d: New.
	* testsuite/gas/elf/dwarf2-5.s: New.
	* testsuite/gas/elf/dwarf2-6.d: New.
	* testsuite/gas/elf/dwarf2-6.s: New.
	* testsuite/gas/elf/dwarf2-7.d: New.
	* testsuite/gas/elf/dwarf2-7.s: New.
	* testsuite/gas/elf/dwarf2-8.d: New.
	* testsuite/gas/elf/dwarf2-8.l: New.
	* testsuite/gas/elf/dwarf2-8.s: New.
	* testsuite/gas/elf/dwarf2-9.d: New.
	* testsuite/gas/elf/dwarf2-9.l: New.
	* testsuite/gas/elf/dwarf2-9.s: New.
	* testsuite/gas/elf/dwarf2-10.d: New.
	* testsuite/gas/elf/dwarf2-10.l: New.
	* testsuite/gas/elf/dwarf2-10.s: New.
	* testsuite/gas/elf/dwarf2-11.d: New.
	* testsuite/gas/elf/dwarf2-11.s: New.
	* testsuite/gas/elf/dwarf2-12.d: New.
	* testsuite/gas/elf/dwarf2-12.s: New.
	* testsuite/gas/elf/dwarf2-13.d: New.
	* testsuite/gas/elf/dwarf2-13.s: New.
	* testsuite/gas/elf/dwarf2-14.d: New.
	* testsuite/gas/elf/dwarf2-14.s: New.
	* testsuite/gas/elf/dwarf2-15.d: New.
	* testsuite/gas/elf/dwarf2-15.s: New.
	* testsuite/gas/elf/dwarf2-16.d: New.
	* testsuite/gas/elf/dwarf2-16.s: New.
	* testsuite/gas/elf/dwarf2-17.d: New.
	* testsuite/gas/elf/dwarf2-17.s: New.
	* testsuite/gas/elf/dwarf2-18.d: New.
	* testsuite/gas/elf/dwarf2-18.s: New.
	* testsuite/gas/elf/elf.exp: Run dwarf2-5..18 tests.
	* testsuite/gas/i386/dw2-compress-1.d: Add nonzero views.
	* testsuite/gas/i386/dw2-compressed-1.d: Likewise.
	* testsuite/gas/i386/ilp32/lns/lns-duplicate.d: Likewise.
	* testsuite/gas/lns/lns-big-delta.d: Likewise.
	* testsuite/gas/lns/lns-duplicate.d: Likewise.
	* testsuite/gas/mips/loc-swap-2.d: Likewise.
	* testsuite/gas/mips/loc-swap-3.d: Likewise.
	* testsuite/gas/mips/loc-swap.d: Likewise.
	* testsuite/gas/mips/micromips@loc-swap-2.d: Likewise.
	* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
	* testsuite/gas/mips/mips16@loc-swap-2.d: Likewise.
	* testsuite/gas/mips/mips16@loc-swap.d: Likewise.
	* testsuite/gas/mips/mips16e@loc-swap.d: Likewise.

2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/gas/arc/jli-1.d: New file.
	* testsuite/gas/arc/jli-1.s: Likewise.
	* testsuite/gas/arc/taux.d: Update for jli_base.

2017-07-19  Tristan Gingold  <gingold@adacore.com>

	* as.c (start_sbrk): Remove.
	(main): Remove assignment.
	(dump_statistics): Remove display of data size.

2017-07-19  Tristan Gingold  <gingold@adacore.com>

	* testsuite/gas/pe/seh-x64-err-2.s: New test.
	* testsuite/gas/pe/seh-x64-err-2.l: New stderr output.
	* testsuite/gas/pe/pe.exp: Add test.
	* config/obj-coff-seh.c (obj_coff_seh_do_final): Don't try to end
	seh part.

2017-07-18  Nick Clifton  <nickc@redhat.com>

	PR 21775
	* config/tc-arm.c: Fix spelling typos.
	* config/tc-mips.c: Likewise.
	* config/tc-msp430.c: Likewise.
	* config/tc-sh64.c: Likewise.
	* config/tc-tic4x.c: Likewise.
	* ecoff.c: Likewise.
	* testsuite/gas/arm/ldr-bad.l: Likewise.
	* testsuite/gas/arm/ldr-t-bad.l: Likewise.
	* testsuite/gas/tic54x/opcodes.s: Likewise.
	* testsuite/gas/msp340/errata_warns.l: Likewise.

2017-07-18  Nick Clifton  <nickc@redhat.com>

	* po/uk.po: Updated Ukranian translation.

2017-07-17  Georg-Johann Lay  <avr@gjlay.de>

	PR 21472
	* config/tc-avr.c (mcu_types): Add entries for: attiny212,
	attiny214, attiny412, attiny414, attiny814, attiny1614,
	attiny1616, attiny1617, attiny3214, attiny3216, attiny3217.
	(md_show_usage): Adjust doc for "avrxmega3".
	* doc/c-avr.texi (AVR options) [-mmcu=]: Adjust doc for avrxmega3.
	Add MCUs: attiny212, attiny214, attiny412, attiny414, attiny416,
	attiny417, attiny814, attiny816, attiny817, attiny1614,
	attiny1616, attiny1617, attiny3214, attiny3216, attiny3217.

2017-07-13  Jim Wilson  <jim.wilson@linaro.org>

	* config/tc-arch64.c (aarch64_cpus): Add AARCH64_FEATURE_RDMA to
	falkor and qdf24xx entries.

2017-07-12  Alan Modra  <amodra@gmail.com>

	* po/es.po: Update from translationproject.org/latest/gas/.
	* po/fi.po: Likewise.
	* po/fr.po: Likewise.
	* po/id.po: Likewise.
	* po/ja.po: Likewise.
	* po/ru.po: Likewise.
	* po/sv.po: Likewise.
	* po/tr.po: Likewise.
	* po/uk.po: Likewise.
	* po/zh_CN.po: Likewise.

2017-07-12  Nick Clifton  <nickc@redhat.com>

	Fix compile time warnings using gcc 7.1.1.
	* config/tc-pru.c (md_assemble): Add continue statement after
	handling 'E' operand character.
	* config/tc-v850.c (md_assemble): Initialise the 'insn' variable.

2017-07-05  James Greenhalgh  <james.greenhalgh@arm.com>

	* config/tc-arm.c (arm_cpus): Add Cortex-A55 and Cortex-A75.
	* doc/c-arm.texi (-mcpu): Document Cortex-A55 and Cortex-A75.

2017-07-05  Borislav Petkov  <bp@suse.de>

	* testsuite/gas/i386/opcode.s: Add tests for ModRM.reg == 6 variants.
	* testsuite/gas/i386/opcode.d: ditto.
	* testsuite/gas/i386/x86-64-opcode.s: Add x86_64 variants too.
	* testsuite/gas/i386/x86-64-opcode.d: ditto.

2017-07-04  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * config/tc-arm.c (arm_regs): Add MVFR2.
        (do_vmrs): Constraint for MVFR2 and armv8.
        (do_vmsr): Likewise.
        * testsuite/gas/arm/armv8-a+fp.d: Update.
        * testsuite/gas/arm/armv8-ar+fp.s: Likewise.
        * testsuite/gas/arm/armv8-r+fp.d: Likewise.
        * testsuite/gas/arm/vfp-bad.s: Likewise.
        * testsuite/gas/arm/vfp-bad.l: Likewise.

2017-07-04  Tristan Gingold  <gingold@adacore.com>

	* configure: Regenerate.

2017-07-04  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.29.

2017-07-03  Alan Modra  <amodra@gmail.com>

	* testsuite/gas/elf/symver.d: Don't run on hppa64-hpux.

2017-06-30  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (md_convert_frag): Use a switch on the
	microMIPS relaxation type rather than a chain of conditionals.

2017-06-30  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (md_convert_frag): Rewrite `fix_new_exp'
	calls in terms of `fix_new'.

2017-06-30  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (md_convert_frag): Don't make a helper
	expression symbol for `fix_new_exp' called with a non-zero
	offset.
	* testsuite/gas/mips/relax-offset.d: New test.
	* testsuite/gas/mips/mips1@relax-offset.d: New test.
	* testsuite/gas/mips/r3000@relax-offset.d: New test.
	* testsuite/gas/mips/r3900@relax-offset.d: New test.
	* testsuite/gas/mips/micromips@relax-offset.d: New test.
	* testsuite/gas/mips/relax-offset.l: New stderr output.
	* testsuite/gas/mips/relax-offset.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-06-30  Georg-Johann Lay  <avr@gjlay.de>

	PR gas/21683
	* doc/c-avr.texi (AVR Options) <-mgcc-isr>: Document it.
	(AVR Pseudo Instructions): New node.
	* config/tc-avr.h (md_pre_output_hook): Define to avr_pre_output_hook.
	(md_undefined_symbol): Define to avr_undefined_symbol.
	(avr_pre_output_hook, avr_undefined_symbol): New protos.
	* config/tc-avr.c (struc-symbol.h): Include it.
	(ISR_CHUNK_Done, ISR_CHUNK_Prologue, ISR_CHUNK_Epilogue): New enums.
	(avr_isr, avr_gccisr_opcode)
	(avr_no_sreg_hash, avr_no_sreg): New static variables.
	(avr_opt_s) <have_gccisr>: Add field.
	(avr_opt): Add initializer for have_gccisr.
	(enum options) <OPTION_HAVE_GCCISR>: Add enum.
	(md_longopts) <"mgcc-isr">: Add entry.
	(md_show_usage): Document -mgcc-isr.
	(md_parse_option) [OPTION_HAVE_GCCISR]: Handle it.
	(md_undefined_symbol): Remove.
	(avr_undefined_symbol, avr_pre_output_hook): New fuctions.
	(md_begin) <avr_no_sreg_hash, avr_gccisr_opcode>: Initialize them.
	(avr_operand) <pregno>: Add argument and set *pregno if function
	is called for a register constraint.
	[N]: Handle constraint.
	(avr_operands) <avr_operand>: Pass 5th parameter to calls.
	[avr_opt.have_gccisr]: Call avr_update_gccisr.  Call
	avr_gccisr_operands instead of avr_operands.
	(avr_update_gccisr, avr_emit_insn, avr_patch_gccisr_frag)
	(avr_gccisr_operands, avr_check_gccisr_done): New static functions.
	* testsuite/gas/avr/gccisr-01.d: New test.
	* testsuite/gas/avr/gccisr-01.s: New test.
	* testsuite/gas/avr/gccisr-02.d: New test.
	* testsuite/gas/avr/gccisr-02.s: New test.
	* testsuite/gas/avr/gccisr-03.d: New test.
	* testsuite/gas/avr/gccisr-03.s: New test.

2017-06-30  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (match_float_constant): Update description.
	(match_operand): Likewise.

2017-06-30  Andrew Bennett  <andrew.bennett@imgtec.com>
	    Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (mips_ases): Add microMIPS XPA support.
	* testsuite/gas/mips/micromips@xpa.d: New test.
	* testsuite/gas/mips/mips.exp: Run the new test.  Enable
	`xpa-virt-err' test for `micromips'.

2017-06-30  Andrew Bennett  <andrew.bennett@imgtec.com>
	    Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/micromips@r5.d: New test.
	* testsuite/gas/mips/mips.exp: Run the new test.

2017-06-30  Maciej W. Rozycki  <macro@imgtec.com>
	    Andrew Bennett  <andrew.bennett@imgtec.com>

	* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
	* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
	flags.  Add `-mvirt' to `as' flags.
	* testsuite/gas/mips/xpa-err.d: New test.
	* testsuite/gas/mips/xpa-virt-err.d: New test.
	* testsuite/gas/mips/xpa-err.l: New stderr output.
	* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
	* testsuite/gas/mips/xpa-err.s: New test source.
	* testsuite/gas/mips/xpa-virt-err.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-06-29  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: Adjust for the
	ASE_MIPS16E2_MT flag disassembler fix.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e2-mt-sub.d:
	Likewise.

2017-06-29  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (mips_set_ase): Clear the ASE_MIPS16E2_MT
	flag before recalculating.
	* testsuite/gas/mips/mips16e2-mt-err.d: New test.
	* testsuite/gas/mips/mips16e2-mt-err.l: New stderr output.
	* testsuite/gas/mips/mips16e2-mt-err.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new test.

2017-06-28  Tamar Christina  <tamar.christina@arm.com>

	* config/tc-aarch64.c (aarch64_reg_parse_32_64): Accept 4B.
	(aarch64_features): Added dotprod.
	* doc/c-aarch64.texi: Added dotprod.
	* testsuite/gas/aarch64/dotproduct.d: New.
	* testsuite/gas/aarch64/dotproduct.s: New.

2017-06-28  Jiong Wang  <jiong.wang@arm.com>

	* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
	(neon_scalar_for_mul): Improve comments.
	(do_neon_dotproduct): New function to encode Dot Product instructions.
	(do_neon_dotproduct_s): Wrapper function for signed Dot Product
	instructions.
	(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
	instructions.
	(insns): New entries for vsdot and vudot.
	(arm_extensions): New entry for "dotprod".
	* doc/c-arm.texi: Document new "dotprod" extension.
	* testsuite/gas/arm/dotprod.s: New test source.
	* testsuite/gas/arm/dotprod-illegal.s: New test source.
	* testsuite/gas/arm/dotprod.d: New test.
	* testsuite/gas/arm/dotprod-thumb2.d: New test.
	* testsuite/gas/arm/dotprod-illegal.d: New test.
	* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
	* testsuite/gas/arm/dotprod-illegal.l: New error file.
	* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.

2017-06-28  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/elf_mach_interaptiv-mr2.d: New test.
	* testsuite/gas/mips/save-err.d: New test.
	* testsuite/gas/mips/save-sub.d: New test.
	* testsuite/gas/mips/interaptiv-mr2@save.d: New test.
	* testsuite/gas/mips/mips1@save-sub.d: New test.
	* testsuite/gas/mips/mips2@save-sub.d: New test.
	* testsuite/gas/mips/mips3@save-sub.d: New test.
	* testsuite/gas/mips/mips4@save-sub.d: New test.
	* testsuite/gas/mips/mips5@save-sub.d: New test.
	* testsuite/gas/mips/mips32@save-sub.d: New test.
	* testsuite/gas/mips/mips64@save-sub.d: New test.
	* testsuite/gas/mips/mips16@save-sub.d: New test.
	* testsuite/gas/mips/mips16e@save-sub.d: New test.
	* testsuite/gas/mips/r3000@save-sub.d: New test.
	* testsuite/gas/mips/r3900@save-sub.d: New test.
	* testsuite/gas/mips/r4000@save-sub.d: New test.
	* testsuite/gas/mips/vr5400@save-sub.d: New test.
	* testsuite/gas/mips/interaptiv-mr2@save-sub.d: New test.
	* testsuite/gas/mips/sb1@save-sub.d: New test.
	* testsuite/gas/mips/octeon2@save-sub.d: New test.
	* testsuite/gas/mips/octeon3@save-sub.d: New test.
	* testsuite/gas/mips/xlr@save-sub.d: New test.
	* testsuite/gas/mips/r5900@save-sub.d: New test.
	* testsuite/gas/mips/mips16e2-copy.d: New test.
	* testsuite/gas/mips/mips16e2-copy-err.d: New test.
	* testsuite/gas/mips/save.d: Remove `MIPS16e' from the `name'
	option.  Adjust for trailing padding change.
	* testsuite/gas/mips/mips16e2-copy-err.l: New stderr output.
	* testsuite/gas/mips/save-sub.s: New test source.
	* testsuite/gas/mips/mips16e2-copy.s: New test source.
	* testsuite/gas/mips/mips16e2-copy-err.s: New test source.
	* testsuite/gas/mips/save.s: Update description, change trailing
	padding and remove trailing white space.
	* testsuite/gas/mips/mips.exp: Expand `save' and `save-err'
	tests across the regular MIPS interAptiv MR2 architecture.  Run
	the new tests.

2017-06-28  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips.exp (interaptiv-mr2): New architecture.
	(mips16e2-interaptiv-mr2): Likewise.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro.d: New
	test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-t.d:
	New test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-e.d:
	New test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-t.d:
	New test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-e.d:
	New test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-64.d: New
	test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-sub.d: New
	test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-sub.d: New
	test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-64-sub.d:
	New test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e2-mt-sub.d:
	New test.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-asmacro.d:
	New test.
	* testsuite/gas/mips/interaptiv-mr2@mcu.d: New test.
	* testsuite/gas/mips/interaptiv-mr2@isa-override-1.d: New test.
	* testsuite/gas/mips/interaptiv-mr2@isa-override-2.d: New test.
	* testsuite/gas/mips/attr-gnu-4-5.d: Ignore any number of ASE
	flag lines present rather than just one.
	* testsuite/gas/mips/attr-gnu-4-6.d: Likewise.
	* testsuite/gas/mips/attr-gnu-4-7.d: Likewise.
	* testsuite/gas/mips/attr-none-o32-fp64-nooddspreg.d: Likewise.
	* testsuite/gas/mips/attr-none-o32-fp64.d: Likewise.
	* testsuite/gas/mips/attr-none-o32-fpxx.d: Likewise.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro.l: New
	stderr output.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-t.l:
	New stderr output.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-e.l:
	New stderr output.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-t.l:
	New stderr output.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-e.l:
	New stderr output.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-sub.l: New
	stderr output.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-sub.l: New
	stderr output.
	* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-64-sub.l:
	New stderr output.
	* testsuite/gas/mips/interaptiv-mr2@isa-override-1.l: New stderr
	output.
	* testsuite/gas/mips/interaptiv-mr2@isa-override-2.l: New stderr
	output.

2017-06-28  Maciej W. Rozycki  <macro@imgtec.com>
	    Matthew Fortune  <matthew.fortune@imgtec.com>

	* config/tc-mips.c (validate_mips_insn): Handle
	OP_SAVE_RESTORE_LIST specially.
	(mips_encode_save_restore, mips16_encode_save_restore): New
	functions.
	(match_save_restore_list_operand): Factor out SAVE/RESTORE
	operand insertion into the instruction word or halfword to these
	new functions.
	(mips_cpu_info_table): Add "interaptiv-mr2" entry.

	* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
	`-march=' argument list.

2017-06-27  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16e-save.d: Rename to...
	* testsuite/gas/mips/save.d: ... this.
	* testsuite/gas/mips/mips16e-save-err.d: Update the
	`error-output' option and rename to...
	* testsuite/gas/mips/save-err.d: ... this.
	* testsuite/gas/mips/mips16e-save-err.l: Rename to...
	* testsuite/gas/mips/save-err.l: ... this.
	* testsuite/gas/mips/mips16e-save.s: Rename to...
	* testsuite/gas/mips/save.s: ... this.
	* testsuite/gas/mips/mips16e-save-err.s: Rename to...
	* testsuite/gas/mips/save-err.s: ... this.
	* testsuite/gas/mips/mips.exp: Rename `mips16e-save' and
	`mips16e-save-err' invocations to `save' and `save-err'
	respectively and reorder these tests away from MIPS16 tests.

2017-06-27  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16e-save.d: Remove `-mmips:isa32
	-mmips:16' from `objdump' flags and `-march=mips32 -mips16' from
	`as' flags.
	* testsuite/gas/mips/mips16e-save-err.d: Remove `-march=mips32'
	from `as' flags.
	* testsuite/gas/mips/mips16e-save.s: Remove the `.set mips16'
	pseudo-op.
	* testsuite/gas/mips/mips16e-save-err.s: Likewise.
	* testsuite/gas/mips/mips.exp: Run SAVE/RESTORE tests across all
	MIPS16e architectures.

2017-06-27  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16e-save-err.d: New test.
	* gas/testsuite/gas/mips/mips.exp: Fold `mips16e-save-err' list
	test into the new test.

2017-06-27  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16e-save.d: Capitalize the `name'
	option.

2017-06-26  Kuan-Lin Chen  <rufus@andestech.com>

	* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
	R_RISCV_32_PCREL relocation.

2017-06-26  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/21661
	* config/obj-elf.c (obj_elf_symver): Don't allow .symver with
	common symbol.
	(elf_frob_symbol): Likewise.
	* testsuite/gas/elf/elf.exp: Run pr21661.
	* testsuite/gas/elf/pr21661.d: New file.
	* testsuite/gas/elf/pr21661.s: Likewise.

2017-06-26  Nick Clifton  <nickc@redhat.com>

	* config/tc-arm.c (fpu_any): Only define for ELF based targets.

2017-06-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* /config/tc-arc.c (is_br_jmp_insn_p): Update macro with known
	instructions to be accounted as jumps.
	(assemble_insn): Check for limms into the delay slots.  Emit an
	error if so.
	* testsuite/gas/arc/asm-errors-3.d: New file.
	* testsuite/gas/arc/asm-errors-3.err: Likewise.
	* testsuite/gas/arc/asm-errors-3.s: Likewise.

2017-06-26  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* NEWS: Mention support of ARM Cortex-R52 processor.
	* config/tc-arm.c (arm_cpus): Add entry for ARM Cortex-R52 processor.
	* doc/c-arm.texi: Mention support for -mcpu=cortex-r52.

2017-06-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* NEWS: Mention support for ARMv8-R architecture.
	* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
	(arm_extensions): Restrict pan, ras and rdma extension to
	ARMv8-A and make crypto, fp and simd extensions available to
	ARMv8-R.
	(cpu_arch_ver): Add entry for ARMv8-R.
	(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
	logic.
	* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
	* testsuite/gas/arm/armv8-ar+fp.s: This.  Remove .arch directive.
	* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
	architecture to assemble for.
	* testsuite/gas/arm/armv8-r+fp.d: New.
	* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
	* testsuite/gas/arm/armv8-ar+simd.s: This.  Remove .arch directive.
	* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
	architecture to assemble for.
	* testsuite/gas/arm/armv8-r+simd.d: New.
	* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
	* testsuite/gas/arm/armv8-ar-bad.s: This.  Remove .arch directive.
	* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
	* testsuite/gas/arm/armv8-ar-bad.l: This.  Decrement line number by 1.
	* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
	architecture to assemble for and adjust error output file.
	* testsuite/gas/arm/armv8-r-bad.d: New.
	* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
	* testsuite/gas/arm/armv8-ar-barrier.s: This.
	* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
	* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
	* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
	* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
	* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
	* testsuite/gas/arm/armv8-ar-it-bad.s: This.  Remove .arch directive.
	* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
	* testsuite/gas/arm/armv8-ar-it-bad.l: This.  Decrement line number
	by 1.
	* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
	architecture to assemble for and adjust error output file.
	* testsuite/gas/arm/armv8-r-it-bad.d: New.
	* testsuite/gas/arm/armv8-a.s: Rename into ...
	* testsuite/gas/arm/armv8-ar.s: This.  Remove .arch directive.
	* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
	architecture to assemble for.
	* testsuite/gas/arm/armv8-r.d: New.
	* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
	* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
	* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
	* testsuite/gas/arm/attr-march-armv8-r.d: New.
	* testsuite/gas/arm/crc32.s: Rename into ...
	* testsuite/gas/arm/crc32-armv8-ar.s: This.
	* testsuite/gas/arm/crc32.d: Rename into ...
	* testsuite/gas/arm/crc32-armv8-a.d: This.  Specify source to assemble.
	* testsuite/gas/arm/crc32-armv8-r.d: New.
	* testsuite/gas/arm/crc32-bad.s: Rename into ...
	* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
	* testsuite/gas/arm/crc32-bad.d: Rename into ...
	* testsuite/gas/arm/crc32-armv8-a-bad.d: This.  Specify source to
	assemble.
	* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
	* testsuite/gas/arm/mask_1.s: Rename into ...
	* testsuite/gas/arm/mask_1-armv8-ar.s: This.
	* testsuite/gas/arm/mask_1.d: Rename into ...
	* testsuite/gas/arm/mask_1-armv8-a.d: This.  Specify source to
	assemble.
	* testsuite/gas/arm/mask_1-armv8-r.d: new.

2017-06-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (arm_ext_v6m): Delete.
	(arm_ext_v7m): Delete.
	(arm_ext_m): Remove ARM_EXT_OS from the set of feature defined M
	profile.
	(arm_arch_v6m_only): Delete.
	(do_t_swi): Remove special case for ARMv6S-M.
	(md_assemble): Display error message previously in do_t_swi when
	SVC is not available.
	(insns): Guard swi and svc by arm_ext_os for Thumb mode.
	(aeabi_set_public_attributes): Remove special case for ARMv6S-M.

2017-05-11  Andrew Waterman  <andrew@sifive.com>

	* config/tc-riscv.c (riscv_ip): Changes as_warn to as_bad for improper
	shift amounts.

2017-06-22  Nick Clifton  <nickc@redhat.com>

	* config/tc-arm.c (arm_ext_v7m): Add ATTRIBUTE_UNUSED.

2017-06-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (fpu_any): Defined from FPU_ANY.
	(cpu_arch_ver): Add all architectures and sort by release date.
	(have_ext_for_needed_feat_p): New.
	(get_aeabi_cpu_arch_from_fset): New.
	(aeabi_set_public_attributes): Call above function to determine
	Tag_CPU_arch and Tag_CPU_arch_profile values.  Adapt Tag_ARM_ISA_use
	and Tag_THUMB_ISA_use selection logic to check absence of feature bit
	accordingly.
	* testsuite/gas/arm/attr-march-armv1.d: Fix expected Tag_CPU_arch build
	attribute value.
	* testsuite/gas/arm/attr-march-armv2.d: Likewise.
	* testsuite/gas/arm/attr-march-armv2a.d: Likewise.
	* testsuite/gas/arm/attr-march-armv2s.d: Likewise.
	* testsuite/gas/arm/attr-march-armv3.d: Likewise.
	* testsuite/gas/arm/attr-march-armv3m.d: Likewise.
	* testsuite/gas/arm/pr12198-2.d: Likewise.

2017-06-21  H.J. Lu  <hongjiu.lu@intel.com>

	* testsuite/gas/i386/cet-intel.d: Updated.
	* testsuite/gas/i386/cet.d: Likewise.
	* testsuite/gas/i386/x86-64-cet-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-cet.d: Likewise.
	* testsuite/gas/i386/cet.s: Update incsspd and setssbsy tests.
	* testsuite/gas/i386/x86-64-cet.s: Likewise.

2017-06-21  H.J. Lu  <hongjiu.lu@intel.com>

	* testsuite/gas/i386/cet-intel.d: Updated.
	* testsuite/gas/i386/cet.d: Likewise.
	* testsuite/gas/i386/x86-64-cet-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-cet.d: Likewise.
	* testsuite/gas/i386/cet.s: Replace savessp with saveprevssp.
	* testsuite/gas/i386/x86-64-cet.s: Likewise.

2017-06-21  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_assemble): Update NOTRACK prefix check.
	* testsuite/gas/i386/notrack-intel.d: Updated.
	* testsuite/gas/i386/notrack.d: Likewise.
	* testsuite/gas/i386/notrackbad.l: Likewise.
	* testsuite/gas/i386/x86-64-notrack-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-notrack.d: Likewise.
	* testsuite/gas/i386/x86-64-notrackbad.l: Likewise.
	* testsuite/gas/i386/notrack.s: Add NOTRACK prefix tests with
	memory indirect branch.
	* testsuite/gas/i386/x86-64-notrack.s: Likewise.
	* testsuite/gas/i386/notrackbad.s: Remove memory indirect branch
	with NOTRACK prefix.
	* testsuite/gas/i386/x86-64-notrackbad.s: Likewise.

2017-06-20  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (arm_extensions): New duplicate idiv entry to enable
	Thumb division for ARMv7 architecture.
	(arm_parse_extension): Document expected behavior for duplicate
	entries.
	(s_arm_arch_extension): Likewise.
	* testsuite/gas/arm/forbid-armv7-idiv-ext.d: New test.
	* testsuite/gas/arm/forbid-armv7-idiv-ext.l: New expected output for
	above test.

2017-06-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (aeabi_set_public_attributes): Populate flags from
	feature bits used or selected_cpu depending on whether a CPU was
	selected by the user.

2017-06-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (aeabi_set_public_attributes): Test *mcpu_ext_opt to
	decide whether to set Tag_DSP_extension build attribute value.  Remove
	now useless arm_arch variable.

2017-06-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (dyn_mcpu_ext_opt): New static variable.
	(dyn_march_ext_opt): Likewise.
	(md_begin): Copy extension feature bits alongside architecture ones.
	Merge extensions feature bits in selected_cpu and cpu_variant if there
	is some.
	(arm_parse_extension): Pass architecture and extension feature bits in
	separate parameters, with architecture bits being read only.  Update
	**opt_p directly rather than *ext_set and initialize it if needed.
	(arm_parse_cpu): Stop merging architecture and extension feature bits
	and instead use mcpu_cpu_opt and dyn_mcpu_ext_opt to memorize them
	respectively.  Adapt to change in parameters of arm_parse_extension.
	(arm_parse_arch): Adapt to change in parameters of arm_parse_extension.
	(aeabi_set_attribute_string): Make function static.
	(arm_md_post_relax): New function.
	(s_arm_cpu): Stop merging architecture and extension feature bits and
	instead use mcpu_cpu_opt and dyn_mcpu_ext_opt to memorize them
	respectively.  Merge extension feature bits in cpu_variant
	if there is any.
	(s_arm_arch): Reset extension feature bit.  Set selected_cpu from
	*mcpu_cpu_opt and cpu_variant from selected_cpu and *mfpu_opt for
	consistency with s_arm_cpu.
	(s_arm_arch_extension): Update *dyn_mcpu_ext_opt rather than
	selected_cpu, allocating it before hand if needed.  Set selected_cpu
	from it and then cpu_variant.
	(s_arm_fpu): Merge *mcpu_ext_opt feature bits if any in cpu_variant.
	* config/tc-arm.h (md_post_relax_hook): Set to arm_md_post_relax.
	(aeabi_set_public_attributes): Delete external declaration.
	(arm_md_post_relax): Declare externally.

2017-06-21  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (struct arm_cpu_option_table): New ext field.
	(ARM_CPU_OPT): Add parameter to set new ext field and reorder canonical
	name field just after the name field.
	(arm_cpus): Move extension feature bit from value field to ext field,
	reorder parameter according to changes in ARM_CPU_OPT and reindent.
	(arm_parse_cpu): Point mcpu_cpu_opt to a bitfield merging the value and
	ext field from the selected arm_cpus entry.
	(s_arm_cpu): Likewise.

2017-06-21  James Greenhalgh  <james.greenhalgh@arm.com>

	* config/tc-aarch64.c (aarch64_cpus): Add cortex-a55 and cortex-a75.
	* doc/c-aarch64.texi (-mcpu): Document cortex-a55 and cortex-a75.

2017-06-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/21594
	* testsuite/gas/i386/mpx.s: Add 2 tests with invalid bnd
	register.
	* testsuite/gas/i386/x86-64-mpx.s: Likewise.
	* testsuite/gas/i386/mpx.d: Updated.
	* testsuite/gas/i386/x86-64-mpx.d: Likewise.

2017-06-14  Max Filippov  <jcmvbkbc@gmail.com>

	* config/tc-xtensa.c (density_supported, xtensa_fetch_width,
	absolute_literals_supported): Leave definitions uninitialized.
	(directive_state): Leave entries for directive_density and
	directive_absolute_literals initialized to false.
	(xg_init_global_config, xtensa_init): New functions.
	* config/tc-xtensa.h (TARGET_BYTES_BIG_ENDIAN): Define as 0.
	(HOST_SPECIAL_INIT): New definition.
	(xtensa_init): New declaration.

2017-06-07  Michael Collison  <michael.collison@arm.com>

	* config/tc-aarch64.c (reg_entry_reg_names): Add IP0,
	IP1, FP, and LR as register aliases of register 16, 17, 29
	and 30 respectively.
	* testsuite/gas/aarch64/diagnostic.l: Remove diagnostic
	prohibiting register 'lr' which is now an alias.
	* testsuite/gas/aarch64/diagnostic.s: Remove instruction
	utilizing register 'lr' which is now an alias.

2017-06-06  Jiong Wang  <jiong.wang@arm.com>

	* config/tc-arm.c (reject_bad_reg): Allow REG_SP on ARMv8-A.
	(parse_operands): Allow REG_SP for OP_oRRnpcsp and OP_RRnpcsp on
	ARMv8-A.
	(do_co_reg): Allow REG_SP for Rd on ARMv8-A.
	(do_t_add_sub): Likewise.
	(do_t_mov_cmp): Likewise.
	(do_t_tb): Likewise.
	* testsuite/gas/arm/ld-sp-warn.l: Delete the warning on REG_SP as Rt for
	ldrsb.
	* testsuite/gas/arm/sp-pc-validations-bad-t-v8a.d: New test.
	* testsuite/gas/arm/sp-pc-validations-bad-t-v8a.l: New test.
	* testsuite/gas/arm/sp-pc-validations-bad-t.d: Specifies -march=armv7-a.
	* testsuite/gas/arm/sp-pc-validations-bad-t.s: Remove ".arch armv7-a".
	* testsuite/gas/arm/sp-usage-thumb2-relax-on-v7.d: New test.
	* testsuite/gas/arm/sp-usage-thumb2-relax-on-v7.l: New test.
	* testsuite/gas/arm/sp-usage-thumb2-relax-on-v8.d: New test.
	* testsuite/gas/arm/sp-usage-thumb2-relax.s: New test.
	* testsuite/gas/arm/strex-bad-t.d: Specifies -march=armv7-a.

2017-06-05  Jim Wilson  <jim.wilson@linaro.org>

	* config/tc-arm.c (arm_cpus): Delete falkor and qdf24xx entries.
	* doc/c-arm.texi (-mcpu): Likewise.

2017-05-30  Anton Kolesov  <anton.kolesov@synopsys.com>

	* config/tc-arc.c (cpu_types): Include arc-cpu.def

2017-05-23  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/testsuite/gas/i386/notrackbad.l: Updated for non-ELF
	targets.
	* gas/testsuite/gas/i386/x86-64-notrackbad.l: Likewise.

2017-05-23  Claudiu Zissulescu <claziss@synopsys.com>

	* config/tc-arc.c (md_apply_fix): Use as_bad_where.
	(assemble_insn): Use as_bad.

2017-05-22  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (REX_PREFIX): Changed to 7.
	(NOTRACK_PREFIX): New.
	(MAX_PREFIXES): Changed to 8.
	(_i386_insn): Add notrack_prefix.
	(PREFIX_GROUP): Add PREFIX_DS.
	(add_prefix): Return PREFIX_DS for DS_PREFIX_OPCODE.
	(md_assemble): Check if NOTRACK prefix is supported.
	(parse_insn): Set notrack_prefix and issue an error for
	other prefixes after NOTRACK prefix.
	* testsuite/gas/i386/i386.exp: Run tests for NOTRACK prefix.
	* testsuite/gas/i386/notrack-intel.d: New file.
	* testsuite/gas/i386/notrack.d: Likewise.
	* testsuite/gas/i386/notrack.s: Likewise.
	* testsuite/gas/i386/notrackbad.l: Likewise.
	* testsuite/gas/i386/notrackbad.s: Likewise.
	* testsuite/gas/i386/x86-64-notrack-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-notrack.d: Likewise.
	* testsuite/gas/i386/x86-64-notrack.s: Likewise.
	* testsuite/gas/i386/x86-64-notrackbad.l: Likewise.
	* testsuite/gas/i386/x86-64-notrackbad.s: Likewise.

2017-05-22  Jiong Wang <jiong.wang@arm.com>

	* configure.tgt: Set "arch" to "aarch64" if ${cpu} equals "aarch64".
	Recognize the new triplet name aarch64*-linux-gnu_ilp32.
	* configure.ac: Output DEFAULT_ARCH macro for AArch64.
	* configure: Regenerate.
	* config/tc-aarch64.h (aarch64_after_parse_args): New declaration.
	(md_after_parse_args): New define.
	* config/tc-aarch64.c (aarch64_abi_type): New enumeration
	AARCH64_ABI_NONE.
	(DEFAULT_ARCH): New define.
	(aarch64_abi): Set default value to AARCH64_ABI_NONE.
	(aarch64_after_parse_args): New function.

2017-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/tc-sparc.c (sparc_arch_table): Entries for `sparc6',
	`v9m8' and `v8plusm8'.
	(sparc_md_end): Handle SPARC_OPCODE_ARCH_M8.
	(get_hwcap_name): Support the M8 hardware capabilities.
	(sparc_ip): Handle new operand types.
	* doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and
	-Asparc6, and the corresponding -xarch aliases.
	* testsuite/gas/sparc/sparc6.s: New file.
	* testsuite/gas/sparc/sparc6.d: Likewise.
	* testsuite/gas/sparc/sparc6-diag.s: Likewise.
	* testsuite/gas/sparc/sparc6-diag.l: Likewise.
	* testsuite/gas/sparc/fpcmpshl.s: Likewise.
	* testsuite/gas/sparc/fpcmpshl.d: Likewise.
	* testsuite/gas/sparc/fpcmpshl-diag.s: Likewise.
	* testsuite/gas/sparc/fpcmpshl-diag.l: Likewise.
	* testsuite/gas/sparc/ldm-stm.s: Likewise.
	* testsuite/gas/sparc/ldm-stm.d: Likewise.
	* testsuite/gas/sparc/ldm-stm-diag.s: Likewise.
	* testsuite/gas/sparc/ldm-stm-diag.l: Likewise.
	* testsuite/gas/sparc/ldmf-stmf.s: Likewise.
	* testsuite/gas/sparc/ldmf-stmf.d: Likewise.
	* testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise.
	* testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise.
	* testsuite/gas/sparc/on.s: Likewise.
	* testsuite/gas/sparc/on.d: Likewise.
	* testsuite/gas/sparc/on-diag.s: Likewise.
	* testsuite/gas/sparc/on-diag.l: Likewise.
	* testsuite/gas/sparc/rle.s: Likewise.
	* testsuite/gas/sparc/rle.d: Likewise.
	* testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests.
	* testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY.
	* testsuite/gas/sparc/rdasr.d: Likewise.

2017-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* testsuite/gas/sparc/call-relax.d: Support 32-bit targets.
	* testsuite/gas/sparc/sparc.exp (gas_64_check): Use -64 to
	run asi-bump-warn.

2017-05-19  Georg-Johann Lay  <avr@gjlay.de>

	PR ld/21472
	* config/tc-avr.c (mcu_types): Add entries for: attiny416,
	attiny417, attiny816, attiny817.

2017-05-18  Alan Modra  <amodra@gmail.com>

	* config/tc-aarch64.c: Don't compare booleans against TRUE or FALSE.
	* config/tc-hppa.c: Likewise.
	* config/tc-mips.c: Likewise.
	* config/tc-score7.c: Likewise.

2017-05-16  Alan Modra  <amodra@gmail.com>

	* write.c (GENERIC_FORCE_RELOCATION_LOCAL): Define.
	(TC_FORCE_RELOCATION_LOCAL): Use it.
	(GENERIC_FORCE_RELOCATION_SUB_SAME): Define.
	(TC_FORCE_RELOCATION_SUB_SAME): Use it.
	* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL,
	TC_FORCE_RELOCATION_SUB_SAME): Use GENERIC defines.
	* config/tc-aarch64.h: Similarly.
	* config/tc-avr.h: Similarly.
	* config/tc-cris.h: Similarly.
	* config/tc-i386.h: Similarly.
	* config/tc-i960.h: Similarly.
	* config/tc-ia64.h: Similarly.
	* config/tc-microblaze.h: Similarly.
	* config/tc-mips.h: Similarly.
	* config/tc-msp430.h: Similarly.
	* config/tc-nds32.h: Similarly.
	* config/tc-pru.h: Similarly.
	* config/tc-riscv.h: Similarly.
	* config/tc-rl78.h: Similarly.
	* config/tc-s390.h: Similarly.
	* config/tc-sh.h: Similarly.
	* config/tc-sh64.h: Similarly.
	* config/tc-sparc.h: Similarly.
	* config/tc-xtensa.h: Similarly.
	* config/tc-mn10300.h: Similarly.
	(GENERIC_FORCE_RELOCATION_LOCAL): Define.
	* config/tc-msp430.c (msp430_force_relocation_local): Modify to
	be addition to rather than replacement of standard
	TC_FORCE_RELOCATION_LOCAL.

2017-05-15  Nick Clifton  <nickc@redhat.com>

	PR gas/21458
	* config/tc-arm.c (do_adr): If the ADR involves a thumb function
	symbol, ensure that the T bit will be set.
	(do_adrl): Likewise.
	(do_t_adr): Likewise.
	* testsuite/gas/arm/pr21458.s: New test.
	* testsuite/gas/arm/pr21458.d: New test driver.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16-pcrel-1.d: Remove `-mips3' from `as'
	flags.
	* testsuite/gas/mips/mips16-pcrel-pic-1.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-n32-0.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-n32-1.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-n64-0.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-n64-1.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-reloc-4.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-reloc-5.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-reloc-6.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-reloc-7.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-4.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-5.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-6.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-7.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-9.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-2.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-3.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-6.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-7.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
	Likewise.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
	Likewise.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-0.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-1.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-2.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-n32-0.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-n32-1.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-0.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-1.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-delay-0.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-delay-1.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-2.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-3.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-6.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-7.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-2.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-3.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-6.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-7.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-8.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-9.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n32-8.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n32-9.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n64-sym32-8.d:
	New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n64-sym32-9.d:
	New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute.d: New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-1.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-2.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-3.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-4.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-5.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-6.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-7.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-4.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-6.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n32-4.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n32-6.d: New
	test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n64-sym32-4.d:
	New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n64-sym32-6.d:
	New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n32-4.d:
	New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n32-6.d:
	New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n64-sym32-4.d:
	New test.
	* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n64-sym32-6.d:
	New test.
	* testsuite/gas/mips/mips16-pcrel-1.l: Adjust line numbers.
	* testsuite/gas/mips/mips16-pcrel-1.s: Adjust for alignment
	preservation between MIPS16 and MIPS16e2 code.
	* testsuite/gas/mips/mips.exp: Run MIPS16 relaxation tests over
	all MIPS16 architectures.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16e2.d: New test.
	* testsuite/gas/mips/mips16e2-mt.d: New test.
	* testsuite/gas/mips/mips16e2-sub.d: New test.
	* testsuite/gas/mips/mips16e2@mips16e2-sub.d: New test.
	* testsuite/gas/mips/mips16e2-mt-sub.d: New test.
	* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: New test.
	* testsuite/gas/mips/mips16e2-hilo.d: New test.
	* testsuite/gas/mips/mips16e2-hilo-n32.d: New test.
	* testsuite/gas/mips/mips16e2-reloc-error.d: New test.
	* testsuite/gas/mips/mips16e2-imm-error.d: New test.
	* testsuite/gas/mips/elf_ase_mips16e2.d: New test.
	* testsuite/gas/mips/elf_ase_mips16e2-2.d: New test.
	* testsuite/gas/mips/elf-rel9-mips16e2.d: New test.
	* testsuite/gas/mips/mips16e2-lui.d: New test.
	* testsuite/gas/mips/mips16e2@mips32r2-sync.d: New test.
	* testsuite/gas/mips/mips16e2@mips32r2-sync-1.d: New test.
	* testsuite/gas/mips/mips16e2@lui-2.d: New test.
	* testsuite/gas/mips/mips16e2-reloc-error.l: New stderr output.
	* testsuite/gas/mips/mips16e2-imm-error.l: New stderr output.
	* testsuite/gas/mips/mips16e2@lui-2.l: New stderr output.
	* testsuite/gas/mips/mips16e2.s: New test source.
	* testsuite/gas/mips/mips16e2-mt.s: New test source.
	* testsuite/gas/mips/mips16e2-sub.s: New test source.
	* testsuite/gas/mips/mips16e2-mt-sub.s: New test source.
	* testsuite/gas/mips/mips16e2-hilo.s: New test source.
	* testsuite/gas/mips/mips16e2-reloc-error.s: New test source.
	* testsuite/gas/mips/mips16e2-imm-error.s: New test source.
	* testsuite/gas/mips/elf-rel9-mips16e2.s: New test source.
	* testsuite/gas/mips/mips16e2-lui.s: New test source.
	* testsuite/gas/mips/mips.exp: Expand `mips32r2-sync',
	`mips32r2-sync-1', `lui-1' and `lui-2' tests across MIPS16e2
	architectures.  Run the new tests.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips.exp (run_dump_test_arch): Add
	`mips16e2@' prefix.
	(run_list_test_arch): Likewise.
	(mips16e2-32, mips16e2-64): New architectures.
	* testsuite/gas/mips/mips16e2-32@mips16-macro.d: New test.
	* testsuite/gas/mips/mips16e2-32@mips16-macro-t.d: New test.
	* testsuite/gas/mips/mips16e2-32@mips16-macro-e.d: New test.
	* testsuite/gas/mips/mips16e2-32@mips16-insn-t.d: New test.
	* testsuite/gas/mips/mips16e2-32@mips16-insn-e.d: New test.
	* testsuite/gas/mips/mips16e2-32@mips16e-64.d: New test.
	* testsuite/gas/mips/mips16e2-32@mips16-sub.d: New test.
	* testsuite/gas/mips/mips16e2-32@mips16e-64-sub.d: New test.
	* testsuite/gas/mips/mips16e2@relax-swap3.d: New test.
	* testsuite/gas/mips/mips16-32@mips16-asmacro.d: Remove `source'
	tag.  Add `-I$srcdir/$subdir' to `as' flags.
	* testsuite/gas/mips/mips16-64@mips16-asmacro.d: Likewise.
	* testsuite/gas/mips/mips16e2-32@mips16-macro.l: New stderr
	output.
	* testsuite/gas/mips/mips16e2-32@mips16-macro-t.l: New stderr
	output.
	* testsuite/gas/mips/mips16e2-32@mips16-macro-e.l: New stderr
	output.
	* testsuite/gas/mips/mips16e2-32@mips16-insn-t.l: New stderr
	output.
	* testsuite/gas/mips/mips16e2-32@mips16-insn-e.l: New stderr
	output.
	* testsuite/gas/mips/mips16-sub.s: Add `.set nomips16e2'.
	* testsuite/gas/mips/mips16e-sub.s: Likewise.
	* testsuite/gas/mips/mips16e-64-sub.s: Likewise.
	* testsuite/gas/mips/mips16-asmacro.s: Remove `.set mips32'.
	* testsuite/gas/mips/mips16-32@mips16-asmacro.s: New test
	source.
	* testsuite/gas/mips/mips16-64@mips16-asmacro.s: New test
	source.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>
	    Matthew Fortune  <matthew.fortune@imgtec.com>
	    Andrew Bennett  <andrew.bennett@imgtec.com>

	* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
	(RELAX_MIPS16_E2): New macro.
	(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
	(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
	(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
	(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
	(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
	(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
	(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
	(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
	(mips16_immed_extend): New prototype.
	(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
	values.
	(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
	(mips_ases): Add "mips16e2" entry.
	(mips_set_ase): Handle MIPS16e2 ASE.
	(insn_insert_operand): Explicitly handle immediates with MIPS16
	instructions that require 32-bit encoding.
	(is_opcode_valid_16): Pass enabled ASE bitmask on to
	`opcode_is_member'.
	(validate_mips_insn): Explicitly handle immediates with MIPS16
	instructions that require 32-bit encoding.
	(operand_reg_mask) <OP_REG28>: Add handler.
	(match_reg28_operand): New function.
	(match_operand) <OP_REG28>: Add handler.
	(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
	(match_mips16_insn): Handle MIPS16 instructions that require
	32-bit encoding and `V' and `u' operand codes.
	(mips16_ip): Allow any characters except from `.' in opcodes.
	(mips16_immed_extend): Handle 9-bit immediates.  Do not shuffle
	immediates whose width is not one of these listed.
	(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
	(mips_relax_frag): Likewise.
	(md_convert_frag): Likewise.
	(mips_convert_ase_flags): Handle MIPS16e2 ASE.

	* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
	`-mno-mips16e2' options.
	(-mmips16e2, -mno-mips16e2): New options.
	* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
	`-mno-mips16e2' options.
	(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
	and `.set nomips16e2'.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (match_int_operand): Call
	`match_out_of_range' before returning failure for 0x8000-0xffff
	values conditionally allowed.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (match_int_operand): Call
	`match_not_constant' before returning failure for a non-constant
	16-bit immediate conditionally allowed.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (match_const_int): Call `match_out_of_range'
	rather than `match_not_constant' for unrelocated operands
	retrieved as an `O_big' expression.
	(match_int_operand): Call `match_out_of_range' for relocatable
	operands retrieved as an `O_big' expression.
	(match_mips16_insn): Call `match_out_of_range' for relaxable
	operands retrieved as an `O_big' expression.
	* testsuite/gas/mips/addiu-error.d: New test.
	* testsuite/gas/mips/mips16@addiu-error.d: New test.
	* testsuite/gas/mips/micromips@addiu-error.d: New test.
	* testsuite/gas/mips/break-error.d: New test.
	* testsuite/gas/mips/lui-1.l: Adjust error message.
	* testsuite/gas/mips/addiu-error.l: New stderr output.
	* testsuite/gas/mips/mips16@addiu-error.l: New stderr output.
	* testsuite/gas/mips/micromips@addiu-error.l: New stderr output.
	* testsuite/gas/mips/break-error.l: New stderr output.
	* testsuite/gas/mips/addiu-error.s: New test source.
	* testsuite/gas/mips/break-error.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (match_mips16_insn): Remove the explicit
	OT_INTEGER check before the `match_expression' call.
	* testsuite/gas/mips/mips16-insn-e.l: Adjust messages.
	* testsuite/gas/mips/mips16-32@mips16-insn-e.l: Likewise.
	* testsuite/gas/mips/mips16-64@mips16-insn-e.l: Likewise.
	* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: Likewise.
	* testsuite/gas/mips/mips16-reg-error.d: New test.
	* testsuite/gas/mips/mips16-reg-error.l: New stderr output.
	* testsuite/gas/mips/mips16-reg-error.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new test.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (match_mips16_insn): Call
	`match_not_constant' for a disallowed relocation operation.
	* testsuite/gas/mips/mips16-reloc-error.d: New test.
	* testsuite/gas/mips/mips16-reloc-error.l: New stderr output.
	* testsuite/gas/mips/mips16-reloc-error.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new test.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/lui-1.d: New test.
	* testsuite/gas/mips/lui-2.d: New test.
	* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
	into the new tests.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (match_const_int): Update description.

2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>

	* doc/as.texinfo (-mips16, -no-mips16): Refer to `.module
	mips16' rather than `.set mips16'.
	(-mmicromips, -mno-micromips): Refer to `.module micromips' and
	`.module nomicromips' rather than `.set micromips' and `.set
	nomicromips'.
	(-msmartmips, -mno-smartmips): Refer to `.module smartmips'
	rather than `.set smartmips'.
	* doc/c-mips.texi (MIPS Options): Refer to `.module mips16',
	`.module micromips', `.module nomicromips' and `.module
	smartmips' rather than `.set mips16', `.set micromips', `.set
	nomicromips' and `.set smartmips' respectively.

2017-05-12  Maciej W. Rozycki  <macro@imgtec.com>
	    Matthew Fortune  <matthew.fortune@imgtec.com>

	* config/tc-mips.c (mips_percent_op): Add "%gprel".
	(mips16_percent_op): Add "%gp_rel".
	* testsuite/gas/mips/elf-rel8.s:: Add `%gprel' forms.
	* testsuite/gas/mips/elf-rel8-mips16.s: Add `%gp_rel' forms.
	* testsuite/gas/mips/elf-rel8.d: Adjust accordingly.
	* testsuite/gas/mips/elf-rel8-mips16.d: Likewise.

2017-05-12  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
	* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
	* testsuite/gas/mips/mips16-64.d: Likewise.
	* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
	* testsuite/gas/mips/mips16-macro.d: Likewise.
	* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
	* testsuite/gas/mips/mips16-sub.d: Likewise.
	* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.

2017-05-11  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips32r2-sync-1.d: New test.
	* testsuite/gas/mips/micromips@mips32r2-sync-1.d: New test.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-05-10  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/isa-override-2.d: New test.
	* testsuite/gas/mips/mips1@isa-override-2.d: New test.
	* testsuite/gas/mips/r3000@isa-override-2.d: New test.
	* testsuite/gas/mips/r3900@isa-override-2.d: New test.
	* testsuite/gas/mips/mips2@isa-override-2.d: New test.
	* testsuite/gas/mips/mips32@isa-override-2.d: New test.
	* testsuite/gas/mips/mips32r2@isa-override-2.d: New test.
	* testsuite/gas/mips/mips32r3@isa-override-2.d: New test.
	* testsuite/gas/mips/mips32r5@isa-override-2.d: New test.
	* testsuite/gas/mips/mips32r6@isa-override-2.d: New test.
	* testsuite/gas/mips/octeon3@isa-override-2.d: New test.
	* testsuite/gas/mips/r3000@isa-override-2.l: Remove list test.
	* testsuite/gas/mips/mips1@isa-override-2.s: Remove test source.
	* testsuite/gas/mips/r3000@isa-override-2.s: Remove test source.
	* testsuite/gas/mips/r3900@isa-override-2.s: Remove test source.
	* testsuite/gas/mips/mips2@isa-override-2.s: Remove test source.
	* testsuite/gas/mips/mips32@isa-override-2.s: Remove test
	source.
	* testsuite/gas/mips/mips32r2@isa-override-2.s: Remove test
	source.
	* testsuite/gas/mips/mips32r3@isa-override-2.s: Remove test
	source.
	* testsuite/gas/mips/mips32r5@isa-override-2.s: Remove test
	source.
	* testsuite/gas/mips/mips32r6@isa-override-2.s: Remove test
	source.
	* testsuite/gas/mips/octeon3@isa-override-2.s: Remove test
	source.
	* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
	into the new tests.

2017-05-10  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16e-sub.d: Correct test name.
	* testsuite/gas/mips/mips16-32@mips16e-sub.d: Likewise.
	* testsuite/gas/mips/mips16-64@mips16e-sub.d: Likewise.
	* testsuite/gas/mips/mips16e-64-sub.d: Likewise.
	* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: Likewise.
	* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: Likewise.
	* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: Likewise.

2017-05-10  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/mips16-macro.l: Remove list test.

2017-05-10  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/r3900@ecoff@ld.d: Remove test.
	* testsuite/gas/mips/mips2@ecoff@ld.d: Remove test.
	* testsuite/gas/mips/mips32@ecoff@ld.d: Remove test.
	* testsuite/gas/mips/mips32r2@ecoff@ld.d: Remove test.
	* testsuite/gas/mips/r3900@ecoff@ld-forward.d: Remove test.
	* testsuite/gas/mips/mips2@ecoff@ld-forward.d: Remove test.
	* testsuite/gas/mips/mips32@ecoff@ld-forward.d: Remove test.
	* testsuite/gas/mips/mips32r2@ecoff@ld-forward.d: Remove test.
	* testsuite/gas/mips/mips1@ecoff@sd.d: Remove test.
	* testsuite/gas/mips/r3000@ecoff@sd.d: Remove test.
	* testsuite/gas/mips/r3900@ecoff@sd.d: Remove test.
	* testsuite/gas/mips/mips2@ecoff@sd.d: Remove test.
	* testsuite/gas/mips/mips32@ecoff@sd.d: Remove test.
	* testsuite/gas/mips/mips32r2@ecoff@sd.d: Remove test.
	* testsuite/gas/mips/mips1@ecoff@sd-forward.d: Remove test.
	* testsuite/gas/mips/r3000@ecoff@sd-forward.d: Remove test.
	* testsuite/gas/mips/r3900@ecoff@sd-forward.d: Remove test.
	* testsuite/gas/mips/mips2@ecoff@sd-forward.d: Remove test.
	* testsuite/gas/mips/mips32@ecoff@sd-forward.d: Remove test.
	* testsuite/gas/mips/mips32r2@ecoff@sd-forward.d: Remove test.

2017-05-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/gas/arc/attr-arc600.d: New file.
	* testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise.
	* testsuite/gas/arc/attr-arc600_norm.d: Likewise.
	* testsuite/gas/arc/attr-arc601.d: Likewise.
	* testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise.
	* testsuite/gas/arc/attr-arc601_mul64.d: Likewise.
	* testsuite/gas/arc/attr-arc601_norm.d: Likewise.
	* testsuite/gas/arc/attr-arc700.d: Likewise.
	* testsuite/gas/arc/attr-arcem.d: Likewise.
	* testsuite/gas/arc/attr-archs.d: Likewise.
	* testsuite/gas/arc/attr-autodetect-1.d: Likewise.
	* testsuite/gas/arc/attr-autodetect-1.s: Likewise.
	* testsuite/gas/arc/attr-cpu-a601.d: Likewise.
	* testsuite/gas/arc/attr-cpu-a601.s: Likewise.
	* testsuite/gas/arc/attr-cpu-a700.d: Likewise.
	* testsuite/gas/arc/attr-cpu-a700.s: Likewise.
	* testsuite/gas/arc/attr-cpu-em.d: Likewise.
	* testsuite/gas/arc/attr-cpu-em.s: Likewise.
	* testsuite/gas/arc/attr-cpu-hs.d: Likewise.
	* testsuite/gas/arc/attr-cpu-hs.s: Likewise.
	* testsuite/gas/arc/attr-em.d: Likewise.
	* testsuite/gas/arc/attr-em4.d: Likewise.
	* testsuite/gas/arc/attr-em4_dmips.d: Likewise.
	* testsuite/gas/arc/attr-em4_fpuda.d: Likewise.
	* testsuite/gas/arc/attr-em4_fpus.d: Likewise.
	* testsuite/gas/arc/attr-hs.d: Likewise.
	* testsuite/gas/arc/attr-hs34.d: Likewise.
	* testsuite/gas/arc/attr-hs38.d: Likewise.
	* testsuite/gas/arc/attr-hs38_linux.d: Likewise.
	* testsuite/gas/arc/attr-mul64.d: Likewise.
	* testsuite/gas/arc/attr-name.d: Likewise.
	* testsuite/gas/arc/attr-name.s: Likewise.
	* testsuite/gas/arc/attr-nps400.d: Likewise.
	* testsuite/gas/arc/attr-override-mcpu.d: Likewise.
	* testsuite/gas/arc/attr-override-mcpu.s
	* testsuite/gas/arc/attr-quarkse_em.d: Likewise.
	* testsuite/gas/arc/blank.s: Likewise.
	* testsuite/gas/elf/section2.e-arc: Likewise.
	* testsuite/gas/arc/cpu-pseudop-1.d: Update test.
	* testsuite/gas/arc/cpu-pseudop-2.d: Likewise.
	* testsuite/gas/arc/nps400-0.d: Likewise.
	* testsuite/gas/elf/elf.exp: Set target_machine for ARC.
	* config/tc-arc.c (opcode/arc-attrs.h): Include.
	(ARC_GET_FLAG, ARC_SET_FLAG, streq): Define.
	(arc_attribute): Declare new function.
	(md_pseudo_table): Add arc_attribute.
	(cpu_types): Rename default cpu features.
	(selected_cpu): Set the default OSABI flag.
	(mpy_option): New variable.
	(pic_option): Likewise.
	(sda_option): Likewise.
	(tls_option): Likewise.
	(feature_type, feature_list): Remove.
	(arc_initial_eflag): Likewise.
	(attributes_set_explicitly): New variable.
	(arc_check_feature): Check also for the conflicting features.
	(arc_select_cpu): Refactor assignment of selected_cpu.eflags.
	(arc_option): Remove setting of private flags and architecture.
	(check_cpu_feature): Refactor feature names.
	(autodetect_attributes): New function.
	(assemble_tokens): Use above function.
	(md_parse_option): Refactor feature names.
	(arc_attribute): New function.
	(arc_set_attribute_int): Likewise.
	(arc_set_attribute_string): Likewise.
	(arc_stralloc): Likewise.
	(arc_set_public_attributes): Likewise.
	(arc_md_end): Likewise.
	(arc_copy_symbol_attributes): Likewise.
	(rc_convert_symbolic_attribute): Likewise.
	* config/tc-arc.h (md_end): Define.
	(CONVERT_SYMBOLIC_ATTRIBUTE): Likewise.
	(TC_COPY_SYMBOL_ATTRIBUTES): Likewise.
	* doc/c-arc.texi: Document ARC object attributes.

2017-05-03  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `pic', `sym32' and
	`nomacro' flags.
	(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO):
	New macros.
	(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
	(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
	(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
	(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
	(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
	(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): Shift bits.
	(RELAX_MIPS16_MACRO, RELAX_MIPS16_MARK_MACRO)
	(RELAX_MIPS16_CLEAR_MACRO): New macros.
	(append_insn): Pass `mips_pic', HAVE_32BIT_SYMBOLS and
	`mips_opts.warn_about_macros' settings to RELAX_MIPS16_ENCODE.
	(mips16_macro_frag): New function.
	(md_estimate_size_before_relax): Handle HI16/LO16 relaxation.
	(mips_relax_frag): Likewise.
	(md_convert_frag): Likewise.

	* testsuite/gas/mips/mips16@relax-swap3.d: Remove error output,
	add dump patterns.
	* testsuite/gas/mips/mips16e@relax-swap3.d: New test
	subarchitecture.
	* testsuite/gas/mips/micromips@relax-swap3.d: Remove trailing
	NOP padding.
	* testsuite/gas/mips/mips16-pcrel-reloc-2.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16-pcrel-reloc-3.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16-pcrel-reloc-6.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16-pcrel-reloc-7.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16-pcrel-addend-2.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16-pcrel-addend-3.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16-pcrel-absolute.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16-pcrel-absolute-1.d: Remove error
	output, add dump patterns.
	* testsuite/gas/mips/mips16@relax-swap3.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-reloc-2.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-reloc-3.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-reloc-6.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-reloc-7.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-addend-2.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-addend-3.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-absolute.l: Remove file.
	* testsuite/gas/mips/mips16-pcrel-absolute-1.l: Remove file.
	* testsuite/gas/mips/relax-swap3.s: Adjust trailing padding.

	* testsuite/gas/mips/mips16-pcrel-0.d: New test.
	* testsuite/gas/mips/mips16-pcrel-1.d: New test.
	* testsuite/gas/mips/mips16-pcrel-2.d: New test.
	* testsuite/gas/mips/mips16-pcrel-3.d: New test.
	* testsuite/gas/mips/mips16-pcrel-4.d: New test.
	* testsuite/gas/mips/mips16-pcrel-5.d: New test.
	* testsuite/gas/mips/mips16-pcrel-pic-0.d: New test.
	* testsuite/gas/mips/mips16-pcrel-pic-1.d: New test.
	* testsuite/gas/mips/mips16-pcrel-n32-0.d: New test.
	* testsuite/gas/mips/mips16-pcrel-n32-1.d: New test.
	* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: New test.
	* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: New test.
	* testsuite/gas/mips/mips16-pcrel-n64-0.d: New test.
	* testsuite/gas/mips/mips16-pcrel-n64-1.d: New test.
	* testsuite/gas/mips/mips16-pcrel-delay-0.d: New test.
	* testsuite/gas/mips/mips16-pcrel-delay-1.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-4.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-5.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-6.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-7.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-8.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-9.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-pic-8.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: New test.
	* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-2.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-3.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-4.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-5.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-6.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-7.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-4.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d: New
	test.
	* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d: New
	test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d: New
	test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d: New
	test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d: New
	test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d: New
	test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
	New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
	New test.
	* testsuite/gas/mips/mips16-pcrel-0.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-1.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-2.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-3.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-4.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-5.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-delay-0.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-delay-1.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-addend-8.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-addend-9.l: New stderr output.
	* testsuite/gas/mips/mips16-pcrel-absolute-4.l: New stderr
	output.
	* testsuite/gas/mips/mips16-pcrel-absolute-6.l: New stderr
	output.
	* testsuite/gas/mips/mips16-pcrel-0.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-1.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-2.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-3.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-4.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-5.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-delay-0.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-delay-1.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-addend-4.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-addend-5.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-addend-6.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-addend-7.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-addend-8.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-addend-9.s: New test source.
	* testsuite/gas/mips/mips16-pcrel-absolute-2.s: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-3.s: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-4.s: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-5.s: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-6.s: New test.
	* testsuite/gas/mips/mips16-pcrel-absolute-7.s: New test.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-05-03  Nick Clifton  <nickc@redhat.com>

	PR gas/20941
	* symbols.c (snapshot_symbol): Handle the case where
	resolve_expression returns a local symbol.

2017-05-02  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (append_insn): Call `symbol_append' for any
	expression symbol created for MIPS16 relaxation.
	(match_mips16_insn): Don't encode a constant value as an
	immediate with a PC-relative operand.

	* testsuite/gas/mips/mips16-pcrel-absolute-1.d: New test.
	* testsuite/gas/mips/mips16-branch-absolute-1.d: New test.
	* testsuite/gas/mips/mips16-branch-absolute-2.d: New test.
	* testsuite/gas/mips/mips16-branch-absolute-addend-1.d: New
	test.
	* testsuite/gas/mips/mips16-branch-absolute-n32-1.d: New test.
	* testsuite/gas/mips/mips16-branch-absolute-n32-2.d: New test.
	* testsuite/gas/mips/mips16-branch-absolute-addend-n32-1.d: New
	test.
	* testsuite/gas/mips/mips16-branch-absolute-n64-1.d: New test.
	* testsuite/gas/mips/mips16-branch-absolute-n64-2.d: New test.
	* testsuite/gas/mips/mips16-branch-absolute-addend-n64-1.d: New
	test.
	* testsuite/gas/mips/mips16-pcrel-absolute-1.l: New stderr
	output.
	* testsuite/gas/mips/mips16-pcrel-absolute-1.s: New test source.
	* testsuite/gas/mips/mips16-branch-absolute-1.s: New test
	source.
	* testsuite/gas/mips/mips16-branch-absolute-2.s: New test
	source.
	* testsuite/gas/mips/mips16-branch-absolute-addend-1.s: New test
	source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-04-27  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (mips16_pcrel_val): New function, factored
	out from...
	(mips16_extended_frag): ... here.
	(md_convert_frag): Use `mips16_pcrel_val' rather than repeated
	code in MIPS16 relaxation, with `stretch' hardcoded to 0.

2017-04-27  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (RELAX_MIPS16_LONG_BRANCH): Rename to...
	(RELAX_MIPS16_ALWAYS_EXTENDED): ... this.
	(RELAX_MIPS16_MARK_LONG_BRANCH): Rename to...
	(RELAX_MIPS16_MARK_ALWAYS_EXTENDED): ... this.
	(RELAX_MIPS16_CLEAR_LONG_BRANCH): Rename to...
	(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): ... this.
	(mips16_extended_frag): Adjust accordingly.

2017-04-27  Alan Modra  <amodra@gmail.com>

	* symbols.c (S_FORCE_RELOC): Separate section and symbol tests.

2017-04-26  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (RELAX_ENCODE): Add `PIC' flag.
	(RELAX_PIC): New macro.
	(RELAX_USE_SECOND, RELAX_SECOND_LONGER, RELAX_NOMACRO)
	(RELAX_DELAY_SLOT, RELAX_DELAY_SLOT_16BIT)
	(RELAX_DELAY_SLOT_SIZE_FIRST, RELAX_DELAY_SLOT_SIZE_SECOND):
	Shift bits.
	(RELAX_BRANCH_ENCODE): Add `pic' flag.
	(RELAX_BRANCH_UNCOND, RELAX_BRANCH_LIKELY, RELAX_BRANCH_LINK)
	(RELAX_BRANCH_TOOFAR): Shift bits.
	(RELAX_BRANCH_PIC): New macro.
	(RELAX_MICROMIPS_ENCODE): Add `pic' flag.
	(RELAX_MICROMIPS_PIC): New macro.
	(RELAX_MICROMIPS_UNCOND, RELAX_MICROMIPS_COMPACT)
	(RELAX_MICROMIPS_LINK, RELAX_MICROMIPS_NODS)
	(RELAX_MICROMIPS_RELAX32): Shift bits.
	(relax_close_frag): Pass `mips_pic' setting to RELAX_ENCODE.
	(append_insn): Pass `mips_pic' setting to RELAX_BRANCH_ENCODE
	and RELAX_MICROMIPS_ENCODE, and record it in `fx_tcbit2' of the
	first fixup created.
	(md_apply_fix) <BFD_RELOC_16_PCREL_S2>: Use `fx_tcbit2' of the
	fixup processed rather than `mips_pic' in choosing to relax an
	out of range branch to a jump.
	(relaxed_branch_length): Use the `pic' flag of the relaxed frag
	rather than `mips_pic'.
	(relaxed_micromips_32bit_branch_length): Likewise.
	(md_estimate_size_before_relax): Likewise.
	(md_convert_frag): Likewise.

	* testsuite/gas/mips/option-pic-relax-0.d: New test.
	* testsuite/gas/mips/option-pic-relax-1.d: New test.
	* testsuite/gas/mips/option-pic-relax-2.d: New test.
	* testsuite/gas/mips/option-pic-relax-3.d: New test.
	* testsuite/gas/mips/option-pic-relax-3a.d: New test.
	* testsuite/gas/mips/option-pic-relax-4.d: New test.
	* testsuite/gas/mips/option-pic-relax-5.d: New test.
	* testsuite/gas/mips/option-pic-relax-2.l: New stderr output.
	* testsuite/gas/mips/option-pic-relax-3.l: New stderr output.
	* testsuite/gas/mips/option-pic-relax-4.l: New stderr output.
	* testsuite/gas/mips/option-pic-relax-5.l: New stderr output.
	* testsuite/gas/mips/option-pic-relax-0.s: New test source.
	* testsuite/gas/mips/option-pic-relax-1.s: New test source.
	* testsuite/gas/mips/option-pic-relax-2.s: New test source.
	* testsuite/gas/mips/option-pic-relax-3.s: New test source.
	* testsuite/gas/mips/option-pic-relax-4.s: New test source.
	* testsuite/gas/mips/option-pic-relax-5.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-04-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/gas/arc/leave_enter.d: Update test.
	* testsuite/gas/arc/leave_enter.s: Likewise.

2017-04-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/gas/arc/b.d: Update test.
	* testsuite/gas/arc/noargs_hs.d: Likewise.

2017-04-25  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (md_convert_frag): Correct
	BFD_RELOC_MIPS16_16_PCREL_S1 fixup size.
	* testsuite/gas/mips/mips16-branch-addend-4.d: New test.
	* testsuite/gas/mips/mips16-branch-addend-5.d: New test.
	* testsuite/gas/mips/mips16-branch-addend-5.l: New stderr
	output.
	* testsuite/gas/mips/mips16-branch-addend-4.s: New test source.
	* testsuite/gas/mips/mips16-branch-addend-5.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-04-25  Jose E. Marchesi  <jose.marchesi@oracle.com>

	PR gas/21407
	* config/tc-sparc.c (md_apply_fix): Do not transform `call'
	instructions into branch instructions in fixups generating
	additional relocations.
	* testsuite/gas/sparc/call-relax.s: New file.
	* testsuite/gas/sparc/call-relax.d: Likewise.
	* testsuite/gas/sparc/call-relax-aout.d: Likewise.
	* testsuite/gas/sparc/sparc.exp: Test call-relax and call-relax-aout.

2017-04-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (move_or_literal_pool): Remove code generating MOVS.
	Forbid MOV.W and MOVW if destination is SP or PC.
	* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.s: Explain
	expectation of LDR not generating a MOVS for low registers and small
	constants.  Add tests of MOVW generation.
	* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Update
	expected disassembly.

2017-04-22  Alan Modra  <amodra@gmail.com>

	* testsuite/gas/ppc/vle.s: Format.  Add se_rfgi and e_sc.
	* testsuite/gas/ppc/vle.d: Update.

2017-04-21  Nick Clifton  <nickc@redhat.com>

	PR binutils/21380
	* testsuite/gas/aarch64/illegal-3.s: New file.
	* testsuite/gas/aarch64/illegal-3.d: New file.

2017-04-11  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_show_usage): Delete mention of -mhtm.
	* testsuite/gas/ppc/htm.d: Pass -mpower8 and -Mpower8.

2017-04-10  Max Filippov  <jcmvbkbc@gmail.com>

	* config/tc-xtensa.c (xtensa_maybe_create_literal_pool_frag):
	Initialize lps->frag_count with auto_litpool_limit.
	(xg_promote_candidate_litpool): New function.
	(xtensa_move_literals): Extract candidate litpool promotion code
	into separate function. Call it for all possible found
	candidates.
	(xtensa_switch_to_literal_fragment): Drop 'recursive' flag and
	call to xtensa_mark_literal_pool_location that it guards.
	Replace it with call to xtensa_maybe_create_literal_pool_frag.
	Initialize pool_location with created literal pool candidate.
	* testsuite/gas/xtensa/all.exp: Add new tests.
	* testsuite/gas/xtensa/auto-litpools-first1.d: New test results.
	* testsuite/gas/xtensa/auto-litpools-first1.s: New test.
	* testsuite/gas/xtensa/auto-litpools-first2.d: New test results.
	* testsuite/gas/xtensa/auto-litpools-first2.s: New test.
	* testsuite/gas/xtensa/auto-litpools.d: Fix offsets changed due
	to additional jump instruction.

2017-04-07  Alan Modra  <amodra@gmail.com>

	* testsuite/gas/ppc/altivec2.s: Delete E6500 vector insns.
	* testsuite/gas/ppc/altivec2.d: Adjust to suit.

2017-04-07  Alan Modra  <amodra@gmail.com>

	* testsuite/gas/elf/section12a.d: Don't expect alignment of 1
	for .mbind.text.

2017-04-06  Pip Cet  <pipcet@gmail.com>

	* testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
	changes.
	* testsuite/gas/wasm32/disass.d: New test.
	* testsuite/gas/wasm32/disass.s: New test.
	* testsuite/gas/wasm32/disass-2.d: New test.
	* testsuite/gas/wasm32/disass-2.s: New test.
	* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
	names.
	* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
	syntax.
	* testsuite/gas/wasm32/wasm32.exp: Run new tests.  Expect allinsn
	test to succeed.

2017-04-04  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention support for ELF SHF_GNU_MBIND.
	* config/obj-elf.c (section_match): New.
	(get_section): Match both sh_info and group name.
	(obj_elf_change_section): Add argument for sh_info.  Pass both
	sh_info and group name to get_section. Issue an error for
	SHF_GNU_MBIND section without SHF_ALLOC.  Set sh_info.
	(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
	(obj_elf_section): Support SHF_GNU_MBIND section info.
	* config/obj-elf.h (obj_elf_change_section): Add argument for
	sh_info.
	* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
	obj_elf_change_section.
	* config/tc-ia64.c (obj_elf_vms_common): Likewise.
	* config/tc-microblaze.c (microblaze_s_data): Likewise.
	(microblaze_s_sdata): Likewise.
	(microblaze_s_rdata): Likewise.
	(microblaze_s_bss): Likewise.
	* config/tc-mips.c (s_change_section): Likewise.
	* config/tc-msp430.c (msp430_profiler): Likewise.
	* config/tc-rx.c (parse_rx_section): Likewise.
	* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
	* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
	* testsuite/gas/elf/elf.exp: Run section12a, section12b and
	section13.
	* testsuite/gas/elf/section10.d: Updated.
	* testsuite/gas/elf/section10.s: Likewise.
	* testsuite/gas/elf/section12.s: New file.
	* testsuite/gas/elf/section12a.d: Likewise.
	* testsuite/gas/elf/section12b.d: Likewise.
	* testsuite/gas/elf/section13.l: Likewise.
	* testsuite/gas/elf/section13.d: Likewise.
	* testsuite/gas/elf/section13.s: Likewise.

2017-04-03  Palmer Dabbelt  <palmer@dabbelt.com>

	* config/tc-riscv.c (riscv_clear_subsets): Cast argument to free to
	avoid const warnings.

2017-03-30  Palmer Dabbelt  <palmer@dabbelt.com>

	* config/tc-riscv.c (riscv_clear_subsets): New function.
	(riscv_add_subset): Call riscv_clear_subsets and riscv_set_rvc to
	clear RVC when it's been previously set.

2017-03-31  Nick Clifton  <nickc@redhat.com>

	PR gas/21333
	* config/tc-s390.c (tc_s390_fix_adjustable): Allow non pc-relative
	fixups in mergeable sections to be adjusted.

2017-03-30  Pip Cet  <pipcet@gmail.com>

	* config/tc-wasm32.h: New file: Add WebAssembly assembler target.
	* config/tc-wasm32.c: New file: Add WebAssembly assembler target.
	* Makefile.am: Add WebAssembly assembler target.
	* configure.tgt: Add WebAssembly assembler target.
	* doc/c-wasm32.texi: New file: Start documenting WebAssembly
	assembler.
	* doc/all.texi: Define WASM32.
	* doc/as.texinfo: Add WebAssembly entries.
	* NEWS: Mention the new support.
	* Makefile.in: Regenerate.
	* po/gas.pot: Regenerate.
	* po/POTFILES.in: Regenerate.
	* testsuite/gas/wasm32: New directory.
	* testsuite/gas/wasm32/allinsn.d: New file.
	* testsuite/gas/wasm32/allinsn.s: New file.
	* testsuite/gas/wasm32/illegal.l: New file.
	* testsuite/gas/wasm32/illegal.s: New file.
	* testsuite/gas/wasm32/illegal-2.l: New file.
	* testsuite/gas/wasm32/illegal-2.s: New file.
	* testsuite/gas/wasm32/illegal-3.l: New file.
	* testsuite/gas/wasm32/illegal-3.s: New file.
	* testsuite/gas/wasm32/illegal-4.l: New file.
	* testsuite/gas/wasm32/illegal-4.s: New file.
	* testsuite/gas/wasm32/illegal-5.l: New file.
	* testsuite/gas/wasm32/illegal-5.s: New file.
	* testsuite/gas/wasm32/illegal-6.l: New file.
	* testsuite/gas/wasm32/illegal-6.s: New file.
	* testsuite/gas/wasm32/illegal-7.l: New file.
	* testsuite/gas/wasm32/illegal-7.s: New file.
	* testsuite/gas/wasm32/illegal-8.l: New file.
	* testsuite/gas/wasm32/illegal-8.s: New file.
	* testsuite/gas/wasm32/illegal-9.l: New file.
	* testsuite/gas/wasm32/illegal-9.s: New file.
	* testsuite/gas/wasm32/illegal-10.l: New file.
	* testsuite/gas/wasm32/illegal-10.s: New file.
	* testsuite/gas/wasm32/illegal-11.l: New file.
	* testsuite/gas/wasm32/illegal-11.s: New file.
	* testsuite/gas/wasm32/illegal-12.l: New file.
	* testsuite/gas/wasm32/illegal-12.s: New file.
	* testsuite/gas/wasm32/illegal-13.l: New file.
	* testsuite/gas/wasm32/illegal-13.s: New file.
	* testsuite/gas/wasm32/illegal-14.l: New file.
	* testsuite/gas/wasm32/illegal-14.s: New file.
	* testsuite/gas/wasm32/illegal-15.l: New file.
	* testsuite/gas/wasm32/illegal-15.s: New file.
	* testsuite/gas/wasm32/illegal-16.l: New file.
	* testsuite/gas/wasm32/illegal-16.s: New file.
	* testsuite/gas/wasm32/illegal-17.l: New file.
	* testsuite/gas/wasm32/illegal-17.s: New file.
	* testsuite/gas/wasm32/illegal-18.l: New file.
	* testsuite/gas/wasm32/illegal-18.s: New file.
	* testsuite/gas/wasm32/illegal-19.l: New file.
	* testsuite/gas/wasm32/illegal-19.s: New file.
	* testsuite/gas/wasm32/illegal-20.l: New file.
	* testsuite/gas/wasm32/illegal-20.s: New file.
	* testsuite/gas/wasm32/illegal-21.l: New file.
	* testsuite/gas/wasm32/illegal-21.s: New file.
	* testsuite/gas/wasm32/illegal-22.l: New file.
	* testsuite/gas/wasm32/illegal-22.s: New file.
	* testsuite/gas/wasm32/illegal-24.l: New file.
	* testsuite/gas/wasm32/illegal-24.s: New file.
	* testsuite/gas/wasm32/illegal-25.l: New file.
	* testsuite/gas/wasm32/illegal-25.s: New file.
	* testsuite/gas/wasm32/reloc.d: New file.
	* testsuite/gas/wasm32/reloc.s: New file.
	* testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly
	architecture.

2017-03-29  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_parse_option): Reject -mraw.

2017-03-27  Alan Modra  <amodra@gmail.com>

	PR 21303
	* testsuite/gas/ppc/pr21303.d,
	* testsuite/gas/ppc/pr21303.s: New test
	* testsuite/gas/ppc/ppc.exp: Run it.

2017-03-27  Rinat Zelig  <rinat@mellanox.com>

	* testsuite/gas/arc/nps400-12.s: New file.
	* testsuite/gas/arc/nps400-12.d: New file.

2017-03-24  Thomas preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.: (md_begin): Set selected_cpu from *mcpu_cpu_opt when
	CPU_DEFAULT is defined.

2017-03-21  Palmer Dabbbelt  <palmer@dabbelt.com>

	* config/tc-riscv.c (md_show_usage): Remode defuct -m32, -m64,
	-msoft-float, -mhard-float, -mno-rvc, and -mrvc options; and don't
	print an invalid default ISA string.
	* doc/c-riscv.texi (OPTIONS): Add -fpic and -fno-pic options.

2017-03-22  Max Filippov  <jcmvbkbc@gmail.com>

	* config/tc-xtensa.c (xtensa_relax_frag): Change fx_size of the
	reassigned fixup to size of jump instruction (3) and fx_r_type
	to BFD_RELOC_XTENSA_SLOT0_OP, as there's only one slot.
	(add_jump_to_trampoline): Search
	origfrag->tc_frag_data.slot_symbols for the slot with non-NULL
	symbol and use that slot instead of slot 0.

2017-03-21  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
	from cpu_table.  Remove vx2, and novx2 from cpu_flags.

2017-03-21  Rinat Zelig  <rinat@mellanox.com>

	* testsuite/gas/arc/nps400-11.s: New file.
	* testsuite/gas/arc/nps400-11.d: New file.

2017-03-20  Nick Clifton  <nickc@redhat.com>

	* doc/as.texinfo (2byte): Note that if no expressions are present
	the directive does nothing.  Emphasize that the output is
	unaligned, and that this can have an effect on the relocations
	generated.
	(4byte): Simplify description.  Refer back to the 2byte
	description.
	(8byte): Likewise.

2017-03-20  Richard Earnshaw  <rearnsha@arm.com>

	* config/tc-arm.c (arm_fpus): Note entires that should not be
	documented.
	* doc/c-arm.texi (-mfpu): Add missing FPU entries for neon-vfpv3 and
	neon-fp16.  Fix spelling error.

2017-03-20  Richard Earnshaw  <rearnsha@arm.com>

	* config/tc-arm.c (arm_fpus): Add neon-vfpv3 as an alias for neon.

2017-03-16  Rinat Zelig  <rinat@mellanox.com>

	* config/tc-arc.c (assemble_insn): Only handle ".t" and ".nt"
	specially for ARCv2.

2017-03-14  Kito Cheng  <kito.cheng@gmail.com>

	* config/tc-riscv.c (validate_riscv_insn): Add 'o' RVC immediate
	encoding format, which can accept 0-valued immediates.
	(riscv_ip): Likewise.

2017-03-15  Nick Clifton  <nickc@redhat.com>

	* config/tc-riscv.c (riscv_pre_output_hook): Fix compile time
	warning about discarding a const qualifier.

2017-03-02  Kuan-Lin Chen  <rufus@andestech.com>

	* config/tc-riscv.h (HWARD2_USE_FIXED_ADVANCE_PC): New define.

2017-03-02  Kuan-Lin Chen  <rufus@andestech.com>

	* config/tc-riscv.c (md_apply_fix): Set fx_frag and
	fx_next->fx_frag for CFA_advance_loc relocations.

2017-03-02  Kuan-Lin Chen  <rufus@andestech.com>

	* config/tc-riscv.c (md_apply_fix): Compute the correct offsets
	for CFA relocations.

2017-03-13  Nick Clifton  <nickc@redhat.com>

	PR binutils/21202
	* config/tc-aarch64.c (reloc_table): Rename
	BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC to
	BFD_RELOC_AARCH64_TLSDESC_LD64_LO12.  Rname
	BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC to
	BFD_RELOC_AARCH64_TLSDESC_ADD_LO12.
	(md_apply_fix): Likewise.
	(aarch64_force_relocation): Likewise.
	* testsuite/gas/aarch64/tls.d: Update regexp.

2017-03-10  Tobin C. Harding  <me@tobin.cc>
	    Nick Clifton  <nickc@redhat.com>

	* doc/as.texinfo (2byte): Tidy up wording.  Add note that
	overlarge values will produce a warning message and be trunacted.
	(4byte): Likewise.

2017-03-09  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (_i386_insn): Add dir_encoding and
	vec_encoding.  Remove swap_operand and need_vrex.
	(extra_symbol_chars): Add '}'.
	(md_begin): Mark '}' with LEX_BEGIN_NAME.  Allow '}' in
	mnemonic.
	(build_vex_prefix): Don't use 2-byte VEX encoding with
	{vex3}.  Check dir_encoding and load.
	(parse_insn): Check pseudo prefixes.  Set dir_encoding.
	(VEX_check_operands): Likewise.
	(match_template): Check dir_encoding and load.
	(parse_real_register): Set vec_encoding instead of need_vrex.
	(parse_register): Likewise.
	* doc/c-i386.texi: Document {disp8}, {disp32}, {load}, {store},
	{vex2}, {vex3} and {evex}.  Remove ".s", ".d8" and ".d32"
	* testsuite/gas/i386/i386.exp: Run pseudos and x86-64-pseudos.
	* testsuite/gas/i386/pseudos.d: New file.
	* testsuite/gas/i386/pseudos.s: Likewise.
	* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
	* testsuite/gas/i386/x86-64-pseudos.s: Likewise.

2017-03-08  Peter Bergner <bergner@vnet.ibm.com>

	* testsuite/gas/ppc/altivec2.d (as): Use the -mpower8 option.
	(objdump): Use the -Mpower8 option.

2017-03-08  Peter Bergner <bergner@vnet.ibm.com>

	* testsuite/gas/ppc/power9.d <lnia> New test.
	* testsuite/gas/ppc/power9.s: Likewise.

2017-03-07  Alan Modra  <amodra@gmail.com>

	* doc/as.texinfo (2byte, 4byte, 8byte): Correct @section placement.

2017-03-07  Tobin C. Harding  <me@tobin.cc>
	    Alan Modra  <amodra@gmail.com>

	* doc/as.texinfo (2byte, 4byte, 8byte): Document.
	* doc/c-arm.texi (2byte, 4byte, 8byte): Omit if ELF.

2017-03-06  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (cpu_arch): Add .cet.
	* doc/c-i386.texi: Document cet.
	* testsuite/gas/i386/cet-intel.d: New file.
	* testsuite/gas/i386/cet.d: Likewise.
	* testsuite/gas/i386/cet.s: Likewise.
	* testsuite/gas/i386/x86-64-cet-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-cet.d: Likewise.
	* testsuite/gas/i386/x86-64-cet.s: Likewise.
	* testsuite/gas/i386/i386.exp: Run Intel CET tests.

2017-03-06  H.J. Lu  <hongjiu.lu@intel.com>

	* testsuite/gas/i386/x86-64-mpx-inval-2.s: Force a good alignment.
	* testsuite/gas/i386/x86-64-mpx-inval-2.l: Expect [0-9A-F]+.

2017-03-06  Alan Modra  <amodra@gmail.com>

	* dw2gencfi.c (encoding_size): Return unsigned int.
	(emit_expr_encoded): Assert size matches reloc bitsize.
	(output_fde): Use unsigned for offset_size and addr_size.  Set
	addr_size earlier and use in place of constant 4 and uses of
	DWARF2_FDE_RELOC_SIZE.  Assert it matches reloc bitsize.

2017-03-06  Alan Modra  <amodra@gmail.com>

	* dw2gencfi.c: Wrap overlong lines.  Add parens for emacs
	auto reformat.  Formatting and whitespace fixes.

2017-03-05  Mark Wielaard  <mark@klomp.org>

	* dwarf2dbg.c (out_debug_abbrev): Use DW_FORM_strp instead of
	DW_FORM_string for DW_AT_name, DW_AT_comp_dir and DW_AT_producer.
	(out_debug_info): Accept symbols to name, comp_dir and producer in
	the .debug_str section and emit those offsets not full strings.
	(out_debug_str): New function that outputs the strings for name,
	comp_dir and producer in .debug_str and generates symbols to those
	strings.
	(out_debug_line): Create a .debug_str section if necessary and call
	out_debug_str before calling out_debug_info.
	* testsuite/gas/aarch64/dwarf.d: Add extra section symbol to expected
	output.

2017-03-02  Maciej W. Rozycki  <macro@imgtec.com>

	* write.c (relax_segment) <rs_org>: Only bail out if the fixed
	part of the frag has overrun the location requested.

	* testsuite/gas/all/org-1.d: New test.
	* testsuite/gas/all/org-2.d: New test.
	* testsuite/gas/all/org-3.d: New test.
	* testsuite/gas/all/org-4.d: New test.
	* testsuite/gas/all/org-5.d: New test.
	* testsuite/gas/all/org-6.d: New test.
	* testsuite/gas/all/org-1.l: New stderr output.
	* testsuite/gas/all/org-2.l: New stderr output.
	* testsuite/gas/all/org-3.l: New stderr output.
	* testsuite/gas/all/org-1.s: New test source.
	* testsuite/gas/all/org-2.s: New test source.
	* testsuite/gas/all/org-3.s: New test source.
	* testsuite/gas/all/org-4.s: New test source.
	* testsuite/gas/all/org-5.s: New test source.
	* testsuite/gas/all/org-6.s: New test source.
	* testsuite/gas/all/gas.exp: Run the new tests.

	* testsuite/gas/mips/org-1.d: New test.
	* testsuite/gas/mips/org-2.d: New test.
	* testsuite/gas/mips/org-3.d: New test.
	* testsuite/gas/mips/org-4.d: New test.
	* testsuite/gas/mips/org-5.d: New test.
	* testsuite/gas/mips/org-6.d: New test.
	* testsuite/gas/mips/org-7.d: New test.
	* testsuite/gas/mips/org-8.d: New test.
	* testsuite/gas/mips/org-9.d: New test.
	* testsuite/gas/mips/org-10.d: New test.
	* testsuite/gas/mips/org-11.d: New test.
	* testsuite/gas/mips/org-12.d: New test.
	* testsuite/gas/mips/org-1.l: New stderr output.
	* testsuite/gas/mips/org-4.l: New stderr output.
	* testsuite/gas/mips/org-5.l: New stderr output.
	* testsuite/gas/mips/org-6.l: New stderr output.
	* testsuite/gas/mips/org-10.l: New stderr output.
	* testsuite/gas/mips/org-1.s: New test source.
	* testsuite/gas/mips/org-2.s: New test source.
	* testsuite/gas/mips/org-3.s: New test source.
	* testsuite/gas/mips/org-4.s: New test source.
	* testsuite/gas/mips/org-5.s: New test source.
	* testsuite/gas/mips/org-6.s: New test source.
	* testsuite/gas/mips/org-7.s: New test source.
	* testsuite/gas/mips/org-8.s: New test source.
	* testsuite/gas/mips/org-9.s: New test source.
	* testsuite/gas/mips/org-10.s: New test source.
	* testsuite/gas/mips/org-11.s: New test source.
	* testsuite/gas/mips/org-12.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-03-01  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.

2017-02-28  Jan Beulich  <jbeulich@suse.com>

	* testsuite/gas/i386/x86-64-avx.s: Add suffixed variants of
	VPCMPESTR{I,M}.
	* testsuite/gas/i386/x86-64-sse2avx.s: Likewise.
	* testsuite/gas/i386/x86-64-sse4_2.s: Add suffixed variants
	of PCMPESTR{I,M}.
	* testsuite/gas/i386/ilp32/x86-64-avx-intel.d: Likewise.
	* testsuite/gas/i386/ilp32/x86-64-avx.d: Likewise.
	* testsuite/gas/i386/ilp32/x86-64-sse2avx.d: Likewise.
	* testsuite/gas/i386/ilp32/x86-64-sse4_2-intel.d: Likewise.
	* testsuite/gas/i386/ilp32/x86-64-sse4_2.d: Likewise.
	* testsuite/gas/i386/x86-64-avx-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-avx.d: Likewise.
	* testsuite/gas/i386/x86-64-sse2avx.d: Likewise.
	* testsuite/gas/i386/x86-64-sse4_2-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-sse4_2.d: Likewise.

2017-02-28  Alan Modra  <amodra@gmail.com>

	* config/tc-nios2.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.

2017-02-28  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
	(md_apply_fix): Remove fx_subsy check.  Move code converting to
	pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA.  Remove code
	emiiting errors on seeing fx_pcrel set on unexpected relocs, as
	that is done now by the generic code via..
	* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
	(TC_VALIDATE_FIX_SUB): Define.

2017-02-28  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/jalr4.s: Add `jalr $0, $25' instructions.
	* testsuite/gas/mips/jalr4.d: Adjust accordingly.  Remove MIPSr6
	encoding patterns.
	* testsuite/gas/mips/jalr4-n64.d: Likewise.
	* testsuite/gas/mips/mipsr6@jalr4.d: New test.
	* testsuite/gas/mips/mipsr6@jalr4-n32.d: New test.
	* testsuite/gas/mips/mipsr6@jalr4-n64.d: New test.

2017-02-25  Alan Modra  <amodra@gmail.com>

	* testsuite/gas/elf/strtab.s: Don't put directives on first
	column or continuation with labels not in first column.

2017-02-24  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum.
	* config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q
	to be used with SVE registers.
	(parse_operands): Handle new SVE operands.
	(aarch64_features): Make "sve" require F16 rather than FP.  Also
	require COMPNUM.
	* testsuite/gas/aarch64/sve.s: Add tests for new instructions.
	Include compnum tests.
	* testsuite/gas/aarch64/sve.d: Update accordingly.
	* testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions.
	* testsuite/gas/aarch64/sve-invalid.l: Update accordingly.  Also
	update expected output for new FMOV and MOV alternatives.

2017-02-24  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/c-aarch64.texi: Add a "compnum" entry.
	* config/tc-aarch64.c (aarch64_features): Likewise,
	* testsuite/gas/aarch64/advsimd-compnum.s: New test.
	* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.

2017-02-24  Jan Beulich  <jbeulich@suse.com>

	* testsuite/gas/i386/opcode.s: Add alternative TEST forms.
	* testsuite/gas/i386/x86-64-opcode.s: Likewise.
	* testsuite/gas/i386/opcode.d: Adjust accordingly.
	* testsuite/gas/i386/opcode-intel.d: Likewise.
	* testsuite/gas/i386/x86-64-opcode.d: Likewise.
	* testsuite/gas/i386/ilp32/x86-64-opcode.d: Likewise.

2017-02-24  Sheldon Lobo  <sheldon.lobo@oracle.com>

	Test cases for the architecture level aware SPARC ASI work.
	* gas/testsuite/gas/sparc/sparc.exp: 2 new tests
	* gas/testsuite/gas/sparc/asi-bump-warn.s: New test
	* gas/testsuite/gas/sparc/asi-bump-warn.l: Likewise
	* gas/testsuite/gas/sparc/asi-arch-error.s: Likewise
	* gas/testsuite/gas/sparc/asi-arch-error.l: Likewise

2017-02-23  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/jalr4.d: New test.
	* testsuite/gas/mips/jalr4-n32.d: New test.
	* testsuite/gas/mips/jalr4-n64.d: New test.
	* testsuite/gas/mips/jalr4.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-02-23  Sheldon Lobo <sheldon.lobo@oracle.com>

	Add support for associating SPARC ASIs with an architecture level.
	* config/tc-sparc.c (parse_sparc_asi): New encode SPARC ASIs.

2017-02-23  Jan Beulich  <jbeulich@suse.com>

	* testsuite/gas/all/err-sizeof.s: Don't use sums or differences
	of symbols as expression.

2017-02-23  Jan Beulich  <jbeulich@suse.com>

	* gas/testsuite/gas/i386/x86-64-mpx-inval-2.d: Add 32- and 16-
 	bit GPR forms of BNDCL, BNDCU, and BNDCN. Add RSP-as-index
	Intel syntax forms of BNDMK, BNDSTX, and BNDLDX.
	* gas/testsuite/gas/i386/x86-64-mpx-inval-2.l: Adjust.

2017-02-22  Maciej W. Rozycki  <macro@imgtec.com>

	* ecoff.c (ecoff_directive_end) [md_flush_pending_output]: Call
	`md_flush_pending_output'.
	* config/tc-mips.c (s_mips_end) [md_flush_pending_output]: Call
	`md_flush_pending_output' unconditionally.
	* testsuite/gas/mips/debug-label-end-1.d: New test.
	* testsuite/gas/mips/debug-label-end-2.d: New test.
	* testsuite/gas/mips/debug-label-end-3.d: New test.
	* testsuite/gas/mips/debug-label-end.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-02-22  Hans-Peter Nilsson  <hp@axis.com>

	* testsuite/gas/all/err-sizeof.s: Include cris*-*-* in the list of
	targets	yielding an error message matching "too complex".

2017-02-22  Nick Clifton  <nickc@redhat.com>

	* testsuite/gas/arm/vcmp-noprefix-imm.d: Skip for non-ELF targets.

2017-02-21  Jan Beulich  <jbeulich@suse.com>

	* expr.c (operand): Handle missing operand to .startof.() and
	.sizeof.().
	* testsuite/gas/all/err-sizeof.s: New.

2017-02-20  Alan Modra  <amodra@gmail.com>

	PR 21118
	* NEWS: Revise powerpc register check.
	* config/tc-ppc.c (ppc_optimize_expr, md_assemble): Make "invalid
	register expression" a warning.

2017-02-17  Maciej W. Rozycki  <macro@imgtec.com>

	* ecoff.c (ecoff_directive_ent, add_procedure): Handle `.aent'.
	* config/obj-ecoff.c (obj_pseudo_table): Add "aent" entry.
	* config/obj-elf.c (ecoff_debug_pseudo_table): Likewise.
	* testsuite/gas/mips/aent-2.d: New test.
	* testsuite/gas/mips/aent-mdebug.d: New test.
	* testsuite/gas/mips/aent-mdebug-2.d: New test.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-02-15  Richard Sandiford  <richard.sandiford@arm.com>

	* testsuite/gas/aarch64/sve-sysreg.s,
	testsuite/gas/aarch64/sve-sysreg.d,
	testsuite/gas/aarch64/sve-sysreg-invalid.d,
	testsuite/gas/aarch64/sve-sysreg-invalid.l: New tests.

2017-02-15  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/c-aarch64.texi: Fix sve entry.

2017-02-15  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/tc-arc.c (md_convert_frag): Remove @pcl relocation
	information from input expression.
	(assemble_insn): Make sure pcrel is correctly set.
	(arc_pcrel_adjust): Compensate for PCL rounding.
	* testsuite/gas/arc/relax-add01.d: New file.
	* testsuite/gas/arc/relax-add01.s: Likewise.
	* testsuite/gas/arc/relax-add02.d: Likewise.
	* testsuite/gas/arc/relax-add02.s: Likewise.
	* testsuite/gas/arc/relax-add03.d: Likewise.
	* testsuite/gas/arc/relax-add03.s: Likewise.
	* testsuite/gas/arc/relax-add04.d: Likewise.
	* testsuite/gas/arc/relax-add04.s: Likewise.
	* testsuite/gas/arc/relax-ld01.d: Likewise.
	* testsuite/gas/arc/relax-ld01.s: Likewise.
	* testsuite/gas/arc/relax-ld02.d: Likewise.
	* testsuite/gas/arc/relax-ld02.s: Likewise.
	* testsuite/gas/arc/relax-mov01.d: Likewise.
	* testsuite/gas/arc/relax-mov01.s: Likewise.
	* testsuite/gas/arc/relax-mov02.d: Likewise.
	* testsuite/gas/arc/relax-mov02.s: Likewise.
	* testsuite/gas/arc/relax-mpy01.d: Likewise.
	* testsuite/gas/arc/relax-mpy01.s: Likewise.
	* testsuite/gas/arc/relax-sub01.d: Likewise.
	* testsuite/gas/arc/relax-sub01.s: Likewise.
	* testsuite/gas/arc/relax-sub02.d: Likewise.
	* testsuite/gas/arc/relax-sub02.s: Likewise.
	* testsuite/gas/arc/relax-sub03.d: Likewise.
	* testsuite/gas/arc/relax-sub03.s: Likewise.
	* testsuite/gas/arc/relax-sub04.d: Likewise.
	* testsuite/gas/arc/relax-sub04.s: Likewise.

2017-02-09  Vineet Gupta <vgupta@synopsys.com>

	* testsuite/gas/arc/st.d: Update for 0xe having a name now

2017-02-14  Alan Modra  <amodra@gmail.com>

	PR 21118
	* NEWS: Mention powerpc register checks.
	* config/tc-ppc.c (struct pd_reg): Make value a short.  Add flags.
	(pre_defined_registers): Delete fpscr and pmr entries.  Set
	register type in flags.
	(cr_names): Set type in flags.
	(reg_name_search): Return pointer to struct pd_reg rather than value.
	(register_name): Adjust to suit.  Set X_md from flags.
	(ppc_parse_name): Likewise.
	(ppc_optimize_expr): New function.
	(md_assemble): Verify expresion reg flags match operand.
	* config/tc-ppc.h (md_optimize_expr): Define.
	(ppc_optimize_expr): Declare.

2017-02-14  Alan Modra  <amodra@gmail.com>

	* testsuite/gas/ppc/cell.s: Correct invalid registers.
	* testsuite/gas/ppc/vle-simple-1.s: Likewise.
	* testsuite/gas/ppc/vle-simple-2.s: Likewise.

2017-02-13  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (parse_ifimm_zero): Make prefix optional in unified
	syntax.
	* testsuite/gas/arm/vcmp-noprefix-imm.d: New file.
	* testsuite/gas/arm/vcmp-noprefix-imm.s: New file.

2017-02-10  Nicholas Piggin  <npiggin@gmail.com>

	* testsuite/gas/ppc/power9.d <scv, rfscv>: New tests.

2017-02-02  Maciej W. Rozycki  <macro@imgtec.com>

	* doc/as.texinfo (Overview): Select MIPS options for man page
	inclusion.

2017-01-30  Maciej W. Rozycki  <macro@imgtec.com>

	* config/tc-mips.c (mips_ignore_branch_isa): New variable.
	(options): Add OPTION_IGNORE_BRANCH_ISA and
	OPTION_NO_IGNORE_BRANCH_ISA enum values.
	(md_longopts): Add "mignore-branch-isa" and
	"mno-ignore-branch-isa" options.
	(md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and
	OPTION_NO_IGNORE_BRANCH_ISA.
	(fix_bad_cross_mode_branch_p): Return FALSE if
	`mips_ignore_branch_isa' has been set.
	(md_show_usage): Add `-mignore-branch-isa' and
	`-mno-ignore-branch-isa'.

	* doc/as.texinfo (Target MIPS options): Add
	`-mignore-branch-isa' and `-mno-ignore-branch-isa' options.
	(-mignore-branch-isa, -mno-ignore-branch-isa): New options.
	* doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and
	`-mno-ignore-branch-isa' options.

	* testsuite/gas/mips/branch-local-ignore-2.d: New test.
	* testsuite/gas/mips/branch-local-ignore-3.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n32-2.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n32-3.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n64-2.d: New test.
	* testsuite/gas/mips/branch-local-ignore-n64-3.d: New test.
	* testsuite/gas/mips/mips.exp: Run the new tests.

2017-01-30  Maciej W. Rozycki  <macro@imgtec.com>

	* testsuite/gas/mips/branch-local-2.d: New test.
	* testsuite/gas/mips/branch-local-3.d: New test.
	* testsuite/gas/mips/branch-local-n32-2.d: New test.
	* testsuite/gas/mips/branch-local-n32-3.d: New test.
	* testsuite/gas/mips/branch-local-n64-2.d: New test.
	* testsuite/gas/mips/branch-local-n64-3.d: New test.
	* testsuite/gas/mips/mips.exp: Fold corresponding list tests
	into the new tests.

2017-01-27  Alexis Deruell  <alexis.deruelle@gmail.com>

	PR 21056
	* testsuite/gas/tic6x/insns16-parallel.s: New test case.
	* testsuite/gas/tic6x/insns16-parallel.d: New test driver.

2017-01-25  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* configure.tgt (aarch64*-*-rtems*): Remove.
	(bfin-*-rtems*): Likewise.
	(h8300-*-rtems*): Likewise.
	(i386-*-rtems*): Likewise.
	(m32c-*-rtems*): Likewise.
	(m32r-*-rtems*): Likewise.
	(m68k-*-rtems*): Likewise.
	(mips-*-rtems*): Likewise.
	(nios2-*-rtems*): Likewise.
	(ppc-*-rtems*): Likewise.
	(sh-*-rtems*): Likewise.
	(sparc64-*-rtems*): Likewise.
	(sparc-*-rtems*): Likewise.
	(*-*-rtems*) Use ELF format.

2017-01-25  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* configure.tgt (arm-*-rtems*): Move to (arm-*-eabi*).

2017-01-25  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* configure.tgt (sh-*-rtemscoff*): Remove.

2017-01-24  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* configure.tgt (riscv*-*-*): Remove em=linux.

2017-01-23  Sebastian Rasmussen  <sebras@gmail.com>

	PR gas/21072
	* asintl.h: Fix spelling mistakes and typos.
	* atof-generic.c: Likewise.
	* bit_fix.h: Likewise.
	* config/atof-ieee.c: Likewise.
	* config/bfin-defs.h: Likewise.
	* config/bfin-parse.y: Likewise.
	* config/obj-coff-seh.h: Likewise.
	* config/obj-coff.c: Likewise.
	* config/obj-evax.c: Likewise.
	* config/obj-macho.c: Likewise.
	* config/rx-parse.y: Likewise.
	* config/tc-aarch64.c: Likewise.
	* config/tc-alpha.c: Likewise.
	* config/tc-arc.c: Likewise.
	* config/tc-arm.c: Likewise.
	* config/tc-avr.c: Likewise.
	* config/tc-bfin.c: Likewise.
	* config/tc-cr16.c: Likewise.
	* config/tc-cris.c: Likewise.
	* config/tc-crx.c: Likewise.
	* config/tc-d10v.c: Likewise.
	* config/tc-d30v.c: Likewise.
	* config/tc-dlx.c: Likewise.
	* config/tc-epiphany.c: Likewise.
	* config/tc-frv.c: Likewise.
	* config/tc-hppa.c: Likewise.
	* config/tc-i370.c: Likewise.
	* config/tc-i386-intel.c: Likewise.
	* config/tc-i386.c: Likewise.
	* config/tc-i960.c: Likewise.
	* config/tc-ia64.c: Likewise.
	* config/tc-m32r.c: Likewise.
	* config/tc-m68hc11.c: Likewise.
	* config/tc-m68k.c: Likewise.
	* config/tc-mcore.c: Likewise.
	* config/tc-mep.c: Likewise.
	* config/tc-mep.h: Likewise.
	* config/tc-metag.c: Likewise.
	* config/tc-microblaze.c: Likewise.
	* config/tc-mips.c: Likewise.
	* config/tc-mmix.c: Likewise.
	* config/tc-mn10200.c: Likewise.
	* config/tc-mn10300.c: Likewise.
	* config/tc-msp430.c: Likewise.
	* config/tc-msp430.h: Likewise.
	* config/tc-nds32.c: Likewise.
	* config/tc-nds32.h: Likewise.
	* config/tc-nios2.c: Likewise.
	* config/tc-nios2.h: Likewise.
	* config/tc-ns32k.c: Likewise.
	* config/tc-pdp11.c: Likewise.
	* config/tc-ppc.c: Likewise.
	* config/tc-pru.c: Likewise.
	* config/tc-rx.c: Likewise.
	* config/tc-s390.c: Likewise.
	* config/tc-score.c: Likewise.
	* config/tc-score7.c: Likewise.
	* config/tc-sh.c: Likewise.
	* config/tc-sh64.c: Likewise.
	* config/tc-sparc.c: Likewise.
	* config/tc-tic4x.c: Likewise.
	* config/tc-tic54x.c: Likewise.
	* config/tc-v850.c: Likewise.
	* config/tc-vax.c: Likewise.
	* config/tc-visium.c: Likewise.
	* config/tc-xgate.c: Likewise.
	* config/tc-xtensa.c: Likewise.
	* config/tc-z80.c: Likewise.
	* config/tc-z8k.c: Likewise.
	* config/te-vms.c: Likewise.
	* config/xtensa-relax.c: Likewise.
	* doc/as.texinfo: Likewise.
	* doc/c-arm.texi: Likewise.
	* doc/c-hppa.texi: Likewise.
	* doc/c-i370.texi: Likewise.
	* doc/c-i386.texi: Likewise.
	* doc/c-m32r.texi: Likewise.
	* doc/c-m68k.texi: Likewise.
	* doc/c-mmix.texi: Likewise.
	* doc/c-msp430.texi: Likewise.
	* doc/c-nds32.texi: Likewise.
	* doc/c-ns32k.texi: Likewise.
	* doc/c-riscv.texi: Likewise.
	* doc/c-rx.texi: Likewise.
	* doc/c-s390.texi: Likewise.
	* doc/c-tic6x.texi: Likewise.
	* doc/c-tilegx.texi: Likewise.
	* doc/c-tilepro.texi: Likewise.
	* doc/c-v850.texi: Likewise.
	* doc/c-xgate.texi: Likewise.
	* doc/c-xtensa.texi: Likewise.
	* dwarf2dbg.c: Likewise.
	* ecoff.c: Likewise.
	* itbl-ops.c: Likewise.
	* listing.c: Likewise.
	* macro.c: Likewise.
	* po/gas.pot: Likewise.
	* read.c: Likewise.
	* struc-symbol.h: Likewise.
	* symbols.h: Likewise.
	* testsuite/gas/arc/relocs-errors.err: Likewise.
	* write.c: Likewise.

2017-01-23  Nick Clifton  <nickc@redhat.com>

	* po/sv.po: Updated Swedish translation.

2017-01-20  Nick Clifton  <nickc@redhat.com>

	* config/tc-i386.c (parse_operands): Check for operand overflow
	before setting the unspecified bit.

2017-01-18  Maciej W. Rozycki  <macro@imgtec.com>

	PR gas/20649
	* config/tc-mips.c (pic_need_relax): Don't check for linkonce
	symbols, remove the `segtype' parameter.
	(mips_frob_file, md_estimate_size_before_relax): Adjust
	accordingly.
	(s_is_linkonce): Add an explanatory comment.
	* testsuite/gas/mips/comdat-reloc.d: New test.
	* testsuite/gas/mips/comdat-reloc.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new test.

2017-01-18  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* testsuite/gas/arm/armv8_3-a-simd.s: Add vcmla tests.
	* testsuite/gas/arm/armv8_3-a-simd.d: Update.

2017-01-18  Bernhard Rosenkranzer  <bero@lindev.ch>

	PR 21059
	* config/bfin-lex.l: Support processing with flex 2.6.3.
	* itbl-lex.l: Likewise.

2017-01-18  Nathan Sidwell  <nathan@acm.org>

	* as.h (gas_assert): Use abort.
	(as_assert): Remove.
	(signal_init): Declare.
	* as.c (main): Call signal_init.
	* messages.c: #include <signal.h>
	(as_assert): Delete.
	(as_abort): Allow NULL FILE.
	(signal_crash): New.
	(signal_init): Register fatal signal handlers.
	* configure.ac: Check for strsignal.
	* config.in: Rebuilt.
	* configure: Rebuilt.

2017-01-17  Nick Clifton  <nickc@redhat.com>

	* po/sv.po: Updated Swedish translation.

2017-01-12  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* config/tc-i386.c (cpu_arch): Add .avx512_vpopcntdq.
	(cpu_noarch): Add noavx512_vpopcntdq.
	* doc/c-i386.texi: Document avx512_vpopcntdq, noavx512_vpopcntdq.
	* testsuite/gas/i386/i386.exp: Run AVX512_VPOPCNTDQ tests.
	* testsuite/gas/i386/avx512_vpopcntdqd-intel.d: New file.
	* testsuite/gas/i386/avx512_vpopcntdqd.d: Ditto.
	* testsuite/gas/i386/avx512_vpopcntdqd.s: Ditto.
	* testsuite/gas/i386/x86-64-avx512_vpopcntdqd-intel.d: Ditto.
	* testsuite/gas/i386/x86-64-avx512_vpopcntdqd.d: Ditto.
	* testsuite/gas/i386/x86-64-avx512_vpopcntdqd.s: Ditto.

2017-01-12  Nick Clifton  <nickc@redhat.com>

	* read.c (temp_ilp): New function.  Installs a temporary input
	line pointer.
	(restore_ilp): New function.  Restores the original input line
	pointer.
	* read.h (temp_ilp): Prototype.
	(restore_ilp): Prototype.
	* stabs.c (dot_func_p): Use bfd_boolean type.
	(generate_asm_file): Use temp_ilp and restore_ilp.
	(stabs_generate_asm_lineno): Likewise.
	(stabs_generate_asm_endfunc): Likewise.

2017-01-11  Jeremy Soller  <jackpot51@gmail.com>

	* configure.tgt: Add entry for i386-redox.

2017-01-10  Nick Clifton  <nickc@redhat.com>

	* po/sv.po: Updated Swedish translation.

2017-01-10  Tristan Gingold  <gingold@adacore.com>

	* testsuite/gas/all/sleb128-8.d: Adjust test.
	* testsuite/gas/all/gas.exp (test_cond): Likewise.

2017-01-10  Tristan Gingold  <gingold@adacore.com>

	* read.c (emit_leb128_expr): Extended unsigned big number for
	sleb128.
	* testsuite/gas/all/gas.exp (test_cond): Add sleb128-8 test.
	* testsuite/gas/all/sleb128.d: New test.
	* testsuite/gas/all/sleb128.s: New test source.

2017-01-09  Andrew Waterman <andrew@sifive.com>

	* config/tc-riscv.c (append_insn): Don't eagerly apply relocations
	against constants.
	(md_apply_fix): Mark relocations against constants as "done."

2017-01-09  Andrew Waterman <andrew@sifive.com>

	* config/tc-riscv.c (append_insn): Don't eagerly apply relocations
	against constants.
	(md_apply_fix): Mark relocations against constants as "done."

2017-01-09  Palmer Dabbelt <palmer@dabbelt.com>
	    Kito Cheng <kito.cheng@gmail.com>

	* emulparams/elf32lriscv-defs.sh (INITIAL_READONLY_SECTIONS):
	Removed.
	(SDATA_START_SYMBOLS): Likewise.

2017-01-09  Nick Clifton  <nickc@redhat.com>

	* po/sv.po: New Swedish translation.
	* configure.ac (ALL_LINGUAS): Add sv.
	* configure: Regenerate.

2017-01-09  Andrew Waterman <andrew@sifive.com>

	* config/tc-riscv.c (relaxed_branch_length): Use the long
	sequence when the target is a weak symbol.

2017-01-04  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/tc-aarch64.c (aarch64_features): Add rcpc.
	* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.
	* testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Rename to ...
	* testsuite/gas/aarch64/ldst-rcpc.d: This.
	* testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Rename to ...
	* testsuite/gas/aarch64/ldst-rcpc.s: This.
	* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: New test.

2017-01-04  Norm Jacobs  <norm.jacobs@oracle.com>

	PR gas/20992
	* configure.tgt: Treat sparcv9 as sparc64.

2017-01-03  Kito Cheng  <kito.cheng@gmail.com>

	* config/tc-riscv.c (riscv_set_arch): Whitelist the "q" ISA
	extension.
	(riscv_after_parse_args): Set FLOAT_ABI_QUAD when the Q ISA is
	enabled and no other ABI is specified.

2017-01-03  Dimitar Dimitrov  <dimitar@dinux.eu>

	* config/tc-pru.c (md_number_to_chars): Fix parameter to be
	valueT, as declared in tc.h.
	(md_apply_fix): Fix to work on 32-bit hosts.

2017-01-02  Alan Modra  <amodra@gmail.com>

	Update year range in copyright notice of all files.

For older changes see ChangeLog-2016

Copyright (C) 2017 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: