path: root/gas/ChangeLog

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (reg_needs_delay): Move later in file.
	Use gpr_write_mask.
	(insns_between): Use gpr_read_mask instead of EXTRACT_OPERAND.

2013-07-26  Sergey Guriev  <sergey.s.guriev@intel.com>
	    Alexander Ivchenko  <alexander.ivchenko@intel.com>
	    Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
	    Sergey Lega  <sergey.s.lega@intel.com>
	    Anna Tikhonova  <anna.tikhonova@intel.com>
	    Ilya Tocar  <ilya.tocar@intel.com>
	    Andrey Turetskiy  <andrey.turetskiy@intel.com>
	    Ilya Verbin  <ilya.verbin@intel.com>
	    Kirill Yukhin  <kirill.yukhin@intel.com>
	    Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

	* config/tc-i386-intel.c (O_zmmword_ptr): New.
	(i386_types): Add zmmword.
	(i386_intel_simplify_register): Allow regzmm.
	(i386_intel_simplify): Handle zmmwords.
	(i386_intel_operand): Handle RC/SAE, vector operations and
	zmmwords.
	* config/tc-i386.c (ZMMWORD_MNEM_SUFFIX): New.
	(struct RC_Operation): New.
	(struct Mask_Operation): New.
	(struct Broadcast_Operation): New.
	(vex_prefix): Size of bytes increased to 4 to support EVEX
	encoding.
	(enum i386_error): Add new error codes: unsupported_broadcast,
	broadcast_not_on_src_operand, broadcast_needed,
	unsupported_masking, mask_not_on_destination, no_default_mask,
	unsupported_rc_sae, rc_sae_operand_not_last_imm,
	invalid_register_operand, try_vector_disp8.
	(struct _i386_insn): Add new fields vrex, need_vrex, mask,
	rounding, broadcast, memshift.
	(struct RC_name): New.
	(RC_NamesTable): New.
	(evexlig): New.
	(evexwig): New.
	(extra_symbol_chars): Add '{'.
	(cpu_arch): Add AVX512F, AVX512CD, AVX512ER and AVX512PF.
	(i386_operand_type): Add regzmm, regmask and vec_disp8.
	(match_mem_size): Handle zmmwords.
	(operand_type_match): Handle zmm-registers.
	(mode_from_disp_size): Handle vec_disp8.
	(fits_in_vec_disp8): New.
	(md_begin): Handle {} properly.
	(type_names): Add "rZMM", "Mask reg" and "Vector d8".
	(build_vex_prefix): Handle vrex.
	(build_evex_prefix): New.
	(process_immext): Adjust to properly handle EVEX.
	(md_assemble): Add EVEX encoding support.
	(swap_2_operands): Correctly handle operands with masking,
	broadcasting or RC/SAE.
	(check_VecOperands): Support EVEX features.
	(VEX_check_operands): Properly handle 16 upper [xyz]mm registers.
	(match_template): Support regzmm and handle new error codes.
	(process_suffix): Handle zmmwords and zmm-registers.
	(check_byte_reg): Extend to zmm-registers.
	(process_operands): Extend to zmm-registers.
	(build_modrm_byte): Handle EVEX.
	(output_insn): Adjust to properly handle EVEX case.
	(disp_size): Handle vec_disp8.
	(output_disp): Support compressed disp8*N evex feature.
	(output_imm): Handle RC/SAE immediates properly.
	(check_VecOperations): New.
	(i386_immediate): Handle EVEX features.
	(i386_index_check): Handle zmmwords and zmm-registers.
	(RC_SAE_immediate): New.
	(i386_att_operand): Handle EVEX features.
	(parse_real_register): Add a check for ZMM/Mask registers.
	(OPTION_MEVEXLIG): New.
	(OPTION_MEVEXWIG): New.
	(md_longopts): Add mevexlig and mevexwig.
	(md_parse_option): Handle mevexlig and mevexwig options.
	(md_show_usage): Add description for mevexlig and mevexwig.
	* doc/c-i386.texi: Document avx512f/.avx512f, avx512cd/.avx512cd,
	avx512er/.avx512er, avx512pf/.avx512pf, mevexlig and mevexwig.

2013-07-25  Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

	* config/tc-i386.c (cpu_arch): Add .sha.
	* doc/c-i386.texi: Document sha/.sha.

2013-07-24  Anna Tikhonova  <anna.tikhonova@intel.com>
	    Kirill Yukhin  <kirill.yukhin@intel.com>
	    Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

	* config/tc-i386.c (BND_PREFIX): New.
	(struct _i386_insn): Add new field bnd_prefix.
	(add_bnd_prefix): New.
	(cpu_arch): Add MPX.
	(i386_operand_type): Add regbnd.
	(md_assemble): Handle BND prefixes.
	(parse_insn): Likewise.
	(output_branch): Likewise.
	(output_jump): Likewise.
	(build_modrm_byte): Handle regbnd.
	(OPTION_MADD_BND_PREFIX): New.
	(md_longopts): Add entry for 'madd-bnd-prefix'.
	(md_parse_option): Handle madd-bnd-prefix option.
	(md_show_usage): Add description for madd-bnd-prefix
	option.
	* doc/c-i386.texi: Document mpx/.mpx and -madd-bnd-prefix.

2013-07-24  Tristan Gingold  <gingold@adacore.com>

	* config/tc-ppc.c (md_apply_fix): Adjust BFD_RELOC_PPC_B16 on
	xcoff targets.

2013-07-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* config/tc-s390.c (s390_machine): Don't force the .machine
	argument to lower case.

2013-07-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/tc-arm.c (s_arm_arch_extension): Improve error message
	for invalid extension.

2013-07-19  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (enum aarch64_abi_type): New enumeration tag.
	(AARCH64_ABI_LP64, AARCH64_ABI_ILP32): New enumerators.
	(aarch64_abi): New variable.
	(ilp32_p): Change to be a macro.
	(aarch64_opts): Remove the support for option -milp32 and -mlp64.
	(struct aarch64_option_abi_value_table): New struct.
	(aarch64_abis): New table.
	(aarch64_parse_abi): New function.
	(aarch64_long_opts): Add entry for -mabi=.
	* doc/as.texinfo (Target AArch64 options): Document -mabi.
	* doc/c-aarch64.texi: Likewise.

2013-07-18  Jim Thomas  <thomas@cfht.hawaii.edu>

	* config/tc-i386-intel.c (i386_intel_operand): Fixed signed vs
	unsigned comparison.

2013-07-18  Sandeep Kumar Singh  <Sandeep.Singh2@kpitcummins.com>

        * config/rx-defs.h: Add macros for RX100, RX200, RX600, and
	RX610.
        * config/rx-parse.y: (rx_check_float_support): Add function to
	check floating point operation support for target RX100 and
	RX200.
        * config/tc-rx.c: Add CPU options RX100, RX200, RX600, and RX610.
        * doc/c-rx.texi: Add -mcpu option to recognize macros for RX100,
        RX200, RX600, and RX610

2013-07-18  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>

	* config/tc-avr.c (md_show_usage): Add avrxmega2 to help text

2013-07-18  Vishnu K.S  <vishnu.k_s@atmel.com>

	* config/tc-avr.c: Make ata6289's ISA to AVR_ISA_AVR4.
	* doc/c-avr.texi: Likewise.

2013-07-15  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (match_save_restore_list_operand): Avoid -Wformat
	error with older GCCs.
	(mips16_macro_build): Dereference args.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_prefer_vec_regno, mips_parse_register):
	New functions, split out from...
	(reg_lookup): ...here.  Remove itbl support.
	(reglist_lookup): Delete.
	(mips_operand_token_type): New enum.
	(mips_operand_token): New structure.
	(mips_operand_tokens): New variable.
	(mips_add_token, mips_parse_base_start, mips_parse_argument_token)
	(mips_parse_arguments): New functions.
	(md_begin): Initialize mips_operand_tokens.
	(mips_arg_info): Add a token field.  Remove optional_reg field.
	(match_char, match_expression): New functions.
	(match_const_int): Use match_expression.  Remove "s" argument
	and return a boolean result.  Remove O_register handling.
	(match_regno, match_reg, match_reg_range): New functions.
	(match_int_operand, match_mapped_int_operand, match_msb_operand)
	(match_reg_operand, match_reg_pair_operand, match_perf_reg_operand)
	(match_addiusp_operand, match_clo_clz_dest_operand)
	(match_lwm_swm_list_operand, match_entry_exit_operand)
	(match_save_restore_list_operand, match_mdmx_imm_reg_operand)
	(match_tied_reg_operand): Remove "s" argument and return a boolean
	result.  Match tokens rather than text.  Update calls to
	match_const_int.  Rely on match_regno to call check_regno.
	(match_pcrel_operand, match_pc_operand): Replace "s" argument with
	"arg" argument.  Return a boolean result.
	(parse_float_constant): Replace with...
	(match_float_constant): ...this new function.
	(match_operand): Remove "s" argument and return a boolean result.
	Update calls to subfunctions.
	(mips_ip, mips16_ip): Call mips_parse_arguments.  Use match routines
	rather than string-parsing routines.  Update handling of optional
	registers for token scheme.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (parse_float_constant): Split out from...
	(mips_ip): ...here.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (INSERT_BITS, INSERT_OPERAND, MIPS16_INSERT_OPERAND):
	Delete.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips32_to_16_reg_map): Delete.
	(match_entry_exit_operand): New function.
	(match_save_restore_list_operand): Likewise.
	(match_operand): Use them.
	(check_absolute_expr): Delete.
	(mips16_ip): Rewrite main parsing loop to use mips_operands.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c: Enable functions commented out in previous patch.
	(SKIP_SPACE_TABS): Move further up file.
	(mips32_to_micromips_reg_b_map, mips32_to_micromips_reg_c_map)
	(mips32_to_micromips_reg_d_map, mips32_to_micromips_reg_e_map)
	(ips32_to_micromips_reg_f_map, mips32_to_micromips_reg_g_map)
	(mips32_to_micromips_reg_l_map, mips32_to_micromips_reg_m_map)
	(mips32_to_micromips_reg_q_map, mips32_to_micromips_reg_n_map)
	(micromips_imm_b_map, micromips_imm_c_map): Delete.
	(mips_lookup_reg_pair): Delete.
	(macro): Use report_bad_range and report_bad_field.
	(mips_immed, expr_const_in_range): Delete.
	(mips_ip): Rewrite main parsing loop to use new functions.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_oddfpreg_ok): Move further up file.
	Change return type to bfd_boolean.
	(report_bad_range, report_bad_field): New functions.
	(mips_arg_info): New structure.
	(match_const_int, convert_reg_type, check_regno, match_int_operand)
	(match_mapped_int_operand, match_msb_operand, match_reg_operand)
	(match_reg_pair_operand, match_pcrel_operand, match_perf_reg_operand)
	(match_addiusp_operand, match_clo_clz_dest_operand)
	(match_lwm_swm_list_operand, match_mdmx_imm_reg_operand)
	(match_pc_operand, match_tied_reg_operand, match_operand)
	(check_completed_insn): New functions, commented out for now.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (insn_insert_operand): New function.
	(macro_build, mips16_macro_build): Put null character check
	in the for loop and convert continues to breaks.  Use operand
	structures to handle constant operands.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (validate_mips_insn): Move further up file.
	Add insn_bits and decode_operand arguments.  Use the mips_operand
	fields to work out which bits an operand occupies.  Detect double
	definitions.
	(validate_micromips_insn): Move further up file.  Call into
	validate_mips_insn.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips16_macro_build): Remove 'Y' case.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (macro_build): Take an int for "C", "k", "\\"
	and "~".
	(macro): Update accordingly.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (imm_expr, imm2_expr, offset_expr): Tweak commentary.
	(imm_reloc): Delete.
	(md_assemble): Remove imm_reloc handling.
	(mips_ip): Update commentary.  Use offset_expr and offset_reloc
	rather than imm_expr and imm_reloc for 'i', 'j' and 'u'.
	Use a temporary array rather than imm_reloc when parsing
	constant expressions.  Remove imm_reloc initialization.
	(mips16_ip): Update commentary.  Use offset_expr and offset_reloc
	for the relaxable field.  Use a relax_char variable to track the
	type of this field.  Remove imm_reloc initialization.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips16_ip): Handle "I".

2013-07-12  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (mips_flag_nan2008): New variable.
	(options): Add OPTION_NAN enum value.
	(md_longopts): Handle it.
	(md_parse_option): Likewise.
	(s_nan): New function.
	(mips_elf_final_processing): Handle EF_MIPS_NAN2008.
	(md_show_usage): Add -mnan.

	* doc/as.texinfo (Overview): Add -mnan.
	* doc/c-mips.texi (MIPS Opts): Document -mnan.
	(MIPS NaN Encodings): New node.  Document .nan directive.
	(MIPS-Dependent): List the new node.

2013-07-09  Tristan Gingold  <gingold@adacore.com>

	* configure.com: Define HAVE_SYS_TYPES_H and HAVE_UNISTD_H

2013-07-08  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_ip): Unconditionally parse an expression
	for 'A' and assume that the constant has been elided if the result
	is an O_register.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (gprel16_reloc_p): New function.
	(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
	BFD_RELOC_UNUSED.
	(offset_high_part, small_offset_p): New functions.
	(nacro): Use them.  Remove *_OB and *_DOB cases.  For single-
	register load and store macros, handle the 16-bit offset case first.
	If a 16-bit offset is not suitable for the instruction we're
	generating, load it into the temporary register using
	ADDRESS_ADDI_INSN.  Make the M_LI_DD code fall through into the
	M_L_DAB code once the address has been constructed.  For double load
	and store macros, again handle the 16-bit offset case first.
	If the second register cannot be accessed from the same high
	part as the first, load it into AT using ADDRESS_ADDI_INSN.
	Fix the handling of LD in cases where the first register is the
	same as the base.  Also handle the case where the offset is
	not 16 bits and the second register cannot be accessed from the
	same high part as the first.  For unaligned loads and stores,
	fuse the offbits == 12 and old "ab" handling.  Apply this handling
	whenever the second offset needs a different high part from the first.
	Construct the offset using ADDRESS_ADDI_INSN where possible,
	for offbits == 16 as well as offbits == 12.  Use offset_reloc
	when constructing the individual loads and stores.
	(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
	and offset_reloc before matching against a particular opcode.
	Handle elided 'A' constants.  Allow 'A' constants to use
	relocation operators.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
	(mips_ip): Likewise.  Do not set is_mdmx for INSN_5400 instructions.
	Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
	Require the msb to be <= 31 for "+s".  Check that the size is <= 31
	for both "+s" and "+S".

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
	(mips_ip, mips16_ip): Handle "+i".

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
	(micromips_to_32_reg_h_map): Rename to...
	(micromips_to_32_reg_h_map1): ...this.
	(micromips_to_32_reg_i_map): Rename to...
	(micromips_to_32_reg_h_map2): ...this.
	(mips_lookup_reg_pair): New function.
	(gpr_write_mask, macro): Adjust after above renaming.
	(validate_micromips_insn): Remove "mi" handling.
	(mips_ip): Likewise.  Parse both registers in a pair for "mh".

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
	(mips_ip): Remove "+D" and "+T" handling.

2013-07-05  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
	relocs.

2013-07-03  Marcus Shawcroft  <marcus.shawcroft@arm.com>

	* config/tc-aarch64.c (reloc_table): Merge got_prel19 into got.

2013-07-02  Marcus Shawcroft  <marcus.shawcroft@arm.com>

	* config/tc-aarch64.c (md_apply_fix): Reorder case values.
	(aarch64_force_relocation): Likewise.

2013-07-02  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.

2013-06-26  Maciej W. Rozycki  <macro@codesourcery.com>

	* doc/as.texinfo (Overview): Remove @samp from MIPS ISA names.
	* doc/c-mips.texi (MIPS Options): Remove @sc from MIPS ISA names.
	Replace @sc{mips16} with literal `MIPS16'.
	(MIPS ISA): Replace @sc{mips3} with literal `MIPS III'.

2013-06-26  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (reloc_table): Replace
	BFD_RELOC_AARCH64_LD64_GOT_LO12_NC with
	BFD_RELOC_AARCH64_LD_GOT_LO12_NC; likewise to
	BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC and
	BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC.
	(md_apply_fix): Handle BFD_RELOC_AARCH64_LD_GOT_LO12_NC,
	BFD_RELOC_AARCH64_LD32_GOT_LO12_NC,
	BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC,
	BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC,
	BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC and
	BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC.
	(aarch64_force_relocation): Likewise.

2013-06-26  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (ilp32_p): New static variable.
	(elf64_aarch64_target_format): Return the target according to the
	value of 'ilp32_p'.
	(md_begin): Determine 'mach' according to the value of 'ilp32_p'.
	(aarch64_opts): Add support for options '-milp32' and '-mlp64'.
	(aarch64_dwarf2_addr_size): New function.
	* config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
	(DWARF2_ADDR_SIZE): New define.

2013-06-26  Richard Sandiford  <rdsandiford@googlemail.com>

	* doc/c-mips.texi: Use ISA instead of @sc{isa}.

2013-06-26  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.

2013-06-25  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (mips_set_options): Add insn32 member.
	(mips_opts): Initialize it.
	(NOP_INSN, NOP_INSN_SIZE): Handle insn32 mode.
	(options): Add OPTION_INSN32 and OPTION_NO_INSN32 enum values.
	(md_longopts): Add "minsn32" and "mno-insn32" options.
	(is_size_valid): Handle insn32 mode.
	(md_assemble): Pass instruction string down to macro.
	(brk_fmt): Add second dimension and insn32 mode initializers.
	(mfhl_fmt): Likewise.
	(BRK_FMT, MFHL_FMT): Handle insn32 mode.
	(macro_build) <'c'>: Handle microMIPS 32-bit BREAK encoding.
	(macro_build_jalr, move_register): Handle insn32 mode.
	(macro_build_branch_rs): Likewise.
	(macro): Handle insn32 mode.
	<M_JRADDIUSP>, <M_JRC>, <M_MOVEP>: New cases.
	(mips_ip): Handle insn32 mode.
	(md_parse_option): Handle OPTION_INSN32 and OPTION_NO_INSN32.
	(s_mipsset): Handle "insn32" and "noinsn32" pseudo-ops.
	(mips_handle_align): Handle insn32 mode.
	(md_show_usage): Add -minsn32 and -mno-insn32.

	* doc/as.texinfo (Target MIPS options): Add -minsn32 and
	-mno-insn32 options.
	(-minsn32, -mno-insn32): New options.
	* doc/c-mips.texi (MIPS Opts): Add -minsn32 and -mno-insn32
	options.
	(MIPS assembly options): New node.  Document .set insn32 and
	.set noinsn32.
	(MIPS-Dependent): List the new node.

2013-06-25  Nick Clifton  <nickc@redhat.com>

	* config/tc-msp430.c (msp430_srcoperand): Do not allow the use of
	the PC in indirect addressing on 430xv2 parts.
	(msp430_operands): Add version test to hardware bug encoding
	restrictions.

2013-06-24  Roland McGrath  <mcgrathr@google.com>

	* config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
	so it skips whitespace before it.
	(s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.

	* config/tc-arm.c (arm_symbol_chars): Include '{' and '}'.
	(arm_reg_parse_multi): Skip whitespace first.
	(parse_reg_list): Likewise.
	(parse_vfp_reg_list): Likewise.
	(s_arm_unwind_save_mmxwcg): Likewise.

2013-06-24  Nick Clifton  <nickc@redhat.com>

	PR gas/15623
	* config/tc-arm.c (do_t_smc): Mark as ending an IT block.

2013-06-23  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_ip): Fix swapped bit numbers in comments.

2013-06-23  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c: Assert that offsetT and valueT are at least
	8 bytes in size.
	(GPR_SMIN, GPR_SMAX): New macros.
	(macro, mips_ip): Remove code for 4-byte valueT and offsetT.

2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c: Remove OBJ_ELF, OBJ_MAYBE_ELF and IS_ELF
	conditions.  Remove any code deselected by them.
	(s_mips_frame, s_mips_mask): Handle ECOFF_DEBUGGING case first.

2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>

	* NEWS: Note removal of ECOFF support.
	* doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
	* Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
	(MULTI_CFILES): Remove config/e-mipsecoff.c.
	* Makefile.in: Regenerate.
	* configure.in: Remove MIPS ECOFF references.
	(mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
	Delete cases.
	(mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
	(mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
	(mips-*-*): ...this single case.
	(mipsbecoff, mipslecoff, mipsecoff): Remove emulations.  Expect
	MIPS emulations to be e-mipself*.
	* configure: Regenerate.
	* configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
	(mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
	(mips-*-sysv*): Remove coff and ecoff cases.
	* as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
	* ecoff.c: Remove reference to MIPS ECOFF.
	* config/e-mipsecoff.c, config/te-lnews.h: Delete files.
	* config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
	(RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
	(mips_hi_fixup): Tweak comment.
	(append_insn): Require a howto.
	(mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.

2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>

	* doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
	Use "CPU" instead of "cpu".
	* doc/c-mips.texi: Likewise.
	(MIPS Opts): Rename to MIPS Options.
	(MIPS option stack): Rename to MIPS Option Stack.
	(MIPS ASE instruction generation overrides): Rename to
	MIPS ASE Instruction Generation Overrides (for now).
	(MIPS floating-point): Rename to MIPS Floating-Point.

2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>

	* doc/c-mips.texi (MIPS Macros): New section.
	(MIPS Object): Replace with...
	(MIPS Small Data): ...this new section.

2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>

	* doc/c-mips.texi (MIPS symbol sizes): Move section further up file.
	Capitalize name.  Use @kindex instead of @cindex for .set entries.

2013-06-22  Richard Sandiford  <rdsandiford@googlemail.com>

	* doc/c-mips.texi (MIPS Stabs): Remove section.

2013-06-20  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
	(ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
	(ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
	(ISA_SUPPORTS_VIRT64_ASE): Delete.
	(mips_ase): New structure.
	(mips_ases): New table.
	(FP64_ASES): New macro.
	(mips_ase_groups): New array.
	(mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
	(mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
	functions.
	(is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
	(md_parse_option): Use mips_ases and mips_set_ase instead of
	separate case statements for each ASE option.
	(mips_after_parse_args): Use FP64_ASES.  Use
	mips_check_isa_supports_ases to check the ASEs against
	other options.
	(s_mipsset): Use mips_ases and mips_set_ase instead of
	separate if statements for each ASE option.  Use
	mips_check_isa_supports_ases, even when a non-ASE option
	is specified.

2013-06-19  Greta Yorsh  <Greta.Yorsh@arm.com>

	* config/tc-arm.c (arm_cpus): Add support for Cortex-A12.

2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (md_shortopts, options, md_longopts)
	(md_longopts_size): Move earlier in file.

2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_set_options): Replace separate "ase_*" fields
	with a single "ase" bitmask.
	(mips_opts): Update accordingly.
	(file_ase, file_ase_explicit): New variables.
	(file_ase_mips3d, file_ase_mdmx, file_ase_smartmips, file_ase_dsp)
	(file_ase_dspr2, file_ase_eva, file_ase_mt, file_ase_virt): Delete.
	(ISA_HAS_ROR): Adjust for mips_set_options change.
	(is_opcode_valid): Take the base ase mask directly from mips_opts.
	(mips_ip): Adjust for mips_set_options change.
	(md_parse_option): Likewise.  Update file_ase_explicit.
	(mips_after_parse_args): Adjust for mips_set_options change.
	Use bitmask operations to select the default ASEs.  Set file_ase
	rather than individual per-ASE variables.
	(s_mipsset): Adjust for mips_set_options change.
	(mips_elf_final_processing): Test file_ase rather than
	file_ase_mdmx.  Remove commented-out code.

2013-06-18  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_cpu_info): Add an "ase" field.
	(MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP, MIPS_CPU_ASE_MT)
	(MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX, MIPS_CPU_ASE_DSPR2)
	(MIPS_CPU_ASE_MCU, MIPS_CPU_ASE_VIRT, MIPS_CPU_ASE_EVA): Delete.
	(mips_after_parse_args): Use the new "ase" field to choose
	the default ASEs.
	(mips_cpu_info_table): Move ASEs from the "flags" field to the
	"ase" field.

2013-06-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/tc-arm.c (symbol_preemptible): New function.
	(relax_branch): Use it.

2013-06-17  Catherine Moore  <clm@codesourcery.com>
	    Maciej W. Rozycki  <macro@codesourcery.com>
	    Chao-Ying Fu  <fu@mips.com>

	* config/tc-mips.c (mips_set_options): Add ase_eva.
	(mips_set_options mips_opts): Add ase_eva.
	(file_ase_eva): Declare.
	(ISA_SUPPORTS_EVA_ASE): Define.
	(IS_SEXT_9BIT_NUM): Define.
	(MIPS_CPU_ASE_EVA): Define.
	(is_opcode_valid): Add support for ase_eva.
	(macro_build): Likewise.
	(macro): Likewise.
	(validate_mips_insn): Likewise.
	(validate_micromips_insn): Likewise.
	(mips_ip): Likewise.
	(options): Add OPTION_EVA and OPTION_NO_EVA.
	(md_longopts): Add -meva and -mno-eva.
	(md_parse_option): Process new options.
	(mips_after_parse_args): Check for valid EVA combinations.
	(s_mipsset): Likewise.

2013-06-14  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>

	* dwarf2dbg.h (dwarf2_move_insn): Declare.
	* dwarf2dbg.c (line_subseg): Add pmove_tail.
	(get_line_subseg): Add create_p argument.  Initialize pmove_tail.
	(dwarf2_gen_line_info_1): Update call accordingly.
	(dwarf2_move_insn): New function.
	* config/tc-mips.c (append_insn): Use dwarf2_move_insn.

2013-06-14  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>

	Revert:

	2011-09-05  Richard Sandiford  <rdsandiford@googlemail.com>

	PR gas/13024
	* dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
	(dwarf2_gen_line_info_1): Delete.
	(dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
	(dwarf2_gen_line_info, dwarf2_emit_label): Use them.
	(dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
	(dwarf2_directive_loc): Push previous .locs instead of generating
	them immediately.

2013-06-13  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* config/tc-mips.c (ISA_SUPPORTS_VIRT_ASE): Support micromips.
	(ISA_SUPPORTS_VIRT64_ASE): Support 64-bit micromips.

2013-06-13  Nick Clifton  <nickc@redhat.com>

	PR gas/15602
	* config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
	* config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
	function.  Generates an error if the adjusted offset is out of a
	16-bit range.

2013-06-12  Sandra Loosemore  <sandra@codesourcery.com>

	* config/tc-nios2.c (md_apply_fix):  Mask constant
	BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.

2013-06-10  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (append_insn): Don't do branch relaxation for
	MIPS-3D instructions either.
	(md_convert_frag): Update the COPx branch mask accordingly.

	* config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
	option.
	* doc/as.texinfo (Overview): Add --relax-branch and
	--no-relax-branch.
	* doc/c-mips.texi (MIPS Opts): Document --relax-branch and
	--no-relax-branch.

2013-06-09  Sandra Loosemore  <sandra@codesourcery.com>

	* config/tc-nios2.c (nios2_parse_args):  Allow trap argument to
	omitted.

2013-06-08  Catherine Moore  <clm@codesourcery.com>

	* config/tc-mips.c (is_opcode_valid):  Build ASE mask.
	(is_opcode_valid_16): Pass ase value to opcode_is_member.
	(append_insn): Change INSN_xxxx to ASE_xxxx.

2013-06-01  George Thomas <george.thomas@atmel.com>

        * gas/config/tc-avr.c: Change ISA for devices with USB support to
	AVR_ISA_XMEGAU

2013-05-31  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_begin): Don't align text/data/bss sections
	for ELF.

2013-05-31  Paul Brook  <paul@codesourcery.com>

	gas/
	* config/tc-mips.c (s_ehword): New.

2013-05-30  Paul Brook  <paul@codesourcery.com>

	* config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.

2013-05-29  Maciej W. Rozycki  <macro@codesourcery.com>

	* write.c (resolve_reloc_expr_symbols): On REL targets don't
	convert relocs who have no relocatable field either.  Rephrase
	the conditional so that the PC-relative check is only applied
	for REL targets.

2013-05-28  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* config/tc-mips.c (macro) <ld>: Don't use $zero for address
	calculation.

2013-05-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (reloc_table): Update to use
	BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of
	BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
	(md_apply_fix): Likewise.
	(aarch64_force_relocation): Likewise.

2013-05-28  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/tc-arm.c (it_fsm_post_encode): Improve
	warning messages about deprecated IT block formats.

2013-05-28  Marcus Shawcroft  <marcus.shawcroft@arm.com>

	* config/tc-aarch64.c (md_apply_fix): Move value range checking
	inside fx_done condition.

2013-05-22  Jürgen Urban  <JuergenUrban@gmx.de>

	* config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.

2013-05-20  Peter Bergner <bergner@vnet.ibm.com>

	* config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
	and clean up warning when using PRINT_OPCODE_TABLE.

2013-05-20  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_apply_fix): Hoist code common to insn
	and data fixups performing shift/high adjust/sign extension on
	fieldval.  Sink fx_pcrel handling and checks.  Use fixP->fx_size
	when writing data fixups rather than recalculating size.

2013-05-16  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

	* doc/c-msp430.texi: Fix typo.

2013-05-16  Tristan Gingold  <gingold@adacore.com>

	* config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
	are also TOC symbols.

2013-05-16  Nick Clifton  <nickc@redhat.com>

	* config/tc-msp430.c: Make -mmcu recognise more part numbers.
	Add -mcpu command to specify core type.
	* doc/c-msp430.texi: Update documentation.

2013-05-09  Andrew Pinski  <apinski@cavium.com>

	* config/tc-mips.c (struct mips_set_options): New ase_virt field.
	(mips_opts): Update for the new field.
	(file_ase_virt): New variable.
	(ISA_SUPPORTS_VIRT_ASE): New macro.
	(ISA_SUPPORTS_VIRT64_ASE): New macro.
	(MIPS_CPU_ASE_VIRT): New define.
	(is_opcode_valid): Handle ase_virt.
	(macro_build): Handle "+J".
	(validate_mips_insn): Likewise.
	(mips_ip): Likewise.
	(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
	(md_longopts): Add mvirt and mnovirt
	(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
	(mips_after_parse_args): Handle ase_virt field.
	(s_mipsset): Handle "virt" and "novirt".
	(mips_elf_final_processing): Add a comment about virt ASE might need
	a new flag.
	(md_show_usage): Print out the usage of -mvirt and mno-virt options.
	* doc/c-mips.texi: Document -mvirt and -mno-virt.
	Document ".set virt" and ".set novirt".

2013-05-09  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
	control of operand flag bits.

2013-05-07  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
	(PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
	(PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
	(PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
	(md_apply_fix): Set fx_no_overflow for assorted relocations.
	Shift and sign-extend fieldval for use by some VLE reloc
	operand->insert functions.

2013-05-06  Paul Brook  <paul@codesourcery.com>
	    Catherine Moore  <clm@codesourcery.com>

	* config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
	(limited_pcrel_reloc_p): Likewise.
	(md_apply_fix): Likewise.
	(tc_gen_reloc): Likewise.

2013-05-06  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (limited_pcrel_reloc_p): New function.
	(mips_fix_adjustable): Adjust pc-relative check to use
	limited_pc_reloc_p.

2013-05-02  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
	(s_mips_stab): Do not restrict to stabn only.

2013-05-02  Nick Clifton  <nickc@redhat.com>

	* config/tc-msp430.c: Add support for the MSP430X architecture.
	Add code to insert a NOP instruction after any instruction that
	might change the interrupt state.
	Add support for the LARGE memory model.
	Add code to initialise the .MSP430.attributes section.
	* config/tc-msp430.h: Add support for the MSP430X architecture.
	* doc/c-msp430.texi: Document the new -mL and -mN command line
	options.
	* NEWS: Mention support for the MSP430X architecture.

2013-05-01  Maciej W. Rozycki  <macro@codesourcery.com>

	* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
	alpha*-*-linux*ecoff*.

2013-04-30  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* config/tc-mips.c (mips_ip): Add sizelo.
	For "+C", "+G", and "+H", set sizelo and compare against it.

2013-04-29  Nick Clifton  <nickc@redhat.com>

	* as.c (Options): Add -gdwarf-sections.
	(parse_args): Likewise.
	* as.h (flag_dwarf_sections): Declare.
	* dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
	(process_entries): When -gdwarf-sections is enabled generate
	fragmentary .debug_line sections.
	(out_debug_line): Set the section for the .debug_line section end
	symbol.
	* doc/as.texinfo: Document -gdwarf-sections.
	* NEWS: Mention -gdwarf-sections.

2013-04-26  Christian Groessler  <chris@groessler.org>

	* config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
	according to the target parameter.  Don't call s_segm since s_segm
	calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
	initialized yet.
	(md_begin): Call s_segm according to target parameter from command
	line.

2013-04-25  Alan Modra  <amodra@gmail.com>

	* configure.in: Allow little-endian linux.
	* configure: Regenerate.

2013-04-24  Sandra Loosemore  <sandra@codesourcery.com>

	* config/tc-nios2.c (nios2_control_register_arg_p): Rename
	"fstatus" control register to "eccinj".

2013-04-19  Kai Tietz  <ktietz@redhat.com>

	* configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.

2013-04-15  Julian Brown  <julian@codesourcery.com>

	* expr.c (add_to_result, subtract_from_result): Make global.
	* expr.h (add_to_result, subtract_from_result): Add prototypes.
	* config/tc-sh.c (sh_optimize_expr): Use add_to_result,
	subtract_from_result to handle extra bit of precision for .sleb128
	directive operands.

2013-04-10  Julian Brown  <julian@codesourcery.com>

	* read.c (convert_to_bignum): Add sign parameter. Use it
	instead of X_unsigned to determine sign of resulting bignum.
	(emit_expr): Pass extra argument to convert_to_bignum.
	(emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
	X_extrabit to convert_to_bignum.
	(parse_bitfield_cons): Set X_extrabit.
	* expr.c (make_expr_symbol, expr_build_uconstant, operand):
	Initialise X_extrabit field as appropriate.
	(add_to_result): New.
	(subtract_from_result): New.
	(expr): Use above.
	* expr.h (expressionS): Add X_extrabit field.

2013-04-10  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
	register being PC when is_t or writeback, and use distinct
	diagnostic for the latter case.

2013-04-10  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (parse_operands): Re-write
	po_barrier_or_imm().
	(do_barrier): Remove bogus constraint().
	(do_t_barrier): Remove.

2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>

	* gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
	ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
	ATmega2564RFR2
	* gas/doc/c-avr.texi (-mmcu documentation): Likewise.

2013-04-09  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_vmrs): Accept all control registers.
	Use local variable Rt in more places.
	(do_vmsr): Accept all control registers.

2013-04-09  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
	if there was none specified for moves between scalar and core
	register.

2013-04-09  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
	NEON_ALL_LANES case.

2013-04-08  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
	PC-relative VSTR.

2013-04-08  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
	entry to sp_fiq.

2013-04-03  Alan Modra  <amodra@gmail.com>

	* doc/as.texinfo: Add support to generate man options for h8300.
	* doc/c-h8300.texi: Likewise.

2013-03-28  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
	Cortex-A57.

2013-03-27  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR binutils/15068
	* config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.

2013-03-26  Nick Clifton  <nickc@redhat.com>

	PR gas/15295
	* listing.c (rebuffer_line): Rewrite to avoid seeking back to the
	start of the file each time.

	PR gas/15178
	* config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
	FreeBSD targets.

2013-03-26  Douglas B Rupp  <rupp@gnat.com>

	* config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
	after fixup.

2013-03-21  Will Newton  <will.newton@linaro.org>

	* config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
	pc-relative str instructions in Thumb mode.

2013-03-21  Michael Schewe  <michael.schewe@gmx.net>

	* config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
	@(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
	R_H8_DISP32A16.
	* config/tc-h8300.h: Remove duplicated defines.

2013-03-21  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>

	PR gas/15282
	* tc-avr.c (mcu_has_3_byte_pc): New function.
	(tc_cfi_frame_initial_instructions): Call it to find return
	address size.

2013-03-20  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR gas/15095
	* config/tc-tic6x.c (tic6x_try_encode): Handle
	tic6x_coding_dreg_(msb|lsb) field coding types and use it to
	encode register pair numbers when required.

2013-03-15  Will Newton  <will.newton@linaro.org>

	* config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
	in vstr in Thumb mode for pre-ARMv7 cores.

2013-03-14  Andreas Schwab  <schwab@suse.de>

	* doc/c-arc.texi (ARC Directives): Revert last change and use
	@itemize instead of @table.
	* doc/c-arm.texi (ARM-Instruction-Set): Likewise.

2013-03-14  Nick Clifton  <nickc@redhat.com>

	PR gas/15273
	* config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
	NULL message, instead just check ARM_CPU_IS_ANY directly.

2013-03-14  Nick Clifton  <nickc@redhat.com>

	PR gas/15212
	* doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
	for table format.
	* doc/c-arm.texi (ARM-Instruction-Set): Likewise.  Also add text
	to the @item directives.
	(ARM-Neon-Alignment): Move to correct place in the document.
	* doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
	formatting.
	* doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
	@smallexample.

2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* config/tc-nios2.c (nios2_consume_arg): Delete 'k' case.  Add 'o'
	case.  Add default BAD_CASE to switch.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* config/tc-nios2.c (nios2_assemble_args_ds): New function.
	(nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.

2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/tc-arm.c (crc_ext_armv8): New feature set.
	(UNPRED_REG): New macro.
	(do_crc32_1): New function.
	(do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
	do_crc32ch, do_crc32cw): Likewise.
	(TUEc): New macro.
	(insns): Add entries for crc32 mnemonics.
	(arm_extensions): Add entry for crc.

2013-03-08  Chung-Lin Tang  <cltang@codesourcery.com>

	* write.h (struct fix): Add fx_dot_frag field.
	(dot_frag): Declare.
	* write.c (dot_frag): New variable.
	(fix_new_internal): Set fx_dot_frag field with dot_frag.
	(fixup_segment): Base calculation of fx_offset with fx_dot_frag.
	* expr.c (expr): Save value of frag_now in dot_frag when setting
	dot_value.
	* read.c (emit_expr): Likewise. Delete comments.

2013-03-07  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (flag_code_names): Removed.
	(i386_index_check): Rewrote.

2013-03-05  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
	add comment.
	(aarch64_double_precision_fmovable): New function.
	(parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
	function; handle hexadecimal representation of IEEE754 encoding.
	(parse_operands): Update the call to parse_aarch64_imm_float.

2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
	(check_hle): Updated.
	(md_assemble): Likewise.
	(parse_insn): Likewise.

2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (_i386_insn): Add rep_prefix.
	(md_assemble): Check if REP prefix is OK.
	(parse_insn): Remove expecting_string_instruction.  Set
	i.rep_prefix.

2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (aarch64_features): Add the 'crc' option.

2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
	for system registers.

2013-02-27  DJ Delorie  <dj@redhat.com>

	* config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
	(rl78_op): Handle %code().
	(rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
	(tc_gen_reloc): Likwise; convert to a computed reloc.
	(md_apply_fix): Likewise.

2013-02-25  Kaushik Phatak  <Kaushik.Phatak@kpitcummins.com>

	* config/rl78-parse.y: Fix encoding of DIVWU insn.

2013-02-25  Terry Guo  <terry.guo@arm.com>

	* config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
	* doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
	list of accepted CPUs.

2013-02-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/15159
	* config/tc-i386.c (cpu_arch): Add ".smap".

	* doc/c-i386.texi: Document smap.

2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (s_cpload): Call mips_mark_labels and set
	mips_assembling_insn appropriately.
	(s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.

2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (append_insn): Correct indentation, remove
	extraneous braces.

2013-02-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/tc-arm.c (do_neon_mov): Break on NS_NULL.

2013-02-15  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* configure.tgt: Add nios2-*-rtems*.

2013-02-14  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (md_begin): Change to check if 'name' is
	NULL.

2013-02-09  Jürgen Urban  <JuergenUrban@gmx.de>

	* config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
	(macro): Use it.  Assert that trunc.w.s is not used for r5900.

2013-02-08  Yi-Hsiu, Hsu  <ahsu@marvell.com>

	* gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
	core.

2013-02-06  Sandra Loosemore  <sandra@codesourcery.com>
	    Andrew Jenner <andrew@codesourcery.com>

	Based on patches from Altera Corporation.

	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
	(TARGET_CPU_HFILES): Add config/tc-nios2.h.
	* Makefile.in: Regenerated.
	* configure.tgt: Add case for nios2*-linux*.
	* config/obj-elf.c: Conditionally include elf/nios2.h.
	* config/tc-nios2.c: New file.
	* config/tc-nios2.h: New file.
	* doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Set NIOSII.
	* doc/as.texinfo (Overview): Add Nios II options.
	(Machine Dependencies): Include c-nios2.texi.
	* doc/c-nios2.texi: New file.
	* NEWS: Note Altera Nios II support.

2013-02-06  Alan Modra  <amodra@gmail.com>

	PR gas/14255
	* config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
	Don't skip fixups with fx_subsy non-NULL.
	* config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
	with fx_subsy non-NULL.

2013-02-04  H.J. Lu  <hongjiu.lu@intel.com>

	* doc/c-metag.texi: Add "@c man" markers.

2013-02-04  Alan Modra  <amodra@gmail.com>

	* write.c (fixup_segment): Return void.  Delete seg_reloc_count
	related code.
	(TC_ADJUST_RELOC_COUNT): Delete.
	* config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.

2013-02-04  Alan Modra  <amodra@gmail.com>

	* po/POTFILES.in: Regenerate.

2013-01-30  Markos Chandras  <markos.chandras@imgtec.com>

	* config/tc-metag.c: Make SWAP instruction less permissive with
	its operands.

2013-01-29  DJ Delorie  <dj@redhat.com>

	* config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
	relocs in .word/.etc statements.

2013-01-29  Roland McGrath  <mcgrathr@google.com>

	* config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
	immediate value for 8-bit offset" error so it shows line info.

2013-01-24  Joseph Myers  <joseph@codesourcery.com>

	* config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
	for 64-bit output.

2013-01-24  Nick Clifton  <nickc@redhat.com>

	* config/tc-v850.c: Add support for e3v5 architecture.
	* doc/c-v850.texi: Mention new support.

2013-01-23  Nick Clifton  <nickc@redhat.com>

	PR gas/15039
	* config/tc-avr.c: Include dwarf2dbg.h.

2013-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (reloc): Support size relocation only for ELF.
	(tc_i386_fix_adjustable): Likewise.
	(lex_got): Likewise.
	(tc_gen_reloc): Likewise.

2013-01-17  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (output_operand_error_record): Change to output
	the out-of-range error message as value-expected message if there is
	only one single value in the expected range.
	(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
	LSL #0 as a programmer-friendly feature.

2013-01-16  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
	(tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
	BFD_RELOC_64_SIZE relocations.
	(lex_got): Support "symbol@SIZE" and don't create GOT symbol
	for it.
	(tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
	relocations against local symbols.

2013-01-16  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
	finding some sort of toc syntax error, and break to avoid
	compiler uninit warning.

2013-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/15019
	* config/tc-i386.c (lex_got): Increment length by 1 if the
	relocation token is removed.

2013-01-15  Nick Clifton  <nickc@redhat.com>

	* config/tc-v850.c (md_assemble): Allow signed values for
	V850E_IMMEDIATE.

2013-01-11  Sean Keys  <skeys@ipdatasys.com>

	* config/tc-xgate.c (md_begin): Fix mistake made when going from
	git to cvs.

2013-01-10  Peter Bergner <bergner@vnet.ibm.com>

	* doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
	* doc/c-ppc.texi (PowerPC-Opts):  Likewise.
	* config/tc-ppc.c (md_show_usage): Likewise.
	(ppc_handle_align): Handle power8's group ending nop.

2013-01-10  Sean Keys  <skeys@ipdatasys.com>

	* config/tc-xgate.c (md_begin): Fix the printing of opcodes so
	that the assember exits after the opcodes have been printed.

2013-01-10  H.J. Lu  <hongjiu.lu@intel.com>

	* app.c: Remove trailing white spaces.
	* as.c: Likewise.
	* as.h: Likewise.
	* cond.c: Likewise.
	* dw2gencfi.c: Likewise.
	* dwarf2dbg.h: Likewise.
	* ecoff.c: Likewise.
	* input-file.c: Likewise.
	* itbl-lex.h: Likewise.
	* output-file.c: Likewise.
	* read.c: Likewise.
	* sb.c: Likewise.
	* subsegs.c: Likewise.
	* symbols.c: Likewise.
	* write.c: Likewise.
	* config/tc-i386.c: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/Makefile.in: Likewise.
	* doc/c-aarch64.texi: Likewise.
	* doc/c-alpha.texi: Likewise.
	* doc/c-arc.texi: Likewise.
	* doc/c-arm.texi: Likewise.
	* doc/c-avr.texi: Likewise.
	* doc/c-bfin.texi: Likewise.
	* doc/c-cr16.texi: Likewise.
	* doc/c-d10v.texi: Likewise.
	* doc/c-d30v.texi: Likewise.
	* doc/c-h8300.texi: Likewise.
	* doc/c-hppa.texi: Likewise.
	* doc/c-i370.texi: Likewise.
	* doc/c-i386.texi: Likewise.
	* doc/c-i860.texi: Likewise.
	* doc/c-m32c.texi: Likewise.
	* doc/c-m32r.texi: Likewise.
	* doc/c-m68hc11.texi: Likewise.
	* doc/c-m68k.texi: Likewise.
	* doc/c-microblaze.texi: Likewise.
	* doc/c-mips.texi: Likewise.
	* doc/c-msp430.texi: Likewise.
	* doc/c-mt.texi: Likewise.
	* doc/c-s390.texi: Likewise.
	* doc/c-score.texi: Likewise.
	* doc/c-sh.texi: Likewise.
	* doc/c-sh64.texi: Likewise.
	* doc/c-tic54x.texi: Likewise.
	* doc/c-tic6x.texi: Likewise.
	* doc/c-v850.texi: Likewise.
	* doc/c-xc16x.texi: Likewise.
	* doc/c-xgate.texi: Likewise.
	* doc/c-xtensa.texi: Likewise.
	* doc/c-z80.texi: Likewise.
	* doc/internals.texi: Likewise.

2013-01-10  Roland McGrath  <mcgrathr@google.com>

	* hash.c (hash_new_sized): Make it global.
	* hash.h: Declare it.
	* macro.c (define_macro): Use hash_new_sized instead of hash_new,
	pass a small size.

2013-01-10  Will Newton <will.newton@imgtec.com>

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* config/tc-metag.c: New file.
	* config/tc-metag.h: New file.
	* configure.tgt: Add Meta.
	* doc/Makefile.am: Add Meta.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi: Add Meta.
	* doc/as.texiinfo: Document Meta options.
	* doc/c-metag.texi: New file.

2013-01-09  Steve Ellcey  <sellcey@mips.com>

	* config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
	calls.
	* config/tc-mips.c (internalError): Remove, replace with abort.

2013-01-08  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (parse_operands): Change to compare the result
	of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.

2013-01-07  Nick Clifton  <nickc@redhat.com>

	PR gas/14887
	* config/tc-arm.c (skip_past_char): Skip whitespace before the
	anticipated character.
	* config/tc-arm.c (parse_address_main): Delete skip of whitespace
	here as it is no longer needed.

2013-01-06  Andreas Schwab  <schwab@linux-m68k.org>

	* doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
	* doc/c-score.texi (SCORE-Opts): Likewise.
	* doc/c-tic54x.texi (TIC54X-Directives): Likewise.

2013-01-04  Juergen Urban <JuergenUrban@gmx.de>

	* config/tc-mips.c: Add support for MIPS r5900.
	Add M_LQ_AB and M_SQ_AB to support large values for instructions
	lq and sq.
	(can_swap_branch_p, get_append_method): Detect some conditional
	short loops to fix a bug on the r5900 by NOP in the branch delay
	slot.
	(M_MUL): Support 3 operands in multu on r5900.
	(M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
	(s_mipsset): Force 32 bit floating point on r5900.
	(mips_ip): Check parameter range of instructions mfps and mtps on
	r5900.
	* configure.in: Detect CPU type when target string contains r5900
	(e.g. mips64r5900el-linux-gnu).

2013-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	* as.c (parse_args): Update copyright year to 2013.

2013-01-02  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
	and "cortex57".

2013-01-02  Nick Clifton  <nickc@redhat.com>

	PR gas/14987
	* config/tc-arm.c (parse_address_main): Skip whitespace before a
	closing bracket.

For older changes see ChangeLog-2012

Copyright (C) 2013 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: