path: root/binutils/testsuite/lib/binutils-common.exp

# Copyright (C) 1993-2018 Free Software Foundation, Inc.
#
# This file is part of the GNU Binutils.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
# MA 02110-1301, USA.

# True if the object format is known to be ELF.
#
proc is_elf_format {} {
    # config.sub for these targets curiously transforms a target doublet
    # ending in -elf to -none.  eg. m68hc12-elf to m68hc12-unknown-none
    # They are always elf.
    if { [istarget m68hc1*-*] || [istarget xgate-*] } {
	return 1;
    }

    if {    ![istarget *-*-eabi*]
	 && ![istarget *-*-elf*]
	 && ![istarget *-*-freebsd*]
	 && ![istarget *-*-gnu*]
	 && ![istarget *-*-irix5*]
	 && ![istarget *-*-irix6*]
	 && ![istarget *-*-linux*]
	 && ![istarget *-*-lynxos*]
	 && ![istarget *-*-nacl*]
	 && ![istarget *-*-netbsd*]
	 && ![istarget *-*-openbsd*]
	 && ![istarget *-*-rtems*]
	 && ![istarget *-*-solaris2*]
	 && ![istarget *-*-symbianelf*]
	 && ![istarget *-*-sysv4*]
	 && ![istarget *-*-unixware*]
	 && ![istarget *-*-wasm32*]
	 && ![istarget avr-*-*]
	 && ![istarget bfin-*-uclinux]
	 && ![istarget frv-*-uclinux*]
	 && ![istarget hppa*64*-*-hpux*]
	 && ![istarget ia64-*-hpux*]
	 && ![istarget sh*-*-uclinux*]
	 && ![istarget tic6x*-*-uclinux*] } {
	return 0
    }

    if {    [istarget *-*-linux*aout*]
	 || [istarget *-*-linux*ecoff*]
	 || [istarget *-*-linux*oldld*]
	 || [istarget *-*-rtemscoff*]
	 || [istarget i?86-*-freebsd\[12\].*] } {
	return 0
    }

    if { ![istarget *-*-netbsdelf*]
	 && (   [istarget *-*-netbsd*aout*]
	     || [istarget *-*-netbsdpe*]
	     || [istarget arm*-*-netbsd*]
	     || [istarget i*86-*-netbsd*]
	     || [istarget vax-*-netbsd*]
	     || [istarget ns32k-*-netbsd*]) } {
    	return 0
    }

    if {    [istarget arm-*-openbsd*]
	 || [istarget i386-*-openbsd\[0-2\].*]
	 || [istarget i386-*-openbsd3.\[0-2\]]
	 || [istarget ns32k-*-openbsd*]
	 || [istarget vax-*-openbsd*] } {
	return 0
    }

    return 1
}

# True if the object format is known to be a.out.
#
proc is_aout_format {} {
    if { [istarget *-*-*\[ab\]out*]
	 || [istarget *-*-linux*oldld*]
	 || [istarget *-*-bsd*]
	 || [istarget *-*-msdos*]
	 || [istarget arm-*-netbsd*]
	 || [istarget arm-*-openbsd*]
	 || [istarget arm-*-riscix*]
	 || [istarget i?86-*-freebsd\[12\].*]
	 || [istarget i?86-*-netbsd*]
	 || [istarget i?86-*-openbsd\[0-2\]*]
	 || [istarget i?86-*-openbsd3.\[0-2\]*]
	 || [istarget i?86-*-vsta]
	 || [istarget i?86-*-mach*]
	 || [istarget ns32k-*-*]
	 || [istarget pdp11-*-*]
	 || [istarget vax-dec-ultrix*]
	 || [istarget vax-*-netbsd] } {
	return 1
    }
    return 0
}

# True if the object format is known to be PE COFF.
#
proc is_pecoff_format {} {
    if { ![istarget *-*-mingw*]
	 && ![istarget *-*-cygwin*]
	 && ![istarget *-*-cegcc*]
	 && ![istarget *-*-pe*] } {
	return 0
    }

    return 1
}

# True if the object format is known to be 64-bit ELF.
#
proc is_elf64 { binary_file } {
    global READELF
    global READELFFLAGS

    set readelf_size ""
    catch "exec $READELF $READELFFLAGS -h $binary_file > readelf.out" got

    if ![string match "" $got] then {
	return 0
    }

    if { ![regexp "\n\[ \]*Class:\[ \]*ELF(\[0-9\]+)\n" \
	   [file_contents readelf.out] nil readelf_size] } {
	return 0
    }

    if { $readelf_size == "64" } {
	return 1
    }

    return 0
}

# True if the ELF target supports STB_GNU_UNIQUE with the ELF header's
# OSABI field set to ELFOSABI_GNU.
#
# This generally depends on the target OS only, however there are a
# number of exceptions for bare metal targets as follows.  The MSP430
# and Visium targets set OSABI to ELFOSABI_STANDALONE and cannot
# support STB_GNU_UNIQUE.  Likewise non-EABI ARM targets set OSABI to
# ELFOSABI_ARM, and TI C6X targets to ELFOSABI_C6000_*.  Finally
# rather than `bfd_elf_final_link' AM33/2.0, D30V, DLX, and
# picoJava targets use `_bfd_generic_final_link', which does not
# support STB_GNU_UNIQUE symbol binding causing assertion failures.
#
proc supports_gnu_unique {} {
    if { [istarget *-*-gnu*]
	 || [istarget *-*-linux*]
	 || [istarget *-*-nacl*] } {
	return 1
    }
    if { [istarget "arm*-*-*eabi*"] } {
	return 1
    }
    if { [istarget "wasm32*-*-*"] } {
        return 1
    }
    if { ![istarget "*-*-elf*"] } {
	return 0
    }
    if { [istarget "arm*-*-*"]
	 || [istarget "msp430-*-*"]
	 || [istarget "tic6x-*-*"]
	 || [istarget "visium-*-*"] } {
	return 0
    }
    if { [istarget "am33_2.0-*-*"]
	 || [istarget "d30v-*-*"]
	 || [istarget "dlx-*-*"]
	 || [istarget "pj*-*-*"] } {
	return 0
    }
    return 1
}

# True for targets that do not sort .symtab as per the ELF standard.
# ie. any that have mips_elf32_be_vec, mips_elf32_le_vec,
# mips_elf32_n_be_vec or mips_elf32_n_le_vec as the primary bfd target
# vector in config.bfd.  When syncing with config.bfd, don't forget that
# earlier case-matches trump later ones.
proc is_bad_symtab {} {
    if { ![istarget "mips*-*-*"] } {
	return 0;
    }
    if { [istarget "*-*-chorus*"]
	 || [istarget "*-*-irix5*"]
	 || [istarget "*-*-irix6*"]
	 || [istarget "*-*-none"]
	 || [istarget "*-*-rtems*"]
	 || [istarget "*-*-windiss"] } {
	return 1;
    }
    if { [istarget "*-*-elf*"]
	 && ![istarget "*-sde-*"]
	 && ![istarget "*-mti-*"]
	 && ![istarget "*-img-*"] } {
	return 1;
    }
    if { [istarget "*-*-openbsd*"]
	 && ![istarget "mips64*-*-*"] } {
	return 1;
    }
    return 0;
}

# Compare two files line-by-line.  FILE_1 is the actual output and FILE_2
# is the expected output.  Ignore blank lines in either file.
#
# FILE_2 is a series of regexps, comments and # directives.  The directives
# are:
#
#    #pass
#        Treat the test as a PASS if everything up till this point has
#        matched.  Ignore any remaining lines in either FILE_1 or FILE_2.
#
#    #failif
#        Reverse the sense of the test: expect differences to exist.
#
#    #...
#    REGEXP
#        Skip all lines in FILE_1 until the first that matches REGEXP.
#
# Other # lines are comments.  Regexp lines starting with the `!' character
# specify inverse matching (use `\!' for literal matching against a leading
# `!').  Skip empty lines in both files.
#
# The first optional argument is a list of regexp substitutions of the form:
#
#    EXP1 SUBSPEC1 EXP2 SUBSPEC2 ...
#
# This tells the function to apply each regexp substitution EXPi->SUBSPECi
# in order to every line of FILE_2.
#
# Return nonzero if differences exist.
proc regexp_diff { file_1 file_2 args } {
    set eof -1
    set end_1 0
    set end_2 0
    set differences 0
    set diff_pass 0
    set fail_if_match 0
    set ref_subst ""
    if { [llength $args] > 0 } {
	set ref_subst [lindex $args 0]
    }
    if { [llength $args] > 1 } {
	perror "Too many arguments to regexp_diff"
	return 1
    }

    if [file exists $file_1] then {
	set file_a [open $file_1 r]
    } else {
	perror "$file_1 doesn't exist"
	return 1
    }

    if [file exists $file_2] then {
	set file_b [open $file_2 r]
    } else {
	perror "$file_2 doesn't exist"
	close $file_a
	return 1
    }

    verbose " Regexp-diff'ing: $file_1 $file_2" 2

    while { 1 } {
	set line_a ""
	set line_b ""
	while { [string length $line_a] == 0 } {
	    # Ignore blank line in FILE_1.
	    if { [gets $file_a line_a] == $eof } {
		set end_1 1
		break
	    }
	}
	while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
	    if { [string match "#pass" $line_b] } {
		set end_2 1
		set diff_pass 1
		break
	    } elseif { [string match "#failif" $line_b] } {
		send_log "fail if no difference\n"
		verbose "fail if no difference" 3
		set fail_if_match 1
	    } elseif { [string match "#..." $line_b] } {
		if { [gets $file_b line_b] == $eof } {
		    set end_2 1
		    set diff_pass 1
		    break
		}
		set negated [expr { [string index $line_b 0] == "!" }]
		set line_bx [string range $line_b $negated end]
		set n [expr { $negated ? "! " : "" }]
		# Substitute on the reference.
		foreach {name value} $ref_subst {
		    regsub -- $name $line_bx $value line_bx
		}
		verbose "looking for $n\"^$line_bx$\"" 3
		while { [expr [regexp "^$line_bx$" "$line_a"] == $negated] } {
		    verbose "skipping    \"$line_a\"" 3
		    if { [gets $file_a line_a] == $eof } {
			set end_1 1
			break
		    }
		}
		break
	    }
	    if { [gets $file_b line_b] == $eof } {
		set end_2 1
		break
	    }
	}

	if { $diff_pass } {
	    break
	} elseif { $end_1 && $end_2 } {
	    break
	} elseif { $end_1 } {
	    send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
	    verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
	    set differences 1
	    break
	} elseif { $end_2 } {
	    send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
	    verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
	    set differences 1
	    break
	} else {
	    set negated [expr { [string index $line_b 0] == "!" }]
	    set line_bx [string range $line_b $negated end]
	    set n [expr { $negated ? "! " : "" }]
	    set s [expr { $negated ? "  " : "" }]
	    # Substitute on the reference.
	    foreach {name value} $ref_subst {
		regsub -- $name $line_bx $value line_bx
	    }
	    verbose "regexp $n\"^$line_bx$\"\nline   \"$line_a\"" 3
	    if { [expr [regexp "^$line_bx$" "$line_a"] == $negated] } {
		send_log "regexp_diff match failure\n"
		send_log "regexp $n\"^$line_bx$\"\nline   $s\"$line_a\"\n"
		verbose "regexp_diff match failure\n" 3
		set differences 1
	    }
	}
    }

    if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
	send_log "$file_1 and $file_2 are different lengths\n"
	verbose "$file_1 and $file_2 are different lengths" 3
	set differences 1
    }

    if { $fail_if_match } {
	if { $differences == 0 } {
	    set differences 1
	} else {
	    set differences 0
	}
    }

    close $file_a
    close $file_b

    return $differences
}