path: root/binutils/binutils.info

This is Info file binutils.info, produced by Makeinfo-1.55 from the
input file ./binutils.texi.

START-INFO-DIR-ENTRY
* Binutils::                    The GNU binary utilities "ar", "ld", "objcopy",
				"objdump", "nm", "size", "strings", "strip", and "ranlib".
END-INFO-DIR-ENTRY

   Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the entire resulting derived work is distributed under the terms
of a permission notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions.


File: binutils.info,  Node: Top,  Next: ar,  Prev: (dir),  Up: (dir)

Introduction
************

   This brief manual contains preliminary documentation for the GNU
binary utilities (collectively version 2.2):

* Menu:

* ar::                          Create, modify, and extract from archives
* ld:(ld)Overview.              Combine object and archive files
* nm::                          List symbols from object files
* objcopy::			Copy and translate object files
* objdump::                     Display information from object files
* ranlib::                      Generate index to archive contents
* size::                        List section sizes and total size
* strings::                     List printable strings from files
* strip::                       Discard symbols
* c++filt::			Filter to demangle encoded C++ symbols
* Index::


File: binutils.info,  Node: ar,  Next: nm,  Prev: Top,  Up: Top

ar
**

     ar [-]P[MOD [RELPOS]] ARCHIVE [MEMBER...]
     ar -M [ <mri-script ]

   The GNU `ar' program creates, modifies, and extracts from archives.
An "archive" is a single file holding a collection of other files in a
structure that makes it possible to retrieve the original individual
files (called "members" of the archive).

   The original files' contents, mode (permissions), timestamp, owner,
and group are preserved in the archive, and can be restored on
extraction.

   GNU `ar' can maintain archives whose members have names of any
length; however, depending on how `ar' is configured on your system, a
limit on member-name length may be imposed for compatibility with
archive formats maintained with other tools.  If it exists, the limit
is often 15 characters (typical of formats related to a.out) or 16
characters (typical of formats related to coff).

   `ar' is considered a binary utility because archives of this sort
are most often used as "libraries" holding commonly needed subroutines.

   `ar' creates an index to the symbols defined in relocatable object
modules in the archive when you specify the modifier `s'.  Once
created, this index is updated in the archive whenever `ar' makes a
change to its contents (save for the `q' update operation).  An archive
with such an index speeds up linking to the library, and allows
routines in the library to call each other without regard to their
placement in the archive.

   You may use `nm -s' or `nm --print-armap' to list this index table.
If an archive lacks the table, another form of `ar' called `ranlib' can
be used to add just the table.

   GNU `ar' is designed to be compatible with two different facilities.
You can control its activity using command-line options, like the
different varieties of `ar' on Unix systems; or, if you specify the
single command-line option `-M', you can control it with a script
supplied via standard input, like the MRI "librarian" program.

* Menu:

* ar-cmdline::                  Controlling `ar' on the command line
* ar-scripts::                  Controlling `ar' with a script


File: binutils.info,  Node: ar-cmdline,  Next: ar-scripts,  Prev: ar,  Up: ar

Controlling `ar' on the command line
====================================

     ar [-]P[MOD [RELPOS]] ARCHIVE [MEMBER...]

   When you use `ar' in the Unix style, `ar' insists on at least two
arguments to execute: one keyletter specifying the *operation*
(optionally accompanied by other keyletters specifying *modifiers*),
and the archive name to act on.

   Most operations can also accept further MEMBER arguments, specifying
particular files to operate on.

   GNU `ar' allows you to mix the operation code P and modifier flags
MOD in any order, within the first command-line argument.

   If you wish, you may begin the first command-line argument with a
dash.

   The P keyletter specifies what operation to execute; it may be any
of the following, but you must specify only one of them:

`d'
     *Delete* modules from the archive.  Specify the names of modules to
     be deleted as MEMBER...; the archive is untouched if you specify
     no files to delete.

     If you specify the `v' modifier, `ar' lists each module as it is
     deleted.

`m'
     Use this operation to *move* members in an archive.

     The ordering of members in an archive can make a difference in how
     programs are linked using the library, if a symbol is defined in
     more than one member.

     If no modifiers are used with `m', any members you name in the
     MEMBER arguments are moved to the *end* of the archive; you can
     use the `a', `b', or `i' modifiers to move them to a specified
     place instead.

`p'
     *Print* the specified members of the archive, to the standard
     output file.  If the `v' modifier is specified, show the member
     name before copying its contents to standard output.

     If you specify no MEMBER arguments, all the files in the archive
     are printed.

`q'
     *Quick append*; add the files MEMBER... to the end of ARCHIVE,
     without checking for replacement.

     The modifiers `a', `b', and `i' do *not* affect this operation;
     new members are always placed at the end of the archive.

     The modifier `v' makes `ar' list each file as it is appended.

     Since the point of this operation is speed, the archive's symbol
     table index is not updated, even if it already existed; you can
     use `ar s' or `ranlib' explicitly to update the symbol table index.

`r'
     Insert the files MEMBER... into ARCHIVE (with *replacement*). This
     operation differs from `q' in that any previously existing members
     are deleted if their names match those being added.

     If one of the files named in MEMBER... does not exist, `ar'
     displays an error message, and leaves undisturbed any existing
     members of the archive matching that name.

     By default, new members are added at the end of the file; but you
     may use one of the modifiers `a', `b', or `i' to request placement
     relative to some existing member.

     The modifier `v' used with this operation elicits a line of output
     for each file inserted, along with one of the letters `a' or `r'
     to indicate whether the file was appended (no old member deleted)
     or replaced.

`t'
     Display a *table* listing the contents of ARCHIVE, or those of the
     files listed in MEMBER... that are present in the archive.
     Normally only the member name is shown; if you also want to see
     the modes (permissions), timestamp, owner, group, and size, you can
     request that by also specifying the `v' modifier.

     If you do not specify a MEMBER, all files in the archive are
     listed.

     If there is more than one file with the same name (say, `fie') in
     an archive (say `b.a'), `ar t b.a fie' lists only the first
     instance; to see them all, you must ask for a complete listing--in
     our example, `ar t b.a'.

`x'
     *Extract* members (named MEMBER) from the archive.  You can use
     the `v' modifier with this operation, to request that `ar' list
     each name as it extracts it.

     If you do not specify a MEMBER, all files in the archive are
     extracted.

   A number of modifiers (MOD) may immediately follow the P keyletter,
to specify variations on an operation's behavior:

`a'
     Add new files *after* an existing member of the archive.  If you
     use the modifier `a', the name of an existing archive member must
     be present as the RELPOS argument, before the ARCHIVE
     specification.

`b'
     Add new files *before* an existing member of the archive.  If you
     use the modifier `b', the name of an existing archive member must
     be present as the RELPOS argument, before the ARCHIVE
     specification.  (same as `i').

`c'
     *Create* the archive.  The specified ARCHIVE is always created if
     it did not exist, when you request an update.  But a warning is
     issued unless you specify in advance that you expect to create it,
     by using this modifier.

`i'
     Insert new files *before* an existing member of the archive.  If
     you use the modifier `i', the name of an existing archive member
     must be present as the RELPOS argument, before the ARCHIVE
     specification.  (same as `b').

`l'
     This modifier is accepted but not used.

`o'
     Preserve the *original* dates of members when extracting them.  If
     you do not specify this modifier, files extracted from the archive
     are stamped with the time of extraction.

`s'
     Write an object-file index into the archive, or update an existing
     one, even if no other change is made to the archive.  You may use
     this modifier flag either with any operation, or alone.  Running
     `ar s' on an archive is equivalent to running `ranlib' on it.

`u'
     Normally, `ar r'... inserts all files listed into the archive.  If
     you would like to insert *only* those of the files you list that
     are newer than existing members of the same names, use this
     modifier.  The `u' modifier is allowed only for the operation `r'
     (replace).  In particular, the combination `qu' is not allowed,
     since checking the timestamps would lose any speed advantage from
     the operation `q'.

`v'
     This modifier requests the *verbose* version of an operation.  Many
     operations display additional information, such as filenames
     processed, when the modifier `v' is appended.

`V'
     This modifier shows the version number of `ar'.


File: binutils.info,  Node: ar-scripts,  Prev: ar-cmdline,  Up: ar

Controlling `ar' with a script
==============================

     ar -M [ <SCRIPT ]

   If you use the single command-line option `-M' with `ar', you can
control its operation with a rudimentary command language.  This form
of `ar' operates interactively if standard input is coming directly
from a terminal.  During interactive use, `ar' prompts for input (the
prompt is `AR >'), and continues executing even after errors.  If you
redirect standard input to a script file, no prompts are issued, and
`ar' abandons execution (with a nonzero exit code) on any error.

   The `ar' command language is *not* designed to be equivalent to the
command-line options; in fact, it provides somewhat less control over
archives.  The only purpose of the command language is to ease the
transition to GNU `ar' for developers who already have scripts written
for the MRI "librarian" program.

   The syntax for the `ar' command language is straightforward:
   * commands are recognized in upper or lower case; for example, `LIST'
     is the same as `list'.  In the following descriptions, commands are
     shown in upper case for clarity.

   * a single command may appear on each line; it is the first word on
     the line.

   * empty lines are allowed, and have no effect.

   * comments are allowed; text after either of the characters `*' or
     `;' is ignored.

   * Whenever you use a list of names as part of the argument to an `ar'
     command, you can separate the individual names with either commas
     or blanks.  Commas are shown in the explanations below, for
     clarity.

   * `+' is used as a line continuation character; if `+' appears at
     the end of a line, the text on the following line is considered
     part of the current command.

   Here are the commands you can use in `ar' scripts, or when using
`ar' interactively.  Three of them have special significance:

   `OPEN' or `CREATE' specify a "current archive", which is a temporary
file required for most of the other commands.

   `SAVE' commits the changes so far specified by the script.  Prior to
`SAVE', commands affect only the temporary copy of the current archive.

`ADDLIB ARCHIVE'
`ADDLIB ARCHIVE (MODULE, MODULE, ... MODULE)'
     Add all the contents of ARCHIVE (or, if specified, each named
     MODULE from ARCHIVE) to the current archive.

     Requires prior use of `OPEN' or `CREATE'.

`ADDMOD MEMBER, MEMBER, ... MEMBER'
     Add each named MEMBER as a module in the current archive.

     Requires prior use of `OPEN' or `CREATE'.

`CLEAR'
     Discard the contents of the current archive, cancelling the effect
     of any operations since the last `SAVE'.  May be executed (with no
     effect) even if  no current archive is specified.

`CREATE ARCHIVE'
     Creates an archive, and makes it the current archive (required for
     many other commands).  The new archive is created with a temporary
     name; it is not actually saved as ARCHIVE until you use `SAVE'.
     You can overwrite existing archives; similarly, the contents of any
     existing file named ARCHIVE will not be destroyed until `SAVE'.

`DELETE MODULE, MODULE, ... MODULE'
     Delete each listed MODULE from the current archive; equivalent to
     `ar -d ARCHIVE MODULE ... MODULE'.

     Requires prior use of `OPEN' or `CREATE'.

`DIRECTORY ARCHIVE (MODULE, ... MODULE)'
`DIRECTORY ARCHIVE (MODULE, ... MODULE) OUTPUTFILE'
     List each named MODULE present in ARCHIVE.  The separate command
     `VERBOSE' specifies the form of the output: when verbose output is
     off, output is like that of `ar -t ARCHIVE MODULE...'.  When
     verbose output is on, the listing is like `ar -tv ARCHIVE
     MODULE...'.

     Output normally goes to the standard output stream; however, if you
     specify OUTPUTFILE as a final argument, `ar' directs the output to
     that file.

`END'
     Exit from `ar', with a `0' exit code to indicate successful
     completion.  This command does not save the output file; if you
     have changed the current archive since the last `SAVE' command,
     those changes are lost.

`EXTRACT MODULE, MODULE, ... MODULE'
     Extract each named MODULE from the current archive, writing them
     into the current directory as separate files.  Equivalent to `ar -x
     ARCHIVE MODULE...'.

     Requires prior use of `OPEN' or `CREATE'.

`LIST'
     Display full contents of the current archive, in "verbose" style
     regardless of the state of `VERBOSE'.  The effect is like `ar tv
     ARCHIVE').  (This single command is a GNU `ld' enhancement, rather
     than present for MRI compatibility.)

     Requires prior use of `OPEN' or `CREATE'.

`OPEN ARCHIVE'
     Opens an existing archive for use as the current archive (required
     for many other commands).  Any changes as the result of subsequent
     commands will not actually affect ARCHIVE until you next use
     `SAVE'.

`REPLACE MODULE, MODULE, ... MODULE'
     In the current archive, replace each existing MODULE (named in the
     `REPLACE' arguments) from files in the current working directory.
     To execute this command without errors, both the file, and the
     module in the current archive, must exist.

     Requires prior use of `OPEN' or `CREATE'.

`VERBOSE'
     Toggle an internal flag governing the output from `DIRECTORY'.
     When the flag is on, `DIRECTORY' output matches output from `ar
     -tv '....

`SAVE'
     Commit your changes to the current archive, and actually save it
     as a file with the name specified in the last `CREATE' or `OPEN'
     command.

     Requires prior use of `OPEN' or `CREATE'.


File: binutils.info,  Node: nm,  Next: objcopy,  Prev: ar,  Up: Top

nm
**

     nm [ -a | --debug-syms ]  [ -g | --extern-only ]
        [ -B ]  [ -C | --demangle ]
        [ -s | --print-armap ]  [ -A | -o | --print-file-name ]
        [ -n | -v | --numeric-sort ]  [ -p | --no-sort ]
        [ -r | --reverse-sort ]  [ -u | --undefined-only ]
        [ -t RADIX | --radix=RADIX ] [ -P | --portability ]
        [ --target=BFDNAME ] [ -f FORMAT | --format=FORMAT ]
        [ -V | --version ]  [ --help ]  [ OBJFILE... ]

   GNU `nm' lists the symbols from object files OBJFILE....  If no
object files are listed as arguments, `nm' assumes `a.out'.

   For each symbol, `nm' shows:

   * The symbol value, in the radix selected by options (see below), or
     hexadecimal by default.

   * The symbol type.  At least the following types are used; others
     are, as well, depending on the object file format.  If lowercase,
     the symbol is local; if uppercase, the symbol is global (external).

    `A'
          Absolute.

    `B'
          BSS (uninitialized data).

    `C'
          Common.

    `D'
          Initialized data.

    `I'
          Indirect reference.

    `T'
          Text (program code).

    `U'
          Undefined.

   * The symbol name.

   The long and short forms of options, shown here as alternatives, are
equivalent.

`-A'
`-o'
`--print-file-name'
     Precede each symbol by the name of the input file (or archive
     element) in which it was found, rather than identifying the input
     file once only, before all of its symbols.

`-a'
`--debug-syms'
     Display all symbols, even debugger-only symbols; normally these
     are not listed.

`-B'
     The same as `--format=bsd' (for compatibility with the MIPS `nm').

`-C'
`--demangle'
     Decode ("demangle") low-level symbol names into user-level names.
     Besides removing any initial underscore prepended by the system,
     this makes C++ function names readable.  *Note c++filt::, for more
     information on demangling.

`-f FORMAT'
`--format=FORMAT'
     Use the output format FORMAT, which can be `bsd', `sysv', or
     `posix'.  The default is `bsd'.  Only the first character of
     FORMAT is significant; it can be either upper or lower case.

`-g'
`--extern-only'
     Display only external symbols.

`-n'
`-v'
`--numeric-sort'
     Sort symbols numerically by their addresses, rather than
     alphabetically by their names.

`-p'
`--no-sort'
     Do not bother to sort the symbols in any order; print them in the
     order encountered.

`-P'
`--portability'
     Use the POSIX.2 standard output format instead of the default
     format.  Equivalent to `-f posix'.

`-s'
`--print-armap'
     When listing symbols from archive members, include the index: a
     mapping (stored in the archive by `ar' or `ranlib') of which
     modules contain definitions for which names.

`-r'
`--reverse-sort'
     Reverse the order of the sort (whether numeric or alphabetic); let
     the last come first.

`-t RADIX'
`--radix=RADIX'
     Use RADIX as the radix for printing the symbol values.  It must be
     `d' for decimal, `o' for octal, or `x' for hexadecimal.

`--target=BFDNAME'
     Specify an object code format other than your system's default
     format.  *Note objdump::, for information on listing available
     formats.

`-u'
`--undefined-only'
     Display only undefined symbols (those external to each object
     file).

`-V'
`--version'
     Show the version number of `nm' and exit.

`--help'
     Show a summary of the options to `nm' and exit.


File: binutils.info,  Node: objcopy,  Next: objdump,  Prev: nm,  Up: Top

objcopy
*******

     objcopy [ -F FORMAT | --format=FORMAT ]
             [ -I FORMAT | --input-format=FORMAT ]
             [ -O FORMAT | --output-format=FORMAT ]
             [ -S | --strip-all ]  [ -g | --strip-debug ]
             [ -x | --discard-all ]  [ -X | --discard-locals ]
             [ -v | --verbose ]  [ -V | --version ]  [ --help ]
             INFILE [OUTFILE]

   The GNU `objcopy' utility copies the contents of an object file to
another.  `objcopy' uses the GNU BFD Library to read and write the
object files.  It can write the destination object file in a format
different from that of the source object file.  The exact behavior of
`objcopy' is controlled by command-line options.

   `objcopy' creates temporary files to do its translations and deletes
them afterward.  `objcopy' uses BFD to do all its translation work; it
knows about all the formats BFD knows about, and thus is able to
recognize most formats without being told explicitly.  *Note BFD:
(ld.info)BFD the GNU linker.

`INFILE'
`OUTFILE'
     The source and output files respectively.  If you do not specify
     OUTFILE, `objcopy' creates a temporary file and destructively
     renames the result with the name of the input file.

`-I FORMAT'
`--input-format=FORMAT'
     Consider the source file's object format to be FORMAT, rather than
     attempting to deduce it.

`-O FORMAT'
`--output-format=FORMAT'
     Write the output file using the object format FORMAT.

`-F FORMAT'
`--format=FORMAT'
     Use FORMAT as the object format for both the input and the output
     file; i.e. simply transfer data from source to destination with no
     translation.

`-S'
`--strip-all'
     Do not copy relocation and symbol information from the source file.

`-g'
`--strip-debug'
     Do not copy debugging symbols from the source file.

`-x'
`--discard-all'
     Do not copy non-global symbols from the source file.

`-X'
`--discard-locals'
     Do not copy compiler-generated local symbols.  (These usually
     start with `L' or `.'.)

`-V'
`--version'
     Show the version number of `objcopy'.

`-v'
`--verbose'
     Verbose output: list all object files modified.  In the case of
     archives, `objcopy -V' lists all members of the archive.

`--help'
     Show a summary of the options to `objcopy'.


File: binutils.info,  Node: objdump,  Next: ranlib,  Prev: objcopy,  Up: Top

objdump
*******

     objdump [ -a ]  [ -b BFDNAME ]  [ -d ]  [ -f ]
             [ -h | --header ]  [ -i ]  [ -j SECTION ]  [ -l ]
             [ -m MACHINE ]  [ -r | --reloc ]  [ -s ]  [ --stabs ]
             [ -t | --syms ]  [ -x ]  [ --version ]  [ --help ]
             OBJFILE...

   `objdump' displays information about one or more object files.  The
options control what particular information to display.  This
information is mostly useful to programmers who are working on the
compilation tools, as opposed to programmers who just want their
program to compile and work.

   OBJFILE... are the object files to be examined.  When you specify
archives, `objdump' shows information on each of the member object
files.

   The long and short forms of options, shown here as alternatives, are
equivalent.  At least one option besides `-l' must be given.

`-a'
     If any of the OBJFILE files are archives, display the archive
     header information (in a format similar to `ls -l').  Besides the
     information you could list with `ar tv', `objdump -a' shows the
     object file format of each archive member.

`-b BFDNAME'
     Specify that the object-code format for the object files is
     BFDNAME.  This option may not be necessary; OBJDUMP can
     automatically recognize many formats.

     For example,
          objdump -b oasys -m vax -h fu.o

     displays summary information from the section headers (`-h') of
     `fu.o', which is explicitly identified (`-m') as a VAX object file
     in the format produced by Oasys compilers.  You can list the
     formats available with the `-i' option.

`-d'
     Disassemble.  Display the assembler mnemonics for the machine
     instructions from OBJFILE.

`-f'
     File header.  Display summary information from the overall header
     of each of the OBJFILE files.

`-h'
`--header'
     Header.  Display summary information from the section headers of
     the object file.

`--help'
     Print a summary of the options to `objdump' and exit.

`-i'
     Display a list showing all architectures and object formats
     available for specification with `-b' or `-m'.

`-j NAME'
     Display information only for section NAME.

`-l'
     Label the display (using debugging information) with the source
     filename and line numbers corresponding to the object code shown.

`-m MACHINE'
     Specify that the object files OBJFILE are for architecture
     MACHINE.  You can list available architectures using the `-i'
     option.

`-r'
`--reloc'
     Relocation.  Print the relocation entries of the file.

`-s'
     Display the full contents of any sections requested.

`--stabs'
     Display the full contents of any sections requested.  Display the
     contents of the .stab and .stab.index and .stab.excl sections from
     an ELF file.  This is only useful on systems (such as Solaris 2.0)
     in which `.stab' debugging symbol-table entries are carried in an
     ELF section.  In most other file formats, debugging symbol-table
     entries are interleaved with linkage symbols, and are visible in
     the `--syms' output.

`-t'
`--syms'
     Symbol Table.  Print the symbol table entries of the file.  This
     is similar to the information provided by the `nm' program.

`--version'
     Print the version number of `objdump' and exit.

`-x'
     Display all available header information, including the symbol
     table and relocation entries.  Using `-x' is equivalent to
     specifying all of `-a -f -h -r -t'.


File: binutils.info,  Node: ranlib,  Next: size,  Prev: objdump,  Up: Top

ranlib
******

     ranlib [-vV] ARCHIVE

   `ranlib' generates an index to the contents of an archive and stores
it in the archive.  The index lists each symbol defined by a member of
an archive that is a relocatable object file.

   You may use `nm -s' or `nm --print-armap' to list this index.

   An archive with such an index speeds up linking to the library and
allows routines in the library to call each other without regard to
their placement in the archive.

   The GNU `ranlib' program is another form of GNU `ar'; running
`ranlib' is completely equivalent to executing `ar -s'.  *Note ar::.

`-v'
`-V'
     Show the version number of `ranlib'.


File: binutils.info,  Node: size,  Next: strings,  Prev: ranlib,  Up: Top

size
****

     size [ -A | -B | --format=COMPATIBILITY ]
          [ --help ]  [ -d | -o | -x | --radix=NUMBER ]
          [ --target=BFDNAME ]  [ -V | --version ]
          OBJFILE...

   The GNU `size' utility lists the section sizes--and the total
size--for each of the object or archive files OBJFILE in its argument
list.  By default, one line of output is generated for each object file
or each module in an archive.

   OBJFILE... are the object files to be examined.

   The command line options have the following meanings:

`-A'
`-B'
`--format=COMPATIBILITY'
     Using one of these options, you can choose whether the output from
     GNU `size' resembles output from System V `size' (using `-A', or
     `--format=sysv'), or Berkeley `size' (using `-B', or
     `--format=berkeley').  The default is the one-line format similar
     to Berkeley's.

     Here is an example of the Berkeley (default) format of output from
     `size':
          size --format Berkeley ranlib size
          text    data    bss     dec     hex     filename
          294880  81920   11592   388392  5ed28   ranlib
          294880  81920   11888   388688  5ee50   size

     This is the same data, but displayed closer to System V
     conventions:

          size --format SysV ranlib size
          ranlib  :
          section         size         addr
          .text         294880         8192
          .data          81920       303104
          .bss           11592       385024
          Total         388392
          
          
          size  :
          section         size         addr
          .text         294880         8192
          .data          81920       303104
          .bss           11888       385024
          Total         388688

`--help'
     Show a summary of acceptable arguments and options.

`-d'
`-o'
`-x'
`--radix=NUMBER'
     Using one of these options, you can control whether the size of
     each section is given in decimal (`-d', or `--radix=10'); octal
     (`-o', or `--radix=8'); or hexadecimal (`-x', or `--radix=16').
     In `--radix=NUMBER', only the three values (8, 10, 16) are
     supported.  The total size is always given in two radices; decimal
     and hexadecimal for `-d' or `-x' output, or octal and hexadecimal
     if you're using `-o'.

`--target=BFDNAME'
     Specify that the object-code format for OBJFILE is BFDNAME.  This
     option may not be necessary; `size' can automatically recognize
     many formats.  *Note objdump::, for information on listing
     available formats.

`-V'
`--version'
     Display the version number of `size'.


File: binutils.info,  Node: strings,  Next: strip,  Prev: size,  Up: Top

strings
*******

     strings [-afov] [-MIN-LEN] [-n MIN-LEN] [-t RADIX] [-]
             [--all] [--print-file-name] [--bytes=MIN-LEN]
             [--radix=RADIX] [--help] [--version] FILE...

   For each FILE given, GNU `strings' prints the printable character
sequences that are at least 4 characters long (or the number given with
the options below) and are followed by a NUL or newline character.  By
default, it only prints the strings from the initialized data sections
of object files; for other types of files, it prints the strings from
the whole file.

   `strings' is mainly useful for determining the contents of non-text
files.

`-a'
`--all'
`-'
     Do not scan only the initialized data section of object files; scan
     the whole files.

`-f'
`--print-file-name'
     Print the name of the file before each string.

`--help'
     Print a summary of the program usage on the standard output and
     exit.

`-MIN-LEN'
`-n MIN-LEN'
`--bytes=MIN-LEN'
     Print sequences of characters that are at least MIN-LEN characters
     long, instead of the default 4.

`-o'
     Like `-t o'.  Some other versions of `strings' have `-o' act like
     `-t d' instead.  Since we can not be compatible with both ways, we
     simply chose one.

`-t RADIX'
`--radix=RADIX'
     Print the offset within the file before each string.  The single
     character argument specifies the radix of the offset--`o' for
     octal, `x' for hexadecimal, or `d' for decimal.

`-v'
`--version'
     Print the program version number on the standard output and exit.


File: binutils.info,  Node: strip,  Next: c++filt,  Prev: strings,  Up: Top

strip
*****

     strip [ -F FORMAT | --format=FORMAT | --target=FORMAT ]
           [ -I FORMAT | --input-format=FORMAT ]
           [ -O FORMAT | --output-format=FORMAT ]
           [ -s | --strip-all ] [ -S | -g | --strip-debug ]
           [ -x | --discard-all ] [ -X | --discard-locals ]
           [ -v | --verbose ]  [ -V | --version ]  [ --help ]
           OBJFILE...

   GNU `strip' discards all symbols from object files OBJFILE.  The
list of object files may include archives.  At least one object file
must be given.

   `strip' modifies the files named in its argument, rather than
writing modified copies under different names.

`-F FORMAT'
`--format=FORMAT'
`--target=FORMAT'
     Treat the original OBJFILE as a file with the object code format
     FORMAT, and rewrite it in the same format.

`--help'
     Show a summary of the options to `strip' and exit.

`-I FORMAT'
`--input-format=FORMAT'
     Treat the original OBJFILE as a file with the object code format
     FORMAT.

`-O FORMAT'
`--output-format=FORMAT'
     Replace OBJFILE with a file in the output format FORMAT.

`-s'
`--strip-all'
     Remove all symbols.

`-g'
`-S'
`--strip-debug'
     Remove debugging symbols only.

`-x'
`--discard-all'
     Remove non-global symbols.

`-X'
`--discard-locals'
     Remove compiler-generated local symbols.  (These usually start
     with `L' or `.'.)

`-V'
`--version'
     Show the version number for `strip'.

`-v'
`--verbose'
     Verbose output: list all object files modified.  In the case of
     archives, `strip -v' lists all members of the archive.


File: binutils.info,  Node: c++filt,  Next: Index,  Prev: strip,  Up: Top

c++filt
*******

     c++filt [ -_ | --strip-underscores ]
             [ -s FORMAT | --format=FORMAT ]
             [ --help ]  [ --version ]  [ SYMBOL... ]

   The C++ language provides function overloading, which means that you
can write many functions with the same name (providing each takes
parameters of different types).  All C++ function names are encoded
into a low-level assembly label (this process is known as "mangling").
The `c++filt' program does the inverse mapping: it decodes
("demangles") low-level names into user-level names so that the linker
can keep these overloaded functions from clashing.

   Every alphanumeric word (consisting of letters, digits, underscores,
dollars, or periods) seen in the input is a potential label.  If the
label decodes into a C++ name, the C++ name replaces the low-level name
in the output.

   You can use `c++filt' to decipher individual symbols:

     c++filt SYMBOL

   If no SYMBOL arguments are given, `c++filt' reads symbol names from
the standard input and writes the demangled names to the standard
output.  All results are printed on the standard output.

`-_'
`--strip-underscores'
     On some systems, both the C and C++ compilers put an underscore in
     front of every name.  For example, the C name `foo' gets the
     low-level name `_foo'.  This option removes the initial underscore.

`-s FORMAT'
`--format=FORMAT'
     GNU `nm' can decode three different methods of mangling, used by
     different C++ compilers.  The argument to this option selects which
     method it uses:

    `gnu'
          the one used by the GNU compiler (the default method)

    `lucid'
          the one used by the Lucid compiler

    `arm'
          the one specified by the C++ Annotated Reference Manual

`--help'
     Print a summary of the options to `c++filt' and exit.

`--version'
     Print the version number of `c++filt' and exit.

     *Warning:* `c++filt' is a new utility, and the details of its user
     interface are subject to change in future releases.  In particular,
     a command-line option may be required in the the future to decode
     a name passed as an argument on the command line; in other words,

          c++filt SYMBOL

     may in a future release become

          c++filt OPTION SYMBOL


File: binutils.info,  Node: Index,  Prev: c++filt,  Up: Top

Index
*****

* Menu:

* .stab:                                objdump.
* ar compatibility:                     ar.
* nm compatibility:                     nm.
* nm compatibility:                     nm.
* nm format:                            nm.
* nm format:                            nm.
* size display format:                  size.
* size number format:                   size.
* all header information, object file:  objdump.
* ar:                                   ar.
* architecture:                         objdump.
* architectures available:              objdump.
* archive contents:                     ranlib.
* archive headers:                      objdump.
* archives:                             ar.
* c++filt:                              c++filt.
* collections of files:                 ar.
* compatibility, ar:                    ar.
* contents of archive:                  ar-cmdline.
* creating archives:                    ar-cmdline.
* dates in archive:                     ar-cmdline.
* debug symbols:                        objdump.
* debugging symbols:                    nm.
* deleting from archive:                ar-cmdline.
* demangling C++ symbols:               c++filt.
* demangling C++ symbols:               nm.
* disassembling object code:            objdump.
* discarding symbols:                   strip.
* ELF object file format:               objdump.
* external symbols:                     nm.
* external symbols:                     nm.
* extract from archive:                 ar-cmdline.
* file name:                            nm.
* header information, all:              objdump.
* input file name:                      nm.
* libraries:                            ar.
* listings strings:                     strings.
* machine instructions:                 objdump.
* moving in archive:                    ar-cmdline.
* MRI compatibility, ar:                ar-scripts.
* name duplication in archive:          ar-cmdline.
* name length:                          ar.
* nm:                                   nm.
* objdump:                              objdump.
* object code format:                   nm.
* object code format:                   objdump.
* object code format:                   size.
* object file header:                   objdump.
* object file information:              objdump.
* object file sections:                 objdump.
* object formats available:             objdump.
* operations on archive:                ar-cmdline.
* printing from archive:                ar-cmdline.
* printing strings:                     strings.
* quick append to archive:              ar-cmdline.
* radix for section sizes:              size.
* ranlib:                               ranlib.
* relative placement in archive:        ar-cmdline.
* relocation entries, in object file:   objdump.
* removing symbols:                     strip.
* repeated names in archive:            ar-cmdline.
* replacement in archive:               ar-cmdline.
* scripts, ar:                          ar-scripts.
* section headers:                      objdump.
* section information:                  objdump.
* section sizes:                        size.
* sections, full contents:              objdump.
* size:                                 size.
* sorting symbols:                      nm.
* source file name:                     nm.
* source filenames for object files:    objdump.
* stab:                                 objdump.
* strings:                              strings.
* strings, printing:                    strings.
* strip:                                strip.
* symbol index:                         ranlib.
* symbol index:                         ar.
* symbol index, listing:                nm.
* symbol table entries, printing:       objdump.
* symbols:                              nm.
* symbols, discarding:                  strip.
* undefined symbols:                    nm.
* Unix compatibility, ar:               ar-cmdline.
* updating an archive:                  ar-cmdline.
* version:                              Top.
* writing archive index:                ar-cmdline.



Tag Table:
Node: Top918
Node: ar1769
Node: ar-cmdline3935
Node: ar-scripts10370
Node: nm16051
Node: objcopy19624
Node: objdump21994
Node: ranlib25572
Node: size26306
Node: strings28993
Node: strip30625
Node: c++filt32286
Node: Index34647

End Tag Table