2005-03-25 Anthony Green * tree.c (parse_reg_property): Fix memset usage. 2005-03-23 Mark Kettenis * configure: Regenerate. 2005-01-11 Andrew Cagney * configure.ac: Delete AC_CONFIG_AUX_DIR. * configure: Re-generate. 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. 2005-01-03 Andreas Schwab * Makefile.in (hw_com.o, hw_eeprom.o): Depend on $(DEVICE_TABLE_H). 2004-11-16 Andreas Schwab * Makefile.in (defines.h): Depend on tmp-defines. (hw.c hw.h): Depend on tmp-hw. (pk.h): Depend on tmp-pk. 2004-11-11 Andreas Schwab * sim_calls.c: Include "libiberty.h". 2004-09-24 Ian Lance Taylor Committed by Andrew Cagney. * configure.in: Check for sys/mount.h, sys/vfs.h, sys/statfs.h. Check for struct statfs. * emul_netbsd.c: If not HAVE_STRUCT_STATFS, #undef HAVE_FSTATFS. * configure, config.in: Regenerate. 2004-08-05 Nathanael Nerode * Makefile.in (GDB_INCLUDES): Remove bogus reference to mmalloc. 2004-08-04 Andrew Cagney Jim Blandy * sim_callbacks.h (simulator): Declare. * Makefile.in (gdb-sim.o): New rule. (MAIN_SRC, GDB_OBJ): Add gdb-sim.o, gdb-sim.c. (DEFS_H): Delete. (GDB_SIM_PPC_H): Define. * gdb-sim.c: New file. * sim_calls.c: Do not include "defs.h". (simulator): Drop static. (sim_store_register, sim_fetch_register): Delete. 2004-08-04 Andrew Cagney * Back out accidently committed change. 2004-08-04 Jim Blandy Use a fixed register numbering when communicating with the PowerPC simulator. * sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not include GDB's "defs.h". (gdb_register_name_table): New variable. (gdb_register_name_table_size): New enum constant. (gdb_register_name): New function. (sim_fetch_register, sim_store_register): Use gdb_register_name, instead of calling gdbarch_register_name. * Makefile.in (GDB_SIM_PPC_H): New variable. (DEFS_H): Delete variable. (sim_calls.o): Update dependencies. 2004-07-26 Andrew Cagney Problem from Olaf Hering . * Makefile.in (install, installdirs): Add DESTDIR. 2004-07-10 Ben Elliston * tree.c (parse_integer_property): Comment typo fix. 2004-07-06 Jim Blandy * Makefile.in: Update all dependency information. (BASICS_H, CPU_H, IDECODE_H, PSIM_H, REGISTERS_H, DEVICE_TABLE_H) (EMUL_GENERIC_H): Values updated. (ACCONFIG_H, ALTIVEC_EXPRESSION_H, ALTIVEC_REGISTERS_H) (ANSIDECL_H, BFD_H, BITS_H, CAP_H, COMMON_SIM_BASE_H) (COMMON_SIM_BASICS_H, COMMON_SIM_FPU_H, COMMON_SIM_INLINE_H) (COMMON_SIM_SIGNAL_H, CONFIG_H, COREFILE_H, COREFILE_N_H, DEBUG_H) (DEFINES_H, DEFS_H, DEVICE_H, E500_EXPRESSION_H, E500_REGISTERS_H) (EMUL_BUGAPI_H, EMUL_CHIRP_H, EMUL_NETBSD_H, EMUL_UNIX_H, EVENTS_H) (FILTER_FILENAME_H, FILTER_H, GDB_CALLBACK_H, GDB_REMOTE_SIM_H) (GEN_ICACHE_H, GEN_IDECODE_H, GEN_ITABLE_H, GEN_MODEL_H) (GEN_SEMANTICS_H, GEN_SUPPORT_H, HW_CPU_H, HW_H, HW_PHB_H) (ICACHE_H, IDECODE_BRANCH_H, IDECODE_EXPRESSION_H) (IDECODE_FIELDS_H, IGEN_H, INLINE_H, INTERRUPTS_H, ITABLE_H) (LD_CACHE_H, LD_DECODE_H, LD_INSN_H, LF_H, MISC_H, MODEL_H, MON_H) (OPTIONS_H, OS_EMUL_H, PK_H, PPC_CONFIG_H, SEMANTICS_H) (SIM_CALLBACKS_H, SIM_ENDIAN_H, SIM_ENDIAN_N_H, SIM_MAIN_H) (SPREG_H, STD_CONFIG_H, SUPPORT_H, TABLE_H, TARG_VALS_H, TCONFIG_H) (TREE_H, VM_H, VM_N_H, WORDS_H): New variables. (callback.o, cap.o, corefile.o, debug.o, device.o, device_table.o) (dgen.o, emul_bugapi.o, emul_chirp.o, emul_netbsd.o, emul_unix.o) (events.o, filter.o, filter_filename.o, filter_host.o) (gen-icache.o, gen-idecode.o, gen-itable.o, gen-model.o) (gen-semantics.o, gen-support.o, hw_core.o, hw_cpu.o, hw_disk.o) (hw_htab.o, hw_init.o, hw_phb.o, hw_register.o, icache.o) (idecode.o, igen.o, interrupts.o, itable.o, ld-cache.o) (ld-decode.o, ld-insn.o, lf.o, main.o, misc.o, model.o, mon.o) (options.o, os_emul.o, pk_disklabel.o, psim.o, registers.o) (semantics.o, sim-endian.o, sim-fpu.o, sim_calls.o, spreg.o) (support.o, table.o, targ-map.o, tree.o, vm.o): Update dependencies. 2004-06-28 Jim Blandy * e500_registers.h (EVR): Cast the 32-bit value of the GPR to an unsigned type before or-ing it with a 64-bit value. 2004-06-15 Alan Modra * hw_htab.c (htab_sum_binary(bfd): Use bfd_get_section_size instead of bfd_get_section_size_before_reloc. (htab_dma_binary(bfd): Likewise. * hw_init.c (update_for_binary_section(bfd): Likewise. 2004-05-10 Daniel Jacobowitz * configure.in (sim_fpu_cflags): Add -I../common. * configure: Regenerated. 2004-01-27 Andrew Cagney * ppc-instructions: Update copyright. (convert_to_integer): Add trailing ";" to label. 2003-10-16 Michael Snyder * emul_netbsd.c: Only a comment may follow an #endif. 2003-10-15 Michael Snyder * Makefile.in (sim_calls.o): No longer depends on gdb/tm.h. 2003-06-22 Andrew Cagney Written by matthew green , with fixes from Aldy Hernandez , Jim Wilson , and Nick Clifton . * ppc-instructions: Include altivec.igen and e500.igen. (model_busy, model_data): Add vr_busy and vscr_busy. (model_trace_release): Trace vr_busy and vscr_busy. (model_new_cycle): Update vr_busy and vscr_busy. (model_make_busy): Update vr_busy and vscr_busy. * registers.c (register_description): Add Altivec and e500 registers. * psim.c (psim_read_register, psim_read_register): Handle Altivec and e500 registers. * ppc-spr-table (SPEFSCR): Add VRSAVE and SPEFSCR registers. * configure.in (sim_filter): When *altivec* add "av". When *spe* or *simd* add e500. (sim_float): When *altivec* define WITH_ALTIVEC. When *spe* add WITH_E500. * configure: Re-generate. * e500.igen, altivec.igen: New files. * e500_expression.h, altivec_expression.h: New files. * idecode_expression.h: Update copyright. Include "e500_expression.h" and "altivec_expression.h". * e500_registers.h, altivec_registers.h: New files. * registers.h: Update copyright. Include "e500_registers.h" and "altivec_registers.h". (registers): Add Altivec and e500 specific registers. * Makefile.in (IDECODE_H): Add "idecode_e500.h" and "idecode_altivec.h". (REGISTERS_H): Add "e500_registers.h" and "altivec_registers.h". (tmp-igen): Add dependencies on altivec.igen and e500.igen . 2003-06-22 Andrew Cagney Problems reported by Joshua LeVasseur. * emul_chirp.c: Update copyright. (chirp_emul_nextprop): Return the first property. * hw_htab.c: Update copyright. (htab_decode_hash_table): Fix check for htab size. 2003-06-21 Andrew Cagney * interrupts.c: Update copyright. (external_interrupt): Fix test for already pending interrupt. Problem found by Joshua LeVasseur. * ppc-instructions: Add missing +8 line. Found by blofeldus at yahoo.com. 2003-06-21 Andrew Cagney From Ian Lance Taylor : * hw_nvram.c (hw_nvram_init_address): Correct call to memset--swap second and third arguments. 2003-06-21 Andrew Cagney * hw_com.c (hw_com_device_init_data): Check that the output, and not input file opened. Pointed out by masahino tky3.3web.ne.jp. 2003-06-20 Andrew Cagney * sim_calls.c (sim_create_inferior): Assert that psim_write_register succeeded. (sim_fetch_register, sim_store_register): Make "regname" constant. Delete Altivec hack. Return result from psim_read_register / psim_write_register. * psim.h (psim_read_register, psim_write_register): Change return type to int. Update comments. * psim.c: Update copyright. (psim_stack): Assert that the psim_read_register worked. (psim_read_register, psim_read_register): Return the register's size. Allocate the cooked buffer dynamically. * hw_register.c: Update copyright. (do_register_init): Check that psim_write_register succeeded. * hw_init.c: Update copyright. (create_ppc_elf_stack_frame, create_ppc_aix_stack_frame): Assert that the register transfer worked. 2003-06-19 Andrew Cagney * ld-insn.h: Update copyright. (cache_fields): Define. (insn_table_fields): Add insn_field_6 and insn_field_7. (load_insn_table): Pass in the "cache_rules". * ld-insn.c: Update copyright. (load_insn_table): Add parameter "cache_rules". Handle "cache", "computed" and "scratch" fields. (main): Pass "cache_rules" to load_insn_table. * ld-cache.h: Update copyright. (append_cache_table): Declare. * ld-cache.c: Update copyright. (append_cache_table): New function. (load_cache_table): Call. * gen-model.c: Include "ld-cache.h". * gen-itable.c: Include "ld-cache.h". * igen.c: Move #include "ld-cache.h" to earlier. Update copyright. (main): Permit a NULL "cache_rules". Pass address of "cache_rules" to load_insn_table. * Makefile.in (tmp-ld-insn): Add "ld-cache.o". (tmp-igen): Do not include ppc-cache-rules. (gen-itable.o, gen-model.o): Add "ld-cache.h". * ppc-cache-rules: Delete file. * ppc-instructions: Add cache rules. 2003-06-19 Andrew Cagney * Makefile.in (ICACHE_CFLAGS, SEMANTICS_CFLAGS): Delete. (SIM_FPU_FLAGS): Define. (icache.o): Delete explicit compile command. (semantics.o, idecode.o): Delete explicit compile command. (NOWARN_CFLAGS, STD_CFLAGS): Append SIM_FPU_CFLAGS. * gen-support.c (gen_support_c): Generate #include of "sim-inline.h" and "sim-fpu.h", but conditional on HAVE_COMMON_FPU. * gen-idecode.c (gen_idecode_c): Ditto. * igen.c (gen_icache_c, gen_semantics_c): Wrap #include of "sim-inline.h" and "sim-fpu.h" in HAVE_COMMON_FPU conditional. Move to before "support.h". * Makefile.in, gen-support.c, gen-idecode.c, igen.c: Update copyright. 2003-05-16 Ian Lance Taylor * Makefile.in (various): Use $(SHELL) whenever we invoke move-if-change. 2003-02-27 Andrew Cagney * sim_calls.c (sim_open, sim_create_inferior): Rename _bfd to bfd. 2002-09-27 Andrew Cagney * hw_disk.c (hw_disk_init_address): Set device type to "block", not "disk". 2002-06-22 Andrew Cagney * Makefile.in (INTL_SRC): Define. (INTL_CFLAGS): Define. (INTL_DIR): Define. (STD_CFLAGS): Add INTL_CFLAGS. 2002-06-17 Elena Zannoni * psim.c (psim_options): Don't choke when gdb invokes us with the --architecture option, just ignore it. 2002-06-16 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. 2002-06-08 Andrew Cagney * main.c: Include "gdb/callback.h" and "gdb/remote-sim.h". * sim_calls.c: Ditto. 2002-05-30 DJ Delorie * lf.c (lf_print__gnu_copyleft): Convert multiline strings to compatible format. * gen-idecode.c (print_run_until_stop_body): Likewise. * gen-model.c (gen_model_c): Likewise. 2002-04-15 Elena Zannoni * sim_calls.c (sim_fetch_register, sim_store_register): Return -1 for AltiVec registers as a temporary stopgap. 2002-03-24 David O'Brien * ppc/hw_disk.c: Export a disk device property. 2002-03-23 Andrew Cagney From 2001-12-09 Julien Ducourthial : * ppc-instructions (lswx): Do the register control with the register count. Initialize the right register in the loop. (mtfsfi) : Correct prefix for the instruction. 2002-02-24 Andrew Cagney From wiz at danbala: * std-config.h: Fix grammar and typos. Update copyright. Fix PR gdb/287. 2002-01-12 matthew green * Makefile.in (tmp-igen): Pass -I $(srcdir) to igen. * igen.c (main): Change -I to add include paths for :include: files. Implement -G as per sim/igen, with just gen-icache=N support. Call load_insn_table() with the built include path. * ld-insn.c (parse_include_entry): New. Load an :include: file. (load_insn_table): New `includes' argument. Look for :include: entries and call parse_include_entry() for them. (main): Adjust load_insn_table() call. * ld-insn.h (model_include_fields): New enum. (load_insn_table): Update prototype. * table.c (struct _open_table, struct _table): Rework structures to handle included files. (table_push): Move the guts of table_open() here. * table.c (struct _open table, struct table): Make table object an indirect ptr to the current table file. (current_line, new_table_entry, next_line): Make file arg type open_table. (table_open): Use table_push. (table_entry_read): Point variable file at current table, at eof, pop last open table. * misc.h (NZALLOC): New macro. From sim/igen. * table.h, table.c (table_push): New function. 2002-01-04 matthew green * bits.c (LSMASKED64): New inline function. (LSEXTRACTED64): Likewise. * bits.h (_LSB_POS, _LSMASKn, LSMASK64): New macros from sim/common/sim-bits.h (LSMASKED64, LSEXTRACTED64): New functions definitions. * Makefile.in (sim-bits.o): Remove target. * main.c (zalloc): Fix typo in error message. 2001-12-16 Andrew Cagney * configure.in (sim_fpu): Don't add sim-bits.o. * configure: Re-generate. 2001-12-15 matthew green * main.c: Include "defs.h", "bfd.h", "callback.h" and "remote-sim.h". (sim_io_error): New function. * sim_calls.c: (sim_io_error): New function. 2001-12-14 matthew green * Makefile.in (LIB_OBJ): Add @sim_fpu@. (ICACHE_CFLAGS, SEMANTICS_CFLAGS): New variables. (icache.o, semantics.o): Add new ICACHE_FLAGS & SEMANTICS_FLAGS. (sim-fpu.o, sim-bits.o, tconfig.h): New targets. * configure.in: Rename INLINE_LOCALS to PSIM_INLINE_LOCALS. Add a check for sim/common/sim-fpu.c. Output sim_fpu and sim_fpu_cflags. * configure: Regenerate. * device.h (device_find_integer_array_property): Match function definition. * gen-icache.c (print_icache_internal_function_declaration): Rename INLINE_ICACHE to PSIM_INLINE_ICACHE. * gen-idecode.c (print_idecode_run_function_header): Rename INLINE_IDECODE to PSIM_INLINE_IDECODE. * gen-semantics.c (print_semantic_function_header): Rename EXTERN_SEMANTICS to PSIM_EXTERN_SEMANTICS. * gen-support.c (print_support_function_name): Rename INLINE_SUPPORT to PSIM_INLINE_SUPPORT. * igen.c (print_function_name): Also escape `(' and `)'. (gen_semantics_h): Rename EXTERN_SEMANTICS to PSIM_EXTERN_SEMANTICS. (gen_semantics_c): Likewise. Also output includes for "sim-fpu.h" * inline.h (INLINE_SIM_ENDIAN): Renamed INLINE_PSIM_ENDIAN. (EXTERN_SIM_ENDIAN): Renamed EXTERN_PSIM_ENDIAN. (STATIC_INLINE_SIM_ENDIAN): Renamed STATIC_INLINE_PSIM_ENDIAN. (INLINE_LOCALS): Renamed PSIM_INLINE_LOCALS. (EXTERN_SUPPORT): Renamed PSIM_EXTERN_SUPPORT. (INLINE_SUPPORT): Renamed PSIM_INLINE_SUPPORT. (EXTERN_SEMANTICS): Renamed PSIM_EXTERN_SEMANTICS. (INLINE_SEMANTICS): Renamed PSIM_INLINE_SEMANTICS. (EXTERN_IDECODE): Renamed PSIM_EXTERN_IDECODE. (INLINE_IDECODE): Renamed PSIM_INLINE_IDECODE. (EXTERN_ICACHE): Renamed PSIM_EXTERN_ICACHE. (INLINE_ICACHE): Renamed PSIM_INLINE_ICACHE. * options.c (options_inline): Fix names. * sim-endian-n.h: Change INLINE_SIM_ENDIAN to INLINE_PSIM_ENDIAN. * sim-endian.h: Likewise. * sim-main.h: New file. * std-config.h: Rename INLINE_LOCALS to PSIM_INLINE_LOCALS. 2001-12-01 Andrew Cagney From Mark Peek. * ppc-spr-table: Add SDA and PIR. 2001-10-29 Andrew Cagney * tree.c (parse_size): Assert #size-cells > 0. (parse_address): Ditto for #address-cells. (parse_reg_property): Only parse the size when #size-cells is non-zero. 2001-10-25 Andrew Cagney * emul_generic.c (OEA_MEMORY_SIZE): Increase to 4mb. * hw_htab.c (htab_map_binary): Don't try to map the text section when it is empty. * emul_chirp.c (map_over_chirp_note): Default load-base to -1 not CHIRP_LOAD_BASE. (emul_chirp_create): Map in the interrupt table. 2001-07-16 Daniel Jacobowitz * Makefile.in: Add dependencies on $(CPU_H). Wed Mar 7 10:45:12 HST 2001 Glen Nakamura * hw_init.c (dma_file): Fixed problem with loading last 1KB of file. 2001-03-04 Andrew Cagney * emul_netbsd.c [WITH_NetBSD_HOST]: Include and . (do_stat): Only do SYS test when SYS_stat defined. (do_sigprocmask): Ditto for SYS_sigprocmask. (do_fstat): Ditto for SYS_fstat. (do_getdirentries): Ditto for SYS_getdirentries. (do_lstat): Ditto for SYS_lstat. 2001-01-15 Geoffrey Keating * emul_netbsd.c (do_open): Translate the flag parameter to the open syscall to the numbers supported by the host. 2000-12-12 Geoffrey Keating * sim-endian.h: Don't have parameters on macro definitions which are simply renaming functions, to permit use of XCONCAT2 in both the macro name and the arguments in a use of such a definition. 2000-11-15 Jim Blandy * sim_calls.c: Doc fix. (sim_fetch_register, sim_store_register): Call gdbarch_register_name directly, instead of going through REGISTER_NAME macro. 2000-10-24 Geoff Keating * ppc-instructions (lfsux): Correct XO field of lfsux instruction. Tue May 23 21:39:23 2000 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Apr 28 15:59:27 2000 Andrew Cagney * events.c (event_queue_process): Call update_time_from_event every time an event is removed from the queue. (update_time_from_event): Delete assertion that a negative time_from_event implies an empty event queue. Fri Apr 28 15:53:54 2000 Andrew Cagney * interrupts.c (deliver_hardware_interrupt): Print time trace in decimal. * events.c (event_queue_process): Cleanup trace message. (update_time_from_event): Trace full event queue. 2000-03-25 Geoff Keating * ppc-instructions (Disabled_Exponent_Underflow): Increment the exponent when denormalizing. Thu Sep 2 18:15:53 1999 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. 1999-05-08 Felix Lee * configure.in: Use AC_EXEEXT instead of AM_EXEEXT. * configure: Regenerated to track ../common/aclocal.m4 changes. 1999-04-02 Keith Seitz * sim_calls.c (POLL_QUIT_INTERVAL): Define. Used to tweak the frequency at which the poll_quit callback is called. (poll_quit_count): New global. (sim_io_poll_quit): Only call the poll_quit callback after the specified POLL_QUIT_INTERVAL. 1999-02-22 Jim Lemke * dc-complex: Force expansion on all bits of field BO. Previously, the least-significant (prediction) bit was ignored. * ppc-instructions (conditional branches): Implement mpc860c0 option. * igen.c (gen_semantics_[ch]): Setup for mpc860c0 option. * psim.c (is_num, psim_options): Added parsing for mpc860c0 option. * interrupts.h: Added "mpc860c0_instruction_program_interrupt". * interrupts.c (program_interrupt): Added handling for above interrupt. 1999-02-01 Jim Blandy Make the simulator compatible with the MPC750. It would be nicer to make this a real multi-sim, but that's more work than we have time for. * emul_generic.c (emul_add_tree_options): Only require strict alignment if it was explicitly requested at configuration time. Don't make it the default for little-endian machines. * ppc-spr-table (UMMCR0, UMMCR1, UPMC1, UPMC2, USIA, UPMC3, UPMC4, MMCR0, PMC1, PMC2, SIA, MMCR1, PMC3, PMC4, L2CR, ICTC, THRM1, THRM2, THRM3): Plop in the MPC750 SPR registers. (DABR): This is weird. This was HID5, but the PPC spec says this should be DABR; why did some random processor use it for something else? The HID5 entry dates back to the original checkin of the simulator code in 1995, so remove it. * sim_calls.c (register_names): Delete this; since the user can now change GDB's list of register names dynamically, we can't pretend there's a static mapping here. (sim_fetch_register, sim_store_register): Call GDB's REGISTER_NAME function to get the register name. That ought to be accurate. However, we're changing a compile-time dependency (using the REGISTER_NAMES macro) into a link- and run-time dependency (calling REGISTER_NAME, which happens to be a function call on the PPC). 1999-01-22 Jim Lemke * igen.c(gen_semantics_[ch]): setup/use of new option (-o mpc860c0[=n]). interrupts.[ch](mpc860c0_instruction_program_interrupt): added. ppc-instructions(the four branch insn groups): detect problematic br's. psim.c(is_num - added, psim_options): Parse and init new option. These changes are currently under #ifdef WITH_OPTION_MPC860C0. 1998-12-01 Ken Raeburn * hw_nvram.c (hw_nvram_bcd): Force value to fit in 0..99. Fri Nov 20 12:17:28 1998 Andrew Cagney * main.c (sim_io_poll_quit): Stub function. * events.c (SIM_EVENTS_POLL_RATE): Define. (sim_events_poll): Copy function from common/sim-events.c. (event_queue_init): Copy scheduling of sim_events_poll from same. * sim_callbacks.h, sim_calls.c (sim_io_poll_quit): New function, poll the external environment. 1998-11-19 Michael Meissner * ppc-instructions (is_{NaN,inf}): Use unsigned64 to get the fractional type, so that quiet NaN's aren't treated like Infinities. Mon Sep 28 09:42:45 1998 Drew Moseley * table.c (table_open): For cygwin hosts, we need to use the return value from the read routine as the number of bytes to process. This apparently is due to text-mode vs binary-mode. If the mounts are done text-mode, then the size returnedby fstat() may be different than the number of bytes "read" in text mode. Sun Oct 4 00:50:47 1998 Felix Lee * emul_netbsd.c (do_open): fix order-of-evaluation problem. (do_close): ditto. (do_fstat): ditto. (do_lstat): ditto. 1998-09-03 Michael Meissner * emul_{netbsd,unix}.c: Update copyright year. Mon Jun 29 10:57:36 1998 Michael Snyder * sim_calls.c (sim_fetch_register, sim_store_register): return zero when nothing to do. 1998-06-26 Michael Meissner * configure.in (AC_CHECK_HEADERS): Don't check for sys/mount.h. * configure: Regenerate. * emul_{netbsd,unix}.c (toplevel): No longer try to include sys/mount.h. It conflicts on Linux when gnu libc2 is used. Tue May 12 12:10:33 PDT 1998 James Ingham * Makefile.in: The run target depended on a target psim$(EXEEXT), but there was no such target, only plain psim. So I changed the run target to depend on psim. Sat May 2 01:10:12 1998 Stu Grossman * aclocal.m4: Remove defs of AM_EXEEXT and AM_CYGWIN32. These are now defined in ../common/aclocal.m4, and the double definition causes problems with AC_SUBST of EXEEXT. * configure: Regenerate. Wed Apr 29 15:44:52 1998 Geoffrey Noer * aclocal.m4: new file for AM_EXEEXT macro * configure.in: call AM_EXEEXT * configure: regenerate with autoconf 2.12.1. * Makefile.in: add EXEEXT support Sun Apr 26 15:31:55 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Sun Apr 26 15:19:51 1998 Tom Tromey * acconfig.h: New file. * configure.in: Reverted change of Apr 24; use sinclude again. Don't call AC_C_CROSS. Fri Apr 24 14:16:40 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Fri Apr 24 11:18:46 1998 Tom Tromey * Makefile.in (top_builddir): New macro. (INTLLIBS): New macro. (INTLDEPS): Likewise. (psim): Depend on INTLDEPS; link against INTLLIBS. * configure.in: Call CY_GNU_GETTEXT. Wed Apr 22 14:28:48 1998 Michael Meissner * configure: Regenerate with autoconf 2.12.1. Fri Mar 13 09:25:58 1998 Andrew Cagney * psim.c (psim_read_register, psim_write_register): Handle updates for FPSCR. * registers.c (register_description): Reconize "FPSCR". * emul_netbsd.c (emul_netbsd_create): When FP available, enable MSR FP exception mode. Do not enable FPSCR bits. * emul_unix.c (emul_unix_create): Ditto. Tue Feb 17 12:48:58 1998 Andrew Cagney * sim_calls.c (sim_store_register, sim_fetch_register): Pass in length parameter. Return -1. Mon Feb 9 14:13:14 1998 Andrew Cagney * ppc-instructions (fdiv, fdivs): Check for divide by zero. (is_invalid_zero_divide, invalid_zero_divide_operation): New functions. Wed Dec 10 17:38:28 1997 Andrew Cagney * sim_calls.c (sim_load): Do not parse PROG using buildargv, use raw value instead. 1997-11-05 Felix Lee * emul_chirp.c: #ifdef HAVE_UNISTD_H Wed Oct 15 08:50:54 1997 Andrew Cagney * corefile.c (core_attach): Pad out allocated memory regions so that they are always correctly aligned. (struct _core_mapping, core_map_attach, core_init, new_core_mapping): Change free_buffer to type void*. Mon Oct 6 18:09:26 1997 Michael Meissner * sim_calls.c (zfree): Call free correctly. Mon Sep 29 10:05:01 1997 Andrew Cagney * sim_calls.c (zfree): Use free, not mfree. (sim_io_flush_stdoutput): Replace gdb_flush with callback -> flush_stdout. Fri Sep 26 09:50:29 1997 Andrew Cagney * ppc-instructions (sraw, slw, srw): From Charles Lefurgy, Fix mask extracting shift amount. Correctly condition for setting XER in sraw. (ldhau): From Johannes Reisinger, update rA after load. Tue Sep 9 22:13:23 1997 Felix Lee * basics.h (CONCAT*): token-pasting macros, if ALMOST_STDC, for MSVC. * words.h: __int64 instead of long long for MSVC. Wed Aug 27 10:24:15 1997 Andrew Cagney * sim_calls.c (sim_create_inferior): Check the simulator was initialized before creating inferior. * idecode_expression.h (ALU_END): From Charles Lefurgy - Extract sign bit using 64 bit and not a 32 bit mask. Wed Aug 27 10:15:48 1997 Andrew Cagney * sim_calls.c (sim_load): From Ian Lance Taylor - free argv after it has been used, not before. Tue Aug 26 10:41:35 1997 Andrew Cagney * sim_calls.c (sim_kill): Delete. (sim_create_inferior): Add ABFD argument. (entry_point): Delete variable. (sim_load): Move setting of PC from here. (sim_create_inferior): To here. Mon Aug 25 16:17:06 1997 Andrew Cagney * sim_calls.c (sim_open): Add ABFD argument. Thu Jul 3 10:18:06 1997 Andrew Cagney * ppc-instructions (PPC_INSN_INT): From Michael Thies - Monitoring CR register updates dependant on RC value had logic backwards. * ppc-instructions (Load String Word Immediate): From Brad Parker - sense of wrap test in check for overwriting RA wrong. (Load String Word Indexed): Ditto. * configure.in: From Erik Landry - set sim_default_model not sim_model for sim-default-model option. * configure: Regenerate. * interrupts.c (check_masked_interrupts): Schedule a hardware interrupt delivery when FP interrupts get enabled. (program_interrupt): Generate FP exceptions instead of aborting. (deliver_hardware_interrupt): Deliver a FP exception if so enabled. * registers.h: Add definition of fpscr_vx_bits. * idecode_expression.h (FPSCR_END): Always update FEX and VX bits in FPSCR. (FPSCR_END): Explicitly check for possible floating point exception conditions. (FPSCR_BEGIN): Simplify. * ppc-instructions (Move From FPSCR): Enable. (Move To FPSCR Bit 1): Ditto. (Move To FPSCR Bit 0): Ditto. (Move To FPSCR Field Immediate): Ditto. (Move to Condition Register from FPSCR): Simplify. (invalid_arithemetic_operation): Generate a QNaN when invalid operation exception disabled. Tue May 20 10:22:50 1997 Andrew Cagney * sim_calls.c (sim_open): Add callback argument. (sim_set_callbacks): Delete. Tue Apr 22 22:36:57 1997 Mike Meissner * sim_callbacks.h (error): Make declaration match gdb's. * main.c (error): Ditto. Fri Apr 18 17:03:09 1997 Andrew Cagney * sim_calls.c (sim_stop_reason): Simplify. Was running implies stopped/SIGINT. Exit implies a status code. * psim.c (cntrl_c_simulation): From main.c. Event function that halts the simulator. (psim_stop): New. Asynchronously schedule a stop simulator event. (psim_run_until_stop): Delete. Made redundant by psim_stop. * main.c (cntrl_c): Update. (cntrl_c_simulation): Moved to psim.c. * sim_calls.c (sim_stop): New function. Use psim_stop which schedules a stop event. (sim_resume): Drop SIGINT handler, now in gdb/main.c. (sim_resume): Use psim_run as stop variable no longer needed. Fri Apr 18 17:03:08 1997 Andrew Cagney * psim.c (psim_options): Handle -E option correctly. (psim_usage): Document. Thu Apr 17 03:28:03 1997 Doug Evans * psim.c (psim_options): Ignore -E option (sets endianness). * sim_calls.c: #include bfd.h. (entry_point): New static local. (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd. (sim_create_inferior): Return SIM_RC. Delete arg start_address. Tue Apr 15 14:57:18 1997 Ian Lance Taylor * Makefile.in (INSTALL): Set to @INSTALL@. (INSTALL_XFORM, INSTALL_XFORM1): Remove. (install): Depend upon installdirs. Use $(program_transform_name) directly, rather than using $(INSTALL_XFORM). (installdirs): New target. Fri Apr 4 17:54:36 1997 Jim Wilson * Makefile.in (tmp-hw, tmp-pk): Use for loop to eliminate duplicates rather than the non-portable cat -n. Mon Apr 14 16:29:51 1997 Ian Lance Taylor * Makefile.in (INSTALL): Change install.sh to install-sh. Tue Apr 1 18:15:14 1997 Jim Wilson * ppc-instructions: Change milhwu to mulhwu. Wed Apr 2 15:38:08 1997 Doug Evans * sim_calls.c (sim_open): New arg `kind'. Wed Apr 2 14:51:17 1997 Ian Lance Taylor * COPYING: Update FSF address. Tue Mar 25 16:17:59 1997 Andrew Cagney * main.c (sim_io_read_stdin): Only compile unbuffered IO code if all the required features are supported by the host OS. Tue Mar 25 12:13:02 1997 Andrew Cagney * emul_bugapi.c (emul_bugapi_create): Guard against NULL images. * configure.in (enable-sim-endain): Correct typo in usage (from Erik Landry ). * configure: Re-generate. Fri Mar 14 18:23:02 1997 Andrew Cagney * Makefile.in (targ-vals.def): Re-do rule so that it works with FreeBSD's make. Didn't like $<. Thu Mar 13 12:55:48 1997 Doug Evans * sim_calls.c (sim_open): New SIM_DESC result. Argument is now in argv form. (other sim_*): New SIM_DESC argument. Thu Feb 13 10:35:14 1997 Andrew Cagney * ppc-opcode-simple-array, ppc-opcode-simple-goto, ppc-opcode-simple-switch, ppc-opcode-complex-array, ppc-opcode-complex-goto, ppc-opcode-complex-switch, ppc-opcode-jump, ppc-opcode-goto, ppc-opcode-flat: Delete, superseeded by --sim-decode-mechanism option. * ppc-opcode-simple, dc-simple: Rename to be 8.3 * ppc-opcode-complex, dc-complex: Ditto. * ppc-opcode-stupid, dc-stupid: Ditto. * ppc-opcode-test-1, dc-test.01: Ditto. * ppc-opcode-test-2, dc-test.02: Ditto. * configure.in (--enable-sim-opcode): Change prefix to dc- instead of ppc-opcode-. Wed Feb 12 19:33:45 1997 Andrew Cagney * Many of the ppc-opcode-* files are identical baring the type of lookup table. Instead of having multiple tables, igen can do this via an additional option. * ld-decode.h, ld-decode.c (force_decode_gen_type): New function, allow the type of generated table specified in the decode file to be overridden. * ld-decode.c (load_decode_table): Allow the table type to be overridden. * igen.c (main): Add -T option so that an overriding instruction decode mechanism can be specified. * configure.in: New option --sim-decode-mechanism to control igen's new -T flag. * Makefile.in (IGEN_FLAGS): Add IGEN_IDECODE_MECHANISM set by the configure script. * configure: Regenerate. Tue Feb 11 13:49:10 1997 Michael Meissner * events.c (event_queue_create): Don't use NULL to initialize an integer field. (even_queue_{init,schedule_after_signal,tick}): Conditionalize use of sigprocmask to appropriate autoconf test. * main.c ({cntrl_c,main}): Use RETSIGTYPE for signal return type, don't assume void. * sim_calls.c (sim_{ctrl_c,resume}): Ditto. * Makefile.in (callback.o): Define HAVE_CONFIG_H, so callback.c includes our config.h. Tue Feb 4 13:42:59 1997 Doug Evans * configure.in: Fix typo in test for callback.c. * configure: Regenerated. Fri Feb 7 10:04:25 1997 Andrew Cagney * emul_chirp.c (emul_chirp_create): Handle a virtbase of -1 being found in the device tree. Wed Feb 5 10:56:27 1997 Andrew Cagney * Property create/initialization still wasn't correctly ordered. Should be delaying everything related to ihandle creation until after the rest of the tree has been established. * device.c (device_find_ihandle_runtime_property): Update. (device_add_ihandle_runtime_property): Update. * tree.c (parse_ihandle_property): Delay lookup of the device to be opened until the ihandle initialization phase. * tree.c (print_properties): Update. Wed Feb 5 10:56:27 1997 Andrew Cagney * gen-icache.c (print_icache_extraction): Add a reason parameter. Augment each extracted field with a comment citing the codes origin. Should simplify tracking down incorrect cache extractions. Tue Feb 4 17:44:51 1997 Andrew Cagney * gen-icache.c: Generalize code handling XXX_is_NNN so that it works for normal and boolean table entries. * psim.c (psim_write_memory): last_cpu == -1 or nr_cpus is now valid. Handle this just like *_{read,write}_register now handles it. Mon Feb 3 17:18:16 1997 Andrew Cagney * events.c (insert_event_entry): Correct loop termination assertions. Fri Jan 31 16:20:26 1997 Andrew Cagney * psim.c (psim_options): Add new option -c for max-iterations or count. (psim_usage): Document. (psim_max_iterations_exceeded): New function, abort simulation if max iterations exceeded. * gen-idecode.c: Re-work the table lookup code so that it assumes that the entry is a leaf by default. Simplify the boolean table entry code so that it involves a mask + test instead of shift + shift + mask + test. * gen-idecode.c: Correct generated igen body so that it no drops or doubles clock interrupts. Thu Jan 30 11:23:20 1997 Andrew Cagney * Makefile.in (BUILT_SRC_WO_CONFIG): Change targ-vals.* to @sim_targ_vals@ * configure.in (sim_callback, sim_targ_vals): Set sim_targ_valls if common callback is present. Wed Jan 29 12:32:41 1997 Michael Meissner * configure.in (sim_callback): If the gdb is post 4.16, configure callback support from the common directory. * configure: Regenerate. * Makefile.in (BUILT_SRC_WO_CONFIG): Add targ-vals.{h,def} and targ-map.c. (GDB_OBJ): Add callback support configured in. (gentmap,targ-vals.def): Build from common directory. (targ-vals.h,targ-map.c): Build by running gentmap. (callback.o): Build from source in common directory. (targ-map.o): Add dependency. (clean): Remove gentmap. Wed Jan 29 12:14:19 1997 Andrew Cagney * igen wasn't aborting if the opcode table contained no valid fields. * misc.c (name2i): Possibly abort if an invalid name is encountered. * ld-decode.c: Abort if the table type isn't found. Wed Jan 29 12:14:19 1997 Andrew Cagney * When performance monitoring is disabled, it is still possible to determine the simulation speed by looking at the number of elapsed ticks recorded by the event queue. * psim.c (psim_write_register, psim_read_register): Force the cpu to zero when it is either of `-1' or `nr_cpus'. In both cases the next cpu would be zero any way. * mon.c (mon_print_info): If possible, print the system cycle performance. This is an indication of the number of instructions per second. Wed Jan 29 12:14:19 1997 Andrew Cagney * The code to allow an event queue to be updated during a signal was missing. For main.c, a cntrl-c simulation termination wasn't handled cleanly. * The simulation would not correctly restart if an event requested that the simulation be halted. * psim.c (psim_options): Add hack to -i option to optionally include a level vis -i2. (psim_usage): Document. * main.c (cntrl_c, cntrl_c_simulation): New functions. When a cntrl-c occures schedule an event to halt the simulation. (main): Catch CNTRL-C signals with the function cntrl_c. * events.c (event_queue_process): Mask interrupts while manipulating the async event queue. (event_queue_init): Ditto. (event_queue_schedule_after_signal): Ditto. * events.c (event_queue_process): Mark the event queue as being in the processing state when processing has started. Adjust code so that it is tolerant of halts. (event_queue_init): Start the event queue out with processing false. (event_queue_tick): Check that processing isn't still being performed. * gen-idecode.c (print_run_until_stop_body): Call event_queue_process_events to clear possibly pending events before starting a simulation run. Re-arange main loop so that simulator is correctly restarted when an event halts the simulation. * psim.c (psim_halt): Handle an event halting the simulation. * psim.c (psim_init): Adjust initial cpu - == -1 - to match reworked idecode. Wed Jan 29 12:14:19 1997 Andrew Cagney * ppc-opcode-complex: Correct typo - was expanding ORA instead of RA. Based on instruction frequency stats, expand additional instructions. * ppc-instructions: Change all `RA == 0' to RA_is_0. * ppc-opcode-stupid: Move all but the basic table in -complex into here. Update to new format. * Makefile.in (tmp-defines): New target. Force defines.h to always be built. Hence get ppc-opcode-goto to build. Tue Jan 28 13:00:19 1997 Andrew Cagney * hw_com.c (hw_com_instance_read, hw_com_instance_write): Implement. Thu Jan 23 09:07:26 1997 Andrew Cagney * hw_trace.c (hw_trace_init_data): Delete. The trace options need to be initialized independant of the rest of the simulation initalization. Otherwize a trace option explictly set from gdb could be overridden by hw_trace. * psim.c (psim_options): Clarify reason why the trace ioctl occures. * FIXME: The trace code is too scattered - hw_trace.c, psim.c, debug.c. It could be much simpler. Thu Jan 23 09:07:26 1997 Andrew Cagney * Some devices support removable media. Add hooks to the disk device so that it supports this. * device.c (device_add_string_array_property, device_find_string_array_property): New functions, manipulate properties containing an array of strings. (device_find_string_property): Allow a string array. (device_init_static_properties): Update. (device_init_runtime_properties): Update. * hw_disk.c (hw_disk_ioctl): Add ioctl for changing the disk media. If no file image is specified, use the next one in the image property list. (hw_disk_init_address): Change the file property so that it is a string array - use the first entry for the initial file image. * tree.c (print_string_aray_property): New function - print a string array. (print_properties): Adjust. (print_string): Write a string, handling double quotes. * device.h: Define an ioctl to `change-media' with an optional new media image. * hw_disk.c: Allow floppy disk devices to be specified. * psim.c (psim_command): New function, parse more complex psim commands such as "change-media" and "trace". * sim_calls.c (sim_do_command): Use. Wed Jan 22 09:38:33 1997 Andrew Cagney * For expressions like (RA == 0) that are entered in to the cache as RA_is_0. If possible generate the result of the expression so that the compiler gets a better chance of eliminating dead branches. * gen-icache.c (print_icache_extraction): For a cache entry of the form _is_ where it is a boolean field, generate the result of the expression instead of the expression its self. (print_icache_body): Remove code that was looking for *_is_0 and then generating corresponding definitions. * gen-icache.c (print_icache_struct): If there is no cache, do not output expressions in idecode.h file. * gen-icache.c (print_icache_body): Output them here. * ppc-opcode-complex: Clarify constant values for SPR==LR register expansion. * ppc-cache-rules (RA_is_0, SPR_is_256): Two new cache entries. Wed Jan 22 12:24:52 1997 Andrew Cagney * The code that put values in and extracted values from the cache was too compilicated. The cache table did not allow values to be computed from cache entries. #defines could only be used when a cache was present, remove the restriction. * ld-cache.h, ld-cache.c: Add a new cache entry type - SCRATCH. A scratch variable is defined when a cache entry is beinf filled. Change the definition of a COMPUTE variable to be defined when the cache entry is being used. * gen-icache.c: Update. * ld-cache.h, ld-cache.c: Change field names so that their meaning is more obvious. old_name->field_name, new_name->derived_name. * gen-icache.c: Update * gen-icache.h, gen-icache.c (print_icache_body): Make the three different types of cache code - put into cache, extract from cache, no cache - an explicit argument to print_icache_body. * gen-icache.c (print_icache_extraction): Ditto. * gen-semantics.c (print_c_semantic): Update use. * gen-idecode.c (print_jump_insn): Update use. * gen-icache.c (print_icache_function): Update use. * igen.c (main): Change 'R' option so that it does not force the cache. * configure.in (enable-sim-icache): Clarify description. Make #define one of the defaults regardless of the cache. Probably should revamp and add a separate option. Tue Jan 21 13:26:10 1997 Andrew Cagney * pk_disklabel.c (block_is_fdisk): Tidy up traces - use dos partition numbering. (pk_disklabel_create_instance): Partition 1..4 are valid - not 1..3. (is_iso9660): New function, verify a CD9660 File system. (pk_disklabel_create_instance): Start expanding so that active partition selection is supported. Mon Jan 20 11:20:15 1997 Andrew Cagney * The cap object was retaining a reference to the instance of a device after it was deleted. Instead add and remove cap's from the cap db as they are created and deleted. This ensuring that a capibility is only used during the lifetime of the corresponding object. * cap.h, cap.c: Correct cap type - was signed32 should be signed_cell. * cap.c (cap_add, cap_remove): New methods for cap object that allow the explicit addition and removal of internal objects that the cap knows about. * cap.c (cap_init): Rewrite. Verify that the only objects remaining in the cap data base are those that were entered first. Thse objects will be the permenant ones. * device.c (device_init_address): Remember to initialize the cap database. * device.c (device_create_instance_from): Explicitly add device instances to the cap database. Simplify create code. (device_instance_delete): Explicitly remove device instances from the cap database. * device.c (device_create_from): Explicitly add a device to the cap data base. * device.c (device_create_from): Always set the cap members. * hw_disk.c: Output the instance when tracing. Sun Jan 19 16:44:29 1997 Andrew Cagney * tree.c (split_device_specifier): Add support for aliases when looking up a device. Now needs a device as an argument. (split_property_specifier): Ditto. Sun Jan 19 15:28:23 1997 Andrew Cagney * The memory "claim" and "release" methods take an address and size as arguments. These may be multi cell values. Initially fix the memory code so that they check/detect this. Leave the adjustment of any clients to later. * hw_memory.c (hw_memory_instance_claim, hw_memory_instance_release): Handle multi-cell memory devices. * hw_memory.c (hw_memory_instance_claim): Be tolerant towards the release of memory regions that were not claimed. Fri Jan 17 12:01:07 1997 Andrew Cagney * device.h, device.c (device_instance_call_method): Correct return type - can return either 0 or -1, hence should be a signed type. * device_table.h: Ditto. * hw_memory.c (hw_memory_instance_claim, hw_memory_instance_release): Update. * hw_disk.c (hw_disk_max_transfer, hw_disk_block_size, hw_disk_nr_blocks): Ditto. Fri Jan 17 11:50:13 1997 Andrew Cagney * emul_chirp.c (chirp_emul_claim): Implement using the "claim" method belonging to "/chosen/memory". (chirm_emul_release): Ditto. * Makefile.in (LIB_INLINE_SRC): Remove emul_* from list of files that are inlined. These modules are called via a table and are not made inline. * hw_init.c (update_for_binary_section): Fix failure to allocate memory used by the binary in real-mode executions. If "claim" property is present, allocate memory from the "/chosen/memory" device. * emul_chirp.c (emul_chirp_create): Specify that memory should be claimed when loading a real image. * hw_memory.c (hw_memory_instance_claim): Don't page align memory allocations. * hw_memory.c (hw_memory_instance_release): Avoid infinite loop when merging adjacent memory chunks. Thu Jan 16 08:51:25 1997 Andrew Cagney * vm.h (vm_data_map_read_buffer, vm_data_map_write_buffer): Add optional PROCESSOR & CIA args so that this routine also abort an access. * vm_n.h (vm_data_map_read_N, vm_data_map_write_N): For a miss-aligned access when a transfer fails abort. * emul_bugapi.c (emul_bugapi_do_write): Use emul_read_buffer instead of the vm_read_buffer. * emul_netbsd.c (do_write): Ditto. * emul_unix.c (do_unix_write): Ditto. Wed Jan 15 14:38:25 1997 Andrew Cagney * configure.in (--enable-sim-jump): Default is NULL and not -E. * configure: Regenerate. * basics.h (__attribute__): Enable attributes if GCC >= 2.6. (UNUSED): Only enable UNUSED if GCC >= 2.7. * gen-icache.c (print_icache_extraction): Print UNUSED macro instead of explicit __unused__ attribute. (print_icache_body): Ditto. * idecode_expression.h (FPSCR_BEGIN): Use UNUSED. Wed Jan 15 13:54:50 1997 Andrew Cagney * cpu.h, cpu.c (cpu_synchronize_context): Add CIA argument as reference point. * vm.c (vm_synchronize_context): Add PROCESSOR and CIA as arguments so that there is a reference point for recovery. (vm_synchronize_context): Pass processor+cia for errors. (om_unpack_sr): Ditto. (om_unpack_srs): Ditto. * vm.c (vm_create): Review error messages. * vm.c: Include "cpu.h" so that cpu_error is visible. * ppc-instructions (Return From Interrupt): Pass CIA. (Instruction Synchronize): Ditto. * psim.c (psim_init): Ditto. Wed Jan 15 12:25:11 1997 Andrew Cagney * cpu.h, cpu.c (cpu_error): Aborts simulation with error message, but also saves current processor state. * basics.h: Move #include to here from device_table.h. * interrupts.c (perform_oea_interrupt): Use. No longer loose CIA when simulation aborted. (program_interrupt): Ditto. (floating_point_unavailable_interrupt): Ditto. (alignment_interrupt): Ditto. (floating_point_assist_interrupt): Ditto. (perform_oea_interrupt): Ditto. (machine_check_interrupt): Ditto. Tue Jan 14 12:19:10 1997 Andrew Cagney * ppc-instructions (Move from Special Purpose Register): Support move from DEC. Mon Jan 13 16:58:12 1997 Andrew Cagney * debug.h, debug.c: Add "interrupts" trace option. * interrupts.c (data_storage_interrupt): Add tracing. (machine_check_interrupt): Ditto. (instruction_storage_interrupt): Ditto. (alignment_interrupt): Ditto. (program_interrupt): Ditto. (floating_point_unavailable_interrupt): Ditto. (system_call_interrupt): Ditto. (floating_point_assist_interrupt): Ditto. (deliver_hardware_interrupt): Ditto. * interrupts.c (program_interrupt): For UEA mode, halt the processor - so that the current state is saved - instead of aborting. (floating_point_unavailable_interrupt): Ditto. (floating_point_assist_interrupt): Ditto. Thu Jan 2 09:10:41 1997 Andrew Cagney * interrupts.c (perform_oea_interrupt): Halt rather than abort on a double interrupt. Wed Jan 1 22:54:52 1997 Andrew Cagney * ppc-instructions (Store Multiple Word, Load Multiple Word): Enable. * tree.c (print_properties): For an array consider printing it out as an integer array. * hw_memory.c (hw_memory_init_address): If an "available" property is present, use that to initialize the available memory instead of using the reg property. * emul_generic.c (emul_add_tree_hardware): Add "available" property to memory device. Fri Dec 20 13:19:07 1996 Andrew Cagney * ppc-instructions (Rotate Left Word then AND with Mask): Enable. * device.c (device_instance_call_method): Was only looking at the first method. * hw_disk.c (hw_disk_nr_blocks): Implement #blocks method. (hw_disk_block_size): Implement block-size method. (hw_disk_max_transfer): Implement max-transfer method. * hw_phb.c (hw_phb_init_address): Reinit the rest of the PHB. * emul_chirp.c (chirp_emul_instance_to_path): Recover from an invalid ihandle. (chirp_emul_instance_to_package): Ditto. (chirp_emul_method): Ditto. (chirp_emul_read): Ditto. (chirp_emul_write): Ditto. (chirp_emul_close): Ditto. (chirp_emul_seek): Ditto. (chirp_emul_package_to_path): Ditto (for phandle). (chirp_emul_package_to_path): Return the length. * psim.c (psim_merge_device_file): Allow continuation lines. Thu Dec 19 11:09:43 1996 Andrew Cagney * emul_chirp.c (chirp_emul_boot): Implement. Well report the new string and exit. * emul_chirp.c (chirp_emul_exit): Correct type of args struct members - *_cell not host dependant int. Wed Dec 18 17:49:59 1996 Andrew Cagney * interrupts.c (perform_oea_interrupt): Print additional information if a double interrupt is encountered. Wed Dec 18 17:49:59 1996 Andrew Cagney * psim.c (psim_merge_device_file): Tolerate an incorrect file-name being specified with the -f option. (psim_merge_device_file): Correct check for end of string. Wed Dec 18 17:49:59 1996 Andrew Cagney * emul_chirp.c (chirp_emul_peer): Was falling off the end of the list of devices. Return zero to the client instead. * emul_chirp.c (chirp_emul_child): Ditto * emul_chirp.c (chirp_emul_parent): Ditto * device.c (device_root): Assert assumption about the device being valid. Tue Dec 17 15:12:38 1996 Andrew Cagney * emul_chirp.c (emul_chirp_create): Add description property to each significant node in the device tree. * emul_bugapi.c (emul_bugapi_create): Ditto. Fri Dec 13 14:30:31 1996 Andrew Cagney * main.c (sim_io_read_stdin): For a single byte STDIO read, use a tempoary two byte buffer. Single byte read with fgets will not work. * main.c: Include errno.h. (sim_io_read_stdin): For non-STDIO, make it work. * emul_chirp.c (chirp_emul_read): Return the correct error status. Fri Dec 13 14:30:31 1996 Andrew Cagney * std-config.h (WITH_STDIO): Don't hard-wire the STDIO mechanism. Instead have each emulation default it to DO_USE_STDIO. * emul_generic.c (emul_add_tree_options): Select the STDIO I/O mechanism as the default if enabled or if nothing selected. * sim_calls.c (sim_io_read_stdin): Passify GCC's desire for a return value. (sim_io_write_stdout): Ditto. (sim_io_write_stderr): Ditto. * main.c (sim_io_write_stdout): Ditto. (sim_io_write_stderr): Ditto. (sim_io_read_stdin): Ditto. Tue Dec 10 10:31:48 1996 Michael Meissner * emul_chirp.c (emul_chirp_instruction_call): Make *printf calls type correct. * vm.c (om_effective_to_virtual): Ditto. * events.c (event_queue_schedule{,_after_signal}): Ditto. (event_queue_{deschedule,process}): Ditto. * hw_htab.c (htab_decode_hash_table): Ditto. (htab_map_{page,binary}): Ditto. * hw_opic.c (hw_opic_init_data): Ditto. (handle_interrupt): Ditto. (do_processor_init_register_{read,write}): Ditto. (write_vector_priority_register): Ditto. ({read,write}_destination_register): Ditto. (do_suprious_vector_register_{read,write}): Ditto. (do_current_task_priority_register_N_{read,write}): Ditto. (do_timer_frequency_reporting_register_{read,write}): Ditto. (do_timer_N_{current,base}_count_register_{read,write}): Ditto. (do_ipi_N_dispatch_register_write): Ditto. (do_vendor_identification_register_read): Ditto. (do_feature_reporting_register_N_read): Ditto. (do_global_configuration_register_N_{read,write}): Ditto. * hw_phb.c (hw_phb_attach_address): Ditto. (hw_phb_unit_decode): Ditto. (hw_phb_address_to_attach_address): Ditto. (hw_phb_io_{read,write}_buffer): Ditto. * hw_ide.c (setup_fifo): Ditto. * sim_calls.c ({defs,callback,remote-sim}.h): Find gdb include files via -I instead of using "../../gdb/" prefixes. Tue Dec 10 10:12:44 1996 Andrew Cagney * debug.h: Add tracing for the pal device. * hw_pal.c: Update. * emul_chirp.c (chirp_emul_getprop): More tracing. Tue Dec 10 10:12:44 1996 Andrew Cagney * device.h, device.c (device_find_ihandle_runtime_property): New function. Reverse of add_ihandle_runtime property. (device_init_runtime_properties): Use it. * device.c (find_property_entry): New function returns the internal property spec. (device_set_property): Use. (device_find_property): Use. Tue Dec 10 10:12:44 1996 Andrew Cagney * psim.c (psim_merge_device_file): Strip newline from device specs. Tue Dec 10 10:12:44 1996 Andrew Cagney * hw_htab.c (htab_map_binary): For overlapping text / data maps merge the two. Also check that the merge is safe. * emul_chirp.c (emul_chirp_create): Add a description property to the pte's so that they are easier to identify. (emul_chirp_create): Don't specify a load address for the CHRP image. Always use the values specified by the executable. * hw_htab.c (htab_map_page): Abort if a duplicate map is encountered. Mon Dec 9 12:08:46 1996 Andrew Cagney * hw_htab.c (htab_map_page): Formatting. * emul_chirp.c (emul_chirp_instruction_call): Check for a NULL method name when handling the client call. Also check for other bad call arguments. * emul_chirp.c (emul_chirp_create): Allow real-mode?, real-base, etc to be overriden. Mon Dec 9 12:08:46 1996 Andrew Cagney * os_emul.c (os_emul_create): Use tree find property instead of device find property - sigh. Thu Dec 5 10:46:42 1996 Andrew Cagney * 961205: Release snapshot 961205. Thu Dec 5 10:46:42 1996 Andrew Cagney * configure.in (hostbitsize, bitsize): Fix typo in error message - cannot contain a comma. (sim-warnings): Check for more potential errors. * psim.c (psim_usage): Add -f option. Specifies a file containing device tree specifications that should be merged into the device tree. * configure.in: Sort options. * configure: Rebuild Wed Dec 4 13:57:31 1996 Andrew Cagney * psim.c (psim_usage): Add -n option - specify number of processors. * emul_chirp.c: Add description. * emul_bugapi.c: Ditto. * emul_unix.c: Ditto. * emul_netbsd.c: Ditto. Fri Nov 29 11:12:22 1996 Andrew Cagney * hw_pal.c (hw_pal_attach_address): New function, if an attach is encountered, assume that it is the single disk. * hw_pal.c: Add generic device/size decode methods. * hw_nvram.c (hw_nvram_init_address): Use the first nonzero reg property entry when determining the nvram size. * hw_core.c: Add generic address/size decode methods. * emul_chirp.c (emul_chirp_instruction_call): Return and trace nonzero status from client functions. * main.c (error): Always include a cariage return when writing out errors. Wed Nov 20 00:36:55 1996 Doug Evans * sim_calls.c (sim_resume): Reset sim_should_run if single stepping. Thu Nov 28 13:19:46 1996 Andrew Cagney * emul_bugapi.c (emul_bugapi_do_diskio): Add support for multiple optional disks. * emul_generic.c (emul_add_tree_hardware): Drop the dummy eeprom. Attach the pal - for I/O - as a pseudo device haning from the firmware sub tree. * emul_bugapi.c (emul_bugapi_create): Add a small memory device to the device tree at the address of the hi-mem interrupt vector addreses. Used by bugapi to establish its trap instructions. * debug.h: Add a new macro DITRACE for tracing device instances. * debug.h: Extend the DTRACE macro so that it can also tests for device specific tracint. * device.h, device.c (device_trace): Add method to determine device specific tracing. (device_init_address): Set the devices tracing level. Thu Nov 21 12:05:32 1996 Andrew Cagney * tree.h, tree.c (tree_device): New files - separate out the device parser and other tree operations from the device. * inline.h, inline.c (INLINE_TREE): Add. * device.h, device.c (device_tree_add_parsed): Delete. * Makefile.in (tree.c): Add rules for new file. * Makefile.in: Better order the emul_* files. * emul_generic.c (emul_add_tree_hardware): Update. * emul_netbsd.c (emul_netbsd_create): Update. * emul_unix.c (emul_unix_create): Ditto. * emul_chirp.c (emul_chirp_create): Ditto. * emul_bugapi.c (emul_bugapi_create): Ditto. * psim.c (psim_tree): Ditto. * hw_init.c: Ditto. * emul_generic.h: Include tree.h * Makefile.in: Add to EMUL_GENERIC_H dependencies. * device.h, device.c (device_root): New function - returns the root of the tree. * corefile.c: Use. * device.h, device.c (device_clean): New function, clean up device ready for next simulation run. This includes things like deleting interrupt edges and properties created during the simulation and also scrubbing any pre-defined properties. * tree.c (tree_init): Use. * device.h, device.c (device_init_static_properties): New function. Initialize any static predefined properties. By static we mean those that have values that can be determined before the device tree initialization has started. * tree.c (tree_init): Use. * device.h, device.c (device_init_address): Add code to check/verify the devices #address-cells and #size-cells. (device_add_integer_property): Delete corresponding code. (device_nr_address_cells, device_nr_data_cells): Check for property when returning value. * device.h, device.c (device_init_runtime_properties): New function. Initialize those properties that are not `static'. At present the only such property is the ihandle. * tree.c (tree_init): Use. * device.h, device.c (reg, ranges): Rework these so that they use an array of the fundamental type - single reg or single range entry. * device.h, device.c (device_add_ihandle_runtime_property): Re-implement the adding of an ihandle during tree construction so that it better fits in with device initialization. Thu Nov 21 12:05:32 1996 Andrew Cagney * device.h, device.c (device_ioctl): Add additional argument - request - so that the caller must always specify the type of the ioctl request. * device_table.h: Update. * hw_trace.c (hw_trace_ioctl): Ditto. * hw_vm.c (hw_vm_ioctl_callback): Ditto. * hw_init.c (hw_stack_ioctl_callback): Ditto. * psim.c (psim_options): Ditto. Thu Nov 21 12:05:32 1996 Andrew Cagney * BUGS: Updated a bit. Wed Nov 20 14:06:37 1996 Andrew Cagney * hw_opic.c: Finish - third round. Wed Nov 20 12:02:08 1996 Andrew Cagney * hw_glue.c (hw_glue_io_read_buffer_callback): Fix miscalc of glue reg index. (hw_glue_io_write_buffer_callback): Ditto. Tue Nov 19 21:17:08 1996 Andrew Cagney * events.c (event_queue_process): Was incorrectly consuming future events on the queue when they should be left alone. * debug.h, debug.c (events): Add support for event queue tracing. * events.c: Add event tracing. * debug.h, debug.c: Order device trace options. Fri Nov 15 15:23:39 1996 Michael Meissner * pk_disklabel.c (pk_disklabel_create_instance): Fix up some warnings generated by GCC. Sun Nov 17 17:59:14 1996 Andrew Cagney * sim-endian.h: Add LE versions of byte swap macros. Needed for PCI devices which are little-endian. * sim-endian-n.h (endian_le2h_N, endian_h2le_N): Ditto Sun Nov 17 17:59:14 1996 Andrew Cagney * hw_iobus.c (hw_iobus_attach_address_callback): Change the iobus so that it is implementing a 1-1 address map. * emul_generic.c (emul_add_tree_hardware): Adjust. * emul_generic.c (emul_add_tree_hardware): Don't add the nvram as a default. Sun Nov 17 17:59:14 1996 Andrew Cagney * device.c (split_find_device): Be tolerant of missing unit addresses. Fri Nov 15 16:49:49 1996 Andrew Cagney * basics.h (port_direction): New type, specify the direction of any `port'. * device.h, device.c (device_interrupt_decode): Include specification of port direction in operations. (device_interrupt_encode): Ditto. * device_table.h: Add a direction field to the interrupt port table. * device.c (device_tree_add_parsed): Specify port direction. Thu Nov 14 21:38:13 1996 Andrew Cagney * hw_opic.c: Finish - second round. Thu Nov 7 00:18:59 1996 Andrew Cagney * hw_htab.c (htab_init_data_callback): Allow the virtual-address to be specified as an array which allows 64bit addresses. * device.c (device_find_integer_array_property): New function. Simplify the querying of elements of an integer array. (device_add_integer_property, device_find_integer_property): Update to correctly use the cell type. * vm.c (om_unpack_sr): Clarify shifting comment. (om_pte_0_masked_vsid): Ditto. Add 64bit version. * emul_chirp.c (emul_chirp_create): Initialize the segment registers. * vm.c (om_effective_to_virtual): Trace segment register use. * hw_htab.c (htab_map_page): Print out the pteg base address to simplify cross checking between vm and the htab. (htab_decode_hash_table): Use device_error instead of error. (htab_map_page): Ditto. (htab_dma_binary): Ditto. (htab_map_binary): Ditto. (htab_init_data_callback): Ditto. Wed Nov 6 20:20:58 1996 Andrew Cagney * interrupts.h: Clarify what the optional instruction program interrupt is - a subset of illegal instruction program interrupt. * interrupts.c (program_interrupt): For UEA mode, clarify what an optional instruction program interrupt is. (program_interrupt): For OEA mode, as per spec, generate an illegal instruction program interrupt when an optional instruction is encountered. * gen-semantics.c (print_semantic_body): Delete code differentiating between an unimplemented floating point and normal instruction. Instead, such a case can be handled explicitly. * ppc-instructions (store floating-point as integer word indexed): Mark as optional. (Floating Convert to Integer Doubleword): Make the floating point assist interrupt explicit. (Floating Convert To Integer Doubleword with round towards Zero): Ditto. (Floating Convert To Integer Word): Ditto (Move From FPSCR): Ditto. (Move to Condition Register from FPSCR): Ditto. (Move To FPSCR Fields): Ditto. (Move To FPSCR Field Immediate): Ditto. (Move To FPSCR Bit 0): Ditto. (Move To FPSCR Bit 1): Ditto. Mon Nov 4 12:49:13 1996 Andrew Cagney * corefile.c (core_map_read_buffer, core_map_write_buffer): Avoid breaking up transfers. * corefile.c: Adjust arguments so that the client server relationship is clarified. * hw_glue.c (hw_glue_init_address): Update so it can be attached to a PCI bus. * hw_disk.c (hw_disk_instance_write): Add more checks to disk IO - looking for things like overflow/underflow. Sun Nov 3 18:45:20 1996 Andrew Cagney * emul_generic.c (emul_add_tree_hardware): Hang the disk off the PAL device instead of the IOBUS. The disk must be attached to a logical bus. * hw_disk.c (hw_disk_init_address): Just use the unit address directly in the attach - the rest isn't relevant. Sat Nov 2 21:48:57 1996 Andrew Cagney * configure.in (sim-hardware, sim-packages): Allow additional hardware and packages to be prefixed as well as appended. * Makefile.in (tmp-hw, tmp-pk): Retain the user specified order of packages when building them. Consequently, a user can override a standard device by prefixing their own version. * Makefile.in (hw_opic.o, hw_pci.o, hw_ide.o): Add dependencies. Fri Nov 1 14:42:57 1996 Michael Meissner * mon.c (_cpu_mon): Add fields for counting 1, 2, 4, and 8 byte reads and writes. (mon_{read,write}): Count 1, 2, 4, and 8 byte reads/writes. (mon_print_info): Correct typo regarding # of unaligned reads and writes. Print out how many 1, 2, 4, and 8 byte reads/writes there are. Tue Oct 29 17:55:43 1996 Michael Meissner * configure.in (AC_CHECK_FUNCS): Add access. * config{.in,ure}: Regenerate. * emul_unix.c (do_unix_nop): System call that always succeeds. (do_unix_access): Support access system call. (solaris_descriptors): Make sigaltstack and sigaction nops. ({solaris,linux}_descriptors): Add support for access. Tue, 8 Oct 18:42:26 1996 Jason Molenda * Makefile.in (clean): Move config.log to distclean. Fri Nov 1 16:44:28 1996 Andrew Cagney * corefile-n.h (core_map_write_N): Improve abort messages. * device.h, device.c (device_attach_address): Remove unused name parameter. (device_detach_address): Ditto. * device_table.h, device_table.c: Update. * hw_iobus.c (hw_iobus_attach_address_callback): Ditto. * hw_nvram.c (hw_nvram_init_address): Ditto. * hw_memory.c (hw_memory_init_address): Ditto. * hw_vm.c (hw_vm_init_address_callback): Ditto. (hw_vm_attach_address): Ditto. (hw_vm_add_space): Ditto. * hw_init.c (update_for_binary_section): Ditto. * hw_core.c (hw_core_attach_address_callback): Ditto. * hw_iobus.c (hw_iobus_attach_address_callback): Rewrite to handle configurable parent busses. Wed Oct 30 18:46:32 1996 Andrew Cagney * device_table.c (generic_device_size_to_attach_size): Provide limited support for multi-cell sizes. (generic_device_address_to_attach_address): Ditto for addresses. Tue Oct 29 02:01:29 1996 Andrew Cagney * device.c (device_add_integer_property): Check for setting of #address-cells and #size-cells properties. For these, update the corresponding device values. (device_nr_address_cells, device_nr_size_cells): Use the value from the device instead of the property. * hw_core.c: Use generic address and size conversions for the top bus. * hw_memory.c (hw_memory_init_address): Tolerate case where #address and #size cells is greater than 1. * device.c (device_tree_print_device): Clean out printing of properties. * device.c (split_device_specifier): Don't detect comments here - "#" can be a valid prefix - eg #size-cells. * psim.c (psim_merge_device_file): Suppress comments and blank lines here. * emul_generic.c (emul_add_tree_hardware): Fix typo of incorrect pal unit address. Add the property /#address-cells to the root of the tree. * device.c (device_template_create_device): Check that the unit address was successfully parsed. * device_table.c (generic_device_unit_decode): Rewrite to better handle multi-cell addresses. (generic_device_unit_encode): Ditto. * emul_generic.c (emul_add_tree_hardware): "reg" properties no longer need the explicit array type - the parser takes care of it. * pk_disklabel.c (pk_disklabel_create_instance): Add NULL return to keep GCC happy. Mon Oct 28 22:55:48 1996 Andrew Cagney * hw_ide.c: New file. Model of a basic IDE interface attached to a PCI bus. * configure.in (hardware): Add the ide device to the default configuration. * configure: Regenerate. * debug.h, debug.c: Add tracing option for the IDE device. Fri Oct 25 21:28:25 1996 Andrew Cagney * hw_phb.c, hw_phb.h: New files - implement a PHB. * configure.in (hardware): Add the phb to the list of devices to build by default. Fri Oct 25 21:28:25 1996 Andrew Cagney * hw_com.c: Review description. * hw_disk.c: Ditto. * hw_htab.c: Ditto. * hw_eeprom.c: Ditto. * hw_init.c: Ditto. * hw_cpu.c: Ditto. * hw_com.c: Update event handling. * hw_disk.c: Implement tracing. Fri Oct 25 21:28:25 1996 Andrew Cagney * device_table.c (generic_device_init_address): Use assigned-addresses property in preference to any other reg property. Fri Oct 25 21:28:25 1996 Andrew Cagney * device.h, device.c (device_find_ranges_property): New function. Simplify the manipulation of "ranges" properties. * device.c (device_add_parsed): Extend to include support for the ranges property. * device.c (device_add_parsed): Add assigned-addresses to the list of reg type properties. * device.c (device_tree_print_device): Add code to format and print a ranges property. * device.h, device.c (device_nr_address_cells, device_nr_size_cells): New functions. Determine the values of the standard properties #address-cells and #size-cells. Both of which are optional and have default values of two and one respectfuly. Previously, code that determined #address-cells was incorrectly using a value of one. Fri Oct 25 21:28:25 1996 Andrew Cagney * debug.h, debug.c: Sort debug options, Add entries for the comming PHB device. Fri Oct 18 12:12:21 1996 Michael Meissner * ppc-instructions (Floating Select): Add support for fsel unless model is 601. Allow user to filter out instruction unless -Fs is passed to igen. (Store Floating-Point as Integer Word Indexed): Raise optional instruction program abort. Allow user to filter out instruction unless -Fs is passed to igen. (Floating Square Root{, Single}): Ditto. (Floating Reciprocal Estimate Single): Ditto. (Floating Reciprocal Square Root Estimate): Ditto. * configure.in (--enable-sim-filter): If not passed, pass 32,f,s to igen. * configure: Regenerate. * interrupts.h (program_interrupt_reasons): Add optional_instruction_program_interrupt. * interrupts.c (program_interrupt): Call error with more detailed information on program interrupts, particularly in user mode. Add support for optional_instruction_program_interrupt. Wed Sep 25 10:20:29 1996 Andrew Cagney * hw_glue.c: New device. Hooks for manipulating interrupt ports. * debug.h, debug.c (trace_glue_device): Add tracing support for the interrupt glue logic device. * configure.in (hardware): Add glue device. * configure: Regenerate. Tue Sep 24 20:55:38 1996 Andrew Cagney * device.c (device_tree_parse_integer_property): New function, parse a list of integers as an array property. (device_tree_add_parsed): Call it. * device.c (device_tree_parse_string_property): New function, parse a list of strings as a string property (with embeded null's). For moment, don't try to implement a complext string parser. (device_tree_add_parsed): Call it. Tue Sep 24 16:30:48 1996 Andrew Cagney * hw_opic.c: New file. OpenPIC interrupt controller. * configure.in (hardware): Add opic device. * configure: re-generate. * hw_pic.c: Delete, replaced with hw_opic.c. * debug.h, debug.c: Add debug option for OpenPIC device. - opic-device. Tue Sep 24 16:30:48 1996 Andrew Cagney * Makefile.in (psim.o, idecode.o): Since idecode and not psim is now the file that does all the inlining. * Makefile.in (LIB_SRC, LIB_INLINE_SRC, idecode.o): Break out the library source code that could be involved in an inlining. Make idecode.o only dependant on the inlined library source code. * Makefile.in (LIB_OBJ): Put options last on the list so that it is compiled last. * std-config.h (DEVICE_INLINE): Only inline locals when the default is to inline. Mon Sep 23 00:37:49 1996 Andrew Cagney * hw_htab.c (htab_sum_binary): Determine the real-base for the binary. * hw_htab.c (htab_map_binary): Depending on the value of the load-base, either map the program in as a contiguous section or as separate sections controled by th binaries lma values. (htab_init_data_callback): Ditto. Sun Sep 22 15:56:22 1996 Andrew Cagney * emul_generic.c (emul_add_tree_options): Remove load-base option. * emul_chirp.c (map_over_chirp_note): Add load_base field to note struct. Don't require the load_base field to be present - just issue warning - it is a recent addition. (emul_chirp_create): Support both virtual and physical modes. * emul_chirp.c (emul_chirp_create): Add a stack initialization property so that any arguments specified on the command line can be passed on to user programs. * hw_init.c (create_ppc_chirp_bootargs): Add support for chirp argument passing to the pseudo device stack. Sat Sep 21 19:39:56 1996 Andrew Cagney * device.c (device_error): Make it more tolerant to incomplete devices. * hw_init.c (hw_data_init_data_callback): Extend the data device so that it can perform initialization operations either dma or a more complex instance open, seek, write operation. * hw_init.c: Update the description of the data device to reflect this. Sat Sep 21 00:13:02 1996 Andrew Cagney * device.c (device_event_queue_schedule, device_event_queue_deschedule, device_event_queue_time): Have the device object export the event operations. Making these available from the device object should hopefully simplify writing device models. Fri Sep 20 14:04:40 1996 Andrew Cagney * configure.in (sim-hardware): Add eeprom device to default build. * hw_eeprom.c: Rewrite so it works. * debug.h, debug.c: Add tracing support for the eeprom and com devices. Thu Sep 19 14:40:40 1996 Andrew Cagney * debug.h: Add disklabel-package and disk-device trace options. debug.h (PTRACE): Add macro to simplify tracing in packages. Thu Sep 19 14:40:40 1996 Andrew Cagney * device.c (device_create_instance_from): Tighten up loop searching for device instances. (device_instance_delete): Ditto. (device_instance_delete): Only leaf instances need to be removed from a devices list of active instances. Thu Sep 19 14:40:40 1996 Andrew Cagney * hw_disk.c: Add the cdrom as an alias. * pk_disklabel.c (disklabel_delete): Implement, remembering to delete the raw disk instance while we're at it. * pk_disklabel.c (pk_disklabel_create_instance): Implement a little bit more - still a long way to go. * pk_disklabel.c (disklabel_write, disklabel_read): Remember the new head position after a read or write. Thu Sep 19 13:05:40 1996 Andrew Cagney * emul_chirp.c (chirp_emul_read): Allow reads to be longer then the internal buffer. Thu Sep 19 13:05:40 1996 Andrew Cagney * emul_chirp.c (chirp_read_t2h_args): Call memset-0 with the args in the correct order. * emul_chirp.c (chirp_emul_call_method): Correct computation for the address of the first stack argument passed in from the client program. Wed Sep 18 19:33:54 1996 Andrew Cagney * words.h: Add new types signed_cell and unsigned_cell which correspond to the signed and unsigned IEEE 1275 memory locations. * device.h, device.c, emul_chirp.c: Where refering to an IEEE 1275 memory cell, replace uses of unsigned32 with unsigned_cell. * device_table.h: Ditto. * sim-endian.h: Add new macros H2BE_cell and BE2H_cell which convert cell sized values to from big endian. * device.c, emul_chirp.c: Where refering to IEEE 1275 memory cells use these new macros. Tue Sep 17 15:57:44 1996 Andrew Cagney * device.c (device_tree_add_parsed): Detect and report an interrupt being attached to an invalid device. Was dumping core. Mon Sep 16 23:09:12 1996 Andrew Cagney * device.h, device.c (device_address_to_attach_address, device_size_to_attach_size): New functions. Convert a devices unit address or unit size structure into a form suitable for passing on to the attach and detach functions. * device_table.h: Add extra methods to device table. * device.h, device.c (device_find_reg_property): New function. For a reg type property, return the selected address + size tupple, along with a positive success status. Add a reg_property to the list of property types. * (device_tree_add_parsed): Make array properties with the name reg or alternate-reg of type reg_property. * hw_memory.c (hw_memory_init_address): Rewrite to use new find_reg_property method. * hw_nvram.c (hw_nvram_init_address): Ditto. * device.c (device_tree_print_device): Add code to print out a reg property. * device_table.c (generic_device_address_to_attach_address, generic_device_size_to_attach_size ): New functions. Generic functions for converting between unit and attach address or size. * device_table.c (generic_device_init_address): Rewrite to use the new find_reg and address convert functions. Look for both reg and alternate-reg properties. Mon Sep 16 23:09:12 1996 Andrew Cagney * hw_com.c: New file. A '550 serial device that can quickly be attached to any bus. * configure.in (enable-sim-hardware): Add the com device. * configure: re-generate. Thu Sep 12 17:30:56 1996 Andrew Cagney * device.c (device_tree_verify_reg_unit_address): New function. Check that the unit address as specified by the reg property correctly corresponds to any unit address previously specified by the devices name. (device_tree_add_parsed): When adding a reg property, verify that the unit-address - first value of property - correctly matches any previous value specified when creating the device node. Thu Sep 12 17:30:56 1996 Andrew Cagney * mon.c (mon_event): Remove assertion that an unsigned is >= 0. Fri Aug 16 12:05:24 1996 Michael Meissner * device.c (device_full_name): Cast strdup to char *, since AIX 3.2.5 mistakenly declares the function to be const char *. (device_create_from): Ditto. (device_create_instance_from): Ditto. (device_add_property): Ditto. Tue Aug 13 11:40:14 1996 Michael Meissner * debug.c (trace_option): For -t all, do not set the trace_dump_device_tree flag, so that the simulator is run. Tue Aug 13 11:40:14 1996 Michael Meissner * Makefile.in (options.o): Depend on defines.h. (defines.h): New rule, go through config.h and make strings of all of the #define HAVE_xxx macros. (distclean): Remove defines.h. * options.c (print_options): Print whether many of the configuration macros are defined. * main.c (main): If -t options and no filename, just print the options, and don't print the usage message. Mon Aug 12 18:42:37 1996 Michael Meissner * configure.in: Test whether /dev/zero works on the system, and if it does, define HAVE_DEVZERO. * configure: Regenerate. * emul_generic.c (emul_add_tree_hardware): Do not add /iobus/disk if we don't have a working /dev/zero on the system. * emul_bugapi.c (emul_bugapi_init): If HAVE_DEVZERO is not defined, don't add disk support. (emul_bugapi_do_diskio): Ditto. (emul_bugapi_instruction_call): Ditto. Wed Aug 7 14:34:20 1996 Michael Meissner * emul_unix.c (HAVE_TCGETATTR): If HAVE_TERMIOS_STRUCTURE is not defined, make sure HAVE_TCGETATTR is #undef'ed Wed Aug 7 14:34:20 1996 Michael Meissner * std-config.h (REGPARM): Only define REGPARM attributes if using GNU C. Test for __i686__ in case GCC ever defines it. If not on a x86 platform, define REGPARM as nothing. * sim-endian.h (WITH_HOST_BYTE_ORDER): Test for i686 and __i686__ also. Wed Aug 7 20:19:55 1996 Andrew Cagney * ld-decode.h, ld-decode.c: Rename goto_gen to the more correct goto_switch_gen. * gen-idecode.c: Ditto. * gen-idecode.c (print_idecode_table): Comment out check for switch/table combination until a bug with it is fixed. * ppc-opcode-goto: New file. Like complex and flat but uses goto-switch instead of padded-switch for the tables. * gen-idecode.c (print_goto_switch_name): New function. (print_goto_switch_table_leaf): New function. (print_goto_switch_break): New function. (print_goto_switch_table): New function. Prints a jump table that can be jumped into instead of a switch statement. * gen-idecode.c (*switch_*): As an option output a switch that is implemented using a jump table but only if the switch is not boolean. Tue Aug 6 09:28:22 1996 Michael Meissner * configure.in (--enable-sim-{hardware,packages}): Fix typos. * configure: Regenerate. * device.c (device_instance_call_method): Fixup format message in error case. Return 0 in case of error to shut up compiler warnings. Wed Aug 7 00:17:37 1996 Andrew Cagney * device_table.c (generic_device_unit_decode): Require a comma between elements of a unit address. * device.c (device_tree_print_device): For reg, alternate-reg and ranges properties use special print functions. (device_print_ranges_property): Print formatted ranges property. (device_print_reg_property): Print formatted reg property. Tue Aug 6 21:35:18 1996 Andrew Cagney * device.c (device_tree_add_parsed): For reg, ranges and alternate-reg properties use a special parser. (device_tree_parse_reg_property): New function to parse a reg property. (device_tree_parse_ranges_property): New function to parse a ranges property. (device_encode_unit): Wrapper for encode_unit callback. (device_decoce_unit): Wrapper for decode_unit callback. Wed Jul 31 00:02:30 1996 Andrew Cagney * device_table.h (device_instance_callbacks): Relace the claim and release methods with a more general table mapping from method-name to method-function. * device.c (device_instance_call_method): New function. Implement the OpenBoot call-method client interface. Attempts to locate the instances method in the callback table. (device_instance_claim, device_instance_release): Delete. Replaced with call-method and a lookup table. * emul_chirp.c (chirp_emul_call_method): Use the new device instance call method and let that handle a client claim call. * hw_htab.c (claim_memory): Wrapper function to call the memory devices "claim" method using the new device-instance call-method interface. Replaces the previous direct calls to claim. (htab_map_region): Use claim_memory. (htab_init_data_callback): Ditto. * hw_memory.c (hw_memory_instance_claim): Update function interface so that it is compatible with call-method. (hw_memory_instance_release): Ditto. (hw_memory_instance_methods): New table of memory specific methods claim and release. Add to the hw_memory_callback table. Tue Jul 30 21:26:14 1996 Andrew Cagney * psim.c (psim_init): Back out of change to initial value of system->last_cpu. Tue Jul 30 21:12:24 1996 Andrew Cagney * sim_callbacks.h (sim_io_printf_filtered): Replace printf_filtered with a local simulator specific version. Add #define printf_filtered to simplify updating of existing code. * sim_callbacks.h (sim_io_write_stdout, sim_io_read_stdin, sim_io_write_stderr): New functions. Read / write to the simulations stdin and stdout and stderr interfaces. Merge in code from hw_pal that previously handled async I/O. (sim_io_flush_stdoutput): Rename flush_stdoutput. Add #define flush_stdoutput to simplify updating of existing code. * hw_pal.c (scan_hw_pal, write_hw_pal, hw_pal_instance_write_callback): Use the new sim_io functions. * main.c: Implement standalone versions of the new sim_io functions. Include support for async I/O. * sim_calls.c: Ditto. This time using the gdb callback table. * std-config.h (CURRENT_STDIO, current_stdio): New macro. Set up stdio configuration so that it works in the same way as the rest of the simulation. * psim.c (psim_create): Initialize current_stdio from the device tree. * emul_generic.c (emul_add_tree_options): Enter a default value for use-stdio in the device tree. Fri Jul 26 19:43:03 1996 Andrew Cagney * gen-idecode.c (print_jump): Was always generating a jump back to idecode. Only necessary at tail of semantic code. (print_jump): Was always setting the processor's cia, even during startup when the processor was still undefined. (print_jump): For safety, restart smp loop when cpu_nr >= nr_cpus, not just equal. * options.c (print_options): Add printing of WITH_REGPARM and WITH_STDCALL. * std-config.h (WITH_REGPARM, WITH_STDCALL): Provide default (disabled) values if not defined. Fri Jul 26 00:36:35 1996 Andrew Cagney * ppc-cache-rules (cache): Change RS and RB to cache instead of compute. The block move instructions use them. * idecode_expression.h (FPSCR_SET): New macro, set specific FPSCR register. (CR_FIELD): New macro, extract specific CR register. (FPSCR_FIELD): New macro, extract specific FPSCR register. * registers.h (GPR): New macro, simplify accesses to GPR[i]. * bits.c (INSERTED): Covert INSERTED macro into a function. (EXTRACTED): Conditionally compile on correct bit size macro. * bits.h (BIT8): New macro, set a single bit in an 8 bit byte. * ppc-instructions: With hints from Paul Martin, type in missing some instruction semantics. Leave disabled for the moment. (Load Multiple Word): Ditto. (Store Multiple Word): Ditto. (Load String Word Immediate): Ditto. (Load String Word Indexed): Ditto. (Store String Word Immedate): Ditto. (Store String Word Indexed): Ditto. (Move to Condition Register from XER): Ditto. (Move From Condition Register): Ditto. (Move From FPSCR): Ditto. (Move to Condition Register from FPSCR): Ditto. (Move To FPSCR Field Immediate): Ditto. (Move To FPSCR Fields): Ditto. (Move To FPSCR Bit 0): Ditto. (Move To FPSCR Bit 1): Ditto. Thu Jul 25 22:10:40 1996 Andrew Cagney * std-config.h (SEMANTICS_INLINE): By default, mask out the inlining of semantic functions from DEFAULT_INLINE. Almost all configurations call the semantic code via a pointer so there is little benefit. * std-config.h (ICACHE_INLINE): Ditto. Thu Jul 25 20:07:30 1996 Andrew Cagney * configure.in (sim_regparm): Add configuration option for enabling GCC's regparm attribute. * (sim_stdcall): Add configuration option for enabling GCC's stdcall attribute. * Makefile.in (REGPARM_CFLAGS): Pass regparam configuration onto compilations. * (STDCALL_CFLAGS): Pass stdcall configuration onto compilations. * std-config.h (REGPARM): Extend construction of REGPARM macro so that it can include __stdcall__ function attribute. Wed Jul 24 19:04:20 1996 Andrew Cagney * options.c (print_options): Include SUPPORT_INLINE in information dump. * gen-idecode.c (print_run_until_stop_body): Only generate loop termination test if creating idecode_run_until_stop. Push the loop termination test back into each alternative branch. Wed Jul 24 15:47:09 1996 Andrew Cagney * gen-icache.c (print_icache_function): Have the cache function always update the cache_entries semantic and address fields. * gen-idecode.c (print_idecode_switch_illegal): Include a break when generating illegal instructions. This was commented out which is a hangover from looking a at switch statements generated using indirect jumps. Tue Jul 23 20:57:01 1996 Andrew Cagney * igen.c (print_my_defines): Replaces print_define_my_index. Print both a definition for MY_INDEX and MY_PREFIX. * gen-icache.c (print_icache_function): Adjust. * gen-idecode.c (print_jump_insn): Adjust. * gen-semantics.c (print_c_semantic): Adjust. * gen-support.c (gen_support_h): Add optional include to created support.h so that, like cpu, it is optionally inlined for all modules that include it. * inline.h, inline.c: Adjust so that support.[hc] is handled the same as cpu.[hc]. * idecode_fields.h (LABEL, GOTO): Macro's that create a unique name for a lable and then branch to it. * ppc-instructions (convert_to_integer, Floating Round to Single-Precision, Floating Convert from Integer Doubleword): Use LABEL and GOTO instead of the recently added switch statements. Wed Jul 24 14:02:42 1996 Andrew Cagney * gen-idecode.c (print_run_until_stop_body): Too many rparen in generated code. Tue Jul 23 20:57:01 1996 Andrew Cagney * configure.in (--enable-sim-line-nr): Typo - sim_line-nr. * (--enable-sim-inline): Reorder patern matching of arguments so that SUPPORT=ALL_INLINE is reconized as *=* and not *_INLINE. * configure: rebuild. Mon Jul 22 23:25:08 1996 Andrew Cagney * configure.in (--enable-sim-hardware, --enable-sim-packages): New configuration options. Let the user specify the packages or hardware devices that are to be included in the build. Makes it possible for user packages to be specified. * Makefile.in (tmp-pk, tmp-hw): Just use the list of packages and hardware instead of checking it using ls. configure.in should have taken care of any problems. (HW_SRC, HW_OBJ, PACKAGE_SRC, PACKAGE_OBJ): Set by configure. Mon Jul 22 22:38:59 1996 Andrew Cagney * psim.c (psim_options): Enter the argument to the memory size option directly into the device tree. Was using atol() which is dangerously non portable. Mon Jul 22 22:17:08 1996 Andrew Cagney * configure.in (icache): Extend icache flag to include an insn option. If specifyed the insn - aka instruction - is included in the instruction cache. Make this the default. * configure: re-generate. * igen.c (main), igen.h: Add option -S - inSn - for specifying that the instruction should be included in the icache. * gen-icache.c (print_icache_body): If enabled, output code to put the instruction into the icache. (print_icache_struct): If enabled, add insn to the icache struct. Mon Jul 22 20:46:12 1996 Andrew Cagney * Makefile.in (BUILD_CFLAGS): Include -g when building the generators. Mon Jul 22 20:00:25 1996 Andrew Cagney * emul_generic.c (emul_add_tree_options): Was incorrectly setting the strict-alignment option when hardwired for non-strict alignment. Sun Jul 21 21:18:05 1996 Andrew Cagney * gen-semantics.c: Make the my_index variable a macro MY_INDEX. * ppc-instructions: Adjust so that references are to MY_INDEX and not my_index. Sun Jul 21 21:18:05 1996 Andrew Cagney * gen-idecode.c: Output the complete run_until_stop function instead of just the code to handle a single instruction issue. * : Have the generated idecode.c include inline.c (instead of psim.c). * std-config.h: Change psim.c so that it isn't inlined (as this is no longer needed). * psim.c (run_until_stop): Delete the old run_until_stop function instead calling the idecode_run and idecode_run_until_stop functions that gen-idecode.c is now creating. Sun Jul 21 21:18:05 1996 Andrew Cagney * dgen.c: Maintenance - update to use new features found in lf.c. * filter_filename.c (filter_filename): Maintenance - make the string constant. Sun Jul 21 21:18:05 1996 Andrew Cagney * debug.c (TRACE, ITRACE, DTRACE): Have GCC instead of CPP eliminate trace statements. * debug.c: Change trace format so that it is consistent (file:line-nr) with CC's error output. * gen-itable.c (itable_c_insn): Add the source file name and source line number to the instruction's informational entry. * debug.c (ITRACE): Use the itable (and my_index) to get the current instructions name and source line number. * gen-semantics.c, gen-icache.c: Adjust generated ITRACE calls to match new interface. * emul_bugapi.c (emul_bugapi_instruction_call): Adjust corresponding call to ITRACE so that it still matches. * idecode_expression.h (ALU_END, CR0_COMPARE): Use TRACE instead of ITRACE. The CPP line directives would have previously set the line-nr and file name so ITRACE isn't needed. Sun Jul 21 21:18:05 1996 Andrew Cagney * gen-idecode.c (print_jump_until_stop_body): New function and idecode generation option. Instead of generating and calling separate functions containing the semantic and icache code generate a single monolythic function and use goto's (and GCC's indirect jump) to move between code blocks. * Makefile.in: Add sim_jump flag to those passed to igen. * configure.in: New option --enable-sim-jump (default disabled) * ppc-instructions: Eliminate any uses of labels and goto's. These result in duplicate declarations when a single flat function is being create. * ppc-opcode-jump: New file. Set of opcode rules useful when testing jumping idecodes. Sun Jul 21 21:18:05 1996 Andrew Cagney * gen-idecode.c: Optionally include the semantic code for an instruction in the function that is doing the decoding. * igen.c: Add option (-C) to generate semantics in the instruction decode functions. * configure.in (--enable-sim-icache): Accept an option list such as 1024,define. Add a new choice to the list - semantic - which will cause igen to generate instruction decode functions that include the corresponding semantic code. Sun Jul 21 21:18:05 1996 Andrew Cagney * configure.in: New option --enable-sim-line-nr (default enabled). Enable/disable the inclusion of CPP line directives in the generated files. Such directives refer back to the source files used when generating the simulator code. * Makefile.in (sim_line_nr): Pass to igen. Sun Jul 21 21:18:05 1996 Andrew Cagney * igen.c (main): Revamp the options so that more letters are available. * configure.in: Adjust to match igen's revamped options Sun Jul 21 21:18:05 1996 Andrew Cagney * Makefile.in (pk.h, hw.h): Rewrite depenencies for hw.h (etc) so that they use the same technique as igen (ie a dummy targets tmp-pk and tmp-hw are created). Mon Jun 24 22:28:00 1996 Andrew Cagney * Makefile.in (BUILD_CFLAGS): Include WARNING_CFLAGS. Wed Jun 19 21:45:28 1996 Andrew Cagney * ld-cache.[hc], ld-decode.[hc], ld-insn.[hc]: New files. Separate out the loading of each of the tables from the rest of igen. * Makefile.in: Adjust. * igen.c: Adjust. * gen-icache.[hc], gen-idecode.[hc], gen-itable.[hc], gen-model.[hc], gen-semantics.[hc]: New files. Separate out the code creating each separate set of generated files. * Makefile.in: Adjust. * igen.c: Adjust. * gen-support.[ch]: New files. Output the support functions (found in the ppc-instructions file) into a separate file. * Makefile.in: Add. * inline.h, inline.c: Add. * std-config.h: Add. * ld-cache.c: Re-design the cache table format. * ppc-cache-rules: Update to new format. * ld-decode.c: Re-design the decode table format. * ppc-opcode-simple: Update to new format * ppc-opcode-complex: Ditto * ppc-opcode-flat: Ditto * filter.h, filter.c: New files. Separate the opcode filter table reading code from the rest of igen.c. Re-design the filter so that it works inclusivly not exclusivly. * igen.c: Remove the opcode filter table loading code. * Makefile.in (filter.o): Adjust * configure.in: Adjust filter flag so that default includes 32bit and floating point. * ppc-instructions: Clean up filter fields so that only in use entries are specifed (ie delete `be'). * misc.c (name2i, i2name): New function. Map between a string and an integer value. Mon Jun 17 20:08:03 1996 Andrew Cagney * sim_calls.c (sim_close): If simulator not created, skip printing of run information. Mon Jun 17 20:08:03 1996 Andrew Cagney * registers.c (register_description): Typo, insns not insn. * ppc-instructions (model_get_number_of_stalls): New model function, returns number of stalls for the specified processor. * psim.c (psim_read_register): Add call to new function model_get_number_of_stalls(). * ppc-instructions (model_get_number_of_cycles): New model function, returns number of stalls for the specified processor. * psim.c (psim_read_register): Add call to new function model_get_number_of_cycles(). Fri Jun 14 00:11:56 1996 Andrew Cagney * device_table.h: Don't pass the parent device into a devices create function. This makes the create function consistent with the documentation. * device.c (device_template_create_device): Ditto * hw_pal.c (hw_pal_create): Ditto * hw_core.c (hw_core_create): Ditto * hw_vm.c (hw_vm_create): Ditto * hw_disk.c (hw_disk_create): Ditto * hw_nvram.c (hw_nvram_create): Ditto * hw_memory.c (hw_memory_create): Ditto * hw_cpu.c (hw_cpu_create): Ditto. * device.c (split_find_device): Allow a null initial parent device. (device_template_create_device): Ditto. * device.c (device_create_from): Make local (static) only used within device.c. * device_table.h: typedef device_callbacks moved here (from device.h) where it belongs. * hw_core.c: New file. Implements just the core device using the core object. * corefile.c: Moved all core device functions into the new hw_core.c file. core_device_create() disapears. * psim.c (psim_tree): Use device_tree_add_parsed() to create the core device. Thu Jun 13 00:09:29 1996 Andrew Cagney * hw_init.c: Correct typo in comment. * corefile.c (core_init): Remove any remaining references to a default map. (core_map_find_mapping): Ditto. Wed Jun 12 22:30:32 1996 Andrew Cagney * corefile.c (core_init): Make function global so that other devices are able to use the full core object. * corefile.c (core_create, core_from_device): Break core_create into two functions. The first creates a core object, the second returns the core object associated with a core device. * corefile.c (core_device_create): Use core_create to make the core object. * psim.c (psim_create): Use core_from_device() instead of core_create(). * device.c (device_template_create_device): Make static as only needed by functions internal to device.c. Fri Jun 7 23:47:18 1996 Andrew Cagney * ppc-opcode-test-2: Remove description of fields. * ppc-opcode-complex: Ditto * ppc-opcode-flat: Ditto * ppc-opcode-simple: Ditto * ppc-opcode-stupid: Ditto * ppc-opcode-test-1: Ditto * ppc-cache-rules: Ditto * igen.c: Add description of files as a comment at the front. Wed Jun 26 12:50:33 1996 Michael Meissner * configure.in: Check for whether the termios and termio structures are really defined, and whether or not, they define the c_line field. * configure: Regenerate. * Makefile.in ({,TERMIO_}CFLAGS): Add TERMIO_CFLAGS options set by configure. * emul_unix.c: Various changes to allow for building on systems with different termio and termios structures. If host has both termio and termios, just use termios. No longer include sys/ioctl.h. Wed Jun 26 12:26:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. (docdir): Removed. * configure.in (AC_PREREQ): autoconf 2.5 or higher. (AC_PROG_INSTALL): Added. * configure: Rebuilt. Wed Jun 5 23:53:42 1996 Andrew Cagney * corefile.h: Rewrite documentation so that it can be extracted and converted into texinfo (and hence ready for translation into html, tex or nroff). * device.h: Ditto Thu Jun 6 09:52:37 1996 Michael Meissner * hw_disk.c (SEEK_SET): If SEEK_SET is not defined, define as 0. Wed Jun 5 11:46:52 1996 Andrew Cagney * hw_disk.c: Include if available. Under SunOS, that is the source of SEEK_SET. Wed Jun 5 01:39:07 1996 Andrew Cagney * psim.c (psim_options): Correct type of dummy arguments being passed to a device_ioctl call. * hw_init.c (hw_data_init_data_callback): Adjust printf arguments. (write_stack_arguments): Ditto. * hw_trace.c: Instance callback entry no longer a table. Wed Jun 5 01:39:07 1996 Andrew Cagney * emul_unix.c (do_unix_umask): Cast printf argument. (convert_to_linux_termios): Use LINUX_VSWTC not LINUX_VSWCH Mon Jun 3 15:02:04 1996 Michael Meissner * hw_init.c (update_for_binary_section): Abort if we find an .interp section, which indicates the need for shared libraries to be loaded. Mon Jun 3 15:02:04 1996 Michael Meissner * emul_unix.c (do_unix_{time,gettimeofday,getrusage}): Add support for time, gettimeofday, and getrusage system calls. ({solaris,linux}_descriptors): Add new system calls. (do_get{,e}{uid,gid}): Use gid_t/uid_t types. (do_get{,p}pid): Use pic_t types. * configure.in (AC_TYPE_{GETGROUPS,SIGNAL}): Define. (AC_TYPE_{MODE,OFF,PID,SIZE,UID}_T): Define. * config{.in,ure}: Regenerate. Mon Jun 3 23:19:57 1996 Andrew Cagney * emul_netbsd.c (emul_netbsd_create): Use the more specific names `ppc-elf' and `ppc-xcoff' for the stack-type. * emul_unix.c (emul_unix_create): Ditto. * emul_bugapi.c (emul_bugapi_create): Ditto. * hw_init.c: Reconize the new names. * emul_unix.c (do_unix_break): Adjust so that the updated ioctl call is used (no system parameter). Sun Jun 2 11:21:17 1996 Michael Meissner * emul_unix.{h,c}: New files to provide Solaris and Linux system call emulations. * Makefile.in (LIB_{SRC,OBJ}): Add emul_unix.{c,o}. (os_emul.o): Depend on emul_unix.h. (emul_unix.o): New dependency. * configure.in (--enable-sim-alignment): Add 0|default to mean set alignment to 0, which means use appropriate alignment for mode. (AC_CHECK_FUNCS): Add new functions needed by emul_unix.c. (AC_CHECK_HEADERS): Add new include files needed by emul_unix.c. * config.in: Regenerate. * configure: Regenerate. * emul_generic.c (emul_write2_status): New function to return results in r3 and r4 for Solaris system calls. (emul_do_system_call): If the system call is not support, but there is a string for the system call name, print out the string instead of the system call number. * emul_generic.h (emul_write2_status): Declare it. * emul_netbsd.c: Use /* */ around comment on #endif. * os_emul.c: Include emul_unix.h. (os_emulations): Add emulations for Solaris, and Linux. * psim.c (psim_usage): Add message about solaris, linux emulations. Thu May 30 00:00:10 1996 Andrew Cagney * hw_iobus.c: Tidy up notes so that they can be auto-extracted. * README: Correct PSIM's title Wed May 29 23:50:26 1996 Andrew Cagney * basics.h: New global type object_disposition, used to indicate the status of objects when things are restarted. Fri May 17 17:28:52 1996 Andrew Cagney * device_table.h: Change the interrupt descriptor structure so that it includes an additional member - an upper bound on the interrupts by that name. * device.c (device_interrupt_decode): Allow a range of interrupt ports (eg rst0 .. rst6) if the port descriptors bound is non zero. * device.c (device_tree_print_device): Include a list of valid interrupt ports when listing supported devices. * device.h, device.c (device_child_interrupt_*): Delete. Not used. * emul_generic.c (emul_add_tree_hardware): Modify the creation of the interrupt net so that it uses int0 .. intN. Tue May 14 23:03:53 1996 Andrew Cagney * device.h, device.c (device_ioctl): Drop the system argument. Devices can not obtain this using the device_system() call. * device_table.h: Adjust accordingly. * hw_*.c: Adjust accordingly. * emul_netbsd.c (do_break): Adjust call to vm device accordingly. * psim.c (psim_options): Use a device_ioctl call to force the hw_trace device to update the trace options. * hw_trace.c: Replace the init function with an ioctl call. Adjust doc accordingly. * psim.c (psim_init): Re-order initialization so that the os-emulation is initialized after the device tree. Without this, os-emul's are not able to create instances or access properties that contain an instance handle. * device.h, device.c (device_add_*_property): Make these functions internal to device.c. The user has access to the more generic device_tree_add_parsed function. Differentiate between the initial and current value for each property. * (clean_device_properties): New function that deletes any properties created after the start of a simulation and restores the initial value of any others (ignoring ihandles). * (init_device_properties): (Re)Initialize any properties that contain ihandles. create * (device_tree_init): Include calls to clean the device tree's properties and then initialize them. Document this in the device.h file. Mon May 6 17:36:15 1996 Andrew Cagney * interrupts.c (decrementer_interrupt): Always pend a decrementer interrupt even if it is not yet possible to deliver it. Wed May 1 12:26:51 1996 Andrew Cagney * mon.h, mon.c (mon_get_number_of_insns): Make this externally visable adjusting the arguments so that the interface is correct. (mon_print_info): Adjust calls. * registers.h, registers.c (register_description): Add phony cycle, insn and stall registers. * psim.c (psim_read_register): Return nr of instructions for given processor. Tue Apr 30 22:09:09 1996 Andrew Cagney * hw_htab.c: New file. Extract contents from disk_table.c. Contains a device that, during initialization will create a PowerPC htab in memory. * hw_register.c: New file. Extract contents from disk_table.c. Contains a device that, during initialization, will parse its property list and use that to initialize various processor registers (not target specific). * hw_vm.c: New file. Extract contents from disk_table.c. Contains a device that handles accesses to invalid virtual memory addresses (in user mode). * hw_init.c: New file. Extract contents from disk_table.c. Misc devices that can initialize memory from a file. * hw_trace.c: New file. Extract contents from disk_table.c. Configure trace options from property values. * Makefile.in (hw_htab.o, hw_register.o, hw_vm.o, hw_init.o, hw_trace.c): Add new device files. * device_table.c: Remove above code, now in separate independant files. Fri Apr 26 00:00:07 1996 Andrew Cagney * hw_disk.c: New file. Disk and CDROM device. * Makefile.in (hw_disk.o): Add device hw_disk.c. * pk_disklabel.c: New file. Implement the miss-named disk-label package. * Makefile.in (pk.h): Create the file pk.h that contains a list of all the packages. * Makefile.in (hw.h, hw.c): Add dependancy on Makefile so that they are re-created when the makefile is updated. * emul_generic.c (emul_add_tree_hardware): Add a disk device (below the iobus) to the device tree. Include an ihandle of the disk as /chosen/disk. * emul_bugapi.c (emul_bugapi_create): Don't initialize the input, output and (new) disk handles yet. * (emul_bugapi_init): Initialize the input, output (and just added) disk ihandles here. * (emul_bugapi_do_diskio): New. Performs disk i/o (well at least what I think the behavour is). * emul_bugapi.c (emul_bugapi_instruction_call): Add hook to disk i/o bug call. For RETURN call, exit using gpr[3]'s status even though this isn't part of the spec - makes it possible for machine code to signal the aporting of a simulation run. * emul_chirp.c (chirp_emul_call_method): Add support for the claim/release methods. * (chirp_emul_exit): Add an optional exit status argument to the exit method. Makes it possible for chirp emul simulations to abort upon an error. * device.h, device.c (device_instance_claim, device_instance_release): New methods for claiming and releasing memory. * hw_memory.c: add claim and release memory methods. * hw_*: Use the claim memory method when allocating physical memory. Thu Apr 18 23:38:10 1996 Andrew Cagney * hw_nvram.c (hw_nvram_update_clock): Use the current not previous time when updating the clock. * hw_nvram.c: Tidy up documentation Fri May 24 10:08:10 1996 Michael Meissner * configure.in (AC_STRUCT_ST_{BLKSIZE,BLOCKS,RDEV}): Use these macros to determine whether or not the appropriate st_ fields exist in the stat structure. (AC_CHECK_FUNCS): Check for all unix system calls used, except for the real basic ones like open, read, write, etc. * config{.in,ure}: Regenerate. * emul_netbsd.c: Add support for missing system calls, and/or missing stat fields. (MAXPATHLEN): Undefine if including unistd.h, since sys/param.h might define it. * hw_pal.c (WITH_STDIO): Redefine if O_NDELAY, F_GETFL, or F_SETFL are not defined. (scan_hw_pal): Do not cause syntax error if O_NDELAY, F_GETFL, or F_SETFL not defined. Tue May 21 17:24:45 1996 Michael Meissner * emul_netbsd.c (write_stat): Don't convert st_blocks unless the host is netbsd. Thu May 16 10:56:45 1996 Michael Meissner * configure.in (AC_CHECK_HEADERS): Add sys/ioctl.h. * config{.in,ure}: Regenerate. * emul_netbsd.c: If HAVE_SYS_IOCTL_H is not defined, don't include sys/ioctl.h. Tue May 7 17:28:12 1996 Michael Meissner * hw_pal.c (hw_pal_instance_read_callback): Remove unused variable. * misc.c ({,target_}a2i): Rewrite to not use strtoul. * Makefile.in ({spreg,misc}.o): Add dependency on .c file. ({i,d}gen): Don't link in liberity. Use BUILD_LIBS instead of LIBS. Mon May 6 11:31:43 1996 Michael Meissner * hw_pal.c (hw_pal_instance_read_callback): If using stdio, use fgets to read line. If not using stdio, do a simple blocking read of len bytes. Fri May 3 15:07:42 1996 Michael Meissner * Makefile.in: Correctly build simulator for build machine != host machine. Tue Apr 30 18:46:05 1996 Michael Meissner * configure.in (--enable-hostendian): Rework so the default uses the AC_C_BIGENDIAN results. Only run AC_C_BIGENDIAN if not cross compiling. * configure: Regenerate. * sim-endian.h: Add more tests for host endian to support more platforms in a cross compilation environment. Wed Apr 17 14:38:06 1996 Michael Meissner * hw_pal.c ({scan,write}_hw_pal): If WITH_STDIO == DO_USE_STDIO, use stdio, instead of unpended read/printf_filtered. (hw_pal_instance_write_callback): If WITH_STDIO == DO_USE_STDIO, flush stdout after writing the characters. * options.c (print_options): Print out WITH_STDIO. * Makefile.in (STDIO_CFLAGS): Pass on result of @sim_stdio@ configuration variable. (CONFIG_CFLAGS): Include STDIO_CFLAGS. (hw.{c,h}): Allow for source dir != build dir, and for HW_SRC files to contain directory pieces. * std-config.h (DO{,NT}_USE_STDIO): New flags for whether we should use stdio for console input. (WITH_STDIO): If not defined, define as DONT_USE_STDIO. * configure.in (--enable-sim-stdio): Add new switch to control whether stdio is used for console I/O. * configure: Regenerate. * interrupts.c (external_interrupt): Declare it to be INLINE_INTERRUPTS, not INLINE_CPU. Mon Apr 15 23:30:56 1996 Andrew Cagney * events.c (insert_event_entry): Allow events to be scheduled *NOW* (at delta time 0). Add assertions to clarify behavour of event queue. * events.c (update_time_from_event): New function. Calculates the number of ticks from the next event. Use this. Sun Apr 14 21:39:45 1996 Andrew Cagney * emul_netbsd.c (do_break): Return 0 if success (instead of adjusted break). * device_table.c (vm_ioctl_callback): Don't return adjusted break (isn't needed). Sun Apr 14 21:32:41 1996 Andrew Cagney * device_table.h: Change type of the device ioctl so that it returns an int (status). * device.h (device_ioctl): Ditto. * device.c (device_ioctl): Ditto. * device_table.c (stack_ioctl_callback): Return 0 status. (vm_ioctl_callback): Ditto Sat Apr 13 00:00:24 1996 Andrew Cagney * emul_netbsd.c (do_read): Correctly set the return value. (do_getpid): Ditto. (do_getuid): Ditto. (do_geteuid): Ditto. (do_dup): Ditto. (do_getegid): Ditto. (do_getgid): Ditto. (do_sigprocmask): Ditto. (do_umask): Ditto. (do_dup2): Ditto. (do_gettimeofday): Ditto. (do_getrusage): Ditto. (do_fstat): Ditto. (do_stat): Ditto. (do_lseek): Ditto. (do___sysctl): Ditto. Fri Apr 12 20:56:47 1996 Andrew Cagney * device_table.c (vm_ioctl_callback): Don't access the processor registers directly, instead leave it to the caller to handle this. * emul_netbsd.c (do_break): Which calls vm_ioctl_callback to perform a break. Pass in the new break value and set the registers according to the result. * emul_generic.c (emul_write_status): Change so that r3 contains either status or errno and failure is indicated by SO. Thu Apr 4 23:03:38 1996 Andrew Cagney * emul_bugapi.c (emul_bugapi_create): More strict check of OEA address. Thu Apr 4 20:58:05 1996 Andrew Cagney * interrupts.h (interrupts): New structure contains state of pending interrupts. * cpu.c (cpu_interrupts): New function. Pending interrupt status in the cpu and grant access to it. Add interrupts to cpu structure. Fri Mar 29 22:09:25 1996 Andrew Cagney * device.c (device_tree_add_parsed): Check that the creation of a device instance worked before using it. * psim.c (psim_halt): Remove cia argument from psim_halt. This function does not save the CIA so do not pass it in. Fri Mar 29 21:30:56 1996 Andrew Cagney * hw_pal.c (hw_pal): Merge the halt and icu and console devices found in device_table.c into a single hack pal. * device_table.c (halt, icu, console): Delete. * Makefile.in (hw_pal.o): New dependency. * emul_generic.c (emul_add_tree_hardware): Re-arange device tree so that it uses the pal instead of the icu/halt/console devices. Wire the pal's interrupt ports up to the cpu nodes. Fri Mar 29 20:17:17 1996 Andrew Cagney * hw_iobus.c (hw_iobus_attach_address_callback): Move from device_table.c to here. * Makefile.in (hw_iobus.o): New dependency. Fri Mar 29 12:17:58 1996 Andrew Cagney * emul_bugapi.c (_os_emul_data): Add fields for output, input. (emul_bugapi_create): Create input, output from /chosen/stdin and /chosen/stdout. (emul_bugapi_do_{read,write}): Switch to use device_instance interface. (emul_bugapi_instruction_call): Change calls to emul_bugapi_do_{read,write} to pass device instance argument. Tue Mar 26 14:57:58 1996 Michael Meissner * igen.c (idecode_switch_end): Fix 2/26 change so that an extra default is not written out if a default was already written. * psim.c (psim_{read,write}_register): Use sizeof unsigned_8 to size cooked_buf, not sizeof natural_word, since floating point registers are 8 bytes. Mon Mar 25 22:07:13 1996 Andrew Cagney * configure: Regenerate with autoconf 2.9. Thu Mar 21 00:14:26 1996 Andrew Cagney * device_table.h: Always include string headers. Thu Mar 21 00:06:09 1996 Andrew Cagney * main.c (error): Be careful to not try to print out statistics when the simulation was never created. Sun Mar 17 22:40:57 1996 Andrew Cagney * basics.h: Move the event queue's definition to here so that it can be refered to globally with out importing all of events.h. * psim.h, psim.c (psim_event_queue): New function. Grant access to the simulation event queue. Will make this the single point of access (there is after all only one event queue in the simulation). * cpu.c (cpu_create): Use psim_event_queue to obtain the event queue instead of it being passed in. No longer allow access to the cpu's copy of the event queue. Sun Mar 17 22:40:57 1996 Andrew Cagney * events.h, events.c (event_handler): Remove event_queue from arguments passed to an event handler. That argument is redundant - the `data' should refer to a data structure that contains the event queue if queing is needed. * cpu.c (cpu_decrement_event): adjust * events.c (event_queue_process): adjust Sun Mar 17 22:40:57 1996 Andrew Cagney * device.h, device.c (device_system): New, returns a handle for the system given the device. * device.c (device_address_init): Store a pointer back to the system in each devices node. * device_table.h: Don't pass `system' into each device when it is being initialized, this is now available using device_system(me). * device.c (device_address_init, device_data_init): Adjust. * hw_cpu.c, hw_nvram.c, hw_memory.c, hw_eeprom.c, device_table.c: Adjust. Sun Mar 17 22:40:57 1996 Andrew Cagney * interrupts.c (decrementer_interrupt, external_interrupt): Remember that an interrupt wasn't delivered so that it can be tried again later. * interrupts.c (check_masked_interrupt): New function. (re) checks for the posibility that a recent change to the MSR may have made it possible to deliver an interrupt that was previously masked be the EE bit. * ppc-instructions (mtmsr, mfmsr, rfi): Check for posibility of a pending interrupt being delivered using check_masked_interrupt(). * cpu.c (cpu_decrement_event): Just call decrementer_interrupt() leaving it to that module to handle both interrupt synchronization and masking. * cpu.c (struct _cpu): remove variables that were going to record pending decrementer and external interrupts. Sun Mar 17 22:40:57 1996 Andrew Cagney * hw_cpu.c, hw_cpu.h: New files. Implement a device that sits between the interrupt controller and the simulators internal processor model. Maps device interrupts onto the processor interrupt function calls. Mon Mar 4 06:06:54 1996 Andrew Cagney * hw_nvram.c: NVRAM device that includes a real-time clock that is updated each second. Mon Mar 4 04:18:50 1996 Andrew Cagney * device.h (attach_type): Remove attach_default type address spaces. Will replace with levels of callback memory. * corefile.h, corefile.c (new_core_mapping), corefile.c (core_map_attach): Replace default attach with a layerd callback approach. Sun Mar 3 03:58:46 1996 Andrew Cagney * device.c (split_property_specifier): ensure that only a single property is found. (split_value): New function, parses the value part of a device spec. * device.c (device_tree_add_parsed): Use the interrupt conversion functions to determine the interrupt port numbers. * device_table.h: Add table that maps between an interrupts symbolic name and its port number. * device.h, device.c (device_interrupt_decode, device_interrupt_encode): new functions use the recently added interrupt port name/number tables to perform conversion. Sun Mar 3 03:23:59 1996 Andrew Cagney * device.h, device.c (device_set_array_property, device_set_boolean_property, device_set_ihandle_property, device_set_integer_property, device_set_string_property): New functions - allow the value of a given property to be changed. * device.h, device.c: Re-order declaration and definition of property functions. Sun Mar 3 03:10:22 1996 Andrew Cagney * device.c (device_tree_print_device, device_tree_add_parsed): Remove references to phandle properties. Wed Feb 28 00:43:07 1996 Andrew Cagney - aka Noid * Makefile.in (corefile.o): missing dependency on device_table.h etc. Tue Feb 27 23:59:35 1996 Andrew Cagney - aka Noid * device_table.h: Revamp device init callbacks so that they are a sub structure. * device.c (device_init_data, device_init_address): If an init callback is NULL assume it should do nothing. * device_table.c (ignore_device_init, unimp_device_init): delete as redundant. * device_table.c, hw_memory.c: adjust. * (io): ditto. * (dma): ditto. * (device_instance): ditto. * (ioctl): ditto. * (address nee config_address): ditto. * (interrupt): ditto. Mon Feb 26 21:11:20 1996 Andrew Cagney - aka Noid * igen.c (idecode_switch_end): Output a default entry when the switch statement is perfect. Firstly stops GCC complaining about an incomplete switch and secondly it will be eliminated by a good compiler any way. Mon Feb 26 22:47:15 1996 Andrew Cagney - aka Noid * Makefile.in (hw.h, hw.c): New targets. Create from the list of hw_*.c files. hw.h declares a device descriptor table for each hw device while hw.c lists those tables in a form suitable for the construction of a top leveltable in device_table.c. * Makefile.in (device_table.o): now depends on hw.c a generated table of hw. * device_table.c (device_table): Re-arange the table of devices so that two levels are possible. Make use of hw.c. * device_table.h: ditto. * device.c (device_template_create_device): Handle new two level device lookup table. * device.c (device_usage): ditto. Mon Feb 26 22:24:00 1996 Andrew Cagney - aka Noid * device_table.c: Delete the memory device (moved to hw_memory.c). * hw_memory.c: New file. Just an OpenBoot memory device. Wed Jan 17 21:47:34 1996 Andrew Cagney * device.c (device_init_address): New. Split initialization into two stages, address and address spaces * device.c (device_init_data): New. ... and data or other work. With out this, devices try to modify memory before it as been attached. * device.c (device_tree_init): Update to perform staged initialization. * device.c (device_init): Delete. Wed Jan 17 21:43:09 1996 Andrew Cagney * device_table.c (data_*): Rewrite to make heaver use of property nodes. Allow initialization by different data types. * device_table.c (htab_* pte_*): Rewrite to use properties. * emul_chirp.c (emul_chirp_create): Use * emul_bugapi.c (emul_bugapi_create): Ditto * emul_netbsd.c (emul_netbsd_create): Ditto Wed Jan 17 21:24:50 1996 Andrew Cagney * emul_generic.c (emul_add_tree_options): Annotate existing tree with options that haven't yet been specified. * emul_generic.c (emul_add_tree_hardware): Annotate existing tree with demo devices and properties. * emul_chirp.c (emul_chirp_create): Update to use new device_tree_add_parsed call and additional information now included in the device tree. Use emul_add_tree* functions to add any missing details. * emul_bugapi.c (emul_bugapi_create): Ditto * emul_netbsd.c (emul_netbsd_create): Ditto Wed Jan 17 21:18:27 1996 Andrew Cagney * device.c (device_instance_create): New. Create/delete and operate on instances of a device. * device.c (device_instance_delete): Ditto * device.c (device_instance_read): Ditto * device.c (device_instance_write): Ditto * device.c (device_instance_seek): Ditto * device.c (device_instance_data): Ditto * device.c (device_instance_name): Ditto * device.c (device_instance_path): Ditto * emul_chirp.c (chirp_emul_open): Implement using device_instance. * emul_chirp.c (chirp_emul_close): Ditto * emul_chirp.c (chirp_emul_read): Ditto * emul_chirp.c (chirp_emul_write): Ditto * emul_chirp.c (chirp_emul_seek): Ditto * emul_chirp.c (chirp_read_t2h_args): Read arguments from device. Being careful to convert all from target to host byte order. * emul_chirp.c (chirp_write_h2t_args): Converse. Wed Jan 17 20:07:15 1996 Andrew Cagney * device.c (device_tree_add_parsed): New. Rewrite code to add devices to the device tree so that a single printf style function is used. * device.c (device_tree_add_*): Delete. Replaced by above. * device.c (split_device_specifier): Functions to manipulate a device specifier (path) breaking it into its components * device.c (split_property_specifier): Ditto * device.c (split_device_name): Ditto * device.c (split_find_device): Ditto * device.c (scan_*): Delete * device.c (device_tree_find_device): Rewrite to use above. * device.c (device_add_property): Ditto Wed Jan 17 19:51:56 1996 Andrew Cagney * psim.c(psim_options): Parse the psim options, installing their value in the device tree. Options are now first entered into a device tree and then extracted out again when needed. This allows greater flexability in configuration. * psim.c (psim_tree): Returns a basic device tree ready for parsing by psim_options. * psim.c (psim_usage): New. Give usage to varing levels of detail according to the verbosity. In turn output device and trace usage. * main.c (main): Update to use new system * sim_calls.c (sim_open, sim_do_command): Ditto * psim.c (psim_options): Add `r' option - ram size. * psim.c (psim_options): Add `o' option - openboot tree entry. * psim.c (psim_options): Add `h'/`H' options - more help. * debug.c (trace_usage): Add more detailed help. * device.c (device_usage): New. Output help including a list of the devices currently available in the device table. * device_table.c: Add usage operator to each device. * corefile.c (core_create, core_device_create): Adjust so that the core device is created earlier for psim_tree(). Core can later be created from it. * psim.c (psim_create): Update to handle above way of creating things. Extract all information from the device tree. * device_tree.c (trace_*): New device node, its properties are used to set the value of the trace options. Init this device (in psim_options) when ever the options are updated. Wed Jan 17 19:46:07 1996 Andrew Cagney * debug.h: Add trace_print_info, trace_print_device_tree and trace_dump_device_tree. The first is a replacement for the variable `print_info' found in main.c and sim_calls.c. The latter two enable the dumping of the entire device tree. * debug.c: Add to trace_description table. * main.c (main): Use above trace instead of local variable * sim_calls.c (sim_close): Ditto * device.c (device_tree_print_device): New. Prints the device tree in a format that is consistent with what can be parsed by the device tree load from file code. * psim.c (psim_create): Dump device tree if enabled. If nump selected, exit psim immediatly. Wed Jan 17 19:36:52 1996 Andrew Cagney * corefile-n.h (core_map_read_N): When mapping from an address to a device, do not subtract the devices base. The device its self can do this. Brings the behavour into line with OpenBoot. * corefile-n.h (core_map_write_N): Ditto * corefile.c (core_map_read_buffer): Ditto * corefile.c (core_map_write_buffer): Ditto * device_table.c (console_io_read_buffer_callback): Adjust to handle biased address. * device_table.c (console_io_write_buffer_callback): Ditto Wed Jan 17 18:36:09 1996 Andrew Cagney * device.c (attach_device_interrupt_edge): New. Interrupt model did not allow interrupts to be wired up as a general net (edges). Re-implement so that interrupt events can be passed to multiple controllers and interrupt controllers can further propogate interrupt events. * device.c (attach_device_interrupt_edge) : New, Ditto * device.c (detach_device_interrupt_edge) : New, Ditto * device.c (clean_device_interrupt_edges) : New, Ditto * device.c (device_interrupt_event) : New, Ditto * device.c (device_interrupt_attach) : New, Ditto * device.c (device_interrupt_detach) : New, Ditto * device.c (device_child_interrupt_attach) : New, Ditto * device.c (device_child_interrupt_detach) : New, Ditto * device.c (device_attach_interrupt) : Delete old * device.c (device_detach_interrupt) : Delete old * device.c (device_interrupt) : Delete old * device.c (device_interrupt_ack) : Delete old * device_table.c (unimp_*) : Update to match * device_table.c (icu_io_write_buffer_callback) : Update to use interface. * device_table.c (icu_interrupt_event_callback) : Ditto Wed Jan 17 18:18:40 1996 Andrew Cagney * device.c (external_to_device) : New function that provides a standard mapping between a devices internal representation (a pointer) and its external (or what is passed to a client) representation (a phandle). Implement using the cap object attached to the root node. * device.c (device_to_external) : Ditto * device.c (external_to_device_instance) : Ditto but for ihandle and device instance. * device.c (device_instance_to_external) : Ditto * Makefile (device.o): Add dependency on cap. * emul_chirp.c (struct _emul_chirp_data) : Elimate use of cap. Code needing to translate between internal and external representations changed to use the external_to_device et.al. device operations. * emul_chirp.c (chirp_emul_*) : Ditto * Makefile (emul_chirp.o): Remove dependency on cap Sat Jan 6 10:13:26 1996 Andrew Cagney - aka Noid * emul_chirp.c (map_over_chirp_note): Tighten up (and fix) checks on OpenBoot note section. Fri Jan 5 20:28:53 1996 Andrew Cagney * emul_generic.c (emul_write_buffer): Use vm faulting byte read/write calls for buffer transfers. This will cause a fault to occure if the transfer fails. CHRP catches the fault while the others suffer the consequences. (emul_read_buffer): Ditto. (emul_write_word): Ditto. (emul_read_word): Ditto. (emul_read_string): Ditto. Fri Jan 5 18:55:34 1996 Andrew Cagney * emul_chirp.c (emul_chirp_create, emul_chirp_instruction_call), emul_generic (emul_blr_instruction): Use a real blr instruction to return from a client service call. * emul_chirp.c (services): Add all OpenBoot services to table. * emul_generic.h, emul_bugapi.c (emul_bugapi_create), emul_chirp.c (emul_chirp_create) : Use names instead of numbers for instructions being stored in memory. Fri Jan 5 18:52:28 1996 Andrew Cagney * Makefile.in (maintainer-clean): Remove .log, core and *.core (From NetBSD) files. Wed May 29 22:57:40 1996 Andrew Cagney * ChangeLog.00, ChangeLog: ChangeLog from gdb-4.16 becomes ChangeLog.00