/* interrupts.c -- 68HC11 Interrupts Emulation Copyright 1999, 2000, 2001, 2002, 2003, 2007 Free Software Foundation, Inc. Written by Stephane Carrez (stcarrez@nerim.fr) This file is part of GDB, GAS, and the GNU binutils. GDB, GAS, and the GNU binutils are free software; you can redistribute them and/or modify them under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GDB, GAS, and the GNU binutils are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this file; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "sim-main.h" #include "sim-options.h" static const char *interrupt_names[] = { "R1", "R2", "R3", "R4", "R5", "R6", "R7", "R8", "R9", "R10", "R11", "SCI", "SPI", "AINPUT", "AOVERFLOW", "TOVERFLOW", "OUT5", "OUT4", "OUT3", "OUT2", "OUT1", "INC3", "INC2", "INC1", "RT", "IRQ", "XIRQ", "SWI", "ILL", "COPRESET", "COPFAIL", "RESET" }; struct interrupt_def idefs[] = { /* Serial interrupts. */ { M6811_INT_SCI, M6811_SCSR, M6811_TDRE, M6811_SCCR2, M6811_TIE }, { M6811_INT_SCI, M6811_SCSR, M6811_TC, M6811_SCCR2, M6811_TCIE }, { M6811_INT_SCI, M6811_SCSR, M6811_RDRF, M6811_SCCR2, M6811_RIE }, { M6811_INT_SCI, M6811_SCSR, M6811_IDLE, M6811_SCCR2, M6811_ILIE }, /* SPI interrupts. */ { M6811_INT_SPI, M6811_SPSR, M6811_SPIF, M6811_SPCR, M6811_SPIE }, /* Realtime interrupts. */ { M6811_INT_TCTN, M6811_TFLG2, M6811_TOF, M6811_TMSK2, M6811_TOI }, { M6811_INT_RT, M6811_TFLG2, M6811_RTIF, M6811_TMSK2, M6811_RTII }, /* Output compare interrupts. */ { M6811_INT_OUTCMP1, M6811_TFLG1, M6811_OC1F, M6811_TMSK1, M6811_OC1I }, { M6811_INT_OUTCMP2, M6811_TFLG1, M6811_OC2F, M6811_TMSK1, M6811_OC2I }, { M6811_INT_OUTCMP3, M6811_TFLG1, M6811_OC3F, M6811_TMSK1, M6811_OC3I }, { M6811_INT_OUTCMP4, M6811_TFLG1, M6811_OC4F, M6811_TMSK1, M6811_OC4I }, { M6811_INT_OUTCMP5, M6811_TFLG1, M6811_OC5F, M6811_TMSK1, M6811_OC5I }, /* Input compare interrupts. */ { M6811_INT_INCMP1, M6811_TFLG1, M6811_IC1F, M6811_TMSK1, M6811_IC1I }, { M6811_INT_INCMP2, M6811_TFLG1, M6811_IC2F, M6811_TMSK1, M6811_IC2I }, { M6811_INT_INCMP3, M6811_TFLG1, M6811_IC3F, M6811_TMSK1, M6811_IC3I }, /* Pulse accumulator. */ { M6811_INT_AINPUT, M6811_TFLG2, M6811_PAIF, M6811_TMSK2, M6811_PAII }, { M6811_INT_AOVERFLOW,M6811_TFLG2, M6811_PAOVF, M6811_TMSK2, M6811_PAOVI}, #if 0 { M6811_INT_COPRESET, M6811_CONFIG, M6811_NOCOP, 0, 0 }, { M6811_INT_COPFAIL, M6811_CONFIG, M6811_NOCOP, 0, 0 } #endif }; #define TableSize(X) (sizeof X / sizeof(X[0])) #define CYCLES_MAX ((((signed64) 1) << 62) - 1) enum { OPTION_INTERRUPT_INFO = OPTION_START, OPTION_INTERRUPT_CATCH, OPTION_INTERRUPT_CLEAR }; static DECLARE_OPTION_HANDLER (interrupt_option_handler); static const OPTION interrupt_options[] = { { {"interrupt-info", no_argument, NULL, OPTION_INTERRUPT_INFO }, '\0', NULL, "Print information about interrupts", interrupt_option_handler }, { {"interrupt-catch", required_argument, NULL, OPTION_INTERRUPT_CATCH }, '\0', "NAME[,MODE]", "Catch interrupts when they are raised or taken\n" "NAME Name of the interrupt\n" "MODE Optional mode (`taken' or `raised')", interrupt_option_handler }, { {"interrupt-clear", required_argument, NULL, OPTION_INTERRUPT_CLEAR }, '\0', "NAME", "No longer catch the interrupt", interrupt_option_handler }, { {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL } }; /* Initialize the interrupts module. */ void interrupts_initialize (SIM_DESC sd, struct _sim_cpu *proc) { struct interrupts *interrupts = &proc->cpu_interrupts; interrupts->cpu = proc; sim_add_option_table (sd, 0, interrupt_options); } /* Initialize the interrupts of the processor. */ void interrupts_reset (struct interrupts *interrupts) { int i; interrupts->pending_mask = 0; if (interrupts->cpu->cpu_mode & M6811_SMOD) interrupts->vectors_addr = 0xbfc0; else interrupts->vectors_addr = 0xffc0; interrupts->nb_interrupts_raised = 0; interrupts->min_mask_cycles = CYCLES_MAX; interrupts->max_mask_cycles = 0; interrupts->last_mask_cycles = 0; interrupts->start_mask_cycle = -1; interrupts->xirq_start_mask_cycle = -1; interrupts->xirq_max_mask_cycles = 0; interrupts->xirq_min_mask_cycles = CYCLES_MAX; interrupts->xirq_last_mask_cycles = 0; for (i = 0; i < M6811_INT_NUMBER; i++) { interrupts->interrupt_order[i] = i; } /* Clear the interrupt history table. */ interrupts->history_index = 0; memset (interrupts->interrupts_history, 0, sizeof (interrupts->interrupts_history)); memset (interrupts->interrupts, 0, sizeof (interrupts->interrupts)); /* In bootstrap mode, initialize the vector table to point to the RAM location. */ if (interrupts->cpu->cpu_mode == M6811_SMOD) { bfd_vma addr = interrupts->vectors_addr; uint16 vector = 0x0100 - 3 * (M6811_INT_NUMBER - 1); for (i = 0; i < M6811_INT_NUMBER; i++) { memory_write16 (interrupts->cpu, addr, vector); addr += 2; vector += 3; } } } static int find_interrupt (const char *name) { int i; if (name) for (i = 0; i < M6811_INT_NUMBER; i++) if (strcasecmp (name, interrupt_names[i]) == 0) return i; return -1; } static SIM_RC interrupt_option_handler (SIM_DESC sd, sim_cpu *cpu, int opt, char *arg, int is_command) { char *p; int mode; int id; struct interrupts *interrupts; if (cpu == 0) cpu = STATE_CPU (sd, 0); interrupts = &cpu->cpu_interrupts; switch (opt) { case OPTION_INTERRUPT_INFO: for (id = 0; id < M6811_INT_NUMBER; id++) { sim_io_eprintf (sd, "%-10.10s ", interrupt_names[id]); switch (interrupts->interrupts[id].stop_mode) { case SIM_STOP_WHEN_RAISED: sim_io_eprintf (sd, "catch raised "); break; case SIM_STOP_WHEN_TAKEN: sim_io_eprintf (sd, "catch taken "); break; case SIM_STOP_WHEN_RAISED | SIM_STOP_WHEN_TAKEN: sim_io_eprintf (sd, "catch all "); break; default: sim_io_eprintf (sd, " "); break; } sim_io_eprintf (sd, "%ld\n", interrupts->interrupts[id].raised_count); } break; case OPTION_INTERRUPT_CATCH: p = strchr (arg, ','); if (p) *p++ = 0; mode = SIM_STOP_WHEN_RAISED; id = find_interrupt (arg); if (id < 0) sim_io_eprintf (sd, "Interrupt name not recognized: %s\n", arg); if (p && strcasecmp (p, "raised") == 0) mode = SIM_STOP_WHEN_RAISED; else if (p && strcasecmp (p, "taken") == 0) mode = SIM_STOP_WHEN_TAKEN; else if (p && strcasecmp (p, "all") == 0) mode = SIM_STOP_WHEN_RAISED | SIM_STOP_WHEN_TAKEN; else if (p) { sim_io_eprintf (sd, "Invalid argument: %s\n", p); break; } if (id >= 0) interrupts->interrupts[id].stop_mode = mode; break; case OPTION_INTERRUPT_CLEAR: mode = SIM_STOP_WHEN_RAISED; id = find_interrupt (arg); if (id < 0) sim_io_eprintf (sd, "Interrupt name not recognized: %s\n", arg); else interrupts->interrupts[id].stop_mode = 0; break; } return SIM_RC_OK; } /* Update the mask of pending interrupts. This operation must be called when the state of some 68HC11 IO register changes. It looks the different registers that indicate a pending interrupt (timer, SCI, SPI, ...) and records the interrupt if it's there and enabled. */ void interrupts_update_pending (struct interrupts *interrupts) { int i; uint8 *ioregs; unsigned long clear_mask; unsigned long set_mask; clear_mask = 0; set_mask = 0; ioregs = &interrupts->cpu->ios[0]; for (i = 0; i < TableSize(idefs); i++) { struct interrupt_def *idef = &idefs[i]; uint8 data; /* Look if the interrupt is enabled. */ if (idef->enable_paddr) { data = ioregs[idef->enable_paddr]; if (!(data & idef->enabled_mask)) { /* Disable it. */ clear_mask |= (1 << idef->int_number); continue; } } /* Interrupt is enabled, see if it's there. */ data = ioregs[idef->int_paddr]; if (!(data & idef->int_mask)) { /* Disable it. */ clear_mask |= (1 << idef->int_number); continue; } /* Ok, raise it. */ set_mask |= (1 << idef->int_number); } /* Some interrupts are shared (M6811_INT_SCI) so clear the interrupts before setting the new ones. */ interrupts->pending_mask &= ~clear_mask; interrupts->pending_mask |= set_mask; /* Keep track of when the interrupt is raised by the device. Also implements the breakpoint-on-interrupt. */ if (set_mask) { signed64 cycle = cpu_current_cycle (interrupts->cpu); int must_stop = 0; for (i = 0; i < M6811_INT_NUMBER; i++) { if (!(set_mask & (1 << i))) continue; interrupts->interrupts[i].cpu_cycle = cycle; if (interrupts->interrupts[i].stop_mode & SIM_STOP_WHEN_RAISED) { must_stop = 1; sim_io_printf (CPU_STATE (interrupts->cpu), "Interrupt %s raised\n", interrupt_names[i]); } } if (must_stop) sim_engine_halt (CPU_STATE (interrupts->cpu), interrupts->cpu, 0, cpu_get_pc (interrupts->cpu), sim_stopped, SIM_SIGTRAP); } } /* Finds the current active and non-masked interrupt. Returns the interrupt number (index in the vector table) or -1 if no interrupt can be serviced. */ int interrupts_get_current (struct interrupts *interrupts) { int i; if (interrupts->pending_mask == 0) return -1; /* SWI and illegal instructions are simulated by an interrupt. They are not maskable. */ if (interrupts->pending_mask & (1 << M6811_INT_SWI)) { interrupts->pending_mask &= ~(1 << M6811_INT_SWI); return M6811_INT_SWI; } if (interrupts->pending_mask & (1 << M6811_INT_ILLEGAL)) { interrupts->pending_mask &= ~(1 << M6811_INT_ILLEGAL); return M6811_INT_ILLEGAL; } /* If there is a non maskable interrupt, go for it (unless we are masked by the X-bit. */ if (interrupts->pending_mask & (1 << M6811_INT_XIRQ)) { if (cpu_get_ccr_X (interrupts->cpu) == 0) { interrupts->pending_mask &= ~(1 << M6811_INT_XIRQ); return M6811_INT_XIRQ; } return -1; } /* Interrupts are masked, do nothing. */ if (cpu_get_ccr_I (interrupts->cpu) == 1) { return -1; } /* Returns the first interrupt number which is pending. The interrupt priority is specified by the table `interrupt_order'. For these interrupts, the pending mask is cleared when the program performs some actions on the corresponding device. If the device is not reset, the interrupt remains and will be re-raised when we return from the interrupt (see 68HC11 pink book). */ for (i = 0; i < M6811_INT_NUMBER; i++) { enum M6811_INT int_number = interrupts->interrupt_order[i]; if (interrupts->pending_mask & (1 << int_number)) { return int_number; } } return -1; } /* Process the current interrupt if there is one. This operation must be called after each instruction to handle the interrupts. If interrupts are masked, it does nothing. */ int interrupts_process (struct interrupts *interrupts) { int id; uint8 ccr; /* See if interrupts are enabled/disabled and keep track of the number of cycles the interrupts are masked. Such information is then reported by the info command. */ ccr = cpu_get_ccr (interrupts->cpu); if (ccr & M6811_I_BIT) { if (interrupts->start_mask_cycle < 0) interrupts->start_mask_cycle = cpu_current_cycle (interrupts->cpu); } else if (interrupts->start_mask_cycle >= 0 && (ccr & M6811_I_BIT) == 0) { signed64 t = cpu_current_cycle (interrupts->cpu); t -= interrupts->start_mask_cycle; if (t < interrupts->min_mask_cycles) interrupts->min_mask_cycles = t; if (t > interrupts->max_mask_cycles) interrupts->max_mask_cycles = t; interrupts->start_mask_cycle = -1; interrupts->last_mask_cycles = t; } if (ccr & M6811_X_BIT) { if (interrupts->xirq_start_mask_cycle < 0) interrupts->xirq_start_mask_cycle = cpu_current_cycle (interrupts->cpu); } else if (interrupts->xirq_start_mask_cycle >= 0 && (ccr & M6811_X_BIT) == 0) { signed64 t = cpu_current_cycle (interrupts->cpu); t -= interrupts->xirq_start_mask_cycle; if (t < interrupts->xirq_min_mask_cycles) interrupts->xirq_min_mask_cycles = t; if (t > interrupts->xirq_max_mask_cycles) interrupts->xirq_max_mask_cycles = t; interrupts->xirq_start_mask_cycle = -1; interrupts->xirq_last_mask_cycles = t; } id = interrupts_get_current (interrupts); if (id >= 0) { uint16 addr; struct interrupt_history *h; /* Implement the breakpoint-on-interrupt. */ if (interrupts->interrupts[id].stop_mode & SIM_STOP_WHEN_TAKEN) { sim_io_printf (CPU_STATE (interrupts->cpu), "Interrupt %s will be handled\n", interrupt_names[id]); sim_engine_halt (CPU_STATE (interrupts->cpu), interrupts->cpu, 0, cpu_get_pc (interrupts->cpu), sim_stopped, SIM_SIGTRAP); } cpu_push_all (interrupts->cpu); addr = memory_read16 (interrupts->cpu, interrupts->vectors_addr + id * 2); cpu_call (interrupts->cpu, addr); /* Now, protect from nested interrupts. */ if (id == M6811_INT_XIRQ) { cpu_set_ccr_X (interrupts->cpu, 1); } else { cpu_set_ccr_I (interrupts->cpu, 1); } /* Update the interrupt history table. */ h = &interrupts->interrupts_history[interrupts->history_index]; h->type = id; h->taken_cycle = cpu_current_cycle (interrupts->cpu); h->raised_cycle = interrupts->interrupts[id].cpu_cycle; if (interrupts->history_index >= MAX_INT_HISTORY-1) interrupts->history_index = 0; else interrupts->history_index++; interrupts->nb_interrupts_raised++; cpu_add_cycles (interrupts->cpu, 14); return 1; } return 0; } void interrupts_raise (struct interrupts *interrupts, enum M6811_INT number) { interrupts->pending_mask |= (1 << number); interrupts->nb_interrupts_raised ++; } void interrupts_info (SIM_DESC sd, struct interrupts *interrupts) { signed64 t, prev_interrupt; int i; sim_io_printf (sd, "Interrupts Info:\n"); sim_io_printf (sd, " Interrupts raised: %lu\n", interrupts->nb_interrupts_raised); if (interrupts->start_mask_cycle >= 0) { t = cpu_current_cycle (interrupts->cpu); t -= interrupts->start_mask_cycle; if (t > interrupts->max_mask_cycles) interrupts->max_mask_cycles = t; sim_io_printf (sd, " Current interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); } t = interrupts->min_mask_cycles == CYCLES_MAX ? interrupts->max_mask_cycles : interrupts->min_mask_cycles; sim_io_printf (sd, " Shortest interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); t = interrupts->max_mask_cycles; sim_io_printf (sd, " Longest interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); t = interrupts->last_mask_cycles; sim_io_printf (sd, " Last interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); if (interrupts->xirq_start_mask_cycle >= 0) { t = cpu_current_cycle (interrupts->cpu); t -= interrupts->xirq_start_mask_cycle; if (t > interrupts->xirq_max_mask_cycles) interrupts->xirq_max_mask_cycles = t; sim_io_printf (sd, " XIRQ Current interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); } t = interrupts->xirq_min_mask_cycles == CYCLES_MAX ? interrupts->xirq_max_mask_cycles : interrupts->xirq_min_mask_cycles; sim_io_printf (sd, " XIRQ Min interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); t = interrupts->xirq_max_mask_cycles; sim_io_printf (sd, " XIRQ Max interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); t = interrupts->xirq_last_mask_cycles; sim_io_printf (sd, " XIRQ Last interrupts masked sequence: %s\n", cycle_to_string (interrupts->cpu, t, PRINT_TIME | PRINT_CYCLE)); if (interrupts->pending_mask) { sim_io_printf (sd, " Pending interrupts : "); for (i = 0; i < M6811_INT_NUMBER; i++) { enum M6811_INT int_number = interrupts->interrupt_order[i]; if (interrupts->pending_mask & (1 << int_number)) { sim_io_printf (sd, "%s ", interrupt_names[int_number]); } } sim_io_printf (sd, "\n"); } prev_interrupt = 0; sim_io_printf (sd, "N Interrupt Cycle Taken Latency" " Delta between interrupts\n"); for (i = 0; i < MAX_INT_HISTORY; i++) { int which; struct interrupt_history *h; signed64 dt; which = interrupts->history_index - i - 1; if (which < 0) which += MAX_INT_HISTORY; h = &interrupts->interrupts_history[which]; if (h->taken_cycle == 0) break; dt = h->taken_cycle - h->raised_cycle; sim_io_printf (sd, "%2d %-9.9s %15.15s ", i, interrupt_names[h->type], cycle_to_string (interrupts->cpu, h->taken_cycle, 0)); sim_io_printf (sd, "%15.15s", cycle_to_string (interrupts->cpu, dt, 0)); if (prev_interrupt) { dt = prev_interrupt - h->taken_cycle; sim_io_printf (sd, " %s", cycle_to_string (interrupts->cpu, dt, PRINT_TIME)); } sim_io_printf (sd, "\n"); prev_interrupt = h->taken_cycle; } }