2015-04-24 David Binderman Nick Clifton PR 18273 * exec.c (add32): Fix typo in check for overflow. 2015-04-19 Jiri Gaisler * erc32.c (current_target_byte_order): Delete. (fetch_bytes): Remove. (store_bytes): Remove byte twisting. (memory_read, memory_write): Access memory directly. (extract_short, extract_short_signed, extract_byte, extract_byte_signed): New function for for sub-word LD instructions. * exec.c (extract_short, extract_short_signed, extract_byte, extract_byte_signed): New functions. (dispatch_instruction): Update memory reads. * func.c (current_target_byte_order): Delete. (get_regi): Delete little endian handling. (disp_ctrl, dis_mem): Adjust print-out to new data endian. (bfd_load): Delete little endian handling. * interf.c (current_target_byte_order): Delete. (sim_open): Set dinfo to host endian to get correct disassembly. (sim_write, sim_read): Convert endian when gdb reads or writes memory. * sis.c (main): Set endian. * sis.h (EBT): Define. 2015-04-13 Mike Frysinger * configure: Regenerate. 2015-03-31 Mike Frysinger * config.in, configure: Regenerate. 2015-03-28 Jiri Gaisler * func.c (exec_cmd): Fix old style prototype. Mark cmd const. Save the command in a new cmdsave2 to avoid modifying. (bfd_load): Fix old style prototype. Mark fname const. * sis.h (exec_cmd): Mark cmd const. (bfd_load): Mark fname const. 2015-03-28 Jiri Gaisler * erc32.c (memory_iread): New function to fetch instructions. (memory_read): Print message in verbose mode. * interf.c (run_sim): Use memory_iread. * sis.c (run_sim): As above. * sis.h (memory_iread): New prototype. (sregs): Declare. 2015-03-28 Mike Frysinger * erc32.c (mec_read): Delete parenthesis around return statement. (mec_write, read_uart, rtc_counter_read, gpt_counter_read, memory_read, memory_write, get_mem_ptr, sis_memory_write, sis_memory_read): Likewise. * exec.c (sub_cc, add_cc, add32, dispatch_instruction, fpexec, chk_asi, execute_trap, check_interrupts): Likewise. * float.c (get_accex): Likewise. * func.c (batch, limcalc, exec_cmd, disp_fpu, now, wait_for_irq, check_bpt, bfd_load, get_time): Likewise. * interf.c (run_sim, sim_write, sim_read): Likewise. * sis.c (run_sim): Likewise. 2015-03-24 Mike Frysinger * interf.c (sim_set_callbacks, sim_size, sim_trace): Delete. 2015-03-17 Jiri Gaisler * func.c (exec_cmd): Silence compiler warnings when calling system(). (batch): Replace fgets() with getline(). 2015-03-17 Jiri Gaisler * func.c (show_stat): Print simulation time in portable long long format. * help.c (usage): Update usage help print-out. * sis.c (run_sim): Increase debug level with -v. Also print simulation time in portable long long format. * sis.h: Use stdint.h for portable 32- and 64-bit ints. 2015-03-16 Mike Frysinger * config.in, configure: Regenerate. 2015-03-16 Jiri Gaisler * Makefile.in (end, end.h): Remove target rules. (clean): Remove end and end.h. (erc32.o, exec.o, float.o, func.o, help.o, interf.o, sis.o): Delete rules. * configure, config.in: Regenerate. * configure.ac: Use SIM_AC_OPTION_HOSTENDIAN * end.c: Delete. * erc32.c: Remove end.h include. * exec.c: Remove end.h include. Use HOST_LITTLE_ENDIAN. * func.c, sis.c: Likewise. 2015-03-14 Mike Frysinger * Makefile.in (SIM_RUN_OBJS): Set to sis.o. 2015-03-14 Mike Frysinger * configure.ac (AC_CHECK_HEADERS): Delete. * aclocal.m4, configure: Regenerate. 2015-02-22 Jiri Gaisler * Makefile.in: Add include path to readline.h. sis.c: Remove locally define readline types. 2015-02-21 Jiri Gaisler * func.c (reset_stat, show_stat): Switch to double in time keeping. (get_time): New function to get system time. * interf.c (run_sim): Use get_time() for system time. * sis.c (run_sim): Likewise. * sis.h: Likewise. 2015-02-21 Jiri Gaisler * Makefile.in: Remove unused defines 2015-02-21 Jiri Gaisler * float.c (get_accex, clear_accex, set_fsr): Use functions from fenv.h instead of custom assembly. 2015-02-21 Jiri Gaisler * erc32.c (mec_read): Allow simulator memory size to be read by application. (boot_init): initialize memory and timers if start address is not 0. * func.c (exe_cmd): Call boot_init if start address not 0. * interf.c (run_sim): Likewise. 2015-02-21 Jiri Gaisler * exec.c (init_regs): erc32 has vendor ID 1 and version ID 1 in %psr. 2015-02-21 Jiri Gaisler * func.c (print_insn_sparc_sis): Add helper function for disassembly. (disp_ctrl): Use helper function. 2014-08-19 Alan Modra * configure: Regenerate. 2014-08-15 Roland McGrath * configure: Regenerate. * config.in: Regenerate. 2014-03-10 Mike Frysinger * interf.c (sim_do_command): Add const to cmd. 2014-03-05 Mike Frysinger * interf.c (sim_load): Add const to prog. 2013-10-09 Sergio Durigan Junior PR sim/16018: * float.c (set_fsr): Add missing "break" statements. Reindent code. 2013-09-23 Alan Modra * configure: Regenerate. 2013-06-03 Mike Frysinger * aclocal.m4, configure: Regenerate. 2013-03-14 Joel Sherrill * Makefile.in: Include build directory in search path to find config.h 2012-08-16 Nick Clifton * end.c: Include config.h before system header files. * erc32.c: Likewise. * exec.c: Likewise. * float.c: Likewise. * func.c: Likewise. * help.c: Likewise. * interf.c: Likewise. 2012-06-15 Joel Brobecker * sys.h: Include "config.h". 2012-06-15 Joel Brobecker * config.in, configure: Regenerate. 2012-05-24 Pedro Alves PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. 2012-03-24 Mike Frysinger * aclocal.m4, config.in, configure: Regenerate. 2011-12-31 Mike Frysinger PR sim/9971: * configure.ac: Change AC_CHECK_LIB to AC_SEARCH_LIBS to match the code in gdb's configure.ac with $TERMCAP. * configure: Regenerated. 2011-12-03 Mike Frysinger * aclocal.m4: New file. * configure: Regenerate. 2011-10-17 Mike Frysinger * configure.ac: Change include to common/acinclude.m4. 2011-10-17 Mike Frysinger * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER call. Replace common.m4 include with SIM_AC_COMMON. * configure: Regenerate. 2011-06-09 Mike Frysinger * interf.c (sim_open): Accept and ignore `--sysroot=...'. 2011-06-01 Joel Brobecker * interf.c (sim_complete_command): New stub function. 2011-01-11 Andrew Burgess * interf.c (sim_store_register): Update return value to match new API. 2010-05-20 Joel Brobecker * sis.h: Remove #include . (uint64, int64): Redefine without using stdint.h. (UINT64_MAX): Define. 2010-04-20 Tiemen Schut * erc32.c (sis_memory_write): Change prototype to const unsigned char *. * func.c (exec_cmd, event, advance_time, wait_for_irq): Use uint64 for counts. * interf.c (run_sim): Change icount to uint64_t. Use strtol directly. (sim_resume): Specify maximum run time as uint64. * sis.c (run_sim): Change icount to uint64_t. * sis.h: Define uint64 as uint64_t. Change various fields and prototypes to uint64 to support longer simulations. 2010-04-14 Mike Frysinger * interp.c (sim_write): Add const to buf arg. 2010-01-09 Ralf Wildenhues * configure: Regenerate. 2009-08-22 Ralf Wildenhues * config.in: Regenerate. * configure: Likewise. * configure: Regenerate. 2008-11-10 Joel Sherrill * erc32.c, exec.c: Fix warnings. 2008-07-11 Hans-Peter Nilsson * configure: Regenerate to track ../common/common.m4 changes. * config.in: Ditto. 2008-06-09 Joel Sherrill * sis.c: Correct spelling error. 2008-06-06 Vladimir Prus Daniel Jacobowitz Joseph Myers * configure: Regenerate. 2006-12-21 Hans-Peter Nilsson * acconfig.h: Remove. * config.in: Regenerate. 2006-12-20 Hans-Peter Nilsson * configure.ac: Add test for readline, substitute READLINE. * Makefile.in (READLINE_LIB): New substituted-contents variable. (SIM_EXTRA_LIBDEPS): Don't set. (SIM_EXTRA_LIBS): Use $(READLINE_LIB) instead of ../../readline/libreadline.a. * configure: Regenerate. 2006-08-08 Daniel Jacobowitz * Makefile.in (func.o, help.o): Correct dependencies. 2006-08-08 Joel Sherrill * Makefile.in (install-sis): Honor DESTDIR. 2006-06-13 Richard Earnshaw * configure: Regenerated. 2006-06-05 Daniel Jacobowitz * configure: Regenerated. 2006-05-31 Daniel Jacobowitz * configure: Regenerated. 2005-11-28 Mark Mitchell * interf.c: (gdb/signals.h): Include it. (sim_stop_reason): Use TARGET_SIGNAL_*. 2005-07-08 Ben Elliston * func.c: Remove ANSI_PROTOTYPES conditional code. 2005-03-23 Mark Kettenis * configure: Regenerate. 2005-03-07 Jerome Guitton * sim/erc32/float.c (set_fsr): Do not use deprecated multi-line strings. (clear_accex): Ditto. * sim/erc32/interf.c: Remove the redeclaration of fprintf. * sim/erc32/sis.c: Ditto. * sim/erc32/exec.c: Add missing semicolon. * sim/erc32/func.c: Remove definitions of generic_print_address, generic_symbol_at_address, buffer_read_memory and perror_memory, as they are already defined in opcodes/dis-buf.c. 2005-01-14 Andrew Cagney * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. 2005-01-12 Andrew Cagney * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. 2005-01-11 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. 2004-12-08 Hans-Peter Nilsson * configure: Regenerate for ../common/aclocal.m4 update. 2004-11-11 Andreas Schwab * interf.c: Include "libiberty.h" instead of declaring buildargv ourselves. 2003-02-27 Andrew Cagney * interf.c (sim_open, sim_create_inferior): Rename _bfd to bfd. 2002-06-16 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. 2002-06-08 Andrew Cagney * sis.h: Include "gdb/remote-sim.h" and "gdb/callback.h". * interf.c: Include "gdb/remote-sim.h". Tue May 23 21:39:23 2000 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. 2000-03-07 Frank Ch. Eigler From John Dallaway : * Makefile.in (install-sis): Add $(EXEEXT) for Windows host. 2000-03-03 Jonathan Larmour * func.c (buffer_read_memory): Change type of size to unsigned to match prototype Thu Sep 2 18:15:53 1999 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. 1999-05-08 Felix Lee * configure: Regenerated to track ../common/aclocal.m4 changes. 1999-03-03 DJ Delorie * configure.in: add termcap and -luser32 for host=cygwin * configure: regenerate 1999-02-11 Hugo Tyson * exec.c (dispatch_instruction): Correct the sense of the if (!sparclite) { sregs->trap = TRAP_UNIMP; break; } clause that has been pasted around: it's correct in the SCAN and DIVScc (divide step) cases (where it was probably originally written?), but reversed in the SDIV, SDIVcc, UDIV, UDIVcc cases ie. instructions only in the SPARC V8 or SPARClite 86x architectures. It was also present when not required for SMUL, SMULcc, UMUL, UMULcc instructions that are present in all architectures. 1999-01-25 Hugo Tyson * interf.c (run_sim): Fix a bug in the main loop's handling of annulled delay slot instructions. There is precedent for this change; the _other_ main loop in sis.c gets it right according to my reading of the code. The bug is: if an interrupt happens when the next instruction (at sregs->pc) is annulled, the trap is taken (by execute_trap()) with the current values of PC and NPC, so when the trap returns, the annulled instruction is indeed executed. Another giveaway is that the annul flag is cleared in execute_trap(): the information is demonstrably discarded. The solution is: perform annulling before looking for traps, in fact it's neater to do annulling, see if there's an interrupt and if not, do the instruction, then handle traps be they generated by interrupts pending or by the instruction we might just have done. That's what the sis.c one does. 1999-01-20 Hugo Tyson * sis.h: Add asr17 register for support of SparcLITE (at least the Hitachi ones I find before me) * exec.c (dispatch_instruction): Case WRY: Allow write of asr17 if sparclite. Other ASR numbers than 17 or 0 (Y) trap out. Case RDY: Allow read of asr17 if sparclite. Other ASRs ditto. (execute_trap): Do single-vector-trapping if asr17 bit 0 is set. (init_regs): Initialize y and asr17. NB: In instruction-set space, the Y register is asr0; the instructions have different names for human reasons only. * sis.c: * interf.c: Set boolean mode variable dumbio if invoked with argument "-dumbio" and mention it of verbose. * erc32.c: if "dumbio" is set, do not assume that there is a terminal type device attached to stdin/stdout. Do not set buffering or mess with tcsetattr or do any read operations in order to make UART interrupts; not input data is supported. This is necessary to allow the sim to be used within the eCos testing infrastructure where stdin/stdout are pipes to a TCL program; the sim hangs otherwise. Thu Jul 23 07:17:03 1998 Mark Alexander * exec.c (dispatch_instruction): Add SPARClite 'scan' instruction. Tue Jul 7 21:12:41 1998 Mark Alexander * func.c (bfd_load): Add special handling of a.out executables. Sat Jun 13 08:33:25 1998 Mark Alexander * func.c (bfd_load): Print correct endianness. * interf.c (run_sim): Print debugging information if verbosity level is greater than 2. (sim_open): Repeated -v options now increment verbosity level. (sim_store_register): Handle little-endian case. (flush_window): Print debugging information if verbosity level is greater then 2. Tue Jun 2 15:20:35 1998 Mark Alexander * interf.c (sim_open): Use revamped memory_read, which makes byte-swapping unnecessary. Add -sparclite-board option for emulating RAM found on typical SPARClite boards. Print error message for unrecognized option. * erc32.c: Change RAM address and size from constants to variables, to allow emulation of SPARClite board RAM. (fetch_bytes, store_bytes): New helper functions for revamped mememory_read and memory_write. (memory_read, memory_write): Rewrite to store bytes in target byte order instead of storing words in host byte order; this greatly simplifies support of little-endian programs. (get_mem_ptr): Remove unnecessary byte parameter. (sis_memory_write, sis_memory_read): Store words in target byte order instead of host byte order. (byte_swap_words): Remove, no longer needed. * sis.h ((byte_swap_words): Remove declaration, no longer needed. (memory_read): Add new sz parameter. * sis.c (run_sim): Use revamped memory_read, which makes byte-swapping unnecessary. * exec.c (dispatch_instruction): Use revamped memory_read, which makes byte-swapping and double-word fetching unnecessary. * func.c (sparclite_board): Declare new variable. (get_regi): Handle little-endian data. (bfd_load): Recognize little-endian SPARClite as having little-endian data. Fri May 22 14:23:16 1998 Mark Alexander * erc32.c (port_init): Print messages only if sis_verbose is true. * func.c (bfd_load): Ditto. * interf.c (sim_open): Ditto. Thu May 14 23:10:48 1998 Mark Alexander * sis.h (uint64, int64): Define. * exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes. * (mul64): Simplify calculation of negative result. * (div64): New helper function for 64-bit division. * (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV, and UDIVCC. Wed May 13 14:59:54 1998 Mark Alexander * erc32.c (close_port): Don't close stdin; it kills GDB. (byte_swap_words): New function. * sis.h: (byte_swap_words): Declare. * interf.c (run_sim): Always fetch instructions as big-endian. * sis.c (run_sim): Ditto. Tue Apr 28 18:33:31 1998 Geoffrey Noer * configure: Regenerated to track ../common/aclocal.m4 changes. Sun Apr 26 15:31:55 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Sun Apr 26 15:20:17 1998 Tom Tromey * acconfig.h: New file. * configure.in: Reverted change of Apr 24; use sinclude again. Fri Apr 24 14:16:40 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Fri Apr 24 11:19:52 1998 Tom Tromey * configure.in: Don't call sinclude. Sat Apr 18 12:00:16 1998 Mark Alexander * func.c (disp_fpu): Fix build problem on big-endian hosts. Wed Apr 8 19:33:34 1998 Mark Alexander * erc32.c (sim_stop): Handle SIGINT gracefully. * interf.c (sim_open): Don't catch SIGINT; GDB will do that for us. Wed Apr 8 18:29:40 1998 Mark Alexander * exec.c (dispatch_instruction): Change how carry out is calculated in DIVSCC. Add emulation of SMULCC, UMUL, and UMULCC. Sat Apr 4 20:36:25 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Apr 1 21:19:18 1998 Mark Alexander * end.c: Update to version 2.7.5, fix compiler warnings and bugs. * erc32.c: Ditto. * exec.c: Ditto. * float.c: Ditto. * func.c: Ditto. * help.c: Ditto. * interf.c: Ditto. * sis.c: Ditto. * sis.h: Ditto. Fri Mar 27 16:15:52 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Mar 25 12:35:29 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Mar 18 12:38:12 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Feb 17 12:41:11 1998 Andrew Cagney * interf.c (sim_store_register, sim_fetch_register): Pass in length parameter. Return -1. Sun Feb 1 16:47:51 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Sat Jan 31 18:15:41 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Jan 19 22:26:29 1998 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Dec 15 23:17:11 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Thu Dec 4 09:21:05 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Oct 3 09:28:00 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Sep 24 17:38:57 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Sep 23 11:04:38 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Sep 22 11:46:20 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Sep 19 17:45:25 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Sep 15 17:36:15 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Aug 27 18:13:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Tue Aug 26 10:38:20 1997 Andrew Cagney * float.c (__setfpucw): Compile on any i386 target. Not just NT. * interf.c (sim_kill): Delete. (sim_create_inferior): Add ABFD argument. Initialize PC from ABFD argument. (sim_load): Don't save start address. (start_address): Delete variable. Mon Aug 25 17:50:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Mon Aug 25 16:19:49 1997 Andrew Cagney * interf.c (sim_open): Add ABFD argument. Change ARGV to PARGV. Mon Jun 30 11:45:25 1997 Doug Evans * Makefile.in (install-sis): Change $(srcdir)/sis to sis. Wed May 28 09:46:13 1997 Andrew Cagney * interf.c (sim_set_callbacks): Drop SD argument - not applicable. (sim_open): Add callback arg, save it. Thu Apr 24 00:39:51 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Apr 22 11:05:01 1997 Doug Evans * interf.c (sim_open): Undo patch to add -E support. Thu Apr 17 03:03:56 1997 Doug Evans * interf.c (sim_open): Ignore -E arg. (start_address): New static local. (sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd. (sim_create_inferior): Return SIM_RC. Delete arg start_address. Tue Apr 15 15:16:11 1997 Ian Lance Taylor * Makefile.in (install-sis): Depend upon installdirs. Use $(program_transform_name) directly, rather than using $(INSTALL_XFORM). Mon Apr 7 15:45:02 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Wed Apr 2 15:06:28 1997 Doug Evans * interf.c (sim_open): New arg `kind'. * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Apr 2 14:34:19 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Mar 17 15:10:07 1997 Andrew Cagney * configure: Re-generate. Thu Mar 13 12:46:04 1997 Doug Evans * interf.c (sim_open): New SIM_DESC result. Argument is now in argv form. (other sim_*): New SIM_DESC argument. Tue Feb 4 13:35:20 1997 Doug Evans * Makefile.in (@COMMON_MAKEFILE_FRAG): Use COMMON_{PRE,POST}_CONFIG_FRAG instead. * configure.in: sinclude ../common/aclocal.m4. * configure: Regenerated. Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) * configure configure.in Makefile.in: Update to new configure scheme which is more compatible with WinGDB builds. * configure.in: Improve comment on how to run autoconf. * configure: Re-run autoconf to get new ../common/aclocal.m4. * Makefile.in: Use autoconf substitution to install common makefile fragment. Wed Dec 4 18:25:04 1996 Rob Savoye * interf.c (run_sim): Stop the simulator and reset the stdio after breakpoints. Tue Dec 3 11:54:37 1996 Rob Savoye * configure.in: Look for libtermcap.a. * Makefile.in: Only link in -ltermcap if it exists. * erc32.c: Update to version 2.6a. Fix uart handling. * exec.c: Update to version 2.6a. Add sparclite support. * float.c: Update to version 2.6a. Convert comments to preprocessor warnings. Add __setfpucw() for i385 hosts so floating point exceptions work on win32. * func.c: Update to version 2.6a. Fix uart handling, add support for user error traps. * help.c: Update to version 2.6a. Add help note on user error traps. * interf.c: Update to version 2.6a. Fix uart handling, and add sparclite support. * examples/gccx: Use sparclite cross compiler, not native gcc. * examples/srt0.S: Use "mov" rather than "wr" for manipulating the psr register. Mon Nov 25 08:28:10 1996 Fred Fish * Makefile.in (run.o): Remove this rule, it hides the one in ../common/Make-common.in that correctly references the source in the sibling ../common directory. Wed Nov 20 01:30:12 1996 Doug Evans * Makefile.in: Delete stuff moved to ../common/Make-common.in. (SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define. (SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define. * configure.in: Simplify using macros in ../common/aclocal.m4. Call AC_CHECK_HEADERS(stdlib.h). * configure: Regenerated. * config.in: New file. * func.c (sim_set_callbacks): Delete, moved to * interf.c (sim_set_callbacks): here. (sim_callback): New global. Rewrite all calls to printf_filtered to go through callback. (sim_size,sim_trace): New functions. (sim_{insert,remove}_breakpoint): #if 0 out. * sis.c: #include "config.h". #include if present. (main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype. * sis.h: #include "callback.h". * run.c: Deleted, using one in ../common now. Thu Oct 3 16:12:03 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (clean): Move config.log to distclean. Wed Oct 2 16:57:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (clean): Also remove config.log. Sat Sep 14 00:00:46 1996 Ian Lance Taylor * Makefile.in (CC_FOR_BUILD): New variable. (AR, AR_FLAGS, BISON, MAKEINFO): Remove duplicate variables. (RANLIB, CC): Likewise. (end): Use $(CC_FOR_BUILD), not $(CC). * configure.in: Set CC_FOR_BUILD. * configure: Rebuild. Sun Sep 8 14:04:37 1996 Stu Grossman (grossman@critters.cygnus.com) * erc32.c (port_init): Disable this for __GO32__ (got no pty's there either...). Mon Aug 12 17:04:58 1996 Stu Grossman (grossman@critters.cygnus.com) * erc32.c: Don't include sys/ioctl.h or sys/file.h. They aren't necessary. * (port_init): Don't even *try* to open pty's under _WIN32. * Use SIM_ADDR, not caddr_t for declaring vars that hold addresses. * float.c: Get rid of #warning. Makes Microsoft C barf. * interf.c (sim_open): Cast fprintf to (fprintf_ftype) to fix compiler warning. * (sim_load sim_create_inferior sim_read): Use prototypes only in decls, not defs. * Get rid of enum sim_stop. It's defined in remote-sim.h. * (sim_stop_reason): Define SIGTRAP if _WIN32. * sis.h: Include ansidecl.h and remote-sim.h. Wed Jul 3 16:05:23 1996 Stu Grossman (grossman@critters.cygnus.com) * erc32.c (mec_reset mec_read mec_write memory_read memory_write), sis.h: Get rid of all uses of long long's. * (close_port read_uart write_uart uarta_tx): Don't seg fault when can't open pty's. * exec.c: Add two new instructions: smul, and divscc. * interf.c (flush_windows): New routine to flush the register windows out to the stack just before returning to GDB. Makes backtraces work much better. Wed Jun 26 12:19:11 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. (docdir, oldincludedir): Removed. * configure.in (AC_PREREQ): autoconf 2.5 or higher. (AC_PROG_INSTALL): Added. * configure: Rebuilt. Mon Jun 24 14:19:07 1996 Ian Lance Taylor * configure.in: Call AC_PROG_CC before running configure.host. * configure: Rebuild with autoconf 2.10. Tue Jun 4 10:37:12 1996 Tom Tromey * Makefile.in (install): Don't check to see if tooldir exists. Make $(tooldir) and $(tooldir)/bin. Mon Jun 3 12:33:38 1996 Ian Lance Taylor * Makefile.in (end.h): Use explicit ./ when running end. Sun May 19 21:05:31 1996 Rob Savoye * func.c(bfd_load): Don't try to print the filename if the pfbd is NULL. * interf.c(sim_load): Pass the whole string, not just the first byte. Version 2.1 26-02-96 -------------------- * Fixed bug in "go" command. version 2.0 05-02-96 -------------------- * Fixed bug in interrupt force register (erc32.c). * Change file load function to use bfd_openr. * SIS should now be endian independent. version 1.8 24-11-95 -------------------- * Fixed FPU timing - some sequences of FPU instructions did not calculate the resource dependencies right. * Corrected STDFQ when qne = 0 (again!). The ftt is set to sequence_error but no FPU trap is generated. version 1.7.1 31-10-95 -------------------- * Corrected STDFQ when qne = 0. Now, a trap is immidiately generated but the FPU stays in execute mode. * Corrected JMPL and RETT timing (these instructions takes two cycles). version 1.7 25-10-95 -------------------- * Interrupt during annuled instruction corrupted return address - fixed. version 1.6.2 25-10-95 -------------------- * Added -DFAST_UART to Makefile version 1.6.1 24-10-95 -------------------- * Fixed bug in STDFQ which caused bus error version 1.6 02-10-95 -------------------- * Modified srt0.s to include code that initiates registers in IU and FPU and initializes the data segment. The simulator 'load' command does not longer initialize the data segment! * Corrected MEC timer operation; scalers now divide the frequency by (scaler_value + 1). * MEC breakpoints are not checked during store operation version 1.5 14-09-95 -------------------- * Fixed some bugs in the cycle counting for IU & FPU instructions. * Fixed bug that allowed an annuled instruction to cause memory exception. * The *ws parameter in mem.c should now contain the number of waitstates required by the memory access (was total number of cycles). * The supplied srt0.s now clears the BSS (thanks Joel). version 1.4 22-08-95 -------------------- * Added a '-g' switch to enable/disable the GNU readline(), which cause some problems on solaris 2.x machines. * Enabled MEC watchpoint and breakpoint function to mem.c. Performance may suffer a bit ... NOTE: The UARTs are now connected to /dev/ttypc and /dev/ttypd. version 1.3 26-07-95 -------------------- * Fixed bug in mulscc instruction (how could that ever have worked?) * Fixed bug in UART B (flushed characters on UART A), thanks Paul. version 1.2 13-07-95 -------------------- * Fixed bug in interrupt handling (wrong interrupt selected when more that one interrupt pending) * Fixed updating of condition codes during logical instructions (carry and overflow were not reset) * Fixed bug in WRTBR (tt field was wrongly over-written) version 1.1 07-07-95 -------------------- * Fixed several bugs in the interrupt handler and callback routines. (reported by Paul Warren, Alsys)