2005-01-27 Andrew Cagney * configure: Regenerate to track ../gettext.m4 change. 2005-01-25 Alexandre Oliva 2004-11-10 Alexandre Oliva * frv-asm.c: Rebuilt. * frv-desc.c: Rebuilt. * frv-desc.h: Rebuilt. * frv-dis.c: Rebuilt. * frv-ibld.c: Rebuilt. * frv-opc.c: Rebuilt. * frv-opc.h: Rebuilt. 2005-01-24 Andrew Cagney * configure: Regenerate, ../gettext.m4 was updated. 2005-01-21 Fred Fish * mips-opc.c: Change INSN_ALIAS to INSN2_ALIAS. Change INSN_WRITE_MDMX_ACC to INSN2_WRITE_MDMX_ACC. Change INSN_READ_MDMX_ACC to INSN2_READ_MDMX_ACC. * mips-dis.c: Ditto. 2005-01-20 Alan Modra * ppc-opc.c (powerpc_opcodes): Add optional 'l' arg to tlbiel. 2005-01-19 Fred Fish * mips-dis.c (no_aliases): New disassembly option flag. (set_default_mips_dis_options): Init no_aliases to zero. (parse_mips_dis_option): Handle no-aliases option. (print_insn_mips): Ignore table entries that are aliases if no_aliases is set. (print_insn_mips16): Ditto. * mips-opc.c (mips_builtin_opcodes): Add initializer column for new pinfo2 member and add INSN_ALIAS initializers as needed. Also move WR_MACC and RD_MACC initializers from pinfo to pinfo2. * mips16-opc.c (mips16_opcodes): Ditto. 2005-01-17 Andrew Stubbs * sh-opc.h (arch_sh2a_or_sh3e,arch_sh2a_or_sh4): Correct definition. (inheritance diagram): Add missing edge. (arch_sh1_up): Rename arch_sh_up to match external name to make life easier for the testsuite. (arch_sh4_nofp_up): Likewise, rename arch_sh4_nofpu_up. (arch_sh4a_nofp_up): Likewise, rename arch_sh4a_nofpu_up. (arch_sh2a_nofpu_or_sh4_nommu_nofpu_up): Add missing arch_sh2a_or_sh4_up child. (sh_table): Do renaming as above. Correct comment for ldc.l for gas testsuite to read. Remove rogue mul.l from sh1 (duplicate of the one for sh2). Correct comments for movy.w and movy.l for gas testsuite to read. Correct comments for fmov.d and fmov.s for gas testsuite to read. 2005-01-12 H.J. Lu * i386-dis.c (OP_E): Don't ignore scale in SIB for 64 bit mode. 2005-01-12 H.J. Lu * i386-dis.c (OP_E): Ignore scale when index == 0x4 in SIB. 2005-01-10 Andreas Schwab * disassemble.c (disassemble_init_for_target) : Set skip_zeroes to 16. : Set skip_zeroes to 32. 2004-12-23 Tomer Levi * crx-opc.c: Mark 'bcop' instruction as RELAXABLE. 2004-12-14 Svein E. Seldal * avr-dis.c: Prettyprint. Added printing of symbol names in all memory references. Convert avr_operand() to C90 formatting. 2004-12-05 Tomer Levi * crx-dis.c (print_arg): Use 'info->print_address_func' for address printing. 2004-11-29 Tomer Levi * crx-opc.c (crx_optab): Mark all rbase_disps* operands as signed. (no_op_insn): Initialize array with instructions that have no operands. * crx-dis.c (make_instruction): Get rid of COP_BRANCH_INS operand swapping. 2004-11-29 Richard Earnshaw * arm-dis.c: Correct top-level comment. 2004-11-27 Richard Earnshaw * arm-opc.h (arm_opcode, thumb_opcode): Add extra field for the architecuture defining the insn. (arm_opcodes, thumb_opcodes): Delete. Move to ... * arm-dis.c (arm_opcodes, thumb_opcodes): Here. Add architecutre field. Also include opcode/arm.h. * Makefile.am (arm-dis.lo): Update dependency list. * Makefile.in: Regenerate. 2004-11-22 Ravi Ramaseshan * opcode/arc-opc.c (insert_base): Modify ls_operand[LS_OFFSET] to reflect the change to the short immediate syntax. 2004-11-19 Alan Modra * or32-opc.c (debug): Warning fix. * po/POTFILES.in: Regenerate. * maxq-dis.c: Formatting. (print_insn): Warning fix. 2004-11-17 Daniel Jacobowitz * arm-dis.c (WORD_ADDRESS): Define. (print_insn): Use it. Correct big-endian end-of-section handling. 2004-11-08 Inderpreet Singh Vineet Sharma * maxq-dis.c: New file. * disassemble.c (ARCH_maxq): Define. (disassembler): Add 'print_insn_maxq_little' for handling maxq instructions.. * configure.in: Add case for bfd_maxq_arch. * configure: Regenerate. * Makefile.am: Add support for maxq-dis.c * Makefile.in: Regenerate. * aclocal.m4: Regenerate. 2004-11-05 Tomer Levi * crx-opc.c (crx_optab): Rename 'arg_icr' to 'arg_idxr' for Index register mode. * crx-dis.c: Likewise. 2004-11-04 Hans-Peter Nilsson Generally, handle CRISv32. * cris-dis.c (TRACE_CASE): Define as (disdata->trace_case). (struct cris_disasm_data): New type. (format_reg, format_hex, cris_constraint, print_flags) (get_opcode_entry): Add struct cris_disasm_data * parameter. All callers changed. (format_sup_reg, print_insn_crisv32_with_register_prefix) (print_insn_crisv32_without_register_prefix) (print_insn_crisv10_v32_with_register_prefix) (print_insn_crisv10_v32_without_register_prefix) (cris_parse_disassembler_options): New functions. (bytes_to_skip, cris_spec_reg): Add enum cris_disass_family parameter. All callers changed. (get_opcode_entry): Call malloc, not xmalloc. Return NULL on failure. (cris_constraint) : New cases. (bytes_to_skip): Handle 'Y' and 'N' as 's'. Skip size is 4 bytes for constraint 'n'. (print_with_operands) : New case. (print_with_operands) : New cases. (print_insn_cris_generic): Emit "bcc ." for zero and CRISv32. (print_insn_cris_with_register_prefix) (print_insn_cris_without_register_prefix): Call cris_parse_disassembler_options. * cris-opc.c (cris_spec_regs): Mention that this table isn't used for CRISv32 and the size of immediate operands. New v32-only entries for bz, pid, srs, wz, exs, eda, dz, ebp, erp, nrp, ccs and spc. Add v32-only 4-byte entries for p2, p3, p5 and p6. Change ccr, ibr, irp to be v0..v10. Change bar, dccr to be v8..v10. Change brp to be v3..v10. (cris_support_regs): New vector. (cris_opcodes): Update head comment. New format characters '[', ']', space, 'A', 'd', 'N', 'n', 'Q', 'T', 'u', 'U', 'Y'. Add new opcodes for v32 and adjust existing opcodes to accommodate differences to earlier variants. (cris_cond15s): New vector. 2004-11-04 Jan Beulich * i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define. (indirEb): Remove. (Mp): Use f_mode rather than none at all. (t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode replaces what previously was x_mode; x_mode now means 128-bit SSE operands. (dis386): Make far jumps and calls have an 'l' prefix only in AT&T mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq. pinsrw's second operand is Edqw. (grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt, fldenv, frstor, fsave, fstenv all should also have suffixes in Intel mode when an operand size override is present or always suffixing. More instructions will need to be added to this group. (putop): Handle new macro chars 'C' (short/long suffix selector), 'I' (Intel mode override for following macro char), and 'J' (for adding the 'l' prefix to far branches in AT&T mode). When an alternative was specified in the template, honor macro character when specified for Intel mode. (OP_E): Handle new *_mode values. Correct pointer specifications for memory operands. Consolidate output of index register. (OP_G): Handle new *_mode values. (OP_I): Handle const_1_mode. (OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate respective opcode prefix bits have been consumed. (OP_EM, OP_EX): Provide some default handling for generating pointer specifications. 2004-10-28 Tomer Levi * crx-opc.c (REV_COP_INST): New macro, reverse operand order of COP_INST macro. 2004-10-27 Tomer Levi * crx-dis.c (enum REG_ARG_TYPE): New, replacing COP_ARG_TYPE. (getregliststring): Support HI/LO and user registers. * crx-opc.c (crx_instruction): Update data structure according to the rearrangement done in CRX opcode header file. (crx_regtab): Likewise. (crx_optab): Likewise. (crx_instruction): Reorder load/stor instructions, remove unsupported formats. support new Co-Processor instruction 'cpi'. 2004-10-27 Nick Clifton * opcodes/iq2000-asm.c: Regenerate. * opcodes/iq2000-desc.c: Regenerate. * opcodes/iq2000-desc.h: Regenerate. * opcodes/iq2000-dis.c: Regenerate. * opcodes/iq2000-ibld.c: Regenerate. * opcodes/iq2000-opc.c: Regenerate. * opcodes/iq2000-opc.h: Regenerate. 2004-10-21 Tomer Levi * crx-opc.c (crx_instruction): Replace i3, i4, i5 with us3, us4, us5 (respectively). Remove unsupported 'popa' instruction. Reverse operands order in store co-processor instructions. 2004-10-15 Alan Modra * Makefile.am: Run "make dep-am" * Makefile.in: Regenerate. 2004-10-12 Bob Wilson * xtensa-dis.c: Use ISO C90 formatting. 2004-10-09 Alan Modra * ppc-opc.c: Revert 2004-09-09 change. 2004-10-07 Bob Wilson * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc. 2004-10-07 David Gibson * ppc-opc.c: Replace literal "0"s with NULLs in pointer initializers. 2004-10-07 Tomer Levi * crx-opc.c (crx_instruction): Support Co-processor insns. * crx-dis.c (COP_ARG_TYPE): New enum for CO-Processor arguments. (getregliststring): Change function to use the above enum. (print_arg): Handle CO-Processor insns. (crx_cinvs): Add 'b' option to invalidate the branch-target cache. 2004-10-06 Aldy Hernandez * ppc-opc.c (powerpc_opcodes): Add efscfd, efdabs, efdnabs, efdneg, efdadd, efdsub, efdmul, efddiv, efdcmpgt, efdcmplt, efdcmpeq, efdtstgt, efdtstlt, efdtsteq, efdcfsi, efdcfsid, efdcfui, efdcfuid, efdcfsf, efdcfuf, efdctsi, efdctsidz, efdctsiz, efdctui, efdctuidz, efdctuiz, efdctsf, efdctuf, efdctuf, efdcfs. 2004-10-01 Bill Farmer * pdp11-dis.c (print_insn_pdp11): Subtract the SOB's displacement rather than add it. 2004-09-30 Paul Brook * arm-dis.c (print_insn_arm): Handle 'e' for SMI instruction. * arm-opc.h: Document %e. Add ARMv6ZK instructions. 2004-09-17 H.J. Lu * Makefile.am (AUTOMAKE_OPTIONS): Require 1.9. (CONFIG_STATUS_DEPENDENCIES): New. (Makefile): Removed. (config.status): Likewise. * Makefile.in: Regenerated. 2004-09-17 Alan Modra * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. * po/opcodes.pot: Regenerate. 2004-09-11 Andreas Schwab * configure: Rebuild. 2004-09-09 Segher Boessenkool * ppc-opc.c (L): Make this field not optional. 2004-09-03 Tomer Levi * opc-crx.c: Rename 'popma' to 'popa', remove 'pushma'. Fix parameter to 'm[t|f]csr' insns. 2004-08-30 Nathanael Nerode * configure.in: Autoupdate to autoconf 2.59. * aclocal.m4: Rebuild with aclocal 1.4p6. * configure: Rebuild with autoconf 2.59. * Makefile.in: Rebuild with automake 1.4p6 (picking up bfd changes for autoconf 2.59 on the way). * config.in: Rebuild with autoheader 2.59. 2004-08-27 Richard Sandiford * frv-desc.[ch], frv-opc.[ch]: Regenerated. 2004-07-30 Michal Ludvig * i386-dis.c (GRPPADLCK): Renamed to GRPPADLCK1 (GRPPADLCK2): New define. (twobyte_has_modrm): True for 0xA6. (grps): GRPPADLCK2 for opcode 0xA6. 2004-07-29 Alexandre Oliva Introduce SH2a support. * sh-opc.h (arch_sh2a_base): Renumber. (arch_sh2a_nofpu_base): Remove. (arch_sh_base_mask): Adjust. (arch_opann_mask): New. (arch_sh2a, arch_sh2a_nofpu): Adjust. (arch_sh2a_up, arch_sh2a_nofpu_up): Likewise. (sh_table): Adjust whitespace. 2004-02-24 Corinna Vinschen * sh-opc.h (arch_sh2a_nofpu_up): New. Use instead of arch_sh2a_up in instruction list throughout. (arch_sh2a_up): Redefine to include fpu instruction set. Use instead of arch_sh2a in instruction list throughout. (arch_sh2e_up): Accomodate above changes. (arch_sh2_up): Ditto. 2004-02-20 Corinna Vinschen * sh-opc.h: Add arch_sh2a_nofpu to arch_sh2_up. 2004-02-18 Corinna Vinschen * sh-dis.c (print_insn_sh): Add bfd_mach_sh2a_nofpu handling. * sh-opc.h (arch_sh2a_nofpu): New. (arch_sh2a_up): New, defines sh2a and sh2a_nofpu. (sh_table): Change all arch_sh2a to arch_sh2a_up unless FPU instruction. 2004-01-20 DJ Delorie * sh-dis.c (print_insn_sh): SH2A does not have 'X' fp regs. 2003-12-29 DJ Delorie * sh-opc.c (sh_nibble_type, sh_arg_type, arch_2a, arch_2e_up, sh_opcode_info, sh_table): Add sh2a support. (arch_op32): New, to tag 32-bit opcodes. * sh-dis.c (print_insn_sh): Support sh2a opcodes. 2003-12-02 Michael Snyder * sh-opc.h (arch_sh2a): Add. * sh-dis.c (arch_sh2a): Handle. * sh-opc.h (arch_sh2_up): Fix up to include arch_sh2a. 2004-07-27 Tomer Levi * crx-opc.c: Add popx,pushx insns. Indent code, fix comments. 2004-07-22 Nick Clifton PR/280 * h8300-dis.c (bfd_h8_disassemble): Do not dump raw bytes for the insns - this is done by objdump itself. * h8500-dis.c (print_insn_h8500): Likewise. 2004-07-21 Jan Beulich * i386-dis.c (OP_E): Show rip-relative addressing in 64-bit mode regardless of address size prefix in effect. (ptr_reg): Size or address registers does not depend on rex64, but on the presence of an address size override. (OP_MMX): Use rex.x only for xmm registers. (OP_EM): Use rex.z only for xmm registers. 2004-07-20 Maciej W. Rozycki * mips-opc.c (mips_builtin_opcodes): Move coprocessor 2 move/branch operations to the bottom so that VR5400 multimedia instructions take precedence in disassembly. 2004-07-20 Maciej W. Rozycki * mips-opc.c (mips_builtin_opcodes): Remove the MIPS32 ISA-specific "break" encoding. 2004-07-13 Elvis Chiang * arm-opc.h: Fix typo in comment. 2004-07-11 Andreas Schwab * m68k-dis.c (m68k_valid_ea): Fix typos in last change. 2004-07-09 Andreas Schwab * m68k-dis.c (m68k_valid_ea): Check validity of all codes. 2004-07-07 Tomer Levi * Makefile.am (CFILES): Add crx-dis.c, crx-opc.c. (ALL_MACHINES): Add crx-dis.lo, crx-opc.lo. (crx-dis.lo): New target. (crx-opc.lo): Likewise. * Makefile.in: Regenerate. * configure.in: Handle bfd_crx_arch. * configure: Regenerate. * crx-dis.c: New file. * crx-opc.c: New file. * disassemble.c (ARCH_crx): Define. (disassembler): Handle ARCH_crx. 2004-06-29 James E Wilson * ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds. * ia64-asmtab.c: Regnerate. 2004-06-28 Alan Modra * ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf. (extract_fxm): Don't test dialect. (XFXFXM_MASK): Include the power4 bit. (XFXM): Add p4 param. (powerpc_opcodes): Add mfocrf and mtocrf. Adjust mtcr. 2004-06-27 Alexandre Oliva 2003-07-21 Richard Sandiford * disassemble.c (disassembler): Handle bfd_mach_h8300sxn. 2004-06-26 Alan Modra * ppc-opc.c (BH, XLBH_MASK): Define. (powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl. 2004-06-24 Alan Modra * i386-dis.c (x_mode): Comment. (two_source_ops): File scope. (float_mem): Correct fisttpll and fistpll. (float_mem_mode): New table. (dofloat): Use it. (OP_E): Correct intel mode PTR output. (ptr_reg): Use open_char and close_char. (PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for operands. Set two_source_ops. 2004-06-15 Alan Modra * arc-ext.c (build_ARC_extmap): Use bfd_get_section_size instead of _raw_size. 2004-06-08 Jakub Jelinek * ia64-gen.c (in_iclass): Handle more postinc st and ld variants. * ia64-asmtab.c: Rebuilt. 2004-06-01 Martin Schwidefsky * s390-opc.txt: Correct architecture mask for some opcodes. lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available in the esa mode as well. 2004-05-28 Andrew Stubbs * sh-dis.c (target_arch): Make unsigned. (print_insn_sh): Replace (most of) switch with a call to sh_get_arch_from_bfd_mach(). Also use new architecture flags system. * sh-opc.h: Redefine architecture flags values. Add sh3-nommu architecture. Reorganise _up macros so they make more visual sense. (SH_MERGE_ARCH_SET): Define new macro. (SH_VALID_BASE_ARCH_SET): Likewise. (SH_VALID_MMU_ARCH_SET): Likewise. (SH_VALID_CO_ARCH_SET): Likewise. (SH_VALID_ARCH_SET): Likewise. (SH_MERGE_ARCH_SET_VALID): Likewise. (SH_ARCH_SET_HAS_FPU): Likewise. (SH_ARCH_SET_HAS_DSP): Likewise. (SH_ARCH_UNKNOWN_ARCH): Likewise. (sh_get_arch_from_bfd_mach): Add prototype. (sh_get_arch_up_from_bfd_mach): Likewise. (sh_get_bfd_mach_from_arch_set): Likewise. (sh_merge_bfd_arc): Likewise. 2004-05-24 Peter Barada * m68k-dis.c(print_insn_m68k): Strip body of diassembly out into new match_insn_m68k function. Loop over canidate matches and select first that completely matches. * m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit. * m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea to verify addressing for MAC/EMAC. * m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC reigster halves since 'fpu' and 'spl' look misleading. * m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases. * m68k-opc.c: Rearragne mac/emac cases to use longest for first, tighten up match masks. * m68k-opc.c: Add 'size' field to struct m68k_opcode. Produce 'size' from special case code in print_insn_m68k to determine decode size of insns. 2004-05-19 Alan Modra * ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as well as when -mpower4. 2004-05-13 Nick Clifton * po/fr.po: Updated French translation. 2004-05-05 Peter Barada * m68k-dis.c(print_insn_m68k): Add new chips, use core variants in arch_mask. Only set m68881/68851 for 68k chips. * m68k-op.c: Switch from ColdFire chips to core variants. 2004-05-05 Alan Modra PR 147. * ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC. 2004-04-29 Ben Elliston * ppc-opc.c (XCMPL): Renmame to XOPL. Update users. (powerpc_opcodes): Add "dbczl" instruction for PPC970. 2004-04-22 Kaz Kojima * sh-dis.c (print_insn_sh): Print the value in constant pool as a symbol if it looks like a symbol. 2004-04-22 Peter Barada * m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on appropriate ColdFire architectures. (print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC mask addressing. Add EMAC instructions, fix MAC instructions. Remove macmw/macml/msacmw/msacml instructions since mask addressing now supported. 2004-04-20 Jakub Jelinek * sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define. (fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to suffix. Use fmov*x macros, create all 3 fpsize variants in one macro. Adjust all users. 2004-04-15 Anil Paranjpe * h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs" separately. 2004-03-30 Kazuhiro Inaoka * m32r-asm.c: Regenerate. 2004-03-29 Stan Shebs * mpw-config.in, mpw-make.sed: Remove MPW support files, no longer used. 2004-03-19 Alan Modra * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. * po/opcodes.pot: Regenerate. 2004-03-16 Alan Modra * ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle PPC_OPERANDS_GPR_0. * ppc-opc.c (RA0): Define. (RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0. (RAOPT): Rename from RAO. Update all uses. (powerpc_opcodes): Use RA0 as appropriate. 2004-03-15 Aldy Hernandez * ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg. 2004-03-15 Alan Modra * sparc-dis.c (print_insn_sparc): Update getword prototype. 2004-03-12 Michal Ludvig * i386-dis.c (GRPPLOCK): Delete. (grps): Delete GRPPLOCK entry. 2004-03-12 Alan Modra * i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions. (M, Mp): Use OP_M. (None, PADLOCK_SPECIAL, PADLOCK_0): Delete. (GRPPADLCK): Define. (dis386): Use NOP_Fixup on "nop". (dis386_twobyte): Use GRPPADLCK on opcode 0xa7. (twobyte_has_modrm): Set for 0xa7. (padlock_table): Delete. Move to.. (grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence and clflush. (print_insn): Revert PADLOCK_SPECIAL code. (OP_E): Delete sfence, lfence, mfence checks. 2004-03-12 Jakub Jelinek * i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg. (INVLPG_Fixup): New function. (PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag. 2004-03-12 Michal Ludvig * i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines. (dis386_twobyte): Opcode 0xa7 is PADLOCK_0. (padlock_table): New struct with PadLock instructions. (print_insn): Handle PADLOCK_SPECIAL. 2004-03-12 Alan Modra * i386-dis.c (grps): Use clflush by default for 0x0fae/7. (OP_E): Twiddle clflush to sfence here. 2004-03-08 Nick Clifton * po/de.po: Updated German translation. 2003-03-03 Andrew Stubbs * sh-dis.c (print_insn_sh): Don't disassemble fp instructions in nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu. * sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions accordingly. 2004-03-01 Richard Sandiford * frv-asm.c: Regenerate. * frv-desc.c: Regenerate. * frv-desc.h: Regenerate. * frv-dis.c: Regenerate. * frv-ibld.c: Regenerate. * frv-opc.c: Regenerate. * frv-opc.h: Regenerate. 2004-03-01 Richard Sandiford * frv-desc.c, frv-opc.c: Regenerate. 2004-03-01 Richard Sandiford * frv-desc.c, frv-opc.c, frv-opc.h: Regenerate. 2004-02-26 Andrew Stubbs * sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4. Also correct mistake in the comment. 2004-02-26 Andrew Stubbs * sh-dis.c (print_insn_sh): Add REG_N_D nibble type to ensure that double registers have even numbers. Add REG_N_B01 for nn01 (binary 01) nibble to ensure that reserved instruction 0xfffd does not decode the same as 0xfdfd (ftrv). * sh-opc.h: Add REG_N_D nibble type and use it whereever REG_N refers to a double register. Add REG_N_B01 nibble type and use it instead of REG_NM in ftrv. Adjust the bit patterns in a few comments. 2004-02-25 Aldy Hernandez * ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst. 2004-02-20 Aldy Hernandez * ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat. 2004-02-20 Aldy Hernandez * ppc-opc.c (powerpc_opcodes): Add m*ivor35. 2004-02-20 Aldy Hernandez * ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34, mtivor32, mtivor33, mtivor34. 2004-02-19 Aldy Hernandez * ppc-opc.c (powerpc_opcodes): Add mfmcar. 2004-02-10 Petko Manolov * arm-opc.h Maverick accumulator register opcode fixes. 2004-02-13 Ben Elliston * m32r-dis.c: Regenerate. 2004-01-27 Michael Snyder * sh-opc.h (sh_table): "fsrra", not "fssra". 2004-01-23 Andrew Over * sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten contraints. 2004-01-19 Andrew Over * sparc-opc.c (sparc_opcodes) : Fix args. 2004-01-19 Alan Modra * i386-dis.c (OP_E): Print scale factor on intel mode sib when not 1. Don't print scale factor on AT&T mode when index missing. 2004-01-16 Alexandre Oliva * m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended when loaded into XR registers. 2004-01-14 Richard Sandiford * frv-desc.h: Regenerate. * frv-desc.c: Regenerate. * frv-opc.c: Regenerate. 2004-01-13 Michael Snyder * sh-dis.c (print_insn_sh): Allocate 4 bytes for insn. 2004-01-09 Paul Brook * arm-opc.h (arm_opcodes): Move generic mcrr after known specific opcodes. 2004-01-07 Daniel Jacobowitz * Makefile.am (libopcodes_la_DEPENDENCIES) (libopcodes_la_LIBADD): Revert 2003-05-17 change. Add explanatory comment about the problem. * Makefile.in: Regenerate. 2004-01-06 Alexandre Oliva 2003-12-19 Alexandre Oliva * frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some cut&paste errors in shifting/truncating numerical operands. 2003-08-04 Alexandre Oliva * frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo. (parse_uslo16): Likewise. (parse_uhi16): Parse gotoffhi and gotofffuncdeschi. (parse_d12): Parse gotoff12 and gotofffuncdesc12. (parse_s12): Likewise. 2003-08-04 Alexandre Oliva * frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo. (parse_uslo16): Likewise. (parse_uhi16): Parse gothi and gotfuncdeschi. (parse_d12): Parse got12 and gotfuncdesc12. (parse_s12): Likewise. 2004-01-02 Albert Bartoszko * msp430-dis.c (msp430_doubleoperand): Check for an 'add' instruction which looks similar to an 'rla' instruction. For older changes see ChangeLog-0203 Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: