2009-10-14 Tomas Hurka <tom@hukatronic.cz> PR 969 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl. 2009-10-13 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg and vex_w_done. 2009-10-07 Michael Eager <eager@eagercon.com> * microblaze-dis.c: Add include for microblaze-dis.h, eliminate local extern decls. * microblaze-dis.h: New. 2009-10-06 Nick Clifton <nickc@redhat.com> * po/fi.po: Updated Finnish translation. 2009-10-03 Andreas Schwab <schwab@linux-m68k.org> * opc2c.c: Include "libiberty.h" and <errno.h>. (orig_filename): Constify. (dump_lines): Fix line number directive. (main): Set orig_filename to basename of input file. Use xstrerror. * Makefile.am (rx-dis.lo): Remove explicit dependencies. ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD) instead of $(EXEEXT). (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use $(LINK_FOR_BUILD). Link with libiberty. (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD). (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c. * Makefile.in: Regenerated. * rx-decode.c: Regenerated. 2009-10-03 Paul Reed <paulreed@paddedcell.com> * arm-dis.c (print_insn): Check symtab_size not *symtab. 2009-10-02 H.J. Lu <hongjiu.lu@intel.com> * i386-opc.tbl: Drop Disp64 on jump and loop instructions. * i386-tbl.h: Regenerated. 2009-10-02 Peter Bergner <bergner@vnet.ibm.com> * ppc-dis.c (ppc_opts): Add "476" entry. * ppc-opc.c (PPC476): Define. (powerpc_opcodes): Update mnemonics where required for 476. 2009-10-01 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2. * ppc-dis.c (ppc_opts): Likewise. Rename "ppca2" to "a2". 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com> * crx-dis.c (match_opcode): Truncate mcode to 32-bit. 2009-09-29 DJ Delorie <dj@redhat.com> * Makefile.am: Add RX files. * configure.in: Add support for RX target. * disassemble.c: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * opc2c.c: New file. * rx-decode.c: New file. * rx-decode.opc: New file. * rx-dis.c: New file. 2009-09-29 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux", "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes. 2009-09-25 Michael Eager <eager@eagercon.com> * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address, microblaze_decode_insn): Add declarations. (get_delay_slots_microblaze): Remove. 2009-09-25 Martin Thuresson <martint@google.com> Update sources to make arc and arm targets compile cleanly with -Wc++-compat: * arc-dis.c Fix casts. * arc-ext.c: Add casts. * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous enum. 2009-09-24 H.J. Lu <hongjiu.lu@intel.com> * i386-gen.c (opcode_modifiers): Remove Vex256. (set_bitfield): Handle XXX=V. * i386-opc.h (Vex): Update comments. (Vex256): Removed. (VexNDS): Updated. (i386_opcode_modifier): Change vex to 2 bits. Remove vex256. * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2. * i386-tbl.h: Regenerated. 2009-09-23 Nick Clifton <nickc@redhat.com> * po/fr.po: Updated French translation. 2009-09-21 Ben Elliston <bje@au.ibm.com> Peter Bergner <bergner@vnet.ibm.com> * ppc-dis.c (ppc_opts): Add "ppca2" entry. * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx., eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx, icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx., ici mnemonics. (ERAT_T): New operand. (XWC_MASK): New mask. (XOPL2): New macro. (PPCA2): Define. 2009-09-18 Nick Clifton <nickc@redhat.com> * po/es.po: Updated Spanish translation. * po/vi.po: Updated Vietnamese translation. 2009-09-15 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if disp == -disp. 2009-09-14 Nick Clifton <nickc@redhat.com> * po/nl.po: Updated Dutch translation. 2009-09-11 Nick Clifton <nickc@redhat.com> * po/opcodes.pot: Updated by the Translation project. 2009-09-11 Martin Thuresson <martint@google.com> Updated sources to compile cleanly with -Wc++-compat: * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level. * ldcref.c: Add casts. * ldctor.c: Add casts. * ldexp.c * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level. * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer. * ldlang.h (enum statement_enum): Move to top level. * ldmain.c: Add casts. * ldwrite.c: Add casts. * lexsup.c: Add casts. (enum control_enum): Move to top level. * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer. 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> * s390-dis.c (print_insn_s390): Avoid 'long long'. 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands. (print_insn_s390): Signextend and shift pcrel operands before printing. 2009-09-09 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to VEX_LEN_AE_R_X_M_0 in comments. 2009-09-08 DJ Delorie <dj@redhat.com> * mep-opc.c: Regenerate. 2009-09-08 Andreas Schwab <schwab@linux-m68k.org> * z8kgen.c (struct op): Replace unused flavor with id. (opt): Remove extra xorb entry. (func): Use id field as fallback. (sub): Return new string, caller changed. (internal): Allocate end marker. Assign unique id before sorting. (gas): Likewise. Fix loop end condition. * z8k-opc.h: Regenerate. 2009-09-08 Alan Modra <amodra@bigpond.net.au> * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64. 2009-09-07 Alan Modra <amodra@bigpond.net.au> * z8kgen.c (func): Fix thinko last patch. 2009-09-07 Alan Modra <amodra@bigpond.net.au> * z8kgen.c (func): Stabilize qsort of identically named entries. * z8k-opc.h: Regenerate. 2009-09-07 Tristan Gingold <gingold@adacore.com> * po/opcodes.pot: Regenerate. 2009-09-07 Alan Modra <amodra@bigpond.net.au> * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst. * configure: Regenerate. * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete. (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use.. (i386-gen, ia64-gen, z8kgen): ..here. * Makefile.in: Regenerate. 2009-09-07 Tristan Gingold <gingold@adacore.com> * z8k-opc.h: Regenerate. 2009-09-05 Martin Thuresson <martin@mtme.org> * ia64-dis.c (print_insn_ia64): Update code to use renamed member. * m88k-dis.c (m88kdis): Rename variable class to in_class. * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol): Rename argument class to symbol_class. 2009-09-04 Jie Zhang <jie.zhang@analog.com> * bfin-dis.c (decode_pseudodbg_assert_0): Change according to the new encoding of DBGA, DBGAH, and DBGAL. (_print_insn_bfin): Likewise. 2009-09-03 Jie Zhang <jie.zhang@analog.com> * bfin-dis.c (_print_insn_bfin): Don't declare. (print_insn_bfin): Don't declare. (dregs_pair): Remove. (ignore_bits): Remove. (ccstat): Remove. 2009-09-03 Jie Zhang <jie.zhang@analog.com> * bfin-dis.c (IS_DREG): Define. (IS_PREG): Define. (IS_AREG): Define. (IS_GENREG): Define. (IS_DAGREG): Define. (IS_SYSREG): Define. (decode_REGMV_0): Check illegal register move instructions. 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com> * Makefile.am (BUILD_LIBINTL): New variable. (i386-gen$(EXEEXT_FOR_BUILD)): Use it. (ia64-gen$(EXEEXT_FOR_BUILD)): And here. (z8kgen$(EXEEXT_FOR_BUILD)): And here. * Makefile.in: Regenerate. 2009-09-01 DJ Delorie <dj@redhat.com> * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. * mep-opc.c: Regenerate. 2009-09-01 Tristan Gingold <gingold@adacore.com> * makefile.vms: Ported to Itanium VMS. Remove useless targets and dependencies. Remove unused FORMAT variable. * configure.com: New file to create build.com DCL script for Itanium VMS or Alpha VMS. 2009-08-29 Martin Thuresson <martin@mtme.org> * cris-dis.c (bytes_to_skip): Update code to use new name. * i386-dis.c (putop): Update code to use new name. * i386-gen.c (process_i386_opcodes): Update code to use new name. * i386-opc.h (struct template): Rename struct template to insn_template. Update code accordingly. * i386-tbl.h (i386_optab): Update type to use new name. * ia64-dis.c (print_insn_ia64): Rename variable template to template_val. * tic30-dis.c (struct instruction, get_tic30_instruction): Update code to use new name. * tic54x-dis.c (has_lkaddr, get_insn_size) (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn): Update code to use new name. * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab): Update type to new name. * z8kgen.c (internal, gas): Rename variable new to new_op. 2009-08-28 H.J. Lu <hongjiu.lu@intel.com> * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS. Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD. (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD. * Makefile.in: Regenerated. 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> * Makefile.am (bfdlibdir, bfdincludedir): Move definition ... [INSTALL_LIBBFD]: ... here, ... [INSTALL_LIBBFD]: ... and empty overrides here. [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable. [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it. * Makefile.in: Regenerate. * configure: Regenerate. 2009-08-26 Philippe De Muyter <phdm@macqel.be> * m68k-dis.c (print_insn_arg): Add movecr register names for coldfire v4e families. 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> * Makefile.am (SUBDIRS): Build '.' before 'po'. (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY) (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables. (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite using *BUILD variables, depend upon $(BUILD_LIBIBERTY). (i386-gen.o): New rule. ($(srcdir)/i386-init.h): Adjust. (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h. (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise. (ia64-gen.o): New rule. (ia64_asmtab_deps): New variable. ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise. (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c. (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust likewise. (s390-opc.tab): Adjust. (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New rules. (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h. * Makefile.in: Regenerate. * z8kgen.c (gas): Avoid '/*' in comment. * z8k-opc.h (func): Regenerate. 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c, i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and msp430-dis.c added. (LIBOPCODES_CFILES): New variable, adding to TARGET_LIBOPCODES_CFILES also non-target library sources. (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator files. (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES). (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES). * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> * Makefile.am (libopcodes_la_LDFLAGS): Initialize early. [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition. [INSTALL_LIBBFD] (bfdinclude_DATA): New. [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New. [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la is built shared even if it is not to be installed. (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES) (install_libopcodes, uninstall_libopcodes): Remove. (AM_CPPFLAGS): Renamed from ... (INCLUDES): ... this. * Makefile.in: Regenerate. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add 1.11, foreign, no-dist. (MKDEP, m32c_opc_h): Remove variables. (disassemble.lo): Rewrite using automake-style dependency tracking rules; only list the dependency upon the primary source file, but no included headers. (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo) (i386-gen.o, ia64-gen.o): Remove dependency statements. (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to ensure all dependency fragments are included in the Makefile. (s390-opc.lo): Depend on s390-opc.tab. (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules. (mkdep section): Remove. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. * Makefile.am (install-pdf, install-html): Remove. * Makefile.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. 2009-08-06 Michael Eager <eager@eagercon.com> * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to CFILES, microblaze-dis.lo to ALL_MACHINES, targets. * Makefile.in: Regenerate. * configure.in: Add bfd_microblaze_arch target. * configure: Regenerate. * disassemble.c: Define ARCH_microblaze, return print_insn_microblaze(). * microblaze-dis.c: New MicroBlaze disassembler. * microblaze-opc.h: New MicroBlaze opcode definitions. * microblaze-opcm.h: New MicroBlaze opcode types. 2009-07-25 H.J. Lu <hongjiu.lu@intel.com> * configure.in: Handle bfd_l1om_arch. * disassemble.c (disassembler): Likewise. * configure: Regenerated. * i386-dis.c (print_insn): Handle bfd_mach_l1om and bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM. * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM. Add CPU_L1OM_FLAGS. (cpu_flags): Add CpuL1OM. (set_bitfield): Take an argument to set the value field. (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY). (process_i386_opcode_modifier): Updated. (process_i386_operand_type): Likewise. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. * i386-opc.h (CpuL1OM): New. (CpuXsave): Updated. (i386_cpu_flags): Add cpul1om. 2009-07-24 Jan Beulich <jbeulich@novell.com> * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add frstpm. * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed. (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP. (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387. * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP): Define. (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687, and cpufisttp. * i386-opc.tbl: Qualify floating point instructions by their respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos, and fsincos to be avilable only on 387. Fix fstsw ax to be available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm, and frstpm. * i386-init.h, i386-tbl.h: Regenerate. 2009-07-20 Nick Clifton <nickc@redhat.com> PR 10288 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register offset or indexed based addressing mode 3. 2009-07-14 Nick Clifton <nickc@redhat.com> PR 10288 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1 patterns. (arm_decode_shift): Catch illegal register based shifts. (print_insn_arm): Properly handle negative register r0 post-indexed addressing. 2009-07-10 Doug Kwan <dougkwan@google.com> * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only lower 32 bits of long types to make hexadecimal output consistent on both 32-bit and 64-bit hosts. 2009-07-10 Alan Modra <amodra@bigpond.net.au> * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h, * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h, * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h, * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h, * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h, * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c, * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c, * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h, * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h, * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h, * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h, * xstormy16-opc.c, * xstormy16-opc.h: Regenerate. 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw> * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus. 2009-07-07 Nick Clifton <nickc@redhat.com> PR 10288 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled addressing modes. 2009-07-06 DJ Delorie <dj@redhat.com> * mep-desc.c: Regenerate. * mep-desc.h: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> * i386-opc.h (CpuFMA4): Add CpuFMA4. (i386_cpu_flags): New. * i386-gen.c: Add CPU_FMA4_FLAGS. * i386-opc.tbl: Add FMA4 instructions. * i386-tbl.h: Regenerate. * i386-init.h: Regenerate. * i386-dis.c (OP_VEX_FMA): New. Handle FMA4. (OP_XMM_VexW): Ditto. (OP_EX_VexW): Ditto. (VEXI4_Fixup): Ditto. (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros. (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New. (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New. (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New. (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New. (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New. (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New. (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New. (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New. (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New. (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New. (get_vex_imm8): New. handle FMA4. (OP_EX_VexReg): Ditto. 2009-06-30 Nick Clifton <nickc@redhat.com> PR 10288 * arm-dis.c (coprocessor): Print the LDC and STC versions of the LFM and SFM instructions as comments,. Improve consistency of formatting for instructions displayed as comments and decimal values displayed with their hexadecimal equivalents. Formatting tidy ups. 2009-06-29 Nick Clifton <nickc@redhat.com> PR 10288 * arm-dis.c (enum opcode_sentinels): New: Used to mark the boundary between variaant and generic coprocessor instuctions. (coprocessor): Use it. Fix architecture version of MCRR and MRRC instructions. (arm_opcdes): Fix patterns for STRB and STRH instructions. (print_insn_coprocessor): Check architecture and extension masks. Print a hexadecimal version of any decimal constant that is outside of the range of -16 to +32. (print_arm_address): Add a return value of the offset used in the adress, if it is worth printing a hexadecimal version of it. (print_insn_neon): Print a hexadecimal version of any decimal constant that is outside of the range of -16 to +32. (print_insn_arm): Likewise. (print_insn_thumb16): Likewise. (print_insn_thumb32): Likewise. PR 10297 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description of an undefined instruction. (arm_opcodes): Use it. (thumb_opcod): Use it. (thumb32_opc): Use it. 2009-06-23 DJ Delorie <dj@redhat.com> * mep-desc.c: Regenerate. * mep-desc.h: Regenerate. * mep-dis.c: Regenerate. * mep-ibld.c: Regenerate. * mep-opc.c: Regenerate. * mep-asm.c: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-06-22 Nick Clifton <nickc@redhat.com> * po/fi.po: Updated Finish translation. 2009-06-22 Alan Modra <amodra@bigpond.net.au> * m32c-asm.c: Regenerate. 2009-06-22 Alan Modra <amodra@bigpond.net.au> * score-dis.c (print_insn_score48, print_insn_score32): Move default case label to proper lexical block. * score7-dis.c (print_insn_score32): Likewise. 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com> * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT, MASK_RX_0RRD_OPT): New instruction formats with optional arguments. * s390-opc.txt (nopr, nop): Use new instruction format. 2009-06-18 Nick Clifton <nickc@redhat.com> PR 10288 * arm-dis.c (print_insn_coprocessor): Check that a user specified ARM architecture supports the matched instruction. (print_insn_arm): Likewise. (select_arm_features): New function. Fills in the fields of an arm_feature_set structure based on a given arm machine number. (print_insn): Initialise an arm_feature_set structure. 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org> * vax-dis.c (is_function_entry): Return success for synthetic symbols too. (is_plt_tail): New function. (print_insn_vax): Decode PLT entry offset longword. 2009-06-15 Nick Clifton <nickc@redhat.com> PR 10186 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W instruction. PR 10173 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice. 2009-06-15 Nick Clifton <nickc@redhat.com> PR 10263 * arm-dis.c (print_insn): Ignore is_data if the user has requested the disassembly of data as well as instructions. 2009-06-11 Doug Evans <dje@sebabeach.org> * cgen.sh: Handle multiple simultaneous runs for parallel makes. 2009-06-11 Anthony Green <green@moxielogic.com> * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions. (moxie_form3_opc_info): Add branch instructions. * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL encoded instructions. 2009-06-06 Anthony Green <green@moxielogic.com> * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M. * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case. 2009-06-04 Alan Modra <amodra@bigpond.net.au> * dep-in.sed: Don't use \n in replacement part of s command. * Makefile.am (DEP1): LC_ALL for uniq. * Makefile.in: Regenerate. 2009-06-02 Nick Clifton <nickc@redhat.com> * po/nl.po: Updated Dutch translation. 2009-06-02 Tristan Gingold <gingold@adacore.com> * ia64-gen.c (parse_resource_users, print_dependency_table, add_dis_table_ent, finish_distable, insert_bit_table_ent, add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq, get_prefix_len, compute_completer_bits, insert_opcode_dependencies, insert_completer_entry, print_completer_entry, print_completer_table, opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions. 2009-05-28 DJ Delorie <dj@redhat.com> * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. 2009-05-26 DJ Delorie <dj@redhat.com> * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. * mep-desc.h: Regenerate. * mep-dis.c: Regenerate. * mep-ibld.c: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-05-26 Nick Clifton <nickc@redhat.com> * po/id.po: Updated Indonesian translation. * po/opcodes.pot: Updated template file. 2009-05-26 Alan Modra <amodra@bigpond.net.au> * dep-in.sed: Don't modify .o to .lo here. Output one filename per line with all lines having continuation backslash. Prefix first line with "A", following lines with "B". * Makefile.am (DEP): Don't use dep.sed here. (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use dep.sed here on dependencies, sort and uniq. * Makefile.in: Regenerate. 2009-05-25 Tristan Gingold <gingold@adacore.com> * makefile.vms (OPT): New variable. (CFLAGS): Update compilation flags. 2009-05-22 DJ Delorie <dj@redhat.com> * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. * mep-desc.h: Regenerate. * mep-dis.c: Regenerate. * mep-ibld.c: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> * i386-opc.h (Cpusse5): Delete. (i386_cpu_flags): Delete. * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc. * i386-opc.tbl: Remove SSE5 instructions. * i386-tbl.h: Regenerate. * i386-init.h: Regenerate. * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling. (print_drex_arg): Delete. (OP_DREX4): Delete. (OP_DREX3): Delete. (OP_DREX_ICMP): Delete. (OP_DREX_FCMP): Delete. (DREX_*): Delete. (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete. 2009-05-22 Alan Modra <amodra@bigpond.net.au> * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. 2009-05-19 DJ Delorie <dj@redhat.com> * mep-asm.c: Regenerate. * mep-opc.c: Regenerate. 2009-04-30 DJ Delorie <dj@redhat.com> * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. * mep-desc.h: Regenerate. * mep-dis.c: Regenerate. * mep-ibld.c: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-04-17 DJ Delorie <dj@redhat.com * mep-desc.c: Regenerate. * mep-ibld.c: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-04-15 Anthony Green <green@moxielogic.com> * moxie-opc.c, moxie-dis.c: Created. * Makefile.am: Build the moxie source files. * configure.in: Add moxie support. * Makefile.in, configure: Rebuilt. * disassemble.c (disassembler): Add moxie support. (ARCH_moxie): Define. 2009-04-15 Jan Beulich <jbeulich@novell.com> * i386-opc.tbl (protb, protw, protd, protq): Set opcode extension to None. (pshab, pshaw, pshad, pshaq): Likewise. * i386-tbl.h: Re-generate. 2009-04-08 DJ Delorie <dj@redhat.com * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. * mep-desc.h: Regenerate. * mep-dis.c: Regenerate. * mep-ibld.c: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-04-07 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation. Reorder entries so the extended mnemonics are listed before tlbilx. 2009-04-02 Peter Bergner <bergner@vnet.ibm.com> * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect due to -many/-Many. (print_insn_powerpc): Make sure we only deprecate instructions using the original dialect and not a modified dialect due to -Many handling. Move the handling of the condition register and default operands to the end of the if/else if/else chain. * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that instructions from newer processors are listed before older ones. <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors that have instructions with conflicting opcodes. 2009-04-01 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and E500MC entries. 2009-04-01 Christophe Lyon <christophe.lyon@st.com> * arm-dis.c (print_insn): Print BE8 opcodes in little endianness. 2009-03-30 Joseph Myers <joseph@codesourcery.com> * arm-dis.c (print_insn): Also check section matches in backwards search for mapping symbol. 2009-03-26 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (get_valid_dis386): Abort on unhandled table. 2009-03-18 Alan Modra <amodra@bigpond.net.au> * cgen-opc.c: Include alloca-conf.h rather than alloca.h. * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. * openrisc-opc.c: Regenerate. 2009-03-10 Nick Clifton <nickc@redhat.com> * po/id.po: Updated Indonesian translation. 2009-03-10 Alan Modra <amodra@bigpond.net.au> * ppc-dis.c: Include "opintl.h". (struct ppc_mopt, ppc_opts): New. (ppc_parse_cpu): New function. (powerpc_init_dialect): Use it. (print_ppc_disassembler_options): Dump options from ppc_opts. Internationalize message. 2009-03-06 Nick Clifton <nickc@redhat.com> * po/es.po: Updated Spanish translation. 2009-03-04 Alan Modra <amodra@bigpond.net.au> PR 6768 * configure.in: Test for ld --as-needed support. Link shared libopcodes against libm. * configure: Regenerate. 2009-03-03 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that instructions from newer processors are listed before older ones. 2009-03-03 Alan Modra <amodra@bigpond.net.au> * Makefile.am: Run "make dep-am". (HFILES): Move lm32-desc.h and lm32-opc.h from.. (CFILES): ..here. * Makefile.in: Regenerate. 2009-03-02 Qinwei <qinwei@sunnorth.com.cn> * score7-dis.c: New file. * Makefile.am: Add dependencies for score7-dis.c. * Makefile.in: Regenerate. * configure.in: Add score7-dis to score files. * configure: Regenerate. * score-dis.c: Add support for score7 architecture. * score-opc.h: Likewise. 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> * configure: Regenerate. 2009-02-27 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E. 2009-02-26 Peter Bergner <bergner@vnet.ibm.com> * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble the power7 and the isel instructions. * ppc-opc.c (insert_xc6, extract_xc6): New static functions. (insert_dm, extract_dm): Likewise. (XB6): Update comment to include XX2 form. (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK, XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New. (RemoveXX3DM): Delete. (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr", "mftgpr">: Deprecate for POWER7. <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte", "frsqrte.">: Deprecate the three operand form and enable the two operand form for POWER7 and later. <"wait">: Extend to accept optional parameter. Enable for POWER7. <"waitsrv", "waitimpl">: Add extended opcodes. <"ldbrx", "stdbrx">: Enable for POWER7. <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes. <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde", "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo", "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.", "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.", "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.", "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx", "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes. <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx", "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp", "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds", "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp", "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp", "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp", "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic", "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp", "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp", "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp", "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.", "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp", "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp", "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp", "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp", "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp", "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp", "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp", "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp", "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp", "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi", "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp", "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp", "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp", "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor", "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd", "xxspltw", "xxswapd">: Add VSX opcodes. 2009-02-23 H.J. Lu <hongjiu.lu@intel.com> * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4. (operand_types): Remove Vex_Imm4. * i386-opc.h (Vex_Imm4): Removed. (OTMax): Updated. (i386_operand_type): Remove vex_imm4. * i386-opc.tbl: Remove Vex_Imm4 comments. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2009-02-23 Richard Earnshaw <rearnsha@arm.com> * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for vq{r}shr{u}n.s64 insnstructions. 2009-02-19 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first operand to be a float point register (FRT/FRS). 2009-02-18 Adam Nemet <anemet@caviumnetworks.com> * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific dmfc2 and dmtc2 before the architecture-level variants. 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr> * fr30-opc.c: Regenerate. * frv-opc.c: Regenerate. * ip2k-opc.c: Regenerate. * iq2000-opc.c: Regenerate. * lm32-opc.c: Regenerate. * m32c-opc.c: Regenerate. * m32r-opc.c: Regenerate. * mep-opc.c: Regenerate. * mt-opc.c: Regenerate. * xc16x-opc.c: Regenerate. * xstormy16-opc.c: Regenerate. * tic54x-dis.c (print_instruction): Avoid compiler warning on sprintf call. 2009-02-12 Nathan Sidwell <nathan@codesourcery.com> * m68k-opc.c (m68k_opcodes): Add stldsr instruction. 2009-02-05 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c: Update copyright year. (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand ordering for POWER4 and later and use the correct Server ordering. 2009-02-04 H.J. Lu <hongjiu.lu@intel.com> AVX Programming Reference (January, 2009) * i386-dis.c (PREFIX_VEX_3A44): New. (VEX_LEN_3A44_P_2): Likewise. (PREFIX_VEX_3A48): Updated. (VEX_LEN_3A4C_P_2): Likewise. (prefix_table): Add PREFIX_VEX_3A44. (vex_table): Likewise. (vex_len_table): Add VEX_LEN_3A44_P_2. * i386-opc.tbl: Add PCLMUL + AVX instructions. * i386-tbl.h: Regenerated. 2009-02-03 Sandip Matte <sandip@rmicorp.com> * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define. (mips_arch_choices): Add XLR entry. * mips-opc.c (XLR): Define. (mips_builtin_opcodes): Add XLR instructions. 2009-02-03 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-pdf target. * po/Make-in: Add install-pdf target. * Makefile.in: Regenerate. 2009-02-02 DJ Delorie <dj@redhat.com> * mep-asm.c: Regenerate. * mep-desc.c: Regenerate. * mep-desc.h: Regenerate. * mep-dis.c: Regenerate. * mep-ibld.c: Regenerate. * mep-opc.c: Regenerate. * mep-opc.h: Regenerate. 2009-01-29 Mark Mitchell <mark@codesourcery.com> * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd, qsub, and qdsub. 2009-01-28 Chao-ying Fu <fu@mips.com> * mips-opc.c (suxc1): Add the flag of FP_D. 2009-01-20 Alan Modra <amodra@bigpond.net.au> * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c, * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c, * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c, * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c, * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c, * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c, * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c, * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate. 2009-01-16 Alan Modra <amodra@bigpond.net.au> * configure.in (commonbfdlib): Delete. (SHARED_LIBADD): Add pic libiberty if such is available. * configure: Regenerate. * po/POTFILES.in: Regenerate. 2009-01-14 Peter Bergner <bergner@vnet.ibm.com> * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated. * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two operand form and enable the four operand form for POWER6 and later. <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the three operand form for POWER6 and later. 2009-01-14 Mike Frysinger <vapier@gentoo.org> * bfin-dis.c (OUTS): Use "%s" as format string. 2009-01-13 H.J. Lu <hongjiu.lu@intel.com> * i386-gen.c (cpu_flag_init): Remove a white space. (operand_type_init): Likewise. 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence. * i386-tbl.h: Regenerated. 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB, subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS, subS, xorS and cmpS. 2009-01-10 H.J. Lu <hongjiu.lu@intel.com> * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS. (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush and CpuSYSCALL. (lineno): Removed. (set_bitfield): Take an argument, lineno. Don't report lineno on error if it is -1. (process_i386_cpu_flag): Take an argument, lineno. (process_i386_opcode_modifier): Likewise. (process_i386_operand_type): Likewise. (output_i386_opcode): Likewise. (opcode_hash_entry): Add lineno. (process_i386_opcodes): Updated. (process_i386_registers): Likewise. (process_i386_initializers): Likewise. * i386-opc.h (CpuP4): Removed. (CpuK6): Likewise. (CpuK8): Likewise. (CpuClflush): New. (CpuSYSCALL): Likewise. (CpuMMX): Updated. (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add cpuclflush and cpusyscall. * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause, syscall and sysret. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2009-01-09 H.J. Lu <hongjiu.lu@intel.com> * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS. (cpu_flags): Add CpuRdtscp. (set_bitfield): Remove CpuSledgehammer check. * i386-opc.h (CpuRdtscp): New. (CpuLM): Updated. (i386_cpu_flags): Add cpurdtscp. * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2009-01-09 Peter Bergner <bergner@vnet.ibm.com> * ppc-opc.c (PPCNONE): Define. (NOPOWER4): Delete. (powerpc_opcodes): Initialize the new "deprecated" field. 2009-01-06 H.J. Lu <hongjiu.lu@intel.com> AVX Programming Reference (December, 2008) * i386-dis.c (VEX_LEN_2B_M_0): Removed. (VEX_LEN_E7_P_2_M_0): Likewise. (VEX_LEN_2C_P_1): Updated. (VEX_LEN_E8_P_2): Likewise. (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0. (mod_table): Likewise. * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps. * i386-tbl.h: Regenerated. 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> * i386-gen.c (process_copyright): Update for 2009. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> AVX Programming Reference (December, 2008) * i386-dis.c (OP_VEX_FMA): Removed. (OP_EX_VexW): Likewise. (OP_EX_VexImmW): Likewise. (OP_XMM_VexW): Likewise. (VEXI4_Fixup): Likewise. (VPERMIL2_Fixup): Likewise. (VexI4): Likewise. (VexFMA): Likewise. (Vex128FMA): Likewise. (EXVexW): Likewise. (EXdVexW): Likewise. (EXqVexW): Likewise. (EXVexImmW): Likewise. (XMVexW): Likewise. (VPERMIL2): Likewise. (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise. (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise. (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise. (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise. (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise. (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise. (get_vex_imm8): Likewise. (OP_EX_VexReg): Likewise. vpermil2_op): Likewise. (EXVexWdq): New. (vex_w_dq_mode): Likewise. (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise. (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise. (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise. (es_reg): Updated. (PREFIX_VEX_38DB): Likewise. (PREFIX_VEX_3A4A): Likewise. (PREFIX_VEX_3A60): Likewise. (PREFIX_VEX_3ADF): Likewise. (VEX_LEN_3ADF_P_2): Likewise. (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A, PREFIX_VEX_3A5C...PREFIX_VEX_3A5F, PREFIX_VEX_3A68...PREFIX_VEX_3A6F and PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add PREFIX_VEX_3896...PREFIX_VEX_389F, PREFIX_VEX_38A6...PREFIX_VEX_38AF and PREFIX_VEX_38B6...PREFIX_VEX_38BF. (vex_table): Likewise. (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2. (putop): Support "%XW". (intel_operand_size): Handle vex_w_dq_mode. * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS. * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA instructions. Add new FMA instructions. * i386-tbl.h: Regenerated. 2009-01-02 Matthias Klose <doko@ubuntu.com> * or32-opc.c (or32_print_register, or32_print_immediate, disassemble_insn): Don't rely on undefined sprintf behaviour. For older changes see ChangeLog-2008 Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: