2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-tbl.h (QL_FIX2FP_H, QL_FP2FIX_H): New.
	(QL_INT2FP_H, QL_FP2INT_H): New.
	(QL_FP2_H, QL_FP3_H, QL_FP4_H): New
	(QL_DST_H): New.
	(QL_FCCMP_H): New.
	(aarch64_opcode_table): Add 16-bit variants of scvt, ucvtf,
	fcvtzs, fcvtzu, fcvtns, fcvtnu, scvtf, ucvtf, fcvtas, fcvtau,
	fmov, fcvtpos, fcvtpu, fcvtms, fcvtmu, fcvtzs, fcvtzu, fccmp,
	fccmpe, fcmp, fcmpe, fabs, fneg, fsqrt, frintn, frintp, frintm,
	frintz, frinta, frintx, frinti, fmul, fdiv, fadd, fsub, fmax,
	fmin, fmaxnm, fminnm, fnmul, fmadd, fmsub, fnmadd, fnmsub and
	fcsel.

2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (half_conv_t): New.
        (expand_fp_imm): Replace is_dp flag with the parameter size to
	specify the number of bytes for the required expansion.  Treat
	a 16-bit expansion like a 32-bit expansion.  Add check for an
	unsupported size request.  Update comment.
	(aarch64_print_operand): Update to support 16-bit floating point
	values.  Update for changes to expand_fp_imm.

2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-tbl.h (aarch64_feature_fp_f16): New.
	(FP_F16): New.

2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-tbl.h (aarchr64_opcode_table): Update "rev", add
	"rev64".

2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-asm-2.c: Regenerate.
	* aarch64-asm.c (convert_bfc_to_bfm): New.
	(convert_to_real): Add case for OP_BFC.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-dis.c: (convert_bfm_to_bfc): New.
	(convert_to_alias): Add case for OP_BFC.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-opc.c (operand_general_constraint_met_p): Weaken assert
	to allow width operand in three-operand instructions.
	* aarch64-tbl.h (QL_BF1): New.
	(aarch64_feature_v8_2): New.
	(ARMV8_2): New.
	(aarch64_opcode_table): Add "bfc".

2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-dis.c: Weaken assert.
	* aarch64-gen.c: Include the instruction in the list of its
	possible aliases.

2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (aarch64_sys_regs): Add "id_aa64mmfr2_el1".
	(aarch64_sys_reg_supported_p): Add ARMv8.2 system register
	feature test.

2015-11-23  Tristan Gingold  <gingold@adacore.com>

	* arm-dis.c (print_insn): Also set is_thumb for Mach-O.

2015-11-20  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (aarch64_sys_regs): Add spsr_el12, elr_el12,
	sctlr_el12, cpacr_el12, ttbr1_el2, ttbr0_el12, ttbr1_el12,
	tcr_el12, afsr0_el12, afsr1_el12, esr_el12, far_el12, mair_el12,
	amair_el12, vbar_el12, contextidr_el2, contextidr_el12,
	cntkctl_el12, cntp_tval_el02, cntp_ctl_el02, cntp_cval_el02,
	cntv_tval_el02, cntv_ctl_el02, cntv_cval_el02, cnthv_tval_el2,
	cnthv_ctl_el2, cnthv_cval_el2.
	(aarch64_sys_reg_supported_p): Update for the new system
	registers.

2015-11-20  Nick Clifton  <nickc@redhat.com>

	PR binutils/19224
	* h8300-dis.c (bfd_h8_disassemble): Remove redundant if clause.

2015-11-20  Nick Clifton  <nickc@redhat.com>

	* po/zh_CN.po: Updated simplified Chinese translation.

2015-11-19  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (operand_general_constraint_met_p): Check validity
	of MSR PAN immediate operand.

2015-11-16  Nick Clifton  <nickc@redhat.com>

	* rx-dis.c (condition_names): Replace always and never with
	invalid, since the always/never conditions can never be legal.

2015-11-13  Tristan Gingold  <gingold@adacore.com>

	* configure: Regenerate.

2015-11-11  Alan Modra  <amodra@gmail.com>
	    Peter Bergner <bergner@vnet.ibm.com>

	* ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries.
	Add PPC_OPCODE_VSX3 to the vsx entry.
	(powerpc_init_dialect): Set default dialect to power9.
	* ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd,
	insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1,
	extract_l1 insert_xtq6, extract_xtq6): New static functions.
	(insert_esync): Test for illegal L operand value.
	(DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6,
	XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA,
	XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK,
	XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3,
	PPCVSX3): New defines.
	(powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu,
	fcmpo, ftdiv, ftsqrt>: Use XBF_MASK.
	<mcrxr>: Use XBFRARB_MASK.
	<addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq.,
	bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc.,
	cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first,
	cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx,
	lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll,
	lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw,
	modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last,
	rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx,
	stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx,
	subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh,
	vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh.,
	vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd,
	vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d,
	vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx,
	vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq,
	vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd,
	vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait,
	xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp,
	xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp,
	xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz,
	xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp,
	xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp,
	xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo,
	xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo,
	xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo,
	xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp,
	xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp,
	xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp,
	xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw,
	xxinsertw, xxperm, xxpermr, xxspltib>: New instructions.
	<doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9.
	<tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands.

2015-11-02  Nick Clifton  <nickc@redhat.com>

	* rx-decode.opc (rx_decode_opcode): Decode extra NOP
	instructions.
	* rx-decode.c: Regenerate.

2015-11-02  Nick Clifton  <nickc@redhat.com>

	* rx-decode.opc (rx_disp): If the displacement is zero, set the
	type to RX_Operand_Zero_Indirect.
	* rx-decode.c: Regenerate.
	* rx-dis (print_insn): Handle RX_Operand_Zero_Indirect.

2015-10-28  Yao Qi  <yao.qi@linaro.org>

	* aarch64-dis.c	(aarch64_decode_insn): Add one argument
	noaliases_p.  Update comments.  Pass noaliases_p rather than
	no_aliases to aarch64_opcode_decode.
	(print_insn_aarch64_word): Pass no_aliases to
	aarch64_decode_insn.

2015-10-27  Vinay  <Vinay.G@kpit.com>

	PR binutils/19159
	* rl78-decode.opc (MOV): Added offset to DE register in index
	addressing mode.
	* rl78-decode.c: Regenerate.

2015-10-27  Vinay Kumar  <vinay.g@kpit.com>

	PR binutils/19158
	* rl78-decode.opc: Add 's' print operator to instructions that
	access system registers.
	* rl78-decode.c: Regenerate.
	* rl78-dis.c (print_insn_rl78_common): Decode all system
	registers.

2015-10-27  Vinay Kumar  <vinay.g@kpit.com>

	PR binutils/19157
	* rl78-decode.opc: Add 'a' print operator to mov instructions
	using stack pointer plus index addressing.
	* rl78-decode.c: Regenerate.

2015-10-14  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* s390-opc.c: Fix comment.
	* s390-opc.txt: Change instruction type for troo, trot, trto, and
	trtt to RRF_U0RER since the second parameter does not need to be a
	register pair.

2015-10-08  Nick Clifton  <nickc@redhat.com>

	* arc-dis.c (print_insn_arc): Initiallise insn array.

2015-10-07  Yao Qi  <yao.qi@linaro.org>

	* aarch64-dis.c (aarch64_ext_sysins_op): Access field
	'name' rather than 'template'.
	* aarch64-opc.c (aarch64_print_operand): Likewise.

2015-10-07  Claudiu Zissulescu <claziss@synopsys.com>

	* arc-dis.c: Revamped file for ARC support
	* arc-dis.h: Likewise.
	* arc-ext.c: Likewise.
	* arc-ext.h: Likewise.
	* arc-opc.c: Likewise.
	* arc-fxi.h: New file.
	* arc-regs.h: Likewise.
	* arc-tbl.h: Likewise.

2015-10-02  Yao Qi  <yao.qi@linaro.org>

	* aarch64-dis.c	(disas_aarch64_insn): Remove static.  Change
	argument insn type to aarch64_insn.  Rename to ...
	(aarch64_decode_insn): ... it.
	(print_insn_aarch64_word): Caller updated.

2015-10-02  Yao Qi  <yao.qi@linaro.org>

	* aarch64-dis.c (disas_aarch64_insn): Remove argument PC.
	(print_insn_aarch64_word): Caller updated.

2015-09-29  Dominik Vogt  <vogt@linux.vnet.ibm.com>

	* s390-mkopc.c (main): Parse htm and vx flag.
	* s390-opc.txt: Mark instructions from the hardware transactional
	memory and vector facilities with the "htm"/"vx" flag.

2015-09-28  Nick Clifton  <nickc@redhat.com>

	* po/de.po: Updated German translation.

2015-09-28  Tom Rix  <tom@bumblecow.com>

	* ppc-opc.c (PPC500): Mark some opcodes as invalid

2015-09-23  Nick Clifton  <nickc@redhat.com>

	* bfin-dis.c (fmtconst): Remove unnecessary call to the abs
	function.
	* tic30-dis.c (print_branch): Likewise.
	* cgen-asm.c (cgen_parse_signed_integer): Cast integer to signed
	value before left shifting.
	* fr30-ibld.c (fr30_cgen_extract_operand): Likewise.
	* hppa-dis.c (print_insn_hppa): Likewise.
	* mips-dis.c (mips_cp0sel_names_mipsr5900): Delete unused static
	array.
	* msp430-dis.c (msp430_singleoperand): Likewise.
	(msp430_doubleoperand): Likewise.
	(print_insn_msp430): Likewise.
	* nds32-asm.c (parse_operand): Likewise.
	* sh-opc.h (MASK): Likewise.
	* v850-dis.c (get_operand_value): Likewise.

2015-09-22  Nick Clifton  <nickc@redhat.com>

	* rx-decode.opc (bwl): Use RX_Bad_Size.
	(sbwl): Likewise.
	(ubwl): Likewise.  Rename to ubw.
	(uBWL): Rename to uBW.
	Replace all references to uBWL with uBW.
	* rx-decode.c: Regenerate.
	* rx-dis.c (size_names): Add entry for RX_Bad_Size.
	(opsize_names): Likewise.
	(print_insn_rx): Detect and report RX_Bad_Size.

2015-09-22  Anton Blanchard  <anton@samba.org>

	* ppc-opc.c (powerpc_opcodes): Add mfdscr, mfctrl, mtdscr and mtctrl.

2015-08-25  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-dis.c (print_insn_sparc): Handle the privileged register
	%pmcdper.

2015-08-24  Jan Stancek  <jstancek@redhat.com>

	* i386-dis.c (print_insn): Fix decoding of three byte operands.

2015-08-21  Alexander Fomin  <alexander.fomin@intel.com>

	PR binutils/18257
	* i386-dis.c: Use MOD_TABLE for most of mask instructions.
	(MOD enum): Add MOD_VEX_W_0_0F41_P_0_LEN_1,
	MOD_VEX_W_1_0F41_P_0_LEN_1, MOD_VEX_W_0_0F41_P_2_LEN_1,
	MOD_VEX_W_1_0F41_P_2_LEN_1, MOD_VEX_W_0_0F42_P_0_LEN_1,
	MOD_VEX_W_1_0F42_P_0_LEN_1, MOD_VEX_W_0_0F42_P_2_LEN_1,
	MOD_VEX_W_1_0F42_P_2_LEN_1, MOD_VEX_W_0_0F44_P_0_LEN_1,
	MOD_VEX_W_1_0F44_P_0_LEN_1, MOD_VEX_W_0_0F44_P_2_LEN_1,
	MOD_VEX_W_1_0F44_P_2_LEN_1, MOD_VEX_W_0_0F45_P_0_LEN_1,
	MOD_VEX_W_1_0F45_P_0_LEN_1, MOD_VEX_W_0_0F45_P_2_LEN_1,
	MOD_VEX_W_1_0F45_P_2_LEN_1, MOD_VEX_W_0_0F46_P_0_LEN_1,
	MOD_VEX_W_1_0F46_P_0_LEN_1, MOD_VEX_W_0_0F46_P_2_LEN_1,
	MOD_VEX_W_1_0F46_P_2_LEN_1, MOD_VEX_W_0_0F47_P_0_LEN_1,
	MOD_VEX_W_1_0F47_P_0_LEN_1, MOD_VEX_W_0_0F47_P_2_LEN_1,
	MOD_VEX_W_1_0F47_P_2_LEN_1, MOD_VEX_W_0_0F4A_P_0_LEN_1,
	MOD_VEX_W_1_0F4A_P_0_LEN_1, MOD_VEX_W_0_0F4A_P_2_LEN_1,
	MOD_VEX_W_1_0F4A_P_2_LEN_1, MOD_VEX_W_0_0F4B_P_0_LEN_1,
	MOD_VEX_W_1_0F4B_P_0_LEN_1, MOD_VEX_W_0_0F4B_P_2_LEN_1,
	MOD_VEX_W_0_0F91_P_0_LEN_0, MOD_VEX_W_1_0F91_P_0_LEN_0,
	MOD_VEX_W_0_0F91_P_2_LEN_0, MOD_VEX_W_1_0F91_P_2_LEN_0,
	MOD_VEX_W_0_0F92_P_0_LEN_0, MOD_VEX_W_0_0F92_P_2_LEN_0,
	MOD_VEX_W_0_0F92_P_3_LEN_0, MOD_VEX_W_1_0F92_P_3_LEN_0,
	MOD_VEX_W_0_0F93_P_0_LEN_0, MOD_VEX_W_0_0F93_P_2_LEN_0,
	MOD_VEX_W_0_0F93_P_3_LEN_0, MOD_VEX_W_1_0F93_P_3_LEN_0,
	MOD_VEX_W_0_0F98_P_0_LEN_0, MOD_VEX_W_1_0F98_P_0_LEN_0,
	MOD_VEX_W_0_0F98_P_2_LEN_0, MOD_VEX_W_1_0F98_P_2_LEN_0,
	MOD_VEX_W_0_0F99_P_0_LEN_0, MOD_VEX_W_1_0F99_P_0_LEN_0,
	MOD_VEX_W_0_0F99_P_2_LEN_0, MOD_VEX_W_1_0F99_P_2_LEN_0,
	MOD_VEX_W_0_0F3A30_P_2_LEN_0, MOD_VEX_W_1_0F3A30_P_2_LEN_0,
	MOD_VEX_W_0_0F3A31_P_2_LEN_0, MOD_VEX_W_1_0F3A31_P_2_LEN_0,
	MOD_VEX_W_0_0F3A32_P_2_LEN_0, MOD_VEX_W_1_0F3A32_P_2_LEN_0,
	MOD_VEX_W_0_0F3A33_P_2_LEN_0, MOD_VEX_W_1_0F3A33_P_2_LEN_0.
	(vex_w_table): Replace terminals with MOD_TABLE entries for
	most of mask instructions.

2015-08-17  Alan Modra  <amodra@gmail.com>

	* cgen.sh: Trim trailing space from cgen output.
	* ia64-gen.c (print_dependency_table): Don't generate trailing space.
	(print_dis_table): Likewise.
	* opc2c.c (dump_lines): Likewise.
	(orig_filename): Warning fix.
	* ia64-asmtab.c: Regenerate.

2015-08-13  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* arm-dis.c (print_insn_arm): Disassembling for all targets V6
	and higher with ARM instruction set will now mark the 26-bit
	versions of teq,tst,cmn and cmp as UNPREDICTABLE.
	(arm_opcodes): Fix for unpredictable nop being recognized as a
	teq.

2015-08-12  Simon Dardis  <simon.dardis@imgtec.com>

	* micromips-opc.c (micromips_opcodes): Re-order table so that move
	based on 'or' is first.
	* mips-opc.c (mips_builtin_opcodes): Ditto.

2015-08-11  Nick Clifton  <nickc@redhat.com>

	PR 18800
	* aarch64-tbl.h (aarch64_opcode_table): Fix mask for SIMD EXT
	instruction.

2015-08-10  Robert Suchanek  <robert.suchanek@imgtec.com>

	* mips-opc.c (mips_builtin_opcodes): Add "sigrie".

2015-08-07  Amit Pawar <Amit.Pawar@amd.com>

	* i386-gen.c: Remove CpuFMA4 from CPU_ZNVER1_FLAGS.
	* i386-init.h: Regenerated.

2015-07-30  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/13571
	* i386-dis.c (MOD_0FC3): New.
	(PREFIX_0FC3): Renamed to ...
	(PREFIX_MOD_0_0FC3): This.
	(dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
	(prefix_table): Replace Ma with Ev on movntiS.
	(mod_table): Add MOD_0FC3.

2015-07-27  H.J. Lu  <hongjiu.lu@intel.com>

	* configure: Regenerated.

2015-07-23  Alan Modra  <amodra@gmail.com>

	PR 18708
	* i386-dis.c (get64): Avoid signed integer overflow.

2015-07-22  Alexander Fomin  <alexander.fomin@intel.com>

	PR binutils/18631
	* i386-dis-evex.h (EVEX_W_0F78_P_2): Replace "EXxmmq" with
	"EXEvexHalfBcstXmmq" for the second operand.
	(EVEX_W_0F79_P_2): Likewise.
	(EVEX_W_0F7A_P_2): Likewise.
	(EVEX_W_0F7B_P_2): Likewise.

2015-07-16  Alessandro Marzocchi  <alessandro.marzocchi@gmail.com>

	* arm-dis.c (print_insn_coprocessor): Added support for quarter
	float bitfield format.
	(coprocessor_opcodes): Changed VFP vmov reg,immediate to use new
	quarter float bitfield format.

2015-07-14  H.J. Lu  <hongjiu.lu@intel.com>

	* configure: Regenerated.

2015-07-03  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
	* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries.  Add
	PPC_OPCODE_7450 to 7450 entry.  Add PPC_OPCODE_750 to 750cl entry.

2015-07-01  Sandra Loosemore  <sandra@codesourcery.com>
	    Cesar Philippidis  <cesar@codesourcery.com>

	* nios2-dis.c (nios2_extract_opcode): New.
	(nios2_disassembler_state): New.
	(nios2_find_opcode_hash): Use mach parameter to select correct
	disassembler state.
	(nios2_print_insn_arg): Extend to support new R2 argument letters
	and formats.
	(print_insn_nios2): Check for 16-bit instruction at end of memory.
	* nios2-opc.c (nios2_builtin_regs): Add R2 register attributes.
	(NIOS2_NUM_OPCODES): Rename to...
	(NIOS2_NUM_R1_OPCODES): This.
	(nios2_r2_opcodes): New.
	(NIOS2_NUM_R2_OPCODES): New.
	(nios2_num_r2_opcodes): New.
	(nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): New.
	(nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): New.
	(nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): New.
	(nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): New.
	(nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings):	New.

2015-06-30  Amit Pawar  <Amit.Pawar@amd.com>

	* i386-dis.c (OP_Mwaitx): New.
	(rm_table): Add monitorx/mwaitx.
	* i386-gen.c (cpu_flag_init): Add CpuMWAITX to CPU_BDVER4_FLAGS
	and CPU_ZNVER1_FLAGS.  Add CPU_MWAITX_FLAGS.
	(operand_type_init): Add CpuMWAITX.
	* i386-opc.h (CpuMWAITX): New.
	(i386_cpu_flags): Add cpumwaitx.
	* i386-opc.tbl: Add monitorx and mwaitx.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2015-06-22  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (insert_ls): Test for invalid LS operands.
	(insert_esync): New function.
	(LS, WC): Use insert_ls.
	(ESYNC): Use insert_esync.

2015-06-22  Nick Clifton  <nickc@redhat.com>

	* dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
	requested region lies beyond it.
	* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
	looking for 32-bit insns.
	* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
	data.
	* sh-dis.c (print_insn_sh): Likewise.
	* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
	blocks of instructions.
	* vax-dis.c (print_insn_vax): Check that the requested address
	does not clash with the stop_vma.

2015-06-19  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
	* ppc-opc.c (FXM4): Add non-zero optional value.
	(TBR): Likewise.
	(SXL): Likewise.
	(insert_fxm): Handle new default operand value.
	(extract_fxm): Likewise.
	(insert_tbr): Likewise.
	(extract_tbr): Likewise.

2015-06-16  Matthew Wahab  <matthew.wahab@arm.com>

	* arch64-opc.c (aarch64_sys_regs): Add "id_mmfr4_el1".

2015-06-16  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* arm-dis.c (print_insn_coprocessor): Avoid negative shift.

2015-06-12  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c: Add comment accidentally removed by old commit.
	(MTMSRD_L): Delete.

2015-06-04  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c: (powerpc_opcodes) <hwsync>: New extended mnemonic.

2015-06-04  Nick Clifton  <nickc@redhat.com>

	PR 18474
	* msp430-dis.c (msp430_nooperands): Fix check for emulated insns.

2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>

	* arm-dis.c (arm_opcodes): Add "setpan".
	(thumb_opcodes): Add "setpan".

2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>

	* arm-dis.c (select_arm_features): Rework to avoid used of redefined
	macros.

2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-tbl.h (aarch64_feature_rdma): New.
	(RDMA): New.
	(aarch64_opcode_table): Add "sqrmlah" and "sqrdmlsh" instructions.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-tbl.h (aarch64_feature_lor): New.
	(LOR): New.
	(aarch64_opdocde_table): Add "ldlar", "ldlarb", "ldlarh", "stllr",
	"stllrb", "stllrh".
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2015-06-01  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (F_ARCHEXT): New.
	(aarch64_sys_regs): Add "pan".
	(aarch64_sys_reg_supported_p): New.
	(aarch64_pstatefields): Add "pan".
	(aarch64_pstatefield_supported_p): New.

2015-06-01  Jan Beulich  <jbeulich@suse.com>

	* i386-tbl.h: Regenerate.

2015-06-01  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (print_insn): Swap rounding mode specifier and
	general purpose register in Intel mode.

2015-06-01  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: New IntelSyntax entries for vcvt{,u}si2s{d,s}.
	* i386-tbl.h: Regenerate.

2015-05-18  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Remove Disp32 from AMD64 direct call/jmp.
	* i386-init.h: Regenerated.

2015-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutis/18386
	* i386-dis.c: Add comments for '@'.
	(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
	(enum x86_64_isa): New.
	(isa64): Likewise.
	(print_i386_disassembler_options): Add amd64 and intel64.
	(print_insn): Handle amd64 and intel64.
	(putop): Handle '@'.
	(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
	* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
	* i386-opc.h (AMD64): New.
	(CpuIntel64): Likewise.
	(i386_cpu_flags): Add cpuamd64 and cpuintel64.
	* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
	Mark direct call/jmp without Disp16|Disp32 as Intel64.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2015-05-14  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (IH) New define.
	(powerpc_opcodes) <wait>: Do not enable for POWER7.
	<tlbie>: Add RS operand for POWER7.
	<slbia>: Add IH operand for POWER6.

2015-05-11  H.J. Lu  <hongjiu.lu@intel.com>

	* opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit
	direct branch.
	(jmp): Likewise.
	* i386-tbl.h: Regenerated.

2015-05-11  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.ac: Support bfd_iamcu_arch.
	* disassemble.c (disassembler): Support bfd_iamcu_arch.
	* i386-gen.c (cpu_flag_init): Add CPU_IAMCU_FLAGS and
	CPU_IAMCU_COMPAT_FLAGS.
	(cpu_flags): Add CpuIAMCU.
	* i386-opc.h (CpuIAMCU): New.
	(i386_cpu_flags): Add cpuiamcu.
	* configure: Regenerated.
	* i386-init.h: Likewise.
	* i386-tbl.h: Likewise.

2015-05-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutis/18386
	* i386-dis.c (X86_64_E8): New.
	(X86_64_E9): Likewise.
	Update comments on 'T', 'U', 'V'.  Add comments for '^'.
	(dis386): Replace callT/jmpT with X86_64_E8/X86_64_E9.
	(x86_64_table): Add X86_64_E8 and X86_64_E9.
	(mod_table): Replace {T|} with ^ on Jcall/Jmp.
	(putop): Handle '^'.
	(OP_J): Ignore the operand size prefix in 64-bit.  Don't check
	REX_W.

2015-04-30  DJ Delorie  <dj@redhat.com>

	* disassemble.c (disassembler): Choose suitable disassembler based
	on E_ABI.
	* rl78-decode.opc (rl78_decode_opcode): Take ISA parameter.  Use
	it to decode mul/div insns.
	* rl78-decode.c: Regenerate.
	* rl78-dis.c (print_insn_rl78): Rename to...
	(print_insn_rl78_common): ...this, take ISA parameter.
	(print_insn_rl78): New.
	(print_insn_rl78_g10): New.
	(print_insn_rl78_g13): New.
	(print_insn_rl78_g14): New.
	(rl78_get_disassembler): New.

2015-04-29  Nick Clifton  <nickc@redhat.com>

	* po/fr.po: Updated French translation.

2015-04-27  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (DCBT_EO): New define.
	(powerpc_opcodes) <lbarx>: Enable for POWER8 and later.
	<lharx>: Likewise.
	<stbcx.>: Likewise.
	<sthcx.>: Likewise.
	<waitrsv>: Do not enable for POWER7 and later.
	<waitimpl>: Likewise.
	<dcbt>: Default to the two operand form of the instruction for all
	"old" cpus.  For "new" cpus, use the operand ordering that matches
	whether the cpu is server or embedded.
	<dcbtst>: Likewise.

2015-04-27  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* s390-opc.c: New instruction type VV0UU2.
	* s390-opc.txt: Fix instruction types for VFCE, VLDE, VFSQ, WFK,
	and WFC.

2015-04-23  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ".
	* i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq,
	vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY.
	(vfpclasspd, vfpclassps): Add %XZ.

2015-04-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (PREFIX_UD_SHIFT): Removed.
	(PREFIX_UD_REPZ): Likewise.
	(PREFIX_UD_REPNZ): Likewise.
	(PREFIX_UD_DATA): Likewise.
	(PREFIX_UD_ADDR): Likewise.
	(PREFIX_UD_LOCK): Likewise.

2015-04-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (prefix_requirement): Removed.
	(print_insn): Don't set prefix_requirement.  Check
	dp->prefix_requirement instead of prefix_requirement.

2015-04-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/17898
	* i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
	(PREFIX_MOD_0_0FC7_REG_6): This.
	(PREFIX_MOD_3_0FC7_REG_6): New.
	(PREFIX_MOD_3_0FC7_REG_7): Likewise.
	(prefix_table): Replace PREFIX_0FC7_REG_6 with
	PREFIX_MOD_0_0FC7_REG_6.  Add PREFIX_MOD_3_0FC7_REG_6 and
	PREFIX_MOD_3_0FC7_REG_7.
	(mod_table): Replace PREFIX_0FC7_REG_6 with
	PREFIX_MOD_0_0FC7_REG_6.  Use PREFIX_MOD_3_0FC7_REG_6 and
	PREFIX_MOD_3_0FC7_REG_7.

2015-04-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (PREFIX_MANDATORY_REPZ): Removed.
	(PREFIX_MANDATORY_REPNZ): Likewise.
	(PREFIX_MANDATORY_DATA): Likewise.
	(PREFIX_MANDATORY_ADDR): Likewise.
	(PREFIX_MANDATORY_LOCK): Likewise.
	(PREFIX_MANDATORY): Likewise.
	(PREFIX_UD_SHIFT): Set to 8
	(PREFIX_UD_REPZ): Updated.
	(PREFIX_UD_REPNZ): Likewise.
	(PREFIX_UD_DATA): Likewise.
	(PREFIX_UD_ADDR): Likewise.
	(PREFIX_UD_LOCK): Likewise.
	(PREFIX_IGNORED_SHIFT): New.
	(PREFIX_IGNORED_REPZ): Likewise.
	(PREFIX_IGNORED_REPNZ): Likewise.
	(PREFIX_IGNORED_DATA): Likewise.
	(PREFIX_IGNORED_ADDR): Likewise.
	(PREFIX_IGNORED_LOCK): Likewise.
	(PREFIX_OPCODE): Likewise.
	(PREFIX_IGNORED): Likewise.
	(Bad_Opcode): Replace PREFIX_MANDATORY with 0.
	(dis386_twobyte): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
	(three_byte_table): Likewise.
	(mod_table): Likewise.
	(mandatory_prefix): Renamed to ...
	(prefix_requirement): This.
	(prefix_table): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
	Update PREFIX_90 entry.
	(get_valid_dis386): Check prefix_requirement to see if a prefix
	should be ignored.
	(print_insn): Replace mandatory_prefix with prefix_requirement.

2015-04-15  Renlin Li  <renlin.li@arm.com>

	* arm-dis.c (thumb32_opcodes): Define 'D' format control code,
	use it for ssat and ssat16.
	(print_insn_thumb32): Add handle case for 'D' control code.

2015-04-06  Ilya Tocar  <ilya.tocar@intel.com>
	    H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis-evex.h (evex_table): Fill prefix_requirement field.
	* i386-dis.c (PREFIX_MANDATORY_REPZ, PREFIX_MANDATORY_REPNZ,
	PREFIX_MANDATORY_DATA, PREFIX_MANDATORY_ADDR, PREFIX_MANDATORY_LOCK,
	PREFIX_UD_SHIFT, PREFIX_UD_REPZ, REFIX_UD_REPNZ, PREFIX_UD_DATA,
	PREFIX_UD_ADDR, PREFIX_UD_LOCK, PREFIX_MANDATORY): Define.
	(Bad_Opcode, FLOAT, DIS386, DIS386_PREFIX, THREE_BYTE_TABLE_PREFIX):
	Fill prefix_requirement field.
	(struct dis386): Add prefix_requirement field.
	(dis386): Fill prefix_requirement field.
	(dis386_twobyte): Ditto.
	(twobyte_has_mandatory_prefix_: Remove.
	(reg_table): Fill prefix_requirement field.
	(prefix_table): Ditto.
	(x86_64_table): Ditto.
	(three_byte_table): Ditto.
	(xop_table): Ditto.
	(vex_table): Ditto.
	(vex_len_table): Ditto.
	(vex_w_table): Ditto.
	(mod_table): Ditto.
	(bad_opcode): Ditto.
	(print_insn): Use prefix_requirement.
	(FGRPd9_2, FGRPd9_4, FGRPd9_5, FGRPd9_6, FGRPd9_7, FGRPda_5, FGRPdb_4,
	FGRPde_3, FGRPdf_4): Fill prefix_requirement field.
	(float_reg): Ditto.

2015-03-30  Mike Frysinger  <vapier@gentoo.org>

	* d10v-opc.c (d10v_reg_name_cnt): Convert old style prototype.

2015-03-29  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.in: Regenerated.

2015-03-25  Anton Blanchard  <anton@samba.org>

	* ppc-dis.c (disassemble_init_powerpc): Only initialise
	powerpc_opcd_indices and vle_opcd_indices once.

2015-03-25  Anton Blanchard  <anton@samba.org>

	* ppc-opc.c (powerpc_opcodes): Add slbfee.

2015-03-24  Terry Guo  <terry.guo@arm.com>

	* arm-dis.c (opcode32): Updated to use new arm feature struct.
	(opcode16): Likewise.
	(coprocessor_opcodes): Replace bit with feature struct.
	(neon_opcodes): Likewise.
	(arm_opcodes): Likewise.
	(thumb_opcodes): Likewise.
	(thumb32_opcodes): Likewise.
	(print_insn_coprocessor): Likewise.
	(print_insn_arm): Likewise.
	(select_arm_features): Follow new feature struct.

2015-03-17  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>

	* i386-dis.c (rm_table): Add clzero.
	* i386-gen.c (cpu_flag_init): Add new CPU_ZNVER1_FLAGS.
	Add CPU_CLZERO_FLAGS.
	(cpu_flags): Add CpuCLZERO.
	* i386-opc.h: Add CpuCLZERO.
	* i386-opc.tbl: Add clzero.
	* i386-init.h: Re-generated.
	* i386-tbl.h: Re-generated.

2015-03-13  Andrew Bennett  <andrew.bennett@imgtec.com>

	* mips-opc.c (decode_mips_operand): Fix constraint issues
	with u and y operands.

2015-03-13  Andrew Bennett  <andrew.bennett@imgtec.com>

	* mips-opc.c (mips_builtin_opcodes): Add evp and dvp instructions.

2015-03-10  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* s390-opc.c: Add new IBM z13 instructions.
	* s390-opc.txt: Likewise.

2015-03-10  Renlin Li  <renlin.li@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Remove strub, ldurb, ldursb,
	stur, ldur, sturh, ldurh, ldursh, ldursw, prfum F_HAS_ALIAS flag and
	related alias.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Likewise.
	* aarch64-opc-2.c: Likewise.

2015-03-03  Jiong Wang  <jiong.wang@arm.com>

	* arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.

2015-02-25  Oleg Endo  <olegendo@gcc.gnu.org>

	* sh-opc.h (clrs, sets): Mark as arch_sh3_nommu_up instead of
	arch_sh_up.
	(pref): Mark as arch_sh2a_nofpu_or_sh3_nommu_up instead of
	arch_sh2a_nofpu_or_sh4_nommu_nofpu_up.

2015-02-23  Vinay  <Vinay.G@kpit.com>

	* rl78-decode.opc (MOV): Added space between two operands for
	'mov' instruction in index addressing mode.
	* rl78-decode.c: Regenerate.

2015-02-19  Pedro Alves  <palves@redhat.com>

	* microblaze-dis.h [__cplusplus]: Wrap in extern "C".

2015-02-10  Pedro Alves  <palves@redhat.com>
	    Tom Tromey  <tromey@redhat.com>

	* microblaze-opcm.h (or, and, xor): Rename to microblaze_or,
	microblaze_and, microblaze_xor.
	* microblaze-opc.h (opcodes): Adjust.

2015-01-28  James Bowman  <james.bowman@ftdichip.com>

	* Makefile.am: Add FT32 files.
	* configure.ac: Handle FT32.
	* disassemble.c (disassembler): Call print_insn_ft32.
	* ft32-dis.c: New file.
	* ft32-opc.c: New file.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2015-01-28 Kuan-Lin Chen <kuanlinchentw@gmail.com>

	* nds32-asm.c (keyword_sr): Add new system registers.

2015-01-16  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* s390-dis.c (s390_extract_operand): Support vector register
	operands.
	(s390_print_insn_with_opcode): Support new operands types and add
	new handling of optional operands.
	* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
	and include opcode/s390.h instead.
	(struct op_struct): New field `flags'.
	(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
	(dumpTable): Dump flags.
	(main): Parse flags from the s390-opc.txt file.  Add z13 as cpu
	string.
	* s390-opc.c: Add new operands types, instruction formats, and
	instruction masks.
	(s390_opformats): Add new formats for .insn.
	* s390-opc.txt: Add new instructions.

2015-01-01  Alan Modra  <amodra@gmail.com>

	Update year range in copyright notice of all files.

For older changes see ChangeLog-2014

Copyright (C) 2015 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: