# # Unusual variables checked by this code: # NOP - four byte opcode for no-op (defaults to 0) # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start # INITIAL_READONLY_SECTIONS - at start of text segment # OTHER_READONLY_SECTIONS - other than .text .init .rodata ... # (e.g., .PARISC.milli) # OTHER_TEXT_SECTIONS - these get put in .text when relocating # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... # (e.g., .PARISC.global) # ATTRS_SECTIONS - at the end # OTHER_SECTIONS - at the end # EXECUTABLE_SYMBOLS - symbols that must be defined for an # executable (e.g., _DYNAMIC_LINK) # TEXT_START_SYMBOLS - symbols that appear at the start of the # .text section. # DATA_START_SYMBOLS - symbols that appear at the start of the # .data section. # OTHER_GOT_SYMBOLS - symbols defined just before .got. # OTHER_GOT_SECTIONS - sections just after .got. # OTHER_SDATA_SECTIONS - sections just after .sdata. # OTHER_BSS_SYMBOLS - symbols that appear at the start of the # .bss section besides __bss_start. # DATA_PLT - .plt should be in data segment, not text segment. # BSS_PLT - .plt should be in bss segment # TEXT_DYNAMIC - .dynamic in text segment, not data segment. # EMBEDDED - whether this is for an embedded system. # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set # start address of shared library. # INPUT_FILES - INPUT command of files to always include # WRITABLE_RODATA - if set, the .rodata section should be writable # INIT_START, INIT_END - statements just before and just after # combination of .init sections. # FINI_START, FINI_END - statements just before and just after # combination of .fini sections. # STACK_ADDR - start of a .stack section. # OTHER_SYMBOLS - symbols to place right at the end of the script. # # When adding sections, do note that the names of some sections are used # when specifying the start address of the next. # # Many sections come in three flavours. There is the 'real' section, # like ".data". Then there are the per-procedure or per-variable # sections, generated by -ffunction-sections and -fdata-sections in GCC, # and useful for --gc-sections, which for a variable "foo" might be # ".data.foo". Then there are the linkonce sections, for which the linker # eliminates duplicates, which are named like ".gnu.linkonce.d.foo". # The exact correspondences are: # # Section Linkonce section # .text .gnu.linkonce.t.foo # .rodata .gnu.linkonce.r.foo # .data .gnu.linkonce.d.foo # .bss .gnu.linkonce.b.foo # .sdata .gnu.linkonce.s.foo # .sbss .gnu.linkonce.sb.foo # .sdata2 .gnu.linkonce.s2.foo # .sbss2 .gnu.linkonce.sb2.foo # .debug_info .gnu.linkonce.wi.foo # .tdata .gnu.linkonce.td.foo # .tbss .gnu.linkonce.tb.foo # # Each of these can also have corresponding .rel.* and .rela.* sections. test -z "$ENTRY" && ENTRY=_start test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi test -z "${ELFSIZE}" && ELFSIZE=32 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" test "$LD_FLAG" = "N" && DATA_ADDR=. test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" DATA_SEGMENT_END="" if test -n "${COMMONPAGESIZE}"; then DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" fi INTERP=".interp ALIGN(4) : { *(.interp) }" PLT=".plt : { *(.plt) } :dynamic :dyn" DYNAMIC=".dynamic : { *(.dynamic) } :dynamic :dyn" RODATA=".rodata ALIGN(4) : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.directive) }" test -z "$GOT" && GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) } :dynamic :dyn" CTOR=".ctors ALIGN(4) : { ${CONSTRUCTING+${CTOR_START}} /* gcc uses crtbegin.o to find the start of the constructors, so we make sure it is first. Because this is a wildcard, it doesn't matter if the user does not actually link against crtbegin.o; the linker won't look for a file to match a wildcard. The wildcard also means that it doesn't matter which directory crtbegin.o is in. */ KEEP (*crtbegin.o(.ctors)) KEEP (*crtbegin?.o(.ctors)) /* We don't want to include the .ctor section from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) ${CONSTRUCTING+${CTOR_END}} } :text" DTOR=".dtors ALIGN(4) : { ${CONSTRUCTING+${DTOR_START}} KEEP (*crtbegin.o(.dtors)) KEEP (*crtbegin?.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) ${CONSTRUCTING+${DTOR_END}} } :text" STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : { ${RELOCATING+_stack = .;} *(.stack) } :data" # if this is for an embedded system, don't add SIZEOF_HEADERS. if [ -z "$EMBEDDED" ]; then test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" else test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" fi cat <<EOF OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", "${LITTLE_OUTPUT_FORMAT}") OUTPUT_ARCH(${OUTPUT_ARCH}) ${RELOCATING+ENTRY(${ENTRY})} ${RELOCATING+${LIB_SEARCH_DIRS}} ${RELOCATING+/* Do we need any of these for elf? __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} ${RELOCATING+${EXECUTABLE_SYMBOLS}} ${RELOCATING+${INPUT_FILES}} ${RELOCATING- /* For some reason, the Solaris linker makes bad executables if gld -r is used and the intermediate file has sections starting at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld bug. But for now assigning the zero vmas works. */} PHDRS { headers PT_PHDR PHDRS ; text PT_LOAD ; data PT_LOAD ; dyn PT_LOAD FLAGS (0) ; dynamic PT_DYNAMIC ; } SECTIONS { /* Read-only sections, merged into text segment: */ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}} ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}} ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}} ${CREATE_SHLIB-${INTERP}} ${INITIAL_READONLY_SECTIONS} .init ALIGN(4) : { ${RELOCATING+${INIT_START}} KEEP (*(.init)) ${RELOCATING+${INIT_END}} } :text =${NOP-0} .text ALIGN(4) : { ${RELOCATING+${TEXT_START_SYMBOLS}} *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) /* .gnu.warning sections are handled specially by elf32.em. */ *(.gnu.warning) ${RELOCATING+${OTHER_TEXT_SECTIONS}} } =${NOP-0} ${RELOCATING+${CTOR}} ${RELOCATING+${DTOR}} .fini ALIGN(4) : { ${RELOCATING+${FINI_START}} KEEP (*(.fini)) ${RELOCATING+${FINI_END}} } =${NOP-0} ${RELOCATING+PROVIDE (__etext = .);} ${RELOCATING+PROVIDE (_etext = .);} ${RELOCATING+PROVIDE (etext = .);} ${WRITABLE_RODATA-${RODATA}} .rodata1 ALIGN(4) : { *(.rodata1) } ExportTable ALIGN(4) : { KEEP (*(ExportTable)) } .eh_frame_hdr ALIGN(4) : { *(.eh_frame_hdr) } :text /* Adjust the address for the data segment. We want to adjust up to the same address within the page on the next page up. */ . = ALIGN(128) + (. & (128 - 1)); .preinit_array ${RELOCATING-0} : { ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}} KEEP (*(.preinit_array)) ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}} } .init_array ${RELOCATING-0} : { ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}} KEEP (*(SORT(.init_array.*))) KEEP (*(.init_array)) ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}} } .fini_array ${RELOCATING-0} : { ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}} KEEP (*(.fini_array)) KEEP (*(SORT(.fini_array.*))) ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}} } ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} .data ALIGN(4) : { ${RELOCATING+${DATA_START_SYMBOLS}} *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) ${CONSTRUCTING+SORT(CONSTRUCTORS)} } :data .data1 ALIGN(4) : { *(.data1) } :data .tdata ALIGN(4) : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } :data .tbss ALIGN(4) : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } :data .eh_frame ALIGN(4) : { KEEP (*(.eh_frame)) } :data .gcc_except_table ALIGN(4) : { *(.gcc_except_table) } :data ${WRITABLE_RODATA+${RODATA}} ${OTHER_READWRITE_SECTIONS} ${SDATA} ${OTHER_SDATA_SECTIONS} ${RELOCATING+_edata = .;} ${RELOCATING+PROVIDE (edata = .);} ${RELOCATING+__bss_start = .;} ${RELOCATING+${OTHER_BSS_SYMBOLS}} ${BSS_PLT+${PLT}} .bss ALIGN(4) : { *(.dynbss) *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) *(COMMON) /* Align here to ensure that the .bss section occupies space up to _end. Align after .bss to ensure correct alignment even if the .bss section disappears because there are no input sections. */ ${RELOCATING+. = ALIGN(${ALIGNMENT});} } :data ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} ${RELOCATING+. = ALIGN(${ALIGNMENT});} ${RELOCATING+${OTHER_END_SYMBOLS}} ${RELOCATING+_end = .;} ${RELOCATING+PROVIDE (end = .);} ${RELOCATING+${DATA_SEGMENT_END}} ${TEXT_DYNAMIC-${DYNAMIC}} ${TEXT_DYNAMIC+${DYNAMIC}} .hash ${RELOCATING-0} : { *(.hash) } :dynamic :dyn .dynsym ${RELOCATING-0} : { *(.dynsym) } :dynamic :dyn .dynstr ${RELOCATING-0} : { *(.dynstr) } :dynamic :dyn ${DATA_PLT-${BSS_PLT-${PLT}}} .got.plt : { *(.got.plt) } :dynamic :dyn .gnu.version ${RELOCATING-0} : { *(.gnu.version) } .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } EOF if [ "x$COMBRELOC" = x ]; then COMBRELOCCAT=cat else COMBRELOCCAT="cat > $COMBRELOC" fi eval $COMBRELOCCAT <<EOF .rel.init ${RELOCATING-0} : { *(.rel.init) } .rela.init ${RELOCATING-0} : { *(.rela.init) } .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } .rel.fini ${RELOCATING-0} : { *(.rel.fini) } .rela.fini ${RELOCATING-0} : { *(.rela.fini) } .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } ${OTHER_READONLY_RELOC_SECTIONS} .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } .rel.got ${RELOCATING-0} : { *(.rel.got) } .rela.got ${RELOCATING-0} : { *(.rela.got) } ${OTHER_GOT_RELOC_SECTIONS} .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } EOF if [ -n "$COMBRELOC" ]; then cat <<EOF .rel.dyn ${RELOCATING-0} : { EOF sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC cat <<EOF } .rela.dyn ${RELOCATING-0} : { EOF sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC cat <<EOF } EOF fi cat <<EOF .rel.plt ${RELOCATING-0} : { *(.rel.plt) } .rela.plt ${RELOCATING-0} : { *(.rela.plt) } ${OTHER_PLT_RELOC_SECTIONS} /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } .stab.exclstr 0 : { *(.stab.exclstr) } .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } /* DWARF debug sections. Symbols in the DWARF debugging sections are relative to the beginning of the section so we begin them at 0. */ /* DWARF 1 */ .debug 0 : { *(.debug) } .line 0 : { *(.line) } /* GNU DWARF 1 extensions */ .debug_srcinfo 0 : { *(.debug_srcinfo) } .debug_sfnames 0 : { *(.debug_sfnames) } /* DWARF 1.1 and DWARF 2 */ .debug_aranges 0 : { *(.debug_aranges) } .debug_pubnames 0 : { *(.debug_pubnames) } /* DWARF 2 */ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } .debug_abbrev 0 : { *(.debug_abbrev) } .debug_line 0 : { *(.debug_line) } .debug_frame 0 : { *(.debug_frame) } .debug_str 0 : { *(.debug_str) } .debug_loc 0 : { *(.debug_loc) } .debug_macinfo 0 : { *(.debug_macinfo) } /* SGI/MIPS DWARF 2 extensions */ .debug_weaknames 0 : { *(.debug_weaknames) } .debug_funcnames 0 : { *(.debug_funcnames) } .debug_typenames 0 : { *(.debug_typenames) } .debug_varnames 0 : { *(.debug_varnames) } ${STACK_ADDR+${STACK}} ${ATTRS_SECTIONS} ${OTHER_SECTIONS} ${RELOCATING+${OTHER_SYMBOLS}} ${RELOCATING+${DISCARDED}} } EOF